summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/at91sam9x5ek.dtsi
AgeCommit message (Collapse)AuthorFilesLines
2017-10-30Merge tag 'at91-ab-4.15-dt' of ↵Arnd Bergmann1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/dt Pull" ARM: at91: DT for 4.15" from Alexandre Belloni: - sama5d2 xplained: add charger and SD card power supply - sama5d27_som1_ek: many adjustments - at91sam9x25ek: add pwm0 and can1 * tag 'at91-ab-4.15-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: ARM: dts: at91: at91sam9x5ek: use DMA for USART0 ARM: dts: at91: at91sam9x25ek: add pwm0 ARM: dts: at91: at91sam9x25ek: add CAN1 interface ARM: dts: at91: sama5d2_xplained: remove pull-up on SD/MMC lines ARM: dts: at91: sama5d2_xplained: add pinmuxing for pwm0 ARM: dts: at91: sama5d2_xplained: set PB_USER as wakeup source ARM: dts: at91: sama5d27_som1_ek: remove pull-up on SD/MMC lines ARM: dts: at91: sama5d27_som1_ek: remove not connected CAN0 ARM: dts: at91: sama5d27_som1_ek: add pinmuxing for pwm0 ARM: dts: at91: sama5d27_som1_ek: add aliases for i2c ARM: dts: at91: sama5d27_som1_ek: set USER button as a wakeup source ARM: dts: at91: sama5d27_som1_ek: update serial aliases ARM: dts: at91: sama5d27_som1_ek: enable i2c2 ARM: dts: at91: sama5d27_som1_ek: add disabled status ARM: dts: at91: usb_a9g20: fix rtc node ARM: dts: at91: sama5d2 Xplained: Describe the SD card power supply ARM: dts: at91: sama5d2_xplained: Add charger node
2017-10-20arm: dts: fix unit-address leading 0sRob Herring1-2/+2
Fix dtc warnings for 'simple_bus_reg' due to leading 0s. Converted using the following command: perl -p -i -e 's/\@0+([0-9a-f])/\@$1/g' `find arch/arm/boot/dts -type -f -name '*.dts*' Dropped changes to ARM, Ltd. boards LED nodes and manually fixed up some occurrences of uppercase hex. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-10-10ARM: dts: at91: at91sam9x5ek: use DMA for USART0Nicolas Ferre1-0/+2
Use DMA for USART0 (which is used as ttyS1) as we have enough channels and to show how to specify DMA use with serial nodes. Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-03-06ARM: dts: at91: Disable SPI on at91sam9x5ek to allow MCI1 to work.Cristian Birsan1-1/+1
The A13 hardware line is shared by SPI and MCI1 controller.This patch disables the SPI controller so that the MCI1 (the big MMC card slot) can be used. Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-15ARM: dts: at91: move isi definition to at91sam9g25ekAlexandre Belloni1-33/+0
The ISI is only present on the at91sam9g25, move the definition to the at91sam9g25ek board dts to avoid warnings. Solves the following warning for other 9x5ek boards: Warning (unit_address_vs_reg): Node /ahb/apb/isi@f8048000 has a unit name, but no reg property Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-21ARM: at91/dt: ov2640: add hsync/vsync-active propertyJosh Wu1-0/+2
On at91sam9x5ek/at91sam9m10g45ek/sama5d3xek boards, we use the parallel connection for ov2640. So we must set the hsync/vsync property (1 means active high). Otherwise, the connection would be seen as BT.656 or BT.1120. Signed-off-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-09-18ARM: at91/dt: at91sam9x5: enable iio touchscreen for 9x5ekJosh Wu1-0/+6
Signed-off-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-06-04ARM: at91/dt: at91sam9x5ek: use stdout-pathAlexandre Belloni1-1/+2
Use stdout-path to specify the console and remove the console argument from the kernel command line. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-04ARM: at91: at91sam9x5ek/dts: add ov2640 supportJosh Wu1-0/+48
Add the camera sensor ov2640 dt support. And connect sensor to isi node as well. Signed-off-by: Josh Wu <josh.wu@atmel.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-16ARM: at91/dt: disable pull-up on vbus-gpio (PB16) to reduce power consumptionSylvain Rochet1-0/+9
There is an external resistor divider on PB16, acting like a pull-down, the pull-up increase power consumption and prevent the vbus detect pin to reach Vss voltage, ~1.5V mesured on my board, it might not even work if the pull-up is stronger than usual. Signed-off-by: Sylvain Rochet <sylvain.rochet@finsecur.com> Acked-by: Bo Shen <voice.shen@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-09-07Merge tag 'dt-for-linus' of ↵Linus Torvalds1-0/+24
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC DT updates from Olof Johansson: "Device tree and bindings updates for 3.12. General additions of various on-chip and on-board peripherals on various platforms as support gets added. Some of the bigger changes are: - Addition of (new) PCI-e support on Tegra. - More Tegra4 support, including PMC configuration for Dalmore. - Addition of a new board for Exynos4 (trats2) and more bindings for 4x12 IP. - Addition of Allwinner A20 and A31 SoC and board files. - Move of the ST Ericsson device tree files to now use ste-* prefix. - More move of hardware description of shmobile platforms to DT. - Two new board dts files for Freescale MXs" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (177 commits) dts: Rename DW APB timer compatible strings dts: Deprecate ALTR as a vendor prefix of: add vendor prefix for Altera Corp. ARM: at91/dt: sam9x5ek: add sound configuration ARM: at91/dt: sam9x5ek: enable SSC ARM: at91/dt: sam9x5ek: add WM8731 codec ARM: at91/dt: sam9x5: add SSC DMA parameters ARM: at91/dt: add at91rm9200 PQFP package version ARM: at91: at91rm9200: set default mmc0 pinctrl-names ARM: at91: at91sam9n12: correct pin number of gpio-key ARM: at91: at91sam9n12: add qt1070 support ARM: at91: at91sam9n12: add pinctrl of TWI ARM: at91: Add PMU support for sama5d3 ARM: at91: at91sam9260: add missing pinctrl-names on mmc ARM: tegra: configure power off for Dalmore ARM: DT: binding fixup to align with vendor-prefixes.txt (DT) ARM: dts: add sdio blocks to bcm28155-ap board ARM: dts: align sdio numbers to HW definition ARM: sun7i: Add Olimex A20-Olinuxino-Micro support ARM: sun7i: Add Allwinner A20 DTSI ...
2013-08-21ARM: at91/dt: sam9x5ek: add sound configurationRichard Genoud1-0/+15
The sam9x5ek board has 2 jacks: headphone wired on RHPOUT/LHPOUT of the wm8731 line in wired on LLINEIN/RLINEIN of the wm8731 Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-08-21ARM: at91/dt: sam9x5ek: enable SSCRichard Genoud1-0/+4
Enable the SSC needed for the WM8731 codec Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-08-21ARM: at91/dt: sam9x5ek: add WM8731 codecRichard Genoud1-0/+5
The WM8731 codec on sam9x5ek board is on i2c, address 1A Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Acked-by: Mark Brown <broonie@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-07-18ARM: at91/DT: at91sam9x5ek: fix USB host property to enable port CNicolas Ferre1-2/+3
Device Tree "num-ports" property of USB host node has to be set to maximum number of ports available. The possibility to activate a particular port is done by specifying the proper gpio configuration for its vbus. This patch fixes the USB host node by configuring the 3 ports available on the product and letting "port A" available for USB gadget usage. Reported-by: Rodolfo Giometti <giometti@enneenne.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Bo Shen <voice.shen@atmel.com>
2013-06-15ARM: at91: sam9x5ek add udc DT supportJean-Christophe PLAGNIOL-VILLARD1-0/+5
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Tested-by: Bo Shen <voice.shen@atmel.com>
2013-05-31ARM: at91/dts: add the watchdog nodes for at91 boardsWenyou Yang1-0/+4
boards include: at91sam9263ek, at91sam9g20ek, at91sam9m10g45ek, at91sam9n12ek, at91sam9x5ek Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Tested-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-05-17ARM: at91: dt: switch to pinctrl to pre-processorJean-Christophe PLAGNIOL-VILLARD1-2/+2
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-05-17ARM: at91: dt: switch to standard GPIO flag defines.Jean-Christophe PLAGNIOL-VILLARD1-4/+4
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-05-17ARM: at91: dt: use #include for all device treesJean-Christophe PLAGNIOL-VILLARD1-1/+1
to prepare the switch to the macro. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-05-02Merge tag 'dt-for-linus' of ↵Linus Torvalds1-14/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC device-tree updates from Olof Johansson: "Part 1 of device-tree updates for 3.10. The bulk of the churn in this branch is due to i.MX moving from C-defined pin control over to device tree, which is a one-time conversion that will allow greater flexibility down the road. Besides that, there's PCI-e bindings for Marvell mvebu platforms and a handful of cleanups to tegra due to the new include file functionality of the device tree compiler" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (113 commits) arm: mvebu: PCIe Device Tree informations for Armada XP GP arm: mvebu: PCIe Device Tree informations for Armada 370 DB arm: mvebu: PCIe Device Tree informations for Armada 370 Mirabox arm: mvebu: PCIe Device Tree informations for Armada XP DB arm: mvebu: PCIe Device Tree informations for OpenBlocks AX3-4 arm: mvebu: add PCIe Device Tree informations for Armada XP arm: mvebu: add PCIe Device Tree informations for Armada 370 ARM: sunxi: unify osc24M_fixed and osc24M arm: vt8500: Add SDHC support to WM8505 DT ARM: dts: Add a 64 bits version of the skeleton device tree ARM: mvebu: Add Device Bus and CFI flash memory support to defconfig ARM: mvebu: Add support for NOR flash device on Openblocks AX3 board ARM: mvebu: Add support for NOR flash device on Armada XP-GP board ARM: mvebu: Add Device Bus support for Armada 370/XP SoC ARM: dts: imx6dl-wandboard: Add USB Host support ARM: dts: imx51 cpu node ARM: dts: Add missing imx27-phytec-phycore dtb target ARM: dts: Add NFC support for i.MX27 Phytec PCM038 module ARM: i.MX51: Add PATA support ARM: dts: Add initial support for Wandboard Dual-Lite ...
2013-04-24ARM: dts: add spi nodes for the atmel boardsRichard Genoud1-0/+10
Signed-off-by: Richard Genoud <richard.genoud@gmail.com> [wenyou.yang@atmel.com: added spi nodes for the sam9263ek, sam9g20ek, sam9m10g45ek and sam9n12ek boards] [wenyou.yang@atmel.com: submit the patch] Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-04ARM: at91/dt: fix macb node declarationNicolas Ferre1-5/+0
Macb0 node cannot be activated in generic sam9x5ek.dtsi file as the sam9g15 does not have one. Move the macb0 & macb1 activation in board .dts file that support them. Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-03-26ARM: at91: remove partial parameter in bootargs for at91sam9x5ek.dtsiNicolas Ferre1-1/+1
Remove the malformed "mem=" bootargs parameter in at91sam9x5ek.dtsi Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: stable <stable@vger.kernel.org> # 3.8+
2013-03-21ARM: at91/at91sam9x5ek: i2c1 and i2c2 conflict with macb and lcdRichard Genoud1-8/+0
On at91sam9x5ek, macb0 is enabled, so it conflicts with i2c2 (PB4) same for i2c1, (conflicts with LCD). Moreover, only i2c0 is used on this board. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-11-19ARM: at91: dt: add mmc pinctrl for Atmel reference boardsJean-Christophe PLAGNIOL-VILLARD1-0/+24
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-11-19ARM: at91/dts: add nodes for atmel hsmci controllers for atmel boardsLudovic Desroches1-0/+18
Add mci controller nodes to atmel boards. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-10-13arm: at91: dt: at91sam9 add serial pinctrl supportJean-Christophe PLAGNIOL-VILLARD1-0/+59
Set the dbgu pinctrl config by default as we have only one possible config For other uart set the rxd/txd by default. For at91sam9x5ek create soc based dts as we need to include specific soc dtsi. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-15 22:46:59 +0300