summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/exynos4.dtsi
AgeCommit message (Collapse)AuthorFilesLines
2020-11-10ARM: dts: exynos: use hyphens in Exynos4 node namesKrzysztof Kozlowski1-13/+13
Use hyphens instead of underscores in the Exynos4210 and Exynos4412 node names which is expected by naming convention, multiple dtschema files and pointed out by dtc W=2 builds. Use also generic "ppmu" node name for PPMU nodes to match Devicetree specification. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201105184506.215648-2-krzk@kernel.org
2020-07-07ARM: dts: exynos: Remove DMA controller bus node name to fix dtschema warningsKrzysztof Kozlowski1-39/+31
There is no need to keep DMA controller nodes under AMBA bus node. Remove the "amba" node to fix dtschema warnings like: amba: $nodename:0: 'amba' does not match '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
2019-10-06ARM: dts: exynos: Rename power domain nodes to "power-domain" in Exynos4Krzysztof Kozlowski1-7/+7
The device node name should reflect generic class of a device so rename power domain nodes to "power-domain". No functional change. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-07-30ARM: dts: exynos: Use standard arrays of generic PHYs for EHCI/OHCI devicesMarek Szyprowski1-24/+4
Move USB PHYs to a standard arrays for Exynos EHCI/OHCI devices. This resolves the conflict between Exynos EHCI/OHCI sub-nodes and generic USB device bindings. Once the Exynos EHCI/OHCI sub-nodes are removed, the boards can finally provide sub-nodes for the USB devices using generic USB device bindings. Suggested-by: Måns Rullgård <mans@mansr.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20190726081453.9456-4-m.szyprowski@samsung.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-01ARM: dts: exynos: Move Mali400 GPU node to "/soc"Marek Szyprowski1-14/+14
Mali400 GPU hardware module is a standard hardware module integrated to Exynos3210/4210/4412 SoCs, so it should reside under the "/soc" node. The only SoC components which are placed in the DT root, are those, which are a part of CPUs: like ARM architected timers and ARM performance measurement units. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-07-01ARM: dts: exynos: Fix imprecise abort on Mali GPU probe on Exynos4210Marek Szyprowski1-22/+0
The PMU module of Mali400 GPU is optional and it looks that it is not present on Exynos4210, because any access to its registers causes external abort. This patch removes "pmu" interrupt for Exynos4210 SoCs, so the driver will skip the PMU module. This fixes following fault during kernel boot: Unhandled fault: imprecise external abort (0x1406) at 0x00000000 (lima_pmu_init) from [<c059e6f8>] (lima_device_init+0x244/0x5a0) (lima_device_init) from [<c059e40c>] (lima_pdev_probe+0x7c/0xd8) (lima_pdev_probe) from [<c05afcb8>] (platform_drv_probe+0x48/0x9c) (platform_drv_probe) from [<c05ad594>] (really_probe+0x1c4/0x400) (really_probe) from [<c05ad988>] (driver_probe_device+0x78/0x1b8) (driver_probe_device) from [<c05add30>] (device_driver_attach+0x58/0x60) (device_driver_attach) from [<c05ade34>] (__driver_attach+0xfc/0x160) (__driver_attach) from [<c05ab650>] (bus_for_each_dev+0x68/0xb4) (bus_for_each_dev) from [<c05ac734>] (bus_add_driver+0x104/0x20c) (bus_add_driver) from [<c05aece0>] (driver_register+0x78/0x10c) (driver_register) from [<c0103214>] (do_one_initcall+0x8c/0x430) (do_one_initcall) from [<c0f01328>] (kernel_init_freeable+0x3c8/0x4d0) (kernel_init_freeable) from [<c0ac3aa0>] (kernel_init+0x8/0x10c) (kernel_init) from [<c01010b4>] (ret_from_fork+0x14/0x20) The PMU module seems to work fine on Exynos4412 SoCs, so the patch also moves the interrupt definitions to exynos4210.dtsi and exynos4412.dtsi respectively, to keep only the common part in exynos4.dtsi. Fixes: 13efd80acaa4 ("ARM: dts: exynos: Add GPU/Mali 400 node to Exynos4") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-06-24ARM: dts: exynos: Add GPU/Mali 400 node to Exynos4Krzysztof Kozlowski1-0/+36
Add nodes for GPU (Mali 400) to Exynos4210 and Exynos4412. Describe the GPU as much as possible however still few elements are missing: 1. Exynos4210 bus clock is not described in hardware manual therefore the IP gate clock was provided, 2. Exynos4412: Not sure what to do with CLK_G3D clock responsible for gating entire IP block (it is now being disabled as unused), 3. Regulator supplies on Trats board. Limited testing on Odroid U3 (Exynos4412). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-06-19ARM: dts: exynos: Add PMU interrupt affinity to Exynos4 boardsKrzysztof Kozlowski1-1/+1
Move SoC-specific PMU properties from exynos4.dtsi to respective SoC (4210 or 4412) so common DTSI would have only common properties. Define there also interrupt affinity to remove the boot warning message: hw perfevents: no interrupt-affinity property for /pmu, guessing. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-04-24ARM: dts: exynos: Properly override node to use MDMA0 on Universal C210Krzysztof Kozlowski1-1/+1
The Universal C210 (Exynos4210) uses the secure interface of MDMA0, instead of regular one - non-secure MDMA1. DTS was overriding MDMA1 node address which caused DTC W=1 warning: arch/arm/boot/dts/exynos4.dtsi:707.25-716.6: Warning (simple_bus_reg): /soc/amba/mdma@12850000: simple-bus unit address format error, expected "12840000" Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-04-24ARM: dts: exynos: Move pmu and timer nodes out of socKrzysztof Kozlowski1-6/+6
The ARM PMU and ARM architected timer nodes are part of ARM CPU design therefore they should not be inside the soc node. This also fixes DTC W=1 warnings like: arch/arm/boot/dts/exynos3250.dtsi:106.21-135.5: Warning (simple_bus_reg): /soc/fixed-rate-clocks: missing or empty reg/ranges property arch/arm/boot/dts/exynos3250.dtsi:676.7-680.5: Warning (simple_bus_reg): /soc/pmu: missing or empty reg/ranges property Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
2018-06-25ARM: dts: exynos: remove no longer needed samsung thermal propertiesBartlomiej Zolnierkiewicz1-1/+1
Remove no longer needed samsung thermal properties. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-04-21ARM: dts: exynos: Move syscon poweroff and restart nodes under the PMUKrzysztof Kozlowski1-1/+2
The PMU node is the actual block responsible for power management, including typical Exynos on/off/restart procedures. Therefore the syscon poweroff and restart nodes logically belong to it. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
2018-02-26ARM: dts: exynos: Fix address of PPMU ACP on Exynos4210Krzysztof Kozlowski1-6/+0
Typo in unit address of PPMU ACP caused DTC warnings: arch/arm/boot/dts/exynos4412-odroidu3.dtb: Warning (simple_bus_reg): Node /soc/ppmu_acp@10ae0000 simple-bus unit address format error, expected "106e0000" PPMU ACP (under 0x10ae0000 address) is present only in Exynos4210 so move this node to exynos4210.dtsi with fixing the reg address to proper one. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
2018-02-13ARM: dts: exynos: Add soc node to exynos4Maciej Purski1-855/+872
Soc nodes are used in other exynos DTS. Exynos4 boards should use them as well. Signed-off-by: Maciej Purski <m.purski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-02-13ARM: dts: exynos: Use pmu label in exynos4412Maciej Purski1-1/+1
In order to use soc node, we need to reference soc child nodes by label in exynos4412. Define pmu label in exynos4.dtsi. Use it in exynos4412 instead of redefining the node by full path. Signed-off-by: Maciej Purski <m.purski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-02-13ARM: dts: exynos: Use labels instead of full paths in exynos4210Maciej Purski1-1/+5
Extend camera, mixer and tmu nodes by labels, not by full path in Exynos 4210 DTSI. This avoids error-prone redefinition of nodes. Signed-off-by: Maciej Purski <m.purski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-01-03ARM: dts: exynos: Add SPDX license identifiersKrzysztof Kozlowski1-4/+1
Replace GPL v2.0 license statements with SPDX license identifiers. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-12-18ARM: dts: exynos: Use lower case hex addresses in node unit addressesKrzysztof Kozlowski1-28/+28
Convert all hex addresses in node unit addresses to lower case to fix warnings like: arch/arm/boot/dts/exynos5422-odroidhc1.dtb: Warning (simple_bus_reg): Node /soc/nocp@10CA1000 simple-bus unit address format error, expected "10ca1000" Conversion was done using sed: $ sed -e 's/@\([a-zA-Z0-9_-]*\) {/@\L\1 {/' -i arch/arm/boot/dts/exynos*.dts* Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-11-27ARM: dts: exynos: Switch to dedicated Odroid XU3 sound card bindingSylwester Nawrocki1-0/+1
The new sound card DT binding is used for Odroid XU3 in order to properly support the HDMI audio path. Clocks configuration is changed so the I2S controller is now the bit clock and the frame clock master. The EPLL output clock is now the audio root clock adjusted to each audio sample rate. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-10-20arm: dts: fix unit-address leading 0sRob Herring1-2/+2
Fix dtc warnings for 'simple_bus_reg' due to leading 0s. Converted using the following command: perl -p -i -e 's/\@0+([0-9a-f])/\@$1/g' `find arch/arm/boot/dts -type -f -name '*.dts*' Dropped changes to ARM, Ltd. boards LED nodes and manually fixed up some occurrences of uppercase hex. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-07-27ARM: dts: exynos: Add clocks to audss block to fix silent hang on Exynos4412Krzysztof Kozlowski1-0/+3
Add necessary parent clocks for audss (Audio SubSystem, MAUDIO) clock controller block. This allows driver to keep EPLL enabled before accessing any MAUDIO registers thus fixing silent hang. This silent hang appeared with commit 6edfa11cb396 ("clk: samsung: Add enable/disable operation for PLL36XX clocks"), e.g. on Odroid U3 usually with last (but unrelated) messages: [ 2.382741] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 2.405686] usb 1-3: new high-speed USB device number 3 using exynos-ehci [ 2.419843] max77686-rtc max77686-rtc: setting system clock to 2017-06-21 17:04:13 UTC (1498064653) Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-03-31Merge tag 'samsung-dt-hdmi-cec-4.12' into next/dtKrzysztof Kozlowski1-0/+1
Add to hdmi-cec node a phandle to hdmi node for new hdmi-cec notifier.
2017-03-31ARM: dts: exynos: add HDMI controller phandle to exynos4.dtsiHans Verkuil1-0/+1
Add the new hdmi phandle to exynos4.dtsi. This phandle is needed by the s5p-cec driver to initialize the CEC notifier framework. Tested with my Odroid U3. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-03-13ARM: dts: exynos: Fix watchdog reset on Exynos4412Krzysztof Kozlowski1-9/+0
The Exynos4412 has the same watchdog as newer SoCs (e.g. Exynos5250). Just like the others, for working it requires additional steps in Power Management Unit: unmasking the reset request and enabling the system reset. Without these additional steps in PMU, the watchdog will not be able to reset the system on expiration event. Change the compatible of Exynos4412 watchdog device node to samsung,exynos5250-wdt which includes the additional PMU steps. This will also fix infinite watchdog interrupt in soft mode (lack of interrupt clear) because it is also included in samsung,exynos5250-wdt. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Guenter Roeck <linux@roeck-us.net>
2017-01-31ARM: dts: exynos: Add labels to all existing power domainsMarek Szyprowski1-0/+7
Provide human readable names for all power domains defined in Exynos SoCs. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-01-29ARM: dts: exynos: Fix indentation of EHCI and OHCI portsKrzysztof Kozlowski1-12/+12
Replace spaces with tabs in EHCI and OHCI ports indentation. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-12-28ARM: dts: exynos: Correct clocks for Exynos4 I2S moduleMarek Szyprowski1-2/+4
"iis", "i2s_opclk0" and "i2s_opclk1" are standard clocks for Exynos4 I2S hardware module, so they should be defined in .dtsi file not in the random board .dts file. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2016-11-19Merge tag 'samsung-dt-gic-flags-4.10' of ↵Olof Johansson1-44/+51
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt Topic branch with DT changes for v4.10. Fix invalid GIC interrupt flags - type IRQ_TYPE_NONE is not allowed for GIC interrupts. Although this was working but with error messages like: genirq: Setting trigger mode 0 for irq 16 failed Use level high interrupt instead of type none. The choice of level high was rather an arbitrary decision hoping it will work on each platform. Tests shown no issues so far. * tag 'samsung-dt-gic-flags-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos5440 ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos5260 ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos5 ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos4 ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos3250 ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5440 ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5260 ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5410/exynos542x ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5250 ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5 ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos3250 ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4x12 ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4210 ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4 Signed-off-by: Olof Johansson <olof@lixom.net>
2016-11-05ARM: dts: exynos: Add SCU device node to exynos4.dtsiPankaj Dubey1-0/+5
Exynos4 like other Cortex-A9 SoC's has a Snoop Control Unit(SCU) and its SFR are used during SMP boot and S2R. Add SCU node to the device tree. Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2016-11-03ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos4Krzysztof Kozlowski1-49/+50
Replace hard-coded values of type of GIC interrupt and its flags with respective macros from header to increase code readability. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2016-11-03ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4Krzysztof Kozlowski1-44/+50
Interrupt of type IRQ_TYPE_NONE is not allowed for GIC interrupts and generates an error: genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68) The GIC requires shared interrupts to be edge rising or level high. Platform declares support for both. Arbitrarily choose level high everywhere hoping it will work on each platform. Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Reported-by: Alban Browaeys <alban.browaeys@gmail.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
2016-09-01ARM: dts: exynos: Remove skeleton.dtsi usage for Exynos4Javier Martinez Canillas1-1/+2
The skeleton.dtsi file was removed in ARM64 for different reasons as explained in commit ("3ebee5a2e141 arm64: dts: kill skeleton.dtsi"). These also applies to ARM and it will also allow to get rid of the following DTC warnings in the future: "Node /memory has a reg or ranges property, but no unit name" The disassembled DTB are almost the same besides an empty chosen node being removed and nodes reordered, so it should not have functional changes. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2016-06-08ARM: dts: exynos: enable MFC device for all boardsMarek Szyprowski1-1/+0
MFC device can be used without any external hardware dependencies (when IOMMU is enabled), so it can be enabled by default (like it has been already done for Exynos 542x platforms). This unifies handling of this device for Exynos3250, Exynos4 and Exynos542x platforms. Board can still include exynos-mfc-reserved-memory.dtsi to enable using this device without IOMMU being enabled. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-04-28Merge tag 'samsung-dt-exynos-srom-fixup-4.7' of ↵Arnd Bergmann1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt Merge "ARM: dts: exynos: Fixup for SROM controller (v4.7)" from Krzysztof Kozlowski: DeviceTree changes for new SROM controller driver reached mainline some time ago, before the driver was accepted (due to very late comments). However, after these late comments, the driver expects different bindings so we need to fix the DTS. * tag 'samsung-dt-exynos-srom-fixup-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: change SROM node compatible from generic to model specific
2016-04-27ARM: dts: exynos: Enable PRNG and SSS for all Exynos4 devicesKrzysztof Kozlowski1-2/+0
There is no external dependency for Security SubSystem (SSS) block so the nodes for Pseudo Random Number Generator and AES hardware acceleration can be enabled always for all Exynos4 devices. Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-04-18ARM: dts: change SROM node compatible from generic to model specificPankaj Dubey1-2/+2
This patch changes SROM nodes compatible from generic to model specific to match with binding documentation. Also updating property "samsung,srom-page-mode" as it is not defined as bool instead of int Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-04-13ARM: dts: exynos: Fix DTC unit name warnings in Exynos4Krzysztof Kozlowski1-1/+1
Fix following DTC warnings in all Exynos4 boards: Warning (unit_address_vs_reg): Node /soc/video-phy@10020710 has a unit name, but no reg property Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-03-29ARM: dts: exynos: Add node for the HDMI CEC device to exynos4Kamil Debski1-0/+12
This patch adds HDMI CEC node specific to the Exynos4210/4x12 SoC series. Signed-off-by: Kamil Debski <kamil@wypas.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-03-29ARM: dts: exynos: Add Security SubSystem node to Exynos4Krzysztof Kozlowski1-0/+9
Add Security SubSystem (SSS) node to Exynos4 which provides hardware acceleration of AES operations. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-03-13ARM, ARM64: dts: drop "arm,amba-bus" in favor of "simple-bus"Masahiro Yamada1-1/+1
The compatible string "simple-bus" is well defined in ePAPR, while I see no documentation for the "arm,amba-bus" arnywhere in ePAPR or Documentation/devicetree/. DT is also used by other projects than Linux kernel. It is not a good idea to rely on such an unofficial binding. This commit - replaces "arm,amba-bus" with "simple-bus" - drops "arm,amba-bus" where it is used along with "simple-bus" Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-25ARM: dts: exynos: Move syscon reboot/poweroff to common dtsiJavier Martinez Canillas1-14/+1
All Exynos SoCs have the same syscon reboot and poweroff device nodes so there is no need to duplicate the same on each SoC dtsi and can be moved to a common dtsi that can be included by all the SoCs dtsi files. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Alim Akhtar <alim.akhtar@samsung,com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-01-25ARM: dts: Add SROM device node for exynos4Pankaj Dubey1-0/+5
Add device node of SROM controller for exynos4. CC: Rob Herring <robh+dt@kernel.org> CC: Mark Rutland <mark.rutland@arm.com> CC: Ian Campbell <ijc+devicetree@hellion.org.uk> Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org> [k.kozlowski: fixed size of mapped SROMC memory region] Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2015-12-31Merge tag 'samsung-dt-4.5-2' of ↵Arnd Bergmann1-1/+17
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt Merge "Samsung DeviceTree updates and improvements for 4.5" from Krzysztof Kozlowski: 1. eMMC/SDIO minor fixes usage of bindings on Snow and Peach Chromebooks. 2. Remove FIMD from Odroid XU3-family because on XU3 it cannot be used yet and on XU3-Lite and XU4 it is not supported. 3. Remove deprecated since June 2013 samsung,exynos5-hdmi. 4. Add support for Pseudo Random Generator on Exynos4 (Trats2 for now). This depends on new SSS clock. 5. Add rotator nodes for Exynos4 and Exynos5. 6. Switch DWC3_1 on Odroid XU3 and XU3-Lite to peripheral mode because now it cannot be used as OTG. 7. Cleanup the G2D usage on Exynos4 and add it to a proper domain in case of Exynos4210. 8. Put MDMA1 in proper domain on Exynos4210 as well. 9. Minor cleanups. * tag 'samsung-dt-4.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (21 commits) ARM: dts: Unify G2D device node with other devices on exynos4 ARM: dts: Add power domain to G2D device on exynos4210 ARM: dts: MDMA1 device belongs to LCD0 power domain on exynos4210 ARM: dts: Remove unneeded GPIO include in exynos4412-odroidu3 ARM: dts: exynos4210-universal_c210: Disable DMA for UARTs ARM: dts: Use peripheral mode for dwc3_1 on exynos5422-odroidxu3 ARM: dts: Add rotator node on exynos5420 ARM: dts: Add rotator node on exynos5250 ARM: dts: Fix power domain for sysmmu-rotator device on exynos4 ARM: dts: Add rotator nodes on exynos4 ARM: dts: Enable PRNG module on exynos4412-trats2 ARM: dts: Add PRNG module for exynos4 dt-bindings: remove deprecated compatible string from exynos-hdmi ARM: dts: Remove fimd node from exynos5422-odroidxu3-common ARM: dts: Mark eMMC as non-removable in exynos5250-snow-common ARM: dts: Remove broken-cd from eMMC node in exynos5420-peach-pi ARM: dts: Remove broken-cd from eMMC node in exynos5800-peach-pi ARM: dts: Mark SDIO as non-removable in exynos5250-snow-common ARM: dts: Mark SDIO as non-removable in exynos5420-peach-pit ARM: dts: Mark SDIO as non-removable in exynos5800-peach-pi ...
2015-12-29ARM: dts: Fix power domain for sysmmu-rotator device on exynos4Marek Szyprowski1-1/+0
Rotator device and it's SYSMMU belongs to different power domains on various Exynos4 SoC revisions: LCD0 for 4210 and TOP for 4x12. This patch fixes this by moving power-domains property to exynos4210.dtsi. TOP power domain is always enabled and it is not represented in DTS. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2015-12-29ARM: dts: Add rotator nodes on exynos4Marek Szyprowski1-0/+9
This patch adds device node for Rotator device to Exynos 4210 and 4x12 device tree files. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2015-12-29ARM: dts: Add PRNG module for exynos4Krzysztof Kozlowski1-0/+8
Add Pseudo Random Number Generator (PRNG) node of Security Sub System (SSS) to Exynos 4 DTSI. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2015-11-20ARM: dts: Add syscon-{reboot, poweroff} nodes for exynos4Alim Akhtar1-0/+14
This patch adds syscon-{reboot, poweroff} nodes to allow the generic syscon-{reboot, poweroff} driver to reset/poweroff exynos4 SoC. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Pankaj Dubey <pankaj.dubey@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2015-09-13ARM: dts: Add DMA support for serial ports in exynos4Robert Baldyga1-0/+8
Enable DMA transfers for serial ports. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2015-08-13ARM: dts: add iommu property to JPEG device for exynos4Marek Szyprowski1-0/+1
JPEG codec node has been added in parallel to the patch, which added support for IOMMU to Exynos platform, so JPEG device for Exynos4 SoCs lacked IOMMU property. This patch fixes this issue. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-06-26Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds1-1/+1
Pull drm updates from Dave Airlie: "This is the main drm pull request for v4.2. I've one other new driver from freescale on my radar, it's been posted and reviewed, I'd just like to get someone to give it a last look, so maybe I'll send it or maybe I'll leave it. There is no major nouveau changes in here, Ben was working on something big, and we agreed it was a bit late, there wasn't anything else he considered urgent to merge. There might be another msm pull for some bits that are waiting on arm-soc, I'll see how we time it. This touches some "of" stuff, acks are in place except for the fixes to the build in various configs,t hat I just applied. Summary: New drivers: - virtio-gpu: KMS only pieces of driver for virtio-gpu in qemu. This is just the first part of this driver, enough to run unaccelerated userspace on. As qemu merges more we'll start adding the 3D features for the virgl 3d work. - amdgpu: a new driver from AMD to driver their newer GPUs. (VI+) It contains a new cleaner userspace API, and is a clean break from radeon moving forward, that AMD are going to concentrate on. It also contains a set of register headers auto generated from AMD internal database. core: - atomic modesetting API completed, enabled by default now. - Add support for mode_id blob to atomic ioctl to complete interface. - bunch of Displayport MST fixes - lots of misc fixes. panel: - new simple panels - fix some long-standing build issues with bridge drivers radeon: - VCE1 support - add a GPU reset counter for userspace - lots of fixes. amdkfd: - H/W debugger support module - static user-mode queues - support killing all the waves when a process terminates - use standard DECLARE_BITMAP i915: - Add Broxton support - S3, rotation support for Skylake - RPS booting tuning - CPT modeset sequence fixes - ns2501 dither support - enable cmd parser on haswell - cdclk handling fixes - gen8 dynamic pte allocation - lots of atomic conversion work exynos: - Add atomic modesetting support - Add iommu support - Consolidate drm driver initialization - and MIC, DECON and MIPI-DSI support for exynos5433 omapdrm: - atomic modesetting support (fixes lots of things in rewrite) tegra: - DP aux transaction fixes - iommu support fix msm: - adreno a306 support - various dsi bits - various 64-bit fixes - NV12MT support rcar-du: - atomic and misc fixes sti: - fix HDMI timing complaince tilcdc: - use drm component API to access tda998x driver - fix module unloading qxl: - stability fixes" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (872 commits) drm/nouveau: Pause between setting gpu to D3hot and cutting the power drm/dp/mst: close deadlock in connector destruction. drm: Always enable atomic API drm/vgem: Set unique to "vgem" of: fix a build error to of_graph_get_endpoint_by_regs function drm/dp/mst: take lock around looking up the branch device on hpd irq drm/dp/mst: make sure mst_primary mstb is valid in work function of: add EXPORT_SYMBOL for of_graph_get_endpoint_by_regs ARM: dts: rename the clock of MIPI DSI 'pll_clk' to 'sclk_mipi' drm/atomic: Don't set crtc_state->enable manually drm/exynos: dsi: do not set TE GPIO direction by input drm/exynos: dsi: add support for MIC driver as a bridge drm/exynos: dsi: add support for Exynos5433 drm/exynos: dsi: make use of array for clock access drm/exynos: dsi: make use of driver data for static values drm/exynos: dsi: add macros for register access drm/exynos: dsi: rename pll_clk to sclk_clk drm/exynos: mic: add MIC driver of: add helper for getting endpoint node of specific identifiers drm/exynos: add Exynos5433 decon driver ...
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-15 04:01:49 +0300