summaryrefslogtreecommitdiff
path: root/arch/arm/mach-davinci/psc.c
AgeCommit message (Collapse)AuthorFilesLines
2015-12-01ARM: davinci: make headers more localArnd Bergmann1-1/+1
Some header files are never included outside of a mach-davinci directory and do not need to be made visible in include/mach, so let's just move them all down one level. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Sekhar Nori <nsekhar@ti.com>
2013-01-22ARM: davinci: psc: introduce reset APIRobert Tivy1-0/+25
Introduce an IP reset API for use on DaVinci SoC. There is no existing "reset" framework support for SoC devices. The remoteproc driver needs explicit control of the DSP's reset line. To support this, a new DaVinci specific API is added. This private API will disappear with DT migration. Some discussion regarding a proposed DT "reset" binding is here: https://patchwork.kernel.org/patch/1635051/ Modify davinci_clk_init() to set clk "reset" function for clocks that indicate PSC_LRST support. Also fix indentation issue with function opening curly brace. Signed-off-by: Robert Tivy <rtivy@ti.com> [nsekhar@ti.com: rename davinci_psc_config_reset() to davinci_psc_reset()] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-01-17ARM: davinci: psc.c: change pr_warning() to pr_warn()Robert Tivy1-2/+2
Change all pr_warning() calls to pr_warn(), as advised by checkpatch.pl. Signed-off-by: Robert Tivy <rtivy@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2011-12-05ARM: davinci: psc: fix incorrect offsetsMurali Karicheri1-8/+8
Seperate PDSTAT and PDCTL registers are defined for domain 0 and domain 1 where as the code always reads the domain 0 PDSTAT register and domain 1 PDCTL register. Fix this issue. While at it, introduce usage of macros for register masks to improve readability. Reviewed-by: Sergei Shtylyov <sshtylyov@mvista.com> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2011-12-05ARM: davinci: psc: fix incorrect maskMurali Karicheri1-1/+1
There are 5 LSB bits defined in PDSTAT and the code currently uses a mask of 1 bit to check the status. Use a proper mask per the hardware specification. While at it, use a #define for the mask to improve readability. Reviewed-by: Sergei Shtylyov <sshtylyov@mvista.com> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2011-07-08davinci: enable forced transitions on PSCSekhar Nori1-0/+2
Some DaVinci modules like the SATA on DA850 need forced module state transitions. Define a "force" flag which can be passed to the PSC config function to enable it to make forced transitions. Forced transitions shouldn't normally be attempted, unless the TRM explicitly specifies its usage. ChangeLog: v2: Modified to take care of the fact that davinci_psc_config() now takes the flags directly. Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2011-07-08davinci: pass clock flags to davinci_psc_config()Sekhar Nori1-1/+11
Enabling or disabling a PSC can take certain modifiers like "disable with reset", "force enable/disable" and "enable/disable with local reset" apart from the regular clock gating functionality. Pass a flags argument to davinci_psc_config() so these variations can be supported there. At this time only "disable with reset" is supported, but other functionality will be added in subsequent patches. Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2010-12-10davinci: psc: simplify if-statementNicolas Kaiser1-9/+4
A common do-while loop can be factored out from the end of the branches. Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-13Davinci: psc - use ioremap()Cyril Chemparathy1-2/+5
This patch modifies the psc and clock control code to use ioremap()ed registers. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-07Davinci: support LPSC SwRstDisable stateCyril Chemparathy1-2/+1
The current clock control code always gates the clock (PSC state Disable = 2) on clk_disable(). Some on-chip peripherals (e.g. LCD controller on TNETV107X) need to be put into SwRstDisable = 0 on clock disable, to maintain hardware sanity. This patch extends the davinci_psc_config() arguments to pass in the desired module state instead of a boolean enable/disable. Further, clk_disable() now checks for the PSC_SWRSTDISABLE clk flag before selecting the target state. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-02-05davinci: move PSC register definitions from psc.c to psc.hSekhar Nori1-11/+0
The motivation behind the change is to use the same definitions in the assembly code responsible for suspending the SoC, a part of which is to clock gate the DDR2 clock. Note that the assembly code cannot invoke the C function meant for this. The main reason being that stack in DDR2 cannot be accessed while DDR2 clock is being clock gated. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-11-25DaVinci: remove unneeded #include'sSergei Shtylyov1-3/+0
There have accumulated quite a lot of them after the code reorganizations... In several cases I had to replace #include <linux/dma-mapping.h> which wasn't needed directly but happened to #include <linux/err.h> which was needed. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-05-26davinci: Add support for multiple PSCsMark A. Greer1-7/+25
The current code to support the DaVinci Power and Sleep Controller (PSC) assumes that there is only one controller. This assumption is no longer valid so expand the support to allow greater than one PSC. To accomplish this, put the base addresses for the PSCs in the SoC infrastructure so it can be referenced by the PSC code. This also requires adding an extra parameter to davinci_psc_config() to specify the PSC that is to be enabled/disabled. Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-04-27davinci: PSC: Clear bits in MDCTL reg before setting new bitsMark A. Greer1-11/+6
Clear any set bits in the 'NEXT' field of the MDCTL register in the Power and Sleep Controller (PSC) before setting any new bits. This also allows some minor cleanup by removing some no longer needed lines of code. Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-04-23davinci: add arch_ioremap() which uses existing static mappingsKevin Hilman1-0/+2
Add arch-specific ioremap() which uses any existing static mappings in place of doing a new mapping. From now on, drivers should always use ioremap() instead of IO_ADDRESS(). In addition, remove the davinci_[read|write]* macros in favor of using ioremap. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-04-23davinci: major rework of clock, PLL, PSC infrastructureKevin Hilman1-58/+23
This is a significant rework of the low-level clock, PLL and Power Sleep Controller (PSC) implementation for the DaVinci family. The primary goal is to have better modeling if the hardware clocks and features with the aim of DVFS functionality. Highlights: - model PLLs and all PLL-derived clocks - model parent/child relationships of PLLs and clocks - convert to new clkdev layer - view clock frequency and refcount via /proc/davinci_clocks Special thanks to significant contributions and testing by David Brownell. Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2008-10-11Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds1-1/+1
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (236 commits) [ARM] 5300/1: fixup spitz reset during boot [ARM] 5295/1: make ZONE_DMA optional [ARM] 5239/1: Palm Zire 72 power management support [ARM] 5298/1: Drop desc_handle_irq() [ARM] 5297/1: [KS8695] Fix two compile-time warnings [ARM] 5296/1: [KS8695] Replace macro's with trailing underscores. [ARM] pxa: allow multi-machine PCMCIA builds [ARM] pxa: add preliminary CPUFREQ support for PXA3xx [ARM] pxa: add missing ACCR bit definitions to pxa3xx-regs.h [ARM] pxa: rename cpu-pxa.c to cpufreq-pxa2xx.c [ARM] pxa/zylonite: add support for USB OHCI [ARM] ohci-pxa27x: use ioremap() and offset for register access [ARM] ohci-pxa27x: introduce pxa27x_clear_otgph() [ARM] ohci-pxa27x: use platform_get_{irq,resource} for the resource [ARM] ohci-pxa27x: move OHCI controller specific registers into the driver [ARM] ohci-pxa27x: introduce flags to avoid direct access to OHCI registers [ARM] pxa: move I2S register and bit definitions into pxa2xx-i2s.c [ARM] pxa: simplify DMA register definitions [ARM] pxa: make additional DCSR bits valid for PXA3xx [ARM] pxa: move i2c register and bit definitions into i2c-pxa.c ... Fixed up conflicts in arch/arm/mach-versatile/core.c sound/soc/pxa/pxa2xx-ac97.c sound/soc/pxa/pxa2xx-i2s.c manually.
2008-09-17[ARM] 5249/1: davinci: remove redundant check in davinci_psc_config()roelkluin1-3/+0
id is unsigned, check is redundant. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-06[ARM] Convert asm/io.h to linux/io.hRussell King1-1/+1
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/machRussell King1-3/+3
This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07[ARM] Remove asm/hardware.h, use asm/arch/hardware.h insteadRussell King1-1/+1
Remove includes of asm/hardware.h in addition to asm/arch/hardware.h. Then, since asm/hardware.h only exists to include asm/arch/hardware.h, update everything to directly include asm/arch/hardware.h and remove asm/hardware.h. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12[ARM] 4432/5: davinci: pin mux supportVladimir Barinov1-30/+57
Support pin multiplexing configurations driver for TI DaVinci SoC Signed-off-by: Vladimir Barinov <vbarinov@ru.mvista.com> Acked-by: Kevin Hilman <khilman@mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-11[ARM] 4303/3: base kernel support for TI DaVinciKevin Hilman1-0/+113
Add base kernel support for the TI DaVinci platform. This patch only includes interrupts, timers, CPU identification, serial support and basic power and sleep controller init. More drivers to come. Signed-off-by: Kevin Hilman <khilman@mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-16 03:42:13 +0300