summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts
AgeCommit message (Collapse)AuthorFilesLines
2020-12-31arm: dts: owl-s500: Add Clock Management UnitCristian Ciocaltea1-0/+14
Add Clock Management Unit for Actions Semi S500 SoC. Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2020-12-17Merge tag 'arm-soc-omap-genpd-5.11' of ↵Linus Torvalds10-194/+695
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC OMAP GenPD updates from Arnd Bergmann: "These are additional updates for the power domain support on OMAP, moving to an implementation based on device tree information instead of SoC specific code. This is the latest step in the ongoing process for moving code out of arch/arm/mach-omap2. I kept this separate from the other driver changes since it touches code in multiple areas" * tag 'arm-soc-omap-genpd-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (51 commits) ARM: OMAP2+: Fix am4 only build after genpd changes ARM: dts: Configure power domain for omap5 dss ARM: dts: omap5: add remaining PRM instances soc: ti: omap-prm: omap5: add genpd support for remaining PRM instances ARM: OMAP2+: Drop legacy platform data for dra7 gpmc ARM: dts: Configure interconnect target module for dra7 iva ARM: dts: dra7: add remaining PRM instances soc: ti: omap-prm: dra7: add genpd support for remaining PRM instances clk: ti: dra7: Drop idlest polling from IVA clkctrl clocks ARM: OMAP2+: Drop legacy platform data for omap4 gpmc ARM: OMAP2+: Drop legacy platform data for omap4 iva ARM: dts: Configure power domain for omap4 dsp ARM: dts: Configure power domain for omap4 dss ARM: dts: omap4: add remaining PRM instances soc: ti: omap-prm: omap4: add genpd support for remaining PRM instances clk: ti: omap4: Drop idlest polling from IVA clkctrl clocks ARM: OMAP2+: Drop legacy remaining legacy platform data for am4 ARM: dts: Use simple-pm-bus for genpd for am4 l3 ARM: dts: Move am4 l3 noc to a separate node ARM: dts: Use simple-pm-bus for genpd for am4 l4_per ...
2020-12-17Merge tag 'arm-soc-drivers-5.11' of ↵Linus Torvalds3-0/+15
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "There are a couple of subsystems maintained by other people that merge their drivers through the SoC tree, those changes include: - The SCMI firmware framework gains support for sensor notifications and for controlling voltage domains. - A large update for the Tegra memory controller driver, integrating it better with the interconnect framework - The memory controller subsystem gains support for Mediatek MT8192 - The reset controller framework gains support for sharing pulsed resets For Soc specific drivers in drivers/soc, the main changes are - The Allwinner/sunxi MBUS gets a rework for the way it handles dma_map_ops and offsets between physical and dma address spaces. - An errata fix plus some cleanups for Freescale Layerscape SoCs - A cleanup for renesas drivers regarding MMIO accesses. - New SoC specific drivers for Mediatek MT8192 and MT8183 power domains - New SoC specific drivers for Aspeed AST2600 LPC bus control and SoC identification. - Core Power Domain support for Qualcomm MSM8916, MSM8939, SDM660 and SDX55. - A rework of the TI AM33xx 'genpd' power domain support to use information from DT instead of platform data - Support for TI AM64x SoCs - Allow building some Amlogic drivers as modules instead of built-in Finally, there are numerous cleanups and smaller bug fixes for Mediatek, Tegra, Samsung, Qualcomm, TI OMAP, Amlogic, Rockchips, Renesas, and Xilinx SoCs" * tag 'arm-soc-drivers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (222 commits) soc: mediatek: mmsys: Specify HAS_IOMEM dependency for MTK_MMSYS firmware: xilinx: Properly align function parameter firmware: xilinx: Add a blank line after function declaration firmware: xilinx: Remove additional newline firmware: xilinx: Fix kernel-doc warnings firmware: xlnx-zynqmp: fix compilation warning soc: xilinx: vcu: add missing register NUM_CORE soc: xilinx: vcu: use vcu-settings syscon registers dt-bindings: soc: xlnx: extract xlnx, vcu-settings to separate binding soc: xilinx: vcu: drop useless success message clk: samsung: mark PM functions as __maybe_unused soc: samsung: exynos-chipid: initialize later - with arch_initcall soc: samsung: exynos-chipid: order list of SoCs by name memory: jz4780_nemc: Fix potential NULL dereference in jz4780_nemc_probe() memory: ti-emif-sram: only build for ARMv7 memory: tegra30: Support interconnect framework memory: tegra20: Support hardware versioning and clean up OPP table initialization dt-bindings: memory: tegra20-emc: Document opp-supported-hw property soc: rockchip: io-domain: Fix error return code in rockchip_iodomain_probe() reset-controller: ti: force the write operation when assert or deassert ...
2020-12-17Merge tag 'arm-soc-dt-5.11' of ↵Linus Torvalds319-1565/+20326
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM device tree updates from Arnd Bergmann: "Across all platforms, there is a continued move towards DT schema for validating the dts files. As a result there are bug fixes for mistakes that are found using these schema, in addition to warnings from the dtc compiler. As usual, many changes are for adding support for additional on-chip and on-board components in the machines we already support. The newly supported SoCs for this release are: - MStar Infinity2M, a low-end IP camera chip based on a dual-core Cortex-A7, otherwise similar to the Infinity chip we already support. This is also known as the SigmaStar SSD202D, and we add support for the Honestar ssd201htv2 development kit. - Nuvoton NPCM730, a Cortex-A9 based Baseboard Management Controller (BMC), in the same family as the NPCM750. This gets used in the Ampere Altra based "Fii Kudo" server and the Quanta GSJ, both of which are added as well. - Broadcom BCM4908, a 64-bit home router chip based on Broadcom's own Brahma-B53 CPU. Support is also added for the Asus ROG Rapture GT-AC5300 high-end WiFi router based on this chip. - Mediatek MT8192 is a new SoC based on eight Cortex-A76/A55 cores, meant for faster Chromebooks and tablets. It gets added along with its reference design. - Mediatek MT6779 (Helio P90) is a high-end phone chip from last year's generation, also added along with its reference board. This one is still based on Cortex-A75/A55. - Mediatek MT8167 is a version of the already supported MT8516 chip, both based on Cortex-A35. It gets added along with the "Pumpkin" single board computer, but is likely to also make its way into low-end tablets in the future. For the already supported chips, there are a number of new boards. Interestingly there are more 32-bit machines added this time than 64-bit. Here is a brief list of the new boards: - Three new Mikrotik router variants based on Marvell Prestera 98DX3236, a close relative of the more common Armada XP - A reference board for the Marvell Armada 382 - Three new servers using ASpeed baseboard management controllers, the actual machines being from Bytedance, Facebook and IBM, and one machine using the Nuvoton NPCM750 BMC. - The Galaxy Note 10.1 (P4) tablet, using an Exynos 4412. - The usual set of 32-bit i.MX industrial/embedded hardware: * Protonic WD3 (tractor e-cockpit) * Kamstrup OMNIA Flex Concentrator (smart grid platform) * Van der Laan LANMCU (food storage) * Altesco I6P (vehicle inspection stations) * PHYTEC phyBOARD-Segin/phyCORE-i.MX6UL baseboard - DH electronics STM32MP157C DHCOM, a PicoITX carrier board for the aleady supported DHCOM module - Three new Allwinner SoC based single-board computers: * NanoPi R1 (H3 based) * FriendlyArm ZeroPi (H3 based) * Elimo Initium SBC (S3 based) - Ouya Game Console based on Nvidia Tegra 3 - Version 5 of the already supported Zynq Z-Turn MYIR Board - LX2162AQDS, a reference platform for NXP Layerscape LX2162A, which is a repackaged 16-core LX2160A - A series of Kontron i.MX8M Mini baseboard/SoM versions - Espressobin Ultra, a new variant of the popular Armada 3700 based board, - IEI Puzzle-M801, a rackmount network appliance based on Marvell Armada 8040 - Microsoft Lumia 950 XL, a phone - HDK855 and HDK865 Hardware development kits for Qualcomm sm8250 and sm8150, respectively - Three new board variants of the "Trogdor" Chromebook (sc7180) - New board variants of the Renesas based "Kingfisher" and "HiHope" reference boards - Kobol Helios64, an open source NAS appliance based on Rockchips RK3399 - Engicam PX30.Core, a SoM based on Rockchip PX30, along with a few carrier boards" * tag 'arm-soc-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (679 commits) arm64: dts: sparx5: Add SGPIO devices arm64: dts: sparx5: Add reset support dt-bindings: gpio: Add a binding header for the MSC313 GPIO driver ARM: mstar: SMP support ARM: mstar: Wire up smpctrl for SSD201/SSD202D ARM: mstar: Add smp ctrl registers to infinity2m dtsi ARM: mstar: Add dts for Honestar ssd201htv2 ARM: mstar: Add chip level dtsi for SSD202D ARM: mstar: Add common dtsi for SSD201/SSD202D ARM: mstar: Add infinity2m support dt-bindings: mstar: Add Honestar SSD201_HT_V2 to mstar boards dt-bindings: vendor-prefixes: Add honestar vendor prefix dt-bindings: mstar: Add binding details for mstar,smpctrl ARM: mstar: Fill in GPIO controller properties for infinity ARM: mstar: Add gpio controller to MStar base dtsi ARM: zynq: Fix incorrect reference to XM013 instead of XM011 ARM: zynq: Convert at25 binding to new description on zc770-xm013 ARM: zynq: Fix OCM mapping to be aligned with binding on zc702 ARM: zynq: Fix leds subnode name for zc702/zybo-z7 ARM: zynq: Rename bus to be align with simple-bus yaml ...
2020-12-17Merge tag 'devicetree-for-5.11' of ↵Linus Torvalds1-3/+0
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: - Add vendor prefixes for bm, gpio-key, mentor, FII, and Ampere - Add ADP5585/ADP5589 and delta,q54sj108a2 to trivial-devices.yaml - Convert fixed-partitions, i2c-gate and fsl,dpaa2-console bindings to schemas - Drop PicoXcell bindings - Drop unused and undocumented 'pnx,timeout' property from LPC32xx - Add 'dynamic-power-coefficient' to Mali GPU bindings - Make 'make dt_binding_check' not error out on warnings - Various minor binding fixes * tag 'devicetree-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (22 commits) dt-bindings: mali-bifrost: Add dynamic-power-coefficient dt-bindings: mali-midgard: Add dynamic-power-coefficient dt-bindings: i2c: dw: cancel mandatory requirements for "#address-cells" and "#size-cells" dt-bindings: Remove PicoXcell bindings ARM: dts: lpc32xx: Remove unused and undocumented 'pnx,timeout' dt-bindings: mtd: convert "fixed-partitions" to the json-schema dt-bindings: vendor-prefixes: Add undocumented bm, gpio-key, and mentor prefixes dt-bindings: pci: rcar-pci-ep: Document missing interrupts property dt-bindings: vendor-prefixes: Add an entry for AmpereComputing.com dt-bindings: vendor-prefixes: correct the spelling of TQ-Systems GmbH dt-bindings: mfd: fix stm32 timers example dt-bindings: trivial-devices: Add delta,q54sj108a2 dt-bindings:i2c:i2c-gate: txt to yaml conversion dt-bindings: add ADP5585/ADP5589 entries to trivial-devices dt-bindings: Correct GV11B GPU register sizes dt-bindings: vendor-prefixes: Add FII dt-bindings: Fix typo on the DesignWare IP reset bindings documentation dt-bindings: Fix error in 'make dtbs_check' when using DT_SCHEMA_FILES dt-bindings: arm: vt8500: remove redundant white-spaces dt-bindings: fsl-imx-drm: fix example compatible string ...
2020-12-16Merge branch 'for-linus' of ↵Linus Torvalds10-10/+10
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - support for inhibiting input devices at request from userspace. If a device implements open/close methods, it can also put device into low power state. This is needed, for example, to disable keyboard and touchpad on convertibles when they are transitioned into tablet mode - now that ordinary input devices can be configured for polling mode, dedicated input polling device implementation has been removed - GTCO tablet driver has been removed, as it used problematic custom HID parser, devices are EOL, and there is no interest from the manufacturer - a new driver for Dialog DA7280 haptic chips has been introduced - a new driver for power button on Dell Wyse 3020 - support for eKTF2132 in ektf2127 driver - support for SC2721 and SC2730 in sc27xx-vibra driver - enhancements for Atmel touchscreens, AD7846 touchscreens, Elan touchpads, ADP5589, ST1232 touchscreen, TM2 touchkey drivers - fixes and cleanups to allow clean builds with W=1 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (86 commits) Input: da7280 - fix spelling mistake "sequemce" -> "sequence" Input: cyapa_gen6 - fix out-of-bounds stack access Input: sc27xx - add support for sc2730 and sc2721 dt-bindings: input: Add compatible string for SC2721 and SC2730 dt-bindings: input: Convert sc27xx-vibra.txt to json-schema Input: stmpe - add axis inversion and swapping capability Input: adp5589-keys - do not explicitly control IRQ for wakeup Input: adp5589-keys - do not unconditionally configure as wakeup source Input: ipx4xx-beeper - convert comma to semicolon Input: parkbd - convert comma to semicolon Input: new da7280 haptic driver dt-bindings: input: Add document bindings for DA7280 MAINTAINERS: da7280 updates to the Dialog Semiconductor search terms Input: elantech - fix protocol errors for some trackpoints in SMBus mode Input: elan_i2c - add new trackpoint report type 0x5F Input: elants - document some registers and values Input: atmel_mxt_ts - simplify the return expression of mxt_send_bootloader_cmd() Input: imx_keypad - add COMPILE_TEST support Input: applespi - use new structure for SPI transfer delays Input: synaptics-rmi4 - use new structure for SPI transfer delays ...
2020-12-14Merge tag 'edac_updates_for_v5.11' of ↵Linus Torvalds1-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras Pull EDAC updates from Borislav Petkov: "Somewhat busier than usual this cycle: - Add support for AST2400 and AST2600 hw to aspeed_edac (Troy Lee) - Remove an orphaned mv64x60_edac driver. Good riddance (Michael Ellerman) - Add a new igen6 driver for Intel client SoCs with an integrated memory controller and using in-band ECC (Qiuxu Zhuo and Tony Luck) - The usual smattering of fixes and cleanups all over" * tag 'edac_updates_for_v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/mv64x60: Remove orphan mv64x60 driver EDAC/aspeed: Add support for AST2400 and AST2600 ARM: dts: aspeed: Add AST2600 EDAC into common devicetree dt-bindings: edac: aspeed-sdram-edac: Add ast2400/ast2600 support EDAC/amd64: Fix PCI component registration EDAC/igen6: ecclog_llist can be static EDAC/i10nm: Add Intel Sapphire Rapids server support EDAC: Add DDR5 new memory type EDAC/i10nm: Use readl() to access MMIO registers MAINTAINERS: Add entry for Intel IGEN6 EDAC driver EDAC/igen6: Add debugfs interface for Intel client SoC EDAC driver EDAC/igen6: Add EDAC driver for Intel client SoCs using IBECC EDAC/synopsys: Return the correct value in mc_probe() MAINTAINERS: Clean up the F: entries for some EDAC drivers EDAC: Add three new memory types EDAC: Fix some kernel-doc markups EDAC: Do not issue useless debug statements in the polling routine EDAC/amd64: Remove unneeded breaks
2020-12-14ARM: dts: lpc32xx: Remove unused and undocumented 'pnx,timeout'Rob Herring1-3/+0
'pnx,timeout' is unused, undocumented and 'pnx' is not a vendor prefix, so let's remove it. Acked-by: Vladimir Zapolskiy <vz@mleia.com> Cc: Sylvain Lemieux <slemieux.tyco@gmail.com> Link: https://lore.kernel.org/r/20201210175238.2721550-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2020-12-10ARM: dts: mmp2-olpc-xo-1-75: clear the warnings when make dtbsZhen Lei1-2/+1
The check_spi_bus_bridge() in scripts/dtc/checks.c requires that the node have "spi-slave" property must with "#address-cells = <0>" and "#size-cells = <0>". But currently both "#address-cells" and "#size-cells" properties are deleted, the corresponding default values are 2 and 1. As a result, the check fails and below warnings is displayed. arch/arm/boot/dts/mmp2.dtsi:472.23-480.6: Warning (spi_bus_bridge): \ /soc/apb@d4000000/spi@d4037000: incorrect #address-cells for SPI bus also defined at arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts:225.7-237.3 arch/arm/boot/dts/mmp2.dtsi:472.23-480.6: Warning (spi_bus_bridge): \ /soc/apb@d4000000/spi@d4037000: incorrect #size-cells for SPI bus also defined at arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts:225.7-237.3 arch/arm/boot/dts/mmp2-olpc-xo-1-75.dtb: Warning (spi_bus_reg): \ Failed prerequisite 'spi_bus_bridge' Because the value of "#size-cells" is already defined as zero in the node "ssp3: spi@d4037000" in arch/arm/boot/dts/mmp2.dtsi. So we only need to explicitly add "#address-cells = <0>" and keep "#size-cells" no change. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Link: https://lore.kernel.org/r/20201207084752.1665-2-thunder.leizhen@huawei.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-09Merge tag 'zynq-dt-for-v5.10' of https://github.com/Xilinx/linux-xlnx into ↵Arnd Bergmann9-108/+142
arm/dt ARM: dts: zynq: DT changes for v5.11 - Adding support for Zturn-v5 - Small DT changes to clean errors from dt_binding_check * tag 'zynq-dt-for-v5.10' of https://github.com/Xilinx/linux-xlnx: ARM: zynq: Fix incorrect reference to XM013 instead of XM011 ARM: zynq: Convert at25 binding to new description on zc770-xm013 ARM: zynq: Fix OCM mapping to be aligned with binding on zc702 ARM: zynq: Fix leds subnode name for zc702/zybo-z7 ARM: zynq: Rename bus to be align with simple-bus yaml ARM: zynq: Fix compatible string for adi,adxl345 chip ARM: zynq: Add Z-turn board V5
2020-12-09Merge tag 'aspeed-5.11-devicetree' of ↵Arnd Bergmann17-247/+2216
git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/dt ASPEED device tree updates for 5.11 - New machines * Bytedance G220A, an AST2500 BMC for an x86 server * Facebook Galaxy100, an AST2400 BMC for a network switch * IBM Rainier 4U, an AST2600 BMC for a PowerPC server - Reworking of Facebook device trees to use common dtsi - A 64MB flash layout used by the G220A - Misc updates to tiogapass, ethanolx, s2600wf, tacoma and rainier * tag 'aspeed-5.11-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed: (25 commits) ARM: dts: aspeed: ast2600evb: Add MAC0 ARM: dts: aspeed: rainier: Don't shout addresses ARM: dts: aspeed: rainier: Mark FSI SPI controllers as restricted ARM: dts: tacoma: Add reserved memory for ramoops ARM: dts: rainier: Add reserved memory for ramoops ARM: dts: tacoma: Fix node vs reg mismatch for flash memory ARM: dts: aspeed: rainier: Add 4U device-tree arm: dts: aspeed: tiogapass: Enable second MAC ARM: dts: aspeed: minipack: Fixup I2C tree ARM: dts: aspeed: wedge400: Fix FMC flash0 layout ARM: dts: aspeed: Add Facebook Galaxy100 (AST2400) BMC ARM: dts: aspeed: wedge100: Use common dtsi ARM: dts: aspeed: wedge40: Use common dtsi ARM: dts: aspeed: Common dtsi for Facebook AST2400 Network BMCs ARM: dts: aspeed: amd-ethanolx: Add GPIO line names ARM: dts: aspeed: amd-ethanolx: Enable devices for the iKVM functionality ARM: dts: aspeed: amd-ethanolx: Enable KCS channel 3 ARM: dts: aspeed: tiogapass: Remove vuart ARM: dts: Fix label address for 64MiB OpenBMC flash layout ARM: dts: aspeed: g220a: Add some gpios ... Link: https://lore.kernel.org/r/CACPK8Xfd7AmuEaUdFfYLu4ktcrpTnYUgwQSxUbC-McB02hvo_g@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-09ARM: mstar: Wire up smpctrl for SSD201/SSD202DDaniel Palmer1-0/+5
Add the specific compat string for the smpctrl registers to the SSD201/SSD202D common dtsi. Signed-off-by: Daniel Palmer <daniel@0x0f.com> Link: https://lore.kernel.org/r/20201201134330.3037007-10-daniel@0x0f.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-09ARM: mstar: Add smp ctrl registers to infinity2m dtsiDaniel Palmer1-0/+7
Add the smpctrl registers to the infinity2m dtsi so that the second CPU can be enabled on chips in this family. Signed-off-by: Daniel Palmer <daniel@0x0f.com> Link: https://lore.kernel.org/r/20201201134330.3037007-9-daniel@0x0f.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-09ARM: mstar: Add dts for Honestar ssd201htv2Daniel Palmer2-0/+26
Add a dts for the Honestar ssd201htv2 devkit. This is for the board populated with a SSD202D. Signed-off-by: Daniel Palmer <daniel@0x0f.com> Link: https://lore.kernel.org/r/20201201134330.3037007-8-daniel@0x0f.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-09ARM: mstar: Add chip level dtsi for SSD202DDaniel Palmer1-0/+14
Add a chip level dtsi for the SigmaStar SSD202D Signed-off-by: Daniel Palmer <daniel@0x0f.com> Link: https://lore.kernel.org/r/20201201134330.3037007-7-daniel@0x0f.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-09ARM: mstar: Add common dtsi for SSD201/SSD202DDaniel Palmer1-0/+7
The SSD201 and SSD202D are basically the same chip with a different DDR die packaged (64MB DDR2 or 128MB DDR3). This patch adds a shared dtsi for the common parts of these chips like gpio, pinctrl etc. Signed-off-by: Daniel Palmer <daniel@0x0f.com> Link: https://lore.kernel.org/r/20201201134330.3037007-6-daniel@0x0f.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-09ARM: mstar: Add infinity2m supportDaniel Palmer2-1/+16
The infinity2m series of chips are like the other Mstar/Sigmastar chips in that they have a Cortex A7 system with DDR memory integrated in a single package. The infinity2m chips are intended for recording the incoming streams from IP cameras. So instead of video encoders they have video decoders, instead of a camera interface they have display hardware and so on. Aside from the above points the big difference about these chips is that they include a second Cortex A7 core. Signed-off-by: Daniel Palmer <daniel@0x0f.com> Link: https://lore.kernel.org/r/20201201134330.3037007-5-daniel@0x0f.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-09ARM: mstar: Fill in GPIO controller properties for infinityDaniel Palmer1-0/+7
Fill in the properties needed to use the GPIO controller in the infinity and infinity3 chips. Signed-off-by: Daniel Palmer <daniel@0x0f.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20201129110803.2461700-6-daniel@0x0f.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-09ARM: mstar: Add gpio controller to MStar base dtsiDaniel Palmer1-0/+10
The GPIO controller is at the same address in all of the currently known chips so create a node for it in the base dtsi. Some extra properties are needed to actually use it so disable it by default. Signed-off-by: Daniel Palmer <daniel@0x0f.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20201129110803.2461700-5-daniel@0x0f.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-09ARM: zynq: Fix incorrect reference to XM013 instead of XM011Michal Simek1-1/+1
Fix comment about targeted extension card. It was likely just c&p error. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/39e16e667aa8f132496092d4fa554935ddd5a55f.1606399500.git.michal.simek@xilinx.com
2020-12-09ARM: zynq: Convert at25 binding to new description on zc770-xm013Michal Simek1-4/+3
The commit f8f79fa6bb25 ("dt-bindings: at25: convert the binding document to yaml") converted binding to yaml and 3 deprecated properties pop up. The patch is fixing these warnings: .../zynq-zc770-xm013.dt.yaml: eeprom@2: 'pagesize' is a required property .../zynq-zc770-xm013.dt.yaml: eeprom@2: 'size' is a required property .../zynq-zc770-xm013.dt.yaml: eeprom@2: 'address-width' is a required property >From schema: .../Documentation/devicetree/bindings/eeprom/at25.yaml by converting them to new binding. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/be2c1125d98386033e182012eb08986924707a76.1606397101.git.michal.simek@xilinx.com
2020-12-09ARM: zynq: Fix OCM mapping to be aligned with binding on zc702Michal Simek1-0/+6
The commit f69629919942 ("dt-bindings: sram: Convert SRAM bindings to json-schema") converted binding to yaml and some missing required properties started to be reported. Align binding based on it. The patch is fixing these warnings: .../zynq-zc702.dt.yaml: sram@fffc0000: '#address-cells' is a required property .../zynq-zc702.dt.yaml: sram@fffc0000: '#size-cells' is a required property .../zynq-zc702.dt.yaml: sram@fffc0000: 'ranges' is a required property >From schema: .../Documentation/devicetree/bindings/sram/sram.yaml Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/87c02786ccd8d7827827a9d95a8737bb300caeb0.1606397101.git.michal.simek@xilinx.com
2020-12-09ARM: zynq: Fix leds subnode name for zc702/zybo-z7Michal Simek2-2/+2
Fix the leds subnode names to match (^led-[0-9a-f]$|led). Similar change has been also done by commit 9a19a39ee48b ("arm64: dts: zynqmp: Fix leds subnode name for zcu100/ultra96 v1"). The patch is fixing these warnings: .../zynq-zc702.dt.yaml: leds: 'ds23' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' >From schema: .../Documentation/devicetree/bindings/leds/leds-gpio.yaml .../zynq-zybo-z7.dt.yaml: gpio-leds: 'ld4' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' >From schema: .../Documentation/devicetree/bindings/leds/leds-gpio.yaml Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/607a66783b129294364abf09a6fc8abd241ff4ee.1606397101.git.michal.simek@xilinx.com
2020-12-09ARM: zynq: Rename bus to be align with simple-bus yamlMichal Simek1-1/+1
Rename amba to AXI. Based on Xilinx Zynq TRM (Chapter 5) chip is "AXI point-to-point channels for communicating addresses, data, and response transactions between master and slave clients. This ARM AMBA 3.0..." Issues are reported as: .. amba: $nodename:0: 'amba' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' >From schema: ../github.com/devicetree-org/dt-schema/dtschema/schemas/simple-bus.yaml Similar change has been done for Xilinx ZynqMP SoC. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/8a4bc80debfbb79c296e76fc1e4c173e62657286.1606397101.git.michal.simek@xilinx.com
2020-12-09ARM: zynq: Fix compatible string for adi,adxl345 chipMichal Simek1-1/+1
The commit e359a29225dd ("dt-bindings: iio: accel: adxl345: switch to YAML bindings") switched binding to yaml and the following error pop up: ../zynq-zturn-v5.dt.yaml: accelerometer@53: compatible: 'oneOf' conditional failed, one must be fixed: ['adi,adxl345', 'adxl345', 'adi,adxl34x', 'adxl34x'] is too long Additional items are not allowed ('adi,adxl34x', 'adxl34x' were unexpected) Additional items are not allowed ('adxl345', 'adi,adxl34x', 'adxl34x' were unexpected) 'adi,adxl346' was expected 'adi,adxl345' was expected Use only one compatible string to be aligned with the binding. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/a9075ab54df13461380e46d3002302d3672325b5.1606397101.git.michal.simek@xilinx.com
2020-12-09Merge tag 'amlogic-dt64-2' of ↵Arnd Bergmann2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt arm64: dts: amlogic updates for v5.11, round 2 - audio support for several more boards - PHY timing fixes * tag 'amlogic-dt64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: arm64: dts: meson: add i2c3/rtc nodes and vrtc alias to GT-King/GT-King-Pro arm64: dts: meson: g12b: w400: fix PHY deassert timing requirements arm64: dts: meson: g12a: x96-max: fix PHY deassert timing requirements ARM: dts: meson: fix PHY deassert timing requirements arm64: dts: meson: fix PHY deassert timing requirements arm64: dts: meson: g12b: odroid-n2: fix PHY deassert timing requirements arm64: dts: meson: minor fixups for Khadas VIM/VIM2 dts arm64: dts: meson: add audio playback to wetek-play2 arm64: dts: meson: add audio playback to wetek-hub arm64: dts: meson: add audio playback to odroid-c2 arm64: dts: meson: add audio playback to nanopi-k2 arm64: dts: meson: add audio playback to khadas-vim2 arm64: dts: meson: add audio playback to khadas-vim arm64: dts: meson: add audio playback to a95x arm64: dts: meson-axg: add GE2D node Link: https://lore.kernel.org/r/7ho8j4gkxo.fsf@baylibre.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-09Merge tag 'samsung-dt-5.11-3' of ↵Arnd Bergmann3-7/+4
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt Samsung DTS ARM changes for v5.11, part three 1. S3C bindings and DTS cleanup, 2. Correct the clock rates for SPI0 in Artik 5 which is a fix for recently introduced Ethernet on SPI on Artik 5 board. * tag 'samsung-dt-5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: exynos: Reduce assigned-clocks entries for SPI0 on Artik5 board ARM: dts: s3c6410: correct SMDK6410 board compatible ARM: dts: s3c24xx: add SMDK2416 board compatible dt-bindings: arm: samsung: document S3C6410-based boards binding dt-bindings: arm: samsung: document SMDK2416 board binding Link: https://lore.kernel.org/r/20201207074528.4475-2-krzk@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-09Merge tag 'v5.11-rockchip-dts32-1' of ↵Arnd Bergmann6-4/+65
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt Veyron backlight fix, another fix for dtbs-check and some additions to the rk3288-based VMARC boards. * tag 'v5.11-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: Add SDIO0 node for VMARC SOM ARM: dts: rockchip: Add rtc node for VMARC SOM ARM: dts: rockchip: rename wdt nodename to watchdog on rv1108 ARM: dts: rockchip: Remove 0 point from brightness-levels on rk3288-veyron Link: https://lore.kernel.org/r/4582475.GXAFRqVoOG@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-09Merge tag 'at91-dt-5.11-2' of ↵Arnd Bergmann9-174/+35
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt AT91 DT for 5.11 #2: - switch to new TCB PWM bindings - rework ADC bindings - fix sama5d2 securam and can1 * tag 'at91-dt-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: at91: sama5d2: fix CAN message ram offset and size ARM: dts: at91: sama5d2: map securam as device ARM: dts: at91: sam9x60ek: remove bypass property ARM: dts: at91: remove deprecated ADC properties ARM: dts: at91: at91sam9rl: fix ADC triggers ARM: dts: at91: sama5d3: use proper ADC compatible ARM: dts: at91: kizbox: switch to new pwm-atmel-tcb binding Link: https://lore.kernel.org/r/20201206013840.GA627225@piout.net Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-09Merge tag 'imx-dt-5.11' of ↵Arnd Bergmann60-196/+2445
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX device tree update for 5.11: - New board support: imx6dl-alti6p, imx6dl-lanmcu, mx6qp-prtwd3, imx6ul-phytec-segin and imx7d-flex-concentrator. - Fix schema warnings for pwm-leds, watchdog and GPIO hog devices. - A few patches from Krzysztof Kozlowski to correct compatibles for i.MX6/7 boards. - A series from Matthias Schiffer to polish imx7-mba7 board support. - Update i.MX6/7 device trees for fsl,stop-mode support. - Correct fsl,rcpm-wakeup of LS1021A to get flextimer wake-up work. - A series of patch from Stefan Riedmueller to update phytec and segin devices. - Other small and random changes. * tag 'imx-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (40 commits) ARM: dts: imx28: Fix label name for L2 switch ARM: dts: add Protonic WD3 board ARM: dts: imx6qdl-kontron-samx6i: increase i2c-frequency ARM: dts: imx7: add support for kamstrup flex concentrator ARM: dts: ls1021a: update calibration table for TMU module ARM: dts: ls1021a: fix rcpm failed to claim resource ARM: dts: ls1021a: fix flextimer failed to wake system ARM: dts: imx50-kobo-aura: Enable eKTF2132 touchscreen ARM: dts: imx: Change flexcan node name to "can" ARM: dts: imx6q-pico: fix board compatibles ARM: dts: add Van der Laan LANMCU board ARM: dts: add Altesco I6P board ARM: dts: imx6ul: segin: peb-av-02: Mark stmpe touch as wakeup-source ARM: dts: imx6ul: phytec: Add support for optional PEB-AV-02 LCD adapter ARM: dts: imx6ul: segin: Add phyBOARD-Segin with eMMC phyCORE-i.MX6UL ARM: dts: imx50-kobo-aura: Add 'grp' suffix to pinctrl node names ARM: dts: imx: add usb alias ARM: dts: imx6/7: sync fsl,stop-mode with current flexcan driver ARM: dts: imx: Fix schema warnings for pwm-leds ARM: dts: imx7s-warp: correct vendor in compatible to Element14 ... Link: https://lore.kernel.org/r/20201202142717.9262-4-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-09Merge tag 'samsung-dt-5.11-2' of ↵Arnd Bergmann10-8/+1156
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt Samsung DTS ARM changes for v5.11, part two 1. Add devicetree of Samsung Galaxy Note 10.1 tablets (GT-N8010/GT-N8013), called P4 Note. These are quite old but still functional devices, based on Exynos4412. 2. Minor cleanups in Odroid XU3 Ethernet. 3. Minor fixes: ADC io-channel-ranges and P4 Note touchscreen GPIO polarity. * tag 'samsung-dt-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: exynos: switch Atmel mxt reset GPIO to active low on P4 Note ARM: dts: s5pv210: Drop unneeded io-channel-ranges property in Aries ARM: dts: s5pv210: Drop incorrect use of io-channel-ranges property ARM: dts: exynos: Drop incorrect use of io-channel-ranges ARM: dts: exynos: add Samsung's Exynos4412-based P4 Note boards dt-bindings: arm: samsung: document bindings for P4 Note family board ARM: dts: exynos: Add an alias for the Ethernet interface on Odroid XU3 ARM: dts: exynos: Fix Ethernet interface description on Odroid XU3 Link: https://lore.kernel.org/r/20201201204404.22675-2-krzk@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-09Merge tag 'keystone_dts_for_5.11' of ↵Arnd Bergmann1-0/+112
git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into arm/dt ARM: dts: Keystone DTS update for v5.11 - HDMI Support - Analog Audio data support * tag 'keystone_dts_for_5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone: ARM: dts: keystone-k2g-evm: add HDMI and analog audio data Link: https://lore.kernel.org/r/1606851472-26593-1-git-send-email-santosh.shilimkar@oracle.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-09Merge tag 'qcom-dts-for-5.11' of ↵Arnd Bergmann3-10/+356
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm DT updates for 5.11 This adds support for SD card, WiFi, LED, touchscreeni, touchkey and fuel gauge to the Samsung Galaxy S5. Nexus 5 also gains fuel gauge support. Finally IPQ6016 gains support for the QPIC NAND controller. * tag 'qcom-dts-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm64: dts: ipq6018: Add the QPIC peripheral nodes ARM: dts: qcom-pma8084: Drop incorrect use of io-channel-ranges ARM: dts: qcom: msm8974-lge-nexus5: Add fuel gauge ARM: dts: qcom: msm8974-klte: Add fuel gauge ARM: dts: qcom: msm8974-klte: Add support for SD card ARM: dts: qcom: msm8974-klte: Add support for wifi ARM: dts: qcom: msm8974-klte: Add gpio expander chip ARM: dts: qcom: msm8974-klte: Add support for led ARM: dts: qcom: msm8974-klte: Add support for touchscreen ARM: dts: qcom: msm8974-klte: Add support for touchkey ARM: dts: qcom: msm8974-klte: Merge pinctrl nodes Link: https://lore.kernel.org/r/20201130190148.345302-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-09Merge tag 'mvebu-dt-5.11-1' of ↵Arnd Bergmann26-33/+810
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/dt mvebu dt for 5.11 (part 1) - Add support for MikroTik CRS3xx switches - Add support for RD-AC3X-48G4X2XL board : Armada 382 SoC connected to Prestera AC3X ASIC through PCI - Clean-up kirkwood device tree: replace "ok" by "okay" - Improve device tree for PCA953x gpio expander nodes - Use compliant node name for USB3 on armada 375 - 98dx3236 SoCs: - remove non-existent i2c1 - add i2c0 pinctrl information - Improve device tree for Turris Omnia * tag 'mvebu-dt-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: ARM: dts: mvebu: Add device tree for RD-AC3X-48G4X2XL board arm: dts: marvell: armada-375: Harmonize DWC USB3 DT nodes name ARM: dts: turris-omnia: remove unneeded status = "okay" properties ARM: dts: turris-omnia: update ethernet-phy node and handle name ARM: dts: turris-omnia: add LED controller node ARM: dts: turris-omnia: add SFP node ARM: dts: turris-omnia: describe switch interrupt ARM: dts: turris-omnia: add comphy handle to eth2 ARM: dts: turris-omnia: enable HW buffer management ARM: dts: Add i2c0 pinctrl information for 98dx3236 ARM: dts: Remove non-existent i2c1 from 98dx3236 ARM: dts: armada: align GPIO hog names with dtschema ARM: dts: dove: fix PCA95xx GPIO expander properties on A510 ARM: dts: kirkwood: replace status value "ok" by "okay" ARM: dts: mvebu: Add CRS328-4C-20S-4S board ARM: dts: mvebu: Add CRS305-1G-4S board ARM: dts: mvebu: Add CRS326-24G-2S board Link: https://lore.kernel.org/r/87h7p6j0m7.fsf@BL-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-09Merge tag 'nuvoton-5.11-devicetree' of ↵Arnd Bergmann10-21/+4861
git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/dt Nuvoton device tree updates for 5.11 - New machines * Fii Kudo, a NPCM730 BMC * Quanta GSJ, a NPCM750 BMC * Qanta Olympus RunBMC, a NPCM750 BMC - Updates to the common device trees and NCPM750 EVB * tag 'nuvoton-5.11-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc: dt-bindings: vendor-prefixes: Add FII ARM: dts: nuvoton: Add Fii Kudo system ARM: dts: nuvoton: Add NPCM7xx RunBMC Olympus Quanta machine ARM: dts: nuvoton: Add Quanta GSJ BMC ARM: dts: nuvoton: Add Quanta GSJ BMC pinctrl ARM: dts: nuvoton: Add Nuvoton NPCM730 device tree ARM: dts: nuvoton: Add new device nodes to NPCM750 EVB ARM: dts: nuvoton: Add new device nodes ARM: dts: nuvoton: Add pinctrl and GPIO node ARM: dts: nuvoton: Modify timer register size ARM: dts: nuvoton: Modify clock parameters Link: https://lore.kernel.org/r/CACPK8Xd8RaLv_p6t9ckBwCwtZww+2YYOAoAYQdvni0dxc2mS7A@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-09Merge tag 'arm-soc/for-5.11/devicetree' of ↵Arnd Bergmann30-132/+150
https://github.com/Broadcom/stblinux into arm/dt This pull request contains Broadcom ARM-based SoCs changes for 5.11, please pull the following: - Vivek updates the Linksys EA9500 DTS by adding the two additional switch port nodes (5 & 7), providing a flash partition layout to make the device usable with OpenWrt, and finally switches to using the pin controller rather than using mdio-mux to get the same outcome. - Serge fixes the USB Device Tree nodes unit name to be conformant to the recommended name patterns. - Rafal re-arranges all the nodes that belonged to the CRU block to be under the CRU node (such as PLLs). He also disables the USB3 PHY node for devices that lack USB3 and adds USB3 support to the Luxul XWR-3150 DTS. - Jonathan drops the incorrect 'io-channel-ranges' from the Cygnus SoC DTSI. - Maxime disables the Wi-Fi frequencies (around 2.4GHz) for HDMI on the Raspberry Pi 4 due to some cross-talk between the two blocks. - Pavel updates the DWC2 USB controller RX FIFO sizes to be more accurate for all BCM283x (Raspberr Pi) SoCs. - Florian updates all BCM5301x and NSP Device Tree files to allow switching the Broadcom B53 Ethernet switch device tree binding to YAML. * tag 'arm-soc/for-5.11/devicetree' of https://github.com/Broadcom/stblinux: (22 commits) dt-bindings: net: dsa: b53: Add YAML bindings ARM: dts: NSP: Provide defaults ports container node ARM: dts: NSP: Add a SRAB compatible string for each board ARM: dts: NSP: Fix Ethernet switch SGMII register name ARM: dts: NSP: Update ethernet switch node name ARM: dts: BCM5301X: Provide defaults ports container node ARM: dts: BCM5301X: Add a default compatible for switch node ARM: dts: BCM5301X: Update Ethernet switch node name dt-bindings: net: dsa: Document sfp and managed properties dt-bindings: net: dsa: Extend switch nodes pattern ARM: dts: bcm283x: increase dwc2's RX FIFO size ARM: dts: rpi-4: disable wifi frequencies ARM: dts: Cygnus: Drop incorrect io-channel-ranges property. ARM: dts: BCM5301X: Enable USB 3 PHY on Luxul XWR-3150 ARM: dts: BCM5301X: Disable USB 3 PHY on devices without USB 3 ARM: dts: BCM5301X: Move CRU devices to the CRU node ARM: dts: BCM5301X: Linksys EA9500 make use of pinctrl ARM: dts: BCM5301X: Use corretc pinctrl compatible for 4709x ARM: dts: BCM5301X: Linksys EA9500 add fixed partitions ARM: dts: BCM5310X: Harmonize xHCI DT nodes name ... Link: https://lore.kernel.org/r/20201128163410.1691529-3-f.fainelli@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-09Merge tag 'sunxi-dt-for-5.11' of ↵Arnd Bergmann9-0/+418
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt Our usual bunch of patches to support the Allwinner SoCs, this time adding: - Some nice pinephone additions - I2S support for the A64, H3, H5 and H6 - New boards: Elimo Impetus, Elimo Initium, FriendlyArm ZeroPi, NanoPi R1 * tag 'sunxi-dt-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (21 commits) ARM: dts: sun8i-h2-plus-bananapi-m2-zero: add gpio-line-names ARM: dts: sun8i: h3: Add initial NanoPi R1 support arm64: dts: allwinner: pinephone: Use generic sensor node names ARM: dts: sun8i: s3: Add dts for the Elimo Initium SBC dt-bindings: arm: sunxi: add Elimo bindings ARM: dts: sun8i: s3: Add dtsi for the Elimo Impetus SoM arm64: dts: allwinner: pinephone: Add Bluetooth support arm64: dts: allwinner: pinephone: Add WiFi support arm64: dts: allwinner: pinephone: Add light/proximity sensor arm64: dts: allwinner: pinephone: Add LED flash arm64: dts: allwinner: pinephone: Set ALDO3 to exactly 3v0 arm64: dts: allwinner: pinephone: Remove AC power supply arm: dts: sunxi: h3/h5: Add I2S2 node arm64: dts: allwinner: a64: Add I2S2 node arm64: dts: allwinner: h6: Add I2S1 node arm64: dts: allwinner: h6: PineH64 model B: Add wifi ARM: dts: sun8i-v3s: Add I2C1 PB pins description ARM: dts: sun8i: V3/S3: Add UART1 pin definitions to the V3/S3 dtsi dt-bindings: vendors: add Elimo Engineering vendor prefix ARM: dts: sun8i: add FriendlyArm ZeroPi support ... Link: https://lore.kernel.org/r/551fdf4f-8a0b-4a22-ba49-b4f61520a9ab.lettre@localhost Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-09Merge tag 'at91-dt-5.11' of ↵Arnd Bergmann12-41/+62
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt AT91 DT for 5.11: - fix USB host pinctrl - fix DT schema warnings * tag 'at91-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: at91: sama5d3_xplained: add pincontrol for USB Host ARM: dts: at91: sama5d4_xplained: add pincontrol for USB Host ARM: dts: at91: sam9x60: add pincontrol for USB Host ARM: dts: at91: at91-sama5d27_som1: fix EEPROM compatible ARM: dts: at91: Fix schema warnings for pwm-leds ARM: dts: at91: smartkiz: Reference led node directly Link: https://lore.kernel.org/r/20201127220403.GA1735041@piout.net Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-07ARM: dts: meson: fix PHY deassert timing requirementsStefan Agner2-2/+2
According to the datasheet (Rev. 1.9) the RTL8211F requires at least 72ms "for internal circuits settling time" before accessing the PHY registers. On similar boards with the same PHY this fixes an issue where Ethernet link would not come up when using ip link set down/up. Fixes: a2c6e82e5341 ("ARM: dts: meson: switch to the generic Ethernet PHY reset bindings") Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> # on Odroid-C1+ Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/ff78772b306411e145769c46d4090554344db41e.1607363522.git.stefan@agner.ch
2020-12-07Merge tag 'imx-fixes-5.10-5' of ↵Arnd Bergmann2-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.10, round 5: - Fix a regression on SoC revision detection with ANATOP, that is introduced by commit 4a4fb66119eb ("ARM: imx: Add missing of_node_put()"). - Drop PAD_GPIO_6 from imx6qdl-wandboard ENET pin group, as the pin is used by camera sensor now. - Fix I2C3_SCL pinmux on imx6qdl-kontron-samx6i board, so that SoM EEPROM can be accessed. * tag 'imx-fixes-5.10-5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx6qdl-kontron-samx6i: fix I2C_PM scl pin ARM: dts: imx6qdl-wandboard-revd1: Remove PAD_GPIO_6 from enetgrp ARM: imx: Use correct SRC base address Link: https://lore.kernel.org/r/20201201091820.GW4072@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-07Merge tag 'sunxi-fixes-for-5.10-2' of ↵Arnd Bergmann5-11/+11
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes A few more RGMII-ID fixes, and a bunch of other more random fixes * tag 'sunxi-fixes-for-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sun7i: pcduino3-nano: enable RGMII RX/TX delay on PHY ARM: dts: sun8i: v3s: fix GIC node memory range ARM: dts: sun8i: v40: bananapi-m2-berry: Fix ethernet node ARM: dts: sun8i: r40: bananapi-m2-berry: Fix dcdc1 regulator ARM: dts: sun7i: bananapi: Enable RGMII RX/TX delay on Ethernet PHY ARM: dts: s3: pinecube: align compatible property to other S3 boards ARM: sunxi: Add machine match for the Allwinner V3 SoC arm64: dts: allwinner: h6: orangepi-one-plus: Fix ethernet Link: https://lore.kernel.org/r/1280f1de-1b6d-4cc2-8448-e5a9096a41e8.lettre@localhost Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-07ARM: dts: aspeed: Add AST2600 EDAC into common devicetreeTroy Lee1-0/+6
Add Aspeed AST2600 EDAC node into the common devicetree. Signed-off-by: Troy Lee <troy_lee@aspeedtech.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lkml.kernel.org/r/20201207090013.14145-2-troy_lee@aspeedtech.com
2020-12-03ARM: dts: at91: sama5d2: fix CAN message ram offset and sizeNicolas Ferre1-3/+3
CAN0 and CAN1 instances share the same message ram configured at 0x210000 on sama5d2 Linux systems. According to current configuration of CAN0, we need 0x1c00 bytes so that the CAN1 don't overlap its message ram: 64 x RX FIFO0 elements => 64 x 72 bytes 32 x TXE (TX Event FIFO) elements => 32 x 8 bytes 32 x TXB (TX Buffer) elements => 32 x 72 bytes So a total of 7168 bytes (0x1C00). Fix offset to match this needed size. Make the CAN0 message ram ioremap match exactly this size so that is easily understandable. Adapt CAN1 size accordingly. Fixes: bc6d5d7666b7 ("ARM: dts: at91: sama5d2: add m_can nodes") Reported-by: Dan Sneddon <dan.sneddon@microchip.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Tested-by: Cristian Birsan <cristian.birsan@microchip.com> Cc: stable@vger.kernel.org # v4.13+ Link: https://lore.kernel.org/r/20201203091949.9015-1-nicolas.ferre@microchip.com
2020-12-03ARM: dts: at91: sama5d2: map securam as deviceClaudiu Beznea1-0/+1
Due to strobe signal not being propagated from CPU to securam the securam needs to be mapped as device or strongly ordered memory to work properly. Otherwise, updating to one offset may affect the adjacent locations in securam. Fixes: d4ce5f44d4409 ("ARM: dts: at91: sama5d2: Add securam node") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/1606903025-14197-3-git-send-email-claudiu.beznea@microchip.com
2020-12-03ARM: dts: at91: sam9x60ek: remove bypass propertyClaudiu Beznea1-4/+0
atmel,osc-bypass property sets the bit 1 at main oscillator register. On SAM9X60 this bit is not valid according to datasheet (chapter 28.16.9 PMC Clock Generator Main Oscillator Register). Fixes: 1e5f532c2737 ("ARM: dts: at91: sam9x60: add device tree for soc and board") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Marco Cardellini <marco.cardellini@microchip.com> Link: https://lore.kernel.org/r/1606903025-14197-2-git-send-email-claudiu.beznea@microchip.com
2020-12-03ARM: dts: exynos: Reduce assigned-clocks entries for SPI0 on Artik5 boardMarek Szyprowski1-5/+2
Commit 2024b130b0c8 ("ARM: dts: exynos: Add Ethernet to Artik 5 board") added ethernet chip on SPI0 bus and the whole bunch of assigned clock entries to ensure proper clock rates and topology. Limit the assigned clock parents only to the direct clocks of the SPI0 device and assume that MPLL clock is already properly configured. The applied clock topology was incorrect as some clocks between were missing, what resulted in the following warning: clk: failed to reparent div_mpll_pre to mout_mpll: -22 Fixes: 2024b130b0c8 ("ARM: dts: exynos: Add Ethernet to Artik 5 board") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20201202122029.22198-1-m.szyprowski@samsung.com Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-12-02ARM: dts: s3c6410: correct SMDK6410 board compatibleKrzysztof Kozlowski1-1/+1
The SMDK6410 DTS was incorrectly called mini6410, probably copy-paste from FriendlyARM Mini6410 board. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201117201106.128813-4-krzk@kernel.org
2020-12-02ARM: dts: s3c24xx: add SMDK2416 board compatibleKrzysztof Kozlowski1-1/+1
Add a compatible for SMDK2416 board next to the SoC compatible. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201117201106.128813-3-krzk@kernel.org
2020-12-01ARM: dts: at91: remove deprecated ADC propertiesAlexandre Belloni6-154/+0
atmel,adc-res, atmel,adc-res-names and the trigger nodes are not parsed by the driver anymore and the information is now defined in the driver data. Also remove the leftover #address-cells and #size-cells that were used when the trigger nodes had a unit-address. Finally, the default is already to use the highest resoution. Remove atmel,adc-use-res from the SoC dtsi. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Ludovic Desroches <ludovic.desroches@microchip.com> Link: https://lore.kernel.org/r/20201128222818.1910764-11-alexandre.belloni@bootlin.com
2020-12-01ARM: dts: at91: at91sam9rl: fix ADC triggersAlexandre Belloni1-8/+11
The triggers for the ADC were taken from at91sam9260 dtsi but are not correct. Fixes: a4c1d6c75822 ("ARM: at91/dt: sam9rl: add lcd, adc, usb gadget and pwm support") Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20201128222818.1910764-10-alexandre.belloni@bootlin.com
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-15 05:54:58 +0300