summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/imx6ul.dtsi
AgeCommit message (Collapse)AuthorFilesLines
2019-06-24ARM: dts: imx6ul: fix PWM[1-4] interruptsSébastien Szymanski1-4/+4
According to the i.MX6UL/L RM, table 3.1 "ARM Cortex A7 domain interrupt summary", the interrupts for the PWM[1-4] go from 83 to 86. Fixes: b9901fe84f02 ("ARM: dts: imx6ul: add pwm[1-4] nodes") Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-04-11ARM: dts: imx6ul: Specify IMX6UL_CLK_IPG as "ipg" clock to SDMAAndrey Smirnov1-1/+1
Since 25aaa75df1e6 SDMA driver uses clock rates of "ipg" and "ahb" clock to determine if it needs to configure the IP block as operating at 1:1 or 1:2 clock ratio (ACR bit in SDMAARM_CONFIG). Specifying both clocks as IMX6UL_CLK_SDMA results in driver incorrectly thinking that ratio is 1:1 which results in broken SDMA funtionality. Fix the code to specify IMX6UL_CLK_IPG as "ipg" clock for SDMA, to avoid detecting incorrect clock ratio. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Angus Ainslie (Purism) <angus@akkea.ca> Cc: Chris Healy <cphealy@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-03-21ARM: dts: imx: make MMDC node name genericAnson Huang1-1/+1
Node name should be generic, so use "memory-controller" instead of "mmdc" for MMDC node name, also remove "mmdc" label for platforms with single MMDC node. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx6ul: Remove extra space between node name and braceLeonard Crestez1-1/+1
Fixes: 7d1cd2978664 ("ARM: dts: imx6ul: add gpmi support") Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx6ul: Add flexcan stop mode wakeup supportAisheng Dong1-0/+2
Add stop-mode property which is required by stop mode wakeup feature. Signed-off-by: Aisheng Dong <aisheng.dong@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx6ul: Correct mask for GIC PPI interruptsFabio Estevam1-5/+5
The GIC_CPU_MASK_SIMPLE() macro should take as its argument the actual number of CPU cores the interrupt controller is wired to. i.MX6UL contains a single Cortex-A7, hence the second interrupt specifier cell for Private Peripheral Interrupts should use "GIC_CPU_MASK_SIMPLE(1)". Tested on a imx6ul-evk. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx6ul: Fix memory node duplicationFabio Estevam1-2/+0
Boards based on imx6ul have duplicate memory nodes: - One coming from the board dts file: memory@ - One coming from the imx6ul.dtsi file. Fix the duplication by removing the memory node from the dtsi file and by adding 'device_type = "memory";' in the board dts. Reported-by: Rob Herring <robh@kernel.org> Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-11-05ARM: dts: imx6: add mmdc ipg clockAnson Huang1-0/+1
i.MX6 SoCs has MMDC clock gates in CCM CCGR, add clock property for MMDC driver's clock operation. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-26ARM: dts: imx6ul: use nvmem-cells for cpu speed gradingAnson Huang1-0/+6
On i.MX6UL, accessing OCOTP directly is wrong because the ocotp clock needs to be enabled first, so use the nvmem-cells binding instead. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-26ARM: dts: imx: Fix SPI bus warningsRob Herring1-5/+5
dtc has new checks for SPI buses. Fix the warnings in node names and unit-addresses. There's over 100 warnings for FSL boards, a few examples: arch/arm/boot/dts/imx28-duckbill-2-spi.dtb: Warning (spi_bus_bridge): /apb@80000000/apbh@80000000/ssp@80014000: node name for SPI buses should be 'spi' arch/arm/boot/dts/imx53-ppd.dtb: Warning (spi_bus_bridge): /soc/aips@50000000/spba@50000000/ecspi@50010000: node name for SPI buses should be 'spi' arch/arm/boot/dts/imx6dl-colibri-eval-v3.dtb: Warning (spi_bus_reg): /soc/aips-bus@2000000/spba-bus@2000000/spi@2014000/mcp251x@1: SPI bus unit address format error, expected "0" Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Li Yang <leoyang.li@nxp.com> Cc: Stefan Agner <stefan@agner.ch> Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-10ARM: dts: imx6ul: Enable the PMU nodeFabio Estevam1-1/+0
There is no need to keep the PMU disabled. Enable it like it is done in the other i.MX dtsi files. With this change applied we see: [ 1.338866] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-03ARM: dts: imx6ul: Add weim nodeSébastien Szymanski1-0/+11
Add weim node for i.MX6UL SOC. Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-07-22Merge tag 'imx-dt-4.19' of ↵Olof Johansson1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt i.MX device tree update for 4.19: - Add device tree support for i.MX6SLL SoC. - New board support: ConnectCore 6UL System-On-Module and SBC Express; ZII SCU2 Mezz, SCU3 ESB, SSMB SPU3 and CFU1 board; i.MX6SLL EVK board; Engicam i.CoreM6 1.5 Quad/Dual MIPI; LogicPD MX31Lite board; i.MX53 HSC/DDC boards from K+P. - Remove fake regulator bus container node and enable USB OTG support for i.MX6 wandboard and riotboard. - Populate RAVE SP EEPROM, backlight, power button and watchdog devices for ZII boards. - Add cooling-cells for cpufreq cooling device, and add OPP properties for all CPUs. - A series from Anson Huang to enable LCD panel and backlight support for imx6sll-evk board. - Make pfuze100 sw4 regulator always-on for for a few Freescale/NXP development boards, because the regulator is critical there and cannot be turned off. - Add more device support for i.MX5: AIPSTZ, SAHARA Crypto, M4IF, Tigerp, PMU, CodaHx4 VPU. - Enable PMU secure-reg-access for imx51-babbage, imx51-zii-rdu1 and imx53-ppd board. - Switch more device tree license to use SPDX identifier. - Switch to use OF graph to describe the display for imx7d-nitrogen7. - Add chosen/stdout-path for more boards, so that earlycon can be enabled more easily on kernel cmdline. - Convert GPC to new device tree bindings and add Vivante gpu nodes for i.MX6SL SoC. - Add more device support for imx6dl-mamoj board: parallel display, WiFi and USB. - A series from Stefan Agner to update i.MX6 apalis/colibri boards on various aspects: SD/MMC card detection, regulators, etc. * tag 'imx-dt-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (96 commits) ARM: dts: imx7d: remove "operating-points" property for cpu1 ARM: dts: vf610-zii-ssmb-spu3: Fix W=1 level warnings ARM: dts: vf610: Add ZII CFU1 board ARM: dts: imx6dl-mamoj: Add usb host and device support ARM: dts: imx6dl-mamoj: Add Wifi support ARM: dts: imx6dl-mamoj: Add parallel display support ARM: dts: vf610: Add ZII SSMB SPU3 board ARM: dts: imx6ul-pico-hobbit: Do not hardcode the memory size ARM: dts: imx6sl-evk: make pfuze100 sw4 always on ARM: dts: imx6sll-evk: make pfuze100 sw4 always on ARM: dts: imx6sx-sdb-reva: make pfuze100 sw4 always on ARM: dts: imx6qdl-sabresd: make pfuze100 sw4 always on ARM: dts: imx6sl-evk: add missing GPIO iomux setting ARM: dts: imx51-zii-scu3-esb: Fix RAVE SP watchdog compatible string ARM: dts: imx51-zii-scu3-esb: Add switch IRQ line pinumx config ARM: dts: imx6sx-nitrogen6sx: remove obsolete display configuration ARM: dts: imx7d-nitrogen7: use OF graph to describe the display ARM: dts: imx: Switch Boundary Devices boards to SPDX identifier ARM: dts: imx6sl: Add vivante gpu nodes ARM: dts: imx6sll-evk: enable SEIKO 43WVF1G lcdif panel ... Signed-off-by: Olof Johansson <olof@lixom.net>
2018-07-12ARM: dts: imx6ul: add GPIO clocksAnson Huang1-0/+5
i.MX6UL has GPIO clock gates in CCM CCGR, add clock property for GPIO driver to make sure all GPIO banks work as expected. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-06-28ARM: dts: imx: add cooling-cells for cpufreq cooling deviceAnson Huang1-0/+1
Add #cooling-cells for i.MX6/7 SoCs for cpufreq cooling device usage. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Bastian Stender <bst@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-05-20ARM: dts: imx6/7: Remove unit-address from anatop regulatorsFabio Estevam1-8/+3
Remove unit-address and reg property from anatop regulators to fix the following DTC warnings with W=1: arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (unique_unit_address): /soc/aips-bus@2000000/anatop@20c8000/regulator-vddcore@20c8140: duplicate unit-address (also used in node /soc/aips-bus@2000000/anatop@20c8000/regulator-vddpu@20c8140) arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (unique_unit_address): /soc/aips-bus@2000000/anatop@20c8000/regulator-vddcore@20c8140: duplicate unit-address (also used in node /soc/aips-bus@2000000/anatop@20c8000/regulator-vddsoc@20c8140) arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (unique_unit_address): /soc/aips-bus@2000000/anatop@20c8000/regulator-vddpu@20c8140: duplicate unit-address (also used in node /soc/aips-bus@2000000/anatop@20c8000/regulator-vddsoc@20c8140) Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-05-14ARM: dts: imx: Switch to SPDX identifierFabio Estevam1-7/+3
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-05-02ARM: dts: imx6ul: Add CAAM supportFabio Estevam1-0/+30
Add CAAM support on i.MX6UL. Also, since CAAM is not available on i.MX6ULL the CAAM node needs to be deleted in the imx6ull.dtsi. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-28ARM: dts: imx6ul: add wdog3 nodeJörg Krause1-0/+8
The i.MX6UL(L) has a WDOG3 located at start address 0x021E0000 in the AIPS-2 memory region [1]. [1] i.MX 6UltraLite Applications Processor Reference Manual, Rev. 1, 04/2016, Table-2-3 AIPS-2 memory map, p. 166 Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks> Reviewed-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-12ARM: dts: imx: Remove empty memory size nodesMarco Franchi1-1/+1
Remove the empty reg property from the SoC dtsi files in order to avoid duplicate memory nodes when the correct size is passed in board dts files. Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-12ARM: dts: imx6ul: add ARM architected timerStefan Agner1-0/+10
Add per-core ARM architected timer. Unfortunately bootloaders (U-Boot) currently do not make the necessary initialization. Also specifing the clock manually using the clock-frequency property seems not to help. Therefor leave the timer disabled by default for now. Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-12ARM: dts: imx6ul: add interrupt of virt-capable GICStefan Agner1-0/+2
The Cortex-A7 and its GIC support virtualization extensions. To make use of them the CPU private interrupt needs to be specified. Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-12ARM: dts: imx6ul: remove unnecessary clocks for cpu-freqAnson Huang1-7/+2
Remove unnecessary clocks for cpu-freq driver to avoid confusion. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-02Merge tag 'armsoc-dt' of ↵Linus Torvalds1-18/+31
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC device tree updates from Arnd Bergmann: "We get a moderate number of new machines this time, and only one new SoC variant (Actions S700): Actions: - S700 Soc and CubieBoard7 development board - Allo.com Sparky Single-board-computer Allwinner: - Orange Pi R1 development board - Libre Computer Board ALL-H3-CC H3 single-board computer ASpeed ast2x00: - Witherspoon: OpenPower Power9 server manufactured by IBM that uses the ASPEED ast2500 - Zaius: OpenPower Power9 server manufactured by Invatech that uses the ASPEED ast2500 - Q71L: Intel Xeon server manufactured by Qanta that uses the ASPEED ast2400 AT91: - Axentia Nattis/Natte digital signage - sama5d2 PTC-ek Evaluation board Freescale/NXP i.MX: - SolidRun Humminboard2 development board - Variscite DART-MX6 SoM and Carrier-board - Technologic TS-4600 and TS-7970 development board - Toradex Colibri iMX7D SoM board - v1.5 variant of Solidrun Cubox-i and Hummingboard Freescale/NXP Layerscape: - Moxa UC-8410A Series industrial computer Gemini: - D-Link DNS-313 NAS enclosure OMAP: - LogicPD OMAP35xx SOM-LV devkit - LogicPD OMAP35xx Torpedo devkit Renesas: - r8a77970 (V3M) Starter Kit board - r8a7795 (M3-W) Salvator-XS board We finally managed to get the dtc warnings under control, with no more build-time warnings for bad device tree files. This includes fixes for the majority of platforms, including nomadik, samsung, lpc32xx, STi, spear, mediatek, freescale, qcom, realview, keystone, omap, kirkwood, renesas, hisilicon, and broadcom. Files get rearranged on a few platforms, in particular the Marvell Armada 7K/8K device tree files are changed in preparation for future SoC support, based on more than two of the same chips in one package, and some boards get renamed for oxnas for consistency. Finally, many existing SoCs gain descriptions for additional on-chip devices that we can now support with kernel drivers: - Allwinner A83t (drm, ethernet, i2c, ...), H3/H5 (USB-OTG) - Amlogic AXG family (clk, pinctrl, pwm, ...), and others (vpu, hdmi) - Aspeed clk controller support - Freescale LS1088A, LS1021A device support - Gemini Ethernet, PCI, TVE, panel - Keystone gpio, qspi, more uarts - Mediatek cpufreq, regulator, clock, reset - Marvell thermal, cpufreq, nand - Renesas SMP, thermal, timer, PWM, sound, phy, ipmmu - Rockchip Mipi, GPU, display - Samsung Exynos5433 PMU, power domain, nfc - Spreadtrum: sc9860 clocks - Tegra TX2 PSDI, HDMI, I2C,SMMU, display, fuse, ..." * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (690 commits) arm64: dts: stratix10: fix SPI settings ARM: dts: socfpga: add i2c reset signals arm64: dts: stratix10: add USB ECC reset bit arm64: dts: stratix10: enable USB on the devkit ARM: dts: socfpga: disable over-current for Arria10 USB devkit ARM: dts: Nokia N9: add support for up/down keys in the dts ARM: dts: nomadik: add interrupt-parent for clcd ARM: dts: Add ethernet to a bunch of platforms ARM: dts: Add ethernet to the Gemini SoC ARM: dts: rename oxnas dts files ARM: dts: s5pv210: add interrupt-parent for ohci ARM: lpc3250: fix uda1380 gpio numbers ARM: dts: STi: Add gpio polarity for "hdmi,hpd-gpio" property ARM: dts: dra7: Reduce shut down temperature of non-cpu thermal zones ARM: dts: n900: Add aliases for lcd and tvout displays ARM: dts: Update ti-sysc data for existing users ARM: dts: Fix smartreflex compatible for omap3 shared mpu-iva instance arm64: dts: marvell: armada-80x0: Fix pinctrl compatible string arm: spear13xx: Fix spics gpio controller's warning arm: spear13xx: Fix dmas cells ...
2018-01-10ARM: dts: imx6ul: add 696MHz operating pointAnson Huang1-0/+2
Add 696MHz operating point according to datasheet (Rev. 0, 12/2015). Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-12-26ARM: dts: imx6: Add unit address and reg for the anatop nodesFabio Estevam1-3/+8
Add unit address and reg for the anatop nodes in order to fix the following build warnings with W=1: arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (simple_bus_reg): Node /soc/aips-bus@2000000/anatop@20c8000/regulator-1p1 missing or empty reg/ranges property arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (simple_bus_reg): Node /soc/aips-bus@2000000/anatop@20c8000/regulator-3p0 missing or empty reg/ranges property arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (simple_bus_reg): Node /soc/aips-bus@2000000/anatop@20c8000/regulator-2p5 missing or empty reg/ranges property arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (simple_bus_reg): Node /soc/aips-bus@2000000/anatop@20c8000/regulator-vddcore missing or empty reg/ranges property arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (simple_bus_reg): Node /soc/aips-bus@2000000/anatop@20c8000/regulator-vddpu missing or empty reg/ranges property arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (simple_bus_reg): Node /soc/aips-bus@2000000/anatop@20c8000/regulator-vddsoc missing or empty reg/ranges property Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6: Move nodes which have no reg property out of busFabio Estevam1-15/+17
Move tempmon, ldb and pmu nodes from soc node to root node. The nodes that have been moved do not have any register properties and thus shouldn't be placed on the bus. This fixes the following build warnings with W=1: arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (simple_bus_reg): Node /soc/aips-bus@2000000/tempmon missing or empty reg/ranges property arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (simple_bus_reg): Node /soc/aips-bus@2000000/ldb missing or empty reg/ranges property arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (simple_bus_reg): Node /soc/pmu missing or empty reg/ranges property Based on a patch from Simon Horman for r8a7795.dtsi. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6: add snvs-lpgpr nodeOleksij Rempel1-0/+4
This node is for Low Power General Purpose Register which can be used as Non-Volatile Storage. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx: name the interrupts for the fec ethernet driverTroy Kisky1-0/+2
imx7s/imx7d has the ptp interrupt newly added as well. For imx7, "int0" is the interrupt for queue 0 and ENET_MII "int1" is for queue 1 "int2" is for queue 2 For imx6sx, "int0" handles all 3 queues and ENET_MII And of course, the "pps" interrupt is for the PTP_CLOCK_PPS interrupts This will help document what each interrupt does. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-10-23ARM: dts: imx6ul: Add imx6ul-tempmonLeonard Crestez1-0/+19
This works identically to imx6sx-tempmon on both imx6ul and imx6ull. It just needs to be defined in dts. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-10-13ARM: dts: imx6ul: Remove leading zeroes from unit addressesMarco Franchi1-71/+71
The following build warnings are seen with W=1: Warning (unit_address_format): Node /interrupt-controller@00a01000 unit name should not have leading 0s Warning (simple_bus_reg): Node /soc/sram@00900000 simple-bus unit address format error, expected "900000" Warning (simple_bus_reg): Node /soc/dma-apbh@01804000 simple-bus unit address format error, expected "1804000" (...) Remove the leading zeroes from unit addresses to fix the warnings. Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-07-16ARM: dts: imx: update snvs-poweroff maskGuy Shapiro1-0/+1
Make the syscon-poweroff driver change only the shutdown bits on the SNVS_LP control register. This change fixes an issue with the RTC wakeup alarm, that was previously disabled during power off. Signed-off-by: Guy Shapiro <guy.shapiro@mobi-wize.com> Reviewed-by: Marcin Niestroj <m.niestroj@grinn-global.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-05-21ARM: dts: imx: Reintroduce 'anatop-enable-bit' where appropriateAndrey Smirnov1-0/+1
Now that support for 'anatop-enable-bit' has been added to ANADIG driver, reintroduce 'anatop-enable-bit' for all applicable LDOs. Cc: yurovsky@gmail.com Cc: Dong Aisheng <aisheng.dong@nxp.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Russell King <linux@armlinux.org.uk> Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-02-24Merge tag 'armsoc-dt' of ↵Linus Torvalds1-3/+8
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM DT updates from Arnd Bergmann: "A total of 380 patches this time, mostly adding support for more hardware in the device tree descriptions. There is not much exciting here for 4.11, but I've tried my best to condense the information from the pull requests I got into a readable summary. Noteworthy changes to existing platforms include: - The GIC memory map was a bit wrong almost everywhere and now gets fixed up - The Allwinner platforms convert to the generic pinmux properties - The Marvell EBU platforms now use the new DSA binding - Samsung Exynos4212 was unused and gets removed - The Renesas power management got improved New production machines: - Lego Mindstorms EV3: https://www.lego.com/en-us/mindstorms/about-ev3 - Beelink X2 Android media box: http://linux-sunxi.org/Beelink_X2 - "Romulus" baseboard management controller for OpenPower - Axentia TSE-850 Data Radio Channel (DARC) encoder: http://www.axentia.se/db/equipment.html - Luxul XAP-1410 and XWR-1200 wireless access points: https://luxul.com/xap-1410 New SoCs: - Allwinner H2+ and V3s, both minor variations of already supported chips: http://www.allwinnertech.com/index.php?c=product&a=index&id=38 - Marvell Prestera DX packet processors based on Armada XP architecture: http://www.marvell.com/switching/prestera-dx/ - Samsung Exynos4412 Prime gets added, a minor variation of Exynos4412 New developer and reference boards: - Lichee Pi One, Lichee Pi Zero and Orange Pi Zero, all based on Allwinner SoCs: http://linux-sunxi.org/LicheePi_One http://www.orangepi.org/orangepizero/ - SAMA5d36ek Reference platform: http://www.atmel.com/tools/sama5d36-ek.aspx - Beaglebone Green Wireless and Black Wireless: https://beagleboard.org/black-wireless https://beagleboard.org/green-wireless - phyCORE-AM335x System on Module: http://phytec.com/products/system-on-modules/phycore/am335x/ - New revision of "vf610-zii" Zodiac Inflight Innovations board - Various i.MX System-on-Module: Is.IoT MX6UL, SavageBoard, Engicam i.Core: http://www.opossom.com/english/index.html http://www.savageboard.org/ http://www.engicam.com/en/products/embedded/som/sodimm/is-iot-mx6ul http://www.engicam.com/en/products/embedded/som/sodimm/i-core-m6s-dl-d-q - Liebherr (LWN) monitor 6 based on i.MX6 Quad, no idea what this is - Cleanups and bugfixes on at91, bcm53xx, i.MX, mvebu, omap, oxnas, qcom, rockchip, sti, stm32 and tegra New device supports added to some boards and SoCs, briefly by platform: - Allwinner: SPDIF, A33 cpufreq, A33 Mali GPU - Aspeed: network, ipmi bt, gpio, pinmux - Broadcom: video encoder for raspberry pi, qspi, ethernet, sd/mmc - TI DaVinci: gpio, lcdc, usb, video-in, uart - TI Keystone 2: MSM RAM, power/reset, uart - Mediatek MT2701: clocks, iommu, spi, nand, adc, thermal - Marvell EBU: ethernet switch on Turris Omnia - NXP i.MX: otp ram, USB, wifi, bluetooth, spdif, spi, pmic, eeprom, mmc, nand - TI OMAP: - Qualcomm: coresight, gyro/accelerometer, hdmi - Renesas: pmic, soc-id - Rockchip: qos - Samsung: audio on Odroid-X - Socfpga: FPGA manager, i2c, led, can, watchdog, nand, power monitor - STi: video in/out - STM32: timer, pwm, i2c, rtc, add, i2s - NVIDIA Tegra: tpm - Uniphier: mmc/sd pinmux" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (380 commits) ARM: dts: armada-385-linksys: fix DSA compatible property ARM: dts: Fix typo in armada-xp-98dx4251 ARM: DTS: Fix register map for virt-capable GIC dt-bindings: arm,gic: Fix binding example for a virt-capable GIC ARM: dts: sun8i: sinlinx: Enable audio nodes ARM: dts: sun8i: parrot: Enable audio nodes ARM: dts: sun8i: Add audio codec, dai and card for A33 ARM: dts: Add EMAC AXI settings for Arria10 ARM: dts: am335x-chiliboard: Support charger ARM: dts: am335x-chiliboard: Support power button ARM: sun8i: dt: Add mali node dt-bindings: gpu: Add Mali Utgard bindings ARM: dts: stm32: Add I2C1 support for STM32429 eval board ARM: dts: stm32: Add I2C1 support for STM32F429 SoC ARM: dts: stm32: Use clock DT binding definition on stm32f429 family dt-bindings: mfd: stm32f4: Add missing binding definition dt-bindings: mfd: stm32f4: Fix STM32F4_X_CLOCK() macro ARM: dts: stm32: Enable pwm1 and pwm3 for stm32f469-disco ARM: dts: stm32: add Timers driver for stm32f429 MCU ARM: dts: add the AB8500 sysclk to the device trees ...
2017-02-07ARM: DTS: Fix register map for virt-capable GICMarc Zyngier1-2/+2
Since everybody copied my own mistake from the DT binding example, let's address all the offenders in one swift go. Most of them got the CPU interface size wrong (4kB, while it should be 8kB), except for both keystone platforms which got the control interface wrong (4kB instead of 8kB). In a few cases where I knew for sure what implementation was used, I've added the "arm,gic-400" compatible string. I'm 99% sure that this is what everyone is using, but short of having the TRM for all the other SoCs, I've left them alone. Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Antoine Tenart <antoine.tenart@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-01-24ARM: dts: imx: Pass 'chosen' and 'memory' nodesFabio Estevam1-0/+8
Commit 7f107887d199 ("ARM: dts: imx: Remove skeleton.dtsi") causes boot issues when the bootloader does not create a 'chosen' node if such node is not present in the dtb. The reason for the boot failure is well explained by Javier Martinez Canillas: "the decompressor relies on a pre-existing chosen node to be available to insert the command line and merge other ATAGS info." , so pass an empty 'chosen' node to fix the boot problem. This issue has been seen in the kernelci reports with Barebox as bootloader. Also pass the 'memory' node in order to fix boot issues on the SolidRun iMX6 platforms. Fixes: 7f107887d199 ("ARM: dts: imx: Remove skeleton.dtsi") Reported-by: kernelci.org bot <bot@kernelci.org> Reported-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-10ARM: dts: imx: Add ocotp node for imx6ulBai Ping1-0/+6
Add ocotp node for i.MX6UL SOC. Signed-off-by: Bai Ping <ping.bai@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-03ARM: dts: imx: Remove unexistant propertyFabio Estevam1-1/+0
Property 'anatop-enable-bit' does not exist, so just remove it. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-11-14ARM: dts: imx: Remove skeleton.dtsiFabio Estevam1-1/+3
As explained by commit 9c0da3cc61f1233c ("ARM: dts: explicitly mark skeleton.dtsi as deprecated"), including skeleton.dtsi is deprecated. This fixes the following warning with W=1: Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-09-09ARM: dts: add gpio-ranges property to iMX GPIO controllersVladimir Zapolskiy1-0/+6
To establish a connection between GPIO controllers and pin multiplexor controller add gpio-ranges properties to all GPIO controllers found on iMX50, iMX6Q/D, iMX6DL/S, iMX6SL, iMX6SX, iMX6UL and iMX7D/S SoCs. The change was done after human parsing of output from % gawk -n '{ sub(/.*__/, ""); if ($1 ~ "^GPIO") print $1, $2/4}' imxXX-pinfunc.h | sort -n Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-08-29ARM: dts: imx6ul iomuxc syscon is compatible to imx6qAnson Huang1-1/+2
The imx6ul iomuxc syscon is compatible to imx6q, so let's add compatible string 'fsl,imx6q-iomuxc-gpr' for imx6ul iomuxc syscon node. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-06ARM: dts: imx6ul: Add SAI aliasFabio Estevam1-0/+3
Add SAI alias entries, which makes it possibe for the SAI driver to retrieve the port instance. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-06ARM: dts: imx: Remove unneeded unit-addressesFabio Estevam1-3/+3
Building with W=1 option leads to several warnings like: Warning (unit_address_vs_reg): Node /soc/aips-bus@02000000/anatop@020c8000/regulator-1p1@110 has a unit name, but no reg property Fix them by removing the unneeded unit-addresses. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-26ARM: dts: imx6ul: Fix operating pointsFabio Estevam1-6/+6
Adjust the VDD_ARM_CAP and VDD_SOC_CAP voltages according to Table-11 from MX6UL datasheet: http://cache.nxp.com/files/32bit/doc/data_sheet/IMX6ULCEC.pdf (a 25mV offset is added to the minimum allowed values for safety). Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-02-29ARM: dts: imx6ul: add kpp supportLothar Waßmann1-0/+8
This patch adds the device node for the i.MX6UL keypad controller. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-02-29ARM: dts: imx6ul: add gpmi supportLothar Waßmann1-0/+33
Add the device node for the i.MX6UL GPMI interface and the related APBH DMA which is necessary for the GPMI to work properly. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-02-29ARM: dts: imx6ul: add lcdif supportLothar Waßmann1-0/+11
Add the device node for the i.MX6UL eLCDIF interface. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-02-29ARM: dts: imx6ul: add sai supportLothar Waßmann1-0/+45
Add device nodes for the i.MX6UL synchronous audio interfaces (SAI). Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-02-29ARM: dts: imx6ul: add flexcan supportLothar Waßmann1-0/+20
Add device nodes for the i.MX6UL flexcan interfaces. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-02-29ARM: dts: imx6ul: add sdma supportLothar Waßmann1-0/+12
Add device node for the i.MX6UL SDMA unit. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-02 17:34:54 +0300