summaryrefslogtreecommitdiff
path: root/arch/arm/boot
AgeCommit message (Collapse)AuthorFilesLines
2022-08-30ARM: dts: qcom: align SPMI PMIC ADC node name with dtschemaKrzysztof Kozlowski2-2/+2
Bindings expect VADC node name to be "adc": pmic@0: 'vadc@3100' does not match any of the regexes Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: David Heidelberg <david@ixit.cz> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220828084341.112146-2-krzysztof.kozlowski@linaro.org
2022-08-30ARM: dts: qcom: use GPIO flags for tlmmKrzysztof Kozlowski5-7/+10
Use respective GPIO_ACTIVE_LOW/HIGH flags for tlmm GPIOs. Include gpio.h header if this is first usage of that flag. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220802153947.44457-5-krzysztof.kozlowski@linaro.org
2022-08-30ARM: dts: qcom: msm8660-surf: move fixed regulator out of socKrzysztof Kozlowski1-9/+7
Fixed regulators, like stub for SDCC Power, are not part of SoC, so they should be outside of the soc node. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220810080516.166866-4-krzysztof.kozlowski@linaro.org
2022-08-30ARM: dts: qcom: msm8660: override nodes by labelKrzysztof Kozlowski1-21/+20
Using node paths to extend or override a device tree node is error prone. If there was a typo error, a new node will be created instead of extending the existing node. This will lead to run-time errors that could be hard to detect. A mistyped label on the other hand, will cause a dtc compile error (during build time). This also reduces the indentation making the code easier to read. The pre/post DTBS are the same. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220810080516.166866-3-krzysztof.kozlowski@linaro.org
2022-08-30ARM: dts: qcom: msm8226: override nodes by labelKrzysztof Kozlowski1-4/+2
Using node paths to extend or override a device tree node is error prone. If there was a typo error, a new node will be created instead of extending the existing node. This will lead to run-time errors that could be hard to detect. A mistyped label on the other hand, will cause a dtc compile error (during build time). This also reduces the indentation making the code easier to read. The pre/post DTBS are the same. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220810080516.166866-2-krzysztof.kozlowski@linaro.org
2022-08-30ARM: dts: qcom: msm8960: override nodes by labelKrzysztof Kozlowski2-315/+314
Using node paths to extend or override a device tree node is error prone. If there was a typo error, a new node will be created instead of extending the existing node. This will lead to run-time errors that could be hard to detect. A mistyped label on the other hand, will cause a dtc compile error (during build time). This also reduces the indentation making the code easier to read. The pre/post DTBS are the same. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220810080516.166866-1-krzysztof.kozlowski@linaro.org
2022-08-30ARM: dts: qcom: ipq8064: add ipq8065 variantChristian Marangi2-0/+45
ipq8065 SoC is based on ipq8064-v2.0 with a more clocked CPU and an increased voltage output with the smb208 regulators. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220718161826.4943-3-ansuelsmth@gmail.com
2022-08-30ARM: dts: qcom: ipq8064: add ipq8062 variantChristian Marangi2-0/+45
ipq8062 SoC is based on ipq8064-v2.0 with lower supported freq, lack of usb port and a reduced voltage output with the smb208 regulators. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220718161826.4943-2-ansuelsmth@gmail.com
2022-08-30ARM: dts: qcom: ipq8064: add v2 dtsi variantChristian Marangi2-0/+106
Add ipq8064-v2.0 dtsi variant that differ from original ipq8064 SoC for some additional pcie, sata and usb configuration values, additional reserved memory and serial output. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220718161826.4943-1-ansuelsmth@gmail.com
2022-08-30ARM: dts: qcom-*: replace deprecated perst-gpio with perst-gpiosDmitry Baryshkov5-7/+7
Replace deprecated perst-gpio properties with up-to-date perst-gpios in the arm32 Qualcomm Snapdragon device trees. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220506152107.1527552-8-dmitry.baryshkov@linaro.org
2022-08-30ARM: dts: qcom: stop using snps,dw-pcie falbackDmitry Baryshkov2-2/+2
Qualcomm PCIe devices are not really compatible with the snps,dw-pcie. Unlike the generic IP core, they have special requirements regarding enabling clocks, toggling resets, using the PHY, etc. This is not to mention that platform snps-dw-pcie driver expects to find two IRQs declared, while Qualcomm platforms use just one. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220506152107.1527552-7-dmitry.baryshkov@linaro.org
2022-08-30ARM: dts: qcom-msm8916-samsung-e2015: Include dts from arm64Lin, Meng-Bo4-0/+12
After adding all necessary support for MSM8916 SMP/cpuidle without PSCI on ARM32, build the Samsung Galaxy E5/E7/Grand Max device trees from the arm64 tree together with the ARM32 include to allow booting this device on ARM32. The approach to include device tree files from other architectures is inspired from e.g. the Raspberry Pi (bcm2711-rpi-4-b.dts) where this is used to build the device tree for both ARM32 and ARM64. Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220724095413.14135-1-linmengbo0689@protonmail.com
2022-08-29ARM: dts: at91: sam9x60ek: remove simple-bus for regulatorsClaudiu Beznea1-42/+36
Keep regulators as individual devices. There is no need to have them under simple bus. This will throw compilation warnings like: - unnecessary #address-cells/#size-cells without "ranges" or child "reg" property. - node has a unit name, but no reg or ranges property. While at it move it down a bit in the file to keep entries sorted alphabetically. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220826083927.3107272-10-claudiu.beznea@microchip.com
2022-08-29ARM: dts: lan966x: add support for pcb8290Horatiu Vultur2-0/+176
Add basic support for pcb8290. It has 2 lan8814 phys(each phy is a quad-port) on the external MDIO bus and no SFP ports. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220825065135.1075049-1-horatiu.vultur@microchip.com
2022-08-29Merge tag 'versatile-dts-v6.1' of ↵Arnd Bergmann6-7/+7
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into arm/fixes These are some Versatile family DTS fixes, fixing some node names and clock names related to SPI. * tag 'versatile-dts-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator: ARM: dts: versatile: Update spi clock-names property ARM: dts: realview: Update spi clock-names property ARM: dts: integratorap: Update spi node properties Link: https://lore.kernel.org/r/CACRpkdZfTe8NSGR2ZCkn-1JcNobjfWeXqajSqcJMp8+WtY+2Xw@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-08-26ARM: dts: Let Gemini NS2502 parse redboot partitionsLinus Walleij1-24/+3
The NS2502 uses hardcoded partitions but parsing the RedBoot FIS should work fine, given that this flash seems to be using 0x200000 erase blocks. Cc: Corentin Labbe <clabbe.montjoie@gmail.com> Link: https://lore.kernel.org/r/20220412220358.3674598-1-linus.walleij@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-08-26ARM: dts: gemini: ssi1328: permit to use gigabitCorentin Labbe1-4/+0
I believed that gigabit was not working due to unknown missing GPIO. But the problem was due to Marvell PHY incorrectly setting delay. Now it is fixed, gigabit works. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-08-26ARM: dts: gemini: ns2502: permit to use gigabitCorentin Labbe1-5/+1
I believed that gigabit was not working due to some unknown missing GPIO. In fact, gigabit worked when REALTEK_PHY was compiled out. So the problem was due to PHY delay and we need to use rgmii-id. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-08-26ARM: dts: aspeed: Add HACE device controller nodeNeal Liu2-0/+16
Add hace node to device tree for AST2500/AST2600. Signed-off-by: Neal Liu <neal_liu@aspeedtech.com> Signed-off-by: Johnny Huang <johnny_huang@aspeedtech.com> Reviewed-by: Dhananjay Phadke <dphadke@linux.microsoft.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-08-22ARM: dts: imx6qdl-dhcom: Move IPU iomux node from PDK2 to SoM fileChristoph Niedermaier2-33/+33
The SoM itself provides the display interface, see [1] page 20. Those pins have to be used as the RGB/DPI interface or not used at all. So rather than duplicate the pinmux settings in every carrier board DT, better move them into the SoM DTSI. [1] https://wiki.dh-electronics.com/images/2/2e/DOC_DHCOM-Standard-Specification_R01_2016-11-17.pdf Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-08-22ARM: dts: imx6ul-kontron: Add imx6ull-kontron-bl to MakefileFrieder Schrempf1-0/+1
The imx6ull-kontron-bl.dtb wasn't build as part of the CONFIG_SOC_IMX6UL option. Add it to the list. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-08-22ARM: dts: imx6ul-kontron: Simplify devicetree structureFrieder Schrempf13-164/+67
There is no need in differentiating between the different SoM versions that only differ in memory size, etc. It's much cleaner to simplify the devicetrees and let them be more generic. If necessary the bootloader will update the devicetree dynamically to contain the correct size of the memory. We also get rid of the N6xxx notation in the compatibles and file names, as they are not really used anymore and often result in confusion. This is a breaking change, but the impact shouldn't be too big and it makes usage and maintenance easier in the future. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-08-22ARM: dts: vf610: align SPI node name with dtschemaKrzysztof Kozlowski2-2/+2
The node names should be generic and DT schema expects certain pattern. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-08-22ARM: dts: imx: align gpio-keys node names with dtschemaKrzysztof Kozlowski22-75/+75
The node names should be generic and DT schema expects certain pattern. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-08-22ARM: dts: imx: align LED node names with dtschemaKrzysztof Kozlowski5-5/+5
The node names should be generic and DT schema expects certain pattern. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-08-22ARM: dts: imx: align SPI node name with dtschemaKrzysztof Kozlowski8-9/+9
The node names should be generic and DT schema expects certain pattern. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-08-22ARM: dts: imx6qdl-tqma6x: add fixed power suppliesPhilipp Zabel2-0/+2
Add fixed power supplies to the EEPROM nodes to suppress a warning: at24 2-0050: supply vcc not found, using dummy regulator Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-08-21ARM: dts: ls1021a: Use generic node name for DMAKuldeep Singh1-1/+1
DT spec expects generic DMA controller node name as "dma-controller" to enable validations. Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-08-21ARM: dts: imx6qdl-kontron-samx6i: hook up DDC i2c busLucas Stach1-1/+5
i2c2 is routed to the pins dedicated as DDC in the module standard. Reduce clock rate to 100kHz to be in line with VESA standard and hook this bus up to the HDMI node. Fixes: 708ed2649ad8 ("ARM: dts: imx6qdl-kontron-samx6i: increase i2c-frequency") Signed-off-by: Lucas Stach <l.stach@pengutronix.de> [m.felsch@pengutronix.de: add fixes line] Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-08-21ARM: dts: imx6qdl-kontron-samx6i: move phy reset into phy-nodeMarco Felsch1-1/+13
Add ethernet-phy node so we can drop the deprecated fec phy-reset-gpios property. The reset-assert-us value is taken from the existing logic since the fec driver will add an 1ms assert delay per default if phy-reset-gpios is used and phy-reset-duration is not specified. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-08-21ARM: dts: imx6qdl-kontron-samx6i: fix spi-flash compatibleMarco Felsch1-1/+1
Drop the "winbond,w25q16dw" compatible since it causes to set the MODALIAS to w25q16dw which is not specified within spi-nor id table. Fix this by use the common "jedec,spi-nor" compatible. Fixes: 2125212785c9 ("ARM: dts: imx6qdl-kontron-samx6i: add Kontron SMARC SoM Support") Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-08-21ARM: dts: imx6qdl-kontron-samx6i: remove duplicated nodeMarco Felsch1-10/+0
The regulator node 'regulator-3p3v-s0' was dupplicated. Remove it to clean the DTS. Fixes: 2a51f9dae13d ("ARM: dts: imx6qdl-kontron-samx6i: Add iMX6-based Kontron SMARC-sAMX6i module") Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-08-21ARM: dts: imx6qdl-vicut1.dtsi: Fix node name backlight_ledDavid Jander1-1/+1
This naming error slipped through, so now that a new backlight node has been added with correct spelling, fix this one also. Fixes: 98efa526a0c4 ("ARM: dts: imx6qdl-vicut1/vicutgo: Add backlight_led node") Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-08-21ARM: dts: imx6qdl-vicut1.dtsi: Add backlight-isb nodeDavid Jander1-0/+22
On some older hardware models this is needed. It will do no harm if used with newer models though. Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-08-21ARM: dts: imx7d-sdb: config the max pressure for tsc2046Haibo Chen1-6/+1
Use the general touchscreen method to config the max pressure for touch tsc2046(data sheet suggest 8 bit pressure), otherwise, for ABS_PRESSURE, when config the same max and min value, weston will meet the following issue, [17:19:39.183] event1 - ADS7846 Touchscreen: is tagged by udev as: Touchscreen [17:19:39.183] event1 - ADS7846 Touchscreen: kernel bug: device has min == max on ABS_PRESSURE [17:19:39.183] event1 - ADS7846 Touchscreen: was rejected [17:19:39.183] event1 - not using input device '/dev/input/event1' This will then cause the APP weston-touch-calibrator can't list touch devices. root@imx6ul7d:~# weston-touch-calibrator could not load cursor 'dnd-move' could not load cursor 'dnd-copy' could not load cursor 'dnd-none' No devices listed. And accroding to binding Doc, "ti,x-max", "ti,y-max", "ti,pressure-max" belong to the deprecated properties, so remove them. Also for "ti,x-min", "ti,y-min", "ti,x-plate-ohms", the value set in dts equal to the default value in driver, so are redundant, also remove here. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-08-21ARM: dts: vf610: don't use multiple blank linesMarcel Ziswiler1-1/+0
Avoid the following checkpatch warning: arch/arm/boot/dts/vf610.dtsi:5: check: Please don't use multiple blank lines Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-08-21ARM: dts: vf610-twr: indent use tabs, no spaces at start of lineMarcel Ziswiler1-1/+1
Avoid the following checkpatch warning: arch/arm/boot/dts/vf610-twr.dts:172: warning: please, no spaces at the start of a line Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-08-21ARM: dts: vf610: no spaces in indent but tabsMarcel Ziswiler1-1/+1
Avoid spaces in indent but rather use tabs. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-08-21ARM: dts: imx7d-pico: indent use tabs, no spaces at start of lineMarcel Ziswiler1-5/+5
Avoid the following checkpatch warning: arch/arm/boot/dts/imx7d-pico.dtsi:44: error: code indent should use tabs where possible arch/arm/boot/dts/imx7d-pico.dtsi:44: warning: please, no spaces at the start of a line Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-08-21ARM: dts: imx6qdl-sabre: change to use SPDX identifiersMarcel Ziswiler1-36/+1
Replace the license text with SPDX identifiers. Avoid the following checkpatch warning: arch/arm/boot/dts/imx6qdl-sabrelite.dtsi:1: warning: Missing or malformed SPDX-License-Identifier tag in line 1 Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-08-21ARM: dts: imx6qdl: phytec: no spaces at start of line, indent use tabsMarcel Ziswiler1-1/+1
Avoid the following checkpatch warnings: arch/arm/boot/dts/imx6qdl-phytec-mira-peb-av-02.dtsi:67: error: code indent should use tabs where possible arch/arm/boot/dts/imx6qdl-phytec-mira-peb-av-02.dtsi:67: warning: please, no spaces at the start of a line Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-08-21ARM: dts: imx6qdl-mba6: don't use multiple blank linesMarcel Ziswiler1-1/+0
Avoid the following checkpatch warning: arch/arm/boot/dts/imx6qdl-mba6.dtsi:247: check: Please don't use multiple blank lines Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-08-21ARM: dts: imx6-sabrelite: change to use SPDX identifiersMarcel Ziswiler1-36/+1
Replace the license text with SPDX identifiers. Avoid the following checkpatch warning: arch/arm/boot/dts/imx6q-sabrelite.dts:1: warning: Missing or malformed SPDX-License-Identifier tag in line 1 Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-08-21ARM: dts: imx6q-mccmon6: Add fsl,err006687-workaround-present propertyAlexander Stein1-0/+1
Add property for ERR006687 hardware workaround. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-08-21ARM: dts: imx6: delete interrupts property if interrupts-extended is setAlexander Stein11-0/+11
In most cases this is related to fsl,err006687-workaround-present, which requires a GPIO interrupt next a GIC interrupt. This fixes the dtbs_check warning: imx6dl-mba6a.dtb: ethernet@2188000: More than one condition true in oneOf schema: {'$filename': 'Documentation/devicetree/bindings/net/fsl,fec.yaml', [...] Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-08-19ARM: dts: versatile: Update spi clock-names propertyKuldeep Singh1-1/+1
Now that spi pl022 binding only accept "sspclk" as clock name, versatile platform with "SSPCLK" clock name start raising dtbs_check warnings. Make necessary changes to update this property in order to make it compliant with binding. clock-names:0: 'sspclk' was expected Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com> Link: https://lore.kernel.org/r/20220312113853.63446-4-singh.kuldeep87k@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-08-19ARM: dts: realview: Update spi clock-names propertyKuldeep Singh4-4/+4
Now that spi pl022 binding only accept "sspclk" as clock name, realview platforms with "SSPCLK" clock name start raising dtbs_check warnings. Make necessary changes to update this property in order to make it compliant with binding. clock-names:0: 'sspclk' was expected Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com> Link: https://lore.kernel.org/r/20220312113853.63446-3-singh.kuldeep87k@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-08-19ARM: dts: integratorap: Update spi node propertiesKuldeep Singh1-2/+2
As per spi pl022 binding, SPI clock name is "sspclk" and not "spiclk". Fix it. Also update ssp node name to enable spi bindings check. Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com> Link: https://lore.kernel.org/r/20220312113853.63446-2-singh.kuldeep87k@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-08-18ARM: dts: qcom: msm8974: add rpm-stats device nodeDmitry Baryshkov1-0/+5
Add device node for the rpm-stats pseudo device. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220726205355.598874-2-dmitry.baryshkov@linaro.org
2022-08-18ARM: dts: qcom: apq8084: add rpm-stats device nodeDmitry Baryshkov1-0/+5
Add device node for the rpm-stats pseudo device. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220726205355.598874-1-dmitry.baryshkov@linaro.org
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-02 10:15:54 +0300