summaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap2/board-devkit8000.c
AgeCommit message (Collapse)AuthorFilesLines
2010-07-05OMAP2: Devkit8000: Fix regulator for power supplyThomas Weber1-1/+1
Devkit8000 uses the TPS65930 and not the TWL4030. The TPS65930 uses only a subset of the power supplies of the TWL4030. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05OMAP2: Devkit8000: Remove unused omap_board_configThomas Weber1-6/+0
omap_board_config is no longer used and thats why empty. This patch removes the empty omap_board_config. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05OMAP2: Devkit8000: Using gpio_is_valid macroThomas Weber1-4/+4
Using the macro gpio_is_valid for check of valid gpio pins. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05OMAP2: Devkit8000: Using the REGULATOR_SUPPLY macroThomas Weber1-20/+13
Replacing supplies with the REGULATOR_SUPPLY macro. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05OMAP2: Devkit8000: Remove en-/disable for tv panelThomas Weber1-12/+0
devkit8000_panel_enable_tv and devkit8000_panel_disable_tv are already done in DSS2 code. So they are no longer needed in board code. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05OMAP2: Devkit8000: Remove non existing vsim supplyThomas Weber1-22/+0
The Devkit8000 uses the cost reduced variant tps65930 of the twl4030. The TPS65930 only has vdd1, vdd2, vpll1, vio, vmmc1, vdac and vaux2. vaux2 is not used on Devkit8000. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05OMAP2: Devkit8000: Remove unneeded VDVI supplyThomas Weber1-5/+0
The VDVI power supply is no longer needed in board code with the new DSS2 interface. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05OMAP2: Devkit8000: Setup LCD resetKan-Ru Chen1-0/+11
This patch corrects the LCD reset pin configuration. Original code from early devkit8000 patch sets the TWL4030 GPIO_1 to EHCI_nOC and TWL4030_GPIO_MAX+1 to ledA. Indeed these two pins are both LCD_PWREN. Setup the lcd reset_gpio properly so it can be disabled when other display is turned on. Signed-off-by: Kan-Ru Chen <kanru@0xlab.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05OMAP2: Devkit8000: Enable DVI-D outputKan-Ru Chen1-0/+15
This patch corrects the DVI-D output setup of Devkit8000 Devkit8000 has different DVI reset pin with the BeagleBoard. On Devkit8000 the TWL4030 GPIO_7 is assigned to do the job. Signed-off-by: Kan-Ru Chen <kanru@0xlab.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05OMAP2: Devkit8000: change panel to generic panelThomas Weber1-1/+1
Choose the generic panel for lcd code of Devkit8000. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05OMAP2: Devkit8000: Cleanup for power suppliesThomas Weber1-6/+26
Corrected the wrong power supplies in devkit8000 code. Add supply for ads7846 to support the new regulator framework for touchscreen. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-20omap: Devkit8000: Add mux initializationThomas Weber1-0/+155
Initialize multiplexed pins with correct mode. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-24omap: Devkit8000: Remove unused pinsThomas Weber1-20/+0
Old code from original patch contains beagle board pins that are not available on the Devkit8000. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-24omap: Devkit8000: Change position of init callsThomas Weber1-4/+4
Change position of calling serial and ethernet initialization. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-24omap: Devkit8000: Remove unnecessary include fileThomas Weber1-1/+0
Remove include otg.h. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-24omap: Devkit8000: Fix typo in pin nameThomas Weber1-2/+2
Replace wrong sdr_cke[01] with sdrc_cke[01]. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-24omap: Devkit8000: Fix typo in suppliesThomas Weber1-1/+1
Replace wrong vdss_dsi with vdds_dsi. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-24omap: Devkit8000: Fix wrong usb port on Devkit8000Thomas Weber1-2/+2
Disable the nonexistent ehci port on Devkit8000. Signed-off-by: Thomas Weber <weber@corscience.de> Acked-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-03-11omap2/3/4: ehci: avoid compiler error with touchbookFelipe Balbi1-1/+1
the early_param() call in board-omap3touchbook.c expands to: static const char __setup_str_early_touchbook_revision[] __section(.init.rodata) _aligned(1) = tbr; [...] and we have a non-const variable being added to the same section: static struct ehci_hcd_omap_platform_data ehci_pdata __section(.init.rodata); because of that, gcc generates a section type conflict which can (and actually should) be avoided by marking const every variable marked with __initconst. This patch fixes that for the ehci_hdc_omap_platform_data. Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-20omap: musb: Pass board specific data from board fileMaulik Mankad1-1/+7
Pass board specific data for MUSB (like interface_type, mode etc) from board file by defining board specific structure. Each board file can define this structure based on its requirement and pass this information to the driver. Signed-off-by: Maulik Mankad <x0082077@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Felipe Balbi <felipe.balbi@nokia.com> Cc: David Brownell <david-b@pacbell.net> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Gupta Ajay Kumar <ajay.gupta@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-20Add minimal support for DevKit8000Thomas Weber1-0/+691
These patches add board support for the Timll DevKit8000. The DevKit8000 is a beagle board clone from Timll, sold by armkits.com. The DevKit8000 has RS232 serial port, LCD, DVI-D, S-Video, Ethernet, SD/MMC, keyboard, camera, SPI, I2C, USB and JTAG interface. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-08-24 19:43:55 +0300