summaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap2/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2011-01-08Merge branch 'usb-next' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 * 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (144 commits) USB: add support for Dream Cheeky DL100B Webmail Notifier (1d34:0004) USB: serial: ftdi_sio: add support for TIOCSERGETLSR USB: ehci-mxc: Setup portsc register prior to accessing OTG viewport USB: atmel_usba_udc: fix freeing irq in usba_udc_remove() usb: ehci-omap: fix tll channel enable mask usb: ohci-omap3: fix trivial typo USB: gadget: ci13xxx: don't assume that PAGE_SIZE is 4096 USB: gadget: ci13xxx: fix complete() callback for no_interrupt rq's USB: gadget: update ci13xxx to work with g_ether USB: gadgets: ci13xxx: fix probing of compiled-in gadget drivers Revert "USB: musb: pm: don't rely fully on clock support" Revert "USB: musb: blackfin: pm: make it work" USB: uas: Use GFP_NOIO instead of GFP_KERNEL in I/O submission path USB: uas: Ensure we only bind to a UAS interface USB: uas: Rename sense pipe and sense urb to status pipe and status urb USB: uas: Use kzalloc instead of kmalloc USB: uas: Fix up the Sense IU usb: musb: core: kill unneeded #include's DA8xx: assign name to MUSB IRQ resource usb: gadget: g_ncm added ... Manually fix up trivial conflicts in USB Kconfig changes in: arch/arm/mach-omap2/Kconfig arch/sh/Kconfig drivers/usb/Kconfig drivers/usb/host/ehci-hcd.c and annoying chip clock data conflicts in: arch/arm/mach-omap2/clock3xxx_data.c arch/arm/mach-omap2/clock44xx_data.c
2010-12-22omap4: opp: add OPP table dataNishanth Menon1-0/+2
This patch adds OPP tables for OMAP4. New file has been added to keep the OMAP4 opp tables and the registration of these tables with the generic opp framework by OMAP SoC OPP interface. Based on: http://dev.omapzoom.org/?p=santosh/kernel-omap4-base.git;a=blob;f=arch/arm/mach-omap2/opp44xx_data.c;h=252e3d0cb6050a64f390b9311c1c4977d74f762a;hb=refs/heads/omap4_next Signed-off-by: Thara Gopinath <thara@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-22omap: opp: add OMAP3 OPP table data and common initNishanth Menon1-0/+2
Add OPP data for OMAP34xx and OMAP36xx and initialization functions to populate OPP tables based on current SoC. introduce an OMAP generic opp initialization routine which OMAP3 and OMAP4+ SoCs can use to register their OPP definitions. Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-21arm: mach-omap2: Kconfig: fix incorrect optionAaro Koskinen1-1/+1
There is no MFD config option, MFD_SUPPORT should be selected instead. This will prevent build errors when trying out different configurations. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-18omap: boards w/ wl12xx should select REGULATOR_FIXED_VOLTAGEOhad Ben-Cohen1-0/+3
Power to the wl12xx wlan device is controlled by a fixed regulator. Boards that have the wl12xx should select REGULATOR_FIXED_VOLTAGE so users will not be baffled. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-18Merge branch 'devel-board' into omap-for-linusTony Lindgren1-0/+6
2010-12-18arm: omap: add minimal support for RM-680Aaro Koskinen1-0/+6
Add minimal support for Nokia RM-680 board. Tested with omap2plus_defconfig. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> [tony@atomide.com: updated to remove omap_gpio_init Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-08omap: Don't select mux by default for each boardTony Lindgren1-4/+0
This should be only selected in CONFIG_ARCH_OMAP2PLUS_TYPICAL to make it easy to disable. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-01Merge branch 'ctrl-wip/mux-omap4-v4' of git://gitorious.org/omap-pm/linux ↵Tony Lindgren1-0/+10
into omap-for-linus
2010-12-01omap: AM3517/05: Add craneboard supportSrinath1-0/+5
Craneboard is a hardware development platform based on the Sitara AM3517 ARM Cortex - A8 microprocessor device. This is a low cost reference design. This patch adds basic board file. Detailed support will follow in subsequent patches. [1] http://www.ti.com/arm [2] http://www.mistralsolutions.com/products/craneboard.php Signed-off-by: Srinath <srinath@mistralsolutions.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-01arm: omap4: select USB_ARCH_HAS_EHCIAnand Gadiyar1-0/+1
The OMAP4 has an on-chip EHCI controller. Select USB_ARCH_HAS_EHCI to allow the EHCI driver to be built on OMAP4. Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2010-11-17OMAP4: pandaboard: Select CBL & CBS package and initialize muxsricharan1-0/+2
The mux framework allows the change of pad configuration by drivers when needed. Prior to this the mux framework has to be initialised with all the mux parameters specific to the board. The mux init is already present in the board file for SDP. Adding the mux init for panda boards. Signed-off-by: sricharan <r.sricharan@ti.com> Acked-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-11-17OMAP4: sdp4430: Select CBS package for ES2Benoit Cousson1-0/+1
Select the CBS package if SDP4430 is enabled during config. Use the proper package (CBL or CBS) based on chip revision. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Anand Gadiyar <gadiyar@ti.com>
2010-11-17OMAP4: mux: Add CBS package data for OMAP4430 ES2Benoit Cousson1-0/+3
Please note that the full muxmodes are re-defined for ES2 instead of using the subset. There are 81 differences among 204 pins. The subset fixup will have to iterate over the whole list for each subset entry, which can lead to an important number of iteration. On the other hand, it will take much more memory at boot time. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Anand Gadiyar <gadiyar@ti.com>
2010-11-17OMAP4: sdp4430: Select CBL package for ES1 and initialize muxBenoit Cousson1-0/+1
Select the CBL package if SDP4430 is enabled during config. Initialize the mux framework during the board init. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
2010-11-17OMAP4: mux: Add CBL package data for OMAP4430 ES1Benoit Cousson1-0/+3
Add data for OMAP4430 generated from HW pinout & register database. The data set is split in two partitions for both core and wkup. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
2010-10-08OMAP2+: Kconfig: disallow builds for boards that don't use the ↵Paul Walmsley1-3/+3
currently-selected SoC Currently, if, for example, CONFIG_ARCH_OMAP2420 is not selected, OMAP2420 board files can still be included in the build. This results in link errors: arch/arm/mach-omap2/built-in.o: In function `omap_generic_map_io': .../arch/arm/mach-omap2/board-generic.c:51: undefined reference to `omap2_set_globals_242x' arch/arm/mach-omap2/built-in.o: In function `omap_h4_init': .../arch/arm/mach-omap2/board-h4.c:330: undefined reference to `omap2420_mux_init' arch/arm/mach-omap2/built-in.o: In function `omap_h4_map_io': .../arch/arm/mach-omap2/board-h4.c:373: undefined reference to `omap2_set_globals_242x' arch/arm/mach-omap2/built-in.o: In function `omap_apollon_init': .../arch/arm/mach-omap2/board-apollon.c:325: undefined reference to `omap2420_mux_init' arch/arm/mach-omap2/built-in.o: In function `omap_apollon_map_io': .../arch/arm/mach-omap2/board-apollon.c:353: undefined reference to `omap2_set_globals_242x' make: *** [.tmp_vmlinux1] Error 1 Fix this by making the boards depend on the Kconfig option for the specific SoC that they use. Also, while here, fix the mach-omap2/board-generic.c file to remove the dependency on OMAP2420. Charulatha Varadarajan <charu@ti.com> caught a typo - thanks Charu. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Charulatha Varadarajan <charu@ti.com>
2010-10-08omap3: Add minimal OMAP3 IGEP module supportEnric Balletbo i Serra1-0/+6
The OMAP3 IGEP module is a low-power, high performance production-ready system-on-module (SOM) based on TI's OMAP3 family. More about this board at www.igep.es. Signed-off-by: Enric Balletbo i Serra <eballetbo@gmail.com> [tony@atomide.com: updated for the mmc changes and to be selected by default] Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-29OMAP: SERIAL: Enable omap-serial driver in KconfigGovindraj.R1-3/+8
Enable omap-serial driver in /mach-omap2/Kconfig and move 8250 driver selection for zoom boards. With omap-serial driver addition all omap-uarts can be handled with omap-serial driver. With addition of omap-serial driver console parameter needs be changed in bootargs from ttyS* should be replaced with ttyO* [O --> OMAP not ZERO] For example: ttyS0[UART1 on 3430SDP] changes to ttyO0. But with some boards that do not use omap-uart as console uart. we need to handle them with 8250 driver. Ex: ZOOM2/3. For zoom2/3 board we need to use 8250 serial driver and console parameter will remain ttyS0 which basically uses a Quad uart placed on the debug board connected through a gpio line. Signed-off-by: Govindraj.R <govindraj.raja@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-09-28ARM: OMAP3LOGIC: Adding LogicPD OMAP3 board supportTim Nordell1-0/+20
Adding support for LogicPD's OMAP 3530 LV SOM and OMAP 35x Torpedo board. Signed-off-by: Tim Nordell <tim.nordell@logicpd.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-28omap3: Introduce CompuLab CM-T3517 moduleIgor Grinberg1-0/+7
Add basic suppot, enable uart and led. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-21omap: Update and rename common defconfig for omap2plus devicesSantosh Shilimkar1-1/+3
This patch addresses below things - Renaming existing omap3_defconfig which has OMAP2, OMAP3 and OMAP4 builds enabled to more appropriate name 'omap2plus_defconfig' - L1 cache shift is suppose to be 5 on OMAP4 where as it is 6 on previous OMAPs. Keeping it to 5 is safer option for OMAP4 and previous OMAPs. For OMAP3 only build the shift would be still 6 - Enable needed Errata's for OMAP4 to work with DMA based device drivers CONFIG_PL310_ERRATA_588369=y CONFIG_ARM_ERRATA_720789=y - Enable the Micrel ethernet controller CONFIG_KS8851=y CONFIG_KS8851_MLL=y With above three changes, OMAP4 ethernet, mmc etc works reliably. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-08-02omap4: Add OMAP4 Panda SupportDavid Anders1-0/+5
Add initial support for the OMAP4 based Panda Board. Signed-off-by: David Anders <x0132446@ti.com> [tony@atomide.com: selected board by default in Kconfig] Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05omap2/3/4: Add Kconfig option to compile in typical omap featuresTony Lindgren1-0/+21
This produces a sane config that's suitable for using as the base for most omap2/3/4 boards. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05omap2/3/4: Select all omaps and boards by defaultTony Lindgren1-0/+28
Select all omaps and boards by default Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05omap2/3/4: Move Kconfig options to mach-omap2/KconfigTony Lindgren1-0/+18
Move omap2/3/4 specific Kconfig options to mach-omap2/Kconfig Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05omap: Make omap specific features appear under Kconfig menuTony Lindgren1-0/+7
This will make Kconfig look nicer for selecting omap processor type Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05omap: mux: Select POP package for 2430SDPTony Lindgren1-0/+1
Select POP package for 2430SDP Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05omap: mux: Select POP package for N8X0Tony Lindgren1-0/+1
Select POP package for N8X0 Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05omap: mux: Select POP package for ApollonTony Lindgren1-0/+1
Select POP package for Apollon Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05omap: mux: Select SIP package for H4Tony Lindgren1-0/+1
Select SIP package for H4 Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05omap: mux: Add data for 2420Tony Lindgren1-0/+6
Add data for 2420. Big thanks to Paul Walmsley <paul@pwsan.com> for generating usable mux data out of TRMs. Cc: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-20omap3: Add support for OMAP3Stalker boardsJason1-0/+6
Add support for OMAP3Stalker boards Signed-off-by: Jason Lam <lzg@ema-tech.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-20omap2: select ARCH_OMAP_OTG for OMAP2430 SDPViral Mehta1-0/+1
Configuration for OMAP2430 should select ARCH_OMAP_OTG just like it is done for OMAP2420 Signed-off-by: Viral Mehta <viral.mehta@lntinfotech.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-24omap: Devkit8000: Add missing package selectionThomas Weber1-2/+4
Devkit8000 uses the CUS package for OMAP3530. This patch adds missing package selection for CUS and enables CONFIG_MUX. Replace whitespace with tab in Kconfig. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-20Add minimal support for DevKit8000Thomas Weber1-0/+4
These patches add board support for the Timll DevKit8000. The DevKit8000 is a beagle board clone from Timll, sold by armkits.com. The DevKit8000 has RS232 serial port, LCD, DVI-D, S-Video, Ethernet, SD/MMC, keyboard, camera, SPI, I2C, USB and JTAG interface. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-18omap3: Fix typo on IGEP v2 boardEnric Balletbo i Serra1-1/+1
Fix typo on IGEP v2 board Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap2/3/4: Replace orred CONFIG_ARCH_OMAP2/3/4 with CONFIG_ARCH_OMAP2PLUSTony Lindgren1-1/+1
omap: Replace orred CONFIG_ARCH_OMAP2/3/4 with CONFIG_ARCH_OMAP2PLUS Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap3: Replace ARCH_OMAP34XX with ARCH_OMAP3Tony Lindgren1-21/+16
Replace ARCH_OMAP34XX with ARCH_OMAP3 Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap2: Convert ARCH_OMAP24XX to ARCH_OMAP2Tony Lindgren1-10/+6
Convert ARCH_OMAP24XX to ARCH_OMAP2 Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-01-08omap3: EVM: Choose OMAP_PACKAGE_CBBVaibhav Hiremath1-0/+1
Without this the kernel doesn't boot, it craches in omap_mux_package_fixup(), since the package_subset becomes NULL. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-15omap3: Allow EHCI to be built on OMAP3Olof Johansson1-0/+1
OMAP34XX has EHCI, so select USB_ARCH_HAS_EHCI. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Anand Gadiyar <gadiyar@ti.com> Acked-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-12omap3: cm-t35: add mux initializationMike Rapoport1-0/+1
CM-T35 can be assembled with different set of peripherals thus making certain interfaces available to user as GPIOs or dedicated pins. Because of it CM-T35 bootloader sets up mux configuration only for pins necessary to boot the system and the rest of the mux configuration is done by the kernel. Besides, having mux configuration in the kernel allows to minimize dependancy on bootloader. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-12omap3: Board file of Always Innovating OMAP3-based Touch BookGregoire Gentil1-0/+5
Board file of Always Innovating OMAP3-based Touch Book Signed-off-by: Gregoire Gentil <gregoire@gentil.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-12omap: mux: Add 36xx CBP package supportTony Lindgren1-0/+5
Add 36xx CBP package support Cc: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-12omap: mux: Add new style init functions to omap3 board-*.c filesTony Lindgren1-0/+10
Add new style mux init functions to omap3 board-*.c files So far Beagle has been confirmed to be a CBB package, and CM-T35 a CUS package. Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-12omap: mux: Add new style pin multiplexing data for 34xxTony Lindgren1-0/+9
Add new style mux data for 34xx. This should also work with 3630 easily by adding the processor subset and ball data. Note that this data is __initdata, and gets optimized out except for the GPIO pins if CONFIG_OMAP_MUX is not set. Also note that this data uses omap3630 naming for the SDMMC registers instead of 34xx naming with just MMC. Cc: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-12OMAP3: SDRC: Place SDRC AC timing and MR changes in CORE DVFS SRAM code ↵Paul Walmsley1-0/+12
behind Kconfig The code that reprograms the SDRC memory controller during CORE DVFS, mach-omap2/sram34xx.S:omap3_sram_configure_core_dpll(), does not ensure that all L3 initiators are prevented from accessing the SDRAM before modifying the SDRC AC timing and MR registers. This can cause memory to be corrupted or cause the SDRC to enter an unpredictable state. This patch places that code behind a Kconfig option, CONFIG_OMAP3_SDRC_AC_TIMING for now, and adds a note explaining what is going on. Ideally the code can be added back in once supporting code is present to ensure that other initiators aren't touching the SDRAM. At the very least, these registers should be reprogrammable during kernel init to deal with buggy bootloaders. Users who know that all other system initiators will not be touching the SDRAM can also re-enable this Kconfig option. This is a modification of a patch originally written by Rajendra Nayak <rnayak@ti.com> (the original is at http://patchwork.kernel.org/patch/51927/). Rather than removing the code completely, this patch just comments it out. Thanks to Benoît Cousson <b-cousson@ti.com> and Christophe Sucur <c-sucur@ti.com> for explaining the technical basis for this and for explaining what can be done to make this path work in future code. Thanks to Richard Woodruff <r-woodruff2@ti.com>, Nishanth Menon <nm@ti.com>, and Olof Johansson <olof@lixom.net> for their comments. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Christophe Sucur <c-sucur@ti.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com> Cc: Nishanth Menon <nm@ti.com> Cc: Olof Johansson <olof@lixom.net>
2009-12-08Merge branch 'omap-for-linus' of ↵Linus Torvalds1-0/+20
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (149 commits) arm: omap: Add omap3_defconfig AM35xx: Defconfig for AM3517 EVM board AM35xx: Add support for AM3517 EVM board omap: 3630sdp: defconfig creation omap: 3630sdp: introduce 3630 sdp board support omap3: Add defconfig for IGEP v2 board omap3: Add minimal IGEP v2 support omap3: Add CompuLab CM-T35 defconfig omap3: Add CompuLab CM-T35 board support omap3: rx51: Add wl1251 wlan driver support omap3: rx51: Add SDRAM init omap1: Add default kernel configuration for Herald omap1: Add board support and LCD for HTC Herald omap: zoom2: update defconfig for LL_DEBUG_NONE omap: zoom3: defconfig creation omap3: zoom: Introduce zoom3 board support omap3: zoom: Drop i2c-1 speed to 2400 omap3: zoom: rename zoom2 name to generic zoom omap3: zoom: split board file for software reuse omap3evm: MIgrate to smsc911x ethernet driver ... Fix trivial conflict (two unrelated config options added next to each other) in arch/arm/mach-omap2/Makefile
2009-12-02ARM: 5843/1: OMAP3: add AMBA devices for ETM and ETBAlexander Shishkin1-0/+8
This enables on-chip tracing components found in omap3xxx. Signed-off-by: Alexander Shishkin <virtuoso@slind.org> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-30 18:50:04 +0300