summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts
AgeCommit message (Collapse)AuthorFilesLines
2021-12-22ARM: dts: imx6ull-pinfunc: Fix CSI_DATA07__ESAI_TX0 pad nameFabio Estevam1-1/+1
commit 737e65c7956795b3553781fb7bc82fce1c39503f upstream. According to the i.MX6ULL Reference Manual, pad CSI_DATA07 may have the ESAI_TX0 functionality, not ESAI_T0. Also, NXP's i.MX Config Tools 10.0 generates dtsi with the MX6ULL_PAD_CSI_DATA07__ESAI_TX0 naming, so fix it accordingly. There are no devicetree users in mainline that use the old name, so just remove the old entry. Fixes: c201369d4aa5 ("ARM: dts: imx6ull: add imx6ull support") Reported-by: George Makarov <georgemakarov1@gmail.com> Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-22ARM: socfpga: dts: fix qspi node compatibleDinh Nguyen7-8/+8
[ Upstream commit cb25b11943cbcc5a34531129952870420f8be858 ] The QSPI flash node needs to have the required "jedec,spi-nor" in the compatible string. Fixes: 1df99da8953 ("ARM: dts: socfpga: Enable QSPI in Arria10 devkit") Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01ARM: dts: bcm2711: Fix PCIe interruptsFlorian Fainelli1-1/+7
[ Upstream commit 98481f3d72fb88cb5b973153434061015f094925 ] The PCIe host bridge has two interrupt lines, one that goes towards it PCIE_INTR2 second level interrupt controller and one for its MSI second level interrupt controller. The first interrupt line is not currently managed by the driver, which is why it was not a functional problem. The interrupt-map property was also only listing the PCI_INTA interrupts when there are also the INTB, C and D. Reported-by: Jim Quinlan <jim2101024@gmail.com> Fixes: d5c8dc0d4c88 ("ARM: dts: bcm2711: Enable PCIe controller") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01ARM: dts: BCM5301X: Add interrupt properties to GPIO nodeFlorian Fainelli1-0/+2
[ Upstream commit 40f7342f0587639e5ad625adaa15efdd3cffb18f ] The GPIO controller is also an interrupt controller provider and is currently missing the appropriate 'interrupt-controller' and '#interrupt-cells' properties to denote that. Fixes: fb026d3de33b ("ARM: BCM5301X: Add Broadcom's bus-axi to the DTS file") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01ARM: dts: BCM5301X: Fix I2C controller interruptFlorian Fainelli1-1/+1
[ Upstream commit 754c4050a00e802e122690112fc2c3a6abafa7e2 ] The I2C interrupt controller line is off by 32 because the datasheet describes interrupt inputs into the GIC which are for Shared Peripheral Interrupts and are starting at offset 32. The ARM GIC binding expects the SPI interrupts to be numbered from 0 relative to the SPI base. Fixes: bb097e3e0045 ("ARM: dts: BCM5301X: Add I2C support to the DT") Tested-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-25ARM: dts: qcom: fix memory and mdio nodes naming for RB3011David Heidelberg1-3/+3
[ Upstream commit 14a1f6c9d8017ffbf388e82e1a1f023196d98612 ] Fixes warnings regarding to memory and mdio nodes and apply new naming following dt-schema. Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211020214741.261509-1-david@ixit.cz Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-25ARM: dts: ls1021a-tsn: use generic "jedec,spi-nor" compatible for flashLi Yang1-1/+1
[ Upstream commit 05e63b48b20fa70726be505a7660d1a07bc1cffb ] We cannot list all the possible chips used in different board revisions, just use the generic "jedec,spi-nor" compatible instead. This also fixes dtbs_check error: ['jedec,spi-nor', 's25fl256s1', 's25fl512s'] is too long Signed-off-by: Li Yang <leoyang.li@nxp.com> Reviewed-by: Kuldeep Singh <kuldeep.singh@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-25ARM: dts: ls1021a: move thermal-zones node out of soc/Li Yang1-33/+33
[ Upstream commit 1ee1500ef717eefb5d9bdaf97905cb81b4e69aa4 ] This fixes dtbs-check error from simple-bus schema: soc: thermal-zones: {'type': 'object'} is not allowed for {'cpu-thermal': ..... } From schema: /home/leo/.local/lib/python3.8/site-packages/dtschema/schemas/simple-bus.yaml Signed-off-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-25ARM: dts: omap: fix gpmc,mux-add-data typeRoger Quadros2-2/+2
[ Upstream commit 51b9e22ffd3c4c56cbb7caae9750f70e55ffa603 ] gpmc,mux-add-data is not boolean. Fixes the below errors flagged by dtbs_check. "ethernet@4,0:gpmc,mux-add-data: True is not of type 'array'" Signed-off-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-25ARM: BCM53016: Specify switch ports for Meraki MR32Christian Lamparter1-0/+22
[ Upstream commit 6abc4ca5a28070945e0d68cb4160b309bfbf4b8b ] the switch identifies itself as a BCM53012 (rev 5)... This patch has been tested & verified on OpenWrt's snapshot with Linux 5.10 (didn't test any older kernels). The MR32 is able to "talk to the network" as before with OpenWrt's SWITCHDEV b53 driver. | b53-srab-switch 18007000.ethernet-switch: found switch: BCM53012, rev 5 | libphy: dsa slave smi: probed | b53-srab-switch 18007000.ethernet-switch poe (uninitialized): | PHY [dsa-0.0:00] driver [Generic PHY] (irq=POLL) | b53-srab-switch 18007000.ethernet-switch: Using legacy PHYLIB callbacks. | Please migrate to PHYLINK! | DSA: tree 0 setup Reported-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-25ARM: dts: ux500: Skomer regulator fixesLinus Walleij1-4/+4
[ Upstream commit 7aee0288beab72cdfa35af51f62e94373fca595d ] AUX2 has slightly wrong voltage and AUX5 doesn't need to be always on. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-25ARM: dts: NSP: Fix mpcore, mmc node namesMatthew Hagan1-2/+2
[ Upstream commit 15a563d008ef9d04df525f0c476cd7d7127bb883 ] Running dtbs_check yielded the issues with bcm-nsp.dtsi. Firstly this patch fixes the following message by appending "-bus" to the mpcore node name: mpcore@19000000: $nodename:0: 'mpcore@19000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' Secondly mmc node name. The label name can remain as is. sdhci@21000: $nodename:0: 'sdhci@21000' does not match '^mmc(@.*)?$' Signed-off-by: Matthew Hagan <mnhagan88@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-25ARM: dts: BCM5301X: Fix MDIO mux bindingRafał Miłecki1-1/+1
[ Upstream commit 6ee0b56f7530e0ebb496fe15d0b54c5f3a1b5e17 ] This fixes following error for all BCM5301X dts files: mdio-bus-mux@18003000: compatible: ['mdio-mux-mmioreg'] is too short Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-25ARM: dts: BCM5301X: Fix nodes namesRafał Miłecki2-5/+5
[ Upstream commit 9dba049b6d32e95c0dd2a0d607f593ea288ac140 ] This fixes following errors for all BCM5301X dts files: chipcommonA@18000000: $nodename:0: 'chipcommonA@18000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' mpcore@19000000: $nodename:0: 'mpcore@19000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' mdio-bus-mux@18003000: $nodename:0: 'mdio-bus-mux@18003000' does not match '^mdio-mux[\\-@]?' dmu@1800c000: $nodename:0: 'dmu@1800c000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-25ARM: dts: sunxi: Fix OPPs node nameMaxime Ripard3-6/+6
[ Upstream commit ffbe853a3f5a37fa0a511265b21abf097ffdbe45 ] The operating-points-v2 nodes are named inconsistently, but mostly either opp_table0 or gpu-opp-table. However, the underscore is an invalid character for a node name and the thermal zone binding explicitly requires that zones are called opp-table-*. Let's fix it. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20210901091852.479202-43-maxime@cerno.tech Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18ARM: dts: stm32: fix AV96 board SAI2 pin muxing on stm32mp15Olivier Moysan1-4/+4
[ Upstream commit 1a9a9d226f0f0ef5d9bf588ab432e0d679bb1954 ] Fix SAI2A and SAI2B pin muxings for AV96 board on STM32MP15. Change sai2a-4 & sai2a-5 to sai2a-2 & sai2a-2. Change sai2a-4 & sai2a-sleep-5 to sai2b-2 & sai2b-sleep-2 Fixes: dcf185ca8175 ("ARM: dts: stm32: Add alternate pinmux for SAI2 pins on stm32mp15") Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18ARM: dts: stm32: fix SAI sub nodes register rangeOlivier Moysan1-8/+8
[ Upstream commit 6f87a74d31277f0896dcf8c0850ec14bde03c423 ] The STM32 SAI subblocks registers offsets are in the range 0x0004 (SAIx_CR1) to 0x0020 (SAIx_DR). The corresponding range length is 0x20 instead of 0x1c. Change reg property accordingly. Fixes: 5afd65c3a060 ("ARM: dts: stm32: add sai support on stm32mp157c") Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18ARM: dts: stm32: fix STUSB1600 Type-C irq level on stm32mp15xx-dkxFabrice Gasnier1-1/+1
[ Upstream commit 3d4fb3d4c431f45272bf8c308d3cbe030817f046 ] STUSB1600 IRQ (Alert pin) is active low (open drain). Interrupts may get lost currently, so fix the IRQ type. Fixes: 83686162c0eb ("ARM: dts: stm32: add STUSB1600 Type-C using I2C4 on stm32mp15xx-dkx") Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18ARM: dts: stm32: Reduce DHCOR SPI NOR frequency to 50 MHzMarek Vasut1-1/+1
[ Upstream commit 2012579b31293d0a8cf2024e9dab66810bf1a15e ] The SPI NOR is a bit further away from the SoC on DHCOR than on DHCOM, which causes additional signal delay. At 108 MHz, this delay triggers a sporadic issue where the first bit of RX data is not received by the QSPI controller. There are two options of addressing this problem, either by using the DLYB block to compensate the extra delay, or by reducing the QSPI bus clock frequency. The former requires calibration and that is overly complex, so opt for the second option. Fixes: 76045bc457104 ("ARM: dts: stm32: Add QSPI NOR on AV96") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18arm: dts: omap3-gta04a4: accelerometer irq fixAndreas Kemnade1-1/+1
[ Upstream commit 884ea75d79a36faf3731ad9d6b9c29f58697638d ] Fix typo in pinctrl. It did only work because the bootloader seems to have initialized it. Fixes: ee327111953b ("ARM: dts: omap3-gta04: Define and use bma180 irq pin") Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18ARM: dts: at91: tse850: the emac<->phy interface is rmiiPeter Rosin1-1/+1
[ Upstream commit dcdbc335a91a26e022a803e1a6b837266989c032 ] This went unnoticed until commit 7897b071ac3b ("net: macb: convert to phylink") which tickled the problem. The sama5d3 emac has never been capable of rgmii, and it all just happened to work before that commit. Fixes: 21dd0ece34c2 ("ARM: dts: at91: add devicetree for the Axentia TSE-850") Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/ea781f5e-422f-6cbf-3cf4-d5a7bac9392d@axentia.se Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18ARM: dts: qcom: msm8974: Add xo_board reference clock to DSI0 PHYMarijn Suijten1-2/+2
[ Upstream commit 8ccecf6c710b8c048eecc65709640642e5357d6e ] According to YAML validation, and for a future patchset putting this xo_board reference clock to use as VCO reference parent, add the missing clock to dsi_phy0. Fixes: 5a9fc531f6ec ("ARM: dts: msm8974: add display support") Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210830175739.143401-1-marijn.suijten@somainline.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18ARM: dts: BCM5301X: Fix memory nodes namesRafał Miłecki11-11/+11
[ Upstream commit c5e1df3276d7a500678da9453be31a66ad115150 ] Thix fixes: arch/arm/boot/dts/bcm4708-netgear-r6250.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 134217728]]} arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 134217728]]} arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 402653184]]} arch/arm/boot/dts/bcm4709-linksys-ea9200.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 134217728]]} arch/arm/boot/dts/bcm4709-netgear-r7000.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 134217728]]} arch/arm/boot/dts/bcm4709-netgear-r8000.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 134217728]]} arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728]]} arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 402653184]]} arch/arm/boot/dts/bcm53016-meraki-mr32.dt.yaml: /: memory: False schema does not allow {'reg': [[0, 134217728]], 'device_type': ['memory']} arch/arm/boot/dts/bcm94708.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728]]} arch/arm/boot/dts/bcm94709.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728]]} Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-10-20Merge tag 'sunxi-fixes-for-5.15-1' of ↵Arnd Bergmann1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes Two patches to fix the GMAC PHY mode on some boards. * tag 'sunxi-fixes-for-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sun7i: A20-olinuxino-lime2: Fix ethernet phy-mode arm64: dts: allwinner: h5: NanoPI Neo 2: Fix ethernet node Link: https://lore.kernel.org/r/d4c41c71-f1ff-4464-a26f-1bfd4b52fd78.lettre@localhost Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-16Merge tag 'arm-soc-fixes-5.15-2' of ↵Linus Torvalds4-15/+24
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "A small number fixes this time, mostly touching actual code: - Add platform device for i.MX System Reset Controller (SRC) to fix a regression caused by fw_devlink change - A fixup for a boot regression caused by my own rework for the Qualcomm SCM driver - Multiple bugfixes for the Arm FFA and optee firmware drivers, addressing problems when they are built as a loadable module - Four dts bugfixes for the Broadcom SoC used in Raspberry pi, addressing VEC (video encoder), MDIO bus controller #address-cells/#size-cells, SDIO voltage and PCIe host bridge dtc warnings" * tag 'arm-soc-fixes-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: imx: register reset controller from a platform driver iommu/arm: fix ARM_SMMU_QCOM compilation ARM: dts: bcm2711-rpi-4-b: Fix usb's unit address ARM: dts: bcm2711-rpi-4-b: Fix pcie0's unit address formatting tee: optee: Fix missing devices unregister during optee_remove ARM: dts: bcm2711-rpi-4-b: fix sd_io_1v8_reg regulator states ARM: dts: bcm2711: fix MDIO #address- and #size-cells ARM: dts: bcm283x: Fix VEC address for BCM2711 firmware: arm_ffa: Fix __ffa_devices_unregister firmware: arm_ffa: Add missing remove callback to ffa_bus_type
2021-10-13Merge tag 'arm-soc/for-5.15/devicetree' of ↵Arnd Bergmann4-15/+24
https://github.com/Broadcom/stblinux into arm/fixes This pull request contains Broadcom ARM-based SoCs Device Tree fixes for 5.15, please pull the following: - Stefan fixes the VEC (video encoder) bus address for 2711, fixes the MDIO bus controller #address-cells/#size-cells inversion and the SDIO regulator voltage ranges - Nicolas fixes DTC warnings for the PCIe host bridge and its child USB device * tag 'arm-soc/for-5.15/devicetree' of https://github.com/Broadcom/stblinux: ARM: dts: bcm2711-rpi-4-b: Fix usb's unit address ARM: dts: bcm2711-rpi-4-b: Fix pcie0's unit address formatting ARM: dts: bcm2711-rpi-4-b: fix sd_io_1v8_reg regulator states ARM: dts: bcm2711: fix MDIO #address- and #size-cells ARM: dts: bcm283x: Fix VEC address for BCM2711 Link: https://lore.kernel.org/r/20211012213841.1872021-1-f.fainelli@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-12ARM: dts: bcm2711-rpi-4-b: Fix usb's unit addressNicolas Saenz Julienne1-2/+2
The unit address is supposed to represent '<device>,<function>'. Which are both 0 for RPi4b's XHCI controller. On top of that although OpenFirmware states bus number goes in the high part of the last reg parameter, FDT doesn't seem to care for it[1], so remove it. [1] https://patchwork.kernel.org/project/linux-arm-kernel/patch/20210830103909.323356-1-nsaenzju@redhat.com/#24414633 Fixes: 258f92d2f840 ("ARM: dts: bcm2711: Add reset controller to xHCI node") Suggested-by: Rob Herring <robh@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210831125843.1233488-2-nsaenzju@redhat.com Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
2021-10-12ARM: dts: bcm2711-rpi-4-b: Fix pcie0's unit address formattingNicolas Saenz Julienne1-1/+2
dtbs_check currently complains that: arch/arm/boot/dts/bcm2711-rpi-4-b.dts:220.10-231.4: Warning (pci_device_reg): /scb/pcie@7d500000/pci@1,0: PCI unit address format error, expected "0,0" Unsurprisingly pci@0,0 is the right address, as illustrated by its reg property: &pcie0 { pci@0,0 { /* * As defined in the IEEE Std 1275-1994 document, * reg is a five-cell address encoded as (phys.hi * phys.mid phys.lo size.hi size.lo). phys.hi * should contain the device's BDF as 0b00000000 * bbbbbbbb dddddfff 00000000. The other cells * should be zero. */ reg = <0 0 0 0 0>; }; }; The device is clearly 0. So fix it. Also add a missing 'device_type = "pci"'. Fixes: 258f92d2f840 ("ARM: dts: bcm2711: Add reset controller to xHCI node") Suggested-by: Rob Herring <robh@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210831125843.1233488-1-nsaenzju@redhat.com Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
2021-10-08ARM: dts: spear3xx: Fix gmac nodeHerve Codina1-1/+1
On SPEAr3xx, ethernet driver is not compatible with the SPEAr600 one. Indeed, SPEAr3xx uses an earlier version of this IP (v3.40) and needs some driver tuning compare to SPEAr600. The v3.40 IP support was added to stmmac driver and this patch fixes this issue and use the correct compatible string for SPEAr3xx Signed-off-by: Herve Codina <herve.codina@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-07Merge tag 'omap-for-v5.15/fixes-rc4' of ↵Arnd Bergmann1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fixes for omaps for v5.15 Few regression fixes for omaps for the v5.15-rc cycle. There is a fix for boot time hangs that can happen on some am335x devices that started when the pruss devicetree nodes were added. The other fixes are less critical: - Fix compiler warning for sysc_init_soc() that got recently introduced - Fix external abort for am335x pruss as otherwise some am335x will hang - Use CLKDM_NOAUTO quirk also for dra7 dcan1 - Fix older NAND device node regression for omap3-sdp * tag 'omap-for-v5.15/fixes-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: omap3430-sdp: Fix NAND device node bus: ti-sysc: Use CLKDM_NOAUTO for dra7 dcan1 for errata i893 soc: ti: omap-prm: Fix external abort for am335x pruss bus: ti-sysc: Add break in switch statement in sysc_init_soc() Link: https://lore.kernel.org/r/pull-1633609552-789682@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-06Merge tag 'imx-fixes-5.15-2' of ↵Arnd Bergmann2-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.15, round 2: - A couple of fixes from Haibo Chen to update SPI NOR TX bus width for i.MX6 and i.MX8 boards. This becomes necessary because spi-nor driver starts using the setting in DT. - Mark buck2 always-on for i.MX8MM Kontron-n801x-som board to avoid the core supply being turned off unexpectedly. - Fix eSDHC2 device tree settings for LS1028A SoC. - Disable GIC CPU interface before calling stby-poweroff sequence to fix power-off failure on i.MX6. - Fix M2_RST# GPIO pinmux on i.MX8M venice-gw7902 boards. * tag 'imx-fixes-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: imx8m*-venice-gw7902: fix M2_RST# gpio ARM: imx6: disable the GIC CPU interface before calling stby-poweroff sequence arm64: dts: ls1028a: fix eSDHC2 node arm64: dts: imx8mm-kontron-n801x-som: do not allow to switch off buck2 arm64: dts: imx8: change the spi-nor tx ARM: dts: imx: change the spi-nor tx Link: https://lore.kernel.org/r/20211006125734.GA10197@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-06ARM: dts: bcm2711-rpi-4-b: fix sd_io_1v8_reg regulator statesStefan Wahren1-2/+2
DT schema check complains at sd_io_1v8_reg about the following: [1800000, 1, 3300000, 0] is too long Additional items are not allowed (3300000, 0 were unexpected) So fix the states definition. Fixes: 7dbe8c62ceeb ("ARM: dts: Add minimal Raspberry Pi 4 support") Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://lore.kernel.org/r/1628334401-6577-3-git-send-email-stefan.wahren@i2se.com Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
2021-10-06ARM: dts: bcm2711: fix MDIO #address- and #size-cellsStefan Wahren1-2/+2
The values of #address-cells and #size-cells are swapped. Fix this and avoid the following DT schema warnings for mdio@e14: #address-cells:0:0: 1 was expected #size-cells:0:0: 0 was expected Fixes: be8af7a9e3cc ("ARM: dts: bcm2711-rpi-4: Enable GENET support") Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://lore.kernel.org/r/1628334401-6577-2-git-send-email-stefan.wahren@i2se.com Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
2021-10-06ARM: dts: bcm283x: Fix VEC address for BCM2711Mateusz Kwiatkowski3-8/+16
The VEC has a different address (0x7ec13000) on the BCM2711 (used in e.g. Raspberry Pi 4) compared to BCM283x (e.g. Pi 3 and earlier). This was erroneously not taken account for. Definition of the VEC in the devicetrees had to be moved from bcm283x.dtsi to bcm2711.dtsi and bcm2835-common.dtsi to allow for this differentiation. Fixes: 7894bdc6228f ("ARM: boot: dts: bcm2711: Add BCM2711 VEC compatible") Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://lore.kernel.org/r/1626980528-3835-1-git-send-email-stefan.wahren@i2se.com Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
2021-10-06ARM: dts: omap3430-sdp: Fix NAND device nodeRoger Quadros1-1/+1
Nand is on CS1 so reg properties first field should be 1 not 0. Fixes: 44e4716499b8 ("ARM: dts: omap3: Fix NAND device nodes") Cc: stable@vger.kernel.org # v4.6+ Signed-off-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-10-05Merge tag 'imx-fixes-5.15' of ↵Arnd Bergmann3-2/+18
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.15: - Revert cc8870bf4c3a to fix the regression on i.MX6 that suspend support becomes broken. - Add `qca,clk-out-frequency` property to fix Ethernet support on imx6qdl-pico board. - Re-enable FB support in imx_v6_v7_defconfig. It gets lost due to f611b1e7624c ("drm: Avoid circular dependencies for CONFIG_FB"). - Fix LP5562 LED support on imx6dl-yapp4 board. - Add missing pinctrl-names for panel on M53Menlo board. - Fix USB host power regulator polarity on M53Menlo board. * tag 'imx-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: imx_v6_v7_defconfig: enable fb ARM: dts: imx6qdl-pico: Fix Ethernet support ARM: dts: imx: Fix USB host power regulator polarity on M53Menlo ARM: dts: imx: Add missing pinctrl-names for panel on M53Menlo Revert "ARM: imx6q: drop of_platform_default_populate() from init_machine" ARM: dts: imx6dl-yapp4: Fix lp5562 LED driver probe Link: https://lore.kernel.org/r/20210923063356.GK13480@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-05Merge tag 'juno-fixes-5.15' of ↵Arnd Bergmann6-238/+123
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes Juno/Vexpress fixes for v5.15 Bunch of DTS fixes to resolve addressing issues with some of the device nodes, dropping unused/undocumented properties in various nodes, and aligning node names with dtschema. * tag 'juno-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: arm: dts: vexpress: Fix motherboard bus 'interrupt-map' arm: dts: vexpress: Fix addressing issues with 'motherboard-bus' nodes arm: dts: vexpress-v2p-ca9: Fix the SMB unit-address arm: dts: vexpress: Drop unused properties from motherboard node arm64: dts: arm: drop unused interrupt-names in MHU ARM: dts: arm: align watchdog and mmc node names with dtschema arm64: dts: arm: align watchdog and mmc node names with dtschema arm64: dts: fvp: Remove panel timings Link: https://lore.kernel.org/r/20210927105249.3583380-1-sudeep.holla@arm.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-05Merge tag 'qcom-dts-fixes-for-5.15' of ↵Arnd Bergmann1-8/+7
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes Qualcomm DTS fixes for v5.15 This corrects the use of depricated chipid and clock names, for which support was finally dropped from the driver. It also ensures that the DSI PLL is fed by the correct clock, now that it's being migrated to not rely on global clock names. * tag 'qcom-dts-fixes-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: ARM: dts: qcom: apq8064: update Adreno clock names ARM: dts: qcom: apq8064: Use 27MHz PXO clock as DSI PLL reference ARM: dts: qcom: apq8064: use compatible which contains chipid Link: https://lore.kernel.org/r/20210930025526.1146-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-04ARM: dts: at91: sama7g5ek: to not touch slew-rate for SDMMC pinsClaudiu Beznea1-0/+6
With commit c709135e576b ("pinctrl: at91-pio4: add support for slew-rate") and commit cbde6c823bfa ("pinctrl: at91-pio4: Fix slew rate disablement") the slew-rate is enabled by default for each configured pin. The datasheet specifies at chapter "Output Driver AC Characteristics" that HSIO drivers (use in SDMMCx and QSPI0 peripherals), don't have a slewrate setting but are rather calibrated against an external 1% resistor mounted on the SDMMCx_CAL or QSPI0_CAL pins. Depending on the target signal frequency and the external load, it is possible to adjust their target output impedance. Thus set slew-rate = <0> for SDMMC (QSPI is not enabled at the moment in device tree). Fixes: 7540629e2fc7 ("ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20210915074836.6574-3-claudiu.beznea@microchip.com
2021-10-04ARM: dts: at91: sama7g5ek: use proper slew-rate settings for GMACsClaudiu Beznea1-6/+22
Datasheet chapter "EMAC Timings" specifies that while in 3.3V domain GMAC's MDIO pins should be configured with slew-rate enabled, while the data + signaling pins should be configured with slew-rate disabled when GMAC works in RGMII or RMII modes. The pin controller for SAMA7G5 sets the slew-rate as enabled for all pins. Adapt the device tree to comply with these. Fixes: 7540629e2fc7 ("ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20210915074836.6574-2-claudiu.beznea@microchip.com
2021-10-04ARM: dts: at91: sama7g5ek: add suspend voltage for ddr3l railClaudiu Beznea1-0/+2
SAMA7G5-EK board has DDR3L type of memory soldered. This needs 1.35V. The 1.35V for DDR3L rail at run-time is selected by the proper configuration on SELV2 pin (for 1.35V it needs to be in high-z state). When suspended the MCP16502 PMIC soldered on SAMA7G5-EK will use different sets of configuration registers to provide proper voltages on its rail. Run-time configuration registers could be configured differently than suspend configuration register for MCP16502 (VSEL2 affects only run-time configuration). In suspend states the DDR3L memory soldered on SAMA7G5-EK switches to self-refresh. Even on self-refresh it needs to be powered by a 1.35V rail. Thus, make sure the PMIC is configured properly when system is suspended. Fixes: 7540629e2fc7 (ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20210930154219.2214051-2-claudiu.beznea@microchip.com
2021-10-04ARM: dts: imx: change the spi-nor txHaibo Chen2-3/+3
Before commit 0e30f47232ab5 ("mtd: spi-nor: add support for DTR protocol"), for all PP command, it only support 1-1-1 mode, no matter the tx setting in dts. But after the upper commit, the logic change. It will choose the best mode(fastest mode) which flash device and spi-nor host controller both support. Though the spi-nor device on imx6sx-sdb/imx6ul(l/z)-14x14-evk board do not support PP-1-4-4/PP-1-1-4, but if tx is 4 in dts file, it will also impact the read mode selection. For the spi-nor device on the upper mentioned boards, they support read 1-4-4 mode and read 1-1-4 mode according to the device internal sfdp register. But qspi host controller do not support read 1-4-4 mode. so need to set the tx to 1, let the common code finally select read 1-1-4 mode, PP-1-1-1 mode. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Fixes: 0e30f47232ab ("mtd: spi-nor: add support for DTR protocol") Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-09-26arm: dts: vexpress: Fix motherboard bus 'interrupt-map'Rob Herring6-186/+94
Commit 078fb7aa6a83 ("arm: dts: vexpress: Fix addressing issues with 'motherboard-bus' nodes") broke booting on a couple of 32-bit VExpress boards. The problem is #address-cells size changed, but interrupt-map was not updated. This results in the timer interrupt (and all the other motherboard interrupts) not getting mapped. As the 'interrupt-map' properties are all just duplicates across boards, just move them into vexpress-v2m.dtsi and vexpress-v2m-rs1.dtsi. Strictly speaking, 'interrupt-map' is dependent on the parent interrupt controller, but it's not likely we'll ever have a different parent than GICv2 on these old platforms. If there was one, 'interrupt-map' can still be overridden. Link: https://lore.kernel.org/r/20210924214221.1877686-1-robh@kernel.org Fixes: 078fb7aa6a83 ("arm: dts: vexpress: Fix addressing issues with 'motherboard-bus' nodes") Cc: Guillaume Tucker <guillaume.tucker@collabora.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: linux-arm-kernel@lists.infradead.org Reported-by: Reported-by: "kernelci.org bot" <bot@kernelci.org> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-09-24ARM: dts: sun7i: A20-olinuxino-lime2: Fix ethernet phy-modeBastien Roucariès1-1/+1
Commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config") sets the RX/TX delay according to the phy-mode property in the device tree. For the A20-olinuxino-lime2 board this is "rgmii", which is the wrong setting. Following the example of a900cac3750b ("ARM: dts: sun7i: a20: bananapro: Fix ethernet phy-mode") the phy-mode is changed to "rgmii-id" which gets the Ethernet working again on this board. Signed-off-by: Bastien Roucariès <rouca@debian.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210916081721.237137-1-rouca@debian.org
2021-09-22ARM: dts: imx6qdl-pico: Fix Ethernet supportFabio Estevam1-0/+11
Currently, it is no longer possible to retrieve a DHCP address on the imx6qdl-pico board. This issue has been exposed by commit f5d9aa79dfdf ("ARM: imx6q: remove clk-out fixup for the Atheros AR8031 and AR8035 PHYs"). Fix it by describing the qca,clk-out-frequency property as suggested by the commit above. Fixes: 98670a0bb0ef14bbb3 ("ARM: dts: imx6qdl: Add imx6qdl-pico support") Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-09-22ARM: dts: imx: Fix USB host power regulator polarity on M53MenloMarek Vasut1-2/+1
The MIC2025 switch input signal nEN is active low, describe it as such in the DT. The previous change to this regulator polarity was incorrectly influenced by broken quirks in gpiolib-of.c, which is now long fixed. So fix this regulator polarity setting here once and for all. Fixes: 3c3601cd6a6d3 ("ARM: dts: imx53: Update USB configuration on M53Menlo") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-09-22ARM: dts: imx: Add missing pinctrl-names for panel on M53MenloMarek Vasut1-0/+1
The panel already contains pinctrl-0 phandle, but it is missing the default pinctrl-names property, so the pin configuration is ignored. Fill in the missing pinctrl-names property, so the pin configuration is applied. Fixes: d81765d693db6 ("ARM: dts: imx53: Update LCD panel node on M53Menlo") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-09-22ARM: dts: imx6dl-yapp4: Fix lp5562 LED driver probeMichal Vokáč1-0/+5
Since the LED multicolor framework support was added in commit 92a81562e695 ("leds: lp55xx: Add multicolor framework support to lp55xx") LEDs on this platform stopped working. Author of the framework attempted to accommodate this DT to the framework in commit b86d3d21cd4c ("ARM: dts: imx6dl-yapp4: Add reg property to the lp5562 channel node") but that is not sufficient. A color property is now required even if the multicolor framework is not used, otherwise the driver probe fails: lp5562: probe of 1-0030 failed with error -22 Add the color property to fix this. Fixes: 92a81562e695 ("leds: lp55xx: Add multicolor framework support to lp55xx") Cc: <stable@vger.kernel.org> Cc: linux-leds@vger.kernel.org Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com> Acked-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-09-20ARM: dts: qcom: apq8064: update Adreno clock namesDavid Heidelberg1-4/+4
The legacy clock names (including the _clk suffix) was dropped from the driver, so update the dts accordingly). Tested on Nexus 7 2013, no functional changes. Signed-off-by: David Heidelberg <david@ixit.cz> [bjorn: Updated commit message] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210829133918.57780-2-david@ixit.cz
2021-09-17arm: dts: vexpress: Fix addressing issues with 'motherboard-bus' nodesRob Herring6-44/+26
The 'motherboard-bus' node in Arm Ltd boards fails schema checks as 'simple-bus' child nodes must have a unit-address. The 'ranges' handling is also wrong (or at least strange) as the mapping of SMC chip selects should be in the 'arm,vexpress,v2m-p1' node rather than a generic 'simple-bus' node. Either there's 1 too many levels of 'simple-bus' nodes or 'ranges' should be moved down a level. The latter change is more simple, so let's do that. As the 'ranges' value doesn't vary for a given motherboard instance, we can move 'ranges' into the motherboard dtsi files. Link: https://lore.kernel.org/r/20210819184239.1192395-6-robh@kernel.org Cc: Andre Przywara <andre.przywara@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-20 23:34:10 +0300