summaryrefslogtreecommitdiff
path: root/arch/arm/boot
AgeCommit message (Collapse)AuthorFilesLines
2021-03-10ARM: dts: Configure interconnect target module for dra7 sataTony Lindgren2-15/+26
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" peroperty to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Note that the old sysc register offset is wrong, the real offset is at 0x1100 as listed in TRM for SATA_SYSCONFIG register. Looks like we've been happily using sata on the bootloader configured sysconfig register and nobody noticed. Also the old register range for SATAMAC_wrapper registers is wrong at 7 while it should be 8. But that too seems harmless. There is also an L3 parent interconnect range that we don't seem to be using. That can be added as needed later on. Tested-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-03-10ARM: OMAP2+: Drop legacy platform data for dra7 sataTony Lindgren1-1/+0
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-03-10ARM: dts: Configure interconnect target module for dra7 qspiTony Lindgren1-12/+29
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" peroperty to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Cc: Vignesh Raghavendra <vigneshr@ti.com> Tested-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-03-10ARM: OMAP2+: Drop legacy platform data for dra7 qspiTony Lindgren1-1/+0
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Cc: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-03-10ARM: dts: Move dra7 l3 noc to a separate nodeTony Lindgren1-5/+9
In order to prepare for probing l3 with genpd, we need to move l3 noc into a separate node for l3 interconnect to have it's own regs, and to avoid it claiming more than it needs for the io regions. Tested-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-03-10ARM: OMAP2+: Drop legacy platform data for dra7 pcieTony Lindgren1-3/+0
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Cc: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-03-10ARM: dts: Properly configure dra7 edma sysconfig registersTony Lindgren1-6/+27
Looks like the TRM is not listing the sysconfig for edma, let's add it based on am437x TRM edma registers as listed in sections "Table 10-26. EDMA3CC Registers" and "Table 10-99. EDMA3TC Registers". Tested-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-03-10ARM: dts: Configure interconnect target module for dra7 pcieTony Lindgren1-4/+30
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" peroperty to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Tested-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-03-10ARM: dts: Update pcie ranges for dra7Tony Lindgren1-11/+18
In order to update pcie to probe with ti-sysc and genpd, let's update the pcie ranges to not use address 0 for 0x20000000 and 0x30000000. The range for 0 is typically used for child devices as the offset from the module base. In the following patches, we will update pcie to probe with ti-sysc, and the patches become a bit confusing to read compared to other similar modules unless we update the ranges first. So let's just use the full addresses for ranges for the 0x20000000 and 0x30000000 ranges. Tested-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-03-10ARM: dts: rza2mevb: Upstream Linux requires SDRAMGeert Uytterhoeven1-23/+32
As upstream Linux does not support XIP (eXecute-In-Place) for ARMv7-A platforms that are part of the ARCH_MULTIPLATFORM framework, it cannot run in the 8 MiB of HyperRAM present on the RZ/A2M CPU board. Hence the 64 MiB of SDRAM on the sub-board needs to be enabled, which has the following ramifications: - SCIF4 connected to the on-board USB-serial can no longer be used as the serial console, - Instead, SCIF2 is used as the serial console, by connecting a 3.3V TTL USB-to-Serial adapter to the CMOS camera connector, - The first Ethernet channel can no longer be used, - USB Channel 1 loses the overcurrent input signal. Based on the Linux-4.19 BSP for RZ/A2. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Chris Brandt <chris.brandt@renesas.com> Link: https://lore.kernel.org/r/20210304094945.4003097-1-geert+renesas@glider.be
2021-03-09ARM: 9056/1: decompressor: fix BSS size calculation for LLVM ld.lldArd Biesheuvel1-2/+2
The LLVM ld.lld linker uses a different symbol type for __bss_start, resulting in the calculation of KBSS_SZ to be thrown off. Up until now, this has gone unnoticed as it only affects the appended DTB case, but pending changes for ARM in the way the decompressed kernel is cleaned from the caches has uncovered this problem. On a ld.lld build: $ nm vmlinux |grep bss_ c1c22034 D __bss_start c1c86e98 B __bss_stop resulting in $ readelf -s arch/arm/boot/compressed/vmlinux | grep bss_size 433: c1c86e98 0 NOTYPE GLOBAL DEFAULT ABS _kernel_bss_size which is obviously incorrect, and may cause the cache clean to access unmapped memory, or cause the size calculation to wrap, resulting in no cache clean to be performed at all. Fix this by updating the sed regex to take D type symbols into account. Link: https://lore.kernel.org/linux-arm-kernel/6c65bcef-d4e7-25fa-43cf-2c435bb61bb9@collabora.com/ Link: https://lore.kernel.org/linux-arm-kernel/20210205085220.31232-1-ardb@kernel.org/ Cc: <stable@vger.kernel.org> # v4.19+ Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Reported-by: Guillaume Tucker <guillaume.tucker@collabora.com> Reported-by: "kernelci.org bot" <bot@kernelci.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2021-03-08ARM: dts: sunxi: h2-plus-bananapi-m2-zero: Add HDMI outPieter Beers1-0/+25
Add HDMI out, including the display engine, to the BananaPi M2 Zero. Signed-off-by: Pieter Beers <pjbrs@floorenpj.xs4all.nl> Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210304191456.2895-2-pjbrs@floorenpj.xs4all.nl
2021-03-08Merge branch 'fixes-rc2' into fixesTony Lindgren287-6693/+11272
2021-03-08ARM: dts: Fix moving mmc devices with aliases for omap4 & 5Tony Lindgren2-0/+10
Fix moving mmc devices with dts aliases as discussed on the lists. Without this we now have internal eMMC mmc1 show up as mmc2 compared to the earlier order of devices. Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-03-08ARM: dts: Drop duplicate sha2md5_fck to fix clk_disable raceTony Lindgren1-8/+0
We have a duplicate legacy clock defined for sha2md5_fck that can sometimes race with clk_disable() with the dts configured clock for OMAP4_SHA2MD5_CLKCTRL when unused clocks are disabled during boot causing an "Unhandled fault: imprecise external abort". Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-03-08ARM: dts: renesas: Add mmc aliases into R-Car Gen2 board dts filesYoshihiro Shimoda6-0/+16
After set PROBE_PREFER_ASYNCHRONOUS flag on the mmc host drivers, the order of /dev/mmcblkN was not fixed in some SoCs which have multiple SDHI and/or MMCIF controllers. So, we were hard to use such a device as rootfs by using the kernel parameter like "root=/dev/mmcblkNpM". According to the discussion on a mainling list [1], we can add mmc aliases to fix the issue. So, add such aliases into R-Car Gen2 board dts files. Note that, since R-Car Gen2 is even more complicated about SDHI and/or MMCIF channels variations and they share pins, add the aliases into board dts files instead of SoC dtsi files. [1] https://lore.kernel.org/linux-arm-kernel/CAPDyKFptyEQNJu8cqzMt2WRFZcwEdjDiytMBp96nkoZyprTgmA@mail.gmail.com/ Fixes: 7320915c8861 ("mmc: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.14") Fixes: 21b2cec61c04 ("mmc: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.4") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/1613131316-30994-1-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-03-08ARM: dts: renesas: Group tuples in pin control propertiesGeert Uytterhoeven11-18/+18
To improve human readability and enable automatic validation, the tuples in "pinctrl-*" properties should be grouped using angle brackets. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20210204130517.1647073-4-geert+renesas@glider.be
2021-03-08ARM: dts: renesas: Group tuples in playback and capture propertiesGeert Uytterhoeven6-12/+12
To improve human readability and enable automatic validation, the tuples in "playback" and "capture" properties in sound device nodes should be grouped using angle brackets. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20210204130517.1647073-3-geert+renesas@glider.be
2021-03-08ARM: dts: renesas: Group tuples in APMU cpus propertiesGeert Uytterhoeven10-12/+12
To improve human readability and enable automatic validation, the tuples in "cpus" properties in device nodes for Advanced Power Management Units for AP-System Core (APMU) should be grouped using angle brackets. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20210204130517.1647073-2-geert+renesas@glider.be
2021-03-08ARM: dts: r8a7742-iwg21d-q7-dbcm-ca: Add support for 8-bit ov7725 sensorsLad Prabhakar2-1/+34
The 8-bit ov7725 sensors can also be connected to the camera daughter board. This patch creates a separate dtsi file to describe an ov7725 sensor, and includes it multiple times in r8a7742-iwg21d-q7-dbcm-ca.dts. The user can (un)comment #include statements depending on the cameras connected. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> [geert: describe a single camera in the .dtsi, include multiple times] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20210122113424.2833127-3-geert+renesas@glider.be
2021-03-08ARM: dts: r8a7742-iwg21d-q7-dbcm-ca: Separate out ov5640 nodesLad Prabhakar2-80/+107
The camera daughter board can also be connected to 8-bit ov7725 sensors, so in preparation for configurable option to choose depending on the camera's connected separate out the ov5640 nodes in a dtsi file. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> [geert: describe a single camera in the .dtsi, include multiple times] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20210122113424.2833127-2-geert+renesas@glider.be
2021-03-07ARM: dts: exynos: add input clock to CMU in Exynos4412 OdroidKrzysztof Kozlowski1-0/+1
Commit 68605101460e ("ARM: dts: exynos: Add support for audio over HDMI for Odroid X/X2/U3") added assigned clocks under Clock Management Unit. However the dtschema expects "clocks" property if "assigned-clocks" are used. Add reference to input clock to silence the dtschema warnings: arch/arm/boot/dts/exynos4412-odroidu3.dt.yaml: clock-controller@10030000: 'clocks' is a dependency of 'assigned-clocks' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200906142146.21266-2-krzk@kernel.org
2021-03-07ARM: dts: s5pv210: correct fuel gauge interrupt trigger level on Fascinate ↵Krzysztof Kozlowski1-1/+1
family The Maxim fuel gauge datasheets describe the interrupt line as active low with a requirement of acknowledge from the CPU. The falling edge interrupt will mostly work but it's not correct. Fixes: 99bb20321f0e ("ARM: dts: s5pv210: Correct fuelgauge definition on Aries") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201210212534.216197-10-krzk@kernel.org
2021-03-07ARM: dts: exynos: correct PMIC interrupt trigger level on SnowKrzysztof Kozlowski1-1/+1
The Maxim PMIC datasheets describe the interrupt line as active low with a requirement of acknowledge from the CPU. Without specifying the interrupt type in Devicetree, kernel might apply some fixed configuration, not necessarily working for this hardware. Additionally, the interrupt line is shared so using level sensitive interrupt is here especially important to avoid races. Fixes: c61248afa819 ("ARM: dts: Add max77686 RTC interrupt to cros5250-common") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201210212534.216197-9-krzk@kernel.org
2021-03-07ARM: dts: exynos: correct PMIC interrupt trigger level on SMDK5250Krzysztof Kozlowski1-1/+1
The Maxim PMIC datasheets describe the interrupt line as active low with a requirement of acknowledge from the CPU. Without specifying the interrupt type in Devicetree, kernel might apply some fixed configuration, not necessarily working for this hardware. Additionally, the interrupt line is shared so using level sensitive interrupt is here especially important to avoid races. Fixes: 47580e8d94c2 ("ARM: dts: Specify MAX77686 pmic interrupt for exynos5250-smdk5250") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201210212534.216197-8-krzk@kernel.org
2021-03-07ARM: dts: exynos: correct PMIC interrupt trigger level on P4 Note familyKrzysztof Kozlowski1-1/+1
The Maxim PMIC datasheets describe the interrupt line as active low with a requirement of acknowledge from the CPU. Without specifying the interrupt type in Devicetree, kernel might apply some fixed configuration, not necessarily working for this hardware. Additionally, the interrupt line is shared so using level sensitive interrupt is here especially important to avoid races. Fixes: f48b5050c301 ("ARM: dts: exynos: add Samsung's Exynos4412-based P4 Note boards") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201210212534.216197-7-krzk@kernel.org
2021-03-07ARM: dts: exynos: correct PMIC interrupt trigger level on Odroid X/U3 familyKrzysztof Kozlowski1-1/+1
The Maxim PMIC datasheets describe the interrupt line as active low with a requirement of acknowledge from the CPU. Without specifying the interrupt type in Devicetree, kernel might apply some fixed configuration, not necessarily working for this hardware. Additionally, the interrupt line is shared so using level sensitive interrupt is here especially important to avoid races. Fixes: eea6653aae7b ("ARM: dts: Enable PMIC interrupts for exynos4412-odroid-common") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201210212534.216197-6-krzk@kernel.org
2021-03-07ARM: dts: exynos: correct PMIC interrupt trigger level on Midas familyKrzysztof Kozlowski1-1/+1
The Maxim PMIC datasheets describe the interrupt line as active low with a requirement of acknowledge from the CPU. Without specifying the interrupt type in Devicetree, kernel might apply some fixed configuration, not necessarily working for this hardware. Additionally, the interrupt line is shared so using level sensitive interrupt is here especially important to avoid races. Fixes: 15dfdfad2d4a ("ARM: dts: Add basic dts for Exynos4412-based Trats 2 board") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201210212534.216197-5-krzk@kernel.org
2021-03-07ARM: dts: exynos: correct MUIC interrupt trigger level on Midas familyKrzysztof Kozlowski1-1/+1
The Maxim MUIC datasheets describe the interrupt line as active low with a requirement of acknowledge from the CPU. Without specifying the interrupt type in Devicetree, kernel might apply some fixed configuration, not necessarily working for this hardware. Additionally, the interrupt line is shared so using level sensitive interrupt is here especially important to avoid races. Fixes: 7eec1266751b ("ARM: dts: Add Maxim 77693 PMIC to exynos4412-trats2") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201210212534.216197-4-krzk@kernel.org
2021-03-07ARM: dts: exynos: correct fuel gauge interrupt trigger level on Midas familyKrzysztof Kozlowski1-1/+1
The Maxim fuel gauge datasheets describe the interrupt line as active low with a requirement of acknowledge from the CPU. The falling edge interrupt will mostly work but it's not correct. Fixes: e8614292cd41 ("ARM: dts: Add Maxim 77693 fuel gauge node for exynos4412-trats2") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201210212534.216197-3-krzk@kernel.org
2021-03-07ARM: dts: exynos: correct fuel gauge interrupt trigger level on P4 Note familyKrzysztof Kozlowski1-1/+1
The Maxim fuel gauge datasheets describe the interrupt line as active low with a requirement of acknowledge from the CPU. The falling edge interrupt will mostly work but it's not correct. Fixes: f48b5050c301 ("ARM: dts: exynos: add Samsung's Exynos4412-based P4 Note boards") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201210212534.216197-2-krzk@kernel.org
2021-03-07ARM: dts: exynos: correct fuel gauge interrupt trigger level on GT-I9100Krzysztof Kozlowski1-1/+1
The Maxim fuel gauge datasheets describe the interrupt line as active low with a requirement of acknowledge from the CPU. The falling edge interrupt will mostly work but it's not correct. Fixes: 8620cc2f99b7 ("ARM: dts: exynos: Add devicetree file for the Galaxy S2") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201210212534.216197-1-krzk@kernel.org
2021-03-07ARM: dts: exynos: add charger supply for I9100Timon Baetz1-0/+2
The regulator is used for charging control by max8997_charger driver on GT-I9100 phone. Signed-off-by: Timon Baetz <timon.baetz@protonmail.com> Link: https://lore.kernel.org/r/20210130172747.2022977-3-timon.baetz@protonmail.com Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2021-03-06ARM: dts: sun4i: Add support for Topwise A721 tabletPascal Roeleven2-1/+244
The Topwise A721/LY-F1 tablet is a tablet sold around 2012 under different brands. The mainboard mentions A721 clearly, so this tablet is best known under this name. Signed-off-by: Pascal Roeleven <dev@pascalroeleven.nl> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210224105240.47754-3-dev@pascalroeleven.nl
2021-03-06ARM: dts: sunxi: Move wakeup-capable IRQs to r_intcSamuel Holland4-0/+14
All IRQs that can be used to wake up the system must be routed through r_intc, so they are visible to firmware while the system is suspended. In addition to the external NMI input, which is already routed through r_intc, these include PIO and R_PIO (gpio-keys), the LRADC, and the RTC. Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2021-03-06ARM: dts: sunxi: h3/h5: Add r_intc nodeSamuel Holland1-0/+9
The H3 and H5 SoCs have an additional interrupt controller in the RTC power domain that can be used to enable wakeup for certain IRQs. Add a node for it. Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2021-03-06ARM: dts: sunxi: Use the new r_intc bindingSamuel Holland20-24/+24
The binding of R_INTC was updated to allow specifying interrupts other than the external NMI, since routing those interrupts through the R_INTC driver allows using them for wakeup. Update the device trees to use the new binding. Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2021-02-24Merge branch 'for-linus' of ↵Linus Torvalds1-89/+4
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "Mostly existing driver fixes plus a new driver for game controllers directly connected to Nintendo 64, and an enhancement for keyboards driven by Chrome OS EC to communicate layout of the top row to userspace" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (47 commits) Input: st1232 - fix NORMAL vs. IDLE state handling Input: aiptek - convert sysfs sprintf/snprintf family to sysfs_emit Input: alps - fix spelling of "positive" ARM: dts: cros-ec-keyboard: Use keymap macros dt-bindings: input: Fix the keymap for LOCK key dt-bindings: input: Create macros for cros-ec keymap Input: cros-ec-keyb - expose function row physical map to userspace dt-bindings: input: cros-ec-keyb: Add a new property describing top row Input: applespi - fix occasional crc errors under load. Input: applespi - don't wait for responses to commands indefinitely. Input: st1232 - add IDLE state as ready condition Input: zinitix - fix return type of zinitix_init_touch() Input: i8042 - add ASUS Zenbook Flip to noselftest list Input: add missing dependencies on CONFIG_HAS_IOMEM Input: joydev - prevent potential read overflow in ioctl Input: elo - fix an error code in elo_connect() Input: xpad - add support for PowerA Enhanced Wired Controller for Xbox Series X|S Input: sur40 - fix an error code in sur40_probe() Input: elants_i2c - detect enum overflow Input: zinitix - remove unneeded semicolon ...
2021-02-23ARM: dts: cros-ec-keyboard: Use keymap macrosPhilip Chen1-89/+4
The common cros-ec keymap has been defined as macros. This patch uses the macros to simply linux,keymap in cros-ec-keyboard.dtsi file. This patch also creates an alias for keyboard-controller to make it easier to override the keymap in board-specific dts later. Signed-off-by: Philip Chen <philipchen@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20210115143555.v6.2.I9ec9c3c61eded22a5f7fbff838d23fc95ec7cfe0@changeid Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-02-23Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds3-10/+171
Pull ARM updates from Russell King: - Generalise byte swapping assembly - Update debug addresses for STI - Validate start of physical memory with DTB - Do not clear SCTLR.nTLSMD in decompressor - amba/locomo/sa1111 devices remove method return type is void - address markers for KASAN in page table dump * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 9065/1: OABI compat: fix build when EPOLL is not enabled ARM: 9055/1: mailbox: arm_mhuv2: make remove callback return void amba: Make use of bus_type functions amba: Make the remove callback return void vfio: platform: simplify device removal amba: reorder functions amba: Fix resource leak for drivers without .remove ARM: 9054/1: arch/arm/mm/mmu.c: Remove duplicate header ARM: 9053/1: arm/mm/ptdump:Add address markers for KASAN regions ARM: 9051/1: vdso: remove unneded extra-y addition ARM: 9050/1: Kconfig: Select ARCH_HAVE_NMI_SAFE_CMPXCHG where possible ARM: 9049/1: locomo: make locomo bus's remove callback return void ARM: 9048/1: sa1111: make sa1111 bus's remove callback return void ARM: 9047/1: smp: remove unused variable ARM: 9046/1: decompressor: Do not clear SCTLR.nTLSMD for ARMv7+ cores ARM: 9045/1: uncompress: Validate start of physical memory against passed DTB ARM: 9042/1: debug: no uncompress debugging while semihosting ARM: 9041/1: sti LL_UART: add STiH418 SBC UART0 support ARM: 9040/1: use DEBUG_UART_PHYS and DEBUG_UART_VIRT for sti LL_UART ARM: 9039/1: assembler: generalize byte swapping macro into rev_l
2021-02-22Merge tag 'drm-next-2021-02-19' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-0/+6
Pull drm updates from Dave Airlie: "A pretty normal tree, lots of refactoring across the board, ttm, i915, nouveau, and bunch of features in various drivers. docs: - lots of updated docs core: - require crtc to have unique primary plane - fourcc macro fix - PCI bar quirk for bar resizing - don't sent hotplug on error - move vm code to legacy - nuke hose only used on old oboslete alpha dma-buf: - kernel doc updates - improved lock tracking dp/hdmi: - DP-HDMI2.1 protocol converter support ttm: - bo size handling cleanup - release a pinned bo warning - cleanup lru handler - avoid using pages with drm_prime_sg_to_page_addr_arrays cma-helper: - prime/mmap fixes bridge: - add DP support gma500: - remove gma3600 support i915: - try eDP fast/narrow link again with fallback - Intel eDP backlight control - replace display register read/write macros - refactor intel_display.c - display power improvements - HPD code cleanup - Rocketlake display fixes - Power/backlight/RPM fixes - DG1 display fix - IVB/BYT clear residuals security fix again - make i915 mitigations options via parameter - HSW GT1 GPU hangs fixes - DG1 workaround hang fixes - TGL DMAR hang avoidance - Lots of GT fixes - follow on fixes for residuals clear - gen7 per-engine-reset support - HDCP2.2 + HDCP1.4 GEN12 DP MST support - TGL clear color support - backlight refactoring - VRR/Adaptive sync enabling on DP/EDP for TGL+ - async flips for all ilk+ amdgpu: - rework IH ring handling (Vega/Navi) - rework HDP handling (Vega/Navi) - swSMU updates for renoir/vangogh - Sienna Cichild overdrive support - FP16 on DCE8-11 support - GPU reset on navy flounder/vangogh - SMU profile fixes for APU - SR-IOV fixes - Vangogh SMU fixes - fan speed control fixes amdkfd: - config handling fix - buffer free fix - recursive lock warnings fix nouveau: - Turing MMU fault recovery fixes - mDP connectors reporting fix - audio locking fixes - rework engines/instances code to support new scheme tegra: - VIC newer firmware support - display/gr2d fixes for older tegra - pm reference leak fix mediatek: - SOC MT8183 support - decouple sub driver + share mtk mutex driver radeon: - PCI resource fix for some platforms ingenic: - pm support - 8-bit delta RGB panels vmwgfx: - managed driver helpers vc4: - BCM2711 DSI1 support - converted to atomic helpers - enable 10/12 bpc outputs - gem prime mmap helpers - CEC fix omap: - use degamma table - CTM support - rework DSI support imx: - stack usage fixes - drm managed support - imx-tve clock provider leak fix - rcar-du: - default mode fixes - conversion to managed API hisilicon: - use simple encoder vkms: - writeback connector support d3: - BT2020 support" * tag 'drm-next-2021-02-19' of git://anongit.freedesktop.org/drm/drm: (1459 commits) drm/amdgpu: Set reference clock to 100Mhz on Renoir (v2) drm/radeon: OLAND boards don't have VCE drm/amdkfd: Fix recursive lock warnings drm/amd/display: Add FPU wrappers to dcn21_validate_bandwidth() drm/amd/display: Fix potential integer overflow drm/amdgpu/display: remove hdcp_srm sysfs on device removal drm/amdgpu: fix CGTS_TCC_DISABLE register offset on gfx10.3 drm/i915/gt: Correct surface base address for renderclear drm/i915: Disallow plane x+w>stride on ilk+ with X-tiling drm/nouveau/top/ga100: initial support drm/nouveau/top: add ioctrl/nvjpg drm/nouveau/privring: rename from ibus drm/nouveau/nvkm: remove nvkm_subdev.index drm/nouveau/nvkm: determine subdev id/order from layout drm/nouveau/vic: switch to instanced constructor drm/nouveau/sw: switch to instanced constructor drm/nouveau/sec2: switch to instanced constructor drm/nouveau/sec: switch to instanced constructor drm/nouveau/pm: switch to instanced constructor drm/nouveau/nvenc: switch to instanced constructor ...
2021-02-21Merge tag 'arm-dt-v5.12' of ↵Linus Torvalds262-773/+11081
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC devicetree updates from Arnd Bergmann: "After the last release contained a surprising amount of new 32-bit machines, this time two thirds of the code changes are for 64-bit. The usual updates to existing files include: - Device tree compiler warning fixes for Berlin, Renesas, SoCFPGA, nomadik, stm32, Allwinner, TI Keystone - Support for additional devices on existing machines on Renesas, SoCFPGA, at91, hisilicon, OMAP, Tegra, TI K3, Allwinner, Broadcom, ux500, Mediatek, Marvell Armada, Marvell MMP, ZynqMP, AMLogic, Qualcomm, i.MX, Layerscape, Actions, ASpeed, Toshiba - Cleanups and minor fixes for Renesas, at91, mstar, ux500, Samsung, stm32, Tegra, Broadcom, Mediatek, Marvell MMP, AMLogic, Qualcomm, i.MX, Rockchip, ASpeed, Zynq Only three new SoCs this time, but a number of boards across: Renesas: - Two Beacon EmbeddedWorks boards (RZ/G2H and RZ/G2N based) Intel SoCFPGA: - eASIC N5X board (N5X) ST-Ericsson Ux500: - Samsung GT-I9070 (Janice) phone (u8500) TI OMAP: - MYIR Tech Limited development board (AM335X) Allwinner/sunxi: - SL631 Action Camera (V3) - PineTab Early Adopter tablet (A64) Broadcom: - BCM4906 networking chip - Netgear R8000P router (BCM4906) AMLogic: - Hardkernel ODROID-HC4 development board (SM1) - Beelink GS-King-X TV Box (S922X) Qualcomm: - Snapdragon 888 / SM8350 high-end phone SoC - Qualcomm SDX55 5G modem as standalone SoC - Snapdragon MTP reference board (SM8350) - Snapdragon MTP reference board (SDX55) - Sony Kitakami phones: Xperia Z3+/Z4/Z5 (APQ8094) - Alcatel Idol 3 phone (MSM8916) - ASUS Zenfone 2 Laser phone (MSM8916) - BQ Aquaris X5 aka Longcheer L8910 phone (MSM8916) - OnePlus6 phone (SDM845) - OnePlus6T phone (SDM845) - Alfa Network AP120C-AC access point (IPQ4018) NXP i.MX6 (32-bit): - Plymovent BAS base system controller for filter systems (imx6dl) - Protonic MVT industrial touchscreen terminals (imx6dl) - Protonic PRTI6G reference board (imx6ul) - Kverneland UT1, UT1Q, UT1P, TGO agricultural terminals (imx6q/dl/qp) NXP i.MX8 (64-bit) - Beacon i.MX8M Nano development kit (imx8mn) - Boundary Devices i.MX8MM Nitrogen SBC (imx8mm) - Gateworks Venice i.MX 8M Mini Development Kits (imx8mm) - phyBOARD-Pollux-i.MX8MP (imx8mp) - Purism Librem5 Evergreen phone (imx8mp) - Kontron SMARC-sAL28 system-on-module(imx8mp) Rockchip: - NanoPi M4B Single-board computer (RK3399) - Radxa Rock Pi E router SBC (RK3328) ASpeed: - Ampere Mt. Jade, a BMC for an x86 server (AST2500) - IBM Everest, a BMC for a Power10 server (AST2600) - Supermicro x11spi, a BMC for an ARM server (AST2500) Zynq: - Ebang EBAZ4205, FPGA board (Zynq-7000) - ZynqMP zcu104 revC reference platform (ZynqMP)" * tag 'arm-dt-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (584 commits) ARM: dts: aspeed: align GPIO hog names with dtschema ARM: dts: aspeed: fix PCA95xx GPIO expander properties on Portwell dt-bindings: spi: zynq: Convert Zynq QSPI binding to yaml arm: dts: visconti: Add DT support for Toshiba Visconti5 GPIO driver ARM: dts: aspeed: ast2600evb: Add enable ehci and uhci ARM: dts: aspeed: mowgli: Add i2c rtc device ARM: dts: aspeed: amd-ethanolx: Enable secondary LPC snooping address dt-bindings: arm: xilinx: Add missing Zturn boards ARM: dts: ebaz4205: add pinctrl entries for switches ARM: dts: add Ebang EBAZ4205 device tree dt-bindings: arm: add Ebang EBAZ4205 board dt-bindings: add ebang vendor prefix ARM: dts: aspeed: Add Everest BMC machine ARM: dts: aspeed: inspur-fp5280g2: Add ipsps1 driver ARM: dts: aspeed: inspur-fp5280g2: Add GPIO line names ARM: dts: aspeed: Add Supermicro x11spi BMC machine ARM: dts: aspeed: g220a: Fix some gpio ARM: dts: aspeed: g220a: Enable ipmb ARM: dts: aspeed: rainier: Add eMMC clock phase compensation ARM: dts: aspeed: Add LCLK to lpc-snoop ...
2021-02-21Merge tag 'arm-platform-removal-v5.12' of ↵Linus Torvalds19-5813/+0
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC platform removals from Arnd Bergmann: "There are a lot of platforms that have not seen any interesting code changes in the past five years or more. I made a list and asked around which ones are no longer in use, and received confirmation about six ARM platforms and the TI C6x architecture that have all reached the end of their life upstream, with no known users remaining: - efm32 - added in 2011, first Cortex-M, no notable changes after 2013 - picoxcell - added in 2011, abandoned after 2012 acquisition - prima2 - added in 20111, no notable changes since 2015 - tango - added in 2015, sporadic changes until 2017, but abandoned - u300 - added in 2009, no notable changes since 2013 - zx - added in 2015 for both 32, 2017 for 64 bit, no notable changes - arch/c6x - added in 2011, but work stalled soon after that A number of other platforms on the original list turned out to still have users. In some cases there are out-of-tree patches and users that plan to contribute them in the future, in other cases the code is complete and works reliably" Link: https://lore.kernel.org/lkml/CAK8P3a2DZ8xQp7R=H=wewHnT2=a_=M53QsZOueMVEf7tOZLKNg@mail.gmail.com/ * tag 'arm-platform-removal-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: remove u300 platform ARM: remove tango platform ARM: remove zte zx platform ARM: remove sirf prima2/atlas platforms c6x: remove architecture MAINTAINERS: Remove deleted platform efm32 ARM: drop efm32 platform ARM: Remove PicoXcell platform support ARM: dts: Remove PicoXcell platforms
2021-02-17Revert "ARM: dts: bcm2711: Add the BSC interrupt controller"Florian Fainelli1-12/+0
As Dave reported: This seems to have unintended side effects. GIC interrupt 117 is shared between the standard I2C controllers (i2c-bcm2835) and the l2-intc block handling the HDMI I2C interrupts. There is not a great way to share an interrupt between an interrupt controller using the chained IRQ handler which is an interrupt flow and another driver like i2c-bcm2835 which uses an interrupt handler (although it specifies IRQF_SHARED). Simply revert this change for now which will mean that HDMI I2C will be polled, like it was before. Reported-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Acked-by: Maxime Ripard <mripard@kernel.org> Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2021-02-15Merge branch 'fixes-v5.11' into fixesTony Lindgren17-20/+157
2021-02-15ARM: dts: aspeed: align GPIO hog names with dtschemaKrzysztof Kozlowski2-9/+9
dtschema for pca95xx expects GPIO hogs to end with 'hog' suffix. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20210212162640.66677-2-krzk@kernel.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-02-15ARM: dts: aspeed: fix PCA95xx GPIO expander properties on PortwellKrzysztof Kozlowski1-0/+2
The PCA95xx GPIO expander requires GPIO controller properties to operate properly. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20210212162640.66677-1-krzk@kernel.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-02-11Merge tag 'zynq-dt-for-v5.12-v2' of https://github.com/Xilinx/linux-xlnx ↵Arnd Bergmann2-0/+133
into arm/dt ARM: dts: Zynq DT changes for v5.12-v2 - Add Ebang board support - Add missing zturn boards in dt binding - And convert Zynq QSPI binding * tag 'zynq-dt-for-v5.12-v2' of https://github.com/Xilinx/linux-xlnx: dt-bindings: spi: zynq: Convert Zynq QSPI binding to yaml dt-bindings: arm: xilinx: Add missing Zturn boards ARM: dts: ebaz4205: add pinctrl entries for switches ARM: dts: add Ebang EBAZ4205 device tree dt-bindings: arm: add Ebang EBAZ4205 board dt-bindings: add ebang vendor prefix Link: https://lore.kernel.org/r/19e0e0c9-1bed-bba5-6c80-6903937b3d96@xilinx.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-02-11Merge tag 'aspeed-5.12-devicetree' of ↵Arnd Bergmann13-7/+1534
git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/dt ASPEED device tree updates for 5.12 - New machines * Ampere Mt. Jade, an AST2500 BMC for an x86 server * IBM Everest, an AST2600 BMC for a Power10 server * Supermicro x11spi, an AST2500 BMC for an ARM server - AST2600 eMMC clock phase configuration - Proper clock support for LPC snoop - Misc updates to ethanolx, mowgli, ast2600evb, g220a, and rainier * tag 'aspeed-5.12-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed: ARM: dts: aspeed: ast2600evb: Add enable ehci and uhci ARM: dts: aspeed: mowgli: Add i2c rtc device ARM: dts: aspeed: amd-ethanolx: Enable secondary LPC snooping address ARM: dts: aspeed: Add Everest BMC machine ARM: dts: aspeed: inspur-fp5280g2: Add ipsps1 driver ARM: dts: aspeed: inspur-fp5280g2: Add GPIO line names ARM: dts: aspeed: Add Supermicro x11spi BMC machine ARM: dts: aspeed: g220a: Fix some gpio ARM: dts: aspeed: g220a: Enable ipmb ARM: dts: aspeed: rainier: Add eMMC clock phase compensation ARM: dts: aspeed: Add LCLK to lpc-snoop ARM: dts: aspeed: Add device tree for Ampere's Mt. Jade BMC Link: https://lore.kernel.org/r/CACPK8XfQgGch5bK3YD0La+CE2L5DxVa1MNw6m1fc40j0w7e9Tw@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-02-10ARM: dts: aspeed: ast2600evb: Add enable ehci and uhciRyan Chen1-0/+8
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com> Link: https://lore.kernel.org/r/20201009024937.11246-4-ryan_chen@aspeedtech.com Signed-off-by: Joel Stanley <joel@jms.id.au>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-24 16:49:18 +0300