summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/rk3288-firefly-reload.dts
AgeCommit message (Collapse)AuthorFilesLines
2020-05-19ARM: dts: rockchip: rename and label gpio-led subnodesJohan Jonker1-6/+6
Current dts files with 'gpio-led' nodes were manually verified. In order to automate this process leds-gpio.txt has been converted to yaml. With this conversion a check for pattern properties was added. A test with the command below gives a screen full of warnings like: arch/arm/boot/dts/rk3188-radxarock.dt.yaml: gpio-leds: 'blue', 'green', 'sleep' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' Fix these errors with help of the following rules: 1: Add nodename in the preferred form. 2: Always add a label that ends with '_led' to prevent conflicts with other labels such as 'power' and 'mmc' 3: If leds need pinctrl add a label that ends with '_led_pin' also to prevent conflicts with other labels. patternProperties: # The first form is preferred, but fall back to just 'led' # anywhere in the node name to at least catch some child nodes. "(^led-[0-9a-f]$|led)": make ARCH=arm dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/leds/ leds-gpio.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20200428144933.10953-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-03-17ARM: dts: rockchip: fix vref-supply for &saradc node rk3288 firefly reloadJohan Jonker1-0/+1
A test with the command below gives this error: arch/arm/boot/dts/rk3288-firefly-reload.dt.yaml: saradc@ff100000: 'vref-supply' is a required property PMIC Channel OUT11 with powername 'vcc_18' (connected through R155 bridge with 'vccio_wl') is used for the recovery key and ADC_AVDD_1V8. Fix error by adding 'vcc_18' as vref for the saradc. make ARCH=arm dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/iio/adc/ rockchip-saradc.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20200314140755.4877-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-04-11ARM: dts: rockchip: bulk convert gpios to their constant counterpartsHeiko Stuebner1-18/+18
Rockchip SoCs use 2 different numbering schemes. Where the gpio- controllers just count 0-31 for their 32 gpios, the underlying iomux controller splits these into 4 separate entities A-D. Device-schematics always use these iomux-values to identify pins, so to make mapping schematics to devicetree easier Andy Yan introduced named constants for the pins but so far we only used them on new additions. Using a sed-script created by Emil Renner Berthing bulk-convert the remaining raw gpio numbers into their descriptive counterparts and also gets rid of the unhelpful RK_FUNC_x -> x and RK_GPIOx -> x mappings: /rockchip,pins *=/bcheck b # to end of script :append-next-line N :check /^[^;]*$/bappend-next-line s/<RK_GPIO\([0-9]\) /<\1 /g s/<\([^ ][^ ]* *\)0 /<\1RK_PA0 /g s/<\([^ ][^ ]* *\)1 /<\1RK_PA1 /g s/<\([^ ][^ ]* *\)2 /<\1RK_PA2 /g s/<\([^ ][^ ]* *\)3 /<\1RK_PA3 /g s/<\([^ ][^ ]* *\)4 /<\1RK_PA4 /g s/<\([^ ][^ ]* *\)5 /<\1RK_PA5 /g s/<\([^ ][^ ]* *\)6 /<\1RK_PA6 /g s/<\([^ ][^ ]* *\)7 /<\1RK_PA7 /g s/<\([^ ][^ ]* *\)8 /<\1RK_PB0 /g s/<\([^ ][^ ]* *\)9 /<\1RK_PB1 /g s/<\([^ ][^ ]* *\)10 /<\1RK_PB2 /g s/<\([^ ][^ ]* *\)11 /<\1RK_PB3 /g s/<\([^ ][^ ]* *\)12 /<\1RK_PB4 /g s/<\([^ ][^ ]* *\)13 /<\1RK_PB5 /g s/<\([^ ][^ ]* *\)14 /<\1RK_PB6 /g s/<\([^ ][^ ]* *\)15 /<\1RK_PB7 /g s/<\([^ ][^ ]* *\)16 /<\1RK_PC0 /g s/<\([^ ][^ ]* *\)17 /<\1RK_PC1 /g s/<\([^ ][^ ]* *\)18 /<\1RK_PC2 /g s/<\([^ ][^ ]* *\)19 /<\1RK_PC3 /g s/<\([^ ][^ ]* *\)20 /<\1RK_PC4 /g s/<\([^ ][^ ]* *\)21 /<\1RK_PC5 /g s/<\([^ ][^ ]* *\)22 /<\1RK_PC6 /g s/<\([^ ][^ ]* *\)23 /<\1RK_PC7 /g s/<\([^ ][^ ]* *\)24 /<\1RK_PD0 /g s/<\([^ ][^ ]* *\)25 /<\1RK_PD1 /g s/<\([^ ][^ ]* *\)26 /<\1RK_PD2 /g s/<\([^ ][^ ]* *\)27 /<\1RK_PD3 /g s/<\([^ ][^ ]* *\)28 /<\1RK_PD4 /g s/<\([^ ][^ ]* *\)29 /<\1RK_PD5 /g s/<\([^ ][^ ]* *\)30 /<\1RK_PD6 /g s/<\([^ ][^ ]* *\)31 /<\1RK_PD7 /g s/<\([^ ][^ ]* *[^ ][^ ]* *\)0 /<\1RK_FUNC_GPIO /g s/<\([^ ][^ ]* *[^ ][^ ]* *\)RK_FUNC_\([1-9]\) /<\1\2 /g Suggested-by: Emil Renner Berthing <esmil@mailme.dk> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-01-28ARM: dts: rockchip: clean up the abuse of disable-wpShawn Lin1-1/+0
The mmc.txt didn't explicitly say disable-wp is for SD card slot only, but that is what it was designed for in the first place. Remove all disable-wp from emmc or sdio controller. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-06-17ARM: dts: rockchip: use SPDX-License-IdentifierKlaus Goger1-38/+1
Update all 32bit rockchip devicetree files to use SPDX-License-Identifiers. All files except rk3288-veyron-analog-audio.dtsi (which is GPL 2.0 only) claim to be GPL and X11 while the actual license text is MIT. Use the MIT SPDX tag for them. Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com> Acked-by: Brian Norris <briannorris@chromium.org> Acked-by: Matthias Brugger <mbrugger@suse.com> Acked-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-10-21ARM: dts: rockchip: enable the hdmi output on the rk3288-firefly-reloadHans Verkuil1-0/+11
The vdd10_lcd and vcc18_lcd regulators need to be enabled for HDMI output to work, so add 'regulator-always-on', just as is done in rk3288-firefly.dtsi. Also enable i2c5, the hdmi block and configure the correc cec pin. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-07-16ARM: dts: rockchip: remove num-slots from all platformsShawn Lin1-2/+0
We deprecated the "num-slots" property now and plan to get rid of it finally. Just move a step to cleanup it from DT. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-06-01ARM: dts: rockchip: add adc button for FireflyRandy Li1-0/+17
The only adc button connected to adc input is recovery button. Signed-off-by: Randy Li <ayaka@soulik.info> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-01-02ARM: dts: rockchip: use pin constants to describe gpiosAndy Yan1-13/+13
Use macros to describe gpios will make the dts easier to read and write. All the modifications done with sed: sed -i -e 's/ 0 GPIO_ACTIVE_/ RK_PA0 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* sed -i -e 's/ 1 GPIO_ACTIVE_/ RK_PA1 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* sed -i -e 's/ 2 GPIO_ACTIVE_/ RK_PA2 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* ....... ....... sed -i -e 's/ 30 GPIO_ACTIVE_/ RK_PD6 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* sed -i -e 's/ 31 GPIO_ACTIVE_/ RK_PD7 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* Tested with: for i in dts-old/*dtb; do scripts/dtc/dtx_diff $i dts-new/$(basename $i); done Signed-off-by: Andy Yan <andy.yan@rock-chips.com> [also adapted the gpio interrupts] Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-08-18ARM: dts: rockchip: add missing regulators for firefly reload boardRandy Li1-5/+57
There are many regulators are missed in previous commit, this commit complete most of them. It also fix some mistakes in the regulator properties. The VDD_10(REG10) and VCC_18(REG11) had better to keep in always-on state, as it is used as the USB PHY supply, corretly we have no way to assign power supply to a USB PHY. The VCCA_33(REG8) should be enabled or the GMAC won't work. It also fix the wrong properties for audio in io-domains, the supply connected to APIO4_VDD is different to firefly release version. Signed-off-by: Randy Li <ayaka@soulik.info> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-08-18ARM: dts: rockchip: remove excess sd properties from firefly reloadRandy Li1-5/+0
Because of a bug in hardware design, the sdcard at firefly rk3288 reload board can't switch the io voltage level to 1.8v. Signed-off-by: Randy Li <ayaka@soulik.info> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-08-08ARM: dts: rockchip: add rk3288-firefly-reloadRandy Li1-0/+356
The Firefly RK3288 Reload is a combination Firefly rk3288 core board with the Reload baseboard. Add a dtsi for the Firefly rk3288 core which can be included into the dts for the various baseboards in the future and dts for Reload base board. Currently supported are serial console, wired networking, eMMC and SD storage, SPFIF, IR receiver, LEDs, SDIO wifi and USB. But only the OTG could work on the host mode now, the other USB host can't work now, additional patches are required. Signed-off-by: Randy Li <ayaka@soulik.info> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>