summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/imx6sl.dtsi
AgeCommit message (Expand)AuthorFilesLines
2019-07-23ARM: dts: imx6sl: move GIC to right location in DTAnson Huang1-9/+9
2019-05-20ARM: dts: imx6sl-evk: Assign corresponding power supply for LDOsAnson Huang1-3/+3
2019-05-20ARM: dts: imx6sl: Assign corresponding clocks instead of dummy clockAnson Huang1-3/+3
2019-04-11ARM: dts: imx6sx: Specify IMX6SX_CLK_IPG as "ahb" clock to SDMAAndrey Smirnov1-1/+1
2019-03-22ARM: dts: i.MX6SL: Add i2c and mmc aliasesAlexander Kurz1-0/+7
2019-03-21ARM: dts: imx: make MMDC node name genericAnson Huang1-1/+1
2019-01-11ARM: dts: imx6sl: correct PWM ipg clock sourceAnson Huang1-4/+4
2018-12-10ARM: dts: imx6sl: Fix memory node duplicationFabio Estevam1-2/+0
2018-12-10ARM: dts: imx: Add dummy PHYs for HSIC-only USB controllersFrieder Schrempf1-0/+7
2018-12-10ARM: dts: imx6sl: vddpu is NOT an always-on regulatorAnson Huang1-1/+0
2018-11-05ARM: dts: imx6: add mmdc ipg clockAnson Huang1-0/+1
2018-09-26ARM: dts: imx: Fix SPI bus warningsRob Herring1-4/+4
2018-07-17ARM: dts: imx6sl: Add vivante gpu nodesLeonard Crestez1-0/+20
2018-07-11ARM: dts: imx6sl: Convert gpc to new bindingsLeonard Crestez1-4/+31
2018-07-03ARM: dts: imx6: correct anatop regulators rangeAnson Huang1-4/+4
2018-06-28ARM: dts: imx: add cooling-cells for cpufreq cooling deviceAnson Huang1-0/+1
2018-05-20ARM: dts: imx6/7: Remove unit-address from anatop regulatorsFabio Estevam1-14/+6
2018-05-14ARM: dts: imx: Switch to SPDX identifierFabio Estevam1-8/+3
2018-05-14ARM: dts: imx: drop unnecessary #address-cells/#size-cellsShawn Guo1-3/+0
2018-02-12ARM: dts: imx: Remove empty memory size nodesMarco Franchi1-1/+1
2017-12-26ARM: dts: imx6: Add unit address and reg for the anatop nodesFabio Estevam1-6/+14
2017-12-26ARM: dts: imx6: Move nodes which have no reg property out of busFabio Estevam1-13/+15
2017-10-20arm: dts: fix unit-address leading 0sRob Herring1-67/+67
2017-07-16ARM: dts: imx: update snvs-poweroff maskGuy Shapiro1-0/+1
2017-05-21ARM: dts: imx: Reintroduce 'anatop-enable-bit' where appropriateAndrey Smirnov1-0/+3
2017-01-24ARM: dts: imx: Pass 'chosen' and 'memory' nodesFabio Estevam1-0/+8
2017-01-03ARM: dts: imx6: Disable "weim" node in the dtsi filesFabio Estevam1-0/+1
2016-11-14ARM: dts: imx: Remove skeleton.dtsiFabio Estevam1-1/+3
2016-11-05ARM: dts: imx6: Add imx-weim parameters to dtsi'sJoshua Clayton1-0/+3
2016-09-09ARM: dts: add gpio-ranges property to iMX GPIO controllersVladimir Zapolskiy1-0/+47
2016-06-06ARM: dts: imx: Remove unneeded unit-addressesFabio Estevam1-6/+6
2016-06-06ARM: dts: imx6sl: add clocks property for ocotp nodePeng Fan1-0/+1
2015-12-22ARM: dts: imx6: Change the clock name for spba clockShengjiu Wang1-1/+1
2015-12-22ARM: dts: imx6: change default burst size for USBPeter Chen1-0/+6
2015-12-22ARM: dts: imx6: set ahb-burst-config as 0 for USBPeter Chen1-0/+3
2015-10-19ARM: dts: imx6: change the core clock of spdifShengjiu Wang1-0/+16
2015-10-19ARM: dts: imx6sl: Complete the dcp nodeFabio Estevam1-1/+4
2015-08-11ARM: dts: imx: update snvs to use syscon access registerFrank Li1-10/+11
2015-03-30ARM: dts: imx6sl: Add label snvs_rtcFabio Estevam1-1/+1
2015-03-30ARM: dts: imx6sl: Add power-domain information to gpc nodePhilipp Zabel1-0/+4
2015-03-30ARM: dts: imx: Add dr_mode host setting to all host-only usb instancesMatt Porter1-0/+1
2015-03-30ARM: imx6: convert GPC to stacked domainsMarc Zyngier1-1/+5
2014-11-23ARM: dts: imx6: add pm_power_off support for i.mx6 chipsRobin Gong1-0/+6
2014-09-16ARM: dts: imx6sl: add baud clock and clock-names for ssiShengjiu Wang1-3/+9
2014-09-16ARM: dts: imx6sl-evk: Add LCD supportFabio Estevam1-0/+6
2014-09-16ARM: i.MX: dts: Add simple-card supportAlexander Shiyan1-0/+3
2014-09-16ARM: dts: add thermal sensor support for i.mx6slAnson Huang1-1/+9
2014-07-18ARM: imx6: Align ssi nodes between mx6 variantsFabio Estevam1-6/+3
2014-07-18ARM: dts: imx: correct sdma compatbile for imx6sl and imx6sxShawn Guo1-1/+1
2014-07-18ARM: dts: mx6: Disable the keypad in the dtsi filesFabio Estevam1-0/+1