summaryrefslogtreecommitdiff
path: root/arch/arm/kvm
AgeCommit message (Collapse)AuthorFilesLines
2014-08-07Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds9-155/+260
Pull second round of KVM changes from Paolo Bonzini: "Here are the PPC and ARM changes for KVM, which I separated because they had small conflicts (respectively within KVM documentation, and with 3.16-rc changes). Since they were all within the subsystem, I took care of them. Stephen Rothwell reported some snags in PPC builds, but they are all fixed now; the latest linux-next report was clean. New features for ARM include: - KVM VGIC v2 emulation on GICv3 hardware - Big-Endian support for arm/arm64 (guest and host) - Debug Architecture support for arm64 (arm32 is on Christoffer's todo list) And for PPC: - Book3S: Good number of LE host fixes, enable HV on LE - Book3S HV: Add in-guest debug support This release drops support for KVM on the PPC440. As a result, the PPC merge removes more lines than it adds. :) I also included an x86 change, since Davidlohr tied it to an independent bug report and the reporter quickly provided a Tested-by; there was no reason to wait for -rc2" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (122 commits) KVM: Move more code under CONFIG_HAVE_KVM_IRQFD KVM: nVMX: fix "acknowledge interrupt on exit" when APICv is in use KVM: nVMX: Fix nested vmexit ack intr before load vmcs01 KVM: PPC: Enable IRQFD support for the XICS interrupt controller KVM: Give IRQFD its own separate enabling Kconfig option KVM: Move irq notifier implementation into eventfd.c KVM: Move all accesses to kvm::irq_routing into irqchip.c KVM: irqchip: Provide and use accessors for irq routing table KVM: Don't keep reference to irq routing table in irqfd struct KVM: PPC: drop duplicate tracepoint arm64: KVM: fix 64bit CP15 VM access for 32bit guests KVM: arm64: GICv3: mandate page-aligned GICV region arm64: KVM: GICv3: move system register access to msr_s/mrs_s KVM: PPC: PR: Handle FSCR feature deselects KVM: PPC: HV: Remove generic instruction emulation KVM: PPC: BOOKEHV: rename e500hv_spr to bookehv_spr KVM: PPC: Remove DCR handling KVM: PPC: Expose helper functions for data/inst faults KVM: PPC: Separate loadstore emulation from priv emulation KVM: PPC: Handle magic page in kvmppc_ld/st ...
2014-08-05Merge tag 'signed-kvm-ppc-next' of git://github.com/agraf/linux-2.6 into kvmPaolo Bonzini1-1/+1
Patch queue for ppc - 2014-08-01 Highlights in this release include: - BookE: Rework instruction fetch, not racy anymore now - BookE HV: Fix ONE_REG accessors for some in-hardware registers - Book3S: Good number of LE host fixes, enable HV on LE - Book3S: Some misc bug fixes - Book3S HV: Add in-guest debug support - Book3S HV: Preload cache lines on context switch - Remove 440 support Alexander Graf (31): KVM: PPC: Book3s PR: Disable AIL mode with OPAL KVM: PPC: Book3s HV: Fix tlbie compile error KVM: PPC: Book3S PR: Handle hyp doorbell exits KVM: PPC: Book3S PR: Fix ABIv2 on LE KVM: PPC: Book3S PR: Fix sparse endian checks PPC: Add asm helpers for BE 32bit load/store KVM: PPC: Book3S HV: Make HTAB code LE host aware KVM: PPC: Book3S HV: Access guest VPA in BE KVM: PPC: Book3S HV: Access host lppaca and shadow slb in BE KVM: PPC: Book3S HV: Access XICS in BE KVM: PPC: Book3S HV: Fix ABIv2 on LE KVM: PPC: Book3S HV: Enable for little endian hosts KVM: PPC: Book3S: Move vcore definition to end of kvm_arch struct KVM: PPC: Deflect page write faults properly in kvmppc_st KVM: PPC: Book3S: Stop PTE lookup on write errors KVM: PPC: Book3S: Add hack for split real mode KVM: PPC: Book3S: Make magic page properly 4k mappable KVM: PPC: Remove 440 support KVM: Rename and add argument to check_extension KVM: Allow KVM_CHECK_EXTENSION on the vm fd KVM: PPC: Book3S: Provide different CAPs based on HV or PR mode KVM: PPC: Implement kvmppc_xlate for all targets KVM: PPC: Move kvmppc_ld/st to common code KVM: PPC: Remove kvmppc_bad_hva() KVM: PPC: Use kvm_read_guest in kvmppc_ld KVM: PPC: Handle magic page in kvmppc_ld/st KVM: PPC: Separate loadstore emulation from priv emulation KVM: PPC: Expose helper functions for data/inst faults KVM: PPC: Remove DCR handling KVM: PPC: HV: Remove generic instruction emulation KVM: PPC: PR: Handle FSCR feature deselects Alexey Kardashevskiy (1): KVM: PPC: Book3S: Fix LPCR one_reg interface Aneesh Kumar K.V (4): KVM: PPC: BOOK3S: PR: Fix PURR and SPURR emulation KVM: PPC: BOOK3S: PR: Emulate virtual timebase register KVM: PPC: BOOK3S: PR: Emulate instruction counter KVM: PPC: BOOK3S: HV: Update compute_tlbie_rb to handle 16MB base page Anton Blanchard (2): KVM: PPC: Book3S HV: Fix ABIv2 indirect branch issue KVM: PPC: Assembly functions exported to modules need _GLOBAL_TOC() Bharat Bhushan (10): kvm: ppc: bookehv: Added wrapper macros for shadow registers kvm: ppc: booke: Use the shared struct helpers of SRR0 and SRR1 kvm: ppc: booke: Use the shared struct helpers of SPRN_DEAR kvm: ppc: booke: Add shared struct helpers of SPRN_ESR kvm: ppc: booke: Use the shared struct helpers for SPRN_SPRG0-7 kvm: ppc: Add SPRN_EPR get helper function kvm: ppc: bookehv: Save restore SPRN_SPRG9 on guest entry exit KVM: PPC: Booke-hv: Add one reg interface for SPRG9 KVM: PPC: Remove comment saying SPRG1 is used for vcpu pointer KVM: PPC: BOOKEHV: rename e500hv_spr to bookehv_spr Michael Neuling (1): KVM: PPC: Book3S HV: Add H_SET_MODE hcall handling Mihai Caraman (8): KVM: PPC: e500mc: Enhance tlb invalidation condition on vcpu schedule KVM: PPC: e500: Fix default tlb for victim hint KVM: PPC: e500: Emulate power management control SPR KVM: PPC: e500mc: Revert "add load inst fixup" KVM: PPC: Book3e: Add TLBSEL/TSIZE defines for MAS0/1 KVM: PPC: Book3s: Remove kvmppc_read_inst() function KVM: PPC: Allow kvmppc_get_last_inst() to fail KVM: PPC: Bookehv: Get vcpu's last instruction for emulation Paul Mackerras (4): KVM: PPC: Book3S: Controls for in-kernel sPAPR hypercall handling KVM: PPC: Book3S: Allow only implemented hcalls to be enabled or disabled KVM: PPC: Book3S PR: Take SRCU read lock around RTAS kvm_read_guest() call KVM: PPC: Book3S: Make kvmppc_ld return a more accurate error indication Stewart Smith (2): Split out struct kvmppc_vcore creation to separate function Use the POWER8 Micro Partition Prefetch Engine in KVM HV on POWER8 Conflicts: Documentation/virtual/kvm/api.txt
2014-07-28KVM: Rename and add argument to check_extensionAlexander Graf1-1/+1
In preparation to make the check_extension function available to VM scope we add a struct kvm * argument to the function header and rename the function accordingly. It will still be called from the /dev/kvm fd, but with a NULL argument for struct kvm *. Signed-off-by: Alexander Graf <agraf@suse.de> Acked-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-18ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+Russell King1-1/+2
ARMv6 and greater introduced a new instruction ("bx") which can be used to return from function calls. Recent CPUs perform better when the "bx lr" instruction is used rather than the "mov pc, lr" instruction, and this sequence is strongly recommended to be used by the ARM architecture manual (section A.4.1.1). We provide a new macro "ret" with all its variants for the condition code which will resolve to the appropriate instruction. Rather than doing this piecemeal, and miss some instances, change all the "mov pc" instances to use the new macro, with the exception of the "movs" instruction and the kprobes code. This allows us to detect the "mov pc, lr" case and fix it up - and also gives us the possibility of deploying this for other registers depending on the CPU selection. Reported-by: Will Deacon <will.deacon@arm.com> Tested-by: Stephen Warren <swarren@nvidia.com> # Tegra Jetson TK1 Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> # mioa701_bootresume.S Tested-by: Andrew Lunn <andrew@lunn.ch> # Kirkwood Tested-by: Shawn Guo <shawn.guo@freescale.com> Tested-by: Tony Lindgren <tony@atomide.com> # OMAPs Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com> # Armada XP, 375, 385 Acked-by: Sekhar Nori <nsekhar@ti.com> # DaVinci Acked-by: Christoffer Dall <christoffer.dall@linaro.org> # kvm/hyp Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> # PXA3xx Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> # Xen Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> # ARMv7M Tested-by: Simon Horman <horms+renesas@verge.net.au> # Shmobile Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-07-18ARM: make it easier to check the CPU part number correctlyRussell King1-7/+1
Ensure that platform maintainers check the CPU part number in the right manner: the CPU part number is meaningless without also checking the CPU implement(e|o)r (choose your preferred spelling!) Provide an interface which returns both the implementer and part number together, and update the definitions to include the implementer. Mark the old function as being deprecated... indeed, using the old function with the definitions will now always evaluate as false, so people must update their un-merged code to the new function. While this could be avoided by adding new definitions, we'd also have to create new names for them which would be awkward. Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-07-11ARM: KVM: enable KVM in Kconfig on big-endian systemsVictor Kamensky1-1/+1
Previous patches addresses ARMV7 big-endian virtualiztion, kvm related issues, so enable ARM_VIRT_EXT for big-endian now. Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-07-11ARM: KVM: one_reg coproc set and get BE fixesVictor Kamensky1-9/+79
Fix code that handles KVM_SET_ONE_REG, KVM_GET_ONE_REG ioctls to work in BE image. Before this fix get/set_one_reg functions worked correctly only in LE case - reg_from_user was taking 'void *' kernel address that actually could be target/source memory of either 4 bytes size or 8 bytes size, and code copied from/to user memory that could hold either 4 bytes register, 8 byte register or pair of 4 bytes registers. In order to work in endian agnostic way reg_from_user to reg_to_user functions should copy register value only to kernel variable with size that matches register size. In few place where size mismatch existed fix issue on macro caller side. Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-07-11ARM: KVM: __kvm_vcpu_run function return result fix in BE caseVictor Kamensky1-0/+5
The __kvm_vcpu_run function returns a 64-bit result in two registers, which has to be adjusted for BE case. Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-07-11ARM: KVM: handle 64bit values passed to mrcc or from mcrr instructions in BE ↵Victor Kamensky3-7/+7
case In some cases the mcrr and mrrc instructions in combination with the ldrd and strd instructions need to deal with 64bit value in memory. The ldrd and strd instructions already handle endianness within word (register) boundaries but to get effect of the whole 64bit value represented correctly, rr_lo_hi macro is introduced and is used to swap registers positions when the mcrr and mrrc instructions are used. That has the effect of swapping two words. Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-07-11ARM: KVM: fix vgic V7 assembler code to work in BE imageVictor Kamensky1-0/+14
The vgic h/w registers are little endian; when BE asm code reads/writes from/to them, it needs to do byteswap after/before. Byteswap code uses ARM_BE8 wrapper to add swap only if CONFIG_CPU_BIG_ENDIAN is configured. Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-07-11KVM: ARM: vgic: split GICv2 backend from the main vgic codeMarc Zyngier1-0/+1
Brutally hack the innocent vgic code, and move the GICv2 specific code to its own file, using vgic_ops and vgic_params as a way to pass information between the two blocks. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-07-11KVM: arm/arm64: vgic: move GICv2 registers to their own structureMarc Zyngier1-13/+13
In order to make way for the GICv3 registers, move the v2-specific registers to their own structure. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-07-11arm64: KVM: allow export and import of generic timer regsAlex Bennée1-10/+0
For correct guest suspend/resume behaviour we need to ensure we include the generic timer registers for 64 bit guests. As CONFIG_KVM_ARM_TIMER is always set for arm64 we don't need to worry about null implementations. However I have re-jigged the kvm_arm_timer_set/get_reg declarations to be in the common include/kvm/arm_arch_timer.h headers. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-07-11ARM: KVM: user_mem_abort: support stage 2 MMIO page mappingKim Phillips1-3/+8
A userspace process can map device MMIO memory via VFIO or /dev/mem, e.g., for platform device passthrough support in QEMU. During early development, we found the PAGE_S2 memory type being used for MMIO mappings. This patch corrects that by using the more strongly ordered memory type for device MMIO mappings: PAGE_S2_DEVICE. Signed-off-by: Kim Phillips <kim.phillips@linaro.org> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-07-11ARM: KVM: Unmap IPA on memslot delete/moveEric Auger2-37/+46
Currently when a KVM region is deleted or moved after KVM_SET_USER_MEMORY_REGION ioctl, the corresponding intermediate physical memory is not unmapped. This patch corrects this and unmaps the region's IPA range in kvm_arch_commit_memory_region using unmap_stage2_range. Signed-off-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-07-11arm/arm64: KVM: Fix and refactor unmap_rangeChristoffer Dall1-73/+84
unmap_range() was utterly broken, to quote Marc, and broke in all sorts of situations. It was also quite complicated to follow and didn't follow the usual scheme of having a separate iterating function for each level of page tables. Address this by refactoring the code and introduce a pgd_clear() function. Reviewed-by: Jungseok Lee <jays.lee@samsung.com> Reviewed-by: Mario Smarduch <m.smarduch@samsung.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-06-04Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm into nextLinus Torvalds3-22/+224
Pull KVM updates from Paolo Bonzini: "At over 200 commits, covering almost all supported architectures, this was a pretty active cycle for KVM. Changes include: - a lot of s390 changes: optimizations, support for migration, GDB support and more - ARM changes are pretty small: support for the PSCI 0.2 hypercall interface on both the guest and the host (the latter acked by Catalin) - initial POWER8 and little-endian host support - support for running u-boot on embedded POWER targets - pretty large changes to MIPS too, completing the userspace interface and improving the handling of virtualized timer hardware - for x86, a larger set of changes is scheduled for 3.17. Still, we have a few emulator bugfixes and support for running nested fully-virtualized Xen guests (para-virtualized Xen guests have always worked). And some optimizations too. The only missing architecture here is ia64. It's not a coincidence that support for KVM on ia64 is scheduled for removal in 3.17" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (203 commits) KVM: add missing cleanup_srcu_struct KVM: PPC: Book3S PR: Rework SLB switching code KVM: PPC: Book3S PR: Use SLB entry 0 KVM: PPC: Book3S HV: Fix machine check delivery to guest KVM: PPC: Book3S HV: Work around POWER8 performance monitor bugs KVM: PPC: Book3S HV: Make sure we don't miss dirty pages KVM: PPC: Book3S HV: Fix dirty map for hugepages KVM: PPC: Book3S HV: Put huge-page HPTEs in rmap chain for base address KVM: PPC: Book3S HV: Fix check for running inside guest in global_invalidates() KVM: PPC: Book3S: Move KVM_REG_PPC_WORT to an unused register number KVM: PPC: Book3S: Add ONE_REG register names that were missed KVM: PPC: Add CAP to indicate hcall fixes KVM: PPC: MPIC: Reset IRQ source private members KVM: PPC: Graciously fail broken LE hypercalls PPC: ePAPR: Fix hypercall on LE guest KVM: PPC: BOOK3S: Remove open coded make_dsisr in alignment handler KVM: PPC: BOOK3S: Always use the saved DAR value PPC: KVM: Make NX bit available with magic page KVM: PPC: Disable NX for old magic page using guests KVM: PPC: BOOK3S: HV: Add mixed page-size support for guest ...
2014-04-30ARM/ARM64: KVM: Advertise KVM_CAP_ARM_PSCI_0_2 to user spaceAnup Patel1-0/+1
We have PSCI v0.2 emulation available in KVM ARM/ARM64 hence advertise this to user space (i.e. QEMU or KVMTOOL) via KVM_CHECK_EXTENSION ioctl. Signed-off-by: Anup Patel <anup.patel@linaro.org> Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-04-30ARM/ARM64: KVM: Emulate PSCI v0.2 CPU_SUSPENDAnup Patel1-4/+24
This patch adds emulation of PSCI v0.2 CPU_SUSPEND function call for KVM ARM/ARM64. This is a CPU-level function call which can suspend current CPU or current CPU cluster. We don't have VCPU clusters in KVM so we only suspend the current VCPU. The CPU_SUSPEND emulation is not tested much because currently there is no CPUIDLE driver in Linux kernel that uses PSCI CPU_SUSPEND. The PSCI CPU_SUSPEND implementation in ARM64 kernel was tested using a Simple CPUIDLE driver which is not published due to unstable DT-bindings for PSCI. (For more info, http://lwn.net/Articles/574950/) For simplicity, we implement CPU_SUSPEND emulation similar to WFI (Wait-for-interrupt) emulation and we also treat power-down request to be same as stand-by request. This is consistent with section 5.4.1 and section 5.4.2 of PSCI v0.2 specification. Signed-off-by: Anup Patel <anup.patel@linaro.org> Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-04-30ARM/ARM64: KVM: Fix CPU_ON emulation for PSCI v0.2Anup Patel1-1/+14
As-per PSCI v0.2, the source CPU provides physical address of "entry point" and "context id" for starting a target CPU. Also, if target CPU is already running then we should return ALREADY_ON. Current emulation of CPU_ON function does not consider physical address of "context id" and returns INVALID_PARAMETERS if target CPU is already running. This patch updates kvm_psci_vcpu_on() such that it works for both PSCI v0.1 and PSCI v0.2. Signed-off-by: Anup Patel <anup.patel@linaro.org> Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-04-30ARM/ARM64: KVM: Emulate PSCI v0.2 MIGRATE_INFO_TYPE and related functionsAnup Patel1-5/+16
This patch adds emulation of PSCI v0.2 MIGRATE, MIGRATE_INFO_TYPE, and MIGRATE_INFO_UP_CPU function calls for KVM ARM/ARM64. KVM ARM/ARM64 being a hypervisor (and not a Trusted OS), we cannot provide this functions hence we emulate these functions in following way: 1. MIGRATE - Returns "Not Supported" 2. MIGRATE_INFO_TYPE - Return 2 i.e. Trusted OS is not present 3. MIGRATE_INFO_UP_CPU - Returns "Not Supported" Signed-off-by: Anup Patel <anup.patel@linaro.org> Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-04-30ARM/ARM64: KVM: Emulate PSCI v0.2 AFFINITY_INFOAnup Patel1-2/+50
This patch adds emulation of PSCI v0.2 AFFINITY_INFO function call for KVM ARM/ARM64. This is a VCPU-level function call which will be used to determine current state of given affinity level. Signed-off-by: Anup Patel <anup.patel@linaro.org> Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-04-30ARM/ARM64: KVM: Emulate PSCI v0.2 SYSTEM_OFF and SYSTEM_RESETAnup Patel1-3/+43
The PSCI v0.2 SYSTEM_OFF and SYSTEM_RESET functions are system-level functions hence cannot be fully emulated by in-kernel PSCI emulation code. To tackle this, we forward PSCI v0.2 SYSTEM_OFF and SYSTEM_RESET function calls from vcpu to user space (i.e. QEMU or KVMTOOL) via kvm_run structure using KVM_EXIT_SYSTEM_EVENT exit reasons. Signed-off-by: Anup Patel <anup.patel@linaro.org> Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-04-30ARM/ARM64: KVM: Make kvm_psci_call() return convention more flexibleAnup Patel2-15/+23
Currently, the kvm_psci_call() returns 'true' or 'false' based on whether the PSCI function call was handled successfully or not. This does not help us emulate system-level PSCI functions where the actual emulation work will be done by user space (QEMU or KVMTOOL). Examples of such system-level PSCI functions are: PSCI v0.2 SYSTEM_OFF and SYSTEM_RESET. This patch updates kvm_psci_call() to return three types of values: 1) > 0 (success) 2) = 0 (success but exit to user space) 3) < 0 (errors) Signed-off-by: Anup Patel <anup.patel@linaro.org> Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-04-30ARM/ARM64: KVM: Add base for PSCI v0.2 emulationAnup Patel1-16/+77
Currently, the in-kernel PSCI emulation provides PSCI v0.1 interface to VCPUs. This patch extends current in-kernel PSCI emulation to provide PSCI v0.2 interface to VCPUs. By default, ARM/ARM64 KVM will always provide PSCI v0.1 interface for keeping the ABI backward-compatible. To select PSCI v0.2 interface for VCPUs, the user space (i.e. QEMU or KVMTOOL) will have to set KVM_ARM_VCPU_PSCI_0_2 feature when doing VCPU init using KVM_ARM_VCPU_INIT ioctl. Signed-off-by: Anup Patel <anup.patel@linaro.org> Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-04-28arm: KVM: fix possible misalignment of PGDs and bounce pageMark Salter1-6/+9
The kvm/mmu code shared by arm and arm64 uses kalloc() to allocate a bounce page (if hypervisor init code crosses page boundary) and hypervisor PGDs. The problem is that kalloc() does not guarantee the proper alignment. In the case of the bounce page, the page sized buffer allocated may also cross a page boundary negating the purpose and leading to a hang during kvm initialization. Likewise the PGDs allocated may not meet the minimum alignment requirements of the underlying MMU. This patch uses __get_free_page() to guarantee the worst case alignment needs of the bounce page and PGDs on both arm and arm64. Cc: <stable@vger.kernel.org> # 3.10+ Signed-off-by: Mark Salter <msalter@redhat.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-04-26ARM: KVM: disable KVM in Kconfig on big-endian systemsWill Deacon1-1/+1
KVM currently crashes and burns on big-endian hosts, so don't allow it to be selected until we've got that fixed. Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-04-08Merge tag 'cpu-hotplug-3.15-rc1' of ↵Linus Torvalds1-1/+6
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull CPU hotplug notifiers registration fixes from Rafael Wysocki: "The purpose of this single series of commits from Srivatsa S Bhat (with a small piece from Gautham R Shenoy) touching multiple subsystems that use CPU hotplug notifiers is to provide a way to register them that will not lead to deadlocks with CPU online/offline operations as described in the changelog of commit 93ae4f978ca7f ("CPU hotplug: Provide lockless versions of callback registration functions"). The first three commits in the series introduce the API and document it and the rest simply goes through the users of CPU hotplug notifiers and converts them to using the new method" * tag 'cpu-hotplug-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (52 commits) net/iucv/iucv.c: Fix CPU hotplug callback registration net/core/flow.c: Fix CPU hotplug callback registration mm, zswap: Fix CPU hotplug callback registration mm, vmstat: Fix CPU hotplug callback registration profile: Fix CPU hotplug callback registration trace, ring-buffer: Fix CPU hotplug callback registration xen, balloon: Fix CPU hotplug callback registration hwmon, via-cputemp: Fix CPU hotplug callback registration hwmon, coretemp: Fix CPU hotplug callback registration thermal, x86-pkg-temp: Fix CPU hotplug callback registration octeon, watchdog: Fix CPU hotplug callback registration oprofile, nmi-timer: Fix CPU hotplug callback registration intel-idle: Fix CPU hotplug callback registration clocksource, dummy-timer: Fix CPU hotplug callback registration drivers/base/topology.c: Fix CPU hotplug callback registration acpi-cpufreq: Fix CPU hotplug callback registration zsmalloc: Fix CPU hotplug callback registration scsi, fcoe: Fix CPU hotplug callback registration scsi, bnx2fc: Fix CPU hotplug callback registration scsi, bnx2i: Fix CPU hotplug callback registration ...
2014-03-20arm, kvm: Fix CPU hotplug callback registrationSrivatsa S. Bhat1-1/+6
On 03/15/2014 12:40 AM, Christoffer Dall wrote: > On Fri, Mar 14, 2014 at 11:13:29AM +0530, Srivatsa S. Bhat wrote: >> On 03/13/2014 04:51 AM, Christoffer Dall wrote: >>> On Tue, Mar 11, 2014 at 02:05:38AM +0530, Srivatsa S. Bhat wrote: >>>> Subsystems that want to register CPU hotplug callbacks, as well as perform >>>> initialization for the CPUs that are already online, often do it as shown >>>> below: >>>> [...] >>> Just so we're clear, the existing code was simply racy as not prone to >>> deadlocks, right? >>> >>> This makes it clear that the test above for compatible CPUs can be quite >>> easily evaded by using CPU hotplug, but we don't really have a good >>> solution for handling that yet... Hmmm, grumble grumble, I guess if you >>> hotplug unsupported CPUs on a KVM/ARM system for now, stuff will break. >>> >> >> In this particular case, there was no deadlock possibility, rather the >> existing code had insufficient synchronization against CPU hotplug. >> >> init_hyp_mode() would invoke cpu_init_hyp_mode() on currently online CPUs >> using on_each_cpu(). If a CPU came online after this point and before calling >> register_cpu_notifier(), that CPU would remain uninitialized because this >> subsystem would miss the hot-online event. This patch fixes this bug and >> also uses the new synchronization method (instead of get/put_online_cpus()) >> to ensure that we don't deadlock with CPU hotplug. >> > > Yes, that was my conclusion as well. Thanks for clarifying. (It could > be noted in the commit message as well if you should feel so inclined). > Please find the patch with updated changelog (and your Ack) below. (No changes in code). From: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Subject: [PATCH] arm, kvm: Fix CPU hotplug callback registration Subsystems that want to register CPU hotplug callbacks, as well as perform initialization for the CPUs that are already online, often do it as shown below: get_online_cpus(); for_each_online_cpu(cpu) init_cpu(cpu); register_cpu_notifier(&foobar_cpu_notifier); put_online_cpus(); This is wrong, since it is prone to ABBA deadlocks involving the cpu_add_remove_lock and the cpu_hotplug.lock (when running concurrently with CPU hotplug operations). Instead, the correct and race-free way of performing the callback registration is: cpu_notifier_register_begin(); for_each_online_cpu(cpu) init_cpu(cpu); /* Note the use of the double underscored version of the API */ __register_cpu_notifier(&foobar_cpu_notifier); cpu_notifier_register_done(); In the existing arm kvm code, there is no synchronization with CPU hotplug to avoid missing the hotplug events that might occur after invoking init_hyp_mode() and before calling register_cpu_notifier(). Fix this bug and also use the new synchronization method (instead of get/put_online_cpus()) to ensure that we don't deadlock with CPU hotplug. Cc: Gleb Natapov <gleb@kernel.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Ingo Molnar <mingo@kernel.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-03-03ARM: KVM: fix warning in mmu.cMarc Zyngier1-1/+2
Compiling with THP enabled leads to the following warning: arch/arm/kvm/mmu.c: In function ‘unmap_range’: arch/arm/kvm/mmu.c:177:39: warning: ‘pte’ may be used uninitialized in this function [-Wmaybe-uninitialized] if (kvm_pmd_huge(*pmd) || page_empty(pte)) { ^ Code inspection reveals that these two cases are mutually exclusive, so GCC is a bit overzealous here. Silence it anyway by initializing pte to NULL and testing it later on. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-03-03ARM: KVM: trap VM system registers until MMU and caches are ONMarc Zyngier4-18/+64
In order to be able to detect the point where the guest enables its MMU and caches, trap all the VM related system registers. Once we see the guest enabling both the MMU and the caches, we can go back to a saner mode of operation, which is to leave these registers in complete control of the guest. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-03-03ARM: KVM: add world-switch for AMAIR{0,1}Marc Zyngier2-2/+16
HCR.TVM traps (among other things) accesses to AMAIR0 and AMAIR1. In order to minimise the amount of surprise a guest could generate by trying to access these registers with caches off, add them to the list of registers we switch/handle. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com>
2014-03-03ARM: KVM: introduce per-vcpu HYP Configuration RegisterMarc Zyngier2-6/+4
So far, KVM/ARM used a fixed HCR configuration per guest, except for the VI/VF/VA bits to control the interrupt in absence of VGIC. With the upcoming need to dynamically reconfigure trapping, it becomes necessary to allow the HCR to be changed on a per-vcpu basis. The fix here is to mimic what KVM/arm64 already does: a per vcpu HCR field, initialized at setup time. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com>
2014-03-03ARM: KVM: fix ordering of 64bit coprocessor accessesMarc Zyngier1-3/+3
Commit 240e99cbd00a (ARM: KVM: Fix 64-bit coprocessor handling) added an ordering dependency for the 64bit registers. The order described is: CRn, CRm, Op1, Op2, 64bit-first. Unfortunately, the implementation is: CRn, 64bit-first, CRm... Move the 64bit test to be last in order to match the documentation. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com>
2014-03-03ARM: KVM: fix handling of trapped 64bit coprocessor accessesMarc Zyngier2-4/+4
Commit 240e99cbd00a (ARM: KVM: Fix 64-bit coprocessor handling) changed the way we match the 64bit coprocessor access from user space, but didn't update the trap handler for the same set of registers. The effect is that a trapped 64bit access is never matched, leading to a fault being injected into the guest. This went unnoticed as we didn't really trap any 64bit register so far. Placing the CRm field of the access into the CRn field of the matching structure fixes the problem. Also update the debug feature to emit the expected string in case of failing match. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com>
2014-03-03arm64: KVM: flush VM pages before letting the guest enable cachesMarc Zyngier1-0/+93
When the guest runs with caches disabled (like in an early boot sequence, for example), all the writes are diectly going to RAM, bypassing the caches altogether. Once the MMU and caches are enabled, whatever sits in the cache becomes suddenly visible, which isn't what the guest expects. A way to avoid this potential disaster is to invalidate the cache when the MMU is being turned on. For this, we hook into the SCTLR_EL1 trapping code, and scan the stage-2 page tables, invalidating the pages/sections that have already been mapped in. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-03-03ARM: KVM: introduce kvm_p*d_addr_endMarc Zyngier1-5/+5
The use of p*d_addr_end with stage-2 translation is slightly dodgy, as the IPA is 40bits, while all the p*d_addr_end helpers are taking an unsigned long (arm64 is fine with that as unligned long is 64bit). The fix is to introduce 64bit clean versions of the same helpers, and use them in the stage-2 page table code. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-03-03arm64: KVM: force cache clean on page fault when caches are offMarc Zyngier1-2/+2
In order for the guest with caches off to observe data written contained in a given page, we need to make sure that page is committed to memory, and not just hanging in the cache (as guest accesses are completely bypassing the cache until it decides to enable it). For this purpose, hook into the coherent_icache_guest_page function and flush the region if the guest SCTLR_EL1 register doesn't show the MMU and caches as being enabled. The function also get renamed to coherent_cache_guest_page. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-02-27arm/arm64: KVM: detect CPU reset on CPU_PM_EXITMarc Zyngier2-2/+12
Commit 1fcf7ce0c602 (arm: kvm: implement CPU PM notifier) added support for CPU power-management, using a cpu_notifier to re-init KVM on a CPU that entered CPU idle. The code assumed that a CPU entering idle would actually be powered off, loosing its state entierely, and would then need to be reinitialized. It turns out that this is not always the case, and some HW performs CPU PM without actually killing the core. In this case, we try to reinitialize KVM while it is still live. It ends up badly, as reported by Andre Przywara (using a Calxeda Midway): [ 3.663897] Kernel panic - not syncing: unexpected prefetch abort in Hyp mode at: 0x685760 [ 3.663897] unexpected data abort in Hyp mode at: 0xc067d150 [ 3.663897] unexpected HVC/SVC trap in Hyp mode at: 0xc0901dd0 The trick here is to detect if we've been through a full re-init or not by looking at HVBAR (VBAR_EL2 on arm64). This involves implementing the backend for __hyp_get_vectors in the main KVM HYP code (rather small), and checking the return value against the default one when the CPU notifier is called on CPU_PM_EXIT. Reported-by: Andre Przywara <osp@andrep.de> Tested-by: Andre Przywara <osp@andrep.de> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Rob Herring <rob.herring@linaro.org> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-01-23Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds5-34/+144
Pull KVM updates from Paolo Bonzini: "First round of KVM updates for 3.14; PPC parts will come next week. Nothing major here, just bugfixes all over the place. The most interesting part is the ARM guys' virtualized interrupt controller overhaul, which lets userspace get/set the state and thus enables migration of ARM VMs" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (67 commits) kvm: make KVM_MMU_AUDIT help text more readable KVM: s390: Fix memory access error detection KVM: nVMX: Update guest activity state field on L2 exits KVM: nVMX: Fix nested_run_pending on activity state HLT KVM: nVMX: Clean up handling of VMX-related MSRs KVM: nVMX: Add tracepoints for nested_vmexit and nested_vmexit_inject KVM: nVMX: Pass vmexit parameters to nested_vmx_vmexit KVM: nVMX: Leave VMX mode on clearing of feature control MSR KVM: VMX: Fix DR6 update on #DB exception KVM: SVM: Fix reading of DR6 KVM: x86: Sync DR7 on KVM_SET_DEBUGREGS add support for Hyper-V reference time counter KVM: remove useless write to vcpu->hv_clock.tsc_timestamp KVM: x86: fix tsc catchup issue with tsc scaling KVM: x86: limit PIT timer frequency KVM: x86: handle invalid root_hpa everywhere kvm: Provide kvm_vcpu_eligible_for_directed_yield() stub kvm: vfio: silence GCC warning KVM: ARM: Remove duplicate include arm/arm64: KVM: relax the requirements of VMA alignment for THP ...
2014-01-15Merge tag 'kvm-arm-for-3.14' of ↵Paolo Bonzini4-29/+38
git://git.linaro.org/people/christoffer.dall/linux-kvm-arm into kvm-queue
2014-01-09KVM: ARM: Remove duplicate includeSachin Kamat1-2/+0
trace.h was included twice. Remove duplicate inclusion. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-01-09arm/arm64: KVM: relax the requirements of VMA alignment for THPMarc Zyngier1-7/+9
The THP code in KVM/ARM is a bit restrictive in not allowing a THP to be used if the VMA is not 2MB aligned. Actually, it is not so much the VMA that matters, but the associated memslot: A process can perfectly mmap a region with no particular alignment restriction, and then pass a 2MB aligned address to KVM. In this case, KVM will only use this 2MB aligned region, and will ignore the range between vma->vm_start and memslot->userspace_addr. It can also choose to place this memslot at whatever alignment it wants in the IPA space. In the end, what matters is the relative alignment of the user space and IPA mappings with respect to a 2M page. They absolutely must be the same if you want to use THP. Cc: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2013-12-21arm/arm64: kvm: Set vcpu->cpu to -1 on vcpu_putChristoffer Dall1-0/+7
The arch-generic KVM code expects the cpu field of a vcpu to be -1 if the vcpu is no longer assigned to a cpu. This is used for the optimized make_all_cpus_request path and will be used by the vgic code to check that no vcpus are running. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2013-12-21KVM: arm-vgic: Set base addr through device APIChristoffer Dall1-1/+1
Support setting the distributor and cpu interface base addresses in the VM physical address space through the KVM_{SET,GET}_DEVICE_ATTR API in addition to the ARM specific API. This has the added benefit of being able to share more code in user space and do things in a uniform manner. Also deprecate the older API at the same time, but backwards compatibility will be maintained. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2013-12-21KVM: arm-vgic: Support KVM_CREATE_DEVICE for VGICChristoffer Dall1-0/+1
Support creating the ARM VGIC device through the KVM_CREATE_DEVICE ioctl, which can then later be leveraged to use the KVM_{GET/SET}_DEVICE_ATTR, which is useful both for setting addresses in a more generic API than the ARM-specific one and is useful for save/restore of VGIC state. Adds KVM_CAP_DEVICE_CTRL to ARM capabilities. Note that we change the check for creating a VGIC from bailing out if any VCPUs were created, to bailing out if any VCPUs were ever run. This is an important distinction that shouldn't break anything, but allows creating the VGIC after the VCPUs have been created. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2013-12-21ARM: KVM: Allow creating the VGIC after VCPUsChristoffer Dall1-3/+4
Rework the VGIC initialization slightly to allow initialization of the vgic cpu-specific state even if the irqchip (the VGIC) hasn't been created by user space yet. This is safe, because the vgic data structures are already allocated when the CPU is allocated if VGIC support is compiled into the kernel. Further, the init process does not depend on any other information and the sacrifice is a slight performance degradation for creating VMs in the no-VGIC case. The reason is that the new device control API doesn't mandate creating the VGIC before creating the VCPU and it is unreasonable to require user space to create the VGIC before creating the VCPUs. At the same time move the irqchip_in_kernel check out of kvm_vcpu_first_run_init and into the init function to make the per-vcpu and global init functions symmetric and add comments on the exported functions making it a bit easier to understand the init flow by only looking at vgic.c. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2013-12-21ARM/KVM: save and restore generic timer registersAndre Przywara1-1/+91
For migration to work we need to save (and later restore) the state of each core's virtual generic timer. Since this is per VCPU, we can use the [gs]et_one_reg ioctl and export the three needed registers (control, counter, compare value). Though they live in cp15 space, we don't use the existing list, since they need special accessor functions and the arch timer is optional. Acked-by: Marc Zynger <marc.zyngier@arm.com> Signed-off-by: Andre Przywara <andre.przywara@linaro.org> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2013-12-21arm/arm64: KVM: arch_timer: Initialize cntvoff at kvm_initChristoffer Dall1-0/+2
Initialize the cntvoff at kvm_init_vm time, not before running the VCPUs at the first time because that will overwrite any potentially restored values from user space. Cc: Andre Przywara <andre.przywara@linaro.org> Acked-by: Marc Zynger <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2013-12-21arm: KVM: Don't return PSCI_INVAL if waitqueue is inactiveChristoffer Dall2-16/+25
The current KVM implementation of PSCI returns INVALID_PARAMETERS if the waitqueue for the corresponding CPU is not active. This does not seem correct, since KVM should not care what the specific thread is doing, for example, user space may not have called KVM_RUN on this VCPU yet or the thread may be busy looping to user space because it received a signal; this is really up to the user space implementation. Instead we should check specifically that the CPU is marked as being turned off, regardless of the VCPU thread state, and if it is, we shall simply clear the pause flag on the CPU and wake up the thread if it happens to be blocked for us. Further, the implementation seems to be racy when executing multiple VCPU threads. There really isn't a reasonable user space programming scheme to ensure all secondary CPUs have reached kvm_vcpu_first_run_init before turning on the boot CPU. Therefore, set the pause flag on the vcpu at VCPU init time (which can reasonably be expected to be completed for all CPUs by user space before running any VCPUs) and clear both this flag and the feature (in case the feature can somehow get set again in the future) and ping the waitqueue on turning on a VCPU using PSCI. Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-11 12:52:01 +0300