summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/stih416-pinctrl.dtsi
AgeCommit message (Collapse)AuthorFilesLines
2016-09-06ARM: dts: STiH416: Declare PWM Capture data lines via PinctrlLee Jones1-0/+5
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-09-06ARM: dts: STiH416-pinctrl: update gpio-cells to 2Patrice Chotard1-30/+30
This patch allows to use second parameter to the gpio specifier, which is used to specify whether the gpio is active high or low. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2015-05-13ARM: STi: STiH416: Add Pinctrl settings for PWMLee Jones1-0/+50
Supply the Pinctrl configuration to enable PWM{0,1} lines on STiH416 based development boards. Signed-off-by: Ajit Pal Singh <ajitpal.singh@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2014-11-18ARM: STi: DT: STiH416: Add pinctl setup for usb controllers.Peter Griffin1-0/+34
This patch adds the required pin config for all usb controllers on the stih416. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2014-10-31ARM: STi: DT: Add sdhci pins for stih416Peter Griffin1-0/+39
This adds the required pin config for both SDHCI controllers on the stih416 SoC. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2014-10-31ARM: STi: DT: STiH41x: Convert all uppercase non-defines to lowercaseLee Jones1-171/+171
Suggested-by: Olof Johansson <olof@lixom.net> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2014-05-24Merge tag 'sti-dt-for-v3.16-1' of ↵Arnd Bergmann1-0/+16
git://git.stlinux.com/devel/kernel/linux-sti into next/dt Merge "ARM: STi: DT changes for v3.16, v3" from Maxime Coquelin: Please consider these STi DT updates for v3.16. This 3rd version takes into account Olof's comments on the v2: - Fix upper-cases in labels and node names - Sort compatibles order from specific to generic - Sort dts entries in Makefile It also adds support for the B2020 revision E board for STiH416 SoC. Note that two reset patches are part of this pull request, in order to avoid compilation breakage. Adding these two patches in this pull request has been accepted by Philipp Zabel. * tag 'sti-dt-for-v3.16-1' of git://git.stlinux.com/devel/kernel/linux-sti: (23 commits) ARM: sti: stih41x: Provide a proper header for this DTSI file ARM: sti: stih416: Enable board LED support for B2020 RevE ARM: sti: stih416: Add support for B2020 RevE ARM: STi: DT: STiH41x Add clk_ignore_unused to bootargs ARM: STi: DT: STiH415: 415 DT Entry for clockgen A9 ARM: STi: DT: STiH415: Remove unused CLK_S_GMAC0_PHY & CLK_S_ETH1_PHY fixed clocks ARM: STi: DT: STiH415: Remove unused CLK_S_ICN_REG_0 fixed clock ARM: STi: DT: STiH415: 415 DT Entry for clockgen A0/1/10/11/12 ARM: STi: DT: STiH416: 416 DT Entry for clockgen A9/DDR/GPU ARM: STi: DT: STiH416: 416 DT Entry for clockgen B/C/D/E/F ARM: STi: DT: STiH416: Remove unused CLK_S_GMAC0_PHY & CLK_S_ETH1_PHY fixed clocks ARM: STi: DT: STiH416: Remove unused CLK_S_ICN_REG_0 fixed clock ARM: STi: DT: STiH416: 416 DT Entry for clockgen A0/1/10/11/12 ARM: STi: DT: STiH41x: Rename CLK_SYSIN into clk_sysin ARM: STi: DT: add keyscan for stih41x-b2000 ARM: STi: DT: add keyscan for stih416 ARM: STi: DT: add keyscan for stih415 driver: reset: sti: add keyscan for stih416 driver: reset: sti: add keyscan for stih415 ARM: dts: STiH407: Add B2120 board support ... Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-05-21ARM: STi: DT: add keyscan for stih416Gabriel FERNANDEZ1-0/+16
Add keyscan support for stih416. It is disabled by default given that it is not enabled on all boards. Also there are PIOs conflict with already claimed lines. Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Giuseppe Condorelli <giuseppe.condorelli@st.com> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2014-04-23dt: Fix binding typos in clock-names and interrupt-namesGeert Uytterhoeven1-5/+5
s/interrupts-names/interrupt-names/g s/clocks-names/clock-names/g Some of the binding files and device tree files get this wrong and the kernel won't be able to pick it up. Fix them up now so that they don't get widely used. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by : Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-03-27ARM: STi: stih416: Add support for the FSM Serial Flash ControllerLee Jones1-0/+13
Here we add the necessary device nodes required for successful device probing and Pinctrl setup for the FSM when booting on an STiH416 (Orly2). Acked-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Acked-by Angus Clark <angus.clark@st.com> Acked-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-03-11ARM: STi: STIH416: Add IR support.Srinivas Kandagatla1-0/+7
This patch adds IRB support to STiH416 platforms. Tested on B2000 and B2020 development board Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
2014-03-11ARM: STi: STiH416: Add ethernet support.Srinivas Kandagatla1-0/+109
This patch adds support to STiH416 SOC, which has two ethernet snps,dwmac controllers version 3.710. With this patch B2000 and B2020 boards can boot with ethernet in MII and RGMII modes. Tested on both B2020 and B2000. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
2014-03-11ARM: STi: STiH416: Add interrupt support for pin controllerSrinivas Kandagatla1-0/+81
This patch adds interrupt support for STiH416 pin controllers. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
2013-12-04ARM: STi: Supply I2C configuration to STiH416 SoCMaxime COQUELIN1-0/+35
This patch supplies I2C configuration to STiH416 SoC. Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
2013-07-23ARM: dts: STi: Fix pinconf setup for STiH416 serial2Srinivas Kandagatla1-1/+9
This patch fixes a bug in pinctrl setup of serial2 device, Some of the pins in the pinctrl node of serial2 do not belong to that pin-controller. This patch divides them in the pins into there respective pin controller nodes. Without this patch serial on StiH416-B2000 Board will not work as it fails with: "st-pinctrl pin-controller-rear.3: failed to get pin(99) name st-pinctrl pin-controller-rear.3: maps: function serial2 group serial2-0 num 4 pinconfig core: failed to register map default (3): no group/pin given" Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-26ARM: sti: Add STiH416 SOC supportSrinivas Kandagatla1-0/+295
The STiH416 is advanced HD AVC processor with 3D graphics acceleration and 1.2-GHz ARM Cortex-A9 SMP CPU. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> CC: Stephen Gallimore <stephen.gallimore@st.com> CC: Stuart Menefy <stuart.menefy@st.com> CC: Arnd Bergmann <arnd@arndb.de> CC: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: Olof Johansson <olof@lixom.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-05 19:18:29 +0300