summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/Makefile
AgeCommit message (Collapse)AuthorFilesLines
2021-10-26Merge tag 'qcom-arm64-for-5.16-2' of ↵Arnd Bergmann1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm ARM64 DTS additional patches for v5.16 The RPM and RPMh sleep stats are introduced on a number of platforms, to aid the enablement of entering low power mode. The MSM8916 support receives some polishing touches, followed by introduction of the necessary pieces to use the DeviceTree on 32-bit variants of the MSM8916 platform, in particular to boot the secondary CPUs. Based on this support for the Samsung Galaxy S4 Mini Value Edition is introduced. The Asus Zenfone 2 Laser gained touchscreen, sensors and sdcard support. MSM8996 got support for the its crypto hardware and the Xiaomi Mi 5 gained a description of its LCD panel. The Trogdor device on SC7180 gained support for a second source eDP brigde, while SC7280 gains PCIe support and the newly introduced Herobrine device. Both MSM8916 and SDM845 has their standalong SMEM node dropped, in favour of the newly introduced support for specifying the compatible directly on the reserved-memory node. The SM7225 platform is introduced, as a derrivative of SM6350, initial support for the PM6350 PMIC and based on this the Fairphone 4 is introduced. The RB3 and RB5 devices gains msm-id and board-id, to allow the two DTBs to be baked into a single boot.img that can be booted on both devices. As the GDSC driver has been extended to properly describe the relationship between MMCX and MDSS_GDSC, the now deprecated mmcx regulator is removed from SM8250. SM8350 gained CPU topology, idle-states and fastrpc support. FastRPC was also added for SM8150 and the SA8155p ADP got a couple of remoteprocs enabled. Additionally a number of DT validation issues was corrected across the various platforms and devices. * tag 'qcom-arm64-for-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (77 commits) Revert "arm64: dts: qcom: msm8916-asus-z00l: Add sensors" arm64: dts: qcom: ipq6018: Remove unused 'iface_clk' property from dma-controller node arm64: dts: qcom: ipq6018: Remove unused 'qcom,config-pipe-trust-reg' property arm64: dts: qcom: sm8350: Add CPU topology and idle-states arm64: dts: qcom: Drop unneeded extra device-specific includes arm64: dts: qcom: msm8916: Drop standalone smem node arm64: dts: qcom: Fix node name of rpm-msg-ram device nodes arm64: dts: qcom: msm8916-asus-z00l: Add sensors arm64: dts: qcom: msm8916-asus-z00l: Add SDCard arm64: dts: qcom: msm8916-asus-z00l: Add touchscreen arm64: dts: qcom: sdm845-oneplus: remove devinfo-size from ramoops node arm64: dts: qcom: sdm845: Fix Qualcomm crypto engine bus clock arm64: dts: qcom: msm8996: Add device tree entries to support crypto engine arm64: dts: qcom: msm8996: move clock-frequency from PN547 NFC to I2C bus arm64: dts: qcom: msm8916-asus-z00l: Add sensors arm64: dts: qcom: sdm630: Add disabled Venus support arm64: dts: qcom: pm660l: Remove board-specific WLED configuration arm64: dts: qcom: Move WLED num-strings from pmi8994 to sony-xperia-tone arm64: dts: qcom: pmi8994: Remove hardcoded linear WLED enabled-strings arm64: dts: qcom: pmi8994: Fix "eternal"->"external" typo in WLED node ... Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-26Merge tag 'qcom-dts-for-5.16-2' of ↵Arnd Bergmann1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm DTS more changes for v5.16 The multi-purpose-pin (MPP) driver is finally migrated to use hierarchical IRQ domains, so this bring the associated changes. The remainder of the changes are correcting binding issues, primarily found through DT validation. * tag 'qcom-dts-for-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (26 commits) ARM: dts: qcom: fix typo in IPQ8064 thermal-sensor node ARM: dts: qcom: fix thermal zones naming ARM: dts: qcom: fix flash node naming for RB3011 ARM: dts: qcom: correct mmc node naming ARM: dts: qcom: fix memory and mdio nodes naming for RB3011 dt-bindings: arm: qcom: Fix Nexus 4 vendor prefix ARM: dts: ipq4019-ap.dk01.1-c1: add device compatible in the dts dt-bindings: arm: qcom-ipq4019: add missing device compatible ARM: dts: qcom: apq8026-lg-lenok: rename board vendor dt-bindings: arm: qcom: rename vendor of apq8026-lenok ARM: dts: qcom: sdx55: Drop '#clock-cells' from QMP PHY node ARM: dts: qcom: mdm9615: fix memory node for Sierra Wireless WP8548 ARM: dts: qcom-pma8084: add interrupt controller properties ARM: dts: qcom-pm8941: add interrupt controller properties ARM: dts: qcom-pm8841: add interrupt controller properties ARM: dts: qcom-msm8660: add interrupt controller properties ARM: dts: qcom-mdm9615: add interrupt controller properties ARM: dts: qcom-apq8064: add interrupt controller properties ARM: dts: qcom-apq8060-dragonboard: fix mpps state names ARM: dts: qcom-mdm9615: add gpio-ranges to mpps node, fix its name ... Link: https://lore.kernel.org/r/20211026135855.1205262-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-24ARM: dts: qcom: apq8026-lg-lenok: rename board vendorLuca Weiss1-1/+1
In order to avoid having prefixes for multiple internal divisions of LG use the "lg" prefix instead of "lge". Fixes: ad3f04b7bef6 ("ARM: dts: qcom: Add support for LG G Watch R") Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210928203815.77175-2-luca@z3ntu.xyz
2021-10-24ARM: dts: qcom: msm8916-samsung-serranove: Include dts from arm64Stephan Gerhold1-0/+1
After adding all necessary support for MSM8916 SMP/cpuidle without PSCI on ARM32, build the Samsung Galaxy S4 Mini VE device tree from the arm64 tree together with the ARM32 include to allow booting this device on ARM32. The approach to include device tree files from other architectures is inspired from e.g. the Raspberry Pi (bcm2711-rpi-4-b.dts) where this is used to build the device tree for both ARM32 and ARM64. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211004204955.21077-15-stephan@gerhold.net
2021-10-22Merge tag 'aspeed-5.16-devicetree-2' of ↵Arnd Bergmann1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/dt ASPEED device tree updates for 5.16, round 2 - New machines: * Inventec Transformers, an x86 family server with an AST2600 BMC - Updates to the Everest and Rainier sensors, gpios and KCS devices - New UART routing device tree description * tag 'aspeed-5.16-devicetree-2' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc: ARM: dts: aspeed: Add uart routing to device tree ARM: dts: aspeed: rainier: Enable earlycon ARM: dts: aspeed: rainier: Add front panel LEDs ARM: dts: aspeed: rainier: Add 'factory-reset-toggle' as GPIOF6 ARM: dts: aspeed: rainier: Remove PSU gpio-keys ARM: dts: aspeed: rainier: Remove gpio hog for GPIOP7 ARM: dts: aspeed: rainier: Add eeprom on bus 12 ARM: dts: aspeed: p10bmc: Enable KCS channel 2 ARM: dts: aspeed: p10bmc: Use KCS 3 for MCTP binding ARM: dts: aspeed: Adding Inventec Transformers BMC ARM: dts: aspeed: everest: Fix bus 15 muxed eeproms ARM: dts: aspeed: everest: Add IBM Operation Panel I2C device ARM: dts: aspeed: everest: Add I2C switch on bus 8 ARM: dts: aspeed: rainier and everest: Remove PCA gpio specification ARM: dts: aspeed: p10bmc: Fix ADC iio-hwmon battery node name Link: https://lore.kernel.org/r/CACPK8Xd=eAMk-S3akhGgL4i_K190Nz9t=_CrdHQMJ+nbW172mg@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-22dts: socfpga: Add Mercury+ AA1 devicetreePaweł Anikiel1-0/+1
Add support for the Mercury+ AA1 module for Arria 10 SoC FPGA. Signed-off-by: Paweł Anikiel <pan@semihalf.com> Signed-off-by: Joanna Brozek <jbrozek@antmicro.com> Signed-off-by: Mariusz Glebocki <mglebocki@antmicro.com> Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com> Signed-off-by: Maciej Mikunda <mmikunda@antmicro.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20211021151736.2096926-2-pan@semihalf.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-21ARM: dts: aspeed: Adding Inventec Transformers BMCLin.TommySC 林世欽 TAO1-0/+1
Initial introduction of Inventec Transformers x86 family equipped with AST2600 BMC SoC. Signed-off-by: Tommy Lin <Lin.TommySC@inventec.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/7d7b20575f994a3c9018223a3c5f198d@inventec.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-20Merge tag 'gemini-dts-for-v5.16' of ↵Arnd Bergmann1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt Gemini changes for the v5.16 kernel cycle: - Add device trees for Edimax NS2502 and SSI 1328 - Consolidate PCI interrupts * tag 'gemini-dts-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: ARM: dts: gemini: Consolidate PCI interrupt-map properties ARM: gemini: add device tree for ssi1328 ARM: gemini: add device tree for edimax NS2502 dt-bindings: add vendor prefix for ssi dt-bindings: add vendor prefix for edimax ARM: dts: gemini: add labels for USB, IDE, flash and ethernet Link: https://lore.kernel.org/r/CACRpkdac5Sbt42CtuLMgCazfHdhcP98mEKGjeZ-DVcb=_N90Bg@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-20Merge tag 'imx-dt-5.16' of ↵Arnd Bergmann1-1/+4
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX device tree changes for 5.16: - New board support: Kobo Libra H2O, Tolino Vision 5, SKOV LT2 and Colibri i.MX6ULL eMMC variants. - A series from Fabio Estevam to correct SPI chipselect polarity for various i.MX6/7 boards. - A couple of patches from Krzysztof Kozlowski to clean up unsupported properties from imx6dl-b1x5v2 and imx6dl-prtrvt boards. - A series from Li Yang to clean up LS1021a based boards and add missing device nodes. - A series from Matthias Schiffer to fix typo, add SPI-NOR flash and partition layout for imx7-tqma7/mba7 boards. - Fix the schema check errors in i.MX PCIe device nodes. - Other random and small fix-up and device additions. * tag 'imx-dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (42 commits) ARM: dts: ls1021a-tsn: use generic "jedec,spi-nor" compatible for flash ARM: dts: ls1021a: move thermal-zones node out of soc/ ARM: dts: ls1021a-tsn: remove undocumented property "position" from mma8452 node ARM: dts: ls1021a-qds: change fpga to simple-mfd device ARM: dts: ls1021a: add #power-domain-cells for power-controller node ARM: dts: ls1021a: add #dma-cells to qdma node ARM: dts: ls1021a: fix memory node for schema check ARM: dts: ls1021a: remove regulators simple-bus ARM: dts: ls1021a: disable ifc node by default ARM: dts: ls1021a: breakup long values in thermal node ARM: dts: ls1021a: fix board compatible to follow binding schema ARM: dts: ls1021a: update pcie nodes for dt-schema check ARM: dts: ls1021a-qds: Add node for QSPI flash ARM: dts: ls1021a: change to use SPDX identifiers ARM: dts: ls1021a: change dma channels order to match schema ARM: dts: ls1021a: remove clock-names property for i2c nodes ARM: dts: imx6dl-prtrvt: drop undocumented TRF7970A NFC properties ARM: dts: imx6: phytec: Add gpio pinctrl for i2c bus recovery ARM: dts: imx6: skov: provide panel support for lt2 variants ARM: dts: imx6qdl-apalis: Fix typo in ADC comment ... Link: https://lore.kernel.org/r/20211016140138.1603-3-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-20Merge tag 'mvebu-dt-5.16-1' of ↵Arnd Bergmann1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/dt mvebu dt for 5.16 (part 1) Add support for Netgear GS110EMX switch (Armada 381 SoC based) * tag 'mvebu-dt-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: ARM: dts: mvebu: add device tree for netgear gs110emx switch Link: https://lore.kernel.org/r/874k9imeel.fsf@BL-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-20Merge tag 'stm32-dt-for-v5.16-1' of ↵Arnd Bergmann1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt STM32 DT for v5.16, round 1 Highlights: ---------- - MPU: - ST boards: - Add new stm32mp135f-dk board. It embedds new STM32MP135 SoC, with 512 MB of DDR3. Several connections are available on this board: 4*USB2.0, 1*USB2.0 typeC DRD, SDcard, 2*RJ45, HDMI, Combo Wifi/BT, ... Only SD card, uart4 (console) and watchdog IPs are enabled in this tag. - Change IRQ level for STUSB1600 on DKx boards. - Fix SAI subclocks range. - Add ck_usb0_48m clock in USB OHCI node device to match with STM32MP15 datasheet. - DH boards: - Reduce DHCOR SPI NOR frequency to 50 MHz to avoid sporadic issues. - Fix SAI pin muxing. - Odyssey: - Set DCMI pins. * tag 'stm32-dt-for-v5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: ARM: dts: stm32: use usbphyc ck_usbo_48m as USBH OHCI clock on stm32mp151 ARM: dts: stm32: fix AV96 board SAI2 pin muxing on stm32mp15 ARM: dts: stm32: fix SAI sub nodes register range ARM: dts: stm32: fix STUSB1600 Type-C irq level on stm32mp15xx-dkx ARM: dts: stm32: set the DCMI pins on stm32mp157c-odyssey ARM: dts: stm32: Reduce DHCOR SPI NOR frequency to 50 MHz ARM: dts: stm32: add initial support of stm32mp135f-dk board dt-bindings: stm32: document stm32mp135f-dk board ARM: dts: stm32: add STM32MP13 SoCs support Link: https://lore.kernel.org/r/9d52c3e2-a3b9-89f3-1896-7cd3560e7010@foss.st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-20Merge tag 'aspeed-5.16-devicetree' of ↵Arnd Bergmann1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/dt ASPEED device tree updates for 5.15 - New machines: * TYAN S7106 BMC, a x86 server from about four years ago - Descriptions for the AST2600 ADC, which now has an upstream driver - Lots of GPIO line names. The OpenBMC project has adopted a scheme for naming the lines, and new additions will follow this guide - New I2C devices for Rainier, Everest, EthanolX, Mt Jade - Fixes for fp5280g2 which has seen some recent development, including the addtion of a QEmu machine for testing * tag 'aspeed-5.16-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc: ARM: dts: aspeed: fp5280g2: Use the 64M layout ARM: dts: aspeed: Add TYAN S7106 BMC machine ARM: dts: aspeed: rainier: Add power-config-full-load gpio ARM: dts: aspeed: p10bmc: Define secure boot gpio ARM: dts: aspeed: mtjade: Add some gpios ARM: dts: aspeed: Add ADC for AST2600 and enable for Rainier and Everest ARM: dts: everest: Define name for gpio line B6 ARM: dts: everest: Define name for gpio line Q2 ARM: dts: rainier: Define name for gpio line Q2 ARM: dts: everest: Add 'factory-reset-toggle' as GPIOF6 ARM: dts: aspeed: everest: Add I2C bus 15 muxes ARM: dts: aspeed: rainier: Add system LEDs ARM: dts: aspeed: amd-ethanolx: Add FRU EEPROM ARM: dts: fp5280g2: Enable KCS 3 for MCTP binding Link: https://lore.kernel.org/r/CACPK8XdrMzY9tzdof7KpzxKquTo7GcWW4N9Zqwtmmu73C7htXA@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-20Merge tag 'arm-soc/for-5.16/devicetree' of ↵Arnd Bergmann1-0/+8
https://github.com/Broadcom/stblinux into arm/dt This pull request contains Broadcom ARM-based SoCs Device Tree changes for 5.16, please pull the following: - Matthew provides a set of updates to the Northstar Plus Device Tree files to fix a number of warnings, and prepare the files to support the addition of the Cisco Meraki MX64/MX65 wireless controller devices and finally adds support for those boards. - Rafal continues to provide updates to the BCM5301X Device Tree files in order to fix warnings with the various node names, MDIO muxes and memory nodes. He also adds support for the external switches on the BCM53573 SoC and adds Tenda AC9 switch ports. - Christian provides the description of the Ethernet switch ports for the Cisco Meraki MR32 based on the 53016 SoC - Arinc adds support for the Asus RT-AC88U device based on the BCM4709 and featuring 8 Ethernet ports over the integrated and the external Realtek switch (not supported yet) - Stefan adds support for the Raspberry Pi Compute Module 4 IO board and does a number of preparatory changes to get there to the Device Tree files before doing the actual addition * tag 'arm-soc/for-5.16/devicetree' of https://github.com/Broadcom/stblinux: (31 commits) arm64: dts: broadcom: Add reference to RPi CM4 IO Board ARM: dts: Add Raspberry Pi Compute Module 4 IO Board ARM: dts: Add Raspberry Pi Compute Module 4 dt-bindings: arm: bcm2835: Add Raspberry Pi Compute Module 4 ARM: dts: bcm283x-rpi: Move Wifi/BT into separate dtsi dt-bindings: display: bcm2835: add optional property power-domains ARM: dts: BCM5301X: Add DT for Asus RT-AC88U ARM: BCM53016: MR32: get mac-address from nvmem ARM: BCM53016: Specify switch ports for Meraki MR32 ARM: dts: BCM53573: Add Tenda AC9 switch ports ARM: dts: BCM53573: Describe on-SoC BCM53125 rev 4 switch ARM: dts: BCM5301X: Specify switch ports for more devices ARM: dts: NSP: Fix MX65 MDIO mux warnings ARM: dts: NSP: Fix MX64/MX65 eeprom node name ARM: dts: NSP: Fix MDIO mux node names ARM: dts: NSP: Fix mpcore, mmc node names ARM: dts: NSP: Add bcm958623hr board name to dts ARM: dts: BCM5301X: Fix memory nodes names ARM: dts: BCM5301X: Fix MDIO mux binding ARM: dts: BCM5301X: Fix nodes names ... Link: https://lore.kernel.org/r/20211013174016.831348-1-f.fainelli@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-19Merge tag 'qcom-dts-for-5.16' of ↵Arnd Bergmann1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm DTS updates for v5.16 This extends the previous limited description of MSM8226 with SDHC, UART, I2C, SCM, SMEM, RPM and basic PMIC definitions. Based on this, initial support for the LG G Watch R smartwatch is introduced. APQ8064 gets a couple of DT updates, one which will allow the GPU driver to drop supporting legacy "opp tables" in the future. DT bindings and DTS files are updated with additional compatibles, for completeness. * tag 'qcom-dts-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: dt-bindings: arm: qcom, add missing devices ARM: dts: qcom: msm8974: Add xo_board reference clock to DSI0 PHY ARM: dts: qcom: fill secondary compatible for multiple boards ARM: dts: qcom: apq8064: adjust memory node according to specs ARM: dts: qcom: apq8064: Convert adreno from legacy gpu-pwrlevels to opp-v2 ARM: dts: qcom: Add support for LG G Watch R dt-bindings: arm: qcom: Document APQ8026 SoC binding ARM: dts: qcom: Add pm8226 PMIC ARM: dts: qcom: msm8226: Add more SoC bits dt-bindings: arm: qcom: Document SDX65 platform and boards Link: https://lore.kernel.org/r/20211012174310.1017857-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-15ARM: dts: stm32: add initial support of stm32mp135f-dk boardAlexandre Torgue1-0/+1
Add support of stm32mp135f discovery board (part number: STM32MP135F-DK). It embeds a STM32MP135F SOC with 512 MB of DDR3. Several connections are available on this board: 4*USB2.0, 1*USB2.0 typeC DRD, SDcard, 2*RJ45, HDMI, Combo Wifi/BT, ... Only SD card, uart4 (console) and watchdog IPs are enabled in this commit. Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2021-10-13ARM: dts: mvebu: add device tree for netgear gs110emx switchMarcel Ziswiler1-0/+1
Add the device tree for a Netgear GS110EMX switch featuring 8 Gigabit ports and 2 Multi-Gig ports (100M/1G/2.5G/5G/10G). An 88E6390X switch sits at its core connecting to two 88X3310P 10G PHYs. The control plane is handled by an 88F6811 Armada 381 SoC. The following functionality is tested: - 8 gigabit Ethernet ports connecting via 88E6390X to the 88F6811 - serial console UART - 128 MB commercial grade DDR3L SDRAM - 16 MB serial SPI NOR flash The two 88X3310P 10G PHYs while detected during boot seem neither to detect any link nor pass any traffic. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2021-10-12ARM: dts: aspeed: Add TYAN S7106 BMC machineOskar Senft1-1/+2
The TYAN S7106 is a server platform with an ASPEED AST2500 BMC. Signed-off-by: Oskar Senft <osk@google.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20210909004920.1634322-1-osk@google.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-09Merge tag 'tags/bcm2835-dt-next-2021-10-06' into devicetree/nextFlorian Fainelli1-0/+1
Stefan Wahren adds devicetree support for the Raspbery Pi Compute Module 4 and its IO board Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2021-10-06ARM: dts: Add Raspberry Pi Compute Module 4 IO BoardStefan Wahren1-0/+1
This adds the matching carrier for Raspberry Pi Compute Module 4. Instead of xHCI USB host controller there is just a USB 2.0 interface connected to the DWC2 controller from the BCM2711. As a result there is a free PCIe Gen 2 socket. Also there are 2 full-size HDMI 2.0 connectors. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://lore.kernel.org/r/1628334401-6577-10-git-send-email-stefan.wahren@i2se.com Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
2021-10-05ARM: dts: imx: add devicetree for Tolino Vision 5Andreas Kemnade1-0/+1
This adds a devicetree for the Tolino Vision 5 Ebook reader. It is based on boards called ¨e70k02¨. It is equipped with an imx6sl SoC. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-10-05ARM: dts: imx: add devicetree for Kobo Libra H2OAndreas Kemnade1-1/+2
This adds a devicetree for the Kobo Libra H2O Ebook reader. It is based on boards called e70k02. It is equipped with an imx6sll SoC. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-10-05ARM: dts: colibri-imx6ull-emmc: add device treeMax Krummenacher1-0/+1
Add a device tree for a Colibri iMX6ULL 1GB which has a eMMC instead of the raw NAND used on other SKUs. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-09-23ARM: gemini: add device tree for ssi1328Corentin Labbe1-0/+1
The SSI 1328 is a NAS box running a SL3516 SoC. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-09-23ARM: gemini: add device tree for edimax NS2502Corentin Labbe1-0/+1
The edimax NS2502 is a NAS box running a SL3516 SoC. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-09-22ARM: dts: BCM5301X: Add DT for Asus RT-AC88UArınç ÜNAL1-0/+1
Hardware Info ------------- Processor - Broadcom BCM4709C0KFEBG dual-core @ 1.4 GHz Switch - BCM53012 in BCM4709C0KFEBG & external RTL8365MB DDR3 RAM - 512 MB Flash - 128 MB (ESMT F59L1G81LA-25T) 2.4GHz - BCM4366 4×4 2.4/5G single chip 802.11ac SoC 5GHz - BCM4366 4×4 2.4/5G single chip 802.11ac SoC Ports - 8 Ports, 1 WAN Ports Tested on OpenWrt on kernel 5.10 built with DSA driver. Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2021-09-15ARM: dts: at91: add Exegin Q5xR5 boardOwen Kirby1-0/+1
Add Exegin Q5xR5. The base device tree is from OpenWrt tree and with the addition of this patch there will be no need to maintain it separatelly in OpenWrt. [osk: original author of patch in OpenWrt] [claudiu.beznea: use "&<label> {" syntax, sorted nodes in alphabetical order, adapted flash to new support in kernel 5.14, use proper compatibles according to kernel 5.14, use macros instead of hardcoded numbers for pinctrl phandles and for all pinctrl references, add pinctrl-names, pinctrl-X where necessaray] Signed-off-by: Owen Kirby <osk@exegin.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20210816064416.1630674-8-claudiu.beznea@microchip.com
2021-09-15ARM: dts: at91: add CalAmp LMU5000 boardAdam Porter1-0/+1
Add CalAmp LMU5000 board. The base device tree is from OpenWrt tree and with the addition of this patch there will be no need to maintain it separatelly in OpenWrt. [porter.adam: original author of patch in OpenWrt] [claudiu.beznea: fixed compilation warnings, use &<lable> syntax, sorted nodes in alphabetical order, adapted flash to new support in kernel 5.14, use proper compatibles according to kernel 5.14, use macros instead of hard coded numbers for pinctrl phandles and for all pinctrl references, add pinctrl-names, pinctrl-X where necessary] Signed-off-by: Adam Porter <porter.adam@gmail.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20210816064416.1630674-5-claudiu.beznea@microchip.com
2021-09-15ARM: dts: NSP: Add DT files for Meraki MX65 seriesMatthew Hagan1-0/+2
MX65 & MX65W Hardware info: - CPU: Broadcom BCM58625 Cortex A9 @ 1200Mhz - RAM: 2 GB (4 x 4Gb SK Hynix H5TC4G83CFR) - Storage: 1 GB (Micron MT29F8G08ABACA) - Networking: BCM58625 switch (2x 1GbE ports) 2x Qualcomm QCA8337 switches (10x 1GbE ports total) - PSE: Broadcom BCM59111KMLG connected to LAN ports 11 & 12 - USB: 1x USB2.0 - Serial: Internal header - WLAN(MX65W Only): 2x Broadcom BCM43520KMLG on the PCI bus. Note that a driver and firmware image for the BCM59111 PSE has been released under GPL, but this is not present in the kernel. Signed-off-by: Matthew Hagan <mnhagan88@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2021-09-15ARM: dts: NSP: Add DT files for Meraki MX64 seriesMatthew Hagan1-0/+4
MX64 & MX64W Hardware info: - CPU: Broadcom BCM58625 Cortex A9 @ 1200Mhz - RAM: 2 GB (4 x 4Gb SK Hynix H5TC4G83CFR) - Storage: 1 GB (Micron MT29F8G08ABACA) - Networking: BCM58625 internal switch (5x 1GbE ports) - USB: 1x USB2.0 - Serial: Internal header - WLAN(MX64W only): 2x Broadcom BCM43520KMLG on the PCI bus This patch adds the Meraki MX64 series-specific bindings. Since some devices make use of the older A0 SoC, changes need to be made to accommodate this case, including removal of coherency options and modification to the secondary-boot-reg. Signed-off-by: Matthew Hagan <mnhagan88@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2021-09-13ARM: dts: qcom: Add support for LG G Watch RLuca Weiss1-0/+1
Add a device tree for the LG G Watch R smartwatch, manufactured by LG Electronics and based on the msm8226 platform (apq8026). Currently UART, internal storage, power button and touchscreen are supported. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> [bjorn: Moved "rpm_requests" before "sdhc", to keep things sorted] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210911232707.259615-9-luca@z3ntu.xyz
2021-08-18Merge tag 'aspeed-5.15-devicetree' of ↵Arnd Bergmann1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/dt ASPEED device tree updates for 5.15 - New machines * Facebook's Cloudripper * Facebook's Elbert * Facebook's Fuji All three carry the description of "Facebook's next generation switch platform with an AST2600 BMC integrated for health monitoring purpose." They share a 128 MB SPI NOR flash layout that is also used by some older platforms. * Inspur's NF5280M6, an x86 platform server with an AST2500-based BMC - SGPIO updates including AST2600 support - GPIO descriptions for the IBM AST2600 machines - Pinctrl fix - Updates to Facebook's AST2500 based machines * tag 'aspeed-5.15-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc: (23 commits) ARM: dts: aspeed: p10bmc: Add power control pins ARM: dts: aspeed: cloudripper: Add comments for "mdio1" ARM: dts: aspeed: minipack: Update flash partition table ARM: dts: aspeed: Add Facebook Fuji (AST2600) BMC ARM: dts: aspeed: Add Facebook Elbert (AST2600) BMC ARM: dts: aspeed: Add Facebook Cloudripper (AST2600) BMC ARM: dts: aspeed: Common dtsi for Facebook AST2600 Network BMCs ARM: dts: aspeed: wedge400: Use common flash layout ARM: dts: Add Facebook BMC 128MB flash layout ARM: dts: aspeed-g5: Remove ngpios from sgpio node. ARM: dts: aspeed-g6: Add SGPIO node. dt-bindings: aspeed-sgpio: Add ast2600 sgpio dt-bindings: aspeed-sgpio: Convert txt bindings to yaml. ARM: dts: aspeed: ast2500evb: Enable built in RTC ARM: dts: aspeed: tacoma: Add TPM reset GPIO ARM: dts: rainier, everest: Add TPM reset GPIO ARM: dts: aspeed: wedge100: Enable ADC channels ARM: dts: aspeed: galaxy100: Remove redundant ADC device ARM: dts: aspeed: wedge40: Remove redundant ADC device ARM: dts: aspeed: Enable ADC in Facebook AST2400 common dtsi ... Link: https://lore.kernel.org/r/CACPK8XdWRBb9cuDWGQPfK8R8TsZuydJQHsL4_e2w=HvCKAMogg@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-17Merge tag 'qcom-dts-for-5.15' of ↵Arnd Bergmann1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm dts updates for v5.15 This introduces the MSM8226 platform and an initial dts for the Samsung Galaxy S III Neo phone. MSM8974 gains another UART and this is used to enable Bluetooth on the Sony Xperia Z2 Tablet. Samsung Galaxy S5 gains regulator definitions for audio and modem remoteprocs, effectively enabling these. DSI clocks on APQ8064 are updates as the old legacy clock names are no longer supported by the driver. And IPQ806x GMAC nodes gains AHB resets wired up. Lastly APQ8060 is converted to a SPDX header and the ethernet node is updates in accordance with the binding. * tag 'qcom-dts-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: ARM: dts: qcom: add ahb reset to ipq806x-gmac ARM: dts: qcom: Fix up APQ8060 DragonBoard license ARM: dts: qcom: msm8974: castor: Add Bluetooth-related nodes ARM: dts: qcom: msm8974: Add blsp2_uart7 for bluetooth on sirius ARM: dts: qcom: Add initial DTS file for Samsung Galaxy S III Neo phone dt-bindings: arm: qcom: Document MSM8226 SoC binding ARM: dts: qcom: Add support for MSM8226 SoC ARM: dts: qcom: apq8060: Correct Ethernet node name and drop bogus irq property ARM: dts: qcom: apq8064: correct clock names ARM: dts: qcom: msm8974-klte: Enable remote processors Link: https://lore.kernel.org/r/20210816211957.579365-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-17Merge tag 'imx-dt-5.15' of ↵Arnd Bergmann1-1/+10
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX arm32 device tree changes for 5.15: - A series from Christoph Niedermaier to clean up i.MX6 DHCOM support. - New board support: DHCOM based PicoITX, DHSOM based DRC02, SolidRun SolidSense, SKOV i.MX6 boards. - Add WiFi support for i.MX7D base reMkarkable2 device. - Add FTM devices for i.MX7 to have Flex Timers support. - Configure ENET_REF clock to 125MHz for imx6qp-prtwd3 to support RGMII PHY mode. - Drop unneeded #address-cells and #size-cells from vf610-zii SPI EEPROM device node. - Add missing USB OTG OC pinmux and Crypto device for i.MX6QDL Gateworks boards. * tag 'imx-dt-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (23 commits) ARM: dts: imx6qp-prtwd3: configure ENET_REF clock to 125MHz ARM: dts: vf610-zii-dev-rev-b: Remove #address-cells and #size-cells property from at93c46d dt node ARM: dts: add SKOV imx6q and imx6dl based boards ARM: dts: imx7: add ftm nodes for Flex Timers ARM: dts: imx6qdl-dhcom: Add DHSOM based DRC02 board ARM: dts: imx6qdl-dhcom: Add DHCOM based PicoITX board ARM: dts: imx6qdl-dhcom: Split SoC-independent parts of DHCOM SOM and PDK2 ARM: dts: imx6q-dhcom: Cleanup of the devicetrees ARM: dts: imx6q-dhcom: Rearrange of iomux ARM: dts: imx6q-dhcom: Rework of the DHCOM GPIO pinctrls ARM: dts: imx6q-dhcom: Use 1G ethernet on the PDK2 board ARM: dts: imx6q-dhcom: Set minimum memory size of all DHCOM i.MX6 variants ARM: dts: imx6q-dhcom: Remove ddc-i2c-bus property ARM: dts: imx6q-dhcom: Add keys and leds to the PDK2 board ARM: dts: imx6q-dhcom: Align stdout-path with other DHCOM SoMs ARM: dts: imx6q-dhcom: Adding Wake pin to the PCIe pinctrl ARM: dts: imx6q-dhcom: Fill GPIO line names on DHCOM SoM ARM: dts: imx6q-dhcom: Add interrupt and compatible to the ethernet PHY ARM: dts: imx6q-dhcom: Add the parallel system bus ARM: dts: imx7d-remarkable2: Add WiFi support ... Link: https://lore.kernel.org/r/20210814133853.9981-2-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-14ARM: dts: add SKOV imx6q and imx6dl based boardsSam Ravnborg1-0/+5
Add SKOV imx6q/dl LT2, LT6 and mi1010ait-1cp1 boards. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Søren Andersen <san@skov.dk> Signed-off-by: Juergen Borleis <jbe@pengutronix.de> Signed-off-by: Ulrich Ölmann <u.oelmann@pengutronix.de> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-08-13ARM: dts: aspeed: Add Facebook Fuji (AST2600) BMCTao Ren1-0/+1
Add initial version of device tree for Facebook Fuji (AST2600) BMC. Fuji is Facebook's next generation switch platform with an AST2600 BMC integrated for health monitoring purpose. Signed-off-by: Tao Ren <rentao.bupt@gmail.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20210805222818.8391-7-rentao.bupt@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-08-13ARM: dts: aspeed: Add Facebook Elbert (AST2600) BMCTao Ren1-0/+1
Add initial version of device tree for Facebook Elbert (AST2600) BMC. Elbert is Facebook's next generation switch platform with an AST2600 BMC integrated for health monitoring purpose. Signed-off-by: Tao Ren <rentao.bupt@gmail.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20210805222818.8391-6-rentao.bupt@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-08-13ARM: dts: aspeed: Add Facebook Cloudripper (AST2600) BMCTao Ren1-0/+1
Add initial version of device tree for Facebook Cloudripper (AST2600) BMC. Cloudripper is Facebook's next generation switch platform with an AST2600 BMC integrated for health monitoring purpose. Signed-off-by: Tao Ren <rentao.bupt@gmail.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20210805222818.8391-5-rentao.bupt@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-08-12Merge tag 'ixp4xx-dts-arm-soc-v5.15-1' of ↵Arnd Bergmann1-1/+13
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt IXP4xx DTS file updates for the v5.15 kernel cycle: - Fix up some (non-urgent) IRQ flags for the PCI buses. - Add the second UART to the generic ixp4xx.dtsi - Make use of the new expansion bus driver in all device trees with e.g. flash memory on the expansion bus. - Adds the CF card slot to the Gateworks GW2358. - Add new device trees for: - Iomega NAS 100D - D-Link DSM-G600 - Netgear WG302v2 - Arcom Vulcan - Gateworks Avila GW2348 - Intel IXPD425 and siblings - Coyote and IXDPG425 - Linksys WRV54G * tag 'ixp4xx-dts-arm-soc-v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: ARM: dts: ixp4xx: Add a devicetree for Freecom FSG-3 ARM: dts: ixp4xx: Add devicetree for Linksys WRV54G ARM: dts: ixp4xx: Add device trees for Coyote and IXDPG425 ARM: dts: ixp4xx: Add Intel IXDP425 etc reference designs ARM: dts: ixp4xx: Add CF to GW2358 ARM: dts: ixp4xx: Add Gateworks Avila GW2348 device tree ARM: dts: ixp4xx: Add Arcom Vulcan device tree ARM: dts: ixp4xx: Add devicetree for Netgear WG302v2 ARM: dts: ixp4xx: Use the expansion bus ARM: dts: ixp4xx: Add second UART ARM: dts: ixp4xx: Add devicetree for D-Link DSM-G600 rev A ARM: dts: ixp4xx: Move EPBX100 flash to external bus node ARM: dts: ixp4xx: Add devicetree for Iomega NAS 100D ARM: dts: ixp4xx: Fix up bad interrupt flags Link: https://lore.kernel.org/r/CACRpkdY19AvWT--OcmEKbwFue_EcThVs7uZeHkzORten7xj-RA@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-12Merge tag 'sti-dt-for-v5.15-round1' of ↵Arnd Bergmann1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti into arm/dt Highlights: ----------- - Introduce 4KOpen STiH418-b2264 board - Remove clk_ignore_unused from STi boards DT - Remove clock-output-names and clk_critical properties - Update some clock compatible * tag 'sti-dt-for-v5.15-round1' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti: ARM: dts: sti: remove clk_ignore_unused from bootargs for stih410-b2260 ARM: dts: sti: remove clk_ignore_unused from bootargs for stih418-b2199 ARM: dts: sti: remove clk_ignore_unused from bootargs for stih410-b2120 ARM: dts: sti: remove clk_ignore_unused from bootargs for stih407-b2120 ARM: dts: sti: Introduce 4KOpen (stih418-b2264) board ARM: dts: sti: add the thermal sensor node within stih418 ARM: dts: sti: disable rng11 on the stih418 platform ARM: dts: sti: add the spinor controller node within stih407-family ARM: dts: sti: update clkgen-fsyn entries in stih418-clock ARM: dts: sti: update clkgen-fsyn entries in stih410-clock ARM: dts: sti: update clkgen-fsyn entries in stih407-clock ARM: dts: sti: update clkgen-pll entries in stih418-clock ARM: dts: sti: update clkgen-pll entries in stih410-clock ARM: dts: sti: update clkgen-pll entries in stih407-clock ARM: dts: sti: update flexgen compatible within stih410-clock ARM: dts: sti: update flexgen compatible within stih407-clock ARM: dts: sti: update flexgen compatible within stih418-clock Link: https://lore.kernel.org/r/1d95209f-9cb4-47a3-2696-7a93df7cdc05@foss.st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-12Merge tag 'omap-for-v5.15/dt-signed' of ↵Arnd Bergmann1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt Devicetree changes for omaps for v5.15 Devicetree changes for omaps to configure more devices, and add support for new SoC variants and devices: - Add add gpio-line-names for am335x-boneblue - Add support for dra762 abz package - Two patches for McASP support on omap4 - Three patches to add support for am335x-sancloud-bbe-lite - A series of changes to configure PRUSS for am3/4/5 * tag 'omap-for-v5.15/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am57xx: Add PRUSS MDIO controller nodes ARM: dts: am57xx: Add PRU-ICSS nodes ARM: dts: am4372: Add PRUSS MDIO controller node ARM: dts: am4372: Add the PRU-ICSS0 DT node ARM: dts: am4372: Add the PRU-ICSS1 DT node ARM: dts: am335x-icev2: Enable PRU-ICSS module ARM: dts: am335x-evmsk: Enable PRU-ICSS module ARM: dts: am335x-evm: Enable PRU-ICSS module ARM: dts: am335x-bone-common: Enable PRU-ICSS node ARM: dts: am33xx-l4: Add PRUSS MDIO controller node ARM: dts: am33xx-l4: Add PRUSS node ARM: dts: am335x-sancloud-bbe-lite: New devicetree ARM: dts: am335x-sancloud-bbe: Extract common code ARM: dts: am335x-boneblack: Extract HDMI config ARM: dts: omap4-l4-abe: Add McASP configuration ARM: dts: omap4-l4-abe: Correct sidle modes for McASP ARM: dts: Add support for dra762 abz package ARM: dts: am335x-boneblue: add gpio-line-names Link: https://lore.kernel.org/r/pull-1628153040-834155@atomide.com-3 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-09ARM: dts: imx6qdl-dhcom: Add DHSOM based DRC02 boardChristoph Niedermaier1-1/+2
Add DT for DH DRC02 unit, which is a universal controller device. The system has two ethernet ports, two CANs, RS485 and RS232, USB, capacitive buttons and an OLED display. Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: kernel@dh-electronics.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-08-09ARM: dts: imx6qdl-dhcom: Add DHCOM based PicoITX boardChristoph Niedermaier1-0/+1
Add DT for DH PicoITX unit, which is a bare-bones carrier board for the DHCOM. The board has ethernet port, USB, CAN, LEDs and a custom board-to-board expansion connector. Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: kernel@dh-electronics.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-08-09ARM: dts: ixp4xx: Add a devicetree for Freecom FSG-3Linus Walleij1-0/+1
This adds a devicetree for the Freecom FSG-3, a combined router and NAS. Cc: Rod Whitby <rod@whitby.id.au> Cc: Marc Zyngier <maz@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-08-09ARM: dts: ixp4xx: Add devicetree for Linksys WRV54GLinus Walleij1-0/+1
This adds a device tree for the Linksys WRV54G also known as Gemtek GTWX5715. Some enhancements have been folded in from the OpenWrt patches. This supports everything in the upstream kernel with placeholders for the out-of-tree multiphy which exist in OpenWrt. Cc: phj@phj.hu Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-08-09ARM: dts: ixp4xx: Add device trees for Coyote and IXDPG425Linus Walleij1-0/+2
This adds device trees for the ADI Engineering Coyote and the Intel IXDPG425 reference design. The ethernet set-up on the IXDPG425 is a bit dubious because I think it uses a DSA switch chip, but this is a good as it gets right now. The Coyote boardfile claims an IDE port exist at 0xFFFE1000 but the implementation does not use this. If you have the board and can/want to test, please contact me. Cc: Deepak Saxena <dsaxena@plexity.net> Cc: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Cc: Zoltan HERPAI <wigyori@uid0.hu> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-08-09ARM: dts: ixp4xx: Add Intel IXDP425 etc reference designsLinus Walleij1-0/+3
The IXDP425, IXCDP1100, KIXRP435 and IXDP465 are similar Intel reference designs for IXP42x, IXP43x and IXP4[56]x. This adds device trees for these so the board files can be migrated. Cc: Deepak Saxena <dsaxena@plexity.net> Cc: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-08-09ARM: dts: ixp4xx: Add Gateworks Avila GW2348 device treeLinus Walleij1-0/+1
This adds a device tree file for the Gateworks Avila GW2348 platform supporting all the features of the in-kernel boardfiles. There are more boards in the Avila family, but this is the one that is supported out-of-the-box by the current boardfiles. Some extra features have been folded in from the upstream OpenWrt sources, such as proper ethernet setup for both ethernet ports. More variants can be added based on this device tree. Some of those have DSA switches, multiple LEDs, multiple serial ports and similar and would need some more elaborate work. Cc: Michael-Luke Jones <mlj28@cam.ac.uk> Cc: Deepak Saxena <dsaxena@plexity.net> Cc: Tom Billman <kernel@giantshoulderinc.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-08-09ARM: dts: ixp4xx: Add Arcom Vulcan device treeLinus Walleij1-1/+2
This adds a device tree for the Arcom Vulcan IXP42x board. Cc: Marc Zyngier <maz@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-08-09ARM: dts: ixp4xx: Add devicetree for Netgear WG302v2Linus Walleij1-1/+2
This adds a devicetree for the Netgear WG302v2 router. The DTS is mostly based on the upstream boardfile but I also added in the ethernet from OpenWrt to get a more complete system. Cc: Imre Kaloz <kaloz@openwrt.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-08-09ARM: dts: ixp4xx: Add devicetree for D-Link DSM-G600 rev ALinus Walleij1-0/+1
This adds a devicetree for the D-Link DSM-G600 Wireless Network Storage Enclosure so that we can delete the boardfile. The boardfile does not even define an ethernet interface as it has an external ethernet on PCI. This devicetree is for revision A using IXP420 the rev B version uses PowerPC. Cc: Michael-Luke Jones <mlj28@cam.ac.uk> Cc: Rod Whitby <rod@whitby.id.au> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Michael Westerhof <mwester@dls.net> Cc: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-08 23:17:26 +0300