summaryrefslogtreecommitdiff
path: root/arch/arm/boot
AgeCommit message (Collapse)AuthorFilesLines
2020-12-03ARM: dts: at91: sam9x60ek: remove bypass propertyClaudiu Beznea1-4/+0
atmel,osc-bypass property sets the bit 1 at main oscillator register. On SAM9X60 this bit is not valid according to datasheet (chapter 28.16.9 PMC Clock Generator Main Oscillator Register). Fixes: 1e5f532c2737 ("ARM: dts: at91: sam9x60: add device tree for soc and board") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Marco Cardellini <marco.cardellini@microchip.com> Link: https://lore.kernel.org/r/1606903025-14197-2-git-send-email-claudiu.beznea@microchip.com
2020-12-03ARM: dts: exynos: Reduce assigned-clocks entries for SPI0 on Artik5 boardMarek Szyprowski1-5/+2
Commit 2024b130b0c8 ("ARM: dts: exynos: Add Ethernet to Artik 5 board") added ethernet chip on SPI0 bus and the whole bunch of assigned clock entries to ensure proper clock rates and topology. Limit the assigned clock parents only to the direct clocks of the SPI0 device and assume that MPLL clock is already properly configured. The applied clock topology was incorrect as some clocks between were missing, what resulted in the following warning: clk: failed to reparent div_mpll_pre to mout_mpll: -22 Fixes: 2024b130b0c8 ("ARM: dts: exynos: Add Ethernet to Artik 5 board") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20201202122029.22198-1-m.szyprowski@samsung.com Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-12-02ARM: dts: s3c6410: correct SMDK6410 board compatibleKrzysztof Kozlowski1-1/+1
The SMDK6410 DTS was incorrectly called mini6410, probably copy-paste from FriendlyARM Mini6410 board. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201117201106.128813-4-krzk@kernel.org
2020-12-02ARM: dts: s3c24xx: add SMDK2416 board compatibleKrzysztof Kozlowski1-1/+1
Add a compatible for SMDK2416 board next to the SoC compatible. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201117201106.128813-3-krzk@kernel.org
2020-12-01ARM: dts: at91: remove deprecated ADC propertiesAlexandre Belloni6-154/+0
atmel,adc-res, atmel,adc-res-names and the trigger nodes are not parsed by the driver anymore and the information is now defined in the driver data. Also remove the leftover #address-cells and #size-cells that were used when the trigger nodes had a unit-address. Finally, the default is already to use the highest resoution. Remove atmel,adc-use-res from the SoC dtsi. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Ludovic Desroches <ludovic.desroches@microchip.com> Link: https://lore.kernel.org/r/20201128222818.1910764-11-alexandre.belloni@bootlin.com
2020-12-01ARM: dts: at91: at91sam9rl: fix ADC triggersAlexandre Belloni1-8/+11
The triggers for the ADC were taken from at91sam9260 dtsi but are not correct. Fixes: a4c1d6c75822 ("ARM: at91/dt: sam9rl: add lcd, adc, usb gadget and pwm support") Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20201128222818.1910764-10-alexandre.belloni@bootlin.com
2020-12-01ARM: dts: at91: sama5d3: use proper ADC compatibleAlexandre Belloni1-1/+1
The ADC is different from the at91sam9x5 ADC. Not only it doesn't have the same resolution but it even has only one and the LOWRES bit doesn't exist. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Ludovic Desroches <ludovic.desroches@microchip.com> Link: https://lore.kernel.org/r/20201128222818.1910764-9-alexandre.belloni@bootlin.com
2020-12-01ARM: dts: at91: kizbox: switch to new pwm-atmel-tcb bindingAlexandre Belloni1-15/+30
Switch to the new pwm-atmel-tcb binding that avoid wasting TCB channels. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Antoine Aubert <a.aubert@overkiz.com> Link: https://lore.kernel.org/r/20201030183658.1007395-5-alexandre.belloni@bootlin.com
2020-12-01kbuild: Hoist '--orphan-handling' into KconfigNathan Chancellor1-1/+3
Currently, '--orphan-handling=warn' is spread out across four different architectures in their respective Makefiles, which makes it a little unruly to deal with in case it needs to be disabled for a specific linker version (in this case, ld.lld 10.0.1). To make it easier to control this, hoist this warning into Kconfig and the main Makefile so that disabling it is simpler, as the warning will only be enabled in a couple places (main Makefile and a couple of compressed boot folders that blow away LDFLAGS_vmlinx) and making it conditional is easier due to Kconfig syntax. One small additional benefit of this is saving a call to ld-option on incremental builds because we will have already evaluated it for CONFIG_LD_ORPHAN_WARN. To keep the list of supported architectures the same, introduce CONFIG_ARCH_WANT_LD_ORPHAN_WARN, which an architecture can select to gain this automatically after all of the sections are specified and size asserted. A special thanks to Kees Cook for the help text on this config. Link: https://github.com/ClangBuiltLinux/linux/issues/1187 Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-12-01ARM: dts: imx28: Fix label name for L2 switchLukasz Majewski1-1/+1
The 'eth_switch' name has been misspelled in the imx28.dtsi file, so this change fixes it. Signed-off-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-12-01ARM: dts: add Protonic WD3 boardOleksij Rempel2-0/+554
Protonic WD3 is a proof of concept platform for tractor e-cockpit applications Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-12-01ARM: dts: imx6qdl-kontron-samx6i: fix I2C_PM scl pinBernd Bauer1-1/+1
Use the correct pin for the i2c scl signal else we can't access the SoM eeprom. Fixes: 2a51f9dae13d ("ARM: dts: imx6qdl-kontron-samx6i: Add iMX6-based Kontron SMARC-sAMX6i module") Signed-off-by: Bernd Bauer <bernd.bauer@anton-paar.com> [m.felsch@pengutronix.de: Adapt commit message] Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-12-01ARM: dts: imx6qdl-kontron-samx6i: increase i2c-frequencyMarco Felsch1-3/+3
Set it to max. allowed 375kHz for faster transfers. The limit is given by the erratum [1]. [1] https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-12-01ARM: dts: imx6qdl-wandboard-revd1: Remove PAD_GPIO_6 from enetgrpFabio Estevam1-1/+0
Since commit 8ad2d1dcce54 ("ARM: dts: imx6qdl-wandboard: Add OV5645 camera support") the PAD_GPIO_6 is used for providing the camera sensor clock. Remove it from the enetgrp to fix the following IOMXU conflict: [ 9.972414] imx6q-pinctrl 20e0000.pinctrl: pin MX6Q_PAD_GPIO_6 already requested by 2188000.ethernet; cannot claim for 1-003c [ 9.983857] imx6q-pinctrl 20e0000.pinctrl: pin-140 (1-003c) status -22 [ 9.990514] imx6q-pinctrl 20e0000.pinctrl: could not request pin 140 (MX6Q_PAD_GPIO_6) from group ov5645grp on device 20e0000.pinctrl Fixes: 8ad2d1dcce54 ("ARM: dts: imx6qdl-wandboard: Add OV5645 camera support") Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-11-30Merge tag 'aspeed-5.11-soc' of ↵Arnd Bergmann3-0/+15
git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/drivers ASPEED soc driver updates for 5.11 New drivers: - SoC info driver to expose revision information New features: - AST2600 support for the LPC control driver. This includes setting the LPC2AHB bridge up in a backwards compatible manner. Cleanups: - LPC control - Kconfig - Bindings updates for AST2600 strings * tag 'aspeed-5.11-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed: soc: aspeed: Enable drivers with ARCH_ASPEED soc: aspeed: Fix a reference leak in aspeed_socinfo_init() soc: aspeed: remove unneeded semicolon soc: aspeed-lpc-ctrl: Fix driver name soc: aspeed-lpc-ctrl: Fix whitespace soc: aspeed-lpc-ctrl: LPC to AHB mapping on ast2600 soc: aspeed-lpc-ctrl: Fail probe of lpc-ctrl if reserved memory is not aligned soc: aspeed: lpc: Add AST2600 compatible strings dt-bindings: aspeed-lpc: Add AST2600 compatible strings ARM: dts: aspeed: Add silicon id node soc: aspeed: Add soc info driver dt-bindings: aspeed: Add silicon id node to SCU soc: aspeed: Improve kconfig Link: https://lore.kernel.org/r/CACPK8Xe=9ezhyWRMqVOEQr7SU1YoYfVBGGdGzjmE4SiBr--vJQ@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-30ARM: dts: mvebu: Add device tree for RD-AC3X-48G4X2XL boardAryan Srivastava2-0/+113
Add device tree for RD-AC3X-48G4X2XL board. This has a Armada 382 SoC on a interposer board connected to a baseboard with a Prestera AC3X ASIC connected via PCI. Signed-off-by: Aryan Srivastava <aryan.srivastava@alliedtelesis.co.nz> Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2020-11-30arm: dts: marvell: armada-375: Harmonize DWC USB3 DT nodes nameSerge Semin1-1/+1
In accordance with the DWC USB3 bindings the corresponding node name is suppose to comply with the Generic USB HCD DT schema, which requires the USB nodes to have the name acceptable by the regexp: "^usb(@.*)?" . Make sure the "snps,dwc3"-compatible nodes are correctly named. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2020-11-30ARM: dts: rockchip: Add SDIO0 node for VMARC SOMJagan Teki2-0/+38
Rockchip RK3288 and RK3399Pro based VMARC SOM has sdio0 for connecting WiFi/BT devices as a pluggable card via M.2 E-Key. Add associated sdio0 nodes, properties. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Link: https://lore.kernel.org/r/20201023181814.220974-2-jagan@amarulasolutions.com [moved the unrelated rtc addition to a separate patch] Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-11-30ARM: dts: rockchip: Add rtc node for VMARC SOMJagan Teki1-0/+23
Add the hym8563 rtc found on the rk3288 variant of the VMARC SOM. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Link: https://lore.kernel.org/r/20201023181814.220974-2-jagan@amarulasolutions.com [split out of the original patch, as it was a change unrelated to the commit description] Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-11-30ARM: dts: rockchip: rename wdt nodename to watchdog on rv1108Johan Jonker1-1/+1
A test with the command below gives for example this error: /arch/arm/boot/dts/rv1108-evb.dt.yaml: wdt@10360000: $nodename:0: 'wdt@10360000' does not match '^watchdog(@.*|-[0-9a-f])?$' Fix it by renaming the wdt nodename to watchdog in the rv1108.dtsi file. make ARCH=arm dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20201116150756.14265-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-11-30ARM: dts: turris-omnia: remove unneeded status = "okay" propertiesMarek Behún1-2/+0
Only nodes which have status = "disabled" defined from included files need status = "okay". The ethernet-phy node and the i2cmux node do not need it, since they are wholly defined here. Signed-off-by: Marek Behún <kabel@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Cc: Uwe Kleine-König <uwe@kleine-koenig.org> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Gregory CLEMENT <gregory.clement@bootlin.com> Cc: Andreas Färber <afaerber@suse.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2020-11-30ARM: dts: turris-omnia: update ethernet-phy node and handle nameMarek Behún1-3/+3
Use property name `phy-handle` instead of the deprecated `phy` to connect eth2 to the PHY. Rename the node from "phy@1" to "ethernet-phy@1", since "phy@1" is incorrect according to device-tree bindings documentation. Also remove the "ethernet-phy-id0141.0DD1" compatible string, it is not needed. Kernel can read the PHY identifier itself. Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Cc: linux-arm-kernel@lists.infradead.org Cc: Uwe Kleine-König <uwe@kleine-koenig.org> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Gregory CLEMENT <gregory.clement@bootlin.com> Cc: Andreas Färber <afaerber@suse.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2020-11-30ARM: dts: turris-omnia: add LED controller nodeMarek Behún1-1/+110
Linux now has incomplete support for the LED controller on Turris Omnia: it can set brightness and colors for each LED. The controller can also put these LEDs into HW controlled mode, in which the LEDs are controlled by HW: for example the WAN LED is connected via MCU to the WAN PHY LED pin. The driver does not support these HW controlled modes yet, and on probe puts the LEDs into SW controlled mode. Add node describing the LED controller, but disable it for now. Signed-off-by: Marek Behún <kabel@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Cc: Uwe Kleine-König <uwe@kleine-koenig.org> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Gregory CLEMENT <gregory.clement@bootlin.com> Cc: Andreas Färber <afaerber@suse.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2020-11-30ARM: dts: turris-omnia: add SFP nodeMarek Behún1-1/+29
Turris Omnia has an SFP cage that, together with WAN PHY, is connected to eth2 SerDes via a SerDes multiplexor. When a SFP module is present, the multiplexor switches the SerDes signal from PHY to SFP. Describe the SFP cage, but leave it disabled. Until phylink has support for such configuration, we are leaving it to U-Boot to enable SFP and disable WAN PHY at boot time depending on whether a SFP module is present. Signed-off-by: Marek Behún <kabel@kernel.org> Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Cc: Russell King - ARM Linux admin <linux@armlinux.org.uk> Cc: linux-arm-kernel@lists.infradead.org Cc: Uwe Kleine-König <uwe@kleine-koenig.org> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Gregory CLEMENT <gregory.clement@bootlin.com> Cc: Andreas Färber <afaerber@suse.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2020-11-30ARM: dts: turris-omnia: describe switch interruptMarek Behún1-1/+11
Describe switch interrupt for Turris Omnia so that the CPU does not have to poll the switch. We also need to to set mpp45 pin to gpio function for this. Signed-off-by: Marek Behún <kabel@kernel.org> Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia") Cc: linux-arm-kernel@lists.infradead.org Cc: Uwe Kleine-König <uwe@kleine-koenig.org> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Gregory CLEMENT <gregory.clement@bootlin.com> Cc: Andreas Färber <afaerber@suse.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2020-11-30ARM: dts: turris-omnia: add comphy handle to eth2Marek Behún1-0/+1
The eth2 controller on Turris Omnia is connected to SerDes. For SFP to be able to switch between 1G and 2.5G modes the comphy link has to be defined. Signed-off-by: Marek Behún <kabel@kernel.org> Fixes: f3a6a9f3704a ("ARM: dts: add description for Armada 38x ...") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Andreas Färber <afaerber@suse.de> Cc: linux-arm-kernel@lists.infradead.org Cc: Uwe Kleine-König <uwe@kleine-koenig.org> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Gregory CLEMENT <gregory.clement@bootlin.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2020-11-30ARM: dts: turris-omnia: enable HW buffer managementMarek Behún1-0/+17
The buffer manager is available on Turris Omnia but needs to be described in device-tree to be used. Signed-off-by: Marek Behún <kabel@kernel.org> Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia") Cc: linux-arm-kernel@lists.infradead.org Cc: Uwe Kleine-König <uwe@kleine-koenig.org> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Gregory CLEMENT <gregory.clement@bootlin.com> Cc: Andreas Färber <afaerber@suse.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2020-11-30ARM: dts: imx7: add support for kamstrup flex concentratorBruno Thomsen3-0/+341
This adds support for the OMNIA Flex Concentrator product from Kamstrup A/S. It's providing radio mesh communication infrastructure for smart electricity meters. Kamstrup OMNIA is a modular and scalable smart grid platform. Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-11-30ARM: dts: ls1021a: update calibration table for TMU moduleYuantian Tang1-40/+37
Update the calibration table to make the temperature more accurate. Signed-off-by: Yuantian Tang <andy.tang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-11-30ARM: dts: ls1021a: fix rcpm failed to claim resourceRan Wang1-1/+1
The range of dcfg reg is wrong, which overlap with other device, such as rcpm. This issue causing rcpm driver failed to claim reg resource when calling devm_ioremap_resource(). Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Acked-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-11-30ARM: dts: ls1021a: fix flextimer failed to wake systemRan Wang1-1/+1
The data of property 'fsl,rcpm-wakeup' is not corrcet, which causing RCPM driver incorrectly program register IPPDEXPCR1, then flextimer is wrongly clock gated during system suspend, can't send interrupt to wake. Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Acked-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-11-29ARM: dts: Add i2c0 pinctrl information for 98dx3236Chris Packham1-0/+7
Add pinctrl information for the 98dx3236 (and variants). There is only one choice for i2c0 MPP14 and MPP15. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2020-11-29ARM: dts: Remove non-existent i2c1 from 98dx3236Chris Packham1-5/+0
The switches with integrated CPUs have only got a single i2c controller. They incorrectly gained one when they were split from the Armada-XP. Fixes: 43e28ba87708 ("ARM: dts: Use armada-370-xp as a base for armada-xp-98dx3236") Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2020-11-29ARM: dts: armada: align GPIO hog names with dtschemaKrzysztof Kozlowski3-10/+10
The convention for node names is to use hyphens, not underscores. dtschema for pca95xx expects GPIO hogs to end with 'hog' prefix. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2020-11-29ARM: dts: dove: fix PCA95xx GPIO expander properties on A510Krzysztof Kozlowski1-0/+1
The PCA95xx GPIO expander requires GPIO controller properties to operate properly. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2020-11-29ARM: dts: kirkwood: replace status value "ok" by "okay"Adrian Schmutzler8-9/+9
While the DT parser recognizes "ok" as a valid value for the "status" property, it is actually mentioned nowhere. Use the proper value "okay" instead, as done in the majority of files already. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2020-11-29ARM: dts: mvebu: Add CRS328-4C-20S-4S boardLuka Kovacic4-0/+166
MikroTik CRS328-4C-20S-4S board has a switch chip with an integrated Marvell Prestera 98DX3236 CPU. This commit includes two board variants, namely the factory default one and a Bit variant. The Bit variant has a bigger Macronix flash. This device tree includes basic Linux support. Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Jakov Petrina <jakov.petrina@sartura.hr> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2020-11-29ARM: dts: mvebu: Add CRS305-1G-4S boardLuka Kovacic4-0/+166
MikroTik CRS305-1G-4S board has a switch chip with an integrated Marvell Prestera 98DX3236 CPU. This commit includes two board variants, namely the factory default one and a Bit variant. The Bit variant has a bigger Macronix flash. This device tree includes basic Linux support. Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Jakov Petrina <jakov.petrina@sartura.hr> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2020-11-29ARM: dts: mvebu: Add CRS326-24G-2S boardLuka Kovacic4-0/+166
MikroTik CRS326-24G-2S board has a switch chip with an integrated Marvell Prestera 98DX3236 CPU. This commit includes two board variants, namely the factory default one and a Bit variant. The Bit variant has a bigger Macronix flash. This device tree includes basic Linux support. Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Jakov Petrina <jakov.petrina@sartura.hr> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2020-11-28ARM: dts: qcom-pma8084: Drop incorrect use of io-channel-rangesJonathan Cameron1-1/+0
This property is used by io-channel consumers, not providers so should not present here. Note dt_schema will now detect this error as there is a dependency between this property and io-channels. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Andy Gross <andy.gross@linaro.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20201115192951.1073632-7-jic23@kernel.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-28Merge tag 'arm-soc-fixes-v5.10-3' of ↵Linus Torvalds2-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "Another set of patches for devicetree files and Arm SoC specific drivers: - A fix for OP-TEE shared memory on non-SMP systems - multiple code fixes for the OMAP platform, including one regression for the CPSW network driver and a few runtime warning fixes - Some DT patches for the Rockchip RK3399 platform, in particular fixing the MMC device ordering that recently became nondeterministic with async probe. - Multiple DT fixes for the Tegra platform, including a regression fix for suspend/resume on TX2 - A regression fix for a user-triggered fault in the NXP dpio driver - A regression fix for a bug caused by an earlier bug fix in the xilinx firmware driver - Two more DTC warning fixes - Sylvain Lemieux steps down as maintainer for the NXP LPC32xx platform" * tag 'arm-soc-fixes-v5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits) arm64: tegra: Fix Tegra234 VDK node names arm64: tegra: Wrong AON HSP reg property size arm64: tegra: Fix USB_VBUS_EN0 regulator on Jetson TX1 arm64: tegra: Correct the UART for Jetson Xavier NX arm64: tegra: Disable the ACONNECT for Jetson TX2 optee: add writeback to valid memory type firmware: xilinx: Use hash-table for api feature check firmware: xilinx: Fix SD DLL node reset issue soc: fsl: dpio: Get the cpumask through cpumask_of(cpu) ARM: dts: dra76x: m_can: fix order of clocks bus: ti-sysc: suppress err msg for timers used as clockevent/source MAINTAINERS: Remove myself as LPC32xx maintainers arm64: dts: qcom: clear the warnings caused by empty dma-ranges arm64: dts: broadcom: clear the warnings caused by empty dma-ranges ARM: dts: am437x-l4: fix compatible for cpsw switch dt node arm64: dts: rockchip: Reorder LED triggers from mmc devices on rk3399-roc-pc. arm64: dts: rockchip: Assign a fixed index to mmc devices on rk3399 boards. arm64: dts: rockchip: Remove system-power-controller from pmic on Odroid Go Advance arm64: dts: rockchip: fix NanoPi R2S GMAC clock name ARM: OMAP2+: Manage MPU state properly for omap_enter_idle_coupled() ...
2020-11-27Merge tag 'tegra-for-5.11-arm-dt' of ↵Arnd Bergmann20-22/+5656
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt ARM: tegra: Device tree changes for v5.11-rc1 This adds support for the Tegra30-based Ouya game console and enhances a number of existing device trees. It also fixes a couple of minor issues that were found during DT validation. * tag 'tegra-for-5.11-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (23 commits) ARM: tegra: Add EMC OPP and ICC properties to Tegra124 EMC and ACTMON device-tree nodes ARM: tegra: Add EMC OPP and ICC properties to Tegra30 EMC and ACTMON device-tree nodes ARM: tegra: Add EMC OPP properties to Tegra20 device-trees ARM: tegra: Add nvidia,memory-controller phandle to Tegra20 EMC device-tree ARM: tegra: Add interconnect properties to Tegra124 device-tree ARM: tegra: Add interconnect properties to Tegra30 device-tree ARM: tegra: Add interconnect properties to Tegra20 device-tree ARM: tegra: acer-a500: Add Embedded Controller ARM: tegra: Change order of SATA resets for Tegra124 ARM: tegra: Correct EMC registers size in Tegra20 device-tree ARM: tegra: Properly align clocks for SOCTHERM ARM: tegra: Hook up edp interrupt on Tegra124 SOCTHERM ARM: tegra: Add missing hot temperatures to Tegra124 thermal-zones ARM: tegra: Add missing gpu-throt-level to Tegra124 soctherm ARM: tegra: Populate OPP table for Tegra20 Ventana ARM: tegra: nexus7: Use panel-lvds as the only panel compatible ARM: tegra: nexus7: Rename gpio-hog nodes ARM: tegra: nexus7: Add power-supply to lvds-encoder node ARM: tegra: nexus7: Improve CPU passive-cooling threshold ARM: tegra: nexus7: Correct thermal zone names ... Link: https://lore.kernel.org/r/20201127144329.124891-4-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-27Merge tag 'stm32-dt-for-v5.11-1' of ↵Arnd Bergmann15-36/+396
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt STM32 DT updates for v5.11, round 1 Highlights: ---------- MCU part: -Fix dmamux reg property (length) on stm32h743. -Explicitly set DCMI bus type on stm32429i eval board. MPU part: -Enable FIFO mode with half-full threshold for DCMI. -Harmonize EHCI/OHCI nodes. -Move SDMMC IP version to v2.0 to get features improvements. -Add LP-timer wakeup support. -Enable crypto/hash/crc support. -Explicitly set DCMI bus type on stm32mp157 eval board. -Add USB type-c controller (STUSB1600) on stm32mp15 DK boards (It is connected to I2C4). -Fix dmamux reg property (length) on stm32mp151. -Optimize USB OTG FIFO sizes on stm32mp151. -Declare tamp node also as "simple-mfd". -LXA: -Document Octavo vendor-prefixes yaml file. -Document lxa,stm32mp157c-mc1 in STM32 yaml file. -DH: -Connect PHY IRQ line on DH SoM. -Add KS8851 Ethernet support on DHCOM which is mapped to FMC2. -Document all DH compatible strings in STM32 yaml file. -Add DHCOM based PicoITX board. This board embedds ethernet port, USB, CAN LEDS and a custom board-to-board connector. * tag 'stm32-dt-for-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (34 commits) ARM: dts: stm32: lxa-mc1: add OSD32MP15x to list of compatibles dt-bindings: arm: stm32: add extra SiP compatible for lxa,stm32mp157c-mc1 dt-bindings: vendor-prefixes: document Octavo Systems oct prefix ARM: dts: stm32: Add DHCOM based PicoITX board dt-bindings: arm: stm32: Add compatible strings for DH SoMs and boards ARM: dts: stm32: support child mfd cells for the stm32mp1 TAMP syscon dt-bindings: arm: stm32: add simple-mfd compatible for tamp node ARM: dts: stm32: update stm32mp151 for remote proc synchronization support ARM: dts: stm32: adjust USB OTG gadget fifo sizes in stm32mp151 ARM: dts: stm32: fix dmamux reg property on stm32h743 ARM: dts: stm32: fix dmamux reg property on stm32mp151 ARM: dts: stm32: fix mdma1 clients channel priority level on stm32mp151 ARM: dts: stm32: add STUSB1600 Type-C using I2C4 on stm32mp15xx-dkx dt-bindings: usb: Add DT bindings for STUSB160x Type-C controller dt-bindings: connector: add typec-power-opmode property to usb-connector ARM: dts: stm32: reorder spi4 within stm32mp15-pinctrl ARM: dts: stm32: set bus-type in DCMI endpoint for stm32429i-eval board ARM: dts: stm32: set bus-type in DCMI endpoint for stm32mp157c-ev1 board ARM: dts: stm32: enable CRYP by default on stm32mp15 ARM: dts: stm32: enable CRC1 by default on stm32mp15 ... Link: https://lore.kernel.org/r/873c17a5-28d5-9261-f691-1b917611c932@foss.st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-27Merge tag 'omap-for-v5.11/dt-signed' of ↵Arnd Bergmann17-172/+367
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt Devicetree changes for omaps for v5.11 merge window - Two non-urgent pandaboard updates to get gpio button and bluetooth working on pandaboard-es - Updates to follow devicetree binding docs for dwc3 and pwm-leds - Add initial support for droid bionic based on what we have for droid4 - Add second sha instance for dra7 - Add eQEP nodes for am335x for boneblue - Fix wrong comments for am335x gpio_31 * tag 'omap-for-v5.11/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am335x: Fix comments for AM335X_PIN_GPMC_WPN pin in GPIO mode ARM: dts: am335x-boneblue: Enable eQEP ARM: dts: am33xx: Add nodes for eQEP ARM: dts: dra7: add second SHA instance ARM: dts: xt875: add section for kionix kxtf9 ARM: dts: mapphone: separate out xt894 specific things ARM: dts: omap: Fix schema warnings for pwm-leds ARM: dts: omap5: Harmonize DWC USB3 DT nodes name ARM: dts: am437x: Correct DWC USB3 compatible string ARM: dts: pandaboard es: add bluetooth uart for HCI ARM: dts: pandaboard: fix pinmux for gpio user button of Pandaboard ES Link: https://lore.kernel.org/r/pull-1606462656-588116@atomide.com-2 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-27Merge tag 'omap-for-v5.10/fixes-rc5-signed' of ↵Arnd Bergmann2-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fixes for omaps for various issues noticed during the -rc cycle: - Earlier omap4 cpuidle fix was incomplete and needs to use a configured idle state instead - Fix am4 cpsw driver compatible to avoid invalid resource error for the legacy driver - Two kconfig fixes for genpd support that we added for for v5.10 for proper location of the option and adding missing option - Fix ti-sysc reset status checking on enabling modules to ignore quirky modules with reset status only usable when the quirk is activated during reset. Also fix bogus resetdone warning for cpsw and modules with no sysst register reset status bit - Suppress a ti-sysc warning for timers reserved as system timers - Fix the ordering of clocks for dra7 m_can * tag 'omap-for-v5.10/fixes-rc5-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: dra76x: m_can: fix order of clocks bus: ti-sysc: suppress err msg for timers used as clockevent/source ARM: dts: am437x-l4: fix compatible for cpsw switch dt node ARM: OMAP2+: Manage MPU state properly for omap_enter_idle_coupled() bus: ti-sysc: Fix bogus resetdone warning on enable for cpsw bus: ti-sysc: Fix reset status check for modules with quirks ARM: OMAP2+: Fix missing select PM_GENERIC_DOMAINS_OF ARM: OMAP2+: Fix location for select PM_GENERIC_DOMAINS Link: https://lore.kernel.org/r/pull-1606460270-864284@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-27Merge tag 'hisi-arm32-dt-for-5.11' of git://github.com/hisilicon/linux-hisi ↵Arnd Bergmann10-85/+85
into arm/dt ARM: DT: Hisilicon ARM32 DT updates for 5.11 - Cleanups of the hisilicon DTS to align with the dtschema including serial, usb, amba-bus, memory, mmc, spi and syscon. All of them do not have any functional effect except passing dtschema checks or dtc W=2 builds. * tag 'hisi-arm32-dt-for-5.11' of git://github.com/hisilicon/linux-hisi: ARM: dts: hisilicon: fix errors detected by syscon.yaml ARM: dts: hisilicon: fix errors detected by spi-pl022.yaml ARM: dts: hisilicon: fix errors detected by synopsys-dw-mshc.yaml ARM: dts: hisilicon: fix errors detected by root-node.yaml ARM: dts: hisilicon: fix errors detected by simple-bus.yaml ARM: dts: hisilicon: fix errors detected by usb yaml ARM: dts: hisilicon: fix errors detected by pl011.yaml ARM: dts: hisilicon: fix errors detected by snps-dw-apb-uart.yaml Link: https://lore.kernel.org/r/5FBDC347.4050102@hisilicon.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-26ARM: tegra: Add EMC OPP and ICC properties to Tegra124 EMC and ACTMON ↵Dmitry Osipenko6-0/+461
device-tree nodes Add EMC OPP DVFS/DFS tables and interconnect paths that will be used for dynamic memory bandwidth scaling based on memory utilization statistics. Update board device-trees by removing unsupported EMC OPPs. Note that ACTMON watches all memory interconnect paths, but we use a single CPU-READ interconnect path for driving memory bandwidth, for simplicity. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-11-26ARM: tegra: Add EMC OPP and ICC properties to Tegra30 EMC and ACTMON ↵Dmitry Osipenko4-0/+409
device-tree nodes Add EMC OPP tables and interconnect paths that will be used for dynamic memory bandwidth scaling based on memory utilization statistics. Update board device-trees by removing unsupported EMC OPPs. Note that ACTMON watches all memory interconnect paths, but we use a single CPU-READ interconnect path for driving memory bandwidth, for simplicity. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-11-26ARM: tegra: Add EMC OPP properties to Tegra20 device-treesDmitry Osipenko5-0/+125
Add EMC OPP DVFS tables and update board device-trees by removing unsupported OPPs. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-11-26ARM: tegra: Add nvidia,memory-controller phandle to Tegra20 EMC device-treeDmitry Osipenko1-0/+2
Add nvidia,memory-controller to the Tegra20 External Memory Controller node. This allows to perform a direct lookup of the Memory Controller instead of walking up the whole tree. This puts Tegra20 device-tree on par with Tegra30+. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-15 08:30:31 +0300