summaryrefslogtreecommitdiff
path: root/arch/arm/boot
AgeCommit message (Collapse)AuthorFilesLines
2024-04-08ARM: dts: qcom: msm8974: Add empty chosen nodeLuca Weiss1-0/+2
Add an empty /chosen node to the dtsi like is common on most other Qualcomm SoC files, so that various pieces of software expecting this node to exist don't complain. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240318-msm8974-misc2-v1-2-f71668a2b8cd@z3ntu.xyz Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-04-08ARM: dts: qcom: msm8974: Add @0 to memory node nameLuca Weiss1-1/+1
Add the @0 from reg to the node name, so that both dtc warning and dt validation failure get resolved. arch/arm/boot/dts/qcom/qcom-msm8974.dtsi:106.9-109.4: Warning (unit_address_vs_reg): /memory: node has a reg or ranges property, but no unit name [..]/arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dtb: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 0]]} from schema $id: http://devicetree.org/schemas/root-node.yaml# Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240318-msm8974-misc2-v1-1-f71668a2b8cd@z3ntu.xyz Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-04-04ARM: dts: bcm2711-rpi-4-b: Add CAM1 regulatorLaurent Pinchart1-0/+7
Add a fixed regulator to model the power supply to the camera connector. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://lore.kernel.org/r/20240402000424.4650-10-laurent.pinchart@ideasonboard.com Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
2024-04-04ARM: dts: bcm2711-rpi-cm4-io: Add RTC on I2C0Uwe Kleine-König1-0/+9
The cm4-io board comes with a PCF85063 on I2C0, connected to the GPIO44 and GPIO45 pins. Add it to the device tree. Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://lore.kernel.org/r/20240402000424.4650-9-laurent.pinchart@ideasonboard.com Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
2024-04-04ARM: dts: bcm2711-rpi: Add pinctrl-based multiplexing for I2C0Uwe Kleine-König1-0/+29
BCM2711-based Raspberry Pi boards (4B, CM4 and 400) multiplex the I2C0 controller over two sets of pins, GPIO0+1 and GPIO44+45. The former is exposed on the 40-pin header, while the latter is used for the CSI and DSI connectors. Add a pinctrl-based I2C bus multiplexer to bcm2711-rpi.dtsi to model this multiplexing. The two child buses are named i2c0_0 and i2c0_1. Note that if you modified the dts before to add devices to the i2c bus appearing on pins gpio0 + gpio1 (either directly in the dts or using an overlay), you have to put these into the i2c0_0 node introduced here now. Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://lore.kernel.org/r/20240402000424.4650-8-laurent.pinchart@ideasonboard.com Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
2024-04-04ARM: dts: bcm2835-rpi: Move duplicate firmware-clocks to bcm2835-rpi.dtsiLaurent Pinchart3-12/+5
The Raspberry Pi firmware handles clocks on all BCM2835-derived SoCs. It is currently defined identically in both bcm2711-rpi.dtsi and bcm2835-rpi-common.dtsi. Move the definitions to the common bcm2835-rpi.dtsi file. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://lore.kernel.org/r/20240402000424.4650-6-laurent.pinchart@ideasonboard.com Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
2024-04-04ARM: dts: bcm283x: Drop unneeded properties in the bcm2835-firmware nodeLaurent Pinchart1-4/+0
The firmware node contains a "dma-ranges" property to enable usage of the DMA mapping API with its child devices, along with "#address-cells" and "#size-cells" properties to support the dma-ranges. This was needed due to usage of the incorrect device to perform the DMA mapping in drivers. Now that this has been fixed, drop the properties. This effectively reverts commits be08d278eb09 ("ARM: dts: bcm283x: Add cells encoding format to firmware bus") and 55c7c0621078 ("ARM: dts: bcm283x: Fix vc4's firmware bus DMA limitations"). Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Stefan Wahren <wahrenst@gmx.net> Tested-by: Ivan T. Ivanov <iivanov@suse.de> Link: https://lore.kernel.org/r/20240326195807.15163-4-laurent.pinchart@ideasonboard.com Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
2024-04-03ARM: dts: n900: set charge current limit to 950mAArthur Demchenkov1-1/+1
The vendor kernel used 950mA as the default. The same value works fine on the mainline Linux kernel, and has been tested extensively under Maemo Leste [1] and postmarketOS, who have been using it for a number of years. [1] https://github.com/maemo-leste/n9xx-linux/commit/fbc4ce7a84e59215914a8981afe918002b191493 Signed-off-by: Arthur Demchenkov <spinal.by@gmail.com> Signed-off-by: Sicelo A. Mhlongo <absicsz@gmail.com> Message-ID: <20240228083846.2401108-2-absicsz@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2024-04-03ARM: dts: qcom: Add Sony Xperia Z3 smartphoneLuca Weiss2-0/+45
Add the dts for the Xperia Z3 smartphone which is based on Sony's shinano platform, so at the moment there's little device-specific dts to add on top of the common parts. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240314-shinano-common-v2-3-a0fce1c72c74@z3ntu.xyz Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-04-03ARM: dts: qcom: msm8974-sony-castor: Split into shinano-commonLuca Weiss2-530/+556
In preparation for adding the Sony Xperia Z3 smartphone, split the common parts into shinano-common.dtsi. No functional change intended. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Link: https://lore.kernel.org/r/20240314-shinano-common-v2-1-a0fce1c72c74@z3ntu.xyz Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-04-03ARM: dts: imx6sx-nitrogen6sx: drop incorrect cpu-dai propertyShengjiu Wang1-1/+1
drop incorrect cpu-dai property, change it to ssi-controller Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-04-03ARM: dts: imx6qdl-udoo: Enable USB hostFabio Estevam1-13/+12
Commit 8f2ca252ee1f ("ARM: dts: imx6qdl-udoo: Disable USB host to work around boot issues") disabled USB host to avoid boot hang. Properly describe the USB2514 USB hub to fix this issue. Tested on a imx6q-udoo board and verified that it boots fine and USB host functionality works. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-04-03ARM: dts: imx7s-warp: Pass OV2680 link-frequenciesFabio Estevam1-0/+1
Since commit 63b0cd30b78e ("media: ov2680: Add bus-cfg / endpoint property verification") the ov2680 no longer probes on a imx7s-warp7: ov2680 1-0036: error -EINVAL: supported link freq 330000000 not found ov2680 1-0036: probe with driver ov2680 failed with error -22 Fix it by passing the required 'link-frequencies' property as recommended by: https://www.kernel.org/doc/html/v6.9-rc1/driver-api/media/camera-sensor.html#handling-clocks Cc: stable@vger.kernel.org Fixes: 63b0cd30b78e ("media: ov2680: Add bus-cfg / endpoint property verification") Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-04-02ARM: dts: qcom: msm8916: idle-state compatible require the generic idle-stateDavid Heidelberg1-1/+1
compatible must be qcom,idle-state-spc AND arm,idle-state. Fixes: d468f825b3fd ("ARM: dts: qcom: msm8916: Add include for SMP without PSCI on ARM32") Signed-off-by: David Heidelberg <david@ixit.cz> Link: https://lore.kernel.org/r/20231202234832.155306-3-david@ixit.cz Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-04-02ARM: dts: qcom: include cpu in idle-state node namesDavid Heidelberg3-3/+3
Required for dt-schema validation. Signed-off-by: David Heidelberg <david@ixit.cz> Link: https://lore.kernel.org/r/20231202234832.155306-2-david@ixit.cz Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-04-02ARM: dts: imx7-mba7: Use 'no-mmc' propertyFabio Estevam1-1/+1
'no-emmc' is not a valid property. The original intention was to use the 'no-mmc' property. Change it accordingly to fix the following dt-schema warning: imx7s-mba7.dtb: mmc@30b40000: Unevaluated properties are not allowed ('no-emmc' was unexpected) Fixes: d430a7e0e181 ("ARM: dts: imx7-mba7: restrict usdhc interface modes") Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-04-02ARM: dts: imx7s: Add snvs-poweroff supportFabio Estevam1-0/+9
Just like other i.MX devices, i.MX7 also supports using the SNVS block to poweroff the chip. Add an entry for it. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-04-02ARM: dts: imx6qdl: Remove LCD.CONTRAST pinctrl from muxingAlexander Stein1-2/+0
GPIO4_IO20 is unused on MBA6x, unless LVDS display is attached. Remove the pinctrl for GPIO4_IO20, so it can be used otherwise. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-04-02ARM: dts: imx6qdl: mba6: Add missing vdd-supply for on-board USB hubAlexander Stein1-0/+1
This adds vdd-supply powering the USB hub. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-03-29ARM: dts: imx6ull: add seeed studio NPi dev boardParthiban Nallathambi5-0/+619
Add support for Seed Stuidos NPi i.MX6ULL SoM equipped with 512MB RAM and 8GB eMMC or 512MB NAND flash. Development board comes with either eMMC or NAND based SoM with peripheral interfaces like 2 x ethernet, 2 x USB, LCD, CSI and more. Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-03-28Merge branch 'arm32-for-6.10' onto 'v6.9-rc1'Bjorn Andersson1-51/+32
Merge the patches that was picked up for v6.10 before v6.9-rc1 became available onto v6.9-rc1 to reduce the risk for conflicts etc.
2024-03-28ARM: dts: imx: Add UNI-T UTi260B thermal camera boardSebastian Reichel2-0/+567
Add DT for the UNI-T UTi260B handheld thermal camera. Reviewed-by: Stefan Wahren <wahrenst@gmx.net> Signed-off-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-03-28ARM: dts: imx6: fix IRQ config of RC5T619Andreas Kemnade3-3/+3
Set interrupt type to level low to correctly describe the hardware and do not rely on the driver to do the right thing. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-03-28ARM: dts: imx6sl: tolino-shine2hd: fix IRQ config of touchscreenAndreas Kemnade1-1/+1
Correctly describe the interrupt as level low. Driver enforces that anyways, but do not rely on that in the devicetree. Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-03-26ARM: dts: exynos4212-tab3: limit usable memory rangeArtur Weber1-0/+6
The stock bootloader on the Samsung Galaxy Tab 3 8.0 provides an incorrect available memory range over ATAG_MEM. Limit the usable memory in the DTS to prevent it from doing so, without having to disable ATAG support. Signed-off-by: Artur Weber <aweber.kernel@gmail.com> Reviewed-by: Henrik Grimler <henrik@grimler.se> Link: https://lore.kernel.org/r/20240217-tab3-limit-usable-memory-range-v1-1-49cc9c86a5cc@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-03-26ARM: dts: renesas: rcar-gen2: Add TMU nodesGeert Uytterhoeven5-0/+291
Add device nodes for the Timer Units (TMU) on the R-Car H2 (R8A7790), M2-W (R8A7791), V2H (R8A7792), M2-N (R8A7793), and E2 (R8A7794) SoCs. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/7efbc8dbac6876f454011563edc1ae8eb50c95db.1710864964.git.geert+renesas@glider.be
2024-03-26ARM: dts: renesas: rzg1: Add TMU nodesGeert Uytterhoeven5-0/+276
Add device nodes for the Timer Units (TMU) on the RZ/G1H (R8A7742), RZ/G1M (R8A7743), RZ/G1N (R8A7744), RZ/G1E (R8A7745), and RZ/G1C (R8A77470) SoCs. Note that TMU channel 0 on RZ/G1C is not added, as its module clock is not documented. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/b09f55e0089a9824d43e89fd6bac3cbd48f40d8b.1710864964.git.geert+renesas@glider.be
2024-03-26ARM: dts: renesas: r8a73a4: Add TMU nodesGeert Uytterhoeven1-0/+37
Add device nodes for the Timer Units (TMU) on the R-Mobile APE6 SoC, and the clocks serving them. Note that TMU channels 1 and 2 are not added, as their interrupts are not wired to the interrupt controller for the AP-System Core (INTC-SYS), only to the interrupt controller for the AP-Realtime Core (INTC-RT). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/1a60832f3ba37afb4a5791f4e5db4610ab31beb3.1710864964.git.geert+renesas@glider.be
2024-03-26ARM: dts: renesas: r7s72100: Add interrupt-names to SCIF nodesLad Prabhakar1-0/+8
Add "interrupt-names" properties to SCIF nodes for clarity. This allows us to update the DT bindings to mark the "interrupt-names" property required for all SoCs which have multiple interrupts, and to validate the DTBs using dtbs_check. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20240318174345.46824-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-03-25ARM: dts: samsung: s5pv210: specify the SPI FIFO depthTudor Ambarus1-0/+2
Up to now the SPI alias was used as an index into an array defined in the SPI driver to determine the SPI FIFO depth. Drop the dependency on the SPI alias and specify the SPI FIFO depth directly into the SPI node. The SPI nodes defined in s5pv210.dtsi are not enabled in any board file. No SPI aliases are defined, thus choose the FIFO depth using common sense: index 0 of the array for spi0, and index 1 for spi1. No functional change expected. Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org> Link: https://lore.kernel.org/r/20240216140449.2564625-8-tudor.ambarus@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-03-25ARM: dts: samsung: exynos5420: specify the SPI FIFO depthTudor Ambarus1-0/+3
Up to now the SPI alias was used as an index into an array defined in the SPI driver to determine the SPI FIFO depth. Drop the dependency on the SPI alias and specify the SPI FIFO depth directly into the SPI node. exynos5420.dtsi defines the following aliases: spi0 = &spi_0; spi1 = &spi_1; spi2 = &spi_2; spi-s3c64xx.c driver defines the following fifo_lvl_mask for the "samsung,exynos4210-spi" compatible: .fifo_lvl_mask = { 0x1ff, 0x7F, 0x7F }, Thus spi0 was considered having a 256 byte FIFO depth, and spi1 and spi2 having 64 byte FIFO depth each. Update device tree with these FIFO depths. No functional change expected. Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org> Link: https://lore.kernel.org/r/20240216140449.2564625-5-tudor.ambarus@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-03-25ARM: dts: samsung: exynos5250: specify the SPI FIFO depthTudor Ambarus1-0/+3
Up to now the SPI alias was used as an index into an array defined in the SPI driver to determine the SPI FIFO depth. Drop the dependency on the SPI alias and specify the SPI FIFO depth directly into the SPI node. exynos5250.dtsi defines the following aliases: spi0 = &spi_0; spi1 = &spi_1; spi2 = &spi_2; spi-s3c64xx.c driver defines the following fifo_lvl_mask for the "samsung,exynos4210-spi" compatible: .fifo_lvl_mask = { 0x1ff, 0x7F, 0x7F }, Thus spi0 was considered having a 256 byte FIFO depth, and spi1 and spi2 having 64 byte FIFO depth each. Update device tree with these FIFO depths. No functional change expected. Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org> Link: https://lore.kernel.org/r/20240216140449.2564625-4-tudor.ambarus@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-03-25ARM: dts: samsung: exynos4: specify the SPI FIFO depthTudor Ambarus1-0/+3
Up to now the SPI alias was used as an index into an array defined in the SPI driver to determine the SPI FIFO depth. Drop the dependency on the SPI alias and specify the SPI FIFO depth directly into the SPI node. exynos4.dtsi defines the following SPI aliases: spi0 = &spi_0; spi1 = &spi_1; spi2 = &spi_2; spi-s3c64xx.c driver defines the following fifo_lvl_mask for the "samsung,exynos4210-spi" compatible: .fifo_lvl_mask = { 0x1ff, 0x7F, 0x7F }, Thus spi0 was considered having a 256 byte FIFO depth, and spi1 and spi2 having 64 byte FIFO depth each. Update device tree with these FIFO depths. No functional change expected. Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org> Link: https://lore.kernel.org/r/20240216140449.2564625-3-tudor.ambarus@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-03-25ARM: dts: samsung: exynos3250: specify the SPI FIFO depthTudor Ambarus1-0/+2
Up to now the SPI alias was used as an index into an array defined in the SPI driver to determine the SPI FIFO depth. Drop the dependency on the SPI alias and specify the SPI FIFO depth directly into the SPI node. exynos3250.dtsi defines the following aliases: spi0 = &spi_0; spi1 = &spi_1; spi-s3c64xx.c driver defines the following fifo_lvl_mask for the "samsung,exynos4210-spi" compatible: .fifo_lvl_mask = { 0x1ff, 0x7F, 0x7F }, Thus spi0 was considered having a 256 byte FIFO depth, and spi1 a 64 byte FIFO depth. Update device tree with these FIFO depths. No functional change expected. Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org> Link: https://lore.kernel.org/r/20240216140449.2564625-2-tudor.ambarus@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-03-25ARM: dts: samsung: s5pv210: correct onenand size-cellsKrzysztof Kozlowski1-1/+1
Children of NAND controllers have only chip select, so address without the size. Correct size-cells as reported by dtbs_check: s5pv210-galaxys.dtb: onenand@b0600000: #size-cells:0:0: 0 was expected Link: https://lore.kernel.org/r/20240313191148.21792-2-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-03-25ARM: dts: samsung: s5pv210: align onenand node name with bindingsKrzysztof Kozlowski1-1/+1
Bindings expect NAND controllers to match certain pattern: s5pv210-fascinate4g.dtb: onenand@b0600000: $nodename:0: 'onenand@b0600000' does not match '^nand-controller(@.*)?' Link: https://lore.kernel.org/r/20240313191148.21792-1-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-03-25ARM: dts: samsung: exynos5800-peach-pi: switch to undeprecated DP HPD GPIOsKrzysztof Kozlowski1-1/+1
'samsung,hpd-gpio' property is deprecated and uses also deprecated 'gpio' suffix which is not matched by dtbs_check: exynos5800-peach-pi.dtb: dp-controller@145b0000: 'samsung,hpd-gpio' does not match any of the regexes: 'pinctrl-[0-9]+' Switch to hpd-gpios property. Link: https://lore.kernel.org/r/20240313183011.14253-1-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-03-25ARM: dts: samsung: smdk4412: align keypad node names with dtschemaKrzysztof Kozlowski1-5/+5
DT schema expects certain node names, as pointed out but dtbs_check: exynos4412-smdk4412.dtb: keypad@100a0000: 'key-A', 'key-B', 'key-C', 'key-D', 'key-E' do not match any of the regexes: '^key-[0-9a-z]+$', 'pinctrl-[0-9]+' Link: https://lore.kernel.org/r/20240312183105.715735-4-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-03-25ARM: dts: samsung: smdk4412: fix keypad no-autorepeatKrzysztof Kozlowski1-1/+1
Although the Samsung SoC keypad binding defined linux,keypad-no-autorepeat property, Linux driver never implemented it and always used linux,input-no-autorepeat. Correct the DTS to use property actually implemented. This also fixes dtbs_check errors like: exynos4412-smdk4412.dtb: keypad@100a0000: 'key-A', 'key-B', 'key-C', 'key-D', 'key-E', 'linux,keypad-no-autorepeat' do not match any of the regexes: '^key-[0-9a-z]+$', 'pinctrl-[0-9]+' Cc: <stable@vger.kernel.org> Fixes: c9b92dd70107 ("ARM: dts: Add keypad entries to SMDK4412") Link: https://lore.kernel.org/r/20240312183105.715735-3-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-03-25ARM: dts: samsung: exynos4412-origen: fix keypad no-autorepeatKrzysztof Kozlowski1-1/+1
Although the Samsung SoC keypad binding defined linux,keypad-no-autorepeat property, Linux driver never implemented it and always used linux,input-no-autorepeat. Correct the DTS to use property actually implemented. This also fixes dtbs_check errors like: exynos4412-origen.dtb: keypad@100a0000: 'linux,keypad-no-autorepeat' does not match any of the regexes: '^key-[0-9a-z]+$', 'pinctrl-[0-9]+' Cc: <stable@vger.kernel.org> Fixes: bd08f6277e44 ("ARM: dts: Add keypad entries to Exynos4412 based Origen") Link: https://lore.kernel.org/r/20240312183105.715735-2-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-03-25ARM: dts: samsung: smdkv310: fix keypad no-autorepeatKrzysztof Kozlowski1-1/+1
Although the Samsung SoC keypad binding defined linux,keypad-no-autorepeat property, Linux driver never implemented it and always used linux,input-no-autorepeat. Correct the DTS to use property actually implemented. This also fixes dtbs_check errors like: exynos4210-smdkv310.dtb: keypad@100a0000: 'linux,keypad-no-autorepeat' does not match any of the regexes: '^key-[0-9a-z]+$', 'pinctrl-[0-9]+' Cc: <stable@vger.kernel.org> Fixes: 0561ceabd0f1 ("ARM: dts: Add intial dts file for EXYNOS4210 SoC, SMDKV310 and ORIGEN") Link: https://lore.kernel.org/r/20240312183105.715735-1-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-03-19Merge tag 'soc-late-6.9' of ↵Linus Torvalds8-368/+418
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull more ARM SoC updates from Arnd Bergmann: "These are changes that for some reason ended up not making it into the first four branches but that should still make it into 6.9: - A rework of the omap clock support that touches both drivers and device tree files - The reset controller branch changes that had a dependency on late bugfixes. Merging them here avoids a backmerge of 6.8-rc5 into the drivers branch - The RISC-V/starfive, RISC-V/microchip and ARM/Broadcom devicetree changes that got delayed and needed some extra time in linux-next for wider testing" * tag 'soc-late-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (31 commits) soc: fsl: dpio: fix kcalloc() argument order bus: ts-nbus: Improve error reporting bus: ts-nbus: Convert to atomic pwm API riscv: dts: starfive: jh7110: Add camera subsystem nodes ARM: bcm: stop selecing CONFIG_TICK_ONESHOT ARM: dts: omap3: Update clksel clocks to use reg instead of ti,bit-shift ARM: dts: am3: Update clksel clocks to use reg instead of ti,bit-shift clk: ti: Improve clksel clock bit parsing for reg property clk: ti: Handle possible address in the node name dt-bindings: pwm: opencores: Add compatible for StarFive JH8100 dt-bindings: riscv: cpus: reg matches hart ID reset: Instantiate reset GPIO controller for shared reset-gpios reset: gpio: Add GPIO-based reset controller cpufreq: do not open-code of_phandle_args_equal() of: Add of_phandle_args_equal() helper reset: simple: add support for Sophgo SG2042 dt-bindings: reset: sophgo: support SG2042 riscv: dts: microchip: add specific compatible for mpfs pdma riscv: dts: microchip: add missing CAN bus clocks ARM: brcmstb: Add debug UART entry for 74165 ...
2024-03-18ARM: dts: qcom: msm8974pro-castor: Rename wifi node nameLuca Weiss1-1/+1
Give the wifi node a generic node name 'wifi'. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240306-castor-changes-v1-5-2286eaf85fff@z3ntu.xyz Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-03-18ARM: dts: qcom: msm8974pro-castor: Add debounce-interval for keysLuca Weiss1-0/+2
Set the debounce-interval for the GPIO keys. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240306-castor-changes-v1-4-2286eaf85fff@z3ntu.xyz Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-03-18ARM: dts: qcom: msm8974pro-castor: Remove camera button definitionsLuca Weiss1-12/+0
>From what I can tell, the camera buttons are not part of Z2 Tablet hardware even though other devices based on 'shinano' do have them. Fixes: ab80661883de ("ARM: dts: qcom: msm8974: Add Sony Xperia Z2 Tablet") Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240306-castor-changes-v1-3-2286eaf85fff@z3ntu.xyz Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-03-18ARM: dts: qcom: msm8974pro-castor: Add mmc aliasesLuca Weiss1-0/+2
Add the mmc0 & mmc1 aliases to make sure internal storage always becomes /dev/mmcblk0 and SD card becomes /dev/mmcblk1 Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240306-castor-changes-v1-2-2286eaf85fff@z3ntu.xyz Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-03-18ARM: dts: qcom: msm8974pro-castor: Clean up formattingLuca Weiss1-38/+27
Clean up some easy things do prepare the dts for further changes. * Move pinctrl-names below pinctrl-* * Move status as last property * Remove default linux,input-type value Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240306-castor-changes-v1-1-2286eaf85fff@z3ntu.xyz Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-03-15Merge tag 'mtd/for-6.9' of ↵Linus Torvalds17-8/+191
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD updates from Miquel Raynal: "MTD: - The Carillo Ranch driver has been removed - Top level mtd bindings have received a couple of improvements (references, selects) - The ssfdc driver received few minor adjustments - The usual load of misc/small improvements and fixes Raw NAND: - The main series brought is an update of the Broadcom support to support all BCMBCA SoCs and their specificity (ECC, write protection, configuration straps), plus a few misc fixes and changes in the main driver. Device tree updates are also part of this PR, initially because of a misunderstanding on my side. - The STM32_FMC2 controller driver is also upgraded to properly support MP1 and MP25 SoCs. - A new compatible is added for an Atmel flavor. - Among all these feature changes, there is as well a load of continuous read related fixes, avoiding more corner conditions and clarifying the logic. Finally a few miscellaneous fixes are made to the core, the lpx32xx_mlc, fsl_lbc, Meson and Atmel controller driver, as well as final one in the Hynix vendor driver. SPI-NAND: - The ESMT support has been extended to match 5 bytes ID to avoid collisions. Winbond support on its side receives support for W25N04KV chips. SPI NOR: - SPI NOR gets the non uniform erase code cleaned. We stopped using bitmasks for erase types and flags, and instead introduced dedicated members. We then passed the SPI NOR erase map to MTD. Users can now determine the erase regions and make informed decisions on partitions size. - An optional interrupt property is now described in the bindings" * tag 'mtd/for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (50 commits) mtd: rawnand: Ensure continuous reads are well disabled mtd: rawnand: Constrain even more when continuous reads are enabled mtd: rawnand: brcmnand: Add support for getting ecc setting from strap mtd: rawnand: brcmnand: fix sparse warnings mtd: nand: raw: atmel: Fix comment in timings preparation mtd: rawnand: Ensure all continuous terms are always in sync mtd: rawnand: Add a helper for calculating a page index mtd: rawnand: Fix and simplify again the continuous read derivations mtd: rawnand: hynix: remove @nand_technology kernel-doc description dt-bindings: atmel-nand: add microchip,sam9x7-pmecc mtd: rawnand: brcmnand: Support write protection setting from dts mtd: rawnand: brcmnand: Add BCMBCA read data bus interface mtd: rawnand: brcmnand: Rename bcm63138 nand driver arm64: dts: broadcom: bcmbca: Update router boards arm64: dts: broadcom: bcmbca: Add NAND controller node ARM: dts: broadcom: bcmbca: Add NAND controller node mtd: spi-nor: core: correct type of i mtd: spi-nor: core: set mtd->eraseregions for non-uniform erase map mtd: spi-nor: core: get rid of SNOR_OVERLAID_REGION flag mtd: spi-nor: core: get rid of SNOR_LAST_REGION flag ...
2024-03-15ARM: dts: broadcom: bcmbca: Add NAND controller nodeWilliam Zhang17-8/+191
Add support for Broadcom STB NAND controller in BCMBCA ARMv7 chip dts files. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: David Regan <dregan@broadcom.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/linux-mtd/20240223034758.13753-8-william.zhang@broadcom.com
2024-03-13Merge tag 'hardening-v6.9-rc1' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull hardening updates from Kees Cook: "As is pretty normal for this tree, there are changes all over the place, especially for small fixes, selftest improvements, and improved macro usability. Some header changes ended up landing via this tree as they depended on the string header cleanups. Also, a notable set of changes is the work for the reintroduction of the UBSAN signed integer overflow sanitizer so that we can continue to make improvements on the compiler side to make this sanitizer a more viable future security hardening option. Summary: - string.h and related header cleanups (Tanzir Hasan, Andy Shevchenko) - VMCI memcpy() usage and struct_size() cleanups (Vasiliy Kovalev, Harshit Mogalapalli) - selftests/powerpc: Fix load_unaligned_zeropad build failure (Michael Ellerman) - hardened Kconfig fragment updates (Marco Elver, Lukas Bulwahn) - Handle tail call optimization better in LKDTM (Douglas Anderson) - Use long form types in overflow.h (Andy Shevchenko) - Add flags param to string_get_size() (Andy Shevchenko) - Add Coccinelle script for potential struct_size() use (Jacob Keller) - Fix objtool corner case under KCFI (Josh Poimboeuf) - Drop 13 year old backward compat CAP_SYS_ADMIN check (Jingzi Meng) - Add str_plural() helper (Michal Wajdeczko, Kees Cook) - Ignore relocations in .notes section - Add comments to explain how __is_constexpr() works - Fix m68k stack alignment expectations in stackinit Kunit test - Convert string selftests to KUnit - Add KUnit tests for fortified string functions - Improve reporting during fortified string warnings - Allow non-type arg to type_max() and type_min() - Allow strscpy() to be called with only 2 arguments - Add binary mode to leaking_addresses scanner - Various small cleanups to leaking_addresses scanner - Adding wrapping_*() arithmetic helper - Annotate initial signed integer wrap-around in refcount_t - Add explicit UBSAN section to MAINTAINERS - Fix UBSAN self-test warnings - Simplify UBSAN build via removal of CONFIG_UBSAN_SANITIZE_ALL - Reintroduce UBSAN's signed overflow sanitizer" * tag 'hardening-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (51 commits) selftests/powerpc: Fix load_unaligned_zeropad build failure string: Convert helpers selftest to KUnit string: Convert selftest to KUnit sh: Fix build with CONFIG_UBSAN=y compiler.h: Explain how __is_constexpr() works overflow: Allow non-type arg to type_max() and type_min() VMCI: Fix possible memcpy() run-time warning in vmci_datagram_invoke_guest_handler() lib/string_helpers: Add flags param to string_get_size() x86, relocs: Ignore relocations in .notes section objtool: Fix UNWIND_HINT_{SAVE,RESTORE} across basic blocks overflow: Use POD in check_shl_overflow() lib: stackinit: Adjust target string to 8 bytes for m68k sparc: vdso: Disable UBSAN instrumentation kernel.h: Move lib/cmdline.c prototypes to string.h leaking_addresses: Provide mechanism to scan binary files leaking_addresses: Ignore input device status lines leaking_addresses: Use File::Temp for /tmp files MAINTAINERS: Update LEAKING_ADDRESSES details fortify: Improve buffer overflow reporting fortify: Add KUnit tests for runtime overflows ...
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-26 12:43:27 +0300