summaryrefslogtreecommitdiff
path: root/arch/arc
AgeCommit message (Collapse)AuthorFilesLines
2021-05-10ARC: mm: Use max_high_pfn as a HIGHMEM zone borderVladimir Isaev1-1/+10
Commit 4af22ded0ecf ("arc: fix memory initialization for systems with two memory banks") fixed highmem, but for the PAE case it causes bug messages: | BUG: Bad page state in process swapper pfn:80000 | page:(ptrval) refcount:0 mapcount:1 mapping:00000000 index:0x0 pfn:0x80000 flags: 0x0() | raw: 00000000 00000100 00000122 00000000 00000000 00000000 00000000 00000000 | raw: 00000000 | page dumped because: nonzero mapcount | Modules linked in: | CPU: 0 PID: 0 Comm: swapper Not tainted 5.12.0-rc5-00003-g1e43c377a79f #1 This is because the fix expects highmem to be always less than lowmem and uses min_low_pfn as an upper zone border for highmem. max_high_pfn should be ok for both highmem and highmem+PAE cases. Fixes: 4af22ded0ecf ("arc: fix memory initialization for systems with two memory banks") Signed-off-by: Vladimir Isaev <isaev@synopsys.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: stable@vger.kernel.org #5.8 onwards Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2021-05-10ARC: mm: PAE: use 40-bit physical page maskVladimir Isaev5-13/+19
32-bit PAGE_MASK can not be used as a mask for physical addresses when PAE is enabled. PAGE_MASK_PHYS must be used for physical addresses instead of PAGE_MASK. Without this, init gets SIGSEGV if pte_modify was called: | potentially unexpected fatal signal 11. | Path: /bin/busybox | CPU: 0 PID: 1 Comm: init Not tainted 5.12.0-rc5-00003-g1e43c377a79f-dirty | Insn could not be fetched | @No matching VMA found | ECR: 0x00040000 EFA: 0x00000000 ERET: 0x00000000 | STAT: 0x80080082 [IE U ] BTA: 0x00000000 | SP: 0x5f9ffe44 FP: 0x00000000 BLK: 0xaf3d4 | LPS: 0x000d093e LPE: 0x000d0950 LPC: 0x00000000 | r00: 0x00000002 r01: 0x5f9fff14 r02: 0x5f9fff20 | ... | Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Signed-off-by: Vladimir Isaev <isaev@synopsys.com> Reported-by: kernel test robot <lkp@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: stable@vger.kernel.org Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2021-05-10ARC: entry: fix off-by-one error in syscall number validationVineet Gupta1-2/+2
We have NR_syscall syscalls from [0 .. NR_syscall-1]. However the check for invalid syscall number is "> NR_syscall" as opposed to >=. This off-by-one error erronesously allows "NR_syscall" to be treated as valid syscall causeing out-of-bounds access into syscall-call table ensuing a crash (holes within syscall table have a invalid-entry handler but this is beyond the array implementing the table). This problem showed up on v5.6 kernel when testing glibc 2.33 (v5.10 kernel capable, includng faccessat2 syscall 439). The v5.6 kernel has NR_syscalls=439 (0 to 438). Due to the bug, 439 passed by glibc was not handled as -ENOSYS but processed leading to a crash. Link: https://github.com/foss-for-synopsys-dwc-arc-processors/linux/issues/48 Reported-by: Shahab Vahedi <shahab@synopsys.com> Cc: <stable@vger.kernel.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2021-05-10ARC: kgdb: add 'fallthrough' to prevent a warningRandy Dunlap1-0/+1
Use the 'fallthrough' macro to document that this switch case does indeed fall through to the next case. ../arch/arc/kernel/kgdb.c: In function 'kgdb_arch_handle_exception': ../arch/arc/kernel/kgdb.c:141:6: warning: this statement may fall through [-Wimplicit-fallthrough=] 141 | if (kgdb_hex2long(&ptr, &addr)) | ^ ../arch/arc/kernel/kgdb.c:144:2: note: here 144 | case 'D': | ^~~~ Cc: linux-snps-arc@lists.infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2021-05-10arc: Fix typos/spellosBhaskar Chowdhury4-9/+9
s/commiting/committing/ s/defintion/definition/ s/gaurantees/guarantees/ s/interrpted/interrupted/ s/interrutps/interrupts/ s/succeded/succeeded/ s/unconditonally/unconditionally/ Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2021-05-05mm: drop redundant HAVE_ARCH_TRANSPARENT_HUGEPAGEAnshuman Khandual1-4/+1
HAVE_ARCH_TRANSPARENT_HUGEPAGE has duplicate definitions on platforms that subscribe it. Drop these reduntant definitions and instead just select it on applicable platforms. Link: https://lkml.kernel.org/r/1617259448-22529-7-git-send-email-anshuman.khandual@arm.com Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc] Cc: Russell King <linux@armlinux.org.uk> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Palmer Dabbelt <palmerdabbelt@google.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Rich Felker <dalias@libc.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05mm: generalize ARCH_HAS_CACHE_LINE_SIZEAnshuman Khandual1-3/+1
Patch series "mm: some config cleanups", v2. This series contains config cleanup patches which reduces code duplication across platforms and also improves maintainability. There is no functional change intended with this series. This patch (of 6): ARCH_HAS_CACHE_LINE_SIZE config has duplicate definitions on platforms that subscribe it. Instead, just make it a generic option which can be selected on applicable platforms. This change reduces code duplication and makes it cleaner. Link: https://lkml.kernel.org/r/1617259448-22529-1-git-send-email-anshuman.khandual@arm.com Link: https://lkml.kernel.org/r/1617259448-22529-2-git-send-email-anshuman.khandual@arm.com Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64] Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc] Cc: Will Deacon <will@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Palmer Dabbelt <palmerdabbelt@google.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-04-30mm: move mem_init_print_info() into mm_init()Kefeng Wang1-1/+0
mem_init_print_info() is called in mem_init() on each architecture, and pass NULL argument, so using void argument and move it into mm_init(). Link: https://lkml.kernel.org/r/20210317015210.33641-1-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> [x86] Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr> [powerpc] Acked-by: David Hildenbrand <david@redhat.com> Tested-by: Anatoly Pugachev <matorola@gmail.com> [sparc64] Acked-by: Russell King <rmk+kernel@armlinux.org.uk> [arm] Acked-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Guo Ren <guoren@kernel.org> Cc: Yoshinori Sato <ysato@users.osdn.me> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: "Peter Zijlstra" <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-03-22ARC: treewide: avoid the pointer addition with NULL pointerdean.yang_cp1-13/+14
Signed-off-by: dean.yang_cp <yangdianqing@yulong.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2021-03-22arc: kernel: Return -EFAULT if copy_to_user() failsWang Qing1-2/+2
The copy_to_user() function returns the number of bytes remaining to be copied, but we want to return -EFAULT if the copy doesn't complete. Signed-off-by: Wang Qing <wangqing@vivo.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2021-03-12ARC: haps: bump memory to 1 GBVineet Gupta1-1/+1
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2021-02-22arch: setup PF_IO_WORKER threads like PF_KTHREADJens Axboe1-1/+1
PF_IO_WORKER are kernel threads too, but they aren't PF_KTHREAD in the sense that we don't assign ->set_child_tid with our own structure. Just ensure that every arch sets up the PF_IO_WORKER threads like kthreads in the arch implementation of copy_thread(). Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-22arch: arc: Remove CONFIG_OPROFILE supportViresh Kumar4-36/+0
The "oprofile" user-space tools don't use the kernel OPROFILE support any more, and haven't in a long time. User-space has been converted to the perf interfaces. Remove the old oprofile's architecture specific support. Suggested-by: Christoph Hellwig <hch@infradead.org> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Robert Richter <rric@kernel.org> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: William Cohen <wcohen@redhat.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2021-01-09ARC: [hsdk]: Enable FPU_SAVE_RESTOREVineet Gupta1-0/+1
HSDK has hardware floating point and the common use case is with glibc+hf so enable that as default. Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2021-01-08ARC: unbork 5.11 bootup: fix snafu in _TIF_NOTIFY_SIGNAL handlingVineet Gupta1-1/+1
Linux 5.11.rcX was failing to boot on ARC HSDK board. Turns out we have a couple of issues, this being the first one, and I'm to blame as I didn't pay attention during review. TIF_NOTIFY_SIGNAL support requires checking multiple TIF_* bits in kernel return code path. Old code only needed to check a single bit so BBIT0 <TIF_SIGPENDING> worked. New code needs to check multiple bits so AND <bit-mask> instruction. So needs to use bit mask variant _TIF_SIGPENDING Cc: Jens Axboe <axboe@kernel.dk> Fixes: 53855e12588743ea128 ("arc: add support for TIF_NOTIFY_SIGNAL") Link: https://github.com/foss-for-synopsys-dwc-arc-processors/linux/issues/34 Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2021-01-05arch/arc: add copy_user_page() to <asm/page.h> to fix build error on ARCRandy Dunlap1-0/+1
fs/dax.c uses copy_user_page() but ARC does not provide that interface, resulting in a build error. Provide copy_user_page() in <asm/page.h>. ../fs/dax.c: In function 'copy_cow_page_dax': ../fs/dax.c:702:2: error: implicit declaration of function 'copy_user_page'; did you mean 'copy_to_user_page'? [-Werror=implicit-function-declaration] Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: linux-snps-arc@lists.infradead.org Cc: Dan Williams <dan.j.williams@intel.com> #Acked-by: Vineet Gupta <vgupta@synopsys.com> # v1 Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Jan Kara <jack@suse.cz> Cc: linux-fsdevel@vger.kernel.org Cc: linux-nvdimm@lists.01.org #Reviewed-by: Ira Weiny <ira.weiny@intel.com> # v2 Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2021-01-05Merge tag 'arc-5.11-rc3' of ↵Linus Torvalds2-21/+17
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC updates from Vineet Gupta: "Things are quieter on upstreaming front as we are mostly focusing on ARCv3/ARC64 port. This contains just build system updates from Masahiro Yamada" * tag 'arc-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: build: use $(READELF) instead of hard-coded readelf ARC: build: remove unneeded extra-y ARC: build: move symlink creation to arch/arc/Makefile to avoid race ARC: build: add boot_targets to PHONY ARC: build: add uImage.lzma to the top-level target ARC: build: remove non-existing bootpImage from KBUILD_IMAGE
2020-12-30local64.h: make <asm/local64.h> mandatoryRandy Dunlap1-1/+0
Make <asm-generic/local64.h> mandatory in include/asm-generic/Kbuild and remove all arch/*/include/asm/local64.h arch-specific files since they only #include <asm-generic/local64.h>. This fixes build errors on arch/c6x/ and arch/nios2/ for block/blk-iocost.c. Build-tested on 21 of 25 arch-es. (tools problems on the others) Yes, we could even rename <asm-generic/local64.h> to <linux/local64.h> and change all #includes to use <linux/local64.h> instead. Link: https://lkml.kernel.org/r/20201227024446.17018-1-rdunlap@infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Suggested-by: Christoph Hellwig <hch@infradead.org> Reviewed-by: Masahiro Yamada <masahiroy@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Aurelien Jacquiot <jacquiot.aurelien@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-16Merge tag 'tif-task_work.arch-2020-12-14' of git://git.kernel.dk/linux-blockLinus Torvalds3-3/+6
Pull TIF_NOTIFY_SIGNAL updates from Jens Axboe: "This sits on top of of the core entry/exit and x86 entry branch from the tip tree, which contains the generic and x86 parts of this work. Here we convert the rest of the archs to support TIF_NOTIFY_SIGNAL. With that done, we can get rid of JOBCTL_TASK_WORK from task_work and signal.c, and also remove a deadlock work-around in io_uring around knowing that signal based task_work waking is invoked with the sighand wait queue head lock. The motivation for this work is to decouple signal notify based task_work, of which io_uring is a heavy user of, from sighand. The sighand lock becomes a huge contention point, particularly for threaded workloads where it's shared between threads. Even outside of threaded applications it's slower than it needs to be. Roman Gershman <romger@amazon.com> reported that his networked workload dropped from 1.6M QPS at 80% CPU to 1.0M QPS at 100% CPU after io_uring was changed to use TIF_NOTIFY_SIGNAL. The time was all spent hammering on the sighand lock, showing 57% of the CPU time there [1]. There are further cleanups possible on top of this. One example is TIF_PATCH_PENDING, where a patch already exists to use TIF_NOTIFY_SIGNAL instead. Hopefully this will also lead to more consolidation, but the work stands on its own as well" [1] https://github.com/axboe/liburing/issues/215 * tag 'tif-task_work.arch-2020-12-14' of git://git.kernel.dk/linux-block: (28 commits) io_uring: remove 'twa_signal_ok' deadlock work-around kernel: remove checking for TIF_NOTIFY_SIGNAL signal: kill JOBCTL_TASK_WORK io_uring: JOBCTL_TASK_WORK is no longer used by task_work task_work: remove legacy TWA_SIGNAL path sparc: add support for TIF_NOTIFY_SIGNAL riscv: add support for TIF_NOTIFY_SIGNAL nds32: add support for TIF_NOTIFY_SIGNAL ia64: add support for TIF_NOTIFY_SIGNAL h8300: add support for TIF_NOTIFY_SIGNAL c6x: add support for TIF_NOTIFY_SIGNAL alpha: add support for TIF_NOTIFY_SIGNAL xtensa: add support for TIF_NOTIFY_SIGNAL arm: add support for TIF_NOTIFY_SIGNAL microblaze: add support for TIF_NOTIFY_SIGNAL hexagon: add support for TIF_NOTIFY_SIGNAL csky: add support for TIF_NOTIFY_SIGNAL openrisc: add support for TIF_NOTIFY_SIGNAL sh: add support for TIF_NOTIFY_SIGNAL um: add support for TIF_NOTIFY_SIGNAL ...
2020-12-16Merge tag 'asm-generic-timers-5.11' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic cross-architecture timer cleanup from Arnd Bergmann: "This cleans up two ancient timer features that were never completed in the past, CONFIG_GENERIC_CLOCKEVENTS and CONFIG_ARCH_USES_GETTIMEOFFSET. There was only one user left for the ARCH_USES_GETTIMEOFFSET variant of clocksource implementations, the ARM EBSA110 platform. Rather than changing to use modern timekeeping, we remove the platform entirely as Russell no longer uses his machine and nobody else seems to have one any more. The conditional code for using arch_gettimeoffset() is removed as a result. For CONFIG_GENERIC_CLOCKEVENTS, there are still a couple of platforms not using clockevent drivers: parisc, ia64, most of m68k, and one Arm platform. These all do timer ticks slighly differently, and this gets cleaned up to the point they at least all call the same helper function. Instead of most platforms using 'select GENERIC_CLOCKEVENTS' in Kconfig, the polarity is now reversed, with the few remaining ones selecting LEGACY_TIMER_TICK instead" * tag 'asm-generic-timers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: timekeeping: default GENERIC_CLOCKEVENTS to enabled timekeeping: remove xtime_update m68k: remove timer_interrupt() function m68k: change remaining timers to legacy_timer_tick m68k: m68328: use legacy_timer_tick() m68k: sun3/sun3c: use legacy_timer_tick m68k: split heartbeat out of timer function m68k: coldfire: use legacy_timer_tick() parisc: use legacy_timer_tick ARM: rpc: use legacy_timer_tick ia64: convert to legacy_timer_tick timekeeping: add CONFIG_LEGACY_TIMER_TICK timekeeping: remove arch_gettimeoffset net: remove am79c961a driver ARM: remove ebsa110 platform
2020-12-16Merge tag 'asm-generic-mmu-context-5.11' of ↵Linus Torvalds1-8/+9
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic mmu-context cleanup from Arnd Bergmann: "This is a cleanup series from Nicholas Piggin, preparing for later changes. The asm/mmu_context.h header are generalized and common code moved to asm-gneneric/mmu_context.h. This saves a bit of code and makes it easier to change in the future" * tag 'asm-generic-mmu-context-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (25 commits) h8300: Fix generic mmu_context build m68k: mmu_context: Fix Sun-3 build xtensa: use asm-generic/mmu_context.h for no-op implementations x86: use asm-generic/mmu_context.h for no-op implementations um: use asm-generic/mmu_context.h for no-op implementations sparc: use asm-generic/mmu_context.h for no-op implementations sh: use asm-generic/mmu_context.h for no-op implementations s390: use asm-generic/mmu_context.h for no-op implementations riscv: use asm-generic/mmu_context.h for no-op implementations powerpc: use asm-generic/mmu_context.h for no-op implementations parisc: use asm-generic/mmu_context.h for no-op implementations openrisc: use asm-generic/mmu_context.h for no-op implementations nios2: use asm-generic/mmu_context.h for no-op implementations nds32: use asm-generic/mmu_context.h for no-op implementations mips: use asm-generic/mmu_context.h for no-op implementations microblaze: use asm-generic/mmu_context.h for no-op implementations m68k: use asm-generic/mmu_context.h for no-op implementations ia64: use asm-generic/mmu_context.h for no-op implementations hexagon: use asm-generic/mmu_context.h for no-op implementations csky: use asm-generic/mmu_context.h for no-op implementations ...
2020-12-15Merge branch 'akpm' (patches from Andrew)Linus Torvalds3-11/+41
Merge misc updates from Andrew Morton: - a few random little subsystems - almost all of the MM patches which are staged ahead of linux-next material. I'll trickle to post-linux-next work in as the dependents get merged up. Subsystems affected by this patch series: kthread, kbuild, ide, ntfs, ocfs2, arch, and mm (slab-generic, slab, slub, dax, debug, pagecache, gup, swap, shmem, memcg, pagemap, mremap, hmm, vmalloc, documentation, kasan, pagealloc, memory-failure, hugetlb, vmscan, z3fold, compaction, oom-kill, migration, cma, page-poison, userfaultfd, zswap, zsmalloc, uaccess, zram, and cleanups). * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (200 commits) mm: cleanup kstrto*() usage mm: fix fall-through warnings for Clang mm: slub: convert sysfs sprintf family to sysfs_emit/sysfs_emit_at mm: shmem: convert shmem_enabled_show to use sysfs_emit_at mm:backing-dev: use sysfs_emit in macro defining functions mm: huge_memory: convert remaining use of sprintf to sysfs_emit and neatening mm: use sysfs_emit for struct kobject * uses mm: fix kernel-doc markups zram: break the strict dependency from lzo zram: add stat to gather incompressible pages since zram set up zram: support page writeback mm/process_vm_access: remove redundant initialization of iov_r mm/zsmalloc.c: rework the list_add code in insert_zspage() mm/zswap: move to use crypto_acomp API for hardware acceleration mm/zswap: fix passing zero to 'PTR_ERR' warning mm/zswap: make struct kernel_param_ops definitions const userfaultfd/selftests: hint the test runner on required privilege userfaultfd/selftests: fix retval check for userfaultfd_open() userfaultfd/selftests: always dump something in modes userfaultfd: selftests: make __{s,u}64 format specifiers portable ...
2020-12-15arc: use FLATMEM with freeing of unused memory map instead of DISCONTIGMEMMike Rapoport3-11/+41
Currently ARC uses DISCONTIGMEM to cope with sparse physical memory address space on systems with 2 memory banks. While DISCONTIGMEM avoids wasting memory on unpopulated memory map, it adds both memory and CPU overhead relatively to FLATMEM. Moreover, DISCONTINGMEM is generally considered deprecated. The obvious replacement for DISCONTIGMEM would be SPARSEMEM, but it is also less efficient than FLATMEM in pfn_to_page() and page_to_pfn() conversions. Besides it requires tuning of SECTION_SIZE which is not trivial for possible ARC memory configuration. Since the memory map for both banks is always allocated from the "lowmem" bank, it is possible to use FLATMEM for two-bank configuration and simply free the unused hole in the memory map. All is required for that is to provide ARC-specific pfn_valid() that will take into account actual physical memory configuration and define HAVE_ARCH_PFN_VALID. The resulting kernel image configured with defconfig + HIGHMEM=y is smaller: $ size a/vmlinux b/vmlinux text data bss dec hex filename 4673503 1245456 279756 6198715 5e95bb a/vmlinux 4658706 1246864 279756 6185326 5e616e b/vmlinux $ ./scripts/bloat-o-meter a/vmlinux b/vmlinux add/remove: 28/30 grow/shrink: 42/399 up/down: 10986/-29025 (-18039) ... Total: Before=4709315, After = 4691276, chg -0.38% Booting nSIM with haps_ns.dts results in the following memory usage reports: a: Memory: 1559104K/1572864K available (3531K kernel code, 595K rwdata, 752K rodata, 136K init, 275K bss, 13760K reserved, 0K cma-reserved, 1048576K highmem) b: Memory: 1559112K/1572864K available (3519K kernel code, 594K rwdata, 752K rodata, 136K init, 280K bss, 13752K reserved, 0K cma-reserved, 1048576K highmem) Link: https://lkml.kernel.org/r/20201101170454.9567-11-rppt@kernel.org Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matt Turner <mattst88@gmail.com> Cc: Meelis Roos <mroos@linux.ee> Cc: Michael Schmitz <schmitzmic@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15Merge tag 'core-mm-2020-12-14' of ↵Linus Torvalds4-69/+26
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull kmap updates from Thomas Gleixner: "The new preemtible kmap_local() implementation: - Consolidate all kmap_atomic() internals into a generic implementation which builds the base for the kmap_local() API and make the kmap_atomic() interface wrappers which handle the disabling/enabling of preemption and pagefaults. - Switch the storage from per-CPU to per task and provide scheduler support for clearing mapping when scheduling out and restoring them when scheduling back in. - Merge the migrate_disable/enable() code, which is also part of the scheduler pull request. This was required to make the kmap_local() interface available which does not disable preemption when a mapping is established. It has to disable migration instead to guarantee that the virtual address of the mapped slot is the same across preemption. - Provide better debug facilities: guard pages and enforced utilization of the mapping mechanics on 64bit systems when the architecture allows it. - Provide the new kmap_local() API which can now be used to cleanup the kmap_atomic() usage sites all over the place. Most of the usage sites do not require the implicit disabling of preemption and pagefaults so the penalty on 64bit and 32bit non-highmem systems is removed and quite some of the code can be simplified. A wholesale conversion is not possible because some usage depends on the implicit side effects and some need to be cleaned up because they work around these side effects. The migrate disable side effect is only effective on highmem systems and when enforced debugging is enabled. On 64bit and 32bit non-highmem systems the overhead is completely avoided" * tag 'core-mm-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits) ARM: highmem: Fix cache_is_vivt() reference x86/crashdump/32: Simplify copy_oldmem_page() io-mapping: Provide iomap_local variant mm/highmem: Provide kmap_local* sched: highmem: Store local kmaps in task struct x86: Support kmap_local() forced debugging mm/highmem: Provide CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP mm/highmem: Provide and use CONFIG_DEBUG_KMAP_LOCAL microblaze/mm/highmem: Add dropped #ifdef back xtensa/mm/highmem: Make generic kmap_atomic() work correctly mm/highmem: Take kmap_high_get() properly into account highmem: High implementation details and document API Documentation/io-mapping: Remove outdated blurb io-mapping: Cleanup atomic iomap mm/highmem: Remove the old kmap_atomic cruft highmem: Get rid of kmap_types.h xtensa/mm/highmem: Switch to generic kmap atomic sparc/mm/highmem: Switch to generic kmap atomic powerpc/mm/highmem: Switch to generic kmap atomic nds32/mm/highmem: Switch to generic kmap atomic ...
2020-12-02ARC: build: use $(READELF) instead of hard-coded readelfMasahiro Yamada1-1/+1
The top Makefile defines READELF as the readelf in the cross-toolchains. Use it rather than the host readelf. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2020-12-02ARC: build: remove unneeded extra-yMasahiro Yamada1-4/+3
Adding vmlinux.* to extra-y has no point because we expect they are built on demand while building uImage.* Add them to 'targets' is enough to include the corresponding .cmd file. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2020-12-02ARC: build: move symlink creation to arch/arc/Makefile to avoid raceMasahiro Yamada2-11/+13
If you run 'make uImage uImage.gz' with the parallel option, uImage.gz will be created by two threads simultaneously. This is because arch/arc/Makefile does not specify the dependency between uImage and uImage.gz. Hence, GNU Make assumes they can be built in parallel. One thread descends into arch/arc/boot/ to create uImage, and another to create uImage.gz. Please notice the same log is displayed twice in the following steps: $ export CROSS_COMPILE=<your-arc-compiler-prefix> $ make -s ARCH=arc defconfig $ make -j$(nproc) ARCH=arc uImage uImage.gz [ snip ] LD vmlinux SORTTAB vmlinux SYSMAP System.map OBJCOPY arch/arc/boot/vmlinux.bin OBJCOPY arch/arc/boot/vmlinux.bin GZIP arch/arc/boot/vmlinux.bin.gz GZIP arch/arc/boot/vmlinux.bin.gz UIMAGE arch/arc/boot/uImage.gz UIMAGE arch/arc/boot/uImage.gz Image Name: Linux-5.10.0-rc4-00003-g62f23044 Created: Sun Nov 22 02:52:26 2020 Image Type: ARC Linux Kernel Image (gzip compressed) Data Size: 2109376 Bytes = 2059.94 KiB = 2.01 MiB Load Address: 80000000 Entry Point: 80004000 Image arch/arc/boot/uImage is ready Image Name: Linux-5.10.0-rc4-00003-g62f23044 Created: Sun Nov 22 02:52:26 2020 Image Type: ARC Linux Kernel Image (gzip compressed) Data Size: 2815455 Bytes = 2749.47 KiB = 2.69 MiB Load Address: 80000000 Entry Point: 80004000 This is a race between the two threads trying to write to the same file arch/arc/boot/uImage.gz. This is a potential problem that can generate a broken file. I fixed a similar problem for ARM by commit 3939f3345050 ("ARM: 8418/1: add boot image dependencies to not generate invalid images"). I highly recommend to avoid such build rules that cause a race condition. Move the uImage rule to arch/arc/Makefile. Another strangeness is that arch/arc/boot/Makefile compares the timestamps between $(obj)/uImage and $(obj)/uImage.*: $(obj)/uImage: $(obj)/uImage.$(suffix-y) @ln -sf $(notdir $<) $@ @echo ' Image $@ is ready' This does not work as expected since $(obj)/uImage is a symlink. The symlink should be created in a phony target rule. I used $(kecho) instead of echo to suppress the message 'Image arch/arc/boot/uImage is ready' when the -s option is given. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2020-12-02ARC: build: add boot_targets to PHONYMasahiro Yamada1-0/+1
The top-level boot_targets (uImage and uImage.*) should be phony targets. They just let Kbuild descend into arch/arc/boot/ and create files there. If a file exists in the top directory with the same name, the boot image will not be created. You can confirm it by the following steps: $ export CROSS_COMPILE=<your-arc-compiler-prefix> $ make -s ARCH=arc defconfig all # vmlinux will be built $ touch uImage.gz $ make ARCH=arc uImage.gz CALL scripts/atomic/check-atomics.sh CALL scripts/checksyscalls.sh CHK include/generated/compile.h # arch/arc/boot/uImage.gz is not created Specify the targets as PHONY to fix this. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2020-12-02ARC: build: add uImage.lzma to the top-level targetMasahiro Yamada1-1/+1
arch/arc/boot/Makefile supports uImage.lzma, but you cannot do 'make uImage.lzma' because the corresponding target is missing in arch/arc/Makefile. Add it. I also changed the assignment operator '+=' to ':=' since this is the only place where we expect this variable to be set. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2020-12-02ARC: build: remove non-existing bootpImage from KBUILD_IMAGEMasahiro Yamada1-6/+0
The deb-pkg builds for ARCH=arc fail. $ export CROSS_COMPILE=<your-arc-compiler-prefix> $ make -s ARCH=arc defconfig $ make ARCH=arc bindeb-pkg SORTTAB vmlinux SYSMAP System.map MODPOST Module.symvers make KERNELRELEASE=5.10.0-rc4 ARCH=arc KBUILD_BUILD_VERSION=2 -f ./Makefile intdeb-pkg sh ./scripts/package/builddeb cp: cannot stat 'arch/arc/boot/bootpImage': No such file or directory make[4]: *** [scripts/Makefile.package:87: intdeb-pkg] Error 1 make[3]: *** [Makefile:1527: intdeb-pkg] Error 2 make[2]: *** [debian/rules:13: binary-arch] Error 2 dpkg-buildpackage: error: debian/rules binary subprocess returned exit status 2 make[1]: *** [scripts/Makefile.package:83: bindeb-pkg] Error 2 make: *** [Makefile:1527: bindeb-pkg] Error 2 The reason is obvious; arch/arc/Makefile sets $(boot)/bootpImage as the default image, but there is no rule to build it. Remove the meaningless KBUILD_IMAGE assignment so it will fallback to the default vmlinux. With this change, you can build the deb package. I removed the 'bootpImage' target as well. At best, it provides 'make bootpImage' as an alias of 'make vmlinux', but I do not see much sense in doing so. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2020-11-28Merge tag 'asm-generic-fixes-5.10-2' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic fix from Arnd Bergmann: "Add correct MAX_POSSIBLE_PHYSMEM_BITS setting to asm-generic. This is a single bugfix for a bug that Stefan Agner found on 32-bit Arm, but that exists on several other architectures" * tag 'asm-generic-fixes-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: arch: pgtable: define MAX_POSSIBLE_PHYSMEM_BITS where needed
2020-11-18ARC: stack unwinding: reorganize how initial register state setupVineet Gupta1-19/+18
This is a non-functional change, if anything a better fall-back handling. Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2020-11-18ARC: stack unwinding: don't assume non-current task is sleepingVineet Gupta1-8/+15
To start stack unwinding (SP, PC and BLINK) are needed. When the explicit execution context (pt_regs etc) is not available, unwinder assumes the task is sleeping (in __switch_to()) and fetches SP and BLINK from kernel mode stack. But this assumption is not true, specially in a SMP system, when top runs on 1 core, there may be active running processes on all cores. So when unwinding non courrent tasks, ensure they are NOT running. And while at it, handle the self unwinding case explicitly. This came out of investigation of a customer reported hang with rcutorture+top Link: https://github.com/foss-for-synopsys-dwc-arc-processors/linux/issues/31 Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2020-11-18ARC: mm: fix spelling mistakesFlavio Suligoi1-12/+12
Signed-off-by: Flavio Suligoi <f.suligoi@asem.it> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2020-11-18ARC: bitops: Remove unecessary operation and valueGustavo Pimentel1-3/+1
The 1-bit shift rotation to the left on x variable located on 4 last if statement can be removed because the computed value is will not be used afront. Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2020-11-16arch: pgtable: define MAX_POSSIBLE_PHYSMEM_BITS where neededArnd Bergmann1-0/+2
Stefan Agner reported a bug when using zsram on 32-bit Arm machines with RAM above the 4GB address boundary: Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = a27bd01c [00000000] *pgd=236a0003, *pmd=1ffa64003 Internal error: Oops: 207 [#1] SMP ARM Modules linked in: mdio_bcm_unimac(+) brcmfmac cfg80211 brcmutil raspberrypi_hwmon hci_uart crc32_arm_ce bcm2711_thermal phy_generic genet CPU: 0 PID: 123 Comm: mkfs.ext4 Not tainted 5.9.6 #1 Hardware name: BCM2711 PC is at zs_map_object+0x94/0x338 LR is at zram_bvec_rw.constprop.0+0x330/0xa64 pc : [<c0602b38>] lr : [<c0bda6a0>] psr: 60000013 sp : e376bbe0 ip : 00000000 fp : c1e2921c r10: 00000002 r9 : c1dda730 r8 : 00000000 r7 : e8ff7a00 r6 : 00000000 r5 : 02f9ffa0 r4 : e3710000 r3 : 000fdffe r2 : c1e0ce80 r1 : ebf979a0 r0 : 00000000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 30c5383d Table: 235c2a80 DAC: fffffffd Process mkfs.ext4 (pid: 123, stack limit = 0x495a22e6) Stack: (0xe376bbe0 to 0xe376c000) As it turns out, zsram needs to know the maximum memory size, which is defined in MAX_PHYSMEM_BITS when CONFIG_SPARSEMEM is set, or in MAX_POSSIBLE_PHYSMEM_BITS on the x86 architecture. The same problem will be hit on all 32-bit architectures that have a physical address space larger than 4GB and happen to not enable sparsemem and include asm/sparsemem.h from asm/pgtable.h. After the initial discussion, I suggested just always defining MAX_POSSIBLE_PHYSMEM_BITS whenever CONFIG_PHYS_ADDR_T_64BIT is set, or provoking a build error otherwise. This addresses all configurations that can currently have this runtime bug, but leaves all other configurations unchanged. I looked up the possible number of bits in source code and datasheets, here is what I found: - on ARC, CONFIG_ARC_HAS_PAE40 controls whether 32 or 40 bits are used - on ARM, CONFIG_LPAE enables 40 bit addressing, without it we never support more than 32 bits, even though supersections in theory allow up to 40 bits as well. - on MIPS, some MIPS32r1 or later chips support 36 bits, and MIPS32r5 XPA supports up to 60 bits in theory, but 40 bits are more than anyone will ever ship - On PowerPC, there are three different implementations of 36 bit addressing, but 32-bit is used without CONFIG_PTE_64BIT - On RISC-V, the normal page table format can support 34 bit addressing. There is no highmem support on RISC-V, so anything above 2GB is unused, but it might be useful to eventually support CONFIG_ZRAM for high pages. Fixes: 61989a80fb3a ("staging: zsmalloc: zsmalloc memory allocation library") Fixes: 02390b87a945 ("mm/zsmalloc: Prepare to variable MAX_PHYSMEM_BITS") Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Reviewed-by: Stefan Agner <stefan@agner.ch> Tested-by: Stefan Agner <stefan@agner.ch> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Link: https://lore.kernel.org/linux-mm/bdfa44bf1c570b05d6c70898e2bbb0acf234ecdf.1604762181.git.stefan@agner.ch/ Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-09arc: add support for TIF_NOTIFY_SIGNALJens Axboe3-3/+6
Wire up TIF_NOTIFY_SIGNAL handling for arc. Cc: linux-snps-arc@lists.infradead.org Acked-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-11-07arc/mm/highmem: Use generic kmap atomic implementationThomas Gleixner4-69/+26
Adopt the map ordering to match the other architectures and the generic code. Also make the maximum entries limited and not dependend on the number of CPUs. With the original implementation did the following calculation: nr_slots = mapsize >> PAGE_SHIFT; The results in either 512 or 1024 total slots depending on configuration. The total slots have to be divided by the number of CPUs to get the number of slots per CPU (former KM_TYPE_NR). ARC supports up to 4k CPUs, so this just falls apart in random ways depending on the number of CPUs and the actual kmap (atomic) nesting. The comment in highmem.c: * - fixmap anyhow needs a limited number of mappings. So 2M kvaddr == 256 PTE * slots across NR_CPUS would be more than sufficient (generic code defines * KM_TYPE_NR as 20). is just wrong. KM_TYPE_NR (now KM_MAX_IDX) is the number of slots per CPU because kmap_local/atomic() needs to support nested mappings (thread, softirq, interrupt). While KM_MAX_IDX might be overestimated, the above reasoning is just wrong and clearly the highmem code was never tested with any system with more than a few CPUs. Use the default number of slots and fail the build when it does not fit. Randomly failing at runtime is not a really good option. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20201103095857.472289952@linutronix.de
2020-11-02ARC: [plat-hsdk] Remap CCMs super early in asm boot trampolineVineet Gupta2-18/+16
ARC HSDK platform stopped booting on released v5.10-rc1, getting stuck in startup of non master SMP cores. This was bisected to upstream commit 7fef431be9c9ac25 "(mm/page_alloc: place pages to tail in __free_pages_core())" That commit itself is harmless, it just exposed a subtle assumption in our platform code (hence CC'ing linux-mm just as FYI in case some other arches / platforms trip on it). The upstream commit is semantically disruptive as it reverses the order of page allocations (actually it can be good test for hardware verification to exercise different memory patterns altogether). For ARC HSDK platform that meant a remapped memory region (pertaining to unused Closely Coupled Memory) started getting used early for dynamice allocations, while not effectively remapped on all the cores, triggering memory error exception on those cores. The fix is to move the CCM remapping from early platform code to to early core boot code. And while it is undesirable to riddle common boot code with platform quirks, there is no other way to do this since the faltering code involves setting up stack itself so even function calls are not allowed at that point. If anyone is interested, all the gory details can be found at Link below. Link: https://github.com/foss-for-synopsys-dwc-arc-processors/linux/issues/32 Cc: David Hildenbrand <david@redhat.com> Cc: linux-mm@kvack.org Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2020-11-02ARC: stack unwinding: avoid indefinite loopingVineet Gupta1-1/+6
Currently stack unwinder is a while(1) loop which relies on the dwarf unwinder to signal termination, which in turn relies on dwarf info to do so. This in theory could cause an infinite loop if the dwarf info was somehow messed up or the register contents were etc. This fix thus detects the excessive looping and breaks the loop. | Mem: 26184K used, 1009136K free, 0K shrd, 0K buff, 14416K cached | CPU: 0.0% usr 72.8% sys 0.0% nic 27.1% idle 0.0% io 0.0% irq 0.0% sirq | Load average: 4.33 2.60 1.11 2/74 139 | PID PPID USER STAT VSZ %VSZ CPU %CPU COMMAND | 133 2 root SWN 0 0.0 3 22.9 [rcu_torture_rea] | 132 2 root SWN 0 0.0 0 22.0 [rcu_torture_rea] | 131 2 root SWN 0 0.0 3 21.5 [rcu_torture_rea] | 126 2 root RW 0 0.0 2 5.4 [rcu_torture_wri] | 129 2 root SWN 0 0.0 0 0.2 [rcu_torture_fak] | 137 2 root SW 0 0.0 0 0.2 [rcu_torture_cbf] | 127 2 root SWN 0 0.0 0 0.1 [rcu_torture_fak] | 138 115 root R 1464 0.1 2 0.1 top | 130 2 root SWN 0 0.0 0 0.1 [rcu_torture_fak] | 128 2 root SWN 0 0.0 0 0.1 [rcu_torture_fak] | 115 1 root S 1472 0.1 1 0.0 -/bin/sh | 104 1 root S 1464 0.1 0 0.0 inetd | 1 0 root S 1456 0.1 2 0.0 init | 78 1 root S 1456 0.1 0 0.0 syslogd -O /var/log/messages | 134 2 root SW 0 0.0 2 0.0 [rcu_torture_sta] | 10 2 root IW 0 0.0 1 0.0 [rcu_preempt] | 88 2 root IW 0 0.0 1 0.0 [kworker/1:1-eve] | 66 2 root IW 0 0.0 2 0.0 [kworker/2:2-eve] | 39 2 root IW 0 0.0 2 0.0 [kworker/2:1-eve] | unwinder looping too long, aborting ! Cc: <stable@vger.kernel.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2020-10-30timekeeping: default GENERIC_CLOCKEVENTS to enabledArnd Bergmann1-1/+0
Almost all machines use GENERIC_CLOCKEVENTS, so it feels wrong to require each one to select that symbol manually. Instead, enable it whenever CONFIG_LEGACY_TIMER_TICK is disabled as a simplification. It should be possible to select both GENERIC_CLOCKEVENTS and LEGACY_TIMER_TICK from an architecture now and decide at runtime between the two. For the clockevents arch-support.txt file, this means that additional architectures are marked as TODO when they have at least one machine that still uses LEGACY_TIMER_TICK, rather than being marked 'ok' when at least one machine has been converted. This means that both m68k and arm (for riscpc) revert to TODO. At this point, we could just always enable CONFIG_GENERIC_CLOCKEVENTS rather than leaving it off when not needed. I built an m68k defconfig kernel (using gcc-10.1.0) and found that this would add around 5.5KB in kernel image size: text data bss dec hex filename 3861936 1092236 196656 5150828 4e986c obj-m68k/vmlinux-no-clockevent 3866201 1093832 196184 5156217 4ead79 obj-m68k/vmlinux-clockevent On Arm (MACH_RPC), that difference appears to be twice as large, around 11KB on top of an 6MB vmlinux. Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-10-26arc: use asm-generic/mmu_context.h for no-op implementationsNicholas Piggin1-8/+9
Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: linux-snps-arc@lists.infradead.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-10-26treewide: Convert macro and uses of __section(foo) to __section("foo")Joe Perches3-6/+6
Use a more generic form for __section that requires quotes to avoid complications with clang and gcc differences. Remove the quote operator # from compiler_attributes.h __section macro. Convert all unquoted __section(foo) uses to quoted __section("foo"). Also convert __attribute__((section("foo"))) uses to __section("foo") even if the __attribute__ has multiple list entry forms. Conversion done using the script at: https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com> Reviewed-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-23Merge tag 'arch-cleanup-2020-10-22' of git://git.kernel.dk/linux-blockLinus Torvalds1-1/+1
Pull arch task_work cleanups from Jens Axboe: "Two cleanups that don't fit other categories: - Finally get the task_work_add() cleanup done properly, so we don't have random 0/1/false/true/TWA_SIGNAL confusing use cases. Updates all callers, and also fixes up the documentation for task_work_add(). - While working on some TIF related changes for 5.11, this TIF_NOTIFY_RESUME cleanup fell out of that. Remove some arch duplication for how that is handled" * tag 'arch-cleanup-2020-10-22' of git://git.kernel.dk/linux-block: task_work: cleanup notification modes tracehook: clear TIF_NOTIFY_RESUME in tracehook_notify_resume()
2020-10-23Merge tag 'arc-5.10-rc1-fixes' of ↵Linus Torvalds1-9/+18
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC fix from Vineet Gupta: "I found a snafu in perf driver which made it into 5.9-rc4 and the fix should go in now than wait" * tag 'arc-5.10-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: perf: redo the pct irq missing in device-tree handling
2020-10-22ARC: perf: redo the pct irq missing in device-tree handlingVineet Gupta1-9/+18
commit feb92d7d3813456c11dce21 "(ARC: perf: don't bail setup if pct irq missing in device-tree)" introduced a silly brown-paper bag bug: The assignment and comparison in an if statement were not bracketed correctly leaving the order of evaluation undefined. | | if (has_interrupts && (irq = platform_get_irq(pdev, 0) >= 0)) { | ^^^ ^^^^ And given such a chance, the compiler will bite you hard, fully entitled to generating this piece of beauty: | | # if (has_interrupts && (irq = platform_get_irq(pdev, 0) >= 0)) { | | bl.d @platform_get_irq <-- irq returned in r0 | | setge r2, r0, 0 <-- r2 is bool 1 or 0 if irq >= 0 true/false | brlt.d r0, 0, @.L114 | | st_s r2,[sp] <-- irq saved is bool 1 or 0, not actual return val | st 1,[r3,160] # arc_pmu.18_29->irq <-- drops bool and assumes 1 | | # return __request_percpu_irq(irq, handler, 0, | | bl.d @__request_percpu_irq; | mov_s r0,1 <-- drops even bool and assumes 1 which fails With the snafu fixed, everything is as expected. | bl.d @platform_get_irq <-- returns irq in r0 | | mov_s r2,r0 | brlt.d r2, 0, @.L112 | | st_s r0,[sp] <-- irq isaved is actual return value above | st r0,[r13,160] #arc_pmu.18_27->irq | | bl.d @__request_percpu_irq <-- r0 unchanged so actual irq returned | add r4,r4,r12 #, tmp363, __ptr Cc: <stable@vger.kernel.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2020-10-22Merge branch 'work.set_fs' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull initial set_fs() removal from Al Viro: "Christoph's set_fs base series + fixups" * 'work.set_fs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: Allow a NULL pos pointer to __kernel_read fs: Allow a NULL pos pointer to __kernel_write powerpc: remove address space overrides using set_fs() powerpc: use non-set_fs based maccess routines x86: remove address space overrides using set_fs() x86: make TASK_SIZE_MAX usable from assembly code x86: move PAGE_OFFSET, TASK_SIZE & friends to page_{32,64}_types.h lkdtm: remove set_fs-based tests test_bitmap: remove user bitmap tests uaccess: add infrastructure for kernel builds with set_fs() fs: don't allow splice read/write without explicit ops fs: don't allow kernel reads and writes without iter ops sysctl: Convert to iter interfaces proc: add a read_iter method to proc proc_ops proc: cleanup the compat vs no compat file ops proc: remove a level of indentation in proc_get_inode
2020-10-20Merge tag 'arc-5.10-rc1' of ↵Linus Torvalds35-1355/+15
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC updates from Vineet Gupta: "The bulk of ARC pull request is removal of EZChip NPS platform which was suffering from constant bitrot. In recent years EZChip has gone though multiple successive acquisitions and I guess things and people move on. I would like to take this opportunity to recognize and thank all those good folks (Gilad, Noam, Ofer...) for contributing major bits to ARC port (SMP, Big Endian). Summary: - drop support for EZChip NPS platform - misc other fixes" * tag 'arc-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: arc: include/asm: fix typos of "themselves" ARC: SMP: fix typo and use "come up" instead of "comeup" ARC: [dts] fix the errors detected by dtbs_check arc: plat-hsdk: fix kconfig dependency warning when !RESET_CONTROLLER ARC: [plat-eznps]: Drop support for EZChip NPS platform
2020-10-18tracehook: clear TIF_NOTIFY_RESUME in tracehook_notify_resume()Jens Axboe1-1/+1
All the callers currently do this, clean it up and move the clearing into tracehook_notify_resume() instead. Reviewed-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-16Merge tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds1-1/+1
Pull dma-mapping updates from Christoph Hellwig: - rework the non-coherent DMA allocator - move private definitions out of <linux/dma-mapping.h> - lower CMA_ALIGNMENT (Paul Cercueil) - remove the omap1 dma address translation in favor of the common code - make dma-direct aware of multiple dma offset ranges (Jim Quinlan) - support per-node DMA CMA areas (Barry Song) - increase the default seg boundary limit (Nicolin Chen) - misc fixes (Robin Murphy, Thomas Tai, Xu Wang) - various cleanups * tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping: (63 commits) ARM/ixp4xx: add a missing include of dma-map-ops.h dma-direct: simplify the DMA_ATTR_NO_KERNEL_MAPPING handling dma-direct: factor out a dma_direct_alloc_from_pool helper dma-direct check for highmem pages in dma_direct_alloc_pages dma-mapping: merge <linux/dma-noncoherent.h> into <linux/dma-map-ops.h> dma-mapping: move large parts of <linux/dma-direct.h> to kernel/dma dma-mapping: move dma-debug.h to kernel/dma/ dma-mapping: remove <asm/dma-contiguous.h> dma-mapping: merge <linux/dma-contiguous.h> into <linux/dma-map-ops.h> dma-contiguous: remove dma_contiguous_set_default dma-contiguous: remove dev_set_cma_area dma-contiguous: remove dma_declare_contiguous dma-mapping: split <linux/dma-mapping.h> cma: decrease CMA_ALIGNMENT lower limit to 2 firewire-ohci: use dma_alloc_pages dma-iommu: implement ->alloc_noncoherent dma-mapping: add new {alloc,free}_noncoherent dma_map_ops methods dma-mapping: add a new dma_alloc_pages API dma-mapping: remove dma_cache_sync 53c700: convert to dma_alloc_noncoherent ...
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-15 19:48:52 +0300