summaryrefslogtreecommitdiff
path: root/arch/arm/boot
AgeCommit message (Collapse)AuthorFilesLines
2021-03-11ARM: dts: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0 7" OFJagan Teki2-0/+155
7" OF is a capacitive touch 7" Open Frame panel solutions with - 7" AUO B101AW03 LVDS panel - EDT, FT5526 Touch MicroGEA STM32MP1 is a STM32MP157A based Micro SoM. MicroDev 2.0 is a general purpose miniature carrier board with CAN, LTE and LVDS panel interfaces. MicroGEA STM32MP1 needs to mount on top of MicroDev 2.0 board with pluged 7" OF for creating complete MicroGEA STM32MP1 MicroDev 2.0 7" Open Frame Solution board. Add support for it. Signed-off-by: Matteo Lisi <matteo.lisi@engicam.com> Signed-off-by: Francesco Utel <francesco.utel@engicam.com> Signed-off-by: Mirko Ardinghi <mirko.ardinghi@engicam.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-03-11ARM: dts: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0 boardJagan Teki2-0/+56
MicroDev 2.0 is a general purpose miniature carrier board with CAN, LTE and LVDS panel interfaces. Genaral features: - Ethernet 10/100 - USB Type A - Audio Out - microSD - LVDS panel connector - Wifi/BT (option) - UMTS LTE with sim connector (option) MicroGEA STM32MP1 is a STM32MP157A based Micro SoM. MicroGEA STM32MP1 needs to mount on top of this MicroDev 2.0 board for creating complete MicroGEA STM32MP1 MicroDev 2.0 Carrier board. Add support for it. Signed-off-by: Matteo Lisi <matteo.lisi@engicam.com> Signed-off-by: Francesco Utel <francesco.utel@engicam.com> Signed-off-by: Mirko Ardinghi <mirko.ardinghi@engicam.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-03-11ARM: dts: stm32: Add Engicam MicroGEA STM32MP1 SoMJagan Teki1-0/+148
MicroGEA STM32MP1 is a STM32MP157A based Micro SoM. General features: - STM32MP157AAC - Up to 1GB DDR3L-800 - 512MB Nand flash - I2S MicroGEA STM32MP1 needs to mount on top of Engicam MicroDev carrier boards for creating complete platform solutions. Add support for it. Signed-off-by: Matteo Lisi <matteo.lisi@engicam.com> Signed-off-by: Francesco Utel <francesco.utel@engicam.com> Signed-off-by: Mirko Ardinghi <mirko.ardinghi@engicam.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-03-11ARM: dts: stm32: fix usart 2 & 3 pinconf to wake up with flow controlValentin CARON - foss1-3/+18
Modify usart 2 & 3 pins to allow wake up from low power mode while the hardware flow control is activated. UART RTS pin need to stay configure in idle mode to receive characters in order to wake up. Fixes: 842ed898a757 ("ARM: dts: stm32: add usart2, usart3 and uart7 pins in stm32mp15-pinctrl") Signed-off-by: Valentin Caron <valentin.caron@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-03-10ARM: dts: at91: sam9x60: fix mux-mask to match product's datasheetNicolas Ferre2-8/+9
Fix the whole mux-mask table according to datasheet for the sam9x60 product. Too much functions for pins were disabled leading to misunderstandings when enabling more peripherals or taking this table as an example for another board. Take advantage of this fix to move the mux-mask in the SoC file where it belongs and use lower case letters for hex numbers like everywhere in the file. Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Fixes: 1e5f532c2737 ("ARM: dts: at91: sam9x60: add device tree for soc and board") Cc: <stable@vger.kernel.org> # 5.6+ Cc: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20210310152006.15018-1-nicolas.ferre@microchip.com
2021-03-10ARM: dts: at91: sam9x60: fix mux-mask for PA7 so it can be set to A, B and CFederico Pellegrin1-1/+1
According to the datasheet PA7 can be set to either function A, B or C (see table 6-2 of DS60001579D). The previous value would permit just configuring with function C. Signed-off-by: Federico Pellegrin <fede@evolware.org> Fixes: 1e5f532c2737 ("ARM: dts: at91: sam9x60: add device tree for soc and board") Cc: <stable@vger.kernel.org> # 5.6+ Cc: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
2021-03-10ARM: dts: at91-sama5d27_som1: fix phy address to 7Claudiu Beznea1-2/+2
Fix the phy address to 7 for Ethernet PHY on SAMA5D27 SOM1. No connection established if phy address 0 is used. The board uses the 24 pins version of the KSZ8081RNA part, KSZ8081RNA pin 16 REFCLK as PHYAD bit [2] has weak internal pull-down. But at reset, connected to PD09 of the MPU it's connected with an internal pull-up forming PHYAD[2:0] = 7. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Fixes: 2f61929eb10a ("ARM: dts: at91: at91-sama5d27_som1: fix PHY ID") Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: <stable@vger.kernel.org> # 4.14+
2021-03-10Merge branches 'omap-for-v5.13/genpd-dra7', 'omap-for-v5.13/genpd-omap4' and ↵Tony Lindgren5-21/+1
'omap-for-v5.13/genpd-omap5' into omap-for-v5.13/genpd-drop-legacy Merge together branches dropping legacy data to avoid a minor merge conflict.
2021-03-10Merge tags 'genpd-dts-dra7', 'genpd-dts-omap4' and 'genpd-dts-omap5' into ↵Tony Lindgren5-167/+321
omap-for-v5.13/dts-genpd Merge together genpd related dts changes to provide base for dropping the legacy data to prevent merge conflicts and to send dts changes separately.
2021-03-10ARM: OMAP2+: Drop legacy platform data for omap5 l3Tony Lindgren1-1/+0
We can now probe interconnects with simple-pm-bus and genpd. Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-03-10ARM: OMAP2+: Drop legacy platform data for omap5 emifTony Lindgren1-2/+0
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-03-10ARM: OMAP2+: Drop legacy platform data for omap5 dmmTony Lindgren1-1/+0
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-03-10ARM: dts: Configure simple-pm-bus for omap5 l3Tony Lindgren1-1/+5
We can now probe interconnects with device tree only configuration using simple-pm-bus and genpd. Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-03-10ARM: dts: Configure simple-pm-bus for omap5 l4_cfgTony Lindgren1-8/+11
We can now probe interconnects with device tree only configuration using simple-pm-bus and genpd. Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-03-10ARM: dts: Configure simple-pm-bus for omap5 l4_perTony Lindgren1-3/+6
We can now probe interconnects with device tree only configuration using simple-pm-bus and genpd. Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-03-10ARM: dts: Configure simple-pm-bus for omap5 l4_wkupTony Lindgren1-4/+7
We can now probe interconnects with device tree only configuration using simple-pm-bus and genpd. Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-03-10ARM: dts: Move omap5 l3-noc to a separate nodeTony Lindgren1-6/+10
In preparation for probing l3 with simple-pm-bus and genpd, we must move l3 noc to a separate node. This is to prevent omap_l3_noc.c driver from claiming the whole l3 instance before simple-pm-bus has a chance to probe. Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-03-10ARM: dts: Move omap5 mmio-sram out of l3 interconnectTony Lindgren1-5/+9
We need mmio-sram early for omap4_sram_init() for IO barrier init, and will be moving l3 interconnect to probe with simple-pm-bus that probes at module_init() time. So let's move mmio-sram out of l3 to prepare for that. Otherwise we will get the following after probing the interconnects with simple-pm-bus: omap4_sram_init:Unable to get sram pool needed to handle errata I688 Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-03-10ARM: dts: Configure interconnect target module for omap5 sataTony Lindgren2-15/+25
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" peroperty to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Note that the old sysc register offset is wrong, the real offset is at 0x1100 as listed in TRM for SATA_SYSCONFIG register. Looks like we've been happily using sata on the bootloader configured sysconfig register and nobody noticed. Also the old register range for SATAMAC_wrapper registers is wrong at 7 while it should be 8. But that too seems harmless. There is also an L3 parent interconnect range that we don't seem to be using. That can be added as needed later on. Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-03-10ARM: dts: Configure interconnect target module for omap5 gpmcTony Lindgren1-16/+33
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" property to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-03-10ARM: dts: Configure interconnect target module for omap5 mpuTony Lindgren1-13/+15
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-03-10ARM: dts: Configure interconnect target module for omap5 emifTony Lindgren1-20/+42
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" property to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-03-10ARM: dts: Configure interconnect target module for omap5 dmmTony Lindgren1-4/+17
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" property to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-03-10ARM: OMAP2+: Drop legacy platform data for omap4 l3Tony Lindgren1-2/+1
We can now probe interconnects with simple-pm-bus and genpd. Let's drop the legacy data along with the ti,hwmods property and flip over to using simple-pm-bus instead of simple-bus. Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-03-10ARM: OMAP2+: Drop legacy platform data for omap4 debugssTony Lindgren1-1/+0
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-03-10ARM: OMAP2+: Drop legacy platform data for omap4 emifTony Lindgren1-2/+0
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-03-10ARM: OMAP2+: Drop legacy platform data for omap4 dmmTony Lindgren1-1/+0
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-03-10ARM: dts: Prepare for simple-pm-bus for omap4 l3Tony Lindgren1-0/+4
Let's configure omap4 l3 for power-domain and clocks in preparation for starting to use simple-pm-bus. We will flip over to using simple-pm-bus later on after dropping the legacy data for all the devices on l3 interconnect. Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-03-10ARM: OMAP2+: Drop legacy platform data for omap4 control modulesTony Lindgren1-4/+0
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-03-10ARM: OMAP2+: Drop legacy platform data for omap4 issTony Lindgren1-1/+0
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-03-10ARM: dts: Configure simple-pm-bus for omap4 l4_cfgTony Lindgren1-8/+11
We can now probe interconnects with device tree only configuration using simple-pm-bus and genpd. Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-03-10ARM: dts: Configure simple-pm-bus for omap4 l4_perTony Lindgren1-3/+6
We can now probe interconnects with device tree only configuration using simple-pm-bus and genpd. Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-03-10ARM: dts: Configure simple-pm-bus for omap4 l4_wkupTony Lindgren1-4/+7
We can now probe interconnects with device tree only configuration using simple-pm-bus and genpd. Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-03-10ARM: dts: Move omap4 l3-noc to a separate nodeTony Lindgren1-6/+10
In preparation for probing l3 with simple-pm-bus and genpd, we must move l3 noc to a separate node. This is to prevent omap_l3_noc.c driver from claiming the whole l3 instance before simple-pm-bus has a chance to probe. Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-03-10ARM: dts: Move omap4 mmio-sram out of l3 interconnectTony Lindgren1-5/+9
We need mmio-sram early for omap4_sram_init() for IO barrier init, and will be moving l3 interconnect to probe with simple-pm-bus that probes at module_init() time. So let's move mmio-sram out of l3 to prepare for that. Otherwise we will get the following after probing the interconnects with simple-pm-bus: omap4_sram_init:Unable to get sram pool needed to handle errata I688 Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-03-10ARM: dts: Configure interconnect target module for omap4 mpuTony Lindgren1-13/+15
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-03-10ARM: dts: Configure interconnect target module for omap4 debugssTony Lindgren2-18/+27
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" property to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-03-10ARM: dts: Configure interconnect target module for omap4 emifTony Lindgren1-18/+40
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" property to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-03-10ARM: dts: Configure interconnect target module for omap4 dmmTony Lindgren1-4/+17
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" property to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Let's also use GIC_SPI and IRQ_TYPE_LEVEL_HIGH defines while at it. Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-03-10ARM: dts: Configure power-domain for omap4 dts issTony Lindgren1-0/+1
Configure power-domain for omap4 dts iss in preparation to probing devices with simple-pm-bus and genpd. Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-03-10ARM: dts: Configure power-domain for omap4 gfxTony Lindgren1-0/+1
Configure power-domain for omap4 dts gfx in preparation to probing devices with simple-pm-bus and genpd. Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-03-10ARM: dts: Configure simple-pm-bus for dra7 l3Tony Lindgren1-2/+4
We can now probe interconnects with device tree only configuration using simple-pm-bus and genpd. Tested-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-03-10ARM: dts: Configure simple-pm-bus for dra7 l4_cfgTony Lindgren1-4/+7
We can now probe interconnects with device tree only configuration using simple-pm-bus and genpd. Tested-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-03-10ARM: dts: Configure simple-pm-bus for dra7 l4_per3Tony Lindgren1-2/+5
We can now probe interconnects with device tree only configuration using simple-pm-bus and genpd. Tested-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-03-10ARM: dts: Configure simple-pm-bus for dra7 l4_per2Tony Lindgren1-2/+5
We can now probe interconnects with device tree only configuration using simple-pm-bus and genpd. Tested-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-03-10ARM: dts: Configure simple-pm-bus for dra7 l4_per1Tony Lindgren1-3/+6
We can now probe interconnects with device tree only configuration using simple-pm-bus and genpd. Tested-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-03-10ARM: dts: Configure simple-pm-bus for dra7 l4_wkupTony Lindgren1-5/+8
We can now probe interconnects with device tree only configuration using simple-pm-bus and genpd. Tested-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-03-10ARM: dts: Configure interconnect target module for dra7 dmmTony Lindgren1-4/+17
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" peroperty to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Tested-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-03-10ARM: OMAP2+: Drop legacy platform data for dra7 dmmTony Lindgren1-1/+0
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-03-10ARM: dts: Configure interconnect target module for dra7 mpuTony Lindgren1-12/+15
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Tested-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-24 14:36:00 +0300