summaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap1
AgeCommit message (Collapse)AuthorFilesLines
2023-01-11ARM: omap1: fix building gpio15xxArnd Bergmann1-0/+1
In some randconfig builds, the asm/irq.h header is not included in gpio15xx.c, so add an explicit include to avoid a build fialure: In file included from arch/arm/mach-omap1/gpio15xx.c:15: arch/arm/mach-omap1/irqs.h:99:34: error: 'NR_IRQS_LEGACY' undeclared here (not in a function) 99 | #define IH2_BASE (NR_IRQS_LEGACY + 32) | ^~~~~~~~~~~~~~ arch/arm/mach-omap1/irqs.h:105:38: note: in expansion of macro 'IH2_BASE' 105 | #define INT_MPUIO (5 + IH2_BASE) | ^~~~~~~~ arch/arm/mach-omap1/gpio15xx.c:28:27: note: in expansion of macro 'INT_MPUIO' 28 | .start = INT_MPUIO, | ^~~~~~~~~ Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-11ARM: omap1: fix !ARCH_OMAP1_ANY link failuresArnd Bergmann5-53/+16
While compile-testing randconfig builds for the upcoming boardfile removal, I noticed that an earlier patch of mine was completely broken, and the introduction of CONFIG_ARCH_OMAP1_ANY only replaced one set of build failures with another one, now resulting in link failures like ld: drivers/video/fbdev/omap/omapfb_main.o: in function `omapfb_do_probe': drivers/video/fbdev/omap/omapfb_main.c:1703: undefined reference to `omap_set_dma_priority' ld: drivers/dma/ti/omap-dma.o: in function `omap_dma_free_chan_resources': drivers/dma/ti/omap-dma.c:777: undefined reference to `omap_free_dma' drivers/dma/ti/omap-dma.c:1685: undefined reference to `omap_get_plat_info' ld: drivers/usb/gadget/udc/omap_udc.o: in function `next_in_dma': drivers/usb/gadget/udc/omap_udc.c:820: undefined reference to `omap_get_dma_active_status' I tried reworking it, but the resulting patch ended up much bigger than simply avoiding the original problem of unused-function warnings like arch/arm/mach-omap1/mcbsp.c:76:30: error: unused variable 'omap1_mcbsp_ops' [-Werror,-Wunused-variable] As a result, revert the previous fix, and rearrange the code that produces warnings to hide them. For mcbsp, the #ifdef check can simply be removed as the cpu_is_omapxxx() checks already achieve the same result, while in the io.c the easiest solution appears to be to merge the common map bits into each soc specific portion. This gets cleaned in a nicer way after omap7xx support gets dropped, as the remaining SoCs all have the exact same I/O map. Fixes: 615dce5bf736 ("ARM: omap1: fix build with no SoC selected") Cc: stable@vger.kernel.org Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-12-15mm: Introduce set_memory_rox()Peter Zijlstra1-5/+3
Because endlessly repeating: set_memory_ro() set_memory_x() is getting tedious. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/Y1jek64pXOsougmz@hirez.programming.kicks-ass.net
2022-10-07Merge tag 'mfd-next-6.1' of ↵Linus Torvalds1-9/+0
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Core Frameworks: - Fix 'mfd_of_node_list' OF node entry resource leak New Drivers: - Add support for Ocelot VSC7512 Networking Chip - Add support for MediaTek MT6370 subPMIC - Add support for Richtek RT5120 (I2C) PMIC New Device Support: - Add support for Rockchip RV1126 and RK3588 to Syscon - Add support for Rockchip RK817 Battery Charger to RK808 - Add support for Silergy SY7636a Voltage Regulator to Simple MFD - Add support for Qualcomm PMP8074 PMIC to QCOM SPMI - Add support for Secure Update to Intel M10 BMC New Functionality: - Provide SSP type to Intel's LPSS (PCI) SPI driver Fix-ups: - Remove legacy / unused code; stmpe, intel_soc_pmic_crc, syscon - Unify / simplify; intel_soc_pmic_crc - Trivial reordering / spelling, etc; Makefile, twl-core - Convert to managed resources; intel_soc_pmic_crc - Use appropriate APIs; intel_soc_pmic_crc - strscpy() conversion; htc-i2cpld, lpc_ich, mfd-core - GPIOD conversion; htc-i2cpld, stmpe - Add missing header file includes; twl4030-irq - DT goodies; stmpe, mediatek,mt6370, x-powers,axp152, aspeed,ast2x00-scu, mediatek,mt8195-scpsys, qcom,spmi-pmic, syscon, qcom,tcsr, rockchip,rk817, sprd,ums512-glbreg, dlg,da9063 Bug Fixes: - Properly check return values; sm501, htc-i2cpld - Repair Two-Wire Bus Mode; da9062-core - Fix error handling; intel_soc_pmic_core, fsl-imx25-tsadc, lp8788, lp8788-irq" * tag 'mfd-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (60 commits) mfd: syscon: Remove repetition of the regmap_get_val_endian() mfd: ocelot-spi: Add missing MODULE_DEVICE_TABLE power: supply: Add charger driver for Rockchip RK817 dt-bindings: mfd: mt6370: Fix the indentation in the example mfd: da9061: Fix Failed to set Two-Wire Bus Mode. mfd: htc-i2cpld: Fix an IS_ERR() vs NULL bug in htcpld_core_probe() dt-bindings: mfd: qcom,tcsr: Drop simple-mfd from IPQ6018 mfd: sm501: Add check for platform_driver_register() dt-bindings: mfd: mediatek: Add scpsys compatible for mt8186 mfd: twl4030: Add missed linux/device.h header dt-bindings: mfd: dlg,da9063: Add missing regulator patterns dt-bindings: mfd: sprd: Add bindings for ums512 global registers mfd: intel_soc_pmic_chtdc_ti: Switch from __maybe_unused to pm_sleep_ptr() etc dt-bindings: mfd: syscon: Add rk3588 QoS register compatible mfd: stmpe: Switch to using gpiod API mfd: qcom-spmi-pmic: Add pm7250b compatible dt-bindings: mfd: Add missing (unevaluated|additional)Properties on child nodes mfd/omap1: htc-i2cpld: Convert to a pure GPIO driver mfd: intel-m10-bmc: Add d5005 bmc secure update driver dt-bindings: mfd: syscon: Drop ref from reg-io-width ...
2022-09-28mfd/omap1: htc-i2cpld: Convert to a pure GPIO driverLinus Walleij1-9/+0
Instead of passing GPIO numbers pertaining to ourselves through platform data, just request GPIO descriptors from our own GPIO chips and use them, and cut down on the unnecessary complexity. Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Janusz Krzysztofik <jmkrzyszt@gmail.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Cory Maccarrone <darkstar6262@gmail.com> Cc: linux-omap@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20220905115810.5987-1-linus.walleij@linaro.org
2022-08-18ARM: remove obsolete Makefile.boot infrastructureArnd Bergmann1-4/+0
There are a number of old Makefile.boot files that remain from the multiplatform conversion, and three that are still in use. These provide the "ZRELADDR", "PARAMS_PHYS" and "INITRD_PHYS" values that are platform specific. It turns out that we can generally just derive this from information that is available elsewhere: - ZRELADDR is normally detected at runtime with the CONFIG_AUTO_ZRELADDR flag, but also needed to be passed to for 'make uImage'. In a multiplatform kernel, one always has to pass this as the $(LOADADDR) variable, but in the StrongARM kernels we can derive it from the sum of $(CONFIG_PHYS_OFFSET) and $(TEXT_OFFSET) that are already known. - PARAMS_PHYS and INITRD_PHYS are only used for bootpImage, which in turn is only used for the pre-ATAGS 'param_struct' based boot interface on StrongARM based machines with old boot loaders. They can both be derived from CONFIG_PHYS_OFFSET and a machine specific offset for the initrd, so all of the logic for these can be part of arch/arm/boot/bootp/Makefile. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-08-04Merge tag 'spdx-6.0-rc1' of ↵Linus Torvalds7-53/+8
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx Pull SPDX updates from Greg KH: "Here is the set of SPDX comment updates for 6.0-rc1. Nothing huge here, just a number of updated SPDX license tags and cleanups based on the review of a number of common patterns in GPLv2 boilerplate text. Also included in here are a few other minor updates, two USB files, and one Documentation file update to get the SPDX lines correct. All of these have been in the linux-next tree for a very long time" * tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (28 commits) Documentation: samsung-s3c24xx: Add blank line after SPDX directive x86/crypto: Remove stray comment terminator treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_406.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_398.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_391.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_390.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_385.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_320.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_319.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_318.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_298.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_292.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_179.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 2) treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 1) treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_160.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_152.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_149.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_147.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_133.RULE ...
2022-07-22ARM: omap1: add Kconfig dependencies for unused boardsArnd Bergmann1-0/+10
Legacy board files with no known users are planned to get removed in early 2023, and this covers the majority of the omap1 boards as well. According to Tony, the actual users are all on OSK, Nokia770, and AMS-Delta. Additionally, the sx1 and palmte boards are supported by qemu, which is convenient for testing, so all five stay around past the initial board removal. As omap1 is now part of the multiplatform build and uses the common-clk framework, it has become easier to convert these to use devicetree based booting in the future. Cc: Janusz Krzysztofik <jmkrzyszt@gmail.com> Cc: Tony Lindgren <tony@atomide.com> Cc: linux-omap@vger.kernel.org Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-22ARM: add ATAGS dependencies to non-DT platformsArnd Bergmann1-0/+1
There are a total of eight platforms that only suppor ATAGS based boot with board files but no devicetree booting. For dove, the DT support is part of the mvebu platform, which shares driver but no code in arch/arm. Most of these will never get converted to DT, and the majority of the board files appear to be entirely unused already. There are still known users on a few machines, and there may be interest in converting some omap1, ep93xx or footbridge machines over in the future. For the moment, just add a Kconfig dependency to hide these platforms completely when CONFIG_ATAGS is disabled, and reorder the priority of the options: Rather than offering to turn ATAGS off for platforms that have DT support, make it a top-level setting that determines which platforms are visible. The s3c24xx platform supports one machine with DT support, but it cannot be built without also including ATAGS support, and the entire platform is scheduled for removal, so leaving the entire platform behind a dependency seems good enough. All defconfig files should keep working, as the option remains default enabled. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-06-10treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_320.RULEThomas Gleixner1-9/+1
Based on the normalized pattern: this program is free software you can redistribute it and/or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed as is without any warranty of any kind whether express or implied without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference. Reviewed-by: Allison Randal <allison@lohutok.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_298.RULEThomas Gleixner1-8/+1
Based on the normalized pattern: this package is free software you can redistribute it and/or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this package is provided as is and without any express or implied warranties including without limitation the implied warranties of merchantibility and fitness for a particular purpose extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference. Reviewed-by: Allison Randal <allison@lohutok.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_56.RULE ↵Thomas Gleixner2-9/+3
(part 1) Based on the normalized pattern: this file is licensed under the terms of the gnu general public license version 2 this program is licensed as is without any warranty of any kind whether express or implied extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference. Reviewed-by: Allison Randal <allison@lohutok.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_30.RULE ↵Thomas Gleixner3-27/+3
(part 1) Based on the normalized pattern: this program is free software you can redistribute it and/or modify it under the terms of the gnu general public license as published by the free software foundation version 2 this program is distributed as is without any warranty of any kind whether express or implied without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference. Reviewed-by: Allison Randal <allison@lohutok.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-03ARM: omap1: enable multiplatformArnd Bergmann5-120/+18
With all the header files out of the way, and the clock driver converted to the common framework, nothing stops us from building OMAP together with the other platforms. As usual, the decompressor support is a victim here, and is only available when CONFIG_DEBUG_LL is configured for the particular board. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-06-03ARM: OMAP1: clock: Convert to CCFJanusz Krzysztofik5-764/+563
OMAP1 still uses its own implementation of standard clock API defined in include/linux/clk.h. Internals of that implementation are not visible outside OMAP1 directory. As a consequence, device drivers are not able to register clocks potentially provided by peripheral devices. Drop OMAP1 implementation of the clock API and enable common clock framework. Modify the remaining low level code to be compatible with clock provider API and register the clocks with CCF. Move initialisation of clocks to omap1_timer_init() to avoid memory allocation issues at early setup phase from where omap1_init_early() is called. Register the clocks after initialization of clock I/O registers, local clock pointers used by OMAP1 clock ops, and local .rate fields of clocks with no local implementation of .recalc ops, so CCF structures are populated with correct data during clock registration. Instead of enabling some of the registered clocks, flag them for CCF as critical. Introduce .is_enabled op using code that verifies hardware status of clock enablement, split out from implementation of .disable_unused op, so the latter is actually called by CCF for not requested but hardware enabled clocks. Add .round_rate ops where missing so .set_rate ops are called by CCF as expected. Since CCF allows parallel execution of .enable/.disable and .set_rate ops, protect registers shared among those groups of ops from concurrent access with spinlocks. Drop local debugfs support in favor of that provided by CCF. v2: flag tc2_ck as CLK_IS_CRITICAL (Aaro) v3: rebase on top of soc/omap1-multiplatform-5.18, - drop no longer needed includes from arch/arm/mach-omap1/io.c Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-29ARM: omap1: add back omap_set_dma_priority() stubArnd Bergmann1-16/+2
One of my multiplatform patches went a little too far and removed a declaration that is needed for compile-testing the omapfb driver on non-OMAP1 platforms: arm-linux-gnueabi-ld: drivers/video/fbdev/omap/omapfb_main.o: in function `omapfb_do_probe': omapfb_main.c:(.text+0x41ec): undefined reference to `omap_set_dma_priority' Add back the inline stub, and in turn hide the definition when omapfb is disabled, like we do for the usb specific bits. Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Tony Lindgren <tony@atomide.com> Fixes: 52ef8efcb75e ("dma: omap: hide legacy interface") Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-29ARM: omap: fix missing declaration warningsArnd Bergmann3-2/+3
Moving the plat-omap files triggered a sparse warning for omap1 and omap2 that is now in a different file from before. Found some more sparse warnings here that I address by making sure the declaration is visible to both the caller and the callee, or they are static mach-omap1/fb.c:33:17: warning: symbol 'omap_fb_resources' was not declared. Should it be static? mach-omap1/timer32k.c:215:12: warning: symbol 'omap_init_clocksource_32k' was not declared. Should it be static? mach-omap1/i2c.c:36:12: warning: symbol 'omap_i2c_add_bus' was not declared. Should it be static? mach-omap1/i2c.c:115:12: warning: symbol 'omap_register_i2c_bus_cmdline' was not declared. Should it be static? mach-omap1/i2c.c:140:12: warning: symbol 'omap_register_i2c_bus' was not declared. Should it be static? mach-omap2/dma.c:180:34: warning: symbol 'dma_plat_info' was not declared. Should it be static? mach-omap2/omap4-common.c:116:6: warning: symbol 'omap_interconnect_sync' was not declared. Should it be static? mach-omap2/omap-iommu.c:113:5: warning: symbol 'omap_iommu_set_pwrdm_constraint' was not declared. Should it be static? Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Tony Lindgren <tony@atomide.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-29ARM: omap: fix address space warnings from sparseArnd Bergmann2-2/+2
Moving sram code from plat-omap got the attention of the kernel test robot. I found a few more places with related warnings because the sram references are a mix of kernel pointers and __iomem pointers: mach-omap1/sram-init.c:56:17: warning: cast removes address space '__iomem' of expression mach-omap1/board-ams-delta.c:667:9: warning: incorrect type in argument 1 (different base types) mach-omap2/sram.c:78:17: warning: cast removes address space '__iomem' of expression mach-omap2/omap4-common.c:142:27: warning: incorrect type in assignment (different address spaces) mach-omap2/omap4-common.c:142:27: expected void [noderef] __iomem *static [toplevel] sram_sync mach-omap2/omap4-common.c:142:27: got void * mach-omap2/pm34xx.c:113:45: warning: incorrect type in argument 1 (different address spaces) mach-omap2/pm34xx.c:113:45: expected void [noderef] __iomem *save_regs mach-omap2/pm34xx.c:113:45: got void *extern [addressable] [toplevel] omap3_secure_ram_storage There is no good solution here, as sram is a bit special in this regard. Change the annotations to at least shut up the warnings. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-22ARM: omap1: htc_herald: fix typos in commentsJulia Lawall1-1/+1
Various spelling mistakes in comments. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Reviewed-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-22ARM: OMAP1: fix typos in commentsJulia Lawall1-1/+1
Various spelling mistakes in comments. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Reviewed-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-22ARM: OMAP1: clock: Remove noop codeJanusz Krzysztofik3-27/+1
There are some OMAP1 clock code bits that have no effect: - crystal_type variable is set to 0 but never changed, then crystal_type == 2 condition is never true and ck_ref.rate never set to 19200000, - clk->ops->allow_idle() is called from omap_clk_enable_autoidle_all() but that op is not configured for any clock, then the function does nothing and the op field is not needed, - ENABLE_ON_INIT flag is set for some clocks but is never checked by any code, then not needed. Drop that code. Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-22ARM: OMAP1: clock: Remove unused codeJanusz Krzysztofik2-132/+2
The code of OMAP1 clocks contains quite a few unused elements: - functions and function like macros never called: clk_reparent(), recalculate_root_clocks(), clk_enable_init_clocks(), omap_clk_get_by_name(), omap_clk_disable_autoidle_all(), __clk_get_parent(clk), __clk_get_rate(), - unused structure fields: - clkops: .find_idlest(), .find_companion(), .deny_idle(), - clk: .src_offset, as well as .clkdm -- no longer present but still mentioned in comments, - definitions of unused flags: INVERT_ENABLE, CLOCK_CLKOUTX2, - definitions of unused data types: struct clk_functions, - prototypes of functions with no implementation: clk_init(), omap1_watchdog_recalc(). - declarations of never defined global variables: clkops_dummy. Drop them. Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-22ARM: OMAP1: clock: Fix UART rate reporting algorithmJanusz Krzysztofik1-1/+1
Since its introduction to the mainline kernel, omap1_uart_recalc() helper makes incorrect use of clk->enable_bit as a ready to use bitmap mask while it only provides the bit number. Fix it. Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-22ARM: OMAP1: clock: Fix early UART rate issuesJanusz Krzysztofik1-5/+5
Commit ef772f2ee31e ("ARM: OMAP: Fix CONFIG_DEBUG_LL") was supposed to fix low level debugging, most possibly by early enabling UART clocks. The fix actually introduced early reset of most bits of MOD_CONF_CTRL_0 register, with the exception of UART1 and UART2 clock related bits which were set high. However, UART1 clock bit can play different roles on different OMAP1 variants. On OMAP1610 it enables the clock as intended, but on OMAP1510 it switches the clock rate from 12 to 48 MHz. Even worth, for UART2 the bit changes its clock rate also on OMAP1610. As a result, UART rates set by a bootloader can be unintentionally changed early on kernel boot and low level debugging broken, not fixed. Besides, reset of all other bits was not justified. Don't touch register bits not related to UART clocks. Also, don't touch the bit of UART2 clock. Make sure UART1 and UART3 are enabled early on relevant OMAP1610 machine types while preserving bootloader UART clock rates on others. Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-22ARM: OMAP1: Prepare for conversion of OMAP1 clocks to CCFJanusz Krzysztofik4-10/+10
In preparation for conversion of OMAP1 clocks to common clock framework, identify arch/arm/mach-omap1 local users of those clocks and update them to call clk_prepare_enable/clk_disable_unprepare() instead of just clk_enable/disable(), as required by CCF implementation of clock API. Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-22ARM: omap1: fix build with no SoC selectedArnd Bergmann2-0/+8
In a multiplatform randconfig kernel, one can have CONFIG_ARCH_OMAP1 enabled, but none of the specific SoCs. This leads to some build issues as the code is not meant to deal with this configuration at the moment: arch/arm/mach-omap1/io.c:86:20: error: unused function 'omap1_map_common_io' [-Werror,-Wunused-function] arch/arm/mach-omap1/pm.h:113:2: error: "Power management for this processor not implemented yet" [-Werror,-W#warnings] Use the same trick as on OMAP2 and guard the actual compilation of platform code with another Makefile ifdef check based on an option that depends on having at least one SoC enabled. The io.c file still needs to get compiled to allow building device drivers with a dependency on CONFIG_ARCH_OMAP1. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-22ARM: omap1: move mach/*.h into mach directoryArnd Bergmann57-166/+127
Most of the header files are no longer referenced from outside arch/arm/mach-omap1, so move them all to that place directly and change their users to use the new location. The exceptions are: - mach/compress.h is used by the core architecture code - mach/serial.h is used by mach/compress.h The mach/memory.h is empty and gets removed in the process, avoiding the need for CONFIG_NEED_MACH_MEMORY_H. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-22ARM: omap1: use pci_remap_iospace() for omap_cfArnd Bergmann1-45/+0
The ISA I/O space handling in omap_cf is incompatible with PCI drivers in a multiplatform kernel, and requires a custom mach/io.h. Change the driver to use pci_remap_iospace() like PCI drivers do, so the generic ioport access can work across platforms. To actually use that code, we have to select CONFIG_PCI here. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-22ARM: omap1: relocate static I/O mappingArnd Bergmann1-1/+1
The address range 0xfee00000-0xfeffffff is used for PCI and PCMCIA I/O port mappings, but OMAP1 has its static mappings there as well. Move the OMAP1 addresses a little higher to avoid crashing at boot. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-22ARM: omap: un-merge plat/sram.cArnd Bergmann3-8/+89
The sram initialization code is the only shared omap1/2 code that is not a standalone driver, but it is very short. Having two copies of this code means some duplication of the sources, but actually saves object code size as it can be inlined better. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-22ARM: omap: split up arch/arm/plat-omap/KconfigArnd Bergmann1-0/+37
All the remaining features in here are either omap1 or omap2plus specific, so move them into the respective Kconfig files. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-22ARM: omap1: move plat/dma.c to mach/omap-dma.cArnd Bergmann2-1/+898
Most of the interface functions in plat/dma.c are only used from the USB driver, which is practically OMAP1 specific, except for compile testing. The omap_get_plat_info(), omap_request_dma() and omap_free_dma() functions are never called on omap2 because of runtime checks. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-21ARM: omap1: move 32k counter from plat-omap to mach-omap1Arnd Bergmann2-3/+109
omap2 stopped using this code with commit 8d39ff3d1696 ("ARM: OMAP2+: Remove unused legacy code for timer"), so just move it to mach-omap1 now, along with the other half of that driver. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-21ARM: omap1: innovator: move ohci phy power handling to board fileArnd Bergmann1-0/+19
The innovator board needs a special case for its phy control. Move the corresponding code into the board file and out of the common code by adding another callback. Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-21ARM: omap1: move CF chipselect setup to board fileArnd Bergmann1-5/+33
There is only one board that uses the omap_cf driver, so moving the chipselect configuration there does not lead to code duplication but avoids the use of mach/tc.h in drivers. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-21ARM: omap1: move perseus spi pinconf to board fileArnd Bergmann1-0/+6
The driver has always had a FIXME about this, and it seems like this trivial code move avoids a mach header inclusion, so just do it. With that out of the way, and the header file inclusions changed to global files, the driver can also be compile-tested on other platforms. Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-21ARM: omap1: move some headers to include/linux/socArnd Bergmann6-646/+10
There are three remaining header files that are used by omap1 specific device drivers: - mach/soc.h provides cpu_is_omapXXX abstractions - mach/hardware.h provides omap_read/omap_write functions and physical addresses - mach/mux.h provides an omap specific pinctrl abstraction This is generally not how we do platform abstractions today, and it would be good to completely get rid of these in favor of passing information through platform devices and the pinctrl subsystem. However, given that nobody is working on that, just move it one step forward by splitting out the header files that are used by drivers today from the machine headers that are only used internally. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-21ARM: omap1: move mach/usb.h to include/linux/socArnd Bergmann16-142/+39
The register definitions in this header are used in at least four different places, with little hope of completely cleaning that up. Split up the file into a portion that becomes a linux-wide header under include/linux/soc/ti/, and the parts that are actually only needed by board files. Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-21ARM: omap1: ams-delta: remove camera leftoversArnd Bergmann1-11/+0
The obsolete camera support was removed, but a few lines remain in this file and cause a warning: arch/arm/mach-omap1/board-ams-delta.c:462:12: warning: 'ams_delta_camera_power' defined but not used [-Wunused-function] 462 | static int ams_delta_camera_power(struct device *dev, int power) Remove this and all related lines as well. Fixes: ce548396a433 ("media: mach-omap1: board-ams-delta.c: remove soc_camera dependencies") Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-21fbdev: omap: pass irqs as resourceArnd Bergmann1-1/+18
To avoid relying on the mach/irqs.h header, stop using OMAP_LCDC_IRQ and INT_1610_SoSSI_MATCH directly in the driver code, but instead pass these as resources. Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-21ARM: omap1: move lcd_dma code into omapfb driverArnd Bergmann4-554/+0
The omapfb driver is split into platform specific code for omap1, and driver code that is also specific to omap1. Moving both parts into the driver directory simplifies the structure and avoids the dependency on certain omap machine header files. As mach/lcd_dma.h can not be included from include/linux/omap-dma.h any more now, move the omap_lcd_dma_running() declaration into the omap-dma header, which matches where it is defined. Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-21ARM: omap1: innovator: pass lcd control address as pdataArnd Bergmann1-0/+3
To avoid using the mach/omap1510.h header file, pass the correct address as platform data. Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-11-01Merge tag 'irq-core-2021-10-31' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "Updates for the interrupt subsystem: Core changes: - Prevent a potential deadlock when initial priority is assigned to a newly created interrupt thread. A recent change to plug a race between cpuset and __sched_setscheduler() introduced a new lock dependency which is now triggered. Break the lock dependency chain by moving the priority assignment to the thread function. - A couple of small updates to make the irq core RT safe. - Confine the irq_cpu_online/offline() API to the only left unfixable user Cavium Octeon so that it does not grow new usage. - A small documentation update Driver changes: - A large cross architecture rework to move irq_enter/exit() into the architecture code to make addressing the NOHZ_FULL/RCU issues simpler. - The obligatory new irq chip driver for Microchip EIC - Modularize a few irq chip drivers - Expand usage of devm_*() helpers throughout the driver code - The usual small fixes and improvements all over the place" * tag 'irq-core-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits) h8300: Fix linux/irqchip.h include mess dt-bindings: irqchip: renesas-irqc: Document r8a774e1 bindings MIPS: irq: Avoid an unused-variable error genirq: Hide irq_cpu_{on,off}line() behind a deprecated option irqchip/mips-gic: Get rid of the reliance on irq_cpu_online() MIPS: loongson64: Drop call to irq_cpu_offline() irq: remove handle_domain_{irq,nmi}() irq: remove CONFIG_HANDLE_DOMAIN_IRQ_IRQENTRY irq: riscv: perform irqentry in entry code irq: openrisc: perform irqentry in entry code irq: csky: perform irqentry in entry code irq: arm64: perform irqentry in entry code irq: arm: perform irqentry in entry code irq: add a (temporary) CONFIG_HANDLE_DOMAIN_IRQ_IRQENTRY irq: nds32: avoid CONFIG_HANDLE_DOMAIN_IRQ irq: arc: avoid CONFIG_HANDLE_DOMAIN_IRQ irq: add generic_handle_arch_irq() irq: unexport handle_irq_desc() irq: simplify handle_domain_{irq,nmi}() irq: mips: simplify do_domain_IRQ() ...
2021-10-26irq: remove handle_domain_{irq,nmi}()Mark Rutland1-1/+1
Now that entry code handles IRQ entry (including setting the IRQ regs) before calling irqchip code, irqchip code can safely call generic_handle_domain_irq(), and there's no functional reason for it to call handle_domain_irq(). Let's cement this split of responsibility and remove handle_domain_irq() entirely, updating irqchip drivers to call generic_handle_domain_irq(). For consistency, handle_domain_nmi() is similarly removed and replaced with a generic_handle_domain_nmi() function which also does not perform any entry logic. Previously handle_domain_{irq,nmi}() had a WARN_ON() which would fire when they were called in an inappropriate context. So that we can identify similar issues going forward, similar WARN_ON_ONCE() logic is added to the generic_handle_*() functions, and comments are updated for clarity and consistency. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2021-10-05ARM: omap1: move omap15xx local bus handling to usb.cArnd Bergmann2-46/+82
Commit 38225f2ef2f4 ("ARM/omap1: switch to use dma_direct_set_offset for lbus DMA offsets") removed a lot of mach/memory.h, but left the USB offset handling split into arch/arm/mach-omap1/usb.c and drivers/usb/host/ohci-omap.c. This can cause a randconfig build warning that now fails the build with -Werror: arch/arm/mach-omap1/usb.c:561:30: error: 'omap_1510_usb_ohci_nb' defined but not used [-Werror=unused-variable] 561 | static struct notifier_block omap_1510_usb_ohci_nb = { | ^~~~~~~~~~~~~~~~~~~~~ Move it all into the platform file to get rid of the final location that relies on mach/memory.h. Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20210927144118.2464881-1-arnd@kernel.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-06-24Merge tag 'omap-for-v5.14/fixes-not-urgent-signed' of ↵Olof Johansson3-18/+10
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/soc Non-urgent fixes for omaps for v5.14 merge window Warn and block suspend for am335x unless the PM related modules and firmware are loaded and warn otherwise. Otherwise we easily end up with a suspended system with nothing capable of waking it up. We also drop a duplicated prototype for am33xx_init_early(). * tag 'omap-for-v5.14/fixes-not-urgent-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Block suspend for am3 and am4 if PM is not configured ARM: OMAP2+: remove duplicated prototype ARM: dts: dra7: Fix duplicate USB4 target module node ARM: OMAP1: ams-delta: remove unused function ams_delta_camera_power bus: ti-sysc: Fix flakey idling of uarts and stop using swsup_sidle_act bus: ti-sysc: Fix am335x resume hang for usb otg module ARM: OMAP2+: Fix build warning when mmc_omap is not built ARM: OMAP1: isp1301-omap: Add missing gpiod_add_lookup_table function ARM: OMAP1: Fix use of possibly uninitialized irq variable bus: ti-sysc: Fix missing quirk flags for sata Link: https://lore.kernel.org/r/pull-1624002812-396117@atomide.com Signed-off-by: Olof Johansson <olof@lixom.net>
2021-05-26ARM: OMAP1: ams-delta: remove unused function ams_delta_camera_powerMaciej Falkowski1-14/+0
The ams_delta_camera_power() function is unused as reports Clang compilation with omap1_defconfig on linux-next: arch/arm/mach-omap1/board-ams-delta.c:462:12: warning: unused function 'ams_delta_camera_power' [-Wunused-function] static int ams_delta_camera_power(struct device *dev, int power) ^ 1 warning generated. The soc_camera support was dropped without removing ams_delta_camera_power() function, making it unused. Fixes: ce548396a433 ("media: mach-omap1: board-ams-delta.c: remove soc_camera dependencies") Signed-off-by: Maciej Falkowski <maciej.falkowski9@gmail.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://github.com/ClangBuiltLinux/linux/issues/1326
2021-05-21ARM: OMAP1: Remove leading spaces in KconfigJuerg Haefliger1-6/+6
Remove leading spaces before tabs in Kconfig file(s) by running the following command: $ find arch/arm/mach-omap1 -name 'Kconfig*' | \ xargs sed -r -i 's/^[ ]+\t/\t/' Signed-off-by: Juerg Haefliger <juergh@canonical.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-05-18ARM: OMAP1: isp1301-omap: Add missing gpiod_add_lookup_table functionMaciej Falkowski1-1/+3
The gpiod table was added without any usage making it unused as reported by Clang compilation from omap1_defconfig on linux-next: arch/arm/mach-omap1/board-h2.c:347:34: warning: unused variable 'isp1301_gpiod_table' [-Wunused-variable] static struct gpiod_lookup_table isp1301_gpiod_table = { ^ 1 warning generated. The patch adds the missing gpiod_add_lookup_table() function. Signed-off-by: Maciej Falkowski <maciej.falkowski9@gmail.com> Fixes: f3ef38160e3d ("usb: isp1301-omap: Convert to use GPIO descriptors") Link: https://github.com/ClangBuiltLinux/linux/issues/1325 Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-05-18ARM: OMAP1: Fix use of possibly uninitialized irq variableMaciej Falkowski1-3/+7
The current control flow of IRQ number assignment to `irq` variable allows a request of IRQ of unspecified value, generating a warning under Clang compilation with omap1_defconfig on linux-next: arch/arm/mach-omap1/pm.c:656:11: warning: variable 'irq' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized] else if (cpu_is_omap16xx()) ^~~~~~~~~~~~~~~~~ ./arch/arm/mach-omap1/include/mach/soc.h:123:30: note: expanded from macro 'cpu_is_omap16xx' ^~~~~~~~~~~~~ arch/arm/mach-omap1/pm.c:658:18: note: uninitialized use occurs here if (request_irq(irq, omap_wakeup_interrupt, 0, "peripheral wakeup", ^~~ arch/arm/mach-omap1/pm.c:656:7: note: remove the 'if' if its condition is always true else if (cpu_is_omap16xx()) ^~~~~~~~~~~~~~~~~~~~~~ arch/arm/mach-omap1/pm.c:611:9: note: initialize the variable 'irq' to silence this warning int irq; ^ = 0 1 warning generated. The patch provides a default value to the `irq` variable along with a validity check. Signed-off-by: Maciej Falkowski <maciej.falkowski9@gmail.com> Link: https://github.com/ClangBuiltLinux/linux/issues/1324 Signed-off-by: Tony Lindgren <tony@atomide.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-26 09:36:09 +0300