Age | Commit message (Collapse) | Author | Files | Lines |
|
Pull OpenRISC updates from Stafford Horne:
- Support for cacheinfo API to expose OpenRISC cache info via sysfs,
this also translated to some cleanups to OpenRISC cache flush and
invalidate API's
- Documentation updates for new mailing list and toolchain binaries
* tag 'for-linus' of https://github.com/openrisc/linux:
Documentation: openrisc: Update toolchain binaries URL
Documentation: openrisc: Update mailing list
openrisc: Add cacheinfo support
openrisc: Introduce new utility functions to flush and invalidate caches
openrisc: Refactor struct cpuinfo_or1k to reduce duplication
|
|
The MHI registers are present in IPQ5332, IPQ6018, IPQ8074 and IPQ9574
SoCs. Hence, add the MHI registers to the binding to allow these registers
to be defined in devicetree.
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
[mani: commit message rewording]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250317100029.881286-2-quic_varada@quicinc.com
|
|
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
Renesas MSIOF can work as both SPI and I2S.
Current Linux supports MSIOF-SPI. This patch-set adds new MSIOF-I2S.
Because it is using same HW-IP, we want to share same compatible for both
MSIOF-SPI/I2S case. MSIOF-I2S (Sound) will use Audio-Graph-Card/Card2 which
uses Of-Graph, but MSIOF-SPI is not use Of-Graph.
So, this patch-set assumes it was used as MSIOF-I2S if DT is using Of-Graph,
otherwise, it is MSIOF-SPI (This assumption will works if SPI *never*
use Of-Graph in the future).
One note so far is that it is using "spi@xxx" node name for both
MSIOF-SPI/I2S. DTC will automatically checks "spi@xxx" node as SPI device
which requests #address-cells/#size-cells. But is not needed for I2S.
So we will get warning about it on Sparrow Hawk which uses MSIOF-I2S.
We have no solution about it, so far.
Link: https://lore.kernel.org/r/87zfgi1a5a.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/87h62vh5mj.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/875xjeb0wu.wl-kuninori.morimoto.gx@renesas.com
|
|
Renesas MSIOF (Clock-Synchronized Serial Interface with FIFO) can work as
both SPI and I2S. MSIOF-I2S will use Audio Graph Card/Card2 driver which
uses Of-Graph in DT.
MSIOF-SPI/I2S are using same DT compatible properties.
MSIOF-I2S uses Of-Graph for Audio-Graph-Card/Card2,
MSIOF-SPI doesn't use Of-Graph.
Adds schema for MSIOF-I2S (= Sound).
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://patch.msgid.link/87zfge2x0u.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Pull bpf fixes from Alexei Starovoitov:
- Add namespace to BPF internal symbols (Alexei Starovoitov)
- Fix possible endless loop in BPF map iteration (Brandon Kammerdiener)
- Fix compilation failure for samples/bpf on LoongArch (Haoran Jiang)
- Disable a part of sockmap_ktls test (Ihor Solodrai)
- Correct typo in __clang_major__ macro (Peilin Ye)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Correct typo in __clang_major__ macro
samples/bpf: Fix compilation failure for samples/bpf on LoongArch Fedora
bpf: Add namespace to BPF internal symbols
selftests/bpf: add test for softlock when modifying hashmap while iterating
bpf: fix possible endless loop in BPF map iteration
selftests/bpf: Mitigate sockmap_ktls disconnect_after_delete failure
|
|
Add devicetree bindings for the AM68x based phyCORE-AM68x/TDA4x SoM
and the phyBOARD-Izar carrier board.
Signed-off-by: Dominik Haller <d.haller@phytec.de>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250423133635.29897-1-d.haller@phytec.de
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
Add the child nodes that can be found under this node. Then as done
for other similar devices (J7200 and J721s2) add support for the AM654
system controller to this binding.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250421214620.3770172-2-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc driver fixes to resolve reported
problems for 6.15-rc4. Included in here are:
- misc chrdev region range fix reported by many people
- nvmem driver fixes and dt updates
- mei new device id and fixes
- comedi driver fix
- pps driver fix
- binder debug log fix
- pci1xxxx driver fixes
- firmware driver fix
All of these have been in linux-next for over a week with no reported
issues"
* tag 'char-misc-6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (25 commits)
firmware: stratix10-svc: Add of_platform_default_populate()
mei: vsc: Use struct vsc_tp_packet as vsc-tp tx_buf and rx_buf type
mei: vsc: Fix fortify-panic caused by invalid counted_by() use
pps: generators: tio: fix platform_set_drvdata()
mcb: fix a double free bug in chameleon_parse_gdd()
misc: microchip: pci1xxxx: Fix incorrect IRQ status handling during ack
misc: microchip: pci1xxxx: Fix Kernel panic during IRQ handler registration
char: misc: register chrdev region with all possible minors
mei: me: add panther lake H DID
comedi: jr3_pci: Fix synchronous deletion of timer
binder: fix offset calculation in debug log
intel_th: avoid using deprecated page->mapping, index fields
dt-bindings: nvmem: Add compatible for MSM8960
dt-bindings: nvmem: Add compatible for IPQ5018
nvmem: qfprom: switch to 4-byte aligned reads
nvmem: core: update raw_len if the bit reading is required
nvmem: core: verify cell's raw_len
nvmem: core: fix bit offsets of more than one byte
dt-bindings: nvmem: fixed-cell: increase bits start value to 31
dt-bindings: nvmem: Add compatible for MS8937
...
|
|
Pull xfs fixes from Carlos Maiolino:
"This contains a fix for a build failure on some 32-bit architectures
and a warning generating docs"
* tag 'xfs-fixes-6.15-rc4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: remove duplicate Zoned Filesystems sections in admin-guide
XFS: fix zoned gc threshold math for 32-bit arches
|
|
Add namespace to BPF internal symbols used by light skeleton
to prevent abuse and document with the code their allowed usage.
Fixes: b1d18a7574d0 ("bpf: Extend sys_bpf commands for bpf_syscall programs.")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20250425014542.62385-1-alexei.starovoitov@gmail.com
|
|
These are already used in device trees, so describe them here. As the
driver only declares up through Tegra210, these must use a fallback
compatible of tegra210-cec.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Add some basic info about the HW/driver + contact info.
Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
With commit dcbb01fbb7ae ("x86/pci: Remove old STA2x11 support"), the
STA2X11 Video Input Port driver is not needed and cannot be built anymore.
Remove the driver and its reference in media documentation.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Sophgo SG2042 ships an SPI controller [1] compatible with the Synopsys
DW-SPI IP. Add SoC-specific compatible string and use the generic one
as fallback.
Link: https://github.com/sophgo/sophgo-doc/blob/main/SG2042/TRM/source/SPI.rst [1]
Signed-off-by: Zixian Zeng <sycamoremoon376@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250425-sfg-spi-v6-2-2dbe7bb46013@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Microsemi Ocelot/Jaguar2, Renesas RZ/N1 and T-HEAD TH1520
SoC-specific compatibles, which eventually fallback to the
generic DW ssi compatible, it's better to combine them in single entry
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Zixian Zeng <sycamoremoon376@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250425-sfg-spi-v6-1-2dbe7bb46013@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Building DTB overlays from .dts files is no longer supported.
Update the documentation to reflect this.
Fixes: 81d362732bac05f6 ("kbuild: Disallow DTB overlays to built from .dts named source files")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Andrew Davis <afd@ti.com>
Reviewed-by: Yanteng Si <siyanteng@loongson.cn>
Link: https://lore.kernel.org/r/ebce4d9591dd0259a636196dda31d40901dc04b0.1738752288.git.geert+renesas@glider.be
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Amlogic S6/S7/7D SoCs uses the same UART controller as S4 SoCs and G12A.
There is no need for an extra compatible line in the driver, but
add S6/S7/S7D compatible line for documentation.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://lore.kernel.org/r/20250424-uart-binding-v1-1-eb0f6d97a654@amlogic.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a compatible string for the MediaTek Dimensity 1200 (MT6893)
SoC, which UART IPs are fully compatible with MT6577.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250416120241.147925-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The ref /schemas/graph.yaml#/properties/port forbids extra properties
which might be specified in subschemas, e.g. like in
usb/fcs,fsa4480.yaml.
Switch to port-base (and specify the endpoint with properties) to allow
such properties.
Fixes: fd2a052ccd69 ("dt-bindings: usb: add common Type-C USB Switch schema")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20250425-fp5-pmic-glink-dp-v3-1-cc9c2aeb42fb@fairphone.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
VIA/WonderMedia SoCs use a plain vanilla EHCI controller with a
compatible string "via,vt8500-ehci". This compatible is already
used by the mainline Linux driver and relevant in-tree DTS files,
so add it to the binding.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Link: https://lore.kernel.org/r/20250425-vt8500-ehci-binding-v2-1-b4a350335add@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The dt-core typically allows multiple compatibles[1] but usb-device
currently forces a single compatible.
This is an issue when multiple devices with slightly different productID
all behave the same. This would require the driver to keep updating its
compatible matching table to include this new productID instead of doing
what is usually done: have two compatibles, the leftmost which matches
exactly the HW device definition, and the rightmost one as a fallback
which is assumed to be 100% compatible with the device at hand. If this
assumption turns out to be wrong, it is easy to work around this without
having to modify the device tree by handling the leftmost compatible in the driver.
[1] https://github.com/devicetree-org/dt-schema/blob/main/dtschema/schemas/dt-core.yaml#L21-L25
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250418-dt-binding-usb-device-compatibles-v2-1-b3029f14e800@cherry.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Document the Renesas USBHS controller found on the Renesas RZ/V2H(P) SoC.
The USBHS block on RZ/V2H(P) is functionally identical to the one on the
RZ/G2L family, so no driver changes are needed. The existing
"renesas,rzg2l-usbhs" fallback compatible will continue to be used for
handling this IP.
In addition, update the schema validation logic by replacing the enum list
of SoC-specific compatibles with a const "renesas,rzg2l-usbhs" as all
listed SoCs share identical USBHS hardware and already include the fallback
compatible. This will help to simplify the schema and avoid redundancy.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250414165201.362262-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath into wireless-next
Jeff Johnson says:
====================
ath.git patches for v6.16
ath12k:
Enable AHB support for IPQ5332.
Add monitor interface support to QCN9274.
Add MLO support to WCN7850.
Add 802.11d scan offload support to WCN7850.
ath11k:
Restore hibernation support
In addition, perform the usual set of bug fixes and cleanups across
all supported drivers.
====================
Change-Id: I6555e64d7434f3a5fed5faab25057be93106b18e
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Convert the Analog Devices ad5820 to DT schema format.
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Add bindings for OVO2E10 a two lane MIPI CSI, two megapixel 1080p RGB
sensor.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
The serializer's I2C address on the FPD-Link bus is usually communicated
to the deserializer once the forward-channel is established. But in some
cases it might be necessary to program the serializer (over the
back-channel) before the forward-channel is established.
This can be used e.g. to correct serializer configuration which
otherwise would prevent the FC to be enabled. To be able to communicate
to the serializer before the forward-channel is up, the deserializer
driver neds to know the default i2c address of the serializer.
Allow setting the serializer i2c address using the 'reg' property. This
is optional, and usually not needed.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Append missing vendor and align with other sony definitions.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Change the maintainer for the Intel MAX10 BMC Secure Update driver from
Peter Colberg to Matthew Gerlach and update the ABI documentation.
Signed-off-by: Peter Colberg <peter.colberg@altera.com>
Acked-by: Matthew Gerlach <matthew.gerlach@altera.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20250317210136.72816-1-peter.colberg@altera.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
|
|
Add MBa91xxCA starterkit base board for TQMa93xxCA/LA SOM for
parallel display evaluation.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add DT compatible strings for Toradex SMARC iMX8MP SoM and
Toradex SMARC Development carrier board.
Link: https://www.toradex.com/computer-on-modules/smarc-arm-family/nxp-imx-8m-plus
Link: https://www.toradex.com/products/carrier-board/smarc-development-board-kit
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Vitor Soares <vitor.soares@toradex.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Adds support for the Nitrogen8M Plus System on Module and the Nitrogen8M
Plus ENC Carrier Board.
Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Remove three functions that are no longer used.
rxrpc_get_txbuf() last use was removed by 2020's
commit 5e6ef4f1017c ("rxrpc: Make the I/O thread take over the call and
local processor work")
rxrpc_kernel_get_epoch() last use was removed by 2020's
commit 44746355ccb1 ("afs: Don't get epoch from a server because it may be
ambiguous")
rxrpc_kernel_set_max_life() last use was removed by 2023's
commit db099c625b13 ("rxrpc: Fix timeout of a call that hasn't yet been
granted a channel")
Both of the rxrpc_kernel_* functions were documented. Remove that
documentation as well as the code.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: David Howells <dhowells@redhat.com>
Link: https://patch.msgid.link/20250422235147.146460-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The asp-v3.0 Ethernet controller uses a brcm unimac like its
predecessor.
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250422233645.1931036-7-justin.chen@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add asp-v3.0 support. v3.0 is a major revision that reduces
the feature set for cost savings. We have a reduced amount of
channels and network filters.
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250422233645.1931036-6-justin.chen@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove asp-v2.0 which was only supported on one SoC that never
saw the light of day.
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250422233645.1931036-3-justin.chen@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove asp-v2.0 which was only supported on one SoC that never
saw the light of day.
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250422233645.1931036-2-justin.chen@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.15-rc4).
This pull includes wireless and a fix to vxlan which isn't
in Linus's tree just yet. The latter creates with a silent conflict
/ build breakage, so merging it now to avoid causing problems.
drivers/net/vxlan/vxlan_vnifilter.c
094adad91310 ("vxlan: Use a single lock to protect the FDB table")
087a9eb9e597 ("vxlan: vnifilter: Fix unlocked deletion of default FDB entry")
https://lore.kernel.org/20250423145131.513029-1-idosch@nvidia.com
No "normal" conflicts, or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
* Single fix for broken usage of 'multi-MIDR' infrastructure in PI
code, adding an open-coded erratum check for Cavium ThunderX
* Bugfixes from a planned posted interrupt rework
* Do not use kvm_rip_read() unconditionally to cater for guests
with inaccessible register state.
|
|
As kernel-doc script is used not only on Documentation, but
also on scripts and drivers/drm Makefiles, move it to the
main makefile, as otherwise sub-makefiles may not have it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <bb3ea3b49e76aee51dae7762db10c4d38cd67afe.1745453655.git.mchehab+huawei@kernel.org>
|
|
Despite its name, what's there is a set of Sphinx arguments that
are passed to sphinx/kerneldoc.py:
- kerneldoc_srctree: location of the source tree;
- kerneldoc_bin: external script to excecute kernel-doc
Drop it, and just place the values at the already-existing
ALLSPHINXOPTS variable.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <88be0fc288598c30fbedb9cc230b2a7ed28225a2.1745453655.git.mchehab+huawei@kernel.org>
|
|
Document compatible for RPMh power domain controller on SM4450 Platform.
Signed-off-by: Ajit Pandey <quic_ajipan@quicinc.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250417-sm4450_rpmhpd-v1-1-361846750d3a@quicinc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The version in the sysfs attribute should correspond to the version in
which this is enabled and visible for end users. It usually doesn't
correspond to the version in which the patch was developed, but rather a
release that will contain it. Update them to 6.16.
Fixes: 28f79ac609de ("drm/xe/hwmon: expose fan speed")
Reported-by: Ulisses Furquim <ulisses.furquim@intel.com>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4841
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link: https://lore.kernel.org/r/20250421-hwmon-doc-fix-v1-2-9f68db702249@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
The version in the sysfs attribute should correspond to the version in
which this is enabled and visible for end users. It usually doesn't
correspond to the version in which the patch was developed, but rather a
release that will contain it. Update them to 6.15.
Fixes: dac328dea701 ("drm/xe/hwmon: expose package and vram temperature")
Reported-by: Ulisses Furquim <ulisses.furquim@intel.com>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4840
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link: https://lore.kernel.org/r/20250421-hwmon-doc-fix-v1-1-9f68db702249@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Even though the kernel's coding-style document does not explicitly
state this, we generally put a newline after the semicolon of every
C language statement to enhance code readability.
Adjust the placement of newlines to adhere to this convention.
Reported-by: Chen Linxuan <chenlinxuan@uniontech.com>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Reviewed-by: Yanteng Si <si.yanteng@linux.dev>
Link: https://lore.kernel.org/r/DB66473733449DB0+20250423030632.17626-1-wangyuli@uniontech.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Rewrite the textual description for the WonderMedia PWM controller
as YAML schema, and switch the filename to follow the compatible
string.
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250418-via_pwm_binding-v2-1-17545f4d719e@gmail.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
Add a compatible string for the Display Controller PWM IP found in
the MediaTek Dimensity 1200 (MT6893) SoC, which is compatible with
the one found in MT8183.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250416120253.147977-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
The ROHM BD96806 is very similar to the BD96802. The differences visible
to the drivers is different tune voltage ranges.
Add compatible for the ROHM BD96805 PMIC.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/3c245cc3829dc64d977c97eae7ae8e2be6233481.1744090658.git.mazziesaccount@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The ROHM BD96805 is very similar to the BD96801. The differences visible
to the drivers is different tune voltage ranges.
Add compatible for the ROHM BD96805 PMIC.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/f49addee698b683a071c12808f06a56509152f5c.1744090658.git.mazziesaccount@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
BD96802Qxx-C is an automotive grade configurable Power Management
Integrated Circuit supporting Functional Safety features for application
processors, SoCs and FPGAs. BD96802 is controlled via I2C, provides two
interrupt lines and has two controllable buck regulators.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/ed55edffca3b0a2d7e8bcd9ebd8d8abd9a9b7dfe.1744090658.git.mazziesaccount@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
BD96802Qxx-C is an automotive grade configurable Power Management
Integrated Circuit supporting Functional Safety features for application
processors, SoCs and FPGAs. BD96802 is controlled via I2C, provides two
interrupt lines and has two controllable buck regulators.
The BD96802 belongs to the family of ROHM Scalable PMICs and is intended
to be used as a companion PMIC for the BD96801.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/df7983e7c623041f14a4fbe409a2cff846e68a05.1744090658.git.mazziesaccount@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|