summaryrefslogtreecommitdiff
path: root/arch/arm/boot
AgeCommit message (Collapse)AuthorFilesLines
2021-04-01Merge tag 'ux500-dts-v5.13' of ↵Arnd Bergmann8-285/+419
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt Ux500 DTS changes for the v5.13 kernel cycle: - Fix up the WLAN on Janice - Fix the touchscreen on TVK R2 - Push down definitions to the UIBs instead of trying to share too much. - Bump the AUX1 voltage on the AB8500 so the touchscreen will work. - Define the CTTYSP touchscreen on the TVK R3. * tag 'ux500-dts-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: ARM: dts: ux500: Add Cypress CTTYSP touch to TVK UIB ARM: dts: ux500: Bump AUX1 voltage ARM: dts: ux500: Clarify UIB version per board ARM: dts: ux500: Totally separate TVK R2 and R3 ARM: dts: ux500: Push TC35893 defines to each UIB ARM: dts: ux500: Fix up TVK R3 sensors ARM: dts: ux500: Push sensors to TVK R2 board ARM: dts: ux500: Move Synaptics to right include ARM: dts: ux500: Fix touchscreen on TVK R2 ARM: dts: ux500: Fix BT+WLAN on Janice Link: https://lore.kernel.org/r/CACRpkdanRQ6A85d=7vgpzbg-m3-yFcpQ4fuzrxZu3RJ0DrA2bQ@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-01Merge tag 'imx-dt-5.13' of ↵Arnd Bergmann32-70/+270
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX device tree change for 5.13: - New board support: i.MX7D based reMarkable2. - Clean up imx6ql-pfla02 hog group by moving pins into corresponded client groups. - Add Netronix embedded controller for imx50-kobo-aura. - A series from Sebastian Reichel to improve GE Bx50v3 device trees. - Support I2C bus recovery for imx6qdl-wandboard by adding SCL/SDA GPIOs. - Remove unnecessary #address-cells/#size-cells from imx6qdl-gw boards. - Various small and random device tree update. * tag 'imx-dt-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (21 commits) ARM: dts: imx6: pbab01: Set USB OTG port to peripheral ARM: dts: imx6: pfla02: Fix USB vbus enable pinmuxing ARM: imx7d-remarkable2: Initial device tree for reMarkable2 ARM: dts: imx7d-mba7: Remove unsupported PCI properties ARM: dts: imx6qdl-gw*: Remove unnecessary #address-cells/#size-cells ARM: dts: imx6dl-plybas: Fix gpio-keys W=1 warnings ARM: dts: imx: bx50v3: Define GPIO line names ARM: dts: imx: bx50v3: i2c GPIOs are open drain ARM: dts: imx6q-ba16: improve PHY information ARM: dts: imx6q-ba16: add USB OTG VBUS enable GPIO ARM: dts: ls1021a: mark crypto engine dma coherent ARM: dts: colibri-imx6ull: Change drive strength for usdhc2 ARM: dts: imx6ql-pfla02: Move "hog" pins into corresponded pin groups ARM: dts: imx6qdl-phytec-pbab01: Select synchronous mode for AUDMUX ARM: dts: imx6qdl-ts7970: Drop redundant "fsl,mode" option ARM: dts: imx53-qsb: Describe the esdhc1 card detect pin ARM: dts: ls1021a: Harmonize DWC USB3 DT nodes name ARM: dts: imx6qdl-wandboard: add scl/sda gpios definitions for i2c bus recovery ARM: dts: imx: Mark IIM as syscon on i.MX51/i.MX53 ARM: dts: imx6sl-tolino-shine2hd: Add Netronix embedded controller ... Link: https://lore.kernel.org/r/20210331041019.31345-4-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-01Merge tag 'arm-soc/for-5.13/devicetree' of ↵Arnd Bergmann25-55/+94
https://github.com/Broadcom/stblinux into arm/dt This pull request contains Broadcom ARM-based SoCs Device Tree changes for 5.13, please pull the following: - Rafal fixes YAML warnings for the memory nodes of BCM5301X nodes and adds support for the NVMEM NVRAM node on Linksys and Luxul WLAN routers. He also fixes up the partitions for the Linksys EA9400 to use the newly introduced parser compatible and sets the power LED to its default state. * tag 'arm-soc/for-5.13/devicetree' of https://github.com/Broadcom/stblinux: ARM: dts: BCM5301X: Set Linksys EA9500 power LED ARM: dts: BCM5301X: Fix Linksys EA9500 partitions ARM: dts: BCM5301X: Describe NVMEM NVRAM on Linksys & Luxul routers ARM: dts: BCM5301X: fix "reg" formatting in /memory node Link: https://lore.kernel.org/r/20210330184006.1451315-1-f.fainelli@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-01Merge tag 'omap-for-v5.13/dts-genpd-signed' of ↵Arnd Bergmann9-261/+539
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt Devicetree changes for omaps for genpd support for v5.13 In order to move omap4/5 and dra7 to probe with devicetree data and genpd, we need to add the missing interconnect target module configuration for the drivers that do not still have it. This is similar to what we have already done earlier for am3 and 4 earlier. These patches are very much similar for all the three SoCs here. The dra7 changes were already available for v5.12 merge window, but were considered too late to add for v5.12. The patches for omap4 and 5 follow the same pattern, except for PCIe that is available only on dra7. We do the changes one driver at a time, and still keep the legacy property for "ti,hwmods" mostly around, except for cases when already not needed. We will be dropping the custom property and related legacy data in a follow-up series. * tag 'omap-for-v5.13/dts-genpd-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (53 commits) ARM: dts: Configure simple-pm-bus for omap5 l3 ARM: dts: Configure simple-pm-bus for omap5 l4_cfg ARM: dts: Configure simple-pm-bus for omap5 l4_per ARM: dts: Configure simple-pm-bus for omap5 l4_wkup ARM: dts: Move omap5 l3-noc to a separate node ARM: dts: Move omap5 mmio-sram out of l3 interconnect ARM: dts: Configure interconnect target module for omap5 sata ARM: dts: Configure interconnect target module for omap5 gpmc ARM: dts: Configure interconnect target module for omap5 mpu ARM: dts: Configure interconnect target module for omap5 emif ARM: dts: Configure interconnect target module for omap5 dmm ARM: dts: Prepare for simple-pm-bus for omap4 l3 ARM: dts: Configure simple-pm-bus for omap4 l4_cfg ARM: dts: Configure simple-pm-bus for omap4 l4_per ARM: dts: Configure simple-pm-bus for omap4 l4_wkup ARM: dts: Move omap4 l3-noc to a separate node ARM: dts: Move omap4 mmio-sram out of l3 interconnect ARM: dts: Configure interconnect target module for omap4 mpu ARM: dts: Configure interconnect target module for omap4 debugss ARM: dts: Configure interconnect target module for omap4 emif ... Link: https://lore.kernel.org/r/pull-1617004205-537424@atomide.com-2 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-01ARM: mstar: Add mpll to base dtsiDaniel Palmer1-0/+8
All of the currently known MStar/SigmaStar ARMv7 SoCs have at least one MPLL and it seems to always be at the same place so add it to the base dtsi. Signed-off-by: Daniel Palmer <daniel@0x0f.com> Link: https://lore.kernel.org/r/20210301123542.2800643-4-daniel@0x0f.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-01ARM: mstar: Add the external clocks to the base dstiDaniel Palmer1-0/+15
All of the currently known MStar/SigmaStar ARMv7 SoCs have an "xtal" clock input that is usually 24MHz and an "RTC xtal" that is usually 32KHz. The xtal input has to be connected to something so it's enabled by default. The MSC313 and MSC313E do not bring the RTC clock input out to the pins so it's impossible to connect it. The SSC8336 does bring the input out to the pins but it's not always actually connected to something. The RTC node needs to always be present because in the future the nodes for the clock muxes will refer to it even if it's not usable. The RTC node is disabled by default and should be enabled at the board level if the RTC input is wired up. Signed-off-by: Daniel Palmer <daniel@0x0f.com> Link: https://lore.kernel.org/r/20210301123542.2800643-3-daniel@0x0f.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-01ARM: dts: stm32: Add PTP clock to Ethernet controllerKurt Kanzenbach1-0/+2
Add the PTP clock to the Ethernet controller. Otherwise, the driver uses the main clock to derive the PTP frequency which is not necessarily the correct one. Tested with linuxptp on Olimex STMP1-OLinuXino-LIME2. Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-04-01Merge tag 'imx-fixes-5.12-2' of ↵Arnd Bergmann1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.12, round 2: - Fix a system failure on imx6qdl-phytec-pfla02 board when booting from SD, by adding missing vmmc supply for SD interfaces. - Fix address typo in i.MX8MM/Q IOMUXC_SD1_DATA0_GPIO2_IO2 definition. * tag 'imx-fixes-5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx6: pbab01: Set vmmc supply for both SD interfaces arm64: dts: imx8mm/q: Fix pad control of SD1_DATA0 Link: https://lore.kernel.org/r/20210330090236.GQ22955@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-01Merge tag 'omap-for-v5.12/fixes-rc4-signed' of ↵Arnd Bergmann3-8/+10
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes More fixes for omaps for v5.12-rc cycle Two fixes for hangs, mmc slot order fix, and a voltage typo fix: - Remove unused duplicate sha2md5_fck clock node that can race with the OMAP4_SHA2MD5_CLKCTRL clock node for disable for unused clocks - Add aliases for omap4/5 mmc to put the slots back into the right order again - Fix typo for bionic voltage controllers that accidentally use mpu for all instances instead of mpu, core and iva - Fix random hangs for droid4 caused by missing fix from TI Android kernel tree to do a dummy smc call on cpuidle wakeup path * tag 'omap-for-v5.12/fixes-rc4-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP4: PM: update ROM return address for OSWR and OFF ARM: OMAP4: Fix PMIC voltage domains for bionic ARM: dts: Fix moving mmc devices with aliases for omap4 & 5 ARM: dts: Drop duplicate sha2md5_fck to fix clk_disable race Link: https://lore.kernel.org/r/pull-1616584662-702939@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-01Merge tag 'arm-soc/for-5.12/devicetree-part2' of ↵Arnd Bergmann1-12/+0
https://github.com/Broadcom/stblinux into arm/fixes This pull request contains Broadcom ARM-based SoC changes for 5.12, please pull the following: - Florian reverts the adding of the second level interrupt controller for HDMI BSC interrupts since they collide with the main I2C controller (i2c-bcm2835). * tag 'arm-soc/for-5.12/devicetree-part2' of https://github.com/Broadcom/stblinux: Revert "ARM: dts: bcm2711: Add the BSC interrupt controller" Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-01ARM: dts: stm32: Enable crc1 and cryp1 where applicable on DHSOMMarek Vasut5-0/+20
Enable the CRC accelerator on all STM32MP15xx DHSOM based systems and CRYP accelerator on all STM32MP15x[CF] DHSOM based systems. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-04-01ARM: dts: stm32: Update GPIO line names on PicoITXMarek Vasut1-6/+6
Use more specific custom GPIO line names which denote exactly where the GPIO came from, i.e. the base board. Also, update the new blank GPIO line names set up by stm32mp15xx-dhcom-som.dtsi back to their original values. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-04-01ARM: dts: stm32: Update GPIO line names on DRC02Marek Vasut1-6/+6
Use more specific custom GPIO line names which denote exactly where the GPIO came from, i.e. the base board. Also, update the new blank GPIO line names set up by stm32mp15xx-dhcom-som.dtsi back to their original values. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-04-01ARM: dts: stm32: Fill GPIO line names on AV96Marek Vasut1-0/+35
Fill in the custom GPIO line names used by DH. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-04-01ARM: dts: stm32: Fill GPIO line names on DHCOM SoMMarek Vasut1-0/+60
Fill in the custom GPIO line names used by DH on the DHCOM SoM. The GPIO line names are in accordance to DHCOM Design Guide R04 available at [1], section 3.9 GPIO. [1] https://wiki.dh-electronics.com/images/5/52/DOC_DHCOM-Design-Guide_R04_2018-06-28.pdf Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-04-01ARM: dts: stm32: add support for art-pi board based on stm32h750xbh6dillon min4-0/+325
This patchset has following changes: - introduce stm32h750.dtsi to support stm32h750 value line - add pin groups for usart3/uart4/spi1/sdmmc2 - add stm32h750i-art-pi.dtb (arch/arm/boot/dts/Makefile) - add stm32h750-art-pi.dts to support art-pi board art-pi board component: - 8MiB qspi flash - 16MiB spi flash - 32MiB sdram - ap6212 wifi&bt&fm the detail board information can be found at: https://art-pi.gitee.io/website/ Signed-off-by: dillon min <dillon.minfei@gmail.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-04-01ARM: dts: stm32: fix i2c node typo in stm32h743Alexandre Torgue1-2/+2
Replace upper case by lower case in i2c nodes name. Signed-off-by: dillon min <dillon.minfei@gmail.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-04-01ARM: dts: stm32: add new instances for stm32h743 MCUAlexandre Torgue1-0/+31
Some instances are missing in current support of stm32h743 MCU. This commit adds usart3/uart4 and sdmmc2 support. Signed-off-by: dillon min <dillon.minfei@gmail.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-04-01ARM: dts: stm32: introduce stm32h7-pinctrl.dtsi to support stm32h750dillon min5-308/+330
This patch is intend to add support stm32h750 value line, just add stm32h7-pinctrl.dtsi for extending, with following changes: - rename stm32h743-pinctrl.dtsi to stm32h7-pinctrl.dtsi - move 'pin-controller' from stm32h7-pinctrl.dtsi to stm32h743.dtsi, to fix make dtbs_check warrnings arch/arm/boot/dts/stm32h750i-art-pi.dt.yaml: soc: 'i2c@40005C00', 'i2c@58001C00' do not match any of the regexes: '@(0|[1-9a-f][0-9a-f]*)$', '^[^@]+$', 'pinctrl-[0-9]+' Signed-off-by: dillon min <dillon.minfei@gmail.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-03-31ARM: dts: am335x-boneblack.dts: unique gpio-line-namesDrew Fustini1-66/+66
Based on linux-gpio discussion [1], it is best practice to make the gpio-line-names unique. Generic names like "[ethernet]" are replaced with the name of the unique signal on the AM3358 SoC ball corresponding to the gpio line. "[NC]" is also renamed to the standard "NC" name to represent "not connected". [1] https://lore.kernel.org/linux-gpio/20201216195357.GA2583366@x1/ Signed-off-by: Drew Fustini <drew@beagleboard.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-03-30arm: mediatek: dts: activate SMP for mt6589Boris Lysov1-0/+1
This simple patch activates SMP for mt6589 by adding the missing "enable-method" property. After applying this patch kernel log indicates all cores are brought up: [ 0.070122] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.071652] Setting up static identity map for 0x80100000 - 0x80100054 [ 0.072711] rcu: Hierarchical SRCU implementation. [ 0.073853] smp: Bringing up secondary CPUs ... [ 0.133675] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.193675] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.253675] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.253818] smp: Brought up 1 node, 4 CPUs [ 0.256930] SMP: Total of 4 processors activated (7982.28 BogoMIPS). [ 0.257855] CPU: All CPU(s) started in SVC mode. Before this change CPU cores 1-3 didn't start and the following lines were in kernel log: [ 0.070126] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.071640] Setting up static identity map for 0x80100000 - 0x80100054 [ 0.072706] rcu: Hierarchical SRCU implementation. [ 0.073850] smp: Bringing up secondary CPUs ... [ 0.076052] smp: Brought up 1 node, 1 CPU [ 0.076678] SMP: Total of 1 processors activated (2000.48 BogoMIPS). [ 0.077603] CPU: All CPU(s) started in SVC mode. Signed-off-by: Boris Lysov <arzamas-16@mail.ee> Link: https://lore.kernel.org/r/20210314023735.052d2d35@pc Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2021-03-30ARM: dts: ux500: Add Cypress CTTYSP touch to TVK UIBLinus Walleij1-0/+46
The TVK1281618 R3 UIB has a Cypress CTTYSP touchscreen. Add it to the device tree file. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-03-30ARM: dts: ux500: Bump AUX1 voltageLinus Walleij1-2/+2
The voltage default on the AB8500 VAUX1 regulator is way too low and does not correspond to the setting in the vendor tree. This should be 2.8-3.3 V not 2.5-2.9 V or things like the HREFP520 touchscreen will not work. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-03-30ARM: dts: imx6: pbab01: Set vmmc supply for both SD interfacesStefan Riedmueller1-0/+2
Setting the vmmc supplies is crucial since otherwise the supplying regulators get disabled and the SD interfaces are no longer powered which leads to system failures if the system is booted from that SD interface. Fixes: 1e44d3f880d5 ("ARM i.MX6Q: dts: Enable I2C1 with EEPROM and PMIC on Phytec phyFLEX-i.MX6 Ouad module") Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-03-30ARM: dts: imx6: pbab01: Set USB OTG port to peripheralStefan Riedmueller1-0/+1
Due to a hardware bug preventing the correct detection if the ID pin the USB OTG port cannot be used in otg mode. It can either be set to host or peripheral. Set it to peripheral so vbus is disabled by default. Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-03-30ARM: dts: imx6: pfla02: Fix USB vbus enable pinmuxingStefan Riedmueller1-4/+4
The pinmuxing for the enable pin of the usbh1 node is wrong. It needs to be muxed as GPIO. While at it, move the pinctrl to the vbus regulator since it is actually the regulator enable pin. Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-03-29ARM: dts: BCM5301X: Set Linksys EA9500 power LEDRafał Miłecki1-0/+1
Set Linux default trigger to default on, just like it's normally done for power LEDs. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2021-03-29ARM: dts: BCM5301X: Fix Linksys EA9500 partitionsRafał Miłecki1-9/+7
Partitions are basically fixed indeed but firmware ones don't have hardcoded function ("firmware" vs "failsafe"). Actual function depends on bootloader configuration. Use a proper binding for that. While at it fix numbers formatting to avoid: arch/arm/boot/dts/bcm47094-linksys-panamera.dt.yaml: partitions: 'partition@1F00000' does not match any of the regexes: '^partition@[0-9a-f]+$', 'pinctrl-[0-9]+' From schema: Documentation/devicetree/bindings/mtd/partitions/linksys,ns-partitions.yaml Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2021-03-29arm: dts: mt2701: harmonize node names and compatiblesChunfeng Yun1-8/+11
This is used to fix dtbs_check warning Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20210316092232.9806-13-chunfeng.yun@mediatek.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2021-03-29arm: dts: mt7623: harmonize node names and compatiblesChunfeng Yun2-14/+16
This is used to fix dtbs_check warning Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20210316092232.9806-12-chunfeng.yun@mediatek.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2021-03-29arm: dts: mt7629: harmonize node names and compatiblesChunfeng Yun1-5/+7
This is used to fix dtbs_check warning Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20210316092232.9806-11-chunfeng.yun@mediatek.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2021-03-29ARM: dts: stm32: enable the analog filter for all I2C nodes in stm32mp151Alain Volmat1-0/+6
Enable the analog filter for all I2C nodes of the stm32mp151. Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-03-29ARM: imx7d-remarkable2: Initial device tree for reMarkable2Alistair Francis2-0/+147
The reMarkable2 (https://remarkable.com) is an e-ink tablet based on the imx7d SoC. This commit is based on the DTS provide by reMarkable but ported to the latest kernel (instead of 4.14). I have removed references to non-upstream devices and have changed the UART so that the console can be accessed without having to open up the device via the OTG pogo pins. Currently the kernel boots, but there is no support for the display. WiFi is untested (no display or UART RX makes it hard to test), but should work with the current upstream driver. As it's untested it's not included in this commit. Signed-off-by: Alistair Francis <alistair@alistair23.me> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-03-28ARM: dts: exynos: Add front camera support to I9100Timon Baetz1-0/+52
Add node for Samsung S5K5BAF CMOS image sensor and enable the associated MIPI CSI-2 receiver node. Signed-off-by: Timon Baetz <timon.baetz@protonmail.com> Link: https://lore.kernel.org/r/20210327200851.777327-1-timon.baetz@protonmail.com [krzk: put csis_1 node in alphabetical order] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
2021-03-27ARM: dts: ux500: Clarify UIB version per boardLinus Walleij3-5/+5
Make it clear which UIB is used with each board in comments and model text. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-03-27ARM: dts: ux500: Totally separate TVK R2 and R3Linus Walleij3-55/+64
There is no point in sharing any definitions between the R2 and R3 versions of the TVK1281618 UIB. The proximity sensor collides with the touchscreen etc, it is less confusing to get rid of the overarching TVK1281618 UIB file and just use one for each. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-03-27ARM: dts: ux500: Push TC35893 defines to each UIBLinus Walleij3-62/+127
The TC35893 is connected to different GPIOs in different UIBs so just bite the bullet and push this info down into respective UIB so we can avoid confusion when reading the DTS files. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-03-26ARM: tegra: acer-a500: Add atmel,wakeup-method propertyDmitry Osipenko1-0/+2
Acer A500 uses Atmel Maxtouch 1386 touchscreen controller. This controller has WAKE line which could be connected to I2C clock lane, dedicated GPIO or fixed to HIGH level. Controller wakes up from a deep sleep when WAKE line is asserted low. Acer A500 has WAKE line connected to I2C clock and Linux device driver doesn't work property without knowing what wakeup method is used by h/w. Add atmel,wakeup-method property to the touchscreen node. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> [treding@nvidia.com: use literal to avoid dependency on header file] Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-03-26ARM: dts: ux500: Fix up TVK R3 sensorsLinus Walleij1-23/+50
The TVK1281618 R3 sensors are different from the R2 board, some incorrectness is fixed and some new sensors added, we also rename the nodes appropriately with accelerometer@ etc. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-03-26ARM: dts: ux500: Push sensors to TVK R2 boardLinus Walleij2-73/+70
These sensors are particular to the TVK UIB R2 board and will conflict with the R3 board, so push them down to the actual UIB include DTSI. Rename the nodes appropriately to accelerometer@ etc in the process. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-03-26ARM: dts: ux500: Move Synaptics to right includeLinus Walleij2-34/+29
The Synaptics RMI4 touchscreen is a property of the TVK1281618 R2 UIB, so move it into that file instead of the main TVK1281618 main include so we can define another touchscreen for the R3 UIB. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-03-26ARM: dts: ux500: Fix touchscreen on TVK R2Linus Walleij2-3/+10
The touchscreen is mounted with flipped x/y on the R2 version of TVK1281618. Push this setting to that DTS file only. The function nodes were named wrong so the OF properties didn not "take". Fix the node names from "rmi-fnn" to "rmi4-nn" so this also work. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-03-26ARM: dts: ux500: Fix BT+WLAN on JaniceLinus Walleij1-30/+18
GPIO215 has a rail named WLAN_RST_N but it is actually connected to the pin WLAN_REG_ON on the BCM4330 chip, so this should be the WLAN regulator GPIO rather than GPIO222. The misunderstanding comes from the erroneous naming of the rail on the schematic. GPIO222 is indeed connected to the rail BT_VREG_EN and the pin BT_REG_ON, and can be handled by the driver as usual. This corrects misunderstandings and makes Janice's WLAN and BT setup look like that of Golden and Skomer. Add explicit BCM4330 compatible to the WLAN chip. Cc: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
2021-03-26ARM: dts: BCM5301X: Describe NVMEM NVRAM on Linksys & Luxul routersRafał Miłecki8-0/+40
Provide access to NVRAM which contains device environment variables. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2021-03-26ARM: dts: BCM5301X: fix "reg" formatting in /memory nodeRafał Miłecki23-46/+46
This fixes warnings/errors like: arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dt.yaml: /: memory@0:reg:0: [0, 134217728, 2281701376, 402653184] is too long From schema: /lib/python3.6/site-packages/dtschema/schemas/reg.yaml Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2021-03-25ARM: dts: rockchip: remove clock-names property from watchdog node in ↵Johan Jonker1-1/+0
rv1108.dtsi A test with the command below gives this error: /arch/arm/boot/dts/rv1108-evb.dt.yaml: watchdog@10360000: clock-names:0: 'tclk' was expected Comment from the dw_wdt.c file: Try to request the watchdog dedicated timer clock source. It must be supplied if asynchronous mode is enabled. Otherwise fallback to the common timer/bus clocks configuration, in which the very first found clock supply both timer and APB signals. Like in the other Rockchip watchdog nodes the property "clock-names" is not needed, so remove it. make ARCH=arm dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20201218120534.13788-8-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-03-25ARM: dts: rockchip: add new watchdog compatible to rk322x.dtsiJohan Jonker1-1/+1
The watchdog compatible strings are suppose to be SoC orientated. In the more recently added Rockchip rk322x.dtsi file only the fallback string "snps,dw-wdt" is used, so add the new compatible string: "rockchip,rk3228-wdt", "snps,dw-wdt" make ARCH=arm dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20201218120534.13788-3-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-03-25ARM: dts: rockchip: add new watchdog compatible to rv1108.dtsiJohan Jonker1-1/+1
The watchdog compatible strings are suppose to be SoC orientated. In the more recently added Rockchip rv1108.dtsi file only the fallback string "snps,dw-wdt" is used, so add the new compatible string: "rockchip,rv1108-wdt", "snps,dw-wdt" make ARCH=arm dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20201218120534.13788-2-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-03-24ARM: dts: motorola-cpcap-mapphone: Prepare for dtbs_check parsingSebastian Reichel1-31/+28
'<&gpio1 parameters &gpio2 parameters>' and '<&gpio1 parameters>, <&gpio2 parameters>' result in the same DTB, but second format has better source code readability. Also 'dtbs_check' currently uses this format to determine the amount of items specified, so using this syntax is needed to successfully verify the devicetree source against a DT schema format. Cc: linux-omap@vger.kernel.org Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-03-24ARM: dts: am33xx-l4: fix tscadc@0 node indentationDario Binacchi1-14/+14
Fix the broken indentation of tscadc@0 node. Signed-off-by: Dario Binacchi <dariobin@libero.it> Signed-off-by: Tony Lindgren <tony@atomide.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-24 03:30:41 +0300