Age | Commit message (Collapse) | Author | Files | Lines |
|
The applying patches document
(Documentation/process/applying-patches.rst) mentions incremental stable
patches, but there is no example of how to apply them. Describe the
process.
While at it, remove note about incremental patches and move the external
link of 5.x.y incremental patches to "Where can I download patches?"
section.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20220307063340.256671-1-bagasdotme@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Translate .../peci/peci.rst into Chinese.
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Alex Shi <alexs@kernel.org>
Link: https://lore.kernel.org/r/00577790cb16375e0016513e03d06b671006a3da.1646108017.git.siyanteng@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Translate .../pici/index.rst into Chinese
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Link: https://lore.kernel.org/r/9fdba94417277ae20db7e3b13418584c652be93f.1646108017.git.siyanteng@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Translate .../riscv/vm-layout.rst into Chinese.
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Alex Shi <alexs@kernel.org>
Link: https://lore.kernel.org/r/b59965f7f88ea22ec824dc2e92561b018fd370d1.1646108017.git.siyanteng@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
As a follow-up to the UMN incident[1], the TAB took the responsibility
to document Researcher Guidelines so there would be a common place to
point for describing our expectations as a developer community.
Document best practices researchers should follow to participate
successfully with the Linux developer community.
[1] https://lore.kernel.org/lkml/202105051005.49BFABCE@keescook/
Co-developed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Co-developed-by: Jonathan Corbet <corbet@lwn.net>
Co-developed-by: Stefano Zacchiroli <zack@upsilon.cc>
Signed-off-by: Stefano Zacchiroli <zack@upsilon.cc>
Co-developed-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Steve Rostedt <rostedt@goodmis.org>
Acked-by: Laura Abbott <labbott@kernel.org>
Reviewed-by: Julia Lawall <julia.lawall@inria.fr>
Reviewed-by: Wenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220304181418.1692016-1-keescook@chromium.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Fix following 'make htmldocs' warnings:
./Documentation/admin-guide/perf/hisi-pcie-pmu.rst: WARNING:
document isn't included in any toctree
Fixes: c8602008e247 ("docs: perf: Add description for HiSilicon PCIe PMU driver")
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/20220228031700.1669086-1-wanjiabing@vivo.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
With PREEMPT_RT the _bh() version of a spinlock leaves preemption
enabled, align the doc to say that instead of the opposite.
Reported-by: Leah Leshchinsky <lleshchi@redhat.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20220224212312.2601153-1-ahalaney@redhat.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Make Documentation/admin-guide/reporting-issues.rst point to the newly
created document about regressions
(Documentation/admin-guide/regressions-regressions.rst). This allows to
shorten a few explanations the new document describes better and in more
detail.
While at it move the copyright hint to the end of the file and remove
quotes around links to other places in the documentation. Both issues
came up during the review of the new documents about regressions.
Signed-off-by: Thorsten Leemhuis <linux@leemhuis.info>
Link: https://lore.kernel.org/r/f20114eaddc356a8c79dd62812a6c7f4ca5d87b9.1644994117.git.linux@leemhuis.info
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Add a section with a few rules of thumb about how
quickly developers should address regressions to
Documentation/process/handling-regressions.rst; additionally,
add a short paragraph about this to the companion document
Documentation/admin-guide/reporting-regressions.rst as well.
The rules of thumb were written after studying the quotes from Linus
found in handling-regressions.rst and especially influenced by
statements like "Users are literally the _only_ thing that matters" and
"without users, your program is not a program, it's a pointless piece of
code that you might as well throw away". The author interpreted those in
perspective to how the various Linux kernel series are maintained
currently and what those practices might mean for users running into a
regression on a small or big kernel update.
That for example lead to the paragraph starting with "Aim to get fixes
for regressions mainlined within one week after identifying the culprit,
if the regression was introduced in a stable/longterm release or the
devel cycle for the latest mainline release". Some might see this as
pretty high bar, but on the other hand something like that is needed to
not leave users out in the cold for too long -- which can quickly happen
when updating to the latest stable series, as the previous one is
normally stamped "End of Life" about three or four weeks after a new
mainline release. This makes a lot of users switch during this
timeframe. Any of them thus risk running into regressions not promptly
fixed; even worse, once the previous stable series is EOLed for real,
users that face a regression might be left with only three options:
(1) continue running an outdated and thus potentially insecure kernel
version from an abandoned stable series
(2) run the kernel with the regression
(3) downgrade to an earlier longterm series still supported
This is better avoided, as (1) puts users and their data in danger, (2)
will only be possible if it's a minor regression that doesn't interfere
with booting or serious usage, and (3) might be regression itself or
impossible on the particular machine, as the users might require drivers
or features only introduced after the latest longterm series branched
of.
In the end this lead to the aforementioned "Aim to fix regression within
one week" part. It's also the reason for the "Try to resolve any
regressions introduced in the current development cycle before its
end.".
Signed-off-by: Thorsten Leemhuis <linux@leemhuis.info>
CC: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/a7b717b52c0d54cdec9b6daf56ed6669feddee2c.1644994117.git.linux@leemhuis.info
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Create two documents explaining various aspects around regression
handling and tracking; one is aimed at users, the other targets
developers.
The texts among others describes the first rule of Linux kernel
development and what it means in practice. They also explain what a
regression actually is and how to report one properly.
Both texts additionally provide a brief introduction to the bot the
kernel's regression tracker uses to facilitate the work, but mention the
use is optional.
To sum things up, provide a few quotes from Linus in the document for
developers to show how serious we take regressions.
Signed-off-by: Thorsten Leemhuis <linux@leemhuis.info>
Link: https://lore.kernel.org/r/34e56d3588f22d7e0b4d635ef9c9c3b33ca4ac04.1644994117.git.linux@leemhuis.info
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Commit f7df2b1cf03a ("tools/vm/page_owner_sort.c: count and sort by mem")
added a literal text block without the necessary markup, leading to these
warnings in the docs build:
Documentation/vm/page_owner.rst:92: WARNING: Unexpected indentation.
Documentation/vm/page_owner.rst:96: WARNING: Unexpected indentation.
Documentation/vm/page_owner.rst:107: WARNING: Unexpected indentation.
Add the necessary colons and make the build quieter.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Use past tense as the fonts can be installed after the fact.
Add suggestion to install "Noto Sans CJK" and "Noto Serif CJK"
font families. ("Noto Serif CJK" is optional.)
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/dfefa601-c58d-c86c-953f-5e4454db9409@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Expand comments in LaTeX code and mention some of important points
told in changelogs of conf.py changes.
Hopefully they can help future contributors in this area.
No code change involved.
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/bce9261b-1950-3146-07b2-07bd2ec79158@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Quote from Jon's remark [1]:
I do notice that Documentation/conf.py is getting large and
unapproachable. At some future point, it might be nice to pull
all of the latex stuff out into a separate file where it won't
scare people who stumble into it by accident.
Pull LaTeX preamble settings added since commit 3b4c963243b1 ("docs:
conf.py: adjust the LaTeX document output") out into
sphinx/kerneldoc-preamble.sty.
It will be copied to the build directory by the added
"latex_additional_files" setting in conf.py.
As a bonus, LaTeX/TeX code can be maintained without escaping backslashes.
To compensate the loss of change history in sphinx/kerneldoc-preamble.sty,
here is a list of changes made in conf.py:
- f7ebe6b76940 ("docs: Activate exCJK only in CJK chapters")
- 0afd4df0d16a ("docs: pdfdocs: Prevent column squeezing by tabulary")
- 659653c9e546 ("docs: pdfdocs: Refactor config for CJK document")
- e291ff6f5a03 ("docs: pdfdocs: Add CJK-language-specific font settings")
- 7eb368cc319b ("docs: pdfdocs: Choose Serif font as CJK mainfont if possible")
- 35382965bdd2 ("docs: pdfdocs: Preserve inter-phrase space in Korean translations")
- 77abc2c230b1 ("docs: pdfdocs: One-half spacing for CJK translations")
- 788d28a25799 ("docs: pdfdocs: Permit AutoFakeSlant for CJK fonts")
- 29ac9822358f ("docs: pdfdocs: Teach xeCJK about character classes of quotation marks")
- 7c5c18bdb656 ("docs: pdfdocs: Fix typo in CJK-language specific font settings")
- aa872e0647dc ("docs: pdfdocs: Adjust \headheight for fancyhdr")
- 8716ef413aa5 ("docs: pdfdocs: Tweak width params of TOC")
- 66939df53948 ("docs: pdfdocs: Switch default CJK font to KR variants")
- 7b686a2ea1e4 ("docs: pdfdocs: Enable CJKspace in TOC for Korean titles")
- 5d9158e3c762 ("docs/translations: Skip CJK contents if suitable fonts not found")
- b774cc46313b ("docs: pdfdocs: Move CJK monospace font setting to main conf.py")
[1]: https://lore.kernel.org/all/87zgmr66cn.fsf@meer.lwn.net/
Suggested-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Link: https://lore.kernel.org/r/aaa9dca1-27c0-c414-77f3-c5587db0cc5b@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
__make_request() and end_that_request_last() do no longer exist. Replace
them with the current call-site.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviwed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220222012751.1933194-1-naohiro.aota@wdc.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
There are some words that need to be fixed.
Thanks for Shuah Khan's constructive suggestions.
The text has been fixed as follows.
a. So, if you'd like to use it, you need
to add "page_owner=on" into your boot cmdline.
Here, "into" has been replaced with "to".
b. ...page owner is disabled in runtime due to no
enabling, boot option, runtime overhead is marginal.
Here, "no" has been replaced with "not".
Signed-off-by: Yixuan Cao <caoyixuan2019@email.szu.edu.cn>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20220223134104.2663-1-caoyixuan2019@email.szu.edu.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
There are 2 duplicated words found in osnoise tracer documentation.
This patch removes them.
Signed-off-by: Oscar Shiang <oscar0225@livemail.tw>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Link: https://lore.kernel.org/r/TYCP286MB1913117487F390E3BCE38B15A1399@TYCP286MB1913.JPNP286.PROD.OUTLOOK.COM
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
As LaTeX macros for CJK font settings can have Latin-script font
settings as well, settings under Documentation/translations/ can
be moved to the main conf.py.
By this change, translations.pdf built by top-level "make pdfdocs"
can have properly aligned ascii-art diagrams except for Korean
ones.
For the reason of remaining misalignment in Korean diagrams, see
changelog of commit a90dad8f610a ("docs: pdfdocs: Add conf.py
local to translations for ascii-art alignment").
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/eb87790a-03f4-9f29-c8a3-ef2c3e78ca18@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
On systems without "Noto Sans CJK" fonts, CJK chapters in
translations.pdf are full of "TOFU" boxes, with a long build time and
a large log file containing lots of missing-font warnings.
Avoid such waste of time and resources by skipping CJK chapters when
CJK fonts are not available.
To skip whole chapters, change the definition of
\kerneldocBegin{SC|TC|KR|JP} commands so that they can have an argument
to be ignored.
This works as far as the argument (#1) is not used in the command.
In place of skipped contents, put a note on skipped contents at the
beginning of the PDF.
Change the call sites in index.rst of CJK translations accordingly.
When CJK fonts are available, existing command definitions with
no argument just work. LaTeX engine will see additional pairs of
"{" and "}", which add a level of grouping without having any effect
on typesetting.
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/3359ca41-b81d-b2c7-e437-7618efbe241d@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Korean (Hangul) titles in Table of Contents of translations.pdf
don't have inter-phrase spaces.
This is because the CJKspace option of xeCJK is disabled by
default.
Restore the spaces by enabling the option at the beginning of every
document and disable it in the \kerneldocBegin{SC|TC|JP} commands.
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/19141b3e-01d9-1f6d-5020-42fbda784831@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
xeCJK is enabled in Table of Contents (TOC) so that translations.pdf
built by top-level "make pdfdocs" can have its TOC typeset properly.
This causes quotation marks and apostrophe symbols appear too wide in
Latin-script docs.
This is because (1) Sphinx converts ASCII symbols into multi-byte
UTF-8 ones in LaTeX and (2) in the SC variant of "Noto CJK" font
families, those UTF-8 symbols have full-width glyph.
The KR variant of the font families has half-width glyph for those
symbols and TOC pages should look nicer when it is used instead.
Switch the default CJK font families to the KR variant and teach
xeCJK of those symbols' widths.
To compensate the switch, teach xeCJK of the width in the SC and
TC variants.
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/0c8ea878-0a6f-ea01-ab45-4e66c5facee9@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Sphinx has its own set of width parameters of Table of Contents (TOC)
for LaTeX defined in its class definition of sphinxmanual.cls.
It also inherits parameters for chapter entries from report.cls of
original LaTeX base.
However, they are optimized assuming small documents with tens of
pages and chapters/sections of less than 10.
To cope with some of kernel-doc documents with more than 1000
pages and several tens of chapters/sections, definitions of those
parameters need to be adjusted.
Unfortunately, those parameters are hard coded in the class
definitions and need low-level LaTeX coding tricks to redefine.
As Sphinx 1.7.9 does not have \sphinxtableofcontentshook,
which defines those parameters in later Sphinx versions,
for compatibility with both pre-1.8 and later Sphinx versions,
empty the hook altogether and redefine \@pnumwidth, \l@chapter,
\l@section, and \@subsection commands originally defined in
report.cls.
Summary of parameter changes:
Width of page number (\@pnumwidth): 1.55em -> 2.7em
Width of chapter number: 1.5em -> 1.8em
Indent of section number: 1.5em -> 1.8em
Width of section number: 2.6em -> 3.2em
Indent of subsection number: 4.1em -> 5em
Width of subsection number: 3.5em -> 4.3em
Notes:
1. Parameters for subsection become relevant only when
":maxdepth: 3" is specified under "toctree::" (e.g., RCU/index.rst).
They can hold subsection numbers up to 5 digits such as "18.7.13"
(in RCU.pdf).
2. Number of chapters in driver-api.pdf is getting closer to 100.
When it reaches 100, another set of tweaks will be necessary.
3. The low-level LaTeX trick is mentioned in "Unofficial LaTeX2e
reference manual" at:
http://latexref.xyz/Table-of-contents-etc_002e.html
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/e52b4718-7909-25be-fbc1-76800aa62ae3@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
This fixes some simple grammar errors in the documentation for zram,
specifically errors in the optional feature section of the zram
documentation.
Signed-off-by: Ethan Dye <mrtops03@gmail.com>
Link: https://lore.kernel.org/r/20220207235442.95090-1-mrtops03@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Translate scheduler/sched-energy.rst into Chinese.
Signed-off-by: Tang Yizhou <tangyizhou@huawei.com>
Reviewed-by: Alex Shi <alexs@kernel.org>
Reviewed-by: Yanteng Si <siyanteng@loongson.cn>
Link: https://lore.kernel.org/r/20220208020105.14117-1-tangyizhou@huawei.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Translate power/energy-model.rst into Chinese.
Signed-off-by: Tang Yizhou <tangyizhou@huawei.com>
Reviewed-by: Alex Shi <alexs@kernel.org>
Link: https://lore.kernel.org/r/20220208133716.24070-1-tangyizhou@huawei.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Signed-off-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20220210192200.30828-1-pali@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Add the spec version to the title line.
Explain likely source of "Unknown lines".
"Unknown lines" in nested tests are optionally indented.
Add "Unknown lines" items to differences between TAP & KTAP list
Convert "Major differences between TAP and KTAP" from a bullet list
to a table. The bullet list was being formatted as a single
paragraph.
Reviewed-by: Tim Bird <Tim.Bird@sony.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Link: https://lore.kernel.org/r/20220210233630.3304495-1-frowand.list@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
It turns out that LaTeX enables \write18, which allows (some) shell
commands to be executed from the document source, by default. This the
often-seen warning during a pdfdocs build:
restricted \write18 enabled
That is a potential security problem and is entirely unnecessary; nothing
in the kernel PDF docs build needs that capability. So disable \write18
explicitly.
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Link: https://lore.kernel.org/r/519bd2d9-1bee-03e1-eeb4-d9883c18be0c@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Depending on its version, distro config, and system-setup type,
inkscape(1) emits various warning messages which are harmless in
command-line uses.
List of such warning messages (incomplete, long ones wrapped):
- Gtk-Message: hh:mm:ss.nnn: Failed to load module "canberra-gtk-module"
- Unable to init server: Could not connect: Connection refused
- Failed to get connection
- ** (inkscape:xxx): CRITICAL **: hh:mm:ss.nnn: dbus_g_proxy_new_for_name:
assertion 'connection != NULL' failed
- ** (inkscape:xxx): CRITICAL **: hh:mm:ss.nnn: dbus_g_proxy_call:
assertion 'DBUS_IS_G_PROXY (proxy)' failed
- ** (inkscape:xxx): CRITICAL **: hh:mm:ss.nnn: dbus_g_connection_register_g_object:
assertion 'connection != NULL' failed
- ** (inkscape:xxx): WARNING **: hh:mm:ss.nnn:
Fonts dir '/usr/share/inkscape/fonts' does not exist and will be ignored.
To avoid unnecessary anxiety, capture the message and output it via
kernellog.verbose or kernellog.warn depending on the exit code.
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/e26a7b53-9155-8394-4a31-6006379b65a5@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Using convert(1) of ImageMagick for SVG -> PDF conversion results in
PDFs containing raster (bitmap) images which sometimes look blurry.
Ideally speaking, SVG to PDF conversion should retain vector graphics
in SVG.
rsvg-convert(1) can do such conversions with regard to SVG files
generated by dot(1).
Unfortunately, rsvg-convert(1) does not cover some of SVG features
specific to Inkscape.
inkscape(1) of Inkscape naturally covers such SVG features.
So add a route in svg2pdf() so that inkscape(1) is used when it is
available.
Note:
After this change, if you have Inkscape installed, ImageMagick nor
librsvg are not required.
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/r/3eea2a8d-c52d-ee07-cf7b-83784c6f6e4b@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
To prevent any regression on existing build systems, limit the
fallback of converting DOT -> raster PDF only when both of the
following conditions are met.
o dot(1) doesn't support -Tpdf
o rsvg-convert(1) is not found
While we are here, add kernellog.verbose messages related to
rsvg-convert, 'dot -Tpdf', and 'dot -Tsvg' commands.
Suggested-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/e76f61e1-7366-ba00-b119-8ea6a2499861@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
On openSUSE, dot(1) command does not support direct PDF output.
On other distros, generated PDF images have unnecessarily wide margins,
especially for small graphs.
By using dot(1) for DOT -> SVG, then rsvg-convert(1) for SVG -> PDF,
more optimal PDF images can be obtained, with the bonus of improved
portability across various distros.
Add rules in kfigure.py so that the above mentioned route is taken
when rsvg-convert(1) is available.
Note that rsvg-convert(1) is recommended by sphinx_pre_install.
So it is most likely that existing systems for building pdfdocs have
rsvg-convert(1) installed.
Note:
SVG features supported by rsvg-convert(1) vary depending on its
version and distro config.
For example, the one found on Ubuntu Bionic (version 2.40.20) does
poor job in rendering some of SVG files drawn by Inkscape.
SVG files generated by dot(1) are converted nicely even with such
old versions of rsvg-convert.
So this change does not affect the quality of such figures in any
way.
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/r/15b56dd3-081a-2469-c3a4-dfc1ca4c6c2d@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
According to the function prototype of rebalance_domains(), its first
parameter is *rq* and the document need to be updated.
Signed-off-by: Tang Yizhou <tangyizhou@huawei.com>
Link: https://lore.kernel.org/r/20211221031818.23186-1-tangyizhou@huawei.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Translate core-api/rbtree.rst into Chinese.
Signed-off-by: Tang Yizhou <tangyizhou@huawei.com>
Reviewed-by: Alex Shi <alexs@kernel.org>
Link: https://lore.kernel.org/r/20211225015146.1535-1-tangyizhou@huawei.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
It's unclear from "Submitting Patches" documentation that Reported-by
is not supposed to be used against new features. (It's more clear
in the section 5.4 "Patch formatting and changelogs" of the "A guide
to the Kernel Development Process", where it suggests that change
should fix something existing in the kernel. Clarify the Reported-by
usage in the "Submitting Patches".
Reported-by: Florian Eckert <fe@dev.tdt.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20220127163258.48482-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Translate .../vm/highmem.rst into Chenese.
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Alex Shi <alexs@kernel.org>
Link: https://lore.kernel.org/r/51e088d1e8659b9411534a5a3ad03d88c79a5297.1643246827.git.siyanteng@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Translate .../vm/free_page_reporting.rst into Chinese.
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Alex Shi <alexs@kernel.org>
Link: https://lore.kernel.org/r/4ef77c1be8319fc45b18e9f4c41986095d794562.1643246827.git.siyanteng@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Translate .../vm/damon/api.rst into Chinese.
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Alex Shi <alexs@kernel.org>
Link: https://lore.kernel.org/r/3d81dbc79e0f982edd68fb9dfee6f0ccb47f7710.1642230669.git.siyanteng@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Translate .../vm/damon/design.rst into Chinese.
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Alex Shi <alexs@kernel.org>
Link: https://lore.kernel.org/r/2685ed7d446620b260c20158685728c3adb5e0fe.1642230669.git.siyanteng@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Translate .../vm/damon/faq.rst into Chinese.
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Alex Shi <alexs@kernel.org>
Link: https://lore.kernel.org/r/30507f807a835360f57bb9498c37f4c3644b33b7.1642230669.git.siyanteng@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
1) Translate .../vm/damon/index.rst into Chinese.
2) add damon into .../zh_CN/vm/index.rst
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Alex Shi <alexs@kernel.org>
Link: https://lore.kernel.org/r/8e8c7651785f1ce20766bc1b3a4fc44faedb84bb.1642230669.git.siyanteng@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Update zh_CN/accounting/delay-accounting.rst.
The document modification has been merged which refers to the following link:
https://lore.kernel.org/all/1639583021-92977-1-git-send-email-wang.yong12@zte.com.cn/
Signed-off-by: wangyong <wang.yong12@zte.com.cn>
Reviewed-by: Yang Yang <yang.yang29@zte.com.cn>
Reviewed-by: Alex Shi <alexs@kernel.org>
Link: https://lore.kernel.org/r/1642003482-48935-1-git-send-email-wang.yong12@zte.com.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Translate .../vm/balance.rst into Chinese.
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Alex Shi <alexs@kernel.org>
Reviewed-by: Tang Yizhou <tangyizhou@huawei.com>
Link: https://lore.kernel.org/r/f1e5a6bcbee3e34fe65a56ee185d9b44daf01cab.1641866889.git.siyanteng@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Translatr .../vm/active_mm.rst into Chinese.
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Alex Shi <alexs@kernel.org>
Reviewed-by: Tang Yizhou <tangyizhou@huawei.com>
Link: https://lore.kernel.org/r/99ba014bdd9550bad57db6c21653cb7314d7c2d8.1641866889.git.siyanteng@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Translate ../vm/index.rst into Chinese.
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Tang Yizhou <tangyizhou@huawei.com>
Reviewed-by: Alex Shi <alexs@kernel.org>
Link: https://lore.kernel.org/r/60c579b34792c4c76194c4843a695263a982b37d.1641866889.git.siyanteng@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
The topic of nesting and reentrancy in the context of early entry code
hasn't been addressed so far. So do it.
Signed-off-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20220110105044.94423-2-nsaenzju@redhat.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
The entry/exit handling for exceptions, interrupts, syscalls and KVM is
not really documented except for some comments.
Fill the gaps.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de
Co-developed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Signed-off-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
----
Changes since v3:
- s/nointr/noinstr/
Changes since v2:
- No big content changes, just style corrections, so it should be
pretty clean at this stage. In the light of this, I kept Mark's
Reviewed-by.
- Paul's style and paragraph re-writes
- Randy's style comments
- Add links to transition type sections
Documentation/core-api/entry.rst | 261 +++++++++++++++++++++++++++++++
Documentation/core-api/index.rst | 8 +
2 files changed, 269 insertions(+)
create mode 100644 Documentation/core-api/entry.rst
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20220110105044.94423-1-nsaenzju@redhat.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Translate power/opp.rst into Chinese.
Signed-off-by: Tang Yizhou <tangyizhou@huawei.com>
Reviewed-by: Alex Shi <alexs@kernel.org>
Reviewed-by: Yanteng Si <siyanteng@loongson.cn>
Link: https://lore.kernel.org/r/20211229024212.32752-4-tangyizhou@huawei.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Translate power/index.rst into Chinese.
Signed-off-by: Tang Yizhou <tangyizhou@huawei.com>
Reviewed-by: Alex Shi <alexs@kernel.org>
Reviewed-by: Yanteng Si <siyanteng@loongson.cn>
Link: https://lore.kernel.org/r/20211229024212.32752-3-tangyizhou@huawei.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Many */index in the Chinese index.rst are not in the same order as the
English version. Put them to where they should be.
Signed-off-by: Tang Yizhou <tangyizhou@huawei.com>
Reviewed-by: Yanteng Si <siyanteng@loongson.cn>
Link: https://lore.kernel.org/r/20211229024212.32752-2-tangyizhou@huawei.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|