| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
GS101 supports a couple different reset types via certain registers in
the SYSCON register map.
Add a compatible for it. When in effect, all register values and offsets
are implied, hence they shall not be specified in that case.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250401-syscon-reboot-reset-mode-v5-1-5b9357442363@linaro.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
On the Huawei Matebook E Go tablet the EC provides access to the adapter
and battery status. Add the driver to read power supply status on the
tablet.
This driver is inspired by the following drivers:
drivers/power/supply/lenovo_yoga_c630_battery.c
drivers/platform/arm64/acer-aspire1-ec.c
drivers/acpi/battery.c
drivers/acpi/ac.c
base-commit: 613af589b566093ce7388bf3202fca70d742c166
Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
Link: https://lore.kernel.org/r/20250313103437.108772-1-mitltlatltl@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Add a description for the get_csb_buffer callback, update the glossary,
and add some extra information about RB, which is associated with CSB
configuration.
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This has been announced so add to the table.
Link: https://www.amd.com/en/products/processors/laptop/ryzen/ai-300-series/amd-ryzen-ai-max-plus-395.html
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250422160740.3610-1-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Commit a3e8fe814ad1 ("x86/build: Raise the minimum GCC version to 8.1")
raised the minimum compiler version as enforced by Kbuild to gcc-8.1
and clang-15 for x86.
This is actually the same gcc version that has been discussed as the
minimum for all architectures several times in the past, with little
objection. A previous concern was the kernel for SLE15-SP7 needing to
be built with gcc-7. As this ended up still using linux-6.4 and there
is no plan for an SP8, this is no longer a problem.
Change it for all architectures and adjust the documentation accordingly.
A few version checks can be removed in the process. The binutils
version 2.30 is the lowest version used in combination with gcc-8 on
common distros, so use that as the corresponding minimum.
Link: https://lore.kernel.org/lkml/20240925150059.3955569-32-ardb+git@google.com/
Link: https://lore.kernel.org/lkml/871q7yxrgv.wl-tiwai@suse.de/
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Debugging issues on AMD hardware can be challenging for users without
proper documentation and tools.
Introduce a document that includes techniques for debugging s2idle
issues. It will be expanded for debugging other issues later.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Link: https://lore.kernel.org/20250422234830.2840784-2-superm1@kernel.org
|
|
Update the debugfs documentation to indicate that debugfs_remove()
should be used to clean up debugfs entries.
In commit a3d1e7eb5abe ("simple_recursive_removal(): kernel-side rm -rf
for ramfs-style filesystems"), function debugfs_remove_recursive()
was made into an alias for debugfs_remove():
#define debugfs_remove_recursive debugfs_remove
Therefore, drivers should just use debugfs_remove() going forward.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Link: https://lore.kernel.org/r/20250429173958.3973958-1-ttabi@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Merge series from David Lechner <dlechner@baylibre.com>:
In order to achieve a 4 MSPS rate on a 16-bit ADC with a 80 MHz SCLK
using the SPI offload feature of the AXI SPI Engine, we need to shave
off some time that is spent executing unnecessary instructions. There
are a few one-time setup instructions that can be moved so that they
execute only once when the SPI offload trigger is enabled rather than
repeating each time the offload is triggered. Additionally, a recent
change to the IP block allows dropping the SYNC instruction completely.
With these changes, we are left with only the 3 instructions that are
needed to to assert CS, transfer the data, and deassert CS. This makes
3 + 16 * 12.5 ns = 237.5 ns < 250 ns which is comfortably within the
available time period.
|
|
OneXPlayer devices have a charge inhibit feature that allows the user
to select between it being active always or only when the device is on.
Therefore, add attribute inhibit-charge-awake to charge_behaviour to
allow the user to select that charge should be paused only when the
device is awake.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Derek J. Clark <derekjohn.clark@gmail.com>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://lore.kernel.org/r/20250425111821.88746-14-lkml@antheas.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Adds documentation about the tt_led attribute of OneXPlayer devices to
the sysfs-class-oxp ABI documentation.
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Derek J. Clark <derekjohn.clark@gmail.com>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://lore.kernel.org/r/20250425111821.88746-6-lkml@antheas.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add missing documentation about the tt_toggle attribute that was added
in kernel 6.5.
Fixes: be144ee491272 ("hwmon: (oxp-sensors) Add tt_toggle attribute on supported boards")
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Derek J. Clark <derekjohn.clark@gmail.com>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://lore.kernel.org/r/20250425111821.88746-5-lkml@antheas.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The EC of OneXPlayer devices used to only control the fan. This is no
longer the case, with the EC of OneXPlayer gaining additional
functionality (turbo button, turbo led, battery controls).
As it will be beneficial from a complexity perspective to retain this
driver as a single unit, move it out of hwmon, and into platform/x86.
Also, remove the hwmon documentation to prepare moving it to
Documentation/ABI/.
While at it, add myself to the maintainer's file.
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Derek J. Clark <derekjohn.clark@gmail.com>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://lore.kernel.org/r/20250425111821.88746-4-lkml@antheas.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Allow the special case of a redirect from a lower layer to a data layer
without having to turn on metacopy. This makes the feature work with
userxattr, which in turn allows data layers to be usable in user
namespaces.
Minimize the risk by only enabling redirect from a single lower layer to a
data layer iff a data layer is specified. The only way to access a data
layer is to enable this, so there's really no reason not to enable this.
This can be used safely if the lower layer is read-only and the
user.overlay.redirect xattr cannot be modified.
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Add cpucl1 and cpucl2 clock definitions.
CPUCL1/2 refer to CPU Cluster 1 and CPU Cluster 2,
which provide clock support for the CPUs on Exynosauto V920 SoC.
Signed-off-by: Shin Son <shin.son@samsung.com>
Link: https://lore.kernel.org/r/20250428113517.426987-2-shin.son@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
The MCU device on SG2044 exposes the same interface as SG2042, which is
already supported by the kernel.
Add compatible string for monitor device of SG2044.
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250413223507.46480-7-inochiama@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following batch contains Netfilter updates for net-next:
1) Replace msecs_to_jiffies() by secs_to_jiffies(), from Easwar Hariharan.
2) Allow to compile xt_cgroup with cgroupsv2 support only,
from Michal Koutny.
3) Prepare for sock_cgroup_classid() removal by wrapping it around
ifdef, also from Michal Koutny.
4) Remove redundant pointer fetch on conntrack template, from Xuanqiang Luo.
5) Re-format one block in the tproxy documentation for consistency,
from Chen Linxuan.
6) Expose set element count and type via netlink attributes,
from Florian Westphal.
* tag 'nf-next-25-04-29' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: nf_tables: export set count and backend name to userspace
docs: tproxy: fix formatting for nft code block
netfilter: conntrack: Remove redundant NFCT_ALIGN call
net: cgroup: Guard users of sock_cgroup_classid()
netfilter: xt_cgroup: Make it independent from net_cls
netfilter: xt_IDLETIMER: convert timeouts to secs_to_jiffies()
====================
Link: https://patch.msgid.link/20250428221254.3853-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Provide support for the following devlink cmds:
-DEVLINK_CMD_REGION_GET
-DEVLINK_CMD_REGION_NEW
-DEVLINK_CMD_REGION_DEL
-DEVLINK_CMD_REGION_READ
ixgbe devlink region implementation, similarly to the ice one,
lets user to create snapshots of content of Non Volatile Memory,
content of Shadow RAM, and capabilities of the device.
For both NVM and SRAM regions provide .read() handler to let user
read their contents without the need to create full snapshots.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Co-developed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Bharath R <bharath.r@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add binding for Pegatron Chagall tablets battery monitor.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250429061803.9581-3-clamor95@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
PEGATRON Corporation is a Taiwanese electronics manufacturing company that
mainly develops computing, communications and consumer electronics for
branded vendors. Link https://www.pegatroncorp.com/
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250429061803.9581-2-clamor95@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Convert vf610-clock.txt to yaml format.
Additional changes:
- swap audio_ext and enet_ext to match existed dts order
- remove clock consumer in example
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250411212339.3273202-1-Frank.Li@nxp.com
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
As most other CoreSight devices the replicator can use either of the
optional clocks. Document those optional clocks in the schema.
Additionally document the one-off case of Zynq-7000 platforms which uses
apb_pclk and two additional debug clocks.
Fixes: 3c15fddf3121 ("dt-bindings: arm: Convert CoreSight bindings to DT schema")
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250425-fix-nexus-4-v3-6-da4e39e86d41@oss.qualcomm.com
|
|
The generic FourCC format always prints the data using the big endian
order. It is generic because it allows to read the data using a custom
ordering.
The current code uses "n" for reading data in the reverse host ordering.
It makes the 4 variants [hnbl] consistent with the generic printing
of IPv4 addresses.
Unfortunately, it creates confusion on big endian systems. For example,
it shows the data &(u32)0x67503030 as
%p4cn 00Pg (0x30305067)
But people expect that the ordering stays the same. The network ordering
is a big-endian ordering.
The problem is that the semantic is not the same. The modifiers affect
the output ordering of IPv4 addresses while they affect the reading order
in case of FourCC code.
Avoid the confusion by replacing the "n" modifier with "hR", aka
reverse host ordering. It is inspired by the existing %p[mM]R printf
format.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/r/CAMuHMdV9tX=TG7E_CrSF=2PY206tXf+_yYRuacG48EWEtJLo-Q@mail.gmail.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Aditya Garg <gargaditya08@live.com>
Link: https://lore.kernel.org/r/20250428123132.578771-1-pmladek@suse.com
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
|
|
The KVM PV ABI recently added a feature that allows the VM to discover
the set of physical CPU implementations, identified by a tuple of
{MIDR_EL1, REVIDR_EL1, AIDR_EL1}. Unlike other KVM PV features, the
expectation is that the VMM implements the hypercall instead of KVM as
it has the authoritative view of where the VM gets scheduled.
To do this the VMM needs to know the values of these registers on any
CPU in the system. While MIDR_EL1 and REVIDR_EL1 are already exposed,
AIDR_EL1 is not. Provide it in sysfs along with the other identification
registers.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20250403231626.3181116-1-oliver.upton@linux.dev
Signed-off-by: Will Deacon <will@kernel.org>
|
|
* kvm-arm64/nv-pmu-fixes:
: .
: Fixes for NV PMU emulation. From the cover letter:
:
: "Joey reports that some of his PMU tests do not behave quite as
: expected:
:
: - MDCR_EL2.HPMN is set to 0 out of reset
:
: - PMCR_EL0.P should reset all the counters when written from EL2
:
: Oliver points out that setting PMCR_EL0.N from userspace by writing to
: the register is silly with NV, and that we need a new PMU attribute
: instead.
:
: On top of that, I figured out that we had a number of little gotchas:
:
: - It is possible for a guest to write an HPMN value that is out of
: bound, and it seems valuable to limit it
:
: - PMCR_EL0.N should be the maximum number of counters when read from
: EL2, and MDCR_EL2.HPMN when read from EL0/EL1
:
: - Prevent userspace from updating PMCR_EL0.N when EL2 is available"
: .
KVM: arm64: Let kvm_vcpu_read_pmcr() return an EL-dependent value for PMCR_EL0.N
KVM: arm64: Handle out-of-bound write to MDCR_EL2.HPMN
KVM: arm64: Don't let userspace write to PMCR_EL0.N when the vcpu has EL2
KVM: arm64: Allow userspace to limit the number of PMU counters for EL2 VMs
KVM: arm64: Contextualise the handling of PMCR_EL0.P writes
KVM: arm64: Fix MDCR_EL2.HPMN reset value
KVM: arm64: Repaint pmcr_n into nr_pmu_counters
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Add new compatible for the QPIC NAND controller v2.1.1 used for SDX75 SoC.
SDX75 NAND controller has iommu support so define it in the properties
section.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Kaushal Kumar <quic_kaushalk@quicinc.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Pull in fixes from 6.15 and resolve a few conflicts so we can have a
clean base for UFS patches.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The ICSSG firmware maintains set of stats called PA_STATS.
Currently the driver only dumps 4 stats. Add support for dumping more
stats.
The offset for different stats are defined as MACROs in icssg_switch_map.h
file. All the offsets are for Slice0. Slice1 offsets are slice0 + 4.
The offset calculation is taken care while reading the stats in
emac_update_hardware_stats().
The statistics are documented in
Documentation/networking/device_drivers/icssg_prueth.rst
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://patch.msgid.link/20250424095316.2643573-1-danishanwar@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix the document title and reword the phrasing to active voice.
Signed-off-by: Joel Savitz <jsavitz@redhat.com>
Message-ID: <20250421161723.1138903-1-jsavitz@redhat.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Instead of blocking creation of *.pyc cache, store python
cache under Documentation/output/__pycache__
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <1b9e7f34c1d99a27a8abb308da3221b4663b5693.1745539360.git.mchehab+huawei@kernel.org>
|
|
Instead of re-creating the objects every time, initialize it
just once.
This allows caching previously parsed objects.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <b00788f26e161512858a6e01a673c34743c954df.1745564565.git.mchehab+huawei@kernel.org>
|
|
Fix a spelling typo in fsgs.rst.
Signed-off-by: Adrian Bütler <buetlera123@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20250426122303.15905-1-buetlera123@gmail.com>
|
|
The Toradex Embedded Controller provides system power-off and restart
functionalities.
The two variants, SMARC iMX95 and SMARC iMX8P, have a compatible
I2C interface.
Besides this, different compatible values are defined to allow for
future implementation differences.
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250414171455.155155-2-francesco@dolcini.it
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
'Mitigating speculation side-channels' should be a chapter rather
than title.
Signed-off-by: Cui Wei <chris.wei.cui@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20250426135609.735-1-chris.wei.cui@gmail.com>
|
|
The phy-upstream enum is already defined in the ethtool.h UAPI header
and used by the ethtool userspace tool. However, the ethtool spec does
not reference it, causing YNL to auto-generate a duplicate and redundant
enum.
Fix this by updating the spec to reference the existing UAPI enum
in ethtool.h.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20250425171419.947352-1-kory.maincent@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The nft command snippet for redirecting traffic isn't formatted
in a literal code block like the rest of snippets.
Fix the formatting inconsistency.
Signed-off-by: Chen Linxuan <chenlinxuan@uniontech.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Linux is intended to be compatible with userspace written to Arm's
AAPCS64 procedure call standard [1,2]. For the Scalable Matrix Extension
(SME), AAPCS64 was extended with a "ZA lazy saving scheme", where SME's
ZA tile is lazily callee-saved and caller-restored. In this scheme,
TPIDR2_EL0 indicates whether the ZA tile is live or has been saved by
pointing to a "TPIDR2 block" in memory, which has a "za_save_buffer"
pointer. This scheme has been implemented in GCC and LLVM, with
necessary runtime support implemented in glibc.
AAPCS64 does not specify how the ZA lazy saving scheme is expected to
interact with signal handling, and the behaviour that AAPCS64 currently
recommends for (sig)setjmp() and (sig)longjmp() does not always compose
safely with signal handling, as explained below.
When Linux delivers a signal, it creates signal frames which contain the
original values of PSTATE.ZA, the ZA tile, and TPIDR_EL2. Between saving
the original state and entering the signal handler, Linux clears
PSTATE.ZA, but leaves TPIDR2_EL0 unchanged. Consequently a signal
handler can be entered with PSTATE.ZA=0 (meaning accesses to ZA will
trap), while TPIDR_EL0 is non-null (which may indicate that ZA needs to
be lazily saved, depending on the contents of the TPIDR2 block). While
in this state, libc and/or compiler runtime code, such as longjmp(), may
attempt to save ZA. As PSTATE.ZA=0, these accesses will trap, causing
the kernel to inject a SIGILL. Note that by virtue of lazy saving
occurring in libc and/or C runtime code, this can be triggered by
application/library code which is unaware of SME.
To avoid the problem above, the kernel must ensure that signal handlers
are entered with PSTATE.ZA and TPIDR2_EL0 configured in a manner which
complies with the ZA lazy saving scheme. Practically speaking, the only
choice is to enter signal handlers with PSTATE.ZA=0 and TPIDR2_EL0=NULL.
This change should not impact SME code which does not follow the ZA lazy
saving scheme (and hence does not use TPIDR2_EL0).
An alternative approach that was considered is to have the signal
handler inherit the original values of both PSTATE.ZA and TPIDR2_EL0,
relying on lazy save/restore sequences being idempotent and capable of
racing safely. This is not safe as signal handlers must be assumed to
have a "private ZA" interface, and therefore cannot be entered with
PSTATE.ZA=1 and TPIDR2_EL0=NULL, but it is legitimate for signals to be
taken from this state.
With the kernel fixed to clear TPIDR2_EL0, there are a couple of
remaining issues (largely masked by the first issue) that must be fixed
in userspace:
(1) When a (sig)setjmp() + (sig)longjmp() pair cross a signal boundary,
ZA state may be discarded when it needs to be preserved.
Currently, the ZA lazy saving scheme recommends that setjmp() does
not save ZA, and recommends that longjmp() is responsible for saving
ZA. A call to longjmp() in a signal handler will not have visibility
of ZA state that existed prior to entry to the signal, and when a
longjmp() is used to bypass a usual signal return, unsaved ZA state
will be discarded erroneously.
To fix this, it is necessary for setjmp() to eagerly save ZA state,
and for longjmp() to configure PSTATE.ZA=0 and TPIDR2_EL0=NULL. This
works regardless of whether a signal boundary is crossed.
(2) When a C++ exception is thrown and crosses a signal boundary before
it is caught, ZA state may be discarded when it needs to be
preserved.
AAPCS64 requires that exception handlers are entered with
PSTATE.{SM,ZA}={0,0} and TPIDR2_EL0=NULL, with exception unwind code
expected to perform any necessary save of ZA state.
Where it is necessary to perform an exception unwind across an
exception boundary, the unwind code must recover any necessary ZA
state (along with TPIDR2) from signal frames.
Fix the kernel as described above, with setup_return() clearing
TPIDR2_EL0 when delivering a signal. Folk on CC are working on fixes for
the remaining userspace issues, including updates/fixes to the AAPCS64
specification and glibc.
[1] https://github.com/ARM-software/abi-aa/releases/download/2025Q1/aapcs64.pdf
[2] https://github.com/ARM-software/abi-aa/blob/c51addc3dc03e73a016a1e4edf25440bcac76431/aapcs64/aapcs64.rst
Fixes: 39782210eb7e ("arm64/sme: Implement ZA signal handling")
Fixes: 39e54499280f ("arm64/signal: Include TPIDR2 in the signal context")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Daniel Kiss <daniel.kiss@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Richard Sandiford <richard.sandiford@arm.com>
Cc: Sander De Smalen <sander.desmalen@arm.com>
Cc: Tamas Petz <tamas.petz@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yury Khrustalev <yury.khrustalev@arm.com>
Link: https://lore.kernel.org/r/20250417190113.3778111-1-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Update Mattijs Korpershoek's email address to @kernel.org.
Signed-off-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250428-keypad-email-v1-1-dde6ac76725b@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Cross-merge bpf and other fixes after downstream PRs.
No conflicts.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
DTS example in the bindings should be indented with 2- or 4-spaces and
aligned with opening '- |', so correct any differences like 3-spaces or
mixtures 2- and 4-spaces in one binding. While re-indenting, drop
unused labels.
No functional changes here, but saves some comments during reviews of
new patches built on existing code.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20250324125302.82167-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Add devicetree binding for the rk3588 evb2 board.
Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
Acked-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20250418014757.336-2-kernel@airkyi.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Convert binding doc vf610-nfc to yaml format.
Additional changes:
- ref to nand-controller.yaml.
- include arm-gic.h and vf610-clock.h in examples.
- add clocks and clock-names description.
- remove #address-cells, #size-cells assigned-clocks and
assigned-clock-rates.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The Rockchip RK3576 has two SATA controllers. They work the same as the
RK3568 SATA controllers, having the same number of clocks and ports.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/r/20250424-rk3576-sata-v1-1-23ee89c939fe@collabora.com
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
We need the USB fixes in here as well, and this resolves the following
merge conflicts that were reported in linux-next:
drivers/usb/chipidea/ci_hdrc_imx.c
drivers/usb/host/xhci.h
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the tty/serial fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add devicetree binding document for Loongson-1 NAND controller.
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The Chameleon is an Open Source hardware board designed by YuzkuiHD,
using the Allwinner H618 SoC: https://github.com/YuzukiHD/YuzukiChameleon
Add its compatible name to the list of valid board name.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250307005712.16828-15-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
The BQ24193 is most similar to the BQ24192. This is used in many Nvidia
Tegra devices such as the SHIELD Portable.
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250421-bq24193-v1-1-f125ef396d24@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Add SAMA7D65 RSTC compatible to DT bindings documentation. The
sama7d65-rstc is compatible with the sama7g5-rstc.
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/b2bf907cebc2e251f6d8bebade864372e3dbc1eb.1744666011.git.Ryan.Wanner@microchip.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
DTS example in the bindings should be indented with 2- or 4-spaces and
aligned with opening '- |'. Correct mixtures of the style or any other
indentations to use preferred 4-spaces.
No functional changes here, but saves some comments during reviews
of new patches built on the existing code.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250318081428.33979-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Add cpucl0 clock definitions.
CPUCL0 refers to CPU Cluster 0, which provide clock support
for the CPUs on Exynosauto V920 SoC.
Signed-off-by: Shin Son <shin.son@samsung.com>
Link: https://lore.kernel.org/r/20250423044153.1288077-2-shin.son@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
