summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts
AgeCommit message (Collapse)AuthorFilesLines
2021-01-14ARM: dts: stm32: Disable KS8851 and FMC on PicoITX boardMarek Vasut1-0/+8
The PicoITX has only one ethernet routed out, so the KS8851 is not used at all. Disable the KS8851 and the entire FMC controller. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-01-14ARM: dts: stm32: Fix schema warnings for pwm-leds on lxa-mc1Alexander Dahl1-6/+7
The node names for devices using the pwm-leds driver follow a certain naming scheme (now). Parent node name is not enforced, but recommended by DT project. DTC arch/arm/boot/dts/stm32mp157c-lxa-mc1.dt.yaml CHECK arch/arm/boot/dts/stm32mp157c-lxa-mc1.dt.yaml /home/alex/build/linux/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dt.yaml: led-rgb: 'led-blue', 'led-green', 'led-red' do not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+' From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml Signed-off-by: Alexander Dahl <post@lespocky.de> Acked-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-01-14ARM: dts: stm32: Disable SDMMC1 CKIN feedback clock on DHCOMMarek Vasut1-1/+0
The STM32MP1 DHCOM SoM can be built with either bus voltage level shifter or without one on the SDMMC1 interface. Because the SDMMC1 interface is limited to 50 MHz and hence SD high-speed anyway, disable the SD feedback clock to permit operation of the same U-Boot image on both SoM with and without voltage level shifter. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-01-14ARM: dts: stm32: Enable internal pull-ups for SDMMC1 on DHCOM SoMMarek Vasut1-0/+14
The default state of SD bus and clock line is logical HI. SD card IO is open-drain and pulls the bus lines LO. Always enable the SD bus pull ups to guarantee this behavior on DHCOM SoM. Note that on SoMs with SD bus voltage level shifter, the pull ups are built into the level shifter, however that has no negative impact. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-01-14ARM: dts: stm32: Fix GPIO hog flags on DHCOM DRC02Marek Vasut1-2/+2
The GPIO hog flags are ignored by gpiolib-of.c now, set the flags to 0. Since GPIO_ACTIVE_HIGH is defined as 0, this change only increases the correctness of the DT. Fixes: fde180f06d7b ("ARM: dts: stm32: Add DHSOM based DRC02 board") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-01-14ARM: dts: stm32: Fix GPIO hog flags on DHCOM PicoITXMarek Vasut1-1/+1
The GPIO hog flags are ignored by gpiolib-of.c now, set the flags to 0. Due to a change in gpiolib-of.c, setting flags to GPIO_ACTIVE_LOW and using output-low DT property leads to the GPIO being set high instead. Fixes: ac68793f49de ("ARM: dts: stm32: Add DHCOM based PicoITX board") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-01-14ARM: dts: stm32: Fix GPIO hog names on DHCOMMarek Vasut2-3/+3
The GPIO hog node name should match regex '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', make it so and fix the following two make dtbs_check warnings: arch/arm/boot/dts/stm32mp157c-dhcom-picoitx.dt.yaml: hog-usb-port-power: $nodename:0: 'hog-usb-port-power' does not match '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$' arch/arm/boot/dts/stm32mp153c-dhcom-drc02.dt.yaml: hog-usb-hub: $nodename:0: 'hog-usb-hub' does not match '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$' Fixes: ac68793f49de ("ARM: dts: stm32: Add DHCOM based PicoITX board") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-01-14ARM: dts: stm32: Disable optional TSC2004 on DRC02 boardMarek Vasut1-0/+6
The DRC02 has no use for the on-SoM touchscreen controller, and the on-SoM touchscreen controller may not even be populated, which then results in error messages in kernel log. Disable the touchscreen controller in DT. Fixes: fde180f06d7b ("ARM: dts: stm32: Add DHSOM based DRC02 board") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-01-14ARM: dts: stm32: Disable WP on DHCOM uSD slotMarek Vasut1-0/+1
The uSD slot has no WP detection, disable it. Fixes: 34e0c7847dcf ("ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-01-14ARM: dts: stm32: Connect card-detect signal on DHCOMMarek Vasut1-1/+1
The DHCOM SoM uSD slot card detect signal is connected to GPIO PG1, describe it in the DT. Fixes: 34e0c7847dcf ("ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-01-14ARM: dts: stm32: Fix polarity of the DH DRC02 uSD card detectMarek Vasut1-1/+1
The uSD card detect signal on the DH DRC02 is active-high, with a default pull down resistor on the board. Invert the polarity. Fixes: fde180f06d7b ("ARM: dts: stm32: Add DHSOM based DRC02 board") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org -- Note that this could not be tested on prototype SoMs, now that it is tested, this issue surfaced, so it needs to be fixed. Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-01-13ARM: dts: ux500: Add die temperature to AB8505Linus Walleij1-1/+5
The AB8505 mixed signal ASIC variant has a die temperature channel that is missing in the AB8500 variant. Add it to the DTSI. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-13ARM: dts: ux500: Push VMMCI down to each treeLinus Walleij8-42/+153
The setting of VMMCI differs so much between different boards that we need to handle it on a per-board basis rather that complicating things by overriding stuff from the included DTSI:s. Push it down into top-level tree instead. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-13ARM: dts: ux500: Remove the GPADC HW IRQLinus Walleij1-4/+3
The AB8505 variant lacks the hardware conversion IRQ, so do not put it in with this variant. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-13ARM: dts: ux500: Add thermistors to the HREFLinus Walleij1-0/+58
This adds the two temperature-monitoring thermistors to the HREF reference design, defines a thermal zone for the chassis and sets some reasonable thermal limits. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-13ARM: dts: ux500: Add interrupts to chargerLinus Walleij2-3/+101
The different charger nodes in the AB8500 and AB8505 includes was missing the interrupt assignments for the interrupts necessary to drive the AB8500/AB8505 charging state machine. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-13ARM: dts: ux500: Fix channel names attributesLinus Walleij2-7/+7
The AB8500/AB8505 is providing ADC channels and do so using the standard property "io-channel-names" not the mistakenly singular form "io-channel-name". Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-13ARM: dts: ux500: Add a device tree for JaniceLinus Walleij2-0/+895
This adds a basic device tree for the Samsung GT-I9070 mobile phone also known as Janice. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-13ARM: dts: sun5i: add A10s/A13 mali gpu support fallbackSergio Sota1-0/+12
The A10s/A13 mali gpu was not defined in device tree Add A10 mali gpu as a fallback for A10s/A13 Tested with Olimex-A13-SOM / Olimex-A13-OlinuXino-MICRO "kmscube" 3d cube on screen (60fps / 10%cpu) Versions: Lima:1.1.0 EGL:1.4 OpenGLES:2.0 Mesa:20.2.2 Signed-off-by: Sergio Sota <sergiosota@fanamoel.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210108103819.322901-1-sergiosota@fanamoel.com
2021-01-11ARM: dts: imx6qdl-gw52xx: fix duplicate regulator namingKoen Vandeputte1-1/+1
2 regulator descriptions carry identical naming. This leads to following boot warning: [ 0.173138] debugfs: Directory 'vdd1p8' with parent 'regulator' already present! Fix this by renaming the one used for audio. Fixes: 5051bff33102 ("ARM: dts: imx: ventana: add LTC3676 PMIC support") Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> Cc: stable@vger.kernel.org # v4.11 Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-11ARM: dts: add Protonic PRTI6G boardOleksij Rempel2-0/+357
Protonic PRTI6G is a reference platform for industrial, safety critical applications Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-11ARM: dts: imx6q(dl): Move 'port' nodes under 'ports' for HDMI encoderLaurent Pinchart2-20/+25
In preparation for the conversion of the DWC HDMI TX device tree bindings to YAML, move the HDMI encoder's 'port' nodes under a 'ports' node. The 'ports' node is optional in the OF graph implementation, but YAML bindings require it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-11ARM: dts: add Protonic MVT boardOleksij Rempel2-0/+853
PRTMVT is the reference platform for Protonic industrial touchscreen terminals. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-11ARM: dts: imx6qdl-kontron-samx6i: fix i2c_lcd/cam default statusMarco Felsch1-2/+2
Fix typo so the gpio i2c busses are really disabled. Fixes: 2125212785c9 ("ARM: dts: imx6qdl-kontron-samx6i: add Kontron SMARC SoM Support") Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-11ARM: dts: tbs2910: rename MMC node aliasesSoeren Moch1-0/+7
to be consistent with kernel versions up to v5.9 (mmc aliases not used here). usdhc1 is not wired up on this board and therefore cannot be used. Start mmc aliases with usdhc2. Signed-off-by: Soeren Moch <smoch@web.de> Cc: stable@vger.kernel.org # 5.10.x Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-10ARM: dts: imx6q-logicpd: Drop unused clock-names referenceAdam Ford1-1/+0
The wlf,wm8962 driver does not use the clock-names property. Drop it. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-09ARM: dts: rockchip: add QoS register compatibles for rk3288Johan Jonker1-14/+14
With the conversion of syscon.yaml minItems for compatibles was set to 2. Current Rockchip dtsi files only use "syscon" for QoS registers. Add Rockchip QoS compatibles for rk3288 to reduce notifications produced with: make ARCH=arm dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/mfd/syscon.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20201206103711.7465-2-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-01-09ARM: dts: rockchip: add QoS register compatibles for rk3066/rk3188Johan Jonker1-8/+8
With the conversion of syscon.yaml minItems for compatibles was set to 2. Current Rockchip dtsi files only use "syscon" for QoS registers. Add Rockchip QoS compatibles for rk3066/rk3188 to reduce notifications produced with: make ARCH=arm dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/mfd/syscon.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20201206103711.7465-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-01-09ARM: dts: rockchip: add gpu node to rk3288-miqiDemetris Ierokipides1-0/+5
Add the Mali GPU node to the MiQi device-tree. Signed-off-by: Demetris Ierokipides <ierokipides.dem@gmail.com> Link: https://lore.kernel.org/r/20210108151036.36434-2-ierokipides.dem@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-01-09Merge tag 'arm-fixes-5.11-1' of ↵Linus Torvalds3-0/+13
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "These are a small number of bug fixes that all came in before or during the merge window, most for the omap platform: - One boot regression fix for Nokia N9 (OMAP3). - Two small defconfig changes for omap2, to reflect changes in drivers - Warning fixes for DT issues on omap2, picoxcell and bitmap SoCs. The picoxcell platform will be removed in v5.12, but fixing it first makes it easier to backport to the fix to stable kernels and get a clean build with new dtc versions" * tag 'arm-fixes-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: picoxcell: fix missing interrupt-parent properties ARM: dts: ux500/golden: Set display max brightness arm64: dts: bitmain: Use generic "ngpios" rather than "snps,nr-gpios" ARM: omap2: pmic-cpcap: fix maximum voltage to be consistent with defaults on xt875 ARM: omap2plus_defconfig: enable SPI GPIO ARM: OMAP2+: omap_device: fix idling of devices during probe ARM: dts: OMAP3: disable AES on N950/N9 ARM: omap2plus_defconfig: drop unused POWER_AVS option
2021-01-08Merge tag 'v5.11-berlin-dts' of ↵Arnd Bergmann4-21/+21
git://git.kernel.org/pub/scm/linux/kernel/git/jszhang/linux-berlin into arm/dt v5.11-berlin-dts * tag 'v5.11-berlin-dts' of git://git.kernel.org/pub/scm/linux/kernel/git/jszhang/linux-berlin: ARM: dts: berlin: Use generic "ngpios" rather than "snps,nr-gpios" ARM: dts: berlin: Fix schema warnings for pwm-leds Link: https://lore.kernel.org/r/20201211100521.2e6f4faa@xhacker.debian Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-01-08ARM: dts: Remove PicoXcell platformsRob Herring5-759/+0
PicoXcell has had nothing but treewide cleanups for at least the last 8 years and no signs of activity. The most recent activity is a yocto vendor kernel based on v3.0 in 2015. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Jamie Iles <jamie@jamieiles.com> Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20201210200315.2965567-2-robh@kernel.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-01-08ARM: picoxcell: fix missing interrupt-parent propertiesArnd Bergmann1-0/+4
dtc points out that the interrupts for some devices are not parsable: picoxcell-pc3x2.dtsi:45.19-49.5: Warning (interrupts_property): /paxi/gem@30000: Missing interrupt-parent picoxcell-pc3x2.dtsi:51.21-55.5: Warning (interrupts_property): /paxi/dmac@40000: Missing interrupt-parent picoxcell-pc3x2.dtsi:57.21-61.5: Warning (interrupts_property): /paxi/dmac@50000: Missing interrupt-parent picoxcell-pc3x2.dtsi:233.21-237.5: Warning (interrupts_property): /rwid-axi/axi2pico@c0000000: Missing interrupt-parent There are two VIC instances, so it's not clear which one needs to be used. I found the BSP sources that reference VIC0, so use that: https://github.com/r1mikey/meta-picoxcell/blob/master/recipes-kernel/linux/linux-picochip-3.0/0001-picoxcell-support-for-Picochip-picoXcell-SoC.patch Acked-by: Jamie Iles <jamie@jamieiles.com> Link: https://lore.kernel.org/r/20201230152010.3914962-1-arnd@kernel.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-01-07ARM: dts: arria10: add PMU nodeDinh Nguyen1-2/+11
Add the PMU node for Arria10. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2021-01-07Merge tag 'drm-misc-next-2020-12-17' of ↵Daniel Vetter1-0/+6
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v5.12: UAPI Changes: - Not necessarily one, but we document that userspace needs to force probe connectors. Cross-subsystem Changes: - Require FB_ATY_CT for aty on sparc64. - video: Fix documentation, and a few compiler warnings. - Add devicetree bindings for DP connectors. - dma-buf: Update kernel-doc, and add might_lock for resv objects in begin/end_cpu_access. Core Changes: - ttm: Warn when releasing a pinned bo. - ttm: Cleanup bo size handling. - cma-helper: Remove prime infix, and implement mmap as GEM CMA functions. - Split drm_prime_sg_to_page_addr_arrays into 2 functions. - Add a new api to install irq using devm. - Update panel kerneldoc to inline style. - Add DP support to drm/bridge. - Assorted small fixes to ttm, fb-helper, scheduler. - Add atomic_commit_setup function callback. - Automatically use the atomic gamma_set, instead of forcing drivers to declare the default atomic version. - Allow using degamma for legacy gamma if gamma is not available. - Clarify that primary/cursor planes are not tied to 1 crtc (depending on possible_crtcs). - ttm: Cleanup the lru handler. Driver Changes: - Add pm support to ingenic. - Assorted small fixes in radeon, via, rockchip, omap2fb, kmb, gma500, nouveau, virtio, hisilicon, ingenic, s6e63m0 panel, ast, udlfb. - Add BOE NV110WTM-N61, ys57pss36bh5gq, Khadas TS050 panels. - Stop using pages with drm_prime_sg_to_page_addr_arrays, and switch all callers to use ttm_sg_tt_init. - Cleanup compiler and docbook warnings in a lot of fbdev devices. - Use the drmm_vram_helper in hisilicon. - Add support for BCM2711 DSI1 in vc4. - Add support for 8-bit delta RGB panels to ingenic. - Add documentation on how to test vkms. - Convert vc4 to atomic helpers. - Use degamma instead of gamma table in omap, to add support for CTM and color encoding/range properties. - Rework omap DSI code, and merge all omapdrm modules now that the last omap panel is now a drm panel. - More refactoring of omap dsi code. - Enable 10/12 bpc outputs in vc4. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/78381a4f-45fd-aed4-174a-94ba051edd37@linux.intel.com
2021-01-07ARM: dts: sun8i: r40: Add deinterlace nodeJernej Skrabec1-0/+19
R40 contains deinterlace core compatible to that in H3. One peculiarity is that RAM gate is shared with CSI1. User manual states it's separate but that's not true. Shared gate was verified with BSP Linux code check and with runtime tests (CPU crashed if CSI1 gate was not ungated). Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210106181901.1324075-3-jernej.skrabec@siol.net
2021-01-07ARM: dts: imx28: add pinmux for USB1 overcurrent on pwm2Mans Rullgard1-0/+10
Add pinmux setting for USB1 overcurrent on pwm2 pad. Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-07ARM: dts: add Plymovent BAS boardOleksij Rempel2-0/+395
Plymovent BAS is a base system controller produced for the Plymovent filter systems. Co-Developed-by: David Jander <david@protonic.nl> Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-07ARM: dts: add Plymovent M2M boardOleksij Rempel2-0/+447
Plymovent M2M is a control interface produced for the Plymovent filter systems. Co-Developed-by: David Jander <david@protonic.nl> Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-07ARM: dts: qcom: sdx55-mtp: Add regulator nodesVinod Koul1-0/+164
This adds the regulators found on SDX55 MTP. Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210106125322.61840-19-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-01-07ARM: dts: qcom: sdx55-mtp: Add pmx55 pmicVinod Koul1-0/+1
SDX55-mtp features PMX55 pmic, so include the dts as well Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210106125322.61840-16-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-01-07ARM: dts: qcom: Add PMIC pmx55 dtsVinod Koul1-0/+84
This adds DTS for PMIC PMX55 found in Qualcomm platforms. Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210106125322.61840-18-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-01-07ARM: dts: qcom: sdx55: Add rpmpd nodeVinod Koul1-0/+51
This adds rpmpd node and opps for this node to the SDX55 dts. Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210106125322.61840-17-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-01-07ARM: dts: qcom: sdx55-mtp: Add pm8150b pmicVinod Koul1-0/+1
SDX55-mtp features PM8150B pmic, so include the dts as well Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210106125322.61840-15-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-01-07ARM: dts: qcom: sdx55: Add spmi nodeVinod Koul1-0/+19
This adds SPMI node to SDX55 dts. Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210106125322.61840-14-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-01-07ARM: dts: qcom: sdx55-mtp: Enable QPIC NANDManivannan Sadhasivam1-0/+12
Enable QPIC NAND on SDX55-MTP board. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20210106125322.61840-13-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-01-07ARM: dts: qcom: sdx55-mtp: Enable BAM DMAManivannan Sadhasivam1-0/+4
Enable BAM DMA on SDX55-MTP board. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20210106125322.61840-12-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-01-07ARM: dts: qcom: sdx55: Add QPIC NAND supportManivannan Sadhasivam1-0/+22
Add qpic_nand node to support QPIC NAND controller on SDX55 platform. Since there is no "aon" clock in SDX55, a dummy clock is provided. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210106125322.61840-11-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-01-07ARM: dts: qcom: sdx55: Add QPIC BAM supportManivannan Sadhasivam1-0/+12
Add qpic_bam node to support QPIC BAM DMA controller on SDX55 platform. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20210106125322.61840-10-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-01-07ARM: dts: qcom: sdx55: Add Shared memory manager supportManivannan Sadhasivam1-0/+6
Add smem node to support shared memory manager on SDX55 platform. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20210106125322.61840-9-manivannan.sadhasivam@linaro.org [bjorn: Moved smem node out from /soc] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-02 14:49:06 +0300