summaryrefslogtreecommitdiff
path: root/arch/arm/boot
AgeCommit message (Collapse)AuthorFilesLines
2021-01-25ARM: dts: qcom: ipq4019: add SDHCI VQMMC LDO nodeRobert Marko1-0/+10
Since we now have driver for the SDHCI VQMMC LDO needed for I/0 voltage levels lets introduce the necessary node for it. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr> Link: https://lore.kernel.org/r/20200907101937.10155-1-robert.marko@sartura.hr Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-01-25ARM: dts: stm32: Rename mmc controller nodes to mmc@Marek Vasut4-7/+7
Per mmc-controller.yaml, the node pattern is "^mmc(@.*)?$" , so adjust the node. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Ludovic Barre <ludovic.barre@st.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: linux-stm32@st-md-mailman.stormreply.com Cc: devicetree@vger.kernel.org Acked-by: Yann Gautier <yann.gautier@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-01-25ARM: dts: stm32: Enable voltage translator auto-detection on DHCOMMarek Vasut1-1/+6
The DHCOM SoM uSD slot has an optional voltage level translator, add DT bindings which permit the MMCI driver to detect the translator automatically. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Ludovic Barre <ludovic.barre@st.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: linux-stm32@st-md-mailman.stormreply.com Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-01-25ARM: dts: stm32: Add additional init state for SDMMC1 pinsMarek Vasut1-0/+23
Add "init" mux option for SDMMC1, where the CMD, CK, CKIN lines are not configured, so they can be claimed as GPIOs early on in driver probe(). This is used for probing optional voltage level translator. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Ludovic Barre <ludovic.barre@st.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: linux-stm32@st-md-mailman.stormreply.com Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-01-25ARM: dts: omap4-droid4: Fix lost keypad slide interrupts for droid4Tony Lindgren1-0/+5
We may lose edge interrupts for gpio banks other than the first gpio bank as they are not always powered. Instead, we must use the padconf interrupt as that is always powered. Note that we still also use the gpio for reading the pin state as that can't be done with the padconf device. Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-01-25arm: dts: keystone: Harmonize DWC USB3 DT nodes nameSerge Semin2-3/+3
In accordance with the DWC USB3 bindings the corresponding node name is suppose to comply with the Generic USB HCD DT schema, which requires the USB nodes to have the name acceptable by the regexp: "^usb(@.*)?" . Make sure the "snps,dwc3"-compatible nodes are correctly named. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2021-01-25arm: dts: keystone: Correct DWC USB3 compatible stringSerge Semin2-2/+2
Syonpsys IP cores are supposed to be defined with "snps" vendor-prefix. Use it instead of the deprecated "synopsys" one. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2021-01-25Merge tag 'v5.11-rc5' of ↵Dave Airlie3-0/+13
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next Backmerge v5.11-rc5 into drm-next to clean up a bunch of conflicts we are dragging around. Signed-off-by: Dave Airlie <airlied@redhat.com>
2021-01-23Merge tag 'imx-fixes-5.11-2' of ↵Arnd Bergmann2-2/+11
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.11, round 2: - Fix pcf2127 reset for imx7d-flex-concentrator board. - Fix i.MX6 suspend with Thumb-2 kernel. - Fix ethernet-phy address issue on imx6qdl-sr-som board. - Fix GPIO3 `gpio-ranges` on i.MX8MP. - Select SOC_BUS for IMX_SCU driver to fix build issue. * tag 'imx-fixes-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: firmware: imx: select SOC_BUS to fix firmware build arm64: dts: imx8mp: Correct the gpio ranges of gpio3 ARM: dts: imx6qdl-sr-som: fix some cubox-i platforms ARM: imx: build suspend-imx6.S with arm instruction set ARM: dts: imx7d-flex-concentrator: fix pcf2127 reset Link: https://lore.kernel.org/r/20210119091949.GD4356@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-01-23ARM: dts: nomadik: Fix up MMC node namesLinus Walleij3-3/+3
Fix the node names for the MMC/SD card controller to conform to the standard node name mmc@.. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210122222038.2888747-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-01-23Merge tag 'ux500-dts-v5.12' of ↵Arnd Bergmann16-79/+1244
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt Ux500 DTS updates for the v5.12 kernel cycle: - A new DTS file for the Samsung GT-I9070 (Janice) - Fix up ADC channel name attributes - Add charger interrupts - Add thermistors to the HREF boards - Remove the non-existing AB8505 HW ADC IRQ - Push down the VMMCI setting to each board - Add the die temperature channel to teh AB8505 - Fix up the MMC host names to follow the standard naming convention * tag 'ux500-dts-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: ARM: dts: Fix up MMC host node names ARM: dts: ux500: Add die temperature to AB8505 ARM: dts: ux500: Push VMMCI down to each tree ARM: dts: ux500: Remove the GPADC HW IRQ ARM: dts: ux500: Add thermistors to the HREF ARM: dts: ux500: Add interrupts to charger ARM: dts: ux500: Fix channel names attributes ARM: dts: ux500: Add a device tree for Janice Link: https://lore.kernel.org/r/CACRpkdbn=P63V9aEO2wKu2DwvVUcbjwCEV_JvKwWZ0netT75ig@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-01-22ARM: dts: Fix up MMC host node namesLinus Walleij8-25/+25
The standard mandates that these nodes be named mmc@... not sdi_foo@... Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-22ARM: dts: qcom: replace status value "ok" by "okay"Adrian Schmutzler24-128/+128
While the DT parser recognizes "ok" as a valid value for the "status" property, it is actually mentioned nowhere. Use the proper value "okay" instead, as done in the majority of files already. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Link: https://lore.kernel.org/r/20200830191643.20717-1-freifunk@adrianschmutzler.de [bjorn: Rebased and included fixup of sdx55-mtp] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-01-22ARM: dts: qcom: add additional DT labels in qcom-ipq8064.dtsiAdrian Schmutzler1-12/+11
This adds some additional DT labels which are handy when referring to the nodes in derived DTS(I) files. It will also make the definitions more consistent, e.g. by adding gsbi2_serial and gsbi5_serial where we previously "only" had gsbi4_serial defined. While at it, add missing spaces after some DT labels and remove one useless empty line. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Link: https://lore.kernel.org/r/20200902165159.7733-1-freifunk@adrianschmutzler.de Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-01-22ARM: dts: qcom: remove commented mmc-ddr-1_8v for sdcc3Adrian Schmutzler1-1/+0
This property appears to be commented out, so we can remove it as well. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Link: https://lore.kernel.org/r/20200902165159.7733-2-freifunk@adrianschmutzler.de Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-01-22ARM: dts: qcom: add Alfa Network AP120C-ACRobert Marko4-0/+311
ALFA Network AP120C-AC is a dual-band ceiling AP, based on Qualcomm IPQ4018 + QCA8075 platform. Specification: - Qualcomm IPQ4018 (717 MHz) - 256 MB of RAM (DDR3) - 16 MB (SPI NOR) + 128 or 512 MB (SPI NAND) of flash - 2x Gbps Ethernet, with 802.3af PoE support in one port - 2T2R 2.4/5 GHz (IPQ4018), with ext. FEMs (QFE1952, QFE1922) - 3x U.FL connectors - 1x 1.8 dBi (Bluetooth) and 2x 3/5 dBi dual-band (Wi-Fi) antennas - Atmel/Microchip AT97SC3205T TPM module (I2C bus) - TI CC2540 Bluetooth LE module (USB 2.0 bus) - 1x button (reset) - 1x USB 2.0 - DC jack for main power input (12 V) - UART header available on PCB (2.0 mm pitch) This adds DTS for both the generic and custom Bit edition for Sartura. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr> Link: https://lore.kernel.org/r/20200909195640.3127341-4-robert.marko@sartura.hr Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-01-22ARM: dts: qcom: add 8devices JalapenoRobert Marko2-0/+215
8devices Jalapeno is a dual-band SoM, based on Qualcomm IPQ4018 + QCA8072 platform. Specification: QCA IPQ4018, Quad core ARM v7 Cortex A7 717MHz 256 MB of DDR3 RAM 8 MB of SPI NOR flash 128 MB of Winbond SPI NAND flash WLAN1: Qualcomm Atheros QCA4018 2.4GHz 802.11bgn 2:2x2 WLAN2: Qualcomm Atheros QCA4018 5GHz 802.11a/n/ac 2:2x2 ETH: Qualcomm Atheros QCA8072 Gigabit Switch (1 x LAN, 1 x WAN) Signed-off-by: Robert Marko <robert.marko@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr> Link: https://lore.kernel.org/r/20200909195640.3127341-3-robert.marko@sartura.hr Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-01-22ARM: dts: qcom: ipq4019: add more labelsRobert Marko1-3/+3
Lets add labels to more commonly used nodes for easier modification in board DTS files. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr> Link: https://lore.kernel.org/r/20200909195640.3127341-2-robert.marko@sartura.hr Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-01-22ARM: dts: qcom: ipq4019: add USB devicetree nodesJohn Crispin1-0/+74
Since we now have driver for the USB PHY, and USB controller is already supported by the DWC3 driver lets add the necessary nodes to DTSI. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Robert Marko <robert.marko@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr> Reviewed-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20200909163831.1894142-1-robert.marko@sartura.hr Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-01-22ARM: dts: qcom: add prng definition to ipq806xJonathan McDowell1-0/+7
Add missing prng definition for ipq806x SoC Signed-off-by: Jonathan McDowell <noodles@earth.li> Link: https://lore.kernel.org/r/20200705142544.GA3389@earth.li Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-01-22ARM: dts: qcom: sdx55: Add pshold supportManivannan Sadhasivam1-0/+5
Add support for pshold block to drive pshold towards the PMIC, which is used to trigger a configurable event such as reboot or poweroff of the SDX55 platform. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210118051005.55958-7-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-01-22ARM: dts: qcom: sdx55: Add Watchdog supportManivannan Sadhasivam1-0/+6
Enable Watchdog support for Application Processor Subsystem (APSS) block on SDX55 platform. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210118051005.55958-6-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-01-22ARM: dts: qcom: sdx55-mtp: Enable USB3 and PHY supportManivannan Sadhasivam1-4/+25
Enable the support for USB3 controller, QMP PHY and HS PHY on SDX55 MTP. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210118051005.55958-4-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-01-22ARM: dts: qcom: sdx55: Add USB3 and PHY supportManivannan Sadhasivam1-0/+86
Add devicetree nodes for enabling USB3 controller, Qcom QMP PHY and SNPS HS PHY on SDX55. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210118051005.55958-3-manivannan.sadhasivam@linaro.org [bjorn: Added missing #power-domain-cells to &gcc] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-01-22ARM: mstar: Unify common parts of BreadBee boards into a dtsiDaniel Palmer3-0/+51
The BreadBee and the BreadBee Crust are the same PCB with a different SoC mounted. There are two top level dts to handle this. To avoid deduplicating the parts that are more related to the PCB than the SoC (i.e. the voltage regs and LEDs) add a common dtsi that can be included in both top level dts. Signed-off-by: Daniel Palmer <daniel@0x0f.com> Link: https://lore.kernel.org/r/20201224020354.2212037-1-daniel@0x0f.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-01-22Merge tag 'at91-dt-5.12' of ↵Arnd Bergmann7-8/+20
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt AT91 DT for 5.12: - removing a property never documented nor used - adding i2c recovery GPI for one more board * tag 'at91-dt-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: at91: sama5d2: remove atmel,wakeup-type references ARM: dts: at91-sama5d27_wlsom1: add i2c recovery Link: https://lore.kernel.org/r/20210122145056.171283-1-nicolas.ferre@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-01-22Merge tag 'socfpga_dts_update_for_v5.12' of ↵Arnd Bergmann1-2/+11
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt SoCFPGA DTS updates for v5.12 - Add DTS file for eASIC N5X platform - Use generic ngpios in GPIO entries - Add PMU node for Arria10 * tag 'socfpga_dts_update_for_v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: ARM: dts: arria10: add PMU node arm64: dts: n5x: Add support for Intel's eASIC N5X platform arm64: dts: socfpga: Use generic "ngpios" rather than "snps,nr-gpios" Link: https://lore.kernel.org/r/20210120012334.25730-1-dinguyen@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-01-22ARM: dts: at91: sama5d2: remove atmel,wakeup-type referencesClaudiu Beznea6-6/+0
atmel,wakeup-type DT property is not referenced anywhere in the current and previous version of the code thus remove it. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Nicolas Ferre <nferre@kernel.org> Link: https://lore.kernel.org/r/1609845525-10766-1-git-send-email-claudiu.beznea@microchip.com
2021-01-22ARM: dts: at91-sama5d27_wlsom1: add i2c recoveryNicolas Ferre1-2/+20
Add the i2c gpio pinctrls to support the i2c bus recovery on this board. Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Link: https://lore.kernel.org/r/20210117183558.5369-1-nicolas.ferre@microchip.com
2021-01-21ARM: dts: qcom: msm8974-klte: Fix shdc numberingAlexey Minnekhanov1-2/+2
Since commit fa2d0aa96941 ("mmc: core: Allow setting slot index via device tree alias") proper aliases should be named "mmcN". Signed-off-by: Alexey Minnekhanov <alexeymin@postmarketos.org> Link: https://lore.kernel.org/r/20210110185835.133059-1-alexeymin@postmarketos.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-01-20ARM: remove u300 platformArnd Bergmann2-466/+0
The Ericsson U300 platform was one of two ARM929 based SoC platforms for mobile phones in ST-Ericsson after the merger of Ericsson with ST-NXP into ST-Ericsson, the other one being the ST Nomadik. The platform was not widely adopted in Linux based systems and was replaced with the far superior ST-Ericsson U8500 in 2011, but Linus Walleij kept maintaining the code for the whole time. Linus continues to use the Nomadik machine, but decided to drop u300 from the kernel as part of this year's spring cleaning. Thanks for having maintained it all these years. Cc: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/lkml/CACRpkdbJkiHR9FSfJTH_5d_qRU1__dRXHM1TL40iqNRKbGQfrQ@mail.gmail.com/ Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-01-20ARM: remove tango platformArnd Bergmann4-285/+0
The smp8758 (tango4) SoC was the last generation of set-top-box chips to come out of Sigma Designs, and support was added by Marc Gonzalez and Måns Rullgård between 2015 and 2017, before the company went out of business and the products were abandoned. The chip is used in some set-top-boxes such as the Popcorn Hour A-500, which could have seen some adoption by hobbyists. This has not happened in the past four years, and support for the more widely used MIPS based SoCs was never merged at all. Thanks to Marc and Måns for maintaining for the past years even after the death of the platform. Cc: Marc Gonzalez <marc.w.gonzalez@free.fr> Cc: Mans Rullgard <mans@mansr.com> Link: https://lore.kernel.org/lkml/2d643ebc-09af-a809-eb3f-2aec8ecee501@free.fr/ Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-01-20ARM: remove zte zx platformArnd Bergmann3-191/+0
The ZTE ZX set-top-box SoC platform was added in 2015 by Jun Nie, with Baoyou Xie and Shawn Guo subsequently becoming maintainers after the addition of the 64-bit variant. However, the only machines that were ever supported upstream are the reference designs, not actual set-top-box devices that would benefit from this support. All ZTE set-top-boxes from the past few years seem to be based on third-party SoCs. While there is very little information about zx296702 and zx296718 on the web, I found some references to other chips from the same family, such as zx296716 and zx296719, which were never submitted for upstream support. Finally, there is no support for the GPU on either of them, with the lima and panfrost device drivers having been added after work on the zx platform had stopped. Shawn confirmed that he has not seen any interest in this platform for the past four years, and that it can be removed. Thanks to Jun and Shawn for maintaining this platform over the past five years. Cc: Jun Nie <jun.nie@linaro.org> Cc: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-01-20ARM: remove sirf prima2/atlas platformsArnd Bergmann7-3841/+0
The SiRF Prima2 and Atlas platform code was contributed by Cambridge Silicon Radio (CSR) after aquiring the original SiRF company, and maintained by Barry Song. CSR was subsequently acquired by Qualcomm, who no longer have an interest in maintaining the SoC platform but instead have released more recent SoCs for the same market in the Snapdragon family. As Barry is no longer working for the company, nobody else there wants to maintain it, and there are no third-party users, the best way forward seems to be to completely remove it. Thanks to Barry for maintaining the platform for the past ten years. Cc: Barry Song <baohua@kernel.org> Link: https://lore.kernel.org/lkml/c969392572604b98bcb3be44048c3165@hisilicon.com/ Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-01-18ARM: dts: rockchip: Add NFC node for RK3036 SoCYifeng Zhao1-0/+52
Add NAND FLASH Controller(NFC) node for RK3036 SoC. Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com> Link: https://lore.kernel.org/r/20201210002219.5739-4-yifeng.zhao@rock-chips.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-01-18ARM: dts: rockchip: Add NFC node for RK2928 and other SoCsYifeng Zhao1-0/+9
Add NAND FLASH Controller(NFC) node for RK2928, RK3066, RK3168 and RK3188 SoCs. Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com> Link: https://lore.kernel.org/r/20201210002219.5739-3-yifeng.zhao@rock-chips.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-01-18ARM: dts: rockchip: Add NFC node for RV1108 SoCYifeng Zhao1-0/+11
Add NAND FLASH Controller(NFC) node for RV1108 SoC. Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com> Link: https://lore.kernel.org/r/20201210002219.5739-2-yifeng.zhao@rock-chips.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-01-18ARM: dts: rockchip: rename thermal subnodes for rk3288Johan Jonker1-3/+3
A test with the command below gives for example this error: /arch/arm/boot/dts/rk3288-tinker.dt.yaml: thermal-zones: 'cpu_thermal', 'gpu_thermal', 'reserve_thermal' do not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-]{1,12}-thermal$', 'pinctrl-[0-9]+' Rename Rockchip rk3288 thermal subnodes so that it ends with "-thermal" make ARCH=arm dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/ thermal/thermal-zones.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20210117150953.16475-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-01-18ARM: dts: imx6: add wakeup support via magic packetJoakim Zhang3-0/+5
Add wakeup support via magic packet on i.MX platforms. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-18ARM: dts: sunxi: Fix CPU thermal zone node nameMaxime Ripard4-4/+4
The CPU thermal zone is called on most of the older DTSI cpu_thermal. However, the underscore is an invalid character for a node name and the thermal zone binding explicitly requires that zones are called *-thermal. Let's fix it. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Jernej Skrabec <jernej.skrabec@siol.net> Link: https://lore.kernel.org/r/20210114113538.1233933-8-maxime@cerno.tech
2021-01-18ARM: dts: sunxi: Add missing backlight supplyMaxime Ripard10-2/+10
The pwm-backlight binding requires a power supply. Make sure we provide one. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Jernej Skrabec <jernej.skrabec@siol.net> Link: https://lore.kernel.org/r/20210114113538.1233933-7-maxime@cerno.tech
2021-01-18ARM: dts: sunxi: Fix the LED node namesMaxime Ripard50-90/+88
According to the LED bindings, the LED node names are supposed to be led plus an optional suffix. Let's fix our users to use that new scheme. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Jernej Skrabec <jernej.skrabec@siol.net> Acked-by: Chen-Yu Tsai <wens@csie.org> Link: https://lore.kernel.org/r/20210114113538.1233933-6-maxime@cerno.tech
2021-01-18Merge tag 'omap-for-v5.11/dt-late-signed' into omap-for-v5.12-dtTony Lindgren8-23/+113
Late devicetree changes for omaps for v5.11 merge window Here are few more late changes that would be nice to get into v5.11: - More updates to use cpsw switchdev driver - Enable gta04 PMIC power management - Updates for dra7 for ECC support, 1.8GHz speed and keep the ldo0 regulator always on as specified in the data manual
2021-01-18ARM: dts: imx6qdl-sr-som: fix some cubox-i platformsRussell King1-2/+10
The PHY address bit 2 is configured by the LED pin. Attaching a LED to this pin is not sufficient to guarantee this configuration pin is correctly read. This leads to some platforms having their PHY at address 0 and others at address 4. If there is no phy-handle specified, the FEC driver will scan the PHY bus for a PHY and use that. Consequently, adding the DT configuration of the PHY and the phy properties to the FEC driver broke some boards. Fix this by removing the phy-handle property, and listing two PHY entries for both possible PHY addresses, so that the DT configuration for the PHY can be found by the PHY driver. Fixes: 86b08bd5b994 ("ARM: dts: imx6-sr-som: add ethernet PHY configuration") Reported-by: Christoph Mattheis <christoph.mattheis@arcor.de> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-18ARM: dts: imx: e60k02: add second uartAndreas Kemnade3-2/+30
There is another uart next to the console uart used by vendor uboot and kernel, enable it and document its location. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-18ARM: dts: imx6sl-tolino-shine3: correct console uart pinmuxAndreas Kemnade1-1/+1
Configuration was correct enough to work with the pre-configuration done by uboot. While at it, also document the location. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-18ARM: dts: imx6sl-tolino-shine2hd: add second uartAndreas Kemnade1-1/+14
There is another uart next to the console uart used by vendor uboot and kernel, enable it and document its location. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-18ARM: dts: imx6sl-tolino-shine2hd: correct console uart pinmuxAndreas Kemnade1-1/+2
Configuration was correct enough to work with the pre-configuration done by uboot. While at it, also document the location. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-18ARM: dts: imx7d-flex-concentrator: fix pcf2127 resetBruno Thomsen1-0/+1
RTC pcf2127 device driver has changed default behaviour of the watchdog feature in v5.11-rc1. Now you need to explicitly enable it with a device tree property, "reset-source", when used in the board design. Fixes: 71ac13457d9d ("rtc: pcf2127: only use watchdog when explicitly available") Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com> Cc: Bruno Thomsen <bth@kamstrup.com> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-18ARM: dts: add Kverneland TGO boardOleksij Rempel2-0/+853
VICTGO is the Kverneland TGO IsoBus universal terminal for agricultural applications on tractors Co-Developed-by: David Jander <david@protonic.nl> Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-30 10:12:39 +0300