summaryrefslogtreecommitdiff
path: root/arch/arm/mach-ep93xx/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2015-07-17ARM: ep93xx: remove memory configuration optionsH Hartley Sweeten1-54/+0
The ARM_PATCH_PHYS_VIRT option makes the ep93xx memory configuration options obsolete. This allows support for all the ep93xx variations to be built into a single kernel. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-26ARM: ep93xx: use soc busH Hartley Sweeten1-0/+1
Use the soc bus to report the silicon revision and Maverick Key. Both are not currently exposed to the user. In addition, fill in the SoC family and machine for completeness. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Ryan Mallon <rmallon@gmail.com> Cc: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-08-25ARM: 7793/1: debug: use generic option for ep93xx PL10x debug portHartley Sweeten1-14/+0
The generic option DEBUG_LL_UART_PL01X is now used to select the UART type for the kernel low-level debugging on the ep93xx platform. This enables two config options to provide the physical and virtual base address of the debug UART. Use the generic options instead of providing platform specific options to select the debug UART. UART1 is selected with: DEBUG_UART_PHYS = 0x808c0000 DEBUG_UART_VIRT = 0xfedc0000 UART2 is selected with: DEBUG_UART_PHYS = 0x808d0000 DEBUG_UART_VIRT = 0xfedd0000 UART3 is selected with: DEBUG_UART_PHYS = 0x808e0000 DEBUG_UART_VIRT = 0xfede0000 The selected UART must already be initialized by the bootloader. If it isn't setup nothing will appear (which might be desired). Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-04-12arm: ep93xx: use gpio_led_register_deviceH Hartley Sweeten1-0/+5
Use gpio_led_register_device to register the two leds connected to the ep93xx. Since this is a common feature for all ep93xx based boards, create a new Kconfig option, EP93XX_SOC_COMMON, to select the LEDS_GPIO_REGISTER feature. The struct gpio_led and struct gpio_led_platform_data variables have been changed to const struct because of: commit 9517f925f2eb9ffca78b3f0f9389fc675bcb572c leds: make *struct gpio_led_platform_data.leds const They have also been marked as __initconst because the helper function gpio_led_register_device makes a deep copy of the platform data to allow it to live in init memory: commit 4440673a95e63ad888a41db596edaa0c55d3a332 leds: provide helper to register "leds-gpio" devices Signed-off-by: Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Ryan Mallon <rmallon@gmail.com>
2011-10-17ep93xx: add support Vision EP9307 SoMHartley Sweeten1-0/+7
Add support for Vision Engraving Systems EP9307 based SoM. Signed-off-by: Hartley Sweeten <hartleys@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2010-02-15ARM: 5937/1: Add support for EP9315 based Snapper CL15 boardRyan Mallon1-0/+7
Add support for Bluewater Systems EP9315 based Snapper CL15 single board computer module. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> Acked-by: Hartley Sweeten <hartleys@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-26ARM: 5892/1: ep93xx: Add support for Simplemachines Sim.One boardRyan Mallon1-0/+7
Add support for the Simplemachines EP9307 based Sim.One board. Cc: Hartley Sweeten <hartleys@visionengravers.com> Cc: Sergio Sorrenti <sergio.sorrenti@gmail.com> Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> Acked-by: Hartley Sweeten <hartleys@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-07ARM: 5751/1: ep93xx/micro9: Add Micro9-SlimHubert Feurstein1-0/+8
Add Contec Micro9-Slim support Cc: Ryan Mallon <ryan@bluewatersys.com> Requires: 5750/1 Signed-off-by: Hubert Feurstein <hubert.feurstein@contec.at> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-07ARM: 5750/1: ep93xx/micro9: Update platform codeHubert Feurstein1-7/+7
Update Contec Micro9 platform code Cc: Ryan Mallon <ryan@bluewatersys.com> Requires: 5749/1 Signed-off-by: Hubert Feurstein <hubert.feurstein@contec.at> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-07ARM: 5744/1: ep93xx: add remaining phys offset selectionsHartley Sweeten1-2/+20
This adds the missing Kconfig options for the first SDRAM bank address on ep93xx boards. Cc: Hubert Feurstein <(address hidden)> Signed-off-by: H Hartley Sweeten <(address hidden)> Acked-by: Ryan Mallon <(address hidden)> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-24[ARM] 5523/1: ep93xx phys offset selectionRyan Mallon1-2/+32
This patch adds a Kconfig option to select between ep93xx boards which boot from the SDRAM bank at 0x00000000 (SDCE3/SyncBoot) and those which boot from 0xc0000000 (SDCE0). This corrects a problem which causes invalid images to be built for boards which boot from 0xc0000000. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-15[ARM] 5504/1: ep93xx: Merge all edb93xx platformsHartley Sweeten1-17/+35
The Cirrus Logic EDB93xx development board platform init files share redundant code. The only differences are in the flash memory configuration, MACH_TYPE, and additional on-board I2C devices. This patch merges all of them into one file. Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Herbert Valerio Riedel <hvr@gnu.org> Cc: Toufeeq Hussain <toufeeq_hussain@infosys.com> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-01[ARM] 5309/1: ep93xx: add edb9307a platformHartley Sweeten1-0/+6
Add Cirrus Logic EDB9307A Dev Board to arch/arm/mach-ep93xx Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-03[ARM] 5276/1: ep93xx: allow selecting UART for early kernel messagesHartley Sweeten1-0/+14
Currently on the EP93xx platform early kernel messages go to UART1. Since this UART is the only one that has modem control signals it might be used for another purpose and it is undesirable for those messages to appear. This patch allows one of the other UARTs to be selected in the kernel configuration. It is assumed that the bootloader has configured and initialized the UART since this was the previous assumption. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-13[ARM] 4572/1: ep93xx: add cirrus logic edb9307 supportHerbert Valerio Riedel1-0/+6
This patch adds support for the Cirrus Logic EDB9307, an evaluation board based on the Cirrus Logic EP9307 SoC, which features amongst other things 64M RAM, 32M NOR flash, 3 USB host ports, audio in/out, two serial ports and a 10/100 ethernet interface. Signed-off-by: Herbert Valerio Riedel <hvr@gnu.org> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-06[ARM] 4047/1: Add initial board support for Contec Hypercontrol Micro9 boards.Manfred Gruber1-0/+25
Contec Micro9 (H/M/L) boards based on Cirrus Logic ep93xx (ep9315/ep9307/ep9302). Signed-off-by: Manfred Gruber <m.gruber@tirol.com> Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-07[ARM] 3993/1: ep93xx: add cirrus logic edb9302a supportLennert Buytenhek1-0/+6
Add support for the Cirrus Logic EDB9302A Evaluation Board. Confirmed to work by Chase Douglas. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-01[ARM] 3964/1: ep93xx: add ads sphere supportLennert Buytenhek1-0/+6
Add initial board support for the ADS Sphere board. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3811/1: ep93xx: add cirrus logic edb9312 supportLennert Buytenhek1-0/+6
Add Cirrus Logic EDB9312 support. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-01[ARM] 3706/2: ep93xx: add cirrus logic edb9315a supportLennert Buytenhek1-0/+6
Patch from Lennert Buytenhek This patch adds support for the Cirrus Logic EDB9315A, an evaluation board based on the Cirrus Logic EP9315 SoC, with 64M RAM, two USB host ports, audio in/out, three serial ports, 10/100 ethernet, and IDE, VGA, and LCD interfaces. The EDB9315A is a low-cost version of the EDB9315, and has only 16M of NOR flash, while the EDB9315 has 32M. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-29[ARM] 3674/1: ep93xx: add cirrus logic edb9302 supportLennert Buytenhek1-0/+6
Patch from Lennert Buytenhek This patch adds support for the Cirrus Logic EDB9302, an evaluation board based on the Cirrus Logic EP9302 SoC, with 32M RAM, one USB host port, audio in/out, two serial ports and a 10/100 ethernet interface. George Kashperko submitted the original patch, this patch is a rewrite using the newer physmap platform driver. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-28[ARM] 3671/1: ep93xx: add cirrus logic edb9315 supportLennert Buytenhek1-0/+6
Patch from Lennert Buytenhek This patch adds support for the Cirrus Logic EDB9315, an evaluation board based on the Cirrus Logic EP9315 SoC, with 64M RAM, two USB host ports, audio in/out, three serial ports, 10/100 ethernet, and IDE, VGA, and LCD interfaces. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-28[ARM] 3370/2: ep93xx: add crunch supportLennert Buytenhek1-0/+5
Patch from Lennert Buytenhek Add the necessary kernel bits for crunch task switching. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-22[ARM] 3369/1: ep93xx: add core cirrus ep93xx supportLennert Buytenhek1-0/+21
Patch from Lennert Buytenhek This patch adds support for the Cirrus ep93xx series of CPUs. The ep93xx is an ARM920T based CPU with two VICs, PL010 based UARTs, IrDA, MaverickCrunch floating point coprocessor, between 24 and 64 GPIOs, ethernet, OHCI USB and, depending on the model, pcmcia, raster engine, graphics accelerator, IDE controller and a bunch of other stuff. This patch adds the core ep93xx support code, and support for the Glomation GESBC-9312-sx and the Technologic Systems TS-72xx SBCs. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-01 00:27:32 +0300