summaryrefslogtreecommitdiff
path: root/arch/arm/mach-ixp4xx/common.c
AgeCommit message (Collapse)AuthorFilesLines
2019-05-16ARM: ixp4xx: Remove duplicated include from common.cYueHaibing1-1/+0
Remove duplicated include. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-23soc: ixp4xx: qmgr: Pass resourcesLinus Walleij1-5/+20
Instead of using hardcoded base address implicitly obtained through <linux/io.h>, pass the physical base for the QMGR block as a memory resource and remap it in the driver. Also pass the two IRQs as resources and obtain them in the driver. Use devm_* accessors and simplify the error path in the process. Drop memory region request as this is done by the devm_ioremap* functions. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-04-23soc: ixp4xx: npe: Pass addresses as resourcesLinus Walleij1-0/+21
Instead of using hardcoded base addresses implicitly obtained through <linux/io.h>, pass the physical base for the three NPE blocks as memory resources and remap these in the driver. Drop the memory request region business, this will anyways be done by devm_* remapping functions. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-04-23ARM: ixp4xx: Turn the QMGR into a platform deviceLinus Walleij1-0/+6
Instead of registering everything related to the QMGR unconditionally in the module_init() call (which will never work with multiplatform) create a platform device and probe the QMGR like any other device. Put the device second in the list of devices added for the platform so it is there when the dependent network and crypto drivers probe later on. This probe() path will not be taken unconditionally on device tree boots, so remove the DT guard. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-04-23ARM: ixp4xx: Turn the NPE into a platform deviceLinus Walleij1-0/+6
Instead of registering everything related to the NPE unconditionally in the module_init() call (which will never work with multiplatform) create a platform device and probe the NPE like any other device. Put the device first in the list of devices added for the platform so it is there when the dependent network and crypto drivers probe later on. This probe() path will not be taken unconditionally on device tree boots, so remove the DT guard. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-04-23ARM: ixp4xx: Switch to use new timer driverLinus Walleij1-149/+4
This augments the IXP4xx to select and use the new timer driver in drivers/clocksource and removes the old code in the machine. Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-04-23ARM: ixp4xx: Switch to use new IRQ+GPIO driversLinus Walleij1-296/+22
This deletes the old irq+gpiochip combo from the IXP4xx machine and switches it over to use the new drivers merged in respective subsystem. Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-04-19ARM: ixp4xx: Convert to SPARSE_IRQLinus Walleij1-0/+2
This localizes the <mach/irqs.h> header to the mach-ixp4xx directory, removes NR_IRQS and switches IXP4xx over to using SPARSE_IRQ. This is a prerequisite for DT support. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-04-19ARM: ixp4xx: Convert to MULTI_IRQ_HANDLERLinus Walleij1-29/+80
This rewrites the IXP4xx to use MULTI_IRQ_HANDLER and create an irqdomain for the irqchip in the platform. We convert the timer to request the interrupt like any other driver in the process. We bump all IRQs to 16+offset to avoid using IRQ 0 and set NR_IRQS to 512 (the default for most systems). This conveniently fits with the first 16 IRQs being pre-allocated when using SPARSE_IRQ. This is a prerequisite for SPARSE_IRQ and DT boot. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-12-25clocksource: Use a plain u64 instead of cycle_tThomas Gleixner1-1/+1
There is no point in having an extra type for extra confusion. u64 is unambiguous. Conversion was done with the following coccinelle script: @rem@ @@ -typedef u64 cycle_t; @fix@ typedef cycle_t; @@ -cycle_t +u64 Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: John Stultz <john.stultz@linaro.org>
2016-12-24Replace <asm/uaccess.h> with <linux/uaccess.h> globallyLinus Torvalds1-1/+1
This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-02-19ARM: ixp4xx: switch to gpiochip_add_data()Linus Walleij1-2/+2
We're planning to remove the gpiochip_add() function to swith to gpiochip_add_data() with NULL for data argument. Cc: arm@kernel.org Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-28ARM: kill off set_irq_flags usageRob Herring1-1/+1
set_irq_flags is ARM specific with custom flags which have genirq equivalents. Convert drivers to use the genirq interfaces directly, so we can kill off set_irq_flags. The translation of flags is as follows: IRQF_VALID -> !IRQ_NOREQUEST IRQF_PROBE -> !IRQ_NOPROBE IRQF_NOAUTOEN -> IRQ_NOAUTOEN For IRQs managed by an irqdomain, the irqdomain core code handles clearing and setting IRQ_NOREQUEST already, so there is no need to do this in .map() functions and we can simply remove the set_irq_flags calls. Some users also modify IRQ_NOPROBE and this has been maintained although it is not clear that is really needed. There appears to be a great deal of blind copy and paste of this code. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Hans Ulli Kroll <ulli.kroll@googlemail.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Imre Kaloz <kaloz@openwrt.org> Acked-by: Krzysztof Halasa <khalasa@piap.pl> Cc: Greg Ungerer <gerg@uclinux.org> Cc: Roland Stigge <stigge@antcom.de> Cc: Tony Lindgren <tony@atomide.com> Cc: Daniel Mack <daniel@zonque.org> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Simtec Linux Team <linux@simtec.co.uk> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Wan ZongShun <mcuos.com@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-07-17ARM/ixp4xx/timer: Migrate to new 'set-state' interfaceViresh Kumar1-28/+40
Migrate ixp4xx driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. NOTE: ixp4xx_set_{oneshot|periodic} don't perform read operation on 'IXP4XX_OSRT1' register anymore. Cc: Imre Kaloz <kaloz@openwrt.org> Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2014-11-10ARM: ixp4xx: Fix build with IXP4XX_INDIRECT_PCIArnd Bergmann1-1/+1
Provide *_relaxed() accessors and make sure to pass the volatile void __iomem * to accessors rather than the value cast to a u32. This allows ixp4xx to build with IXP4XX_INDIRECT_PCI enabled. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-04-06Merge tag 'cleanup-3.15' of ↵Linus Torvalds1-2/+12
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Arnd Bergmann: "These cleanup patches are mainly move stuff around and should all be harmless. They are mainly split out so that other branches can be based on top to avoid conflicts. Notable changes are: - We finally remove all mach/timex.h, after CLOCK_TICK_RATE is no longer used (Uwe Kleine-König) - The Qualcomm MSM platform is split out into legacy mach-msm and new-style mach-qcom, to allow easier maintainance of the new hardware support without regressions (Kumar Gala) - A rework of some of the Kconfig logic to simplify multiplatform support (Rob Herring) - Samsung Exynos gets closer to supporting multiplatform (Sachin Kamat and others) - mach-bcm3528 gets merged into mach-bcm (Stephen Warren) - at91 gains some common clock framework support (Alexandre Belloni, Jean-Jacques Hiblot and other French people)" * tag 'cleanup-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (89 commits) ARM: hisi: select HAVE_ARM_SCU only for SMP ARM: efm32: allow uncompress debug output ARM: prima2: build reset code standalone ARM: at91: add PWM clock ARM: at91: move sam9261 SoC to common clk ARM: at91: prepare common clk transition for sam9261 SoC ARM: at91: updated the at91_dt_defconfig with support for the ADS7846 ARM: at91: dt: sam9261: Device Tree support for the at91sam9261ek ARM: at91: dt: defconfig: Added the sam9261 to the list of DT-enabled SOCs ARM: at91: dt: Add at91sam9261 dt SoC support ARM: at91: switch sam9rl to common clock framework ARM: at91/dt: define main clk frequency of at91sam9rlek ARM: at91/dt: define at91sam9rl clocks ARM: at91: prepare common clk transition for sam9rl SoCs ARM: at91: prepare sam9 dt boards transition to common clk ARM: at91: dt: sam9rl: Device Tree for the at91sam9rlek ARM: at91/defconfig: Add the sam9rl to the list of DT-enabled SOCs ARM: at91: Add at91sam9rl DT SoC support ARM: at91: prepare at91sam9rl DT transition ARM: at91/defconfig: refresh at91sam9260_9g20_defconfig ...
2014-04-06Merge tag 'fixes-non-critical-3.15' of ↵Linus Torvalds1-5/+56
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC non-critical bug fixes from Arnd Bergmann: "Lots of isolated bug fixes that were not found to be important enough to be submitted before the merge window or backported into stable kernels. The vast majority of these came out of Arnd's randconfig testing and just prevents running into build-time bugs in configurations that we do not care about in practice" * tag 'fixes-non-critical-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (75 commits) ARM: at91: fix a typo ARM: moxart: fix CPU selection ARM: tegra: fix board DT pinmux setup ARM: nspire: Fix compiler warning IXP4xx: Fix DMA masks. Revert "ARM: ixp4xx: Make dma_set_coherent_mask common, correct implementation" IXP4xx: Fix Goramo Multilink GPIO conversion. Revert "ARM: ixp4xx: fix gpio rework" ARM: tegra: make debug_ll code build for ARMv6 ARM: sunxi: fix build for THUMB2_KERNEL ARM: exynos: add missing include of linux/module.h ARM: exynos: fix l2x0 saved regs handling ARM: samsung: select CRC32 for SAMSUNG_PM_CHECK ARM: samsung: select ATAGS where necessary ARM: samsung: fix SAMSUNG_PM_DEBUG Kconfig logic ARM: samsung: allow serial driver to be disabled ARM: s5pv210: enable IDE support in MACH_TORBRECK ARM: s5p64x0: fix building with only one soc type ARM: s3c64xx: select power domains only when used ARM: s3c64xx: MACH_SMDK6400 needs HSMMC1 ...
2014-03-27IXP4xx: Fix DMA masks.Krzysztof Halasa1-5/+56
Now, devices will have 32-bit default DMA masks (0xFFFFFFFF) as per DMA API. Fixes: $ ifconfig eth0 up net eth0: coherent DMA mask is unset $ ifconfig hdlc0 up net hdlc0: coherent DMA mask is unset Also fixes a cosmetic off-by-one bug which caused DMA transfers ending exactly on the 64 MiB boundary to go through dmabounce unnecessarily. Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl> Tested-by: Simon Kagstrom <simon.kagstrom@netinsight.net> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-03-27Revert "ARM: ixp4xx: Make dma_set_coherent_mask common, correct implementation"Arnd Bergmann1-12/+0
This reverts commit bfdad565ae0a61ac943974b8ae61ec0ed55ceb04. The patch turned out to be incorrect, and will be replaced with a correct patch. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-03-27Revert "ARM: ixp4xx: fix gpio rework"Arnd Bergmann1-3/+3
This reverts commit 48ba81f6fdb7580a5c474da1b14a338e1358e6ab. A better fix was sent by Krzysztof Halasa. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-03-22Merge branch 'randconfig-fixes' into next/fixes-non-criticalArnd Bergmann1-3/+3
This is the first batch of a much longer series of bug fixes found during randconfig testing. This part are all the simple patches that are applicable for the arm-soc tree, while most other fixes will likely go through other maintainers. * randconfig-fixes: (50 commits) ARM: tegra: make debug_ll code build for ARMv6 ARM: sunxi: fix build for THUMB2_KERNEL ARM: exynos: add missing include of linux/module.h ARM: exynos: fix l2x0 saved regs handling ARM: samsung: select CRC32 for SAMSUNG_PM_CHECK ARM: samsung: select ATAGS where necessary ARM: samsung: fix SAMSUNG_PM_DEBUG Kconfig logic ARM: samsung: allow serial driver to be disabled ARM: s5pv210: enable IDE support in MACH_TORBRECK ARM: s5p64x0: fix building with only one soc type ARM: s3c64xx: select power domains only when used ARM: s3c64xx: MACH_SMDK6400 needs HSMMC1 ARM: s3c24xx: osiris dvs needs tps65010 ARM: s3c24xx: fix gta02 build error ARM: s3c24xx: MINI2440 needs I2C for EEPROM_AT24 ARM: integrator: only select pl01x if TTY is enabled ARM: realview: fix sparsemem build ARM: footbridge: make screen_info setup conditional ARM: footbridge: fix build with PCI disabled ARM: footbridge: don't build floppy code for addin mode ... Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-03-21ARM: ixp4xx: fix gpio reworkArnd Bergmann1-3/+3
Commit 098e30f6558f8 "ARM: ixp4xx: stop broadcasting the custom GPIO API" changed the internal gpio code of ixp4xx to be accessible only from common.c, but unfortunately that broke the Goramo MultiLink code, which uses this API. This tries to restore the previous state without exposing the API globally again. A better solution might be needed. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Krzysztof Halasa <khc@pm.waw.pl> Cc: Imre Kaloz <kaloz@openwrt.org>
2014-03-18ARM: ixp4xx: Make dma_set_coherent_mask common, correct implementationSimon Kågström1-0/+12
Non-PCI devices can use the entire 32-bit range, PCI dittos are limited to the first 64MiB. Also actually setup coherent_dma_mask. The patch has been verified on a board with 128MiB memory, one ipx4xx_eth device and a e100 PCI device. Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-03-12ARM: 7998/1: IXP4xx: remove deprecated IRQF_DISABLEDMichael Opdenacker1-1/+1
This patch removes the use of the IRQF_DISABLED flag from code in arch/arm/mach-ixp4xx It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-02-19Merge tag 'dropmachtimexh-v2' of git://git.pengutronix.de/git/ukl/linux into ↵Olof Johansson1-2/+12
next/cleanup This cleanup series gets rid of <mach/timex.h> for platforms not using ARCH_MULTIPLATFORM. (For multi-platform code it's already unused since 387798b (ARM: initial multiplatform support).) To make this work some code out of arch/arm needed to be adapted. The respective changes got acks by their maintainers to be taken via armsoc (with Andrew Morton substituting for Alessandro Zummo as rtc maintainer). Compared to the previous pull request there was another patch added that fixes a (non-critical) regression on ixp4xx. Olof Johansson asked to not squash this fix into the original commit to save him from the need to reverify the series. * tag 'dropmachtimexh-v2' of git://git.pengutronix.de/git/ukl/linux: ARM: ixp4xx: fix timer latch calculation ARM: drop <mach/timex.h> for !ARCH_MULTIPLATFORM, too ARM: rpc: stop using <mach/timex.h> ARM: ixp4xx: stop using <mach/timex.h> input: ixp4xx-beeper: don't use symbols from <mach/timex.h> ARM: at91: don't use <mach/timex.h> ARM: ep93xx: stop using mach/timex.h ARM: mmp: stop using mach/timex.h ARM: netx: stop using mach/timex.h ARM: sa1100: stop using mach/timex.h clocksource: sirf/marco+prima2: drop usage of CLOCK_TICK_RATE rtc: pxa: drop unused #define TIMER_FREQ rtc: at91sam9: include <mach/hardware.h> explicitly ARM/serial: at91: switch atmel serial to use gpiolib Signed-off-by: Olof Johansson <olof@lixom.net>
2014-02-19ARM: ixp4xx: fix timer latch calculationUwe Kleine-König1-1/+9
In commit f0402f9b4711 ("ARM: ixp4xx: stop using <mach/timex.h>") I didn't intend to implement a functional change, but as Olof noticed I failed---at least a bit. Before this commit the following was used to determine the latch value used: #define IXP4XX_TIMER_FREQ 66666000 #define CLOCK_TICK_RATE \ (((IXP4XX_TIMER_FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ) #define LATCH ((CLOCK_TICK_RATE + HZ/2) / HZ) The complicated calculation was done "b/c the timer register ignores the bottom 2 bits of the LATCH value." With HZ=100 CLOCK_TICK_RATE used to calculate to 66666100 and so LATCH to 666661. In ixp4xx_set_mode the term LATCH & ~IXP4XX_OST_RELOAD_MASK was used to write to the relevant register (with IXP4XX_OST_RELOAD_MASK being 3) and so effectively 666660 was used. In commit f0402f9b4711 I translated that to: #define IXP4XX_TIMER_FREQ 66666000 #define IXP4XX_LATCH DIV_ROUND_CLOSEST(IXP4XX_TIMER_FREQ, HZ) which results in the same register writes, but still doesn't bear in mind that the two least significant bits cannot be specified (which is relevant only when HZ or IXP4XX_TIMER_FREQ are changed). Instead of reverting back to the old approach use a more obvious and also more correct way to calculate LATCH. (Regarding the more correct claim: With IXP4XX_TIMER_FREQ == 66665999, the old code resulted in LATCH = 666657 corresponding to a cycle time of 0.009999940149400597 seconds (error: -6.0e-8 s) while the new approach results in LATCH = 666660 and so a cycle time of 0.010000000150001503 seconds (error: 1.5e-10 s).) Fixes: f0402f9b4711 ("ARM: ixp4xx: stop using <mach/timex.h>") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2014-01-24Merge tag 'soc-for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform changes from Olof Johansson: "New core SoC-specific changes. New platforms: * Introduction of a vendor, Hisilicon, and one of their SoCs with some random numerical product name. * Introduction of EFM32, embedded platform from Silicon Labs (ARMv7m, i.e. !MMU). * Marvell Berlin series of SoCs, which include the one in Chromecast. * MOXA platform support, ARM9-based platform used mostly in industrial products * Support for Freescale's i.MX50 SoC. Other work: * Renesas work for new platforms and drivers, and conversion over to more multiplatform-friendly device registration schemes. * SMP support for Allwinner sunxi platforms. * ... plus a bunch of other stuff across various platforms" * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (201 commits) ARM: tegra: fix tegra_powergate_sequence_power_up() inline ARM: msm_defconfig: Update for multi-platform ARM: msm: Move MSM's DT based hardware to multi-platform support ARM: msm: Only build timer.c if required ARM: msm: Only build clock.c on proc_comm based platforms ARM: ux500: Enable system suspend with WFI support ARM: ux500: turn on PRINTK_TIME in u8500_defconfig ARM: shmobile: r8a7790: Fix I2C controller names ARM: msm: Simplify ARCH_MSM_DT config ARM: msm: Add support for MSM8974 SoC ARM: sunxi: select ARM_PSCI MAINTAINERS: Update Allwinner sunXi maintainer files ARM: sunxi: Select RESET_CONTROLLER ARM: imx: improve the comment of CCM lpm SW workaround ARM: imx: improve status check of clock gate ARM: imx: add necessary interface for pfd ARM: imx_v6_v7_defconfig: Select CONFIG_REGULATOR_PFUZE100 ARM: imx_v6_v7_defconfig: Select MX35 and MX50 device tree support ARM: imx: Add cpu frequency scaling support ARM i.MX35: Add devicetree support. ...
2014-01-02IXP4xx: remove '1 &&' from a condition check in ixp4xx_restart()Krzysztof Hałasa1-1/+1
Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-12-20ARM: ixp4xx: stop using <mach/timex.h>Uwe Kleine-König1-2/+4
The only user of symbols defined in ixp4xx's <mach/timex.h> is common.c. Fix that one up by moving the used #define into common.c directly and add a local substitute for the global define LATCH which uses CLOCK_TICK_RATE. This makes ixp4xx not to be a bar to dropping support for <mach/timex.h>. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2013-12-06Merge branch 'soc/sched_clock' into next/socKevin Hilman1-2/+2
From Stephen Boyd: * soc/sched_clock: ARM: versatile: Switch to sched_clock_register() ARM: orion: Switch to sched_clock_register() ARM: OMAP: Switch to sched_clock_register() ARM: iop: Switch to sched_clock_register() ARM: u300: Switch to sched_clock_register() ARM: sa1100: Switch to sched_clock_register() ARM: pxa: Switch to sched_clock_register() ARM: OMAP2+: Switch to sched_clock_register() ARM: OMAP1: Switch to sched_clock_register() ARM: msm: Switch to sched_clock_register() ARM: mmp: Switch to sched_clock_register() ARM: IXP4xx: Switch to sched_clock_register() ARM: integrator: Switch to sched_clock_register() ARM: imx: Switch to sched_clock_register() ARM: davinci: Switch to sched_clock_register() ARM: clps711x: Switch to sched_clock_register() ARM: timer-sp: Switch to sched_clock_register() Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-11-22ARM: IXP4xx: Switch to sched_clock_register()Stephen Boyd1-2/+2
The 32 bit sched_clock interface now supports 64 bits. Upgrade to the 64 bit function to allow us to remove the 32 bit registration interface. Cc: Imre Kaloz <kaloz@openwrt.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-09-27ARM: ixp4xx: stop broadcasting the custom GPIO APILinus Walleij1-0/+38
Now that these custom GPIO accessors are only used from the gpio chip in this machine, move the code out of the include file and right next to the gpiochip implementation. Cc: Imre Kaloz <kaloz@openwrt.org> Cc: Alexandre Courbot <acourbot@nvidia.com> Acked-by: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-27ARM: ixp4: delete irq_to_gpioLinus Walleij1-11/+0
This dangerous function is not used in the kernel, so let's just delete it. Cc: Imre Kaloz <kaloz@openwrt.org> Cc: Alexandre Courbot <acourbot@nvidia.com> Acked-by: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-07-09reboot: arm: change reboot_mode to use enum reboot_modeRobin Holt1-2/+2
Preparing to move the parsing of reboot= to generic kernel code forces the change in reboot_mode handling to use the enum. [akpm@linux-foundation.org: fix arch/arm/mach-socfpga/socfpga.c] Signed-off-by: Robin Holt <holt@sgi.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Russ Anderson <rja@sgi.com> Cc: Robin Holt <holt@sgi.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-07Merge branch 'timers-core-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer core updates from Thomas Gleixner: "The timer changes contain: - posix timer code consolidation and fixes for odd corner cases - sched_clock implementation moved from ARM to core code to avoid duplication by other architectures - alarm timer updates - clocksource and clockevents unregistration facilities - clocksource/events support for new hardware - precise nanoseconds RTC readout (Xen feature) - generic support for Xen suspend/resume oddities - the usual lot of fixes and cleanups all over the place The parts which touch other areas (ARM/XEN) have been coordinated with the relevant maintainers. Though this results in an handful of trivial to solve merge conflicts, which we preferred over nasty cross tree merge dependencies. The patches which have been committed in the last few days are bug fixes plus the posix timer lot. The latter was in akpms queue and next for quite some time; they just got forgotten and Frederic collected them last minute." * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (59 commits) hrtimer: Remove unused variable hrtimers: Move SMP function call to thread context clocksource: Reselect clocksource when watchdog validated high-res capability posix-cpu-timers: don't account cpu timer after stopped thread runtime accounting posix_timers: fix racy timer delta caching on task exit posix-timers: correctly get dying task time sample in posix_cpu_timer_schedule() selftests: add basic posix timers selftests posix_cpu_timers: consolidate expired timers check posix_cpu_timers: consolidate timer list cleanups posix_cpu_timer: consolidate expiry time type tick: Sanitize broadcast control logic tick: Prevent uncontrolled switch to oneshot mode tick: Make oneshot broadcast robust vs. CPU offlining x86: xen: Sync the CMOS RTC as well as the Xen wallclock x86: xen: Sync the wallclock when the system time is set timekeeping: Indicate that clock was set in the pvclock gtod notifier timekeeping: Pass flags instead of multiple bools to timekeeping_update() xen: Remove clock_was_set() call in the resume path hrtimers: Support resuming with two or more CPUs online (but stopped) timer: Fix jiffies wrap behavior of round_jiffies_common() ...
2013-06-13sched_clock: Make ARM's sched_clock generic for all architecturesStephen Boyd1-1/+1
Nothing about the sched_clock implementation in the ARM port is specific to the architecture. Generalize the code so that other architectures can use it by selecting GENERIC_SCHED_CLOCK. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> [jstultz: Merge minor collisions with other patches in my tree] Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-05-23ARM: 7728/1: mm: Use phys_addr_t properly for ioremap functionsLaura Abbott1-1/+1
Several of the ioremap functions use unsigned long in places resulting in truncation if physical addresses greater than 4G are passed in. Change the types of the functions and the callers accordingly. Cc: Krzysztof Halasa <khc@pm.waw.pl> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Laura Abbott <lauraa@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-04-08arm: Use generic idle loopThomas Gleixner1-1/+2
Use the generic idle loop and replace enable/disable_hlt with the respective core functions. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Reviewed-by: Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Russell King <linux@arm.linux.org.uk> Tested-by: Kevin Hilman <khilman@linaro.org> # OMAP Link: http://lkml.kernel.org/r/20130321215233.826238797@linutronix.de
2013-01-14Merge branch 'clocksource/cleanup' into next/cleanupOlof Johansson1-9/+2
Clockevent cleanup series from Shawn Guo. Resolved move/change conflict in mach-pxa/time.c due to the sys_timer cleanup. * clocksource/cleanup: clocksource: use clockevents_config_and_register() where possible ARM: use clockevents_config_and_register() where possible clockevents: export clockevents_config_and_register for module use + sync to Linux 3.8-rc3 Signed-off-by: Olof Johansson <olof@lixom.net> Conflicts: arch/arm/mach-pxa/time.c
2013-01-14ARM: use clockevents_config_and_register() where possibleShawn Guo1-9/+2
The clockevent core is able to figure out the best mult and shift, calculate min_delta_ns and max_delta_ns, with the necessary info passed into clockevents_config_and_register(). Use this combined configure and register function where possible to make the codes less error prone and gain some positive diff stat. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Reviewed-by: Anton Vorontsov <cbouatmailru@gmail.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Tested-by: Roland Stigge <stigge@antcom.de> Acked-by: Eric Miao <eric.y.miao@gmail.com> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: David Brown <davidb@codeaurora.org> Tested-by: Tony Lindgren <tony@atomide.com> Acked-by: Barry Song <baohua.song@csr.com> Tested-by: Stephen Warren <swarren@nvidia.com> Acked-by: Tony Prisk <linux@prisktech.co.nz> Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-12-24ARM: delete struct sys_timerStephen Warren1-4/+0
Now that the only field in struct sys_timer is .init, delete the struct, and replace the machine descriptor .timer field with the initialization function itself. This will enable moving timer drivers into drivers/clocksource without having to place a public prototype of each struct sys_timer object into include/linux; the intent is to create a single of_clocksource_init() function that determines which timer driver to initialize by scanning the device dtree, much like the proposed irqchip_init() at: http://www.spinics.net/lists/arm-kernel/msg203686.html Includes mach-omap2 fixes from Igor Grinberg. Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-22IXP4xx: map CPU config registers within VMALLOC region.Krzysztof Hałasa1-8/+0
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2012-11-22IXP4xx: Always ioremap() Queue Manager MMIO region at boot.Krzysztof Hałasa1-0/+5
It doesn't make much sense to map QMgr dynamically - we almost always need it and the static mapping will be needed for little-endian data-coherent operation (to make QMgr region value-coherent). Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2012-09-19ARM: ixp4xx: use __iomem pointers for MMIOArnd Bergmann1-4/+4
ARM is moving to stricter checks on readl/write functions, so we need to use the correct types everywhere. At the moment, this patch conflicts with other patches in linux-next, need to sort this out. Cc: Imre Kaloz <kaloz@openwrt.org> Cc: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-23ixp4xx: fix compilation by adding gpiolib supportRichard Cochran1-2/+46
Once again, ixp4xx no longer even compiles. This patch fixes the issue by converting over to gpiolib. This patch was first made by Imre and posted by Marc, and I added in Russell's suggestion to empty the gpio header file. This fix should also go for 3.1, 3.2, 3.3, and 3.4. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-31Merge tag 'fixes-for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull a few more ARM platform fixes from Olof Johansson: "Apologies for back-to-back fixes pull requests, but one of the patches below are the kind we'll see posted over and over if we don't send it in. I hadn't done the full sanity-check of defconfig builds by the time I sent up the other fixes yesterday or I would have included it then. Two patches, one dealing with the system.h fallout, the other is a missing linux/bug.h in a place where ARRAY_SIZE() is used." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: clps711x: fix missing include file ARM: fix builds due to missing <asm/system_misc.h> includes
2012-03-31ARM: fix builds due to missing <asm/system_misc.h> includesOlof Johansson1-0/+1
This does a sweeping change fixing up all the missing system_misc.h and system_info.h includes from the system.h split-up change. These were the ones I came across when building all defconfigs in arch/arm/configs, there might be more but they lack adequate build coverage to be easily caught. I'm expecting to get a lot of these piecemeal by each maintainer, so we might just as well do one sweeping change to get them all at once. Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Imre Kaloz <kaloz@openwrt.org> Cc: Krzysztof Halasa <khc@pm.waw.pl> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-03-07ARM: ixp4xx: use runtime ioremap hookRob Herring1-0/+33
Convert ixp4xx platforms to use run-time ioremap hook instead of the compile time hook. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Imre Kaloz <kaloz@openwrt.org> Cc: Krzysztof Halasa <khc@pm.waw.pl>
2012-01-21ARM: mach-ixp4xx: properly disable CPU idle callNicolas Pitre1-0/+6
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2012-01-05Merge branch 'restart' into for-linusRussell King1-0/+20
Conflicts: arch/arm/mach-exynos/cpu.c The changes to arch/arm/mach-exynos/cpu.c were moved to mach-exynos/common.c.
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-29 14:20:45 +0300