summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts
AgeCommit message (Collapse)AuthorFilesLines
2020-07-18ARM: dts: rockchip: Fix VBUS on rk3288-vyasaMichael Trimarchi1-2/+1
Connect the voltage regulator of vbus to the otg connector. Depending on the current mode this is enabled (in "host" mode") or disabled (in "peripheral" mode). The regulator must be updated if the controller is configured in "otg" mode and the status changes between "host" and "peripheral". Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Link: https://lore.kernel.org/r/20200707101214.2301768-1-michael@amarulasolutions.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-07-18ARM: dts: rockchip: Add Radxa Rock Pi N8 initial supportJagan Teki2-0/+18
Rock Pi N8 is a Rockchip RK3288 based SBC, which has - VMARC RK3288 SOM (as per SMARC standard) from Vamrs. - Compatible carrier board from Radxa. VAMRC RK3288 SOM need to mount on top of radxa dalang carrier board for making Rock Pi N8 SBC. So, add initial support for Rock Pi N8 by including rk3288, rk3288 vamrc-som and raxda dalang carrier board dtsi files. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Link: https://lore.kernel.org/r/20200715083418.112003-8-jagan@amarulasolutions.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-07-18ARM: dts: rockchip: Add VMARC RK3288 SOM initial supportJagan Teki1-0/+270
VMARC RK3288 SOM is a standard SMARC SOM design with Rockchip RK3288 SoC, which is designed by Vamrs. Specification: - Rockchip RK3288 - PMIC: RK808 - eMMC: 16GB/32GB/64GB - SD slot - 2xUSB-2.0, 1xUSB3.0 - USB-C for power supply - Ethernet - HDMI, MIPI-DSI/CSI, eDP Add initial support for VMARC RK3288 SOM, this would use with associated carrier board. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Link: https://lore.kernel.org/r/20200715083418.112003-7-jagan@amarulasolutions.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-07-18arm64: dts: rk3399pro: vmarc-som: Move common properties into CarrierJagan Teki1-4/+14
Some of gmac, sdmmc node properties are common across rk3288 and rk3399pro SOM's so move them into Carrier dtsi. Chosen node is specific to rk3399pro configure SBC, so move it into RockPI N10 dts. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Link: https://lore.kernel.org/r/20200715083418.112003-5-jagan@amarulasolutions.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-07-18arm64: dts: rk3399pro: vmarc-som: Move supply regulators into CarrierJagan Teki1-0/+19
Supply regulators are common across different variants of vmarc SOM's since the Type C power controller IC is part of the carrier board. So, move the supply regulators into carrier board dtsi. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Link: https://lore.kernel.org/r/20200715083418.112003-4-jagan@amarulasolutions.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-07-18ARM: dts: rockchip: dalang-carrier: Move i2c nodes into SOMJagan Teki1-32/+0
I2C nodes and associated slave devices defined in Carrier board are specific to rk3399pro vmrac SOM. So, move them into SOM dtsi. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Link: https://lore.kernel.org/r/20200715083418.112003-2-jagan@amarulasolutions.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-07-18ARM: dts: rockchip: Add 'arm,pl330-periph-burst' for dmacSugar Zhang5-0/+9
This patch Add the quirk to specify to use burst transfer for better compatible and higher performance. Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com> Link: https://lore.kernel.org/r/1593439866-68459-1-git-send-email-sugar.zhang@rock-chips.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-07-18Merge tag 'arm-fixes-5.8-2' of ↵Linus Torvalds5-8/+14
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc into master Pull ARM SoC fixes from Arnd Bergmann: "This time there are a number of actual code fixes, plus a small set of device tree issues getting addressed: Renesas: - one defconfig cleanup to allow a later Kconfig change Intel socfpga: - enable QSPI devices on some machines - fix DTC validation warnings TI OMAP: - Two DEBUG_ATOMIC_SLEEP fixes for ti-sysc interconnect target module driver - A regression fix for ti-sysc no-idle handling that caused issues compared to earlier platform data based booting - A fix for memory leak for omap_hwmod_allocate_module - Fix d_can driver probe for am437x NXP i.MX: - A couple of fixes on i.MX platform device registration code to stop the use of invalid IRQ 0. - Fix a regression seen on ls1021a platform, caused by commit 52102a3ba6a61 ("soc: imx: move cpu code to drivers/soc/imx"). - Fix a misconfiguration of audio SSI on imx6qdl-gw551x board. Amlogic Meson: - misc DT fixes - SoC ID fixes to detect all chips correctly" * tag 'arm-fixes-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: arm64: dts: spcfpga: Align GIC, NAND and UART nodenames with dtschema ARM: dts: socfpga: Align L2 cache-controller nodename with dtschema arm64: dts: stratix10: increase QSPI reg address in nand dts file arm64: dts: stratix10: add status to qspi dts node arm64: dts: agilex: add status to qspi dts node ARM: dts: Fix dcan driver probe failed on am437x platform ARM: OMAP2+: Fix possible memory leak in omap_hwmod_allocate_module arm64: defconfig: Enable CONFIG_PCIE_RCAR_HOST soc: imx: check ls1021a ARM: imx: Remove imx_add_imx_dma() unused irq_err argument ARM: imx: Provide correct number of resources when registering gpio devices ARM: dts: imx6qdl-gw551x: fix audio SSI bus: ti-sysc: Do not disable on suspend for no-idle bus: ti-sysc: Fix sleeping function called from invalid context for RTC quirk bus: ti-sysc: Fix wakeirq sleeping function called from invalid context ARM: dts: meson: Align L2 cache-controller nodename with dtschema arm64: dts: meson-gxl-s805x: reduce initial Mali450 core frequency arm64: dts: meson: add missing gxl rng clock soc: amlogic: meson-gx-socinfo: Fix S905X3 and S905D3 ID's
2020-07-17Merge tag 'tegra-for-5.9-arm-dt' of ↵Arnd Bergmann53-2195/+7251
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt ARM: tegra: Device tree changes for v5.9-rc1 This adds device trees for the ASUS Google Nexus 7 and Acer Iconia Tab A500. In addition there are a slew of fixes to existing device trees in preparation for validating the DTBs against json-schema. * tag 'tegra-for-5.9-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (38 commits) ARM: tegra: Add device-tree for ASUS Google Nexus 7 ARM: tegra: Add device-tree for Acer Iconia Tab A500 ARM: tegra: Add HDMI supplies on Nyan boards ARM: tegra: Add missing DSI controller on Tegra30 ARM: tegra: Add i2c-bus subnode for DPAUX controllers ARM: tegra: The Tegra30 SDHCI is not backwards-compatible ARM: tegra: The Tegra30 DC is not backwards-compatible ARM: tegra: Remove spurious comma from node name ARM: tegra: Add parent clock to DSI output ARM: tegra: Use standard names for SRAM nodes ARM: tegra: seaboard: Use standard battery bindings ARM: tegra: Use standard names for LED nodes ARM: tegra: Use numeric unit-addresses ARM: tegra: medcom-wide: Remove extra panel power supply ARM: tegra: Use proper unit-addresses for OPPs ARM: tegra: Add missing clock-names for SDHCI controllers ARM: tegra: Fix order of XUSB controller clocks ARM: tegra: Add #reset-cells to Tegra124 memory controller ARM: tegra: Add missing panel power supplies ARM: tegra: Add micro-USB A/B port on Jetson TK1 ... Link: https://lore.kernel.org/r/20200717161300.1661002-5-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-17Merge tag 'amlogic-dt' of ↵Arnd Bergmann6-0/+160
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt ARM: dts: amlogic updates for v5.9 - power-domain and MMC updates * tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM: dts: meson8b: odroidc1: enable the SDHC controller ARM: dts: meson8b: ec100: enable the SDHC controller ARM: dts: meson: add the SDHC MMC controller ARM: dts: meson8b: add power domain controller ARM: dts: meson8m2: add resets for the power domain controller ARM: dts: meson8: add power domain controller Link: https://lore.kernel.org/r/7hd04uf2o8.fsf@baylibre.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-17Merge tag 'socfpga_fixes_for_v5.8_v2' of ↵Arnd Bergmann2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/fixes arm/arm64: dts: socfpga: fixes for v5.8 - Add status = "okay" in QSPI - Increase QSPI size in reg property - Fix dtschema for SoCFPGA platforms * tag 'socfpga_fixes_for_v5.8_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: arm64: dts: spcfpga: Align GIC, NAND and UART nodenames with dtschema ARM: dts: socfpga: Align L2 cache-controller nodename with dtschema arm64: dts: stratix10: increase QSPI reg address in nand dts file arm64: dts: stratix10: add status to qspi dts node arm64: dts: agilex: add status to qspi dts node Link: https://lore.kernel.org/r/20200717155758.18233-1-dinguyen@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-17Merge tag 'renesas-arm-dt-for-v5.9-tag2' of ↵Arnd Bergmann23-58/+53
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt Renesas ARM DT updates for v5.9 (take two) - SPI Multi I/O Bus Controller (RPC-IF) support for R-Car V3H and V3M, including QSPI support for the Condor, Eagle, V3HSK, and V3MSK boards, - Initial support for the RZ/G2H SoC on the HopeRun HiHope RZ/G2H board, - Initial support for the Beacon EmbeddedWorks RZ/G2M board, - Minor fixes and improvements. * tag 'renesas-arm-dt-for-v5.9-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (34 commits) ARM: dts: sh73a0: Add missing clocks to sound node arm64: dts: renesas: r8a774e1: Add CAN[FD] support arm64: dts: renesas: r8a774e1: Add RWDT node arm64: dts: renesas: r8a774e1: Add MSIOF nodes arm64: dts: renesas: r8a774e1: Add I2C and IIC-DVFS support arm64: dts: renesas: r8a774e1: Add SDHI nodes arm64: dts: renesas: r8a774e1: Add SCIF and HSCIF nodes arm64: dts: renesas: r8a774e1: Add TMU device nodes arm64: dts: renesas: r8a774e1: Add CMT device nodes arm64: dts: renesas: r8a774e1: Add RZ/G2H thermal support arm64: dts: renesas: r8a774e1: Add operating points arm64: dts: renesas: Introduce r8a774a1-beacon-rzg2m-kit arm64: dts: renesas: r8a774e1: Add Ethernet AVB node arm64: dts: renesas: r8a774e1: Add GPIO device nodes arm64: dts: renesas: r8a774e1: Add SYS-DMAC device nodes arm64: dts: renesas: r8a774e1: Add IPMMU device nodes ARM: dts: gose: Fix ports node name for adv7612 ARM: dts: renesas: Fix SD Card/eMMC interface device node names arm64: dts: renesas: Fix SD Card/eMMC interface device node names arm64: dts: renesas: add full-pwr-cycle-in-suspend into eMMC nodes ... Link: https://lore.kernel.org/r/20200717112427.26032-2-geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-17ARM: dts: sh73a0: Add missing clocks to sound nodeGeert Uytterhoeven1-0/+1
The device node for the FIFO-buffered Serial Interface sound node lacks the "clocks" property, as the DTS file didn't describe any clocks yet at its introduction. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20200519075525.24742-1-geert+renesas@glider.be
2020-07-17ARM: dts: gose: Fix ports node name for adv7612Niklas Söderlund1-1/+1
When adding the adv7612 device node the ports node was misspelled as port, fix this. Fixes: bc63cd87f3ce924f ("ARM: dts: gose: add HDMI input") Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20200713111016.523189-1-niklas.soderlund+renesas@ragnatech.se Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-07-17ARM: dts: renesas: Fix SD Card/eMMC interface device node namesYoshihiro Shimoda17-50/+50
Fix the device node names as "mmc@". Fixes: 66474697923c ("ARM: dts: r7s72100: add sdhi to device tree") Fixes: a49f76cddaee ("ARM: dts: r7s9210: Add SDHI support") Fixes: 43304a5f5106 ("ARM: shmobile: r8a73a4: tidyup DT node naming") Fixes: 7d907894bfe3 ("ARM: shmobile: r8a7740: tidyup DT node naming") Fixes: 3ab2ea5fd1ce ("ARM: dts: r8a7742: Add SDHI nodes") Fixes: 63ce8a617b51 ("ARM: dts: r8a7743: Add SDHI controllers") Fixes: b591e323b271 ("ARM: dts: r8a7744: Add SDHI nodes") Fixes: d83010f87ab3 ("ARM: dts: r8a7744: Initial SoC device tree") Fixes: 7079131ef9b9 ("ARM: dts: r8a7745: Add SDHI controllers") Fixes: 0485da788028 ("ARM: dts: r8a77470: Add SDHI1 support") Fixes: 15aa5a95e820 ("ARM: dts: r8a77470: Add SDHI0 support") Fixes: f068cc816015 ("ARM: dts: r8a77470: Add SDHI2 support") Fixes: 14e1d9147d96 ("ARM: shmobile: r8a7778: tidyup DT node naming") Fixes: 2624705ceb7b ("ARM: shmobile: r8a7779: tidyup DT node naming") Fixes: b718aa448378 ("ARM: shmobile: r8a7790: tidyup DT node naming") Fixes: b7ed8a0dd4f1 ("ARM: shmobile: Add SDHI devices to r8a7791 DTSI") Fixes: ce01b14ecf19 ("ARM: dts: r8a7792: add SDHI support") Fixes: fc9ee228f500 ("ARM: dts: r8a7793: Add SDHI controllers") Fixes: b8e8ea127d00 ("ARM: shmobile: r8a7794: add SDHI DT support") Fixes: 33f6be3bf6b7 ("ARM: shmobile: sh73a0: tidyup DT node naming") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/1594382936-14114-1-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-07-17ARM: dts: hisilicon: Align L2 cache-controller nodename with dtschemaKrzysztof Kozlowski2-2/+2
Fix dtschema validator warnings like: l2-cache: $nodename:0: 'l2-cache' does not match '^(cache-controller|cpu)(@[0-9a-f,]+)*$' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2020-07-16Merge tag 'omap-for-v5.9/dt-pt2-signed' of ↵Arnd Bergmann113-162/+423
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt More dts changes for omaps for v5.9 A series of changes to configure IPU and DSP remoteproc for omap4 & 5. And a change to configure the default mux for am335x-pocketbeagle, and a change to use https for external links. * tag 'omap-for-v5.9/dt-pt2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: Replace HTTP links with HTTPS ones: OMAP DEVICE TREE SUPPORT ARM: dts: omap5-uevm: Add watchdog timers for IPU and DSP ARM: dts: omap4-panda-common: Add watchdog timers for IPU and DSP ARM: dts: omap5-uevm: Add system timers to DSP and IPU ARM: dts: omap5-uevm: Add CMA pools and enable IPU & DSP ARM: dts: omap5: Add aliases for rproc nodes ARM: dts: omap5: Add DSP and IPU nodes ARM: dts: omap4-panda-common:: Add system timers to DSP and IPU ARM: dts: omap4-panda-common: Add CMA pools and enable IPU & DSP ARM: dts: omap4: Add aliases for rproc nodes ARM: dts: omap4: Add IPU DT node ARM: dts: omap4: Update the DSP node ARM: dts: omap5: Add timer_sys_ck clocks for timers ARM: dts: omap4: Add timer_sys_ck clocks for timers ARM: dts: am335x-pocketbeagle: set default mux for gpio pins Link: https://lore.kernel.org/r/pull-1594838111-649880@atomide.com-3 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-16Merge tag 'omap-for-v5.9/ti-sysc-drop-pdata-take2-signed' of ↵Arnd Bergmann9-39/+103
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt Drop more legacy platform data for omaps for v5.9 A series of changes to drop remaining USB platform data for omap4/5, and am4, and dra7. And a patch to drop AES platform data for omap3. * tag 'omap-for-v5.9/ti-sysc-drop-pdata-take2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Drop legacy platform data for omap5 usb host ARM: OMAP2+: Drop legacy platform data for omap4 usb ARM: OMAP2+: Drop legacy platform data for dra7 dwc3 ARM: OMAP2+: Drop legacy platform data for omap5 dwc3 ARM: OMAP2+: Drop legacy platform data for am4 dwc3 bus: ti-sysc: Add missing quirk flags for usb_host_hs ARM: dts: omap3: Migrate AES from hwmods to sysc-omap2 Link: https://lore.kernel.org/r/pull-1594838111-649880@atomide.com-2 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-16Merge tag 'omap-for-v5.8/fixes-rc5-signed' of ↵Arnd Bergmann1-4/+10
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fixes for omaps for v5.8-rc cycle Few fixes for issues noticed during testing: - Two DEBUG_ATOMIC_SLEEP fixes for ti-sysc interconnect target module driver - A regression fix for ti-sysc no-idle handling that caused issues compared to earlier platform data based booting - A fix for memory leak for omap_hwmod_allocate_module - Fix d_can driver probe for am437x * tag 'omap-for-v5.8/fixes-rc5-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: Fix dcan driver probe failed on am437x platform ARM: OMAP2+: Fix possible memory leak in omap_hwmod_allocate_module bus: ti-sysc: Do not disable on suspend for no-idle bus: ti-sysc: Fix sleeping function called from invalid context for RTC quirk bus: ti-sysc: Fix wakeirq sleeping function called from invalid context Link: https://lore.kernel.org/r/pull-1594840100-132735@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-16Merge tag 'imx-fixes-5.8-2' of ↵Arnd Bergmann1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.8, round 2: - A couple of fixes on i.MX platform device registration code to stop the use of invalid IRQ 0. - Fix a regression seen on ls1021a platform, caused by commit 52102a3ba6a61 ("soc: imx: move cpu code to drivers/soc/imx"). - Fix a misconfiguration of audio SSI on imx6qdl-gw551x board. * tag 'imx-fixes-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: imx: check ls1021a ARM: imx: Remove imx_add_imx_dma() unused irq_err argument ARM: imx: Provide correct number of resources when registering gpio devices ARM: dts: imx6qdl-gw551x: fix audio SSI Link: https://lore.kernel.org/r/20200714145649.GP15718@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-16Merge tag 'amlogic-fixes' of ↵Arnd Bergmann1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/fixes Amlogic fixes for v5.8-rc - misc DT fixes, and SoC ID fixes * tag 'amlogic-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM: dts: meson: Align L2 cache-controller nodename with dtschema arm64: dts: meson-gxl-s805x: reduce initial Mali450 core frequency arm64: dts: meson: add missing gxl rng clock soc: amlogic: meson-gx-socinfo: Fix S905X3 and S905D3 ID's Link: https://lore.kernel.org/r/7hk0zc1ujc.fsf@baylibre.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-16ARM: tegra: Add device-tree for ASUS Google Nexus 7Dmitry Osipenko11-0/+3870
There are few hardware variants of NVIDIA Tegra30-based Nexus 7 device: 1. WiFi-only (named Grouper) 2. GSM (named Tilapia) 3. Using Maxim PMIC (E1565 board ID) 4. Using Ti PMIC (PM269 board ID) This patch adds device-trees for known and tested variants. Link: https://wiki.postmarketos.org/wiki/Google_Nexus_7_2012_(asus-grouper) Tested-by: Pedro Ângelo <pangelo@void.io> Tested-by: Matt Merhar <mattmerhar@protonmail.com> Tested-by: Zack Pearsall <zpearsall@yahoo.com> Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-07-16ARM: tegra: Add device-tree for Acer Iconia Tab A500Dmitry Osipenko2-0/+1439
Add device-tree for Acer Iconia Tab A500, which is NVIDIA Tegra20-based tablet device. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-07-16ARM: dts: renesas: Remove unused remote property from adv7180 nodesNiklas Söderlund6-6/+0
The remote property is never read by the driver, remove it. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20200704155856.3037010-3-niklas.soderlund+renesas@ragnatech.se Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-07-16ARM: dts: gose: Fix ports node name for adv7180Niklas Söderlund1-1/+1
When adding the adv7180 device node the ports node was misspelled as port, fix this. Fixes: 8cae359049a88b75 ("ARM: dts: gose: add composite video input") Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20200704155856.3037010-2-niklas.soderlund+renesas@ragnatech.se Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-07-15ARM: dts: socfpga: Align L2 cache-controller nodename with dtschemaKrzysztof Kozlowski2-2/+2
Fix dtschema validator warnings like: l2-cache@fffff000: $nodename:0: 'l2-cache@fffff000' does not match '^(cache-controller|cpu)(@[0-9a-f,]+)*$' Fixes: 475dc86d08de ("arm: dts: socfpga: Add a base DTSI for Altera's Arria10 SOC") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2020-07-15ARM: tegra: Add HDMI supplies on Nyan boardsThierry Reding1-0/+3
The SOR controller needs the AVDD I/O and VDD HDMI PLL supplies in order to operate correctly. Make sure to specify them for Nyan boards. Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-07-15ARM: tegra: Add missing DSI controller on Tegra30Thierry Reding1-0/+11
Tegra30 has a DSI controller, although it is never used on any of the devices supported by the upstream Linux kernel. Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-07-15ARM: tegra: Add i2c-bus subnode for DPAUX controllersThierry Reding1-0/+5
The DPAUX controller device tree bindings require the bus to have an i2c-bus subnode to distinguish between I2C clients and pinmux groups. Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-07-14ARM: OMAP2+: Drop legacy platform data for omap5 usb hostTony Lindgren1-2/+0
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-07-14ARM: OMAP2+: Drop legacy platform data for omap4 usbTony Lindgren1-2/+0
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-07-14ARM: OMAP2+: Drop legacy platform data for dra7 dwc3Tony Lindgren2-23/+39
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-07-14ARM: OMAP2+: Drop legacy platform data for omap5 dwc3Tony Lindgren1-1/+0
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-07-14ARM: dts: Fix dcan driver probe failed on am437x platformdillon min1-4/+10
Got following d_can probe errors with kernel 5.8-rc1 on am437x [ 10.730822] CAN device driver interface Starting Wait for Network to be Configured... [ OK ] Reached target Network. [ 10.787363] c_can_platform 481cc000.can: probe failed [ 10.792484] c_can_platform: probe of 481cc000.can failed with error -2 [ 10.799457] c_can_platform 481d0000.can: probe failed [ 10.804617] c_can_platform: probe of 481d0000.can failed with error -2 actually, Tony has fixed this issue on am335x with the patch [3] Since am437x has the same clock structure with am335x [1][2], so reuse the code from Tony Lindgren's patch [3] to fix it. [1]: https://www.ti.com/lit/pdf/spruh73 Chapter-23, Figure 23-1. DCAN Integration [2]: https://www.ti.com/lit/pdf/spruhl7 Chapter-25, Figure 25-1. DCAN Integration [3]: commit 516f1117d0fb ("ARM: dts: Configure osc clock for d_can on am335x") Fixes: 1a5cd7c23cc5 ("bus: ti-sysc: Enable all clocks directly during init to read revision") Signed-off-by: dillon min <dillon.minfei@gmail.com> [tony@atomide.com: aligned commit message a bit for readability] Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-07-14Merge branch 'for-linus' of ↵Linus Torvalds1-4/+8
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "A few quirks for the Elan touchpad driver, another Thinkpad is being switched over from PS/2 to native RMI4 interface, and we gave a brand new SW_MACHINE_COVER switch definition" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elan_i2c - add more hardware ID for Lenovo laptops Input: i8042 - add Lenovo XiaoXin Air 12 to i8042 nomux list Revert "Input: elants_i2c - report resolution information for touch major" Input: elan_i2c - only increment wakeup count on touch Input: synaptics - enable InterTouch for ThinkPad X1E 1st gen ARM: dts: n900: remove mmc1 card detect gpio Input: add `SW_MACHINE_COVER`
2020-07-13ARM: dts: meson8b: odroidc1: enable the SDHC controllerMartin Blumenstingl1-0/+26
Odroid-C1 has an eMMC connector where users can optionally install an eMMC module. The eMMC modules run off a 1.8V VQMMC supply which means that HS-200 mode can be used (this is the highest mode that the SDHC controller supports). Enable the SDHC controller so eMMC modules can be accessed. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200620163654.37207-4-martin.blumenstingl@googlemail.com
2020-07-13ARM: dts: meson8b: ec100: enable the SDHC controllerMartin Blumenstingl1-0/+25
EC-100 has built-in eMMC flash which is hard-wired to 3.3V VCC (which means it's limited to high-speed MMC modes). Enable the SDHC controller to access the contents of the eMMC flash. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200620163654.37207-3-martin.blumenstingl@googlemail.com
2020-07-13ARM: dts: meson: add the SDHC MMC controllerMartin Blumenstingl4-0/+50
Meson6, Meson8, Meson8b and Meson8m2 are using a similar SDHC controller IP which typically connects to an eMMC chip (because unlike the SDIO controller the SDHC controller has an 8-bit bus interface). On Meson8, Meson8b and Meson8m2 the clock inputs are all the same. However, Meson8m2 seems to have an improved version of the SHDC controller IP which doesn't require the driver to wait manually for a flush of a DMA transfer. Thus every SoC has it's own compatible string so if more difference are discovered they can be implemented. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200620163654.37207-2-martin.blumenstingl@googlemail.com
2020-07-13ARM: dts: meson8b: add power domain controllerMartin Blumenstingl1-0/+27
The Meson8b SoCs have a power domain controller which can turn on/off various register areas (such as: Ethernet, VPU, etc.). Add the main "pwrc" controller and configure the Ethernet power domain. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20200620161010.23171-4-martin.blumenstingl@googlemail.com
2020-07-13ARM: dts: meson8m2: add resets for the power domain controllerMartin Blumenstingl1-0/+19
The Meson8m2 SoCs has introduced additional reset lines for the VPU compared to Meson8. Also it uses a slightly different VPU clock frequency compared to Meson8 since it can now achieve 364MHz thanks to the addition of the GP_PLL. Add the reset lines, VPU clock configuration and update the compatible string so the implementation differences can be managed. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20200620161010.23171-3-martin.blumenstingl@googlemail.com
2020-07-13ARM: dts: meson8: add power domain controllerMartin Blumenstingl1-0/+13
The Meson8 SoCs have a power domain controller which can turn on/off various register areas (such as: Ethernet, VPU, etc.). Add the main "pwrc" controller and configure the Ethernet power domain. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20200620161010.23171-2-martin.blumenstingl@googlemail.com
2020-07-13Replace HTTP links with HTTPS ones: OMAP DEVICE TREE SUPPORTAlexander A. Klimov109-114/+114
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-07-13ARM: dts: omap5-uevm: Add watchdog timers for IPU and DSPSuman Anna1-0/+2
The watchdog timers have been added for the IPU and DSP remoteproc devices for the OMAP5 uEVM board. The following timers (same as the timers on OMAP4 Panda boards) are used as the watchdog timers, DSP : GPT6 IPU : GPT9 & GPT11 (one for each Cortex-M4 core) The MPU-side drivers will use this data to initialize the watchdog timers, and listen for any watchdog triggers. The BIOS-side code needs to configure and refresh these timers properly to not throw a watchdog error. These timers can be changed or removed as per the system integration needs, alongside appropriate equivalent changes on the firmware side. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-07-13ARM: dts: omap4-panda-common: Add watchdog timers for IPU and DSPSuman Anna1-0/+2
The watchdog timers have been added for the IPU and DSP remoteproc devices on all the OMAP4-based Panda boards. The following timers are used as the watchdog timers, DSP : GPT6 IPU : GPT9 & GPT11 (one for each Cortex-M3 core) The MPU-side drivers will use this data to initialize the watchdog timers, and listen for any watchdog triggers. The BIOS-side code needs to configure and refresh these timers properly to not throw a watchdog error. These timers can be changed or removed as per the system integration needs, alongside appropriate equivalent changes on the firmware side. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-07-13ARM: dts: omap5-uevm: Add system timers to DSP and IPUSuman Anna1-0/+2
The BIOS System Tick timers have been added for the IPU and DSP remoteproc devices for the OMAP5 uEVM boards. The following timers (same as the timers on OMAP4 Panda boards) are chosen: IPU : GPT3 (SMP-mode) DSP : GPT5 IPU has two Cortex-M4 processors, and is currently expected to be running in SMP-mode, so only a single timer suffices to provide the BIOS tick timer. An additional timer should be added for the second processor in IPU if it were to be run in non-SMP mode. The timer value also needs to be unique from the ones used by other processors so that they can be run simultaneously. The timers are optional, but are mandatory to support device management features such as power management and watchdog support. The above are added to successfully boot and execute firmware images configured with the respective timers, images that use internal processor subsystem timers are not affected. The timers can be changed or removed as per the system integration needs, alongside equivalent changes on the firmware side. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-07-13ARM: dts: omap5-uevm: Add CMA pools and enable IPU & DSPSuman Anna1-0/+30
The CMA reserved memory nodes have been added for the IPU and DSP remoteproc devices on the OMAP5 uEVM board. These nodes are assigned to the respective rproc device nodes, and both the IPU and DSP remote processors are enabled for this board. The current CMA pools and sizes are defined statically for each device. The starting addresses are fixed to meet current dependencies on the remote processor firmwares, and will go away when the remote-side code has been improved to gather this information runtime during its initialization. An associated pair of the rproc node and its CMA node can be disabled later on if there is no use-case defined to use that remote processor. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-07-13ARM: dts: omap5: Add aliases for rproc nodesSuman Anna1-0/+2
Add aliases for the DSP and IPU remoteproc processor nodes common to all OMAP5 boards. The aliases uses the stem "rproc", and are identical to the values chosen on OMAP4 boards. The aliases can be overridden, if needed, in the respective board files. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-07-13ARM: dts: omap5: Add DSP and IPU nodesSuman Anna1-0/+23
OMAP5, like OMAP4, also has two remote processor subsystems, DSP and IPU. The IPU subsystem though has dual Cortex-M4 processors instead of the dual Cortex-M3 processors in OMAP4, but otherwise has almost the same set of features. Add the DT nodes for these two processor sub-systems for all OMAP5 SoCs. The nodes have the 'iommus', 'clocks', 'resets', 'firmware' and 'mboxes' properties added, and are disabled for now. The IPU node has its L2 RAM memory specified through the 'reg' and 'reg-names' properties. The DSP node doesn't have these since it doesn't have any L2 RAM memories, but has an additional 'ti,bootreg' property instead as it has a specific boot register that needs to be programmed for booting. These nodes should be enabled as per the individual product configuration in the corresponding board dts files. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-07-13ARM: dts: omap4-panda-common:: Add system timers to DSP and IPUSuman Anna1-0/+2
The BIOS System Tick timers have been added for the IPU and DSP remoteproc devices on all the OMAP4-based Panda boards. The following DMTimers are chosen: IPU : GPT3 (SMP-mode) DSP : GPT5 IPU has two Cortex-M3 processors, and is currently expected to be running in SMP-mode, so only a single timer suffices to provide the BIOS tick timer. An additional timer should be added for the second processor in IPU if it were to be run in non-SMP mode. The timer value also needs to be unique from the ones used by other processors so that they can be run simultaneously. The timers are optional, but are mandatory to support device management features such as power management and watchdog support. The above are added to successfully boot and execute firmware images configured with the respective timers, images that use internal processor subsystem timers are not affected. The timers can be changed or removed as per the system integration needs, alongside equivalent changes on the firmware side. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-07-13ARM: dts: omap4-panda-common: Add CMA pools and enable IPU & DSPSuman Anna1-0/+30
The CMA reserved memory nodes have been added for the IPU and DSP remoteproc devices on all the OMAP4-based Panda boards. These nodes are assigned to the respective rproc device nodes, and both the IPU and DSP remote processors are enabled for all these boards. The current CMA pools and sizes are defined statically for each device. The starting addresses are fixed to meet current dependencies on the remote processor firmwares, and will go away when the remote-side code has been improved to gather this information runtime during its initialization. An associated pair of the rproc node and its CMA node can be disabled later on if there is no use-case defined to use that remote processor. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-03 01:23:38 +0300