summaryrefslogtreecommitdiff
path: root/arch/arm/boot
AgeCommit message (Collapse)AuthorFilesLines
2019-05-08Merge tag 'usb-5.2-rc1' of ↵Linus Torvalds1-0/+7
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY updates from Greg KH: "Here is the big set of USB and PHY driver patches for 5.2-rc1 There is the usual set of: - USB gadget updates - PHY driver updates and additions - USB serial driver updates and fixes - typec updates and new chips supported - mtu3 driver updates - xhci driver updates - other tiny driver updates Nothing really interesting, just constant forward progress. All of these have been in linux-next for a while with no reported issues. The usb-gadget and usb-serial trees were merged a bit "late", but both of them had been in linux-next before they got merged here last Friday" * tag 'usb-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (206 commits) USB: serial: f81232: implement break control USB: serial: f81232: add high baud rate support USB: serial: f81232: clear overrun flag USB: serial: f81232: fix interrupt worker not stop usb: dwc3: Rename DWC3_DCTL_LPM_ERRATA usb: dwc3: Fix default lpm_nyet_threshold value usb: dwc3: debug: Print GET_STATUS(device) tracepoint usb: dwc3: Do core validation early on probe usb: dwc3: gadget: Set lpm_capable usb: gadget: atmel: tie wake lock to running clock usb: gadget: atmel: support USB suspend usb: gadget: atmel_usba_udc: simplify setting of interrupt-enabled mask dwc2: gadget: Fix completed transfer size calculation in DDMA usb: dwc2: Set lpm mode parameters depend on HW configuration usb: dwc2: Fix channel disable flow usb: dwc2: Set actual frame number for completed ISOC transfer usb: gadget: do not use __constant_cpu_to_le16 usb: dwc2: gadget: Increase descriptors count for ISOC's usb: introduce usb_ep_type_string() function usb: dwc3: move synchronize_irq() out of the spinlock protected block ...
2019-05-08Merge tag 'leds-for-5.2-rc1' of ↵Linus Torvalds1-9/+18
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED updates from Jacek Anaszewski: "LED core fixes and improvements: - avoid races with workqueue - Kconfig: pedantic cleanup - small fixes for Flash class description leds-lt3593: - remove unneeded assignment in lt3593_led_probe - drop pdata handling code leds-blinkm: - clean up double assignment to data->i2c_addr leds-pca955x, leds-pca963x: - revert ACPI support, as it turned out that there is no evidence of officially registered ACPI IDs for these devices. - make use of device property API leds-as3645a: - switch to fwnode property API LED related addition to ACPI documentation: - document how to refer to LEDs from remote nodes LED related fix to ALSA line6/toneport driver: - avoid polluting led_* namespace And lm3532 driver relocation from MFD to LED subsystem, accompanied by various improvements and optimizations; it entails also a change in omap4-droid4-xt894.dts: - leds: lm3532: Introduce the lm3532 LED driver - mfd: ti-lmu: Remove LM3532 backlight driver references - ARM: dts: omap4-droid4: Update backlight dt properties - dt: lm3532: Add lm3532 dt doc and update ti_lmu doc" * tag 'leds-for-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: leds: avoid races with workqueue ALSA: line6: Avoid polluting led_* namespace leds: lm3532: Introduce the lm3532 LED driver mfd: ti-lmu: Remove LM3532 backlight driver references ARM: dts: omap4-droid4: Update backlight dt properties dt: lm3532: Add lm3532 dt doc and update ti_lmu doc leds: Small fixes for Flash class description leds: blinkm: clean up double assignment to data->i2c_addr leds: pca963x: Make use of device property API leds: pca955x: Make use of device property API leds: lt3593: Remove unneeded assignment in lt3593_led_probe leds: lt3593: drop pdata handling code leds: pca955x: Revert "Add ACPI support" leds: pca963x: Revert "Add ACPI support" drivers: leds: Kconfig: pedantic cleanups ACPI: Document how to refer to LEDs from remote nodes leds: as3645a: Switch to fwnode property API
2019-05-07Merge tag 'staging-5.2-rc1' of ↵Linus Torvalds1-0/+28
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging / IIO driver updates from Greg KH: "Here is the big staging and iio driver update for 5.2-rc1. Lots of tiny fixes all over the staging and IIO driver trees here, along with some new IIO drivers. The "counter" subsystem was added in here as well, as it is needed by the IIO drivers and subsystem. Also we ended up deleting two drivers, making this pull request remove a few hundred thousand lines of code, always a nice thing to see. Both of the drivers removed have been replaced with "real" drivers in their various subsystem directories, and they will be coming to you from those locations during this merge window. There are some core vt/selection changes in here, that was due to some cleanups needed for the speakup fixes. Those have all been acked by the various subsystem maintainers (i.e. me), so those are ok. We also added a few new drivers, for some odd hardware, giving new developers plenty to work on with basic coding style cleanups to come in the near future. Other than that, nothing unusual here. All of these have been in linux-next for a while with no reported issues, other than an odd gcc warning for one of the new drivers that should be fixed up soon" [ I fixed up the warning myself - Linus ] * tag 'staging-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (663 commits) staging: kpc2000: kpc_spi: Fix build error for {read,write}q Staging: rtl8192e: Remove extra space before break statement Staging: rtl8192u: ieee80211: Fix if-else indentation warning Staging: rtl8192u: ieee80211: Fix indentation errors by removing extra spaces staging: most: cdev: fix chrdev_region leak in mod_exit staging: wlan-ng: Fix improper SPDX comment style staging: rtl8192u: ieee80211: Resolve ERROR reported by checkpatch staging: vc04_services: bcm2835-camera: Compress two lines into one line staging: rtl8723bs: core: Use !x in place of NULL comparison. staging: rtl8723bs: core: Prefer using the BIT Macro. staging: fieldbus: anybus-s: fix wait_for_completion_timeout return handling staging: kpc2000: fix up build problems with readq() staging: rtlwifi: move remaining phydm .h files staging: rtlwifi: strip down phydm .h files staging: rtlwifi: delete the staging driver staging: fieldbus: anybus-s: rename bus id field to avoid confusion staging: fieldbus: anybus-s: keep device bus id in bus endianness Staging: sm750fb: Change *array into *const array staging: rtl8192u: ieee80211: Fix spelling mistake staging: rtl8192u: ieee80211: Replace bit shifting with BIT macro ...
2019-05-03Merge tag 'usb-for-v5.2' of ↵Greg Kroah-Hartman1-0/+7
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: USB: changes for v5.2 merge window With a total of 50 non-merge commits, this is not a large pull request. Most of the changes are, again, in dwc2 (37%) and dwc3 (32%) with the rest of it scattered among other UDCs, function drivers and device-tree bindings. No really big feature this time around apart from support to Amlogic being added to both dwc3 and dwc2 drivers. * tag 'usb-for-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (50 commits) usb: dwc3: Rename DWC3_DCTL_LPM_ERRATA usb: dwc3: Fix default lpm_nyet_threshold value usb: dwc3: debug: Print GET_STATUS(device) tracepoint usb: dwc3: Do core validation early on probe usb: dwc3: gadget: Set lpm_capable usb: gadget: atmel: tie wake lock to running clock usb: gadget: atmel: support USB suspend usb: gadget: atmel_usba_udc: simplify setting of interrupt-enabled mask dwc2: gadget: Fix completed transfer size calculation in DDMA usb: dwc2: Set lpm mode parameters depend on HW configuration usb: dwc2: Fix channel disable flow usb: dwc2: Set actual frame number for completed ISOC transfer usb: gadget: do not use __constant_cpu_to_le16 usb: dwc2: gadget: Increase descriptors count for ISOC's usb: introduce usb_ep_type_string() function usb: dwc3: move synchronize_irq() out of the spinlock protected block usb: dwc3: Free resource immediately after use usb: dwc3: of-simple: Convert to bulk clk API usb: dwc2: Delayed status support usb: gadget: udc: lpc32xx: rework interrupt handling ...
2019-05-03ARM: dts: rockchip: Add quirk for resetting rk3288's dwc2 host on wakeupDouglas Anderson1-0/+1
The "host" USB port on rk3288 has a hardware errata where we've got to assert a PHY reset whenever we see a remote wakeup. Add that quirk property to the device tree. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-05-03ARM: dts: rockchip: Hook resets up to USB PHYs on rk3288.Douglas Anderson1-0/+6
Let's hook up the resets to the three USB PHYs on rk3288 as per the bindings. This is in preparation for a future patch that will set the "snps,reset-phy-on-wake" on the host port. Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-05-02Merge branch 'am5-sdio-fixes' into fixesTony Lindgren2-20/+21
2019-05-02ARM: dts: dra76x: Update MMC2_HS200_MANUAL1 iodelay valuesFaiz Abbas1-20/+20
Update the MMC2_HS200_MANUAL1 iodelay values to match with the latest dra76x data manual[1]. The new iodelay values will have better marginality and should prevent issues in corner cases. Also this particular pinctrl-array is using spaces instead of tabs for spacing between the values and the comments. Fix this as well. [1] http://www.ti.com/lit/ds/symlink/dra76p.pdf Cc: <stable@vger.kernel.org> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> [tony@atomide.com: updated description with a bit more info] Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-05-02ARM: dts: am57xx-idk: Remove support for voltage switching for SD cardFaiz Abbas1-0/+1
If UHS speed modes are enabled, a compatible SD card switches down to 1.8V during enumeration. If after this a software reboot/crash takes place and on-chip ROM tries to enumerate the SD card, the difference in IO voltages (host @ 3.3V and card @ 1.8V) may end up damaging the card. The fix for this is to have support for power cycling the card in hardware (with a PORz/soft-reset line causing a power cycle of the card). Since am571x-, am572x- and am574x-idk don't have this capability, disable voltage switching for these boards. The major effect of this is that the maximum supported speed mode is now high speed(50 MHz) down from SDR104(200 MHz). Cc: <stable@vger.kernel.org> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-05-02bus: ti-sysc: Handle devices with no control registersTony Lindgren2-8/+0
Some interconnect target modules have no module control registers at all, such as d_can on am335x and am437x. The d_can register offset at 0 is CTL register with 0x401 as the default value. I guess I mistook the 0x401 value for a revision register as the value happens to look similar to what the revision registers typically have for other modules. To handle modules with no control registers, we need to improve the ti-sysc driver a bit to bail out with errors on no control registers, and then we can remove the bogus revision registers for d_can. Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-05-02ARM: dts: Configure osc clock for d_can on am335xTony Lindgren1-4/+6
Reading the module revision register can cause an external abort on non-linefetch depending of osc clock is not already enabled. This started happening with commit 1a5cd7c23cc5 ("bus: ti-sysc: Enable all clocks directly during init to read revision") as reported by Sebastian Andrzej Siewior <bigeasy@linutronix.de>. The reason why the issue happens is because we now attempt to read the interconnect target module revision register by first manually enabling all the device clocks in sysc_probe(). And looks like d_can also needs the osc clock in addition to the module clock, and it may or may not be enabled depending on the bootloader version and if other devices have already requested osc clock. Let's fix the issue by adding osc clock as an optional clock for the module for am335x. Note that am437x does not seem to list the osc clock at all, so presumably it is not needed for am437x. I also noticed that we're incorrectly assuming the revision register for d_can exists. But the module does not seem to have any revision, sysconfig or sysstatus registers. But that's mostly a cosmetic issues, so I'll send a patch separately for that. Fixes: 1a5cd7c23cc5 ("bus: ti-sysc: Enable all clocks directly during init to read revision") Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-30ARM: dts: logicpd-som-lv: Fix MMC1 card detectAdam Ford1-1/+1
The card detect pin was incorrectly using IRQ_TYPE_LEVEL_LOW instead of GPIO_ACTIVE_LOW when reading the state of the CD pin. This was previosly fixed on Torpedo, but missed on the SOM-LV Fixes: 5cb8b0fa55a9 ("ARM: dts: Move most of logicpd-som-lv-37xx-devkit.dts to logicpd-som-lv-baseboard.dtsi") Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-29Merge tag 'lpc32xx-dt-for-5.2' of ↵Olof Johansson3-18/+24
https://github.com/vzapolskiy/linux-lpc32xx into arm/dt ARM: lpc32xx: devicetree updates for v5.2 Here are the changes for ARM NXP LPC32xx devicetree files: * disabled I2S and MAC controllers by default, * set default #address-cells = <1> / #size-cells = <0> for SPI slaves, * fix notation of hexadecimal values, * switched lpc32xx.dtsi to SPDX license identifier. * tag 'lpc32xx-dt-for-5.2' of https://github.com/vzapolskiy/linux-lpc32xx: ARM: dts: lpc32xx: use SPDX license identifier ARM: dts: lpc32xx: add address and size cell values to SPI controller nodes ARM: dts: lpc32xx: disable MAC controller by default ARM: dts: lpc32xx: disable I2S controllers by default ARM: dts: lpc32xx: change hexadecimal values to lower case Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-29Merge tag 'ixp4xx-for-armsoc' of ↵Olof Johansson7-0/+349
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/soc This modernizes the IXP4xx platform and adds initial Device Tree Support. We migrate to MULTI_IRQ_HANDLER, bumps the IRQs to offset 16, converts to SPARSE_IRQ, then we add proper subsystem drivers in each subsystem for irqchip, GPIO and clocksource and switch over to using these new drivers. Next we modernize the NPE and QMGR drivers and push them down into drivers/soc. This has been tested on the IXP4xx NSLU2 and the Gateworks GW2358-4. * tag 'ixp4xx-for-armsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: (31 commits) ARM: dts: Add queue manager and NPE to the IXP4xx DTSI soc: ixp4xx: qmgr: Add DT probe code soc: ixp4xx: qmgr: Add DT bindings for IXP4xx qmgr soc: ixp4xx: npe: Add DT probe code soc: ixp4xx: Add DT bindings for IXP4xx NPE soc: ixp4xx: qmgr: Pass resources soc: ixp4xx: Remove unused functions soc: ixp4xx: Uninline several functions soc: ixp4xx: npe: Pass addresses as resources ARM: ixp4xx: Turn the QMGR into a platform device ARM: ixp4xx: Turn the NPE into a platform device ARM: ixp4xx: Move IXP4xx QMGR and NPE headers ARM: ixp4xx: Move NPE and QMGR to drivers/soc ARM: dts: Add some initial IXP4xx device trees ARM: ixp4xx: Add device tree boot support ARM: ixp4xx: Add DT bindings gpio: ixp4xx: Add OF probing support gpio: ixp4xx: Add DT bindings clocksource/drivers/ixp4xx: Add OF initialization support clocksource/drivers/ixp4xx: Add DT bindings ... Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-29Merge tag 'omap-for-v5.2/soc-signed' of ↵Olof Johansson1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/soc SoC changes for omap variants for v5.2 merge window This series of changes mostly consists of ti-sysc interconnect driver related preparation work. With these changes and the related ti-sysc driver changes, we can start dropping legacy omap_hwmod_*data.c platform data for many devices. There are also two am335x and am437x related PM changes for secure devices that have ROM handling some parts and needs EFUSE power domain active. * tag 'omap-for-v5.2/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: pm33xx-core: Do not Turn OFF CEFUSE as PPA may be using it ARM: OMAP2+: Wakeupgen: AM43xx HS devices should save context like non-HS ARM: OMAP2+: Handle reset quirks for dynamically allocated modules ARM: OMAP2+: Remove hwmod .rev data and use local SoC checks instead ARM: OMAP2+: Allocate struct omap_hwmod based on dts data ARM: OMAP2+: Define _HWMOD_STATE_DEFAULT and use it ARM: OMAP2+: Prepare class allocation for dynamically allocated modules ARM: OMAP2+: Make interconnect target module allocation functions static ARM: OMAP2+: Fix potentially uninitialized return value for _setup_reset() ARM: dts: Fix dcan clkctrl clock for am3 Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'imx-fixes-5.1-3' of ↵Olof Johansson2-2/+18
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes i.MX fixes for 5.1, round 3: - A fix on LS1021A-TWR board that SGMII PCS link remains down for eTSEC0 upon an ifdown/ifup sequence. * tag 'imx-fixes-5.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: ls1021: Fix SGMII PCS link remaining down after PHY disconnect Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'sunxi-fixes-for-5.1' of ↵Olof Johansson1-0/+2
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into fixes Allwinner fixes for 5.1 - Pinctrl related fixes for the A33 NAND controller - Fix the refcounting of DT nodes in our core code - Fix for a typo'd DT property * tag 'sunxi-fixes-for-5.1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sun8i: a33: Reintroduce default pinctrl muxing arm64: dts: allwinner: a64: Rename hpvcc-supply to cpvdd-supply ARM: sunxi: fix a leaked reference by adding missing of_node_put ARM: sunxi: fix a leaked reference by adding missing of_node_put Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'imx-fixes-5.1-2' of ↵Olof Johansson13-13/+15
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes i.MX fixes for 5.1, round 2: - A couple of imx6q-logicpd device tree fixes to reduce inrush current, so that the board can always work properly. - Fix buggy device trees that use AR803X to set up phy-mode as rgmii-id. These device trees are broken since day one, and the bug gets exposed by the AR803X phy driver changes. i.MX community agreed to fix those broken device trees rather than supporting messy back compatibility in driver code. * tag 'imx-fixes-5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx6q-logicpd: Reduce inrush current on USBH1 ARM: dts: imx6q-logicpd: Reduce inrush current on start ARM: dts: imx: Fix the AR803X phy-mode Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'samsung-dt-5.2-2' of ↵Olof Johansson7-89/+100
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt Samsung DTS ARM changes for v5.2, second round 1. DTC warning fixes: move timer and pmu nodes outside of soc node, 2. Properly override MDMA0 on Universal C210, 3. Fix camera clock provider (to match bindings and driver) on Goni. * tag 'samsung-dt-5.2-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: s5pv210: Fix camera clock provider on Goni board ARM: dts: exynos: Properly override node to use MDMA0 on Universal C210 ARM: dts: exynos: Move fixed-clocks out of soc on Exynos3250 ARM: dts: exynos: Remove unneeded address/size cells from fixed-clock on Exynos3250 ARM: dts: exynos: Move pmu and timer nodes out of soc Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28ARM: dts: gemini: Indent DIR-685 partition tableLinus Walleij1-38/+44
It is discouraged to have OF partitions as subnodes directly under the device, create a "partitions" subnode and put the partitions inside it. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'qcom-dts-for-5.2-1' of ↵Olof Johansson1-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into arm/dt Qualcomm Device Tree Changes for v5.2 - Part 2 * Add cxo_board as ref clk for DSI phy * tag 'qcom-dts-for-5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: ARM: dts: qcom-apq8064: Set 'cxo_board' as ref clock of the DSI PHY Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'v5.2-rockchip-dts32-2' of ↵Olof Johansson40-838/+851
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt Much love for rk3288 in general (power coefficients for the scheduler) and veyron chromeos devices in particular (regulators, suspend, cleanups) and bulk conversion of the remaining gpios to the helper constants denoting the iomux. * tag 'v5.2-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: vdd_gpu off in suspend for rk3288-veyron ARM: dts: rockchip: vcc33_ccd off in suspend for rk3288-veyron-chromebook ARM: dts: rockchip: Add DDR retention/poweroff to rk3288-veyron hogs ARM: dts: rockchip: Add dynamic-power-coefficient for rk3288 ARM: dts: rockchip: bulk convert gpios to their constant counterparts ARM: dts: rockchip: Add BT_EN to the power sequence for veyron ARM: dts: rockchip: Remove unnecessary setting of UART0 SCLK rate on veyron Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28dt-bindings: hwmon (pwm-fan) Remove dead "cooling-*-state" propertiesRobin Murphy4-8/+0
The old "cooling-{min,max}-state" properties for thermal bindings were ratified to "cooling-{min,max}-level" by commit eb168b70dea5 ("of: thermal: Fix inconsitency between cooling-*-state and cooling-*-level"), which were later removed entirely by commit e04907dbc259 ("dt-bindings: thermal: Remove "cooling-{min|max}-level" properties"). The pwm-fan binding, however, was apparently in-flight in parallel with that ratification, and so managed to introduce an example of the old properties which escaped the scope of the later cleanup and has thus continued to be dutifully copied for new boards despite being useless. Clean up these remaining undocumented anachronisms to minimise any further confusion. Acked-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Shawn Guo <shawnguo@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'mvebu-dt-5.2-1' of git://git.infradead.org/linux-mvebu into arm/dtOlof Johansson1-0/+2
mvebu dt for 5.2 (part 1) - Add interrupt support for wathdog on Armada 38x * tag 'mvebu-dt-5.2-1' of git://git.infradead.org/linux-mvebu: ARM: dts: armada-38x: add interrupts for watchdog Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge branch 'at91-dt' of ↵Olof Johansson13-497/+70
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt * 'at91-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: at91-vinco: use SPDX-License-Identifier ARM: dts: atmel boards: use SPDX-License-Identifier ARM: dts: at91sam9xe: use SPDX-License-Identifier ARM: dts: sama5d{2,4}: use SPDX-License-Identifier ARM: dts: at91: sama5d2_xplained: Add proper regulator states for suspend-to-mem ARM: dts: at91: sama5d2: add labels to soc dtsi for derivative boards Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'qcom-dts-for-5.2' of ↵Olof Johansson5-2/+6
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into arm/dt Qualcomm Device Tree Changes for v5.2 * Add gpio ranges for Qualcomm platforms * Correct the IPQ4019 PCIe BAR range * tag 'qcom-dts-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: ARM: dts: qcom: ipq4019: enlarge PCIe BAR range ARM: dts: qcom: pma8084: add gpio-ranges ARM: dts: qcom: msm8660: add gpio-ranges ARM: dts: qcom: mdm9615: add gpio-ranges ARM: dts: qcom: apq8064: add gpio-ranges Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'imx-dt-5.2' of ↵Olof Johansson49-301/+3810
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX arm device tree update for 5.2: - New board support: imx50-kobo-aura, imx53-m53menlo, imx6dl-eckelmann, imx7d-mba7, imx7d-zii-rpu2, and vf610-zii-spb4. - Add i2c, mmc and spi aliases for SoC i.MX35, i.MX50 and i.MX6SL. - Use new 'reset-gpios' property describing CODEC reset pin for board mx6qdl-zii-rdu2, imx6qdl-gw5903 and imx6qdl-var-dart. - Specify viewport count for PCIE block on SoC imx7d and imx6qdl. - Correct 'ipg' clock of SDMA device for i.MX5, i.MX6 and i.MX7 SoCs. - Rename MMDC memory controller device to be generic and add MMDC device for imx7ulp SoC. - Add OCOTP device support for imx7ulp SoC. - Improve ZII board DTS by switching to SPDX identifier and using generic device node name. - A series from Rui Miguel Silva to add various media related devices for i.MX7 SoC, and enable ov2680 sensor support for imx7s-warp board. - Random small updates on various board support. * tag 'imx-dt-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (59 commits) ARM: dts: imx7s: Specify #io-channel-cells in ADC nodes ARM: dts: vf610-zii-dev-rev-b: Specify CS as GPIO_ACTIVE_LOW in spi0 ARM: dts: vf610-zii-dev: Mark i2c0 SCL as GPIO_OPEN_DRAIN ARM: dts: Add support for ZII i.MX7 RPU2 board ARM: dts: bugfix tqma7 soft reset issue ARM: dts: imx53: Add Menlosystems M53 board ARM: dts: imx53: Rename M53 SoM touchscreen node ARM: dts: imx6dl-sabreauto: update opp table for auto part ARM: dts: imx: Use generic node names for Zii dts ARM: dts: imx: Switch Zii dts to SPDX identifier ARM: dts: imx6q-logicpd: Shutdown LCD regulator during suspend ARM: dts: imx6q-logicpd: Enable Analog audio capture ARM: dts: imx6sll: add cooling-cells for cpu-freq cooling device ARM: dts: imx50: Add Kobo Aura DTS ARM: dts: imx6qdl-var-dart: Use new CODEC reset pin name ARM: dts: imx6qdl-gw5903: Use new CODEC reset pin name ARM: dts: mx6qdl-zii-rdu2: Use new CODEC reset pin name ARM: dts: imx50: Specify IMX5_CLK_IPG as "ahb" clock to SDMA ARM: dts: imx51: Specify IMX5_CLK_IPG as "ahb" clock to SDMA ARM: dts: imx53: Specify IMX5_CLK_IPG as "ahb" clock to SDMA ... Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'amlogic-dt-2' of ↵Olof Johansson5-0/+47
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt ARM: dts: Amlogic updates for v5.2, round 2 - enable RTC on odroid-c1, ec100 - meson8: add internal clock measurer * tag 'amlogic-dt-2' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM: dts: meson8b: odroid-c1: prepare support for the RTC ARM: dts: meson8b: ec100: enable the RTC ARM: dts: meson: add support for the RTC Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'renesas-arm-dt-for-v5.2' of ↵Olof Johansson10-5/+597
https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/dt Renesas ARM Based SoC DT Updates for v5.2 * R-Car E2 (r8a7794) based Alt board - Enable USB and DA9063 PMIC * R-Car V2H (R8A77920) based Blanche board - Enable IIC3 and DA9063 PMIC * RZ/G1C (r8a77470) based iWave SBC - Enable HDMI, USB Phy[01], USB2.0 Host and HS-USB * RZ/G1C (r8a77470) SoC - Describe DU, VIN, PWM and HSCIF, USB PHY, USB2.0 Host and HSUSB in DT * RZ/A1H (R7S7210) based rskrza1 board - Enable remaining LEDs and I2C * R-Mobile A1 (r8a7740) based ape6evm, R-Car H1 (r8a7779) based marzen, R-Car M1A (R8A7778) based bockw and Emma Mobile EV2 based kzm9d boads - Tidy up bootargs * R-Mobile A1 (r8a7740) based ape6evm - Enable NOR FLASH * tag 'renesas-arm-dt-for-v5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (21 commits) ARM: dts: ape6evm: Reorder bootargs ARM: dts: marzen: Add rw to bootargs and use ip=dhcp ARM: dts: bockw: Reorder bootargs ARM: dts: kzm9d: Add rw parameter to bootargs ARM: dts: iwg23s-sbc: Enable HS-USB ARM: dts: r8a77470: Add HSUSB device nodes ARM: dts: iwg23s-sbc: Enable USB USB2.0 Host ARM: dts: r8a77470: Add USB2.0 Host (EHCI/OHCI) device ARM: dts: iwg23s-sbc: Enable USB Phy[01] ARM: dts: r8a77470: Add USB PHY DT support ARM: dts: r8a77470: Add VIN support ARM: dts: r8a77470: Add PWM support ARM: dts: r8a77470: Add HSCIF support ARM: dts: alt: Enable USB support ARM: dts: rskrza1: Add remaining LEDs ARM: dts: rskrza1: Add I2C support ARM: dts: iwg23s-sbc: Add HDMI support ARM: dts: r8a77470: Add DU support ARM: dts: ape6evm: Add NOR FLASH ARM: dts: alt: Add DA9063 PMIC node ... Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'sunxi-h3-h5-for-5.2' of ↵Olof Johansson19-58/+183
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt Allwinner H3/H5 changes for 5.2 Our usual bunch of changes shared between arm and arm64, the most notable one being: - Fix of improper usage of DT bindings, thanks to the DT validation - Add the SID for the H3 and H5 - New board: RerVision H3-DVK * tag 'sunxi-h3-h5-for-5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sun8i: mapleboard: Remove cd-inverted ARM: dts: sunxi: h3/h5: Remove useless phy-names from EHCI and OHCI ARM: dts: sun8i: h3: bluetooth for Banana Pi M2 Zero board ARM: dts: sun8i: h3: Add default dr_mode ARM: dts: sun8i: h3: Refactor the pinctrl node names ARM: dts: sunxi: h3/h5: Remove stale pinctrl-names entry ARM: dts: sunxi: h3/h5: Add device node for SID ARM: dts: sun8i-h3: Add support for the RerVision H3-DVK board Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'sunxi-dt-for-5.2' of ↵Olof Johansson73-954/+565
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt Allwinner DT changes for 5.2 This PR is pretty significant, but it been mostly about: - Fixing the DTC warnings in most of our DT. We're now down to 2 warnings, from several thousands. - Fixing a good number of minor issues, typos, and so on thanks to the DT validation tools - Describe the MBUS controller and the special DMA RAM mapping on the A13 - Add support for the LRADC on the A83t - Add support for the I2C bus used for the PMIC on the A33 - Start using the DT annotation /omit-if-no-ref/ on our pinctrl nodes * tag 'sunxi-dt-for-5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (65 commits) ARM: dts: sun8i: a83t: Enable USB OTG controller on some boards ARM: dtsi: axp81x: add USB power supply node ARM: dts: sun5i: Reorder pinctrl nodes ARM: dts: sun6i: i7: Remove useless property ARM: dts: sun4i: lime: Fix the USB PHY ID detect GPIO properties ARM: dts: sun4i: protab2: Remove stale pinctrl-names entry ARM: dts: sunxi: Remove useless phy-names from EHCI and OHCI ARM: dts: sun8i: v40: bananapi-m2-berry: Sort device node dereferences. ARM: dts: sun5i: Add the MBUS controller dt-bindings: sunxi: Add compatible for OrangePi 3 board ARM: dts: sun8i: a83t: Add I2C2 pinmux setting for PE pins dt-bindings: arm: sunxi: Add Beelink GS1 board ARM: dts: sun8i: tbs-a711: Add support for volume keys input ARM: dts: sunxi: Add R_LRADC support for A83T ARM: dts: sunxi: Improve A33 NAND transfers by using DMA ARM: dts: sun8i: tbs-a711: Enable UART2 (for NEO-6M GPS module) ARM: dts: sunxi: Remove useless pinctrl nodes ARM: dts: sunxi: Remove pinctrl groups setting bias ARM: dts: sunxi: Remove useless address and size cells ARM: dts: sunxi: Conform to DT spec for NAND controller ... Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'tegra-for-5.2-arm-dt' of ↵Olof Johansson9-115/+46
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt ARM: tegra: Device tree changes for v5.2-rc1 This contains a set of changes to move PLL power supplies to the XUSB pad controller, which is necessary to ensure the proper sequencing during boot. Other patches in this set clean up usage of SPDX license identifiers in device tree files as well as add support for the ACTMON hardware on Tegra30. * tag 'tegra-for-5.2-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: Add ACTMON support on Tegra30 ARM: tegra: venice2: Move PLL power supplies to XUSB pad controller ARM: tegra: nyan: Move PLL power supplies to XUSB pad controller ARM: tegra: jetson-tk1: Move PLL power supplies to XUSB pad controller ARM: tegra: apalis: Move PLL power supplies to XUSB pad controller ARM: tegra: Remove gratuitous parentheses in SPDX license identifier ARM: tegra: Convert to SPDX license tags for Tegra124 Apalis Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'omap-for-v5.2/dt-am3-signed' of ↵Olof Johansson36-1782/+1704
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt Add am335x pinmux defines and start using them This series of changes adds a new pinmux instance defines for am335x, and a new AM33XX_PADCONF macro. And then the rest of the series updates the dts files to use it. The reasons for doing this is the pinmux configuration has been hard to use and read. And we need to do this for eventually for moving to use values. This change is done one machine at a time, and can be easily reverted as needed in case of unexpected trouble. The old macro is still working, and we're planning to keep it around until we eventually change to use * tag 'omap-for-v5.2/dt-am3-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (38 commits) ARM: dts: am335x: wega: Replaced register offsets with defines ARM: dts: am335x: sl50: Replaced register offsets with defines ARM: dts: am335x: shc: Replaced register offsets with defines ARM: dts: am335x: sbc-t335: Replaced register offsets with defines ARM: dts: am335x: sancloud-bbe: Replaced register offsets with defines ARM: dts: am335x: phycore-som: Replaced register offsets with defines ARM: dts: am335x: pepper: Replaced register offsets with defines ARM: dts: am335x: pdu001: Replaced register offsets with defines ARM: dts: am335x: pcm-953: Replaced register offsets with defines ARM: dts: am335x: osd335x-common: Replaced register offsets with defines ARM: dts: am335x: osd3358-sm-red: Replaced register offsets with defines ARM: dts: am335x: nano: Replaced register offsets with defines ARM: dts: am335x: moxa-uc-8100-me-t: Replaced register offsets with defines ARM: dts: am335x: moxa-uc-2101: Replaced register offsets with defines ARM: dts: am335x: moxa-uc-2100-common: Replaced register offsets with defines ARM: dts: am335x: lxm: Replaced register offsets with defines ARM: dts: am335x: igep0033: Replaced register offsets with defines ARM: dts: am335x: icev2: Replaced register offsets with defines ARM: dts: am335x: evmsk: Replaced register offsets with defines ARM: dts: am335x: evm: Replaced register offsets with defines ... Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'socfpga_dts_updates_for_v5.2' of ↵Olof Johansson1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt SoCFPGA DTS updates for v5.2 - Add base support for Agilex platform - Add 'cap-mmc-highspeed' Stratix10 and 32-bit SoCFPGA platform - Increase Stratix10 QSPI support to 100 MHz * tag 'socfpga_dts_updates_for_v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: arm64: dts: agilex: Add initial support for Intel's Agilex SoCFPGA arm64: dts: stratix10: increase QSPI max frequency to 100MHz arm64: dts: stratix10: enable MMC highspeed support ARM: dts: socfpga: enable MMC highspeed support Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'ux500-dts-v5.2-armsoc' of ↵Olof Johansson3-11/+89
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into arm/dt Ux500 DTS changes for the v5.2 kernel cycle. - This adds the MCDE display controller and some displays. - The Lima MALI-400 driver is added to the kernel, so let's add this block to the Ux500 DTS file. * tag 'ux500-dts-v5.2-armsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: ARM: dts: Ux500: Add MCDE and Samsung display ARM: dts: ux500: Add Mali-400 Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'omap-for-v5.2/dt-ti-sysc-signed' of ↵Olof Johansson11-382/+1013
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt Devicetree changes for omap4 and 5 l4 abe interconnect This series of devicetree changes adds the l4 abe interconnect devices and moves the devices to their right places in the hierarchy similar to what we've already done for most l4 devices earlier. We first add a shared omap4-mcpdm.dtsi to make adding omap4-l4-abe.dtsi easier for the mcpdm changes. And as earlier, in case of unexpected trouble, devices can be probed the old way by moving one device at a time to the old place. This series of changes depends on the ti-sysc driver changes for handling the external optional clocks that the mcpdm relies on, and is based on the related ti-sysc driver changes. Note that this series does not depend on dropping of the leagcy platform data, but I already had those committed along with the ti-sysc driver changes and noticed too late. * tag 'omap-for-v5.2/dt-ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (44 commits) ARM: dts: Add l4 abe interconnect hierarchy and ti-sysc data for omap5 ARM: dts: Add l4 abe interconnect hierarchy and ti-sysc data for omap4 ARM: dts: Add common mcpdm dts file for omap4 bus: ti-sysc: Add generic enable/disable functions ARM: OMAP2+: Drop mcspi platform data for omap4 ARM: OMAP2+: Drop uart platform data for dra7 ARM: OMAP2+: Drop gpio platform data for dra7 ARM: OMAP2+: Drop i2c platform data for dra7 ARM: OMAP2+: Drop mmc platform data for dra7 ARM: OMAP2+: Drop uart platform data for omap5 ARM: OMAP2+: Drop gpio platform data for omap5 ARM: OMAP2+: Drop i2c platform data for omap5 ARM: OMAP2+: Drop mmc platform data for omap5 ARM: OMAP2+: Drop uart platform data for am33xx and am43xx ARM: OMAP2+: Drop gpio platform data for am33xx and am43xx ARM: OMAP2+: Drop i2c platform data for am33xx and am43xx ARM: OMAP2+: Drop mmc platform data for am330x and am43xx ARM: OMAP2+: Drop uart platform data for omap4 ARM: OMAP2+: Drop gpio platform data for omap4 ARM: OMAP2+: Drop i2c platform data for omap4 ... Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'omap-for-v5.2/dt-signed' of ↵Olof Johansson12-12/+122
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt Devicetree changes for omap variants This series of changes configures dra7 pcie x2 lane mode, configures am43xx-epos-evm regulators and keypad wakeup source, and uses standard reset-gpios instead of gpio-reset for n810. We also need to split dra7 dtsi files for properly supporting dra76x and am576 as some of the devices are different such as usb and pruss. * tag 'omap-for-v5.2/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: dra7: Separate AM57 dtsi files dt-binding: arm: omap: Add information for AM5748 ARM: dts: omap2420-n810: Use new CODEC reset pin name ARM: dts: am43xx-epos-evm: Add matrix keypad as wakeup source ARM: dts: am43xx-epos-evm: Keep DCDC3 regulator on in suspend to memory ARM: dts: am43xx-epos-evm: Keep DCDC5 and DCDC6 always on ARM: dts: dra7: Add properties to enable PCIe x2 lane mode Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'samsung-dt-5.2' of ↵Olof Johansson18-35/+477
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt Samsung DTS ARM changes for v5.2 1. Use proper ADC on Exynos4412. 2. Extend the Exynos5420 Arndale Octa board with: CPU cooling maps, unused regulators, ADC and UHS-I SD card support. Beside that adjust regulators to proper level and add always-on when needed. 3. Extend the Exynos5260: high speed I2C and proper external interrupts. Also fix shared external interrupt line and use better PLL for MMC clocks. 4. Fix audio recording (broken around v5.1) and microphone recording (since v4.14) on Exynos5422 Odroid XU3 boards. 5. Minor cleanups (stdout-path and bootargs). * tag 'samsung-dt-5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: exynos: Remove console argument from bootargs ARM: dts: exynos: Use stdout-path property instead of console in bootargs ARM: dts: exynos: Fix spelling mistake of EXYNOS5420 ARM: dts: exynos: Fix audio (microphone) routing on Odroid XU3 ARM: dts: exynos: Always enable necessary APIO_1V8 and ABB_1V8 regulators on Arndale Octa ARM: dts: exynos: Extend the eMMC node on Arndale Octa ARM: dts: exynos: Add support for UHS-I SD cards on Arndale Octa ARM: dts: exynos: Adjust ldo23 and ldo27 to lower levels on Arndale Octa ARM: dts: exynos: Fix audio routing on Odroid XU3 ARM: dts: exynos: Enable ADC on Arndale Octa ARM: dts: exynos: Fix interrupt for shared EINTs on Exynos5260 ARM: dts: exynos: Add interrupts for dedicated EINTs on Exynos5260 ARM: dts: exynos: Add high speed I2C ports for Exynos5260 ARM: dts: exynos: Use bustop PLL as the source for MMC clocks on Exynos5260 ARM: dts: exynos: Order nodes alphabetically in Arndale Octa ARM: dts: exynos: Add CPU cooling on Arndale Octa ARM: dts: exynos: Add unused PMIC regulators on Arndale Octa board ARM: dts: exynos: Use stdout path property on Arndale Octa board ARM: dts: exynos: Document regulator used by ADC on Odroid U3 ARM: dts: exynos: Use ADC for Exynos4x12 on Exynos4412 Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'stm32-dt-for-v5.2-1' of ↵Olof Johansson12-6/+964
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt STM32 DT updates for v5.2, round 1 Highlights: ---------- MPU part: - Add initial support of stm32mp157a-dk1 board: This board embeds a STM32MP157a SOC with AC package (TFBGA361, 148 ios) and 512MB of DDR3. Several connections are available on this boards: 4*USB2.0, 1*USB2.0 typeC, SDcard, RJ45, HDMI, Arduino connector, ... - Add initial support of stm32mp157c-dk2 board: This board is a "super-set" of stm32mp157a-dk1. It embeds a STM32MP157c SOC with AC package (TFBGA361, 148 ios) and 512MB of DDR3. Same connections than stm32mp157a-dk1 board are available. Display panel (otm8009a) and Murata wifi/BT combo is added. - Add and enable SD card support (MMCI variant) on stm32mp157c-ed1/ev1 and on stm32mp157a-dk1/dk2 boards. - Add and enable PMIC support (STPMIC1 chip) on stm32mp157c-ed1/ev1 and on stm32mp157a-dk1/dk2 boards. - Add and enable IPCC mailbox support on stm32mp157c-ed1/ev1 and on stm32mp157a-dk1/dk2 boards. - Add sysconfig clock support on stm32mp157c. - Add romem and temperature calibration support on stm32mp157c. - Add SPDIFRX support on stm32mp157c. - Enable CEC on stm32mp157a-dk1/dk2. MCU part: - Add and enable SD card support (MMCI variant) on stm32h743 eval and disco boards. - Add romem and temperature calibration support on stm32f429 (and so stm32f469). - Enable stm32f769 clock driver * tag 'stm32-dt-for-v5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (24 commits) ARM: dts: stm32: enable cec on stm32mp157a-dk1 board ARM: dts: stm32: add cec pins muxing on stm32mp157 ARM: dts: stm32: add ltdc pins muxing on stm32mp157 ARM: dts: stm32: add I2C sleep pins muxing on stm32mp157 ARM: dts: stm32: add power supply of otm8009a on stm32mp157c-dk2 ARM: dts: stm32: Enable STM32F769 clock driver ARM: dts: stm32: add stpmic1 support on stm32mp157a dk1 board ARM: dts: stm32: add stpmic1 support on stm32mp157c ed1 board ARM: dts: stm32: add spdfirx pins to stm32mp157c ARM: dts: stm32: add spdifrx support on stm32mp157c ARM: dts: stm32: Add romem and temperature calibration on stm32f429 ARM: dts: stm32: Add romem and temperature calibration on stm32mp157c ARM: dts: stm32: Add clock on stm32mp157c syscfg ARM: dts: stm32: enable IPCC mailbox support on STM32MP157a-dk1 ARM: dts: stm32: enable IPCC mailbox support on STM32MP157c-ed1 ARM: dts: stm32: add IPCC mailbox support on STM32MP157c ARM: dts: stm32: add sdmmc1 support on stm32mp157a dk1 board ARM: dts: stm32: add sdmmc1 support on stm32mp157c ed1 board ARM: dts: stm32: add sdmmc1 support on stm32mp157c ARM: dts: stm32: add sdmmc1 support on stm32h743i disco board ... Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'aspeed-5.2-devicetree' of ↵Olof Johansson8-5/+117
git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/dt ASPEED device tree updates for 5.2 - RTC and GFX DRM driver went upstream this cycle - Miscellaneous board updates for Facebook and IBM BMCs * tag 'aspeed-5.2-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed: ARM: dts: aspeed: Add RTC node ARM: dts: aspeed: witherspoon: Update BMC partitioning ARM: dts: aspeed: cmm: enable iio-hwmon-adc ARM: dts: aspeed: tiogapass: Enable VUART ARM: dts: aspeed-g5: Add video engine ARM: dts: aspeed: Enable the GFX IP ARM: dts: aspeed-g5: Add resets and clocks to GFX node ARM: dts: aspeed: witherspoon: Enable vhub ARM: dts: aspeed: palmetto: Fix flash_memory region ARM: dts: aspeed: ast2500: Update flash layout Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'v5.2-rockchip-dts32-1' of ↵Olof Johansson10-16/+203
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt Quite a bit of love for the rk3288-veyron chromeos devices and a number of cleanups for rk3288 from that area, hdmi support for the old rk3066 a small rv1108-eglin-r1 cleanup and wifi+hdmi-cec for the tinker board. * tag 'v5.2-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: enable vop0 and hdmi nodes to rk3066a-mk808 ARM: dts: rockchip: add rk3066 hdmi nodes ARM: dts: rockchip: Add device tree for rk3288-veyron-mighty dt-bindings: ARM: dts: rockchip: Add bindings for rk3288-veyron-mighty ARM: dts: rockchip: Add vdd_logic to rk3288-veyron ARM: dts: rockchip: Add dvs-gpios to rk3288-veyron-jerry ARM: dts: rockchip: Add rk3288-veyron-jerry rev 10-15 dt-bindings: ARM: dts: rockchip: Add rk3288-veyron-jerry rev 10-15 ARM: dts: rockchip: Fix gic/efuse sort ordering for rk3288 ARM: dts: rockchip: Enable WiFi on rk3288-tinker ARM: dts: rockchip: add grf reference in rk3288 tsadc node ARM: dts: rockchip: Enable HDMI CEC on rk3288-tinker-s ARM: dts: rockchip: remove disable-wp from rv1108-elgin-r1 emmc node Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'amlogic-dt' of ↵Olof Johansson3-0/+62
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt ARM: dts: Amlogic updates for v5.2 - add GPIO line names for odroid-c1 boards - support internal clock measure driver * tag 'amlogic-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM: dts: meson8b: odroidc1: add the GPIO line names ARM: dts: meson8b: add the internal clock measurer ARM: dts: meson8: add the internal clock measurer Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds1-1/+15
Pull ARM fixes from Russell King: "A small number of ARM fixes - Fix function tracer and unwinder dependencies so that we don't end up building kernels that will crash - Fix ARMv7M nommu initialisation (missing register initialisation) - Fix EFI decompressor entry (ensuring barrier instructions are enabled prior to use)" * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8857/1: efi: enable CP15 DMB instructions before cleaning the cache ARM: 8856/1: NOMMU: Fix CCR register faulty initialization when MPU is disabled ARM: fix function graph tracer and unwinder dependencies
2019-04-26ARM: dts: qcom-apq8064: Set 'cxo_board' as ref clock of the DSI PHYMatthias Kaehlcke1-2/+3
Add 'xo_board' as ref clock for the DSI PHY, it was previously hardcoded in the PLL 'driver' for the 28nm 8960 PHY. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Andy Gross <agross@kernel.org>
2019-04-25LS1021A: dtsi: add ftm quad decoder entriesPatrick Havelange1-0/+28
Add the 4 Quadrature counters for this board. Reviewed-by: Esben Haabendal <esben@haabendal.dk> Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-24ARM: dts: s5pv210: Fix camera clock provider on Goni boardKrzysztof Kozlowski2-5/+3
The camera driver (according also to bindings) registers a clock provider if clock-output-names property is present and later the sensors use registered clocks. The DTS for S5Pv210 Goni board was incorrectly adding a child node with clock output cells but without clock-output-names property. Although the DTS was compiling (with "/soc/camera/clock-controller: missing or empty reg/ranges property" warning), the clock provider was not registered. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-04-24ARM: dts: exynos: Properly override node to use MDMA0 on Universal C210Krzysztof Kozlowski2-2/+17
The Universal C210 (Exynos4210) uses the secure interface of MDMA0, instead of regular one - non-secure MDMA1. DTS was overriding MDMA1 node address which caused DTC W=1 warning: arch/arm/boot/dts/exynos4.dtsi:707.25-716.6: Warning (simple_bus_reg): /soc/amba/mdma@12850000: simple-bus unit address format error, expected "12840000" Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-04-24ARM: dts: exynos: Move fixed-clocks out of soc on Exynos3250Krzysztof Kozlowski1-29/+29
The three fixed-clocks (xusbxti, xxti and xtcxo) are inputs to the Exynos3250 therefore they should not be inside the soc node. This also fixes DTC W=1 warning: arch/arm/boot/dts/exynos3250.dtsi:112.21-139.5: Warning (simple_bus_reg): /soc/fixed-rate-clocks: missing or empty reg/ranges property Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-04-24ARM: dts: exynos: Remove unneeded address/size cells from fixed-clock on ↵Krzysztof Kozlowski1-2/+0
Exynos3250 xusbxti fixed-clock should not have address/size cells because it does not have any children. This also fixes DTC W=1 warning: arch/arm/boot/dts/exynos3250.dtsi:112.21-139.5: Warning (simple_bus_reg): /soc/fixed-rate-clocks: missing or empty reg/ranges property Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-04-24ARM: dts: exynos: Move pmu and timer nodes out of socKrzysztof Kozlowski4-51/+51
The ARM PMU and ARM architected timer nodes are part of ARM CPU design therefore they should not be inside the soc node. This also fixes DTC W=1 warnings like: arch/arm/boot/dts/exynos3250.dtsi:106.21-135.5: Warning (simple_bus_reg): /soc/fixed-rate-clocks: missing or empty reg/ranges property arch/arm/boot/dts/exynos3250.dtsi:676.7-680.5: Warning (simple_bus_reg): /soc/pmu: missing or empty reg/ranges property Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-06 17:33:06 +0300