summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts
AgeCommit message (Collapse)AuthorFilesLines
2020-09-13Merge tag 'renesas-arm-dt-for-v5.10-tag1' of ↵Olof Johansson4-60/+492
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt Renesas ARM DT updates for v5.10 - Increase support for the RZ/G2H SoC on the HopeRun HiHope RZ/G2H board, and its display panel expansion board, - Increase support for the RZ/G1H SoC on the iWave RainboW SoM (G21M) and Qseven board (G21D), - SATA support for the HopeRun HiHope RZ/G2N board, - PCIe endpoint support for the RZ/G2M, RZ/G2E, and RZ/G2H SoCs, - Audio support for the R-Car M3-W+ SoC. - Minor fixes and improvements. * tag 'renesas-arm-dt-for-v5.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (39 commits) arm64: dts: renesas: Add HiHope RZ/G2H board with idk-1110wr display arm64: dts: renesas: r8a774e1: Add cpuidle support for CA5x cores arm64: dts: renesas: r8a774e1: Add FDP1 device nodes ARM: dts: r8a7742-iwg21d-q7: Enable PCIe Controller ARM: dts: r8a7742: Add IPMMU DT nodes arm64: dts: renesas: r8a77961: Enable Sound / Audio-DMAC arm64: dts: renesas: r8a774e1: Add PWM device nodes ARM: dts: r8a7742-iwg21m: Add SPI NOR support arm64: dts: renesas: r8a774e1-hihope-rzg2h: Enable HS400 mode ARM: dts: r8a7742-iwg21m: Add RTC support ARM: dts: r8a7742-iwg21m: Sort the nodes alphabetically ARM: dts: r8a7742: Add CAN support arm64: dts: renesas: r8a774c0: Add PCIe EP node arm64: dts: renesas: r8a774b1: Add PCIe EP nodes arm64: dts: renesas: r8a774a1: Add PCIe EP nodes ARM: dts: r8a7742: Add QSPI support arm64: dts: renesas: r8a774e1-hihope-rzg2h: Setup DU clocks arm64: dts: renesas: r8a774e1: Add LVDS device node arm64: dts: renesas: r8a774e1: Populate HDMI encoder node arm64: dts: renesas: r8a774e1: Populate DU device node ... Link: https://lore.kernel.org/r/20200904114819.30254-3-geert+renesas@glider.be Signed-off-by: Olof Johansson <olof@lixom.net>
2020-09-13Merge tag 'arm-soc/for-5.9/devicetree-fixes' of ↵Olof Johansson3-3/+3
https://github.com/Broadcom/stblinux into arm/fixes This pull request contains Broadcom ARM-based SoCs Device Tree fixes for 5.9, please pull the following: - Florian fixes the Broadcom QSPI controller binding such that the most specific compatible string is the left most one, and all existing in-tree users are updated as well. * tag 'arm-soc/for-5.9/devicetree-fixes' of https://github.com/Broadcom/stblinux: arm64: dts: ns2: Fixed QSPI compatible string ARM: dts: BCM5301X: Fixed QSPI compatible string ARM: dts: NSP: Fixed QSPI compatible string ARM: dts: bcm: HR2: Fixed QSPI compatible string dt-bindings: spi: Fix spi-bcm-qspi compatible ordering Link: https://lore.kernel.org/r/20200909211857.4144718-1-f.fainelli@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2020-09-13Merge tag 'imx-fixes-5.9-2' of ↵Olof Johansson1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.9, round 2: - Fix the misspelling of 'interrupts' property in i.MX8MQ TMU DT node. - Correct 'ahb' clock for i.MX8MP SDMA1 in device tree. - Fix pad QSPI1B_SCLK mux mode for UART3 on i.MX6SX. * tag 'imx-fixes-5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx6sx: fix the pad QSPI1B_SCLK mux mode for uart3 arm64: dts: imx8mp: correct sdma1 clk setting arm64: dts: imx8mq: Fix TMU interrupt property Link: https://lore.kernel.org/r/20200909143844.GA25109@dragon Signed-off-by: Olof Johansson <olof@lixom.net>
2020-09-13Merge tag 'omap-for-v5.9/fixes-rc3' of ↵Olof Johansson3-31/+20
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fixes for omaps for v5.9-rc cycle Few fixes for omap based devices: - Fix of_clk_get() error handling for omap-iommu - Fix missing audio pinctrl entries for logicpd boards - Fix video for logicpd-som-lv after switch to generic panels - Fix omap5 DSI clocks base * tag 'omap-for-v5.9/fixes-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: omap5: Fix DSI base address and clocks ARM: dts: logicpd-som-lv-baseboard: Fix missing video ARM: dts: logicpd-som-lv-baseboard: Fix broken audio ARM: dts: logicpd-torpedo-baseboard: Fix broken audio ARM: OMAP2+: Fix an IS_ERR() vs NULL check in _get_pwrdm() Link: https://lore.kernel.org/r/pull-1599132064-54898@atomide.com Signed-off-by: Olof Johansson <olof@lixom.net>
2020-09-13ARM: dts: imx6qdl-tqma6: fix LM75 compatible stringMatthias Schiffer2-2/+2
Specify the National LM75 sensor including its vendor name, as mandated by the binding docs. Fixes: cac849e9bbc8 ("ARM: dts: imx6qdl: add TQMa6{S,Q,QP} SoM") Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-09-13ARM: dts: imx6qdl-tqma6: remove obsolete fsl,spi-num-chipselectsMatthias Schiffer1-1/+0
This property is unneeded and not supported by the spi-imx driver. Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-09-13ARM: dts: imx6qdl-tqma6: fix indentationMatthias Schiffer1-94/+94
The PMIC configuration is indented one level too deep. Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-09-11ARM: dts: alpine: Align GIC nodename with dtschemaKrzysztof Kozlowski1-1/+1
Fix dtschema validator warnings like: gic@fb001000: $nodename:0: 'gic@fb001000' does not match '^interrupt-controller(@[0-9a-f,]+)*$' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-09-11ARM: dts: zx: Align L2 cache-controller nodename with dtschemaKrzysztof Kozlowski1-1/+1
Fix dtschema validator warnings like: l2-cache-controller@c00000: $nodename:0: 'l2-cache-controller@c00000' does not match '^(cache-controller|cpu)(@[0-9a-f,]+)*$' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Jun Nie <jun.nie@linaro.org>
2020-09-11ARM: dts: tango: Align L2 cache-controller nodename with dtschemaKrzysztof Kozlowski1-1/+1
Fix dtschema validator warnings like: l2-cache-controller@20100000: $nodename:0: 'l2-cache-controller@20100000' does not match '^(cache-controller|cpu)(@[0-9a-f,]+)*$' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Mans Rullgard <mans@mansr.com>
2020-09-11ARM: dts: spear: Align L2 cache-controller nodename with dtschemaKrzysztof Kozlowski1-1/+1
Fix dtschema validator warnings like: l2-cache: $nodename:0: 'l2-cache' does not match '^(cache-controller|cpu)(@[0-9a-f,]+)*$' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-09-11ARM: dts: qcom: Align L2 cache-controller nodename with dtschemaKrzysztof Kozlowski1-1/+1
Fix dtschema validator warnings like: l2-cache@2040000: $nodename:0: 'l2-cache@2040000' does not match '^(cache-controller|cpu)(@[0-9a-f,]+)*$' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-09-11ARM: dts: prima: Align L2 cache-controller nodename with dtschemaKrzysztof Kozlowski1-1/+1
Fix dtschema validator warnings like: l2-cache-controller@80040000: $nodename:0: 'l2-cache-controller@80040000' does not match '^(cache-controller|cpu)(@[0-9a-f,]+)*$' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Barry Song <baohua@kernel.org>
2020-09-11ARM: dts: exynos: move assigned-clock* properties to i2s0 node in Odroid XU4Krzysztof Kozlowski1-33/+27
The purpose of those assigned-clock-* properties is to configure clock for the I2S device so move them to respective node. This silences the dtschema warnings like: 'clocks' is a dependency of 'assigned-clocks' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200906142146.21266-3-krzk@kernel.org
2020-09-11ARM: dts: exynos: add input clock to CMU in Exynos4412 OdroidKrzysztof Kozlowski1-0/+1
Commit 68605101460e ("ARM: dts: exynos: Add support for audio over HDMI for Odroid X/X2/U3") added assigned clocks under Clock Management Unit. However the dtschema expects "clocks" property if "assigned-clocks" are used. Add reference to input clock to silence the dtschema warnings: arch/arm/boot/dts/exynos4412-odroidu3.dt.yaml: clock-controller@10030000: 'clocks' is a dependency of 'assigned-clocks' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200906142146.21266-2-krzk@kernel.org
2020-09-11ARM: dts: exynos: add input clock to CMU in Exynos3250Krzysztof Kozlowski3-0/+12
Commit 52005dece527 ("ARM: dts: Add assigned clock parents to CMU node for exynos3250") added assigned clocks under Clock Management Unit to fix hangs when accessing ISP registers. However the dtschema expects "clocks" property if "assigned-clocks" are used. Add reference to input clock to silence the dtschema warnings: arch/arm/boot/dts/exynos3250-artik5-eval.dt.yaml: clock-controller@10030000: 'clocks' is a dependency of 'assigned-clocks' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200906142146.21266-1-krzk@kernel.org
2020-09-11ARM: dts: s3c24xx: move fixed clocks under root node in SMDK2416Krzysztof Kozlowski1-12/+5
The fixed clocks are kept under dedicated 'clocks' node but this causes multiple dtschema warnings: clocks: $nodename:0: 'clocks' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' clocks: #size-cells:0:0: 0 is not one of [1, 2] clocks: xti@0:reg:0: [0] is too short clocks: 'ranges' is a required property xti@0: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200907183313.29234-12-krzk@kernel.org
2020-09-11ARM: dts: s3c24xx: add address to CPU nodeKrzysztof Kozlowski1-1/+6
The CPU nodes should be described as children of "cpus" bus node with appropriate "reg" properties: cpus: '#address-cells' is a required property cpus: '#size-cells' is a required property cpu: 'device_type' is a required property cpu: 'reg' is a required property Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200907183313.29234-11-krzk@kernel.org
2020-09-11ARM: dts: s3c24xx: align PWM/timer node name with dtschemaKrzysztof Kozlowski1-1/+1
Although PWM is used on S3C24xx as clocksource/timer, the dtschema expects the node to be named in certain format: timer@51000000: $nodename:0: 'timer@51000000' does not match '^pwm(@.*|-[0-9a-f])*$' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200907183313.29234-10-krzk@kernel.org
2020-09-11ARM: dts: s3c24xx: override nodes by labelKrzysztof Kozlowski2-63/+63
Using full paths to extend or override a device tree node is error prone. If there was a typo error, a new node will be created instead of extending the existing node. This will lead to run-time errors that could be hard to detect. A mistyped label on the other hand, will cause a dtc compile error (during build time). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200907183313.29234-9-krzk@kernel.org
2020-09-11ARM: dts: s3c24xx: fix number of PWM cellsKrzysztof Kozlowski1-1/+1
The PWM has only three cells, not four, as pointed out by dtschema: timer@51000000: #pwm-cells:0:0: 3 was expected Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200907183313.29234-8-krzk@kernel.org
2020-09-11ARM: dts: s3c6410: remove additional CPU compatibleKrzysztof Kozlowski1-1/+1
Only the specific compatible (arm,arm1176jzf-s) is allowed by dtschema: cpu@0: compatible: ['arm,arm1176jzf-s', 'arm,arm1176'] is too long cpu@0: compatible: Additional items are not allowed ('arm,arm1176' was unexpected) Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200907183313.29234-7-krzk@kernel.org
2020-09-11ARM: dts: s3c6410: align node SROM bus node name with dtschema in SMDK6410Krzysztof Kozlowski1-1/+1
The SROM controller is modeled with a bus so align the device node name with dtschema to fix warning: srom-cs1@18000000: $nodename:0: 'srom-cs1@18000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200907183313.29234-6-krzk@kernel.org
2020-09-11ARM: dts: s3c6410: align node SROM bus node name with dtschema in Mini6410Krzysztof Kozlowski1-1/+1
The SROM controller is modeled with a bus so align the device node name with dtschema to fix warning: srom-cs1@18000000: $nodename:0: 'srom-cs1@18000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200907183313.29234-5-krzk@kernel.org
2020-09-11ARM: dts: s3c6410: move fixed clocks under root node in SMDK6410Krzysztof Kozlowski1-19/+11
The fixed clocks are kept under dedicated 'clocks' node but this causes multiple dtschema warnings: clocks: $nodename:0: 'clocks' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' clocks: #size-cells:0:0: 0 is not one of [1, 2] clocks: oscillator@0:reg:0: [0] is too short clocks: oscillator@1:reg:0: [1] is too short clocks: 'ranges' is a required property oscillator@0: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200907183313.29234-4-krzk@kernel.org
2020-09-11ARM: dts: s3c6410: move fixed clocks under root node in Mini6410Krzysztof Kozlowski1-19/+11
The fixed clocks are kept under dedicated 'clocks' node but this causes multiple dtschema warnings: clocks: $nodename:0: 'clocks' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' clocks: #size-cells:0:0: 0 is not one of [1, 2] clocks: oscillator@0:reg:0: [0] is too short clocks: oscillator@1:reg:0: [1] is too short clocks: 'ranges' is a required property oscillator@0: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200907183313.29234-3-krzk@kernel.org
2020-09-11ARM: dts: s5pv210: correct ethernet unit address in SMDKV210Krzysztof Kozlowski1-1/+1
The SROM bank 5 is at address 0xa8000000, just like the one put in "reg" property of ethernet node. Fix the unit address of ethernet node. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200907183313.29234-2-krzk@kernel.org
2020-09-11ARM: dts: renesas: Fix pin controller node namesGeert Uytterhoeven19-19/+19
According to Devicetree Specification v0.2 and later, Section "Generic Names Recommendation", the node name for a pin controller device node should be "pinctrl". Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20200821112351.5518-1-geert+renesas@glider.be
2020-09-11ARM: dts: aspeed: Add Mowgli BMC platformBen Pai2-0/+663
The Mowgli BMC is an ASPEED ast2500 based BMC that is part of an OpenPower Power9 server. Signed-off-by: Ben Pai <Ben_Pai@wistron.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20200909090818.24021-1-ben_pai@wistron.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-09-10Merge tag 'tags/bcm2835-dt-next-2020-09-08' into devicetree/nextFlorian Fainelli2-1/+169
Maxime Ripard enables vc4 on BCM2711 (RPi4), which among other things adds HDMI functionality (no 4K yet). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-09-10ARM: dts: broadcom: Fix SP804 nodeAndre Przywara1-2/+2
The DT binding for SP804 requires to have an "arm,primecell" compatible string. Add this string so that the Linux primecell bus driver picks the device up and activates the clock. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> [florian: added compatible to ccbtimer1] Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-09-10ARM: dts: NSP: Fix SP805 clock-namesAndre Przywara1-1/+1
The SP805 binding sets the name for the actual watchdog clock to "wdog_clk" (with an underscore). Change the name in the DTs for the Broadcom NSP platform to match that. The Linux and U-Boot driver use the *first* clock for this purpose anyway, so it does not break anything. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Ray Jui <ray.jui@broadcom.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-09-10ARM: dts: Cygnus: Fix SP805 clocksAndre Przywara1-2/+2
The SP805 DT binding requires two clocks to be specified, but the Broadcom Cygnus DT currently only specifies one clock. In practice, Linux would pick a clock named "apb_pclk" for the bus clock, and the Linux and U-Boot SP805 driver would use the first clock to derive the actual watchdog counter frequency. Since currently both are the very same clock, we can just double the clock reference, and add the correct clock-names, to match the binding. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Ray Jui <ray.jui@broadcom.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-09-10ARM: dts: NSP: replace status value "ok" by "okay"Adrian Schmutzler2-2/+2
While the DT parser recognizes "ok" as a valid value for the "status" property, it is actually mentioned nowhere. Use the proper value "okay" instead, as done in the majority of files already. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-09-10ARM: BCM5301X: Add DT for Meraki MR32Christian Lamparter2-0/+198
add support for the Cisco Meraki MR32. This is a dual-band enterprise class 802.11ac access point. The unit was donated by Chris Blake. Thank you! SoC: Broadcom BCM53016A1 (1 GHz, 2 cores) RAM: 128 MiB NAND: 128 MiB Spansion S34ML01G2 (~114 MiB useable) ETH: 1GBit Ethernet Port - PoE WIFI1: Broadcom BCM43520 an+ac (2x2:2 - id: 0x4352) WIFI2: Broadcom BCM43520 bgn (2x2:2 - id: 0x4352) WIFI3: Broadcom BCM43428 abgn (1x1:1 - id: 43428) BLE: Broadcom BCM20732 (ttyS1) LEDS: 1 x Programmable RGB Status LED (driven by a PWM) 1 x White LED (GPIO) 1 x Orange LED Fault Indicator (GPIO) 2 x LAN Activity / Speed LEDs (On the RJ45 Port) BUTTON: one Reset button MISC: AT24C64 8KiB EEPROM (i2c - stores Ethernet MAC) ina219 hardware monitor (i2c) Kensington Lock SERIAL: WARNING: The serial port needs a TTL/RS-232 3V3 level converter! The Serial setting is 115200-8-N-1. The board has a populated right angle 1x4 0.1" pinheader. The pinout is: VCC, RX, TX, GND. Odd stuff: - uart0 clock frequency is 62.5 MHz. - The LEDs are labeled as SYS-LED1 through SYS-LED3 because of the silkscreen on the PCB. - the original u-boot has been compiled with most functions and commands disabled. The u-boot env isn't setup properly either and as a result, the bcm47xxpart probing is not working. Hence, the nand partitions are specified through a "fixed-partition" binding. - The "WICED SMART(TM)" Bluetooth LE 4.0 BCM20732 chip is connected to uart2 of the SoC. The BCM20732 does not provide a HCI. So the linux' bluetooth stack is useless. The mock-up node with the compatible binding and enable-gpios property is provided solely as documentation. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-09-10net: dsa: microchip: look for phy-mode in port nodesHelmut Grohne1-1/+1
Documentation/devicetree/bindings/net/dsa/dsa.txt says that the phy-mode property should be specified on port nodes. However, the microchip drivers read it from the switch node. Let the driver use the per-port property and fall back to the old location with a warning. Fix in-tree users. Signed-off-by: Helmut Grohne <helmut.grohne@intenta.de> Link: https://lore.kernel.org/netdev/20200617082235.GA1523@laureti-dev/ Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-10ARM: dts: r8a7742-iwg21d-q7: Enable SD2 LED indicationLad Prabhakar1-0/+10
Add support for LED trigger on SD2 interface. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com> Link: https://lore.kernel.org/r/20200907155541.2011-4-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-09-10ARM: dts: r8a7742-iwg21d-q7: Add can1 support to carrier boardLad Prabhakar1-0/+21
This patch enables CAN1 interface exposed through connector J20 on the carrier board. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com> Link: https://lore.kernel.org/r/20200907155541.2011-3-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-09-10ARM: dts: r8a7742-iwg21d-q7: Add SPI NOR supportLad Prabhakar1-0/+31
Add support for the SPI NOR device which is connected to MSIOF0 interface on the iWave RainboW-G21d-q7 board. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com> Link: https://lore.kernel.org/r/20200907155541.2011-2-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-09-10ARM: dts: r8a7742: Add VIN DT nodesLad Prabhakar1-0/+44
Add VIN[0123] instances found in the r8a7742 SoC. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20200907144509.8861-3-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-09-10ARM: dts: dra7: drop legacy cpsw dt nodeGrygorii Strashko2-56/+2
All dra7/am57 boards converted to use new driver, so drop legacy cpsw dt node. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-09-10ARM: dts: am57xx-cl-som-am57x: switch to new cpsw switch drvGrygorii Strashko1-7/+6
Switch CompuLab CL-SOM-AM57x board to use new cpsw switch driver. Those board configured in dual_mac mode by default. Hence, dual_mac mode has been preserved the same way between legacy and new driver it's safe to switch drivers. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-09-10ARM: dts: dra7x-evm: switch to new cpsw switch drvGrygorii Strashko6-37/+35
Switch all TI DRA7x boards to use new cpsw switch driver. Those boards configured in dual_mac mode by default. Hence, dual_mac mode has been preserved the same way between legacy and new driver it's safe to switch drivers. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-09-10ARM: dts: beagle-x15: switch to new cpsw switch drvGrygorii Strashko1-7/+6
Switch all TI AM5728 BeagleBoard-X15 boards to use new cpsw switch driver. Those boards have 2 Ext. port wired and configured in dual_mac mode by default. Hence, dual_mac mode has been preserved the same way between legacy and new driver it's safe to switch drivers. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-09-10ARM: dts: am57xx-idk: switch to new cpsw switch drvGrygorii Strashko4-42/+9
Switch all am571/2/4-idk boards to use new cpsw switch driver. Those boards have 2 Ext. port wired and configured in dual_mac mode by default. Hence, dual_mac mode has been preserved the same way between legacy and new driver it's safe to switch drivers. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-09-10ARM: dts: am5729: beagleboneai: switch to new cpsw switch drvGrygorii Strashko1-5/+9
Switch BeagleBone AI to use new cpsw switch driver. It has one Ext. port only and fits dual_mac mode with no issues. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-09-10ARM: dts: am43xx: replace status value "ok" by "okay"Adrian Schmutzler3-3/+3
While the DT parser recognizes "ok" as a valid value for the "status" property, it is actually mentioned nowhere. Use the proper value "okay" instead, as done in the majority of files already. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-09-10ARM: dts: dra7xx: replace status value "ok" by "okay"Adrian Schmutzler5-11/+11
While the DT parser recognizes "ok" as a valid value for the "status" property, it is actually mentioned nowhere. Use the proper value "okay" instead, as done in the majority of files already. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-09-10ARM: dts: omap: replace status value "ok" by "okay"Adrian Schmutzler29-51/+51
While the DT parser recognizes "ok" as a valid value for the "status" property, it is actually mentioned nowhere. Use the proper value "okay" instead, as done in the majority of files already. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-09-10ARM: dts: n9, n950: Remove nokia,nvm-size propertySakari Ailus2-2/+0
Remove nokia,nvm-size property as it is no longer needed. The driver can nowadays figure out the size so do not specify it in DT. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-27 21:26:06 +0300