summaryrefslogtreecommitdiff
path: root/arch/arm/mach-hisi
AgeCommit message (Collapse)AuthorFilesLines
2016-07-07ARM: hisi: consolidate the hisilicon machine entriesJiancheng Xue1-28/+0
The original patch was to add compatible string for Hi3519 soc and do some cleanup. Since the generic machine entry could meet most of the cases, so I did a further cleanup to reuse it and just keep one machine entry that needs map_io here. Signed-off-by: Jiancheng Xue <xuejiancheng@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-06-28ARM: hisi: make unexported symbols staticBen Dooks1-2/+2
The two functions hix5hd2_set_scu_boot_addr() and hip01_set_boot_addr() are not declared or exported outside arch/arm/mach-hisi/platsmp.c file. Avoid the following warnings by making them static: arch/arm/mach-hisi/platsmp.c:142:6: warning: symbol 'hip01_set_boot_addr' was not declared. Should it be static? arch/arm/mach-hisi/platsmp.c:106:6: warning: symbol 'hix5hd2_set_scu_boot_addr' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2015-12-02ARM: use "depends on" for SoC configs instead of "if" after promptMasahiro Yamada1-4/+8
Many ARM sub-architectures use prompts followed by "if" conditional, but it is wrong. Please notice the difference between config ARCH_FOO bool "Foo SoCs" if ARCH_MULTI_V7 and config ARCH_FOO bool "Foo SoCs" depends on ARCH_MULTI_V7 These two are *not* equivalent! In the former statement, it is not ARCH_FOO, but its prompt that depends on ARCH_MULTI_V7. So, it is completely valid that ARCH_FOO is selected by another, but ARCH_MULTI_V7 is still disabled. As it is not unmet dependency, Kconfig never warns. This is probably not what you want. The former should be used only when you need to do so, and you really understand what you are doing. (In most cases, it should be wrong!) For enabling/disabling sub-architectures, the latter is always correct. As a good side effect, this commit fixes some entries over 80 columns (mach-imx, mach-integrator, mach-mbevu). [Arnd: I note that there is not really a bug here, according to the discussion that followed, but I can see value in being consistent and in making the lines shorter] Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Jun Nie <jun.nie@linaro.org> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Krzysztof Halasa <khc@piap.pl> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-02ARM: use const and __initconst for smp_operationsMasahiro Yamada2-4/+4
These smp_operations structures are not over-written, so add "const" qualifier and replace __initdata with __initconst. Also, add "static" where it is possible. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Moritz Fischer <moritz.fischer@ettus.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org> # qcom part Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Wei Xu <xuwei5@hisilicon.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-02ARM: hisi: do not export smp_operations structuresMasahiro Yamada2-6/+3
These three structures are only defined and referenced in mach-hisi/platsmp.c. Drop the declarations from the header and add static qualifier to the definitions. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Wei Xu <xuwei5@hisilicon.com>
2015-07-20ARM: hisi: Remove clk-provider.h includeStephen Boyd1-1/+0
This file doesn't use the clk provider APIs. Remove the include. Cc: Haojian Zhuang <haojian.zhuang@linaro.org> Cc: Wei Xu <xuwei5@hisilicon.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-06-12Merge branch 'for-arm-soc' into for-nextRussell King4-20/+3
2015-06-01ARM: v7 setup function should invalidate L1 cacheRussell King4-20/+3
All ARMv5 and older CPUs invalidate their caches in the early assembly setup function, prior to enabling the MMU. This is because the L1 cache should not contain any data relevant to the execution of the kernel at this point; all data should have been flushed out to memory. This requirement should also be true for ARMv6 and ARMv7 CPUs - indeed, these typically do not search their caches when caching is disabled (as it needs to be when the MMU is disabled) so this change should be safe. ARMv7 allows there to be CPUs which search their caches while caching is disabled, and it's permitted that the cache is uninitialised at boot; for these, the architecture reference manual requires that an implementation specific code sequence is used immediately after reset to ensure that the cache is placed into a sane state. Such functionality is definitely outside the remit of the Linux kernel, and must be done by the SoC's firmware before _any_ CPU gets to the Linux kernel. Changing the data cache clean+invalidate to a mere invalidate allows us to get rid of a lot of platform specific hacks around this issue for their secondary CPU bringup paths - some of which were buggy. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Dinh Nguyen <dinguyen@opensource.altera.com> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Tested-by: Thierry Reding <treding@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Michal Simek <michal.simek@xilinx.com> Tested-by: Wei Xu <xuwei5@hisilicon.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-05-28ARM: 8370/1: hisi: fix hip04 build without HOTPLUG_CPUArnd Bergmann1-0/+4
The hip04 smp implementation provides the hotplug operations (cpu_die and cpu_kill) unconditionally at the moment, which leads to a build error when HOTPLUG_CPU is disabled: mach-hisi/platmcpm.c:242:13: note: (near initialization for 'hip04_smp_ops') mach-hisi/platmcpm.c:242:2: error: unknown field 'cpu_die' specified in initializer mach-hisi/platmcpm.c:243:2: error: unknown field 'cpu_kill' specified in initializer This uses an #ifdef to remove the code from the build when that option is not set. Fixes: 905cdf9dda5d ("ARM: hisi/hip04: remove the MCPM overhead") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Pitre <nico@xxxxxxxxxx> Acked-by: Wei Xu <xuwei5@hisilicon.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-05-06ARM: hisi/hip04: remove the MCPM overheadNicolas Pitre1-85/+42
This platform is currently relying on the MCPM infrastructure for no apparent reason. The MCPM concurrency handling brings no benefits here as there is no asynchronous CPU wake-ups to be concerned about (this is used for CPU hotplug and secondary boot only, not for CPU idle). This platform is also different from the other MCPM users because a given CPU can't shut itself down completely without the assistance of another CPU. This is at odds with the on-going MCPM backend refactoring. To simplify things, this is converted to hook directly into the smp_operations callbacks, bypassing the MCPM infrastructure. Tested-by: Wei Xu <xuwei5@hisilicon.com> Cc: Haojian Zhuang <haojian.zhuang@linaro.org> Signed-off-by: Nicolas Pitre <nico@linaro.org>
2015-02-19ARM: make arrays containing machine compatible strings constUwe Kleine-König1-4/+4
The definition static const char *axxia_dt_match[] __initconst = { ... defines a changable array of constant strings. That is you must not do: *axxia_dt_match[0] = 'k'; but axxia_dt_match[0] = "different string"; is fine. So the annotation __initconst is wrong and yields a compiler error when other really const variables are added with __initconst. As the struct machine_desc member dt_compat is declared as const char *const *dt_compat; making the arrays const is the better alternative over changing all annotations to __initdata. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-01-22ARM: hisi: enable smp for HiP01Wang Long3-0/+84
Enable smp for HiP01 board. Signed-off-by: Wang Long <long.wanglong@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com> [olof: split off the dts change to a separate commit] Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-22ARM: hisi: rename secondary_startup functionWang Long3-3/+3
As hix5hd2 and hip01 has the same secondary_startup so rename hix5hd2_secondary_startup to to hisi_secondary_startup. the hip01 will use hisi_secondary_startup for the secondary core boot. Signed-off-by: Wang Long <long.wanglong@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-22ARM: hisi: rename smp_prepares_cpus functionWang Long1-2/+2
As hix5hd2 and hip01 has the same .smp_prepare_cpus in struct smp_operations, so rename hix5hd2_smp_prepare_cpus to hisi_common_smp_prepare_cpus. the hip01 will use hisi_common_smp_prepare_cpus in its struct smp_operations. Signed-off-by: Wang Long <long.wanglong@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-22ARM: hisi: enable HiP01 SoCWang Long2-0/+18
Enable Hisilicon HiP01 SoC. This HiP01 SoC series support both one core or dual cores and quad cores. The core is Cortex A9. Signed-off-by: Wang Long <long.wanglong@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-10-02ARM: hisi: depend on ARCH_MULTI_V7Arnd Bergmann1-1/+1
hisi has a general dependency on ARCH_MULTIPLATFORM, which is problematic when building a kernel for non-V7 platforms but selecting drivers that might conflict with other architecture levels. In this case, it broke my (still out of tree) patch set that enables V7M multiplatform support, since that does not enable MULTI_IRQ support: arch/arm/kernel/built-in.o: In function `set_handle_irq': arch/arm/kernel/irq.c:125: undefined reference to `handle_arch_irq' arch/arm/kernel/built-in.o: In function `setup_arch': arch/arm/kernel/setup.c:965: undefined reference to `handle_arch_irq' Since all hisilicon platforms are ARMv7 based, we can avoid this problem by just making the dependency more specific. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Wei Xu <xuwei5@hisilicon.com>
2014-09-24ARM: hisi: Fix platmcpm compilation when ARMv6 is selectedWei Xu1-0/+2
When compiling with "ARCH=arm" and "allmodconfig", with commit: 9cdc99919a95e8b54c1998b65bb1bfdabd47d27b [2/7] ARM: hisi: enable MCPM implementation we will get: /tmp/cc6DjYjT.s: Assembler messages: /tmp/cc6DjYjT.s:63: Error: selected processor does not support ARM mode `ubfx r1,r0,#8,#8' /tmp/cc6DjYjT.s:761: Error: selected processor does not support ARM mode `isb ' /tmp/cc6DjYjT.s:762: Error: selected processor does not support ARM mode `dsb ' /tmp/cc6DjYjT.s:769: Error: selected processor does not support ARM mode `isb ' /tmp/cc6DjYjT.s:775: Error: selected processor does not support ARM mode `isb ' /tmp/cc6DjYjT.s:776: Error: selected processor does not support ARM mode `dsb ' /tmp/cc6DjYjT.s:795: Error: selected processor does not support ARM mode `isb ' /tmp/cc6DjYjT.s:801: Error: selected processor does not support ARM mode `isb ' /tmp/cc6DjYjT.s:802: Error: selected processor does not support ARM mode `dsb ' Fix platmcpm compilation when ARMv6 is selected. Signed-off-by: Wei Xu <xuwei5@hisilicon.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-09-03ARM: hisi: enable HiP04Haojian Zhuang2-0/+18
Support HiP04 SoC what supports 16 cores. And it relies on MCPM framework. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2014-09-03ARM: hisi: enable MCPM implementationHaojian Zhuang2-0/+387
Multiple CPU clusters are used in Hisilicon HiP04 SoC. Now use MCPM framework to manage power on HiP04 SoC. Changelog: v20: * Disable L2 prefetch when the whole cluster is down. * Move disabling snoop filter into power_down() after L2 prefetch disabled. * Remove delay in wait_for_power_down() after L2 prefetch disabled. * Add the sleep polling in wait_for_power_down() again since we need to wait L2 when the cluster is down. v19: * Add comments on those delay hacks. * Update on checking core enabled counts in wait_for_power_down(). v18: * Fix to release resource in probe(). * Check whether cpu is already up in the process of making cpu down. * Add udelay in power up/down sequence. * Optimize on setting relocation entry. * Optimize on polling status in wait_for_power_down(). * Add mcpm critical operations. v17: * Parse bootwrapper parameters in DTS file. * Fix to use msleep() in spinlock region. v16: * Parse bootwrapper parameters in command line instead. v13: * Restore power down operation in MCPM. * Fix disabling snoop filter issue in MCPM. v12: * Use wfi as power down state in MCPM. * Remove wait_for_powerdown() in MCPM because wfi is used now. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Reviewed-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2014-07-31ARM: hisi: remove smp from machine descriptorHaojian Zhuang2-4/+3
Use CPU_METHOD_OF_DECLARE() instead. And declare smp method in dts file. Changelog: v6: * Use hisilicon,hi3620-smp as enable-method property in Hi3620 dts. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Acked-by: Wei Xu <xuwei5@hisilicon.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-31power: reset: move hisilicon reboot codeHaojian Zhuang2-33/+3
Move reboot code from hisilicon platform driver into reset driver. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Acked-by: Wei Xu <xuwei5@hisilicon.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-31ARM: hisi: enable hix5hd2 SoCHaifeng Yan7-6/+150
Enable support for the Hisilicon HiX5HD2 SoC. This HiX5HD2 SoC series support both single and dual Cortex-A9 cores. Add ARCH_HIX5HD2 to distinguish HiX5HD2 from Hi3xxx. They are different in implementation such as SMP, IPs integarted and earlycon configure. Signed-off-by: Haifeng Yan <yanhaifeng@gmail.com> Signed-off-by: Jiancheng Xue <jchxue@gmail.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Acked-by: Wei Xu <xuwei5@hisilicon.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-31ARM: hisi: add ARCH_HISIHaojian Zhuang1-2/+14
Since multiple ARCH configuration will be appended into mach-hisi directory, add ARCH_HISI as common configuration for different platforms in mach-hisi. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Acked-by: Wei Xu <xuwei5@hisilicon.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-04-06Merge tag 'cleanup-3.15' of ↵Linus Torvalds1-5/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Arnd Bergmann: "These cleanup patches are mainly move stuff around and should all be harmless. They are mainly split out so that other branches can be based on top to avoid conflicts. Notable changes are: - We finally remove all mach/timex.h, after CLOCK_TICK_RATE is no longer used (Uwe Kleine-König) - The Qualcomm MSM platform is split out into legacy mach-msm and new-style mach-qcom, to allow easier maintainance of the new hardware support without regressions (Kumar Gala) - A rework of some of the Kconfig logic to simplify multiplatform support (Rob Herring) - Samsung Exynos gets closer to supporting multiplatform (Sachin Kamat and others) - mach-bcm3528 gets merged into mach-bcm (Stephen Warren) - at91 gains some common clock framework support (Alexandre Belloni, Jean-Jacques Hiblot and other French people)" * tag 'cleanup-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (89 commits) ARM: hisi: select HAVE_ARM_SCU only for SMP ARM: efm32: allow uncompress debug output ARM: prima2: build reset code standalone ARM: at91: add PWM clock ARM: at91: move sam9261 SoC to common clk ARM: at91: prepare common clk transition for sam9261 SoC ARM: at91: updated the at91_dt_defconfig with support for the ADS7846 ARM: at91: dt: sam9261: Device Tree support for the at91sam9261ek ARM: at91: dt: defconfig: Added the sam9261 to the list of DT-enabled SOCs ARM: at91: dt: Add at91sam9261 dt SoC support ARM: at91: switch sam9rl to common clock framework ARM: at91/dt: define main clk frequency of at91sam9rlek ARM: at91/dt: define at91sam9rl clocks ARM: at91: prepare common clk transition for sam9rl SoCs ARM: at91: prepare sam9 dt boards transition to common clk ARM: at91: dt: sam9rl: Device Tree for the at91sam9rlek ARM: at91/defconfig: Add the sam9rl to the list of DT-enabled SOCs ARM: at91: Add at91sam9rl DT SoC support ARM: at91: prepare at91sam9rl DT transition ARM: at91/defconfig: refresh at91sam9260_9g20_defconfig ...
2014-03-21ARM: hisi: select HAVE_ARM_SCU only for SMPArnd Bergmann1-1/+1
The SCU code does not build unless we are compiling an SMP kernel. This does the same as every other platform with an SCU. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2014-03-21ARM: hisi: fix building without CONFIG_HOTPLUG_CPUArnd Bergmann2-2/+3
The hisi SMP code always uses the hi3xxx_set_cpu() function defined in the hotplug.c file, so we cannot build without this when CONFIG_SMP is enabled. This patch slightly restructures the code so we always build the parts of hotplug.c that we need but just leave out the CPU disable logic if CONFIG_HOTPLUG_CPU is turned off. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2014-02-20ARM: select HAVE_SMP for V7 multi-platformRob Herring1-1/+0
All V7 platforms can run SMP kernels, so make CONFIG_SMP visible for V7 multi-platform builds. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2014-02-20ARM: centralize common multi-platform kconfig optionsRob Herring1-3/+0
Multi-platform requires various kconfig options to be selected, so platforms don't need to select them individually. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Russell King <linux@arm.linux.org.uk> Acked-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2014-02-03ARM: hisi: fix kconfig warning on HAVE_ARM_TWDRob Herring1-1/+1
Commit "ARM: hisi: don't select SMP" introduced a kconfig warning: warning: (ARCH_HI3xxx) selects HAVE_ARM_TWD which has unmet direct dependencies (SMP) Fix HAVE_ARM_TWD to depend on SMP. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-02-01ARM: hisi: don't select SMPRob Herring1-1/+0
SMP is a user configurable option, not a hardware feature and should not be selected. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20ARM: hisi: remove init_timeHaojian Zhuang1-7/+0
Since init_time in machine descriptor is already covered by arch/arm/kernel/time.c by default. We needn't to append it any more. Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-12-20ARM: hisi: rename hi3xxx to hisiHaojian Zhuang6-0/+425
Since some new Hisilicon SoCs are not named as hi3xxx, rename mach-hi3xxx to mach-hisi instead. And the pronounciation of "hisi" is similar to the chinese pronounciation of Hisilicon. So Hisilicon guys like this name. ARCH_HI3xxx will be renamed later since other drivers are using it and they are still in linux-next git tree. So rename ARCH_HI3xxx later. Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Kevin Hilman <khilman@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-11 13:39:51 +0300