summaryrefslogtreecommitdiff
path: root/Documentation
AgeCommit message (Collapse)AuthorFilesLines
2024-03-24Merge tag 'x86-urgent-2024-03-24' of ↵Linus Torvalds1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: - Ensure that the encryption mask at boot is properly propagated on 5-level page tables, otherwise the PGD entry is incorrectly set to non-encrypted, which causes system crashes during boot. - Undo the deferred 5-level page table setup as it cannot work with memory encryption enabled. - Prevent inconsistent XFD state on CPU hotplug, where the MSR is reset to the default value but the cached variable is not, so subsequent comparisons might yield the wrong result and as a consequence the result prevents updating the MSR. - Register the local APIC address only once in the MPPARSE enumeration to prevent triggering the related WARN_ONs() in the APIC and topology code. - Handle the case where no APIC is found gracefully by registering a fake APIC in the topology code. That makes all related topology functions work correctly and does not affect the actual APIC driver code at all. - Don't evaluate logical IDs during early boot as the local APIC IDs are not yet enumerated and the invoked function returns an error code. Nothing requires the logical IDs before the final CPUID enumeration takes place, which happens after the enumeration. - Cure the fallout of the per CPU rework on UP which misplaced the copying of boot_cpu_data to per CPU data so that the final update to boot_cpu_data got lost which caused inconsistent state and boot crashes. - Use copy_from_kernel_nofault() in the kprobes setup as there is no guarantee that the address can be safely accessed. - Reorder struct members in struct saved_context to work around another kmemleak false positive - Remove the buggy code which tries to update the E820 kexec table for setup_data as that is never passed to the kexec kernel. - Update the resource control documentation to use the proper units. - Fix a Kconfig warning observed with tinyconfig * tag 'x86-urgent-2024-03-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/boot/64: Move 5-level paging global variable assignments back x86/boot/64: Apply encryption mask to 5-level pagetable update x86/cpu: Add model number for another Intel Arrow Lake mobile processor x86/fpu: Keep xfd_state in sync with MSR_IA32_XFD Documentation/x86: Document that resctrl bandwidth control units are MiB x86/mpparse: Register APIC address only once x86/topology: Handle the !APIC case gracefully x86/topology: Don't evaluate logical IDs during early boot x86/cpu: Ensure that CPU info updates are propagated on UP kprobes/x86: Use copy_from_kernel_nofault() to read from unsafe address x86/pm: Work around false positive kmemleak report in msr_build_context() x86/kexec: Do not update E820 kexec table for setup_data x86/config: Fix warning for 'make ARCH=x86_64 tinyconfig'
2024-03-24Merge tag 'sched-urgent-2024-03-24' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler doc clarification from Thomas Gleixner: "A single update for the documentation of the base_slice_ns tunable to clarify that any value which is less than the tick slice has no effect because the scheduler tick is not guaranteed to happen within the set time slice" * tag 'sched-urgent-2024-03-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/doc: Update documentation for base_slice_ns and CONFIG_HZ relation
2024-03-24Documentation/x86: Document that resctrl bandwidth control units are MiBTony Luck1-4/+4
The memory bandwidth software controller uses 2^20 units rather than 10^6. See mbm_bw_count() which computes bandwidth using the "SZ_1M" Linux define for 0x00100000. Update the documentation to use MiB when describing this feature. It's too late to fix the mount option "mba_MBps" as that is now an established user interface. Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20240322182016.196544-1-tony.luck@intel.com
2024-03-24Merge tag 'timers-core-2024-03-23' of ↵Linus Torvalds6-5/+81
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull more clocksource updates from Thomas Gleixner: "A set of updates for clocksource and clockevent drivers: - A fix for the prescaler of the ARM global timer where the prescaler mask define only covered 4 bits while it is actully 8 bits wide. This obviously restricted the possible range of prescaler adjustments - A fix for the RISC-V timer which prevents a timer interrupt being raised while the timer is initialized - A set of device tree updates to support new system on chips in various drivers - Kernel-doc and other cleanups all over the place" * tag 'timers-core-2024-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/timer-riscv: Clear timer interrupt on timer initialization dt-bindings: timer: Add support for cadence TTC PWM clocksource/drivers/arm_global_timer: Simplify prescaler register access clocksource/drivers/arm_global_timer: Guard against division by zero clocksource/drivers/arm_global_timer: Make gt_target_rate unsigned long dt-bindings: timer: add Ralink SoCs system tick counter clocksource: arm_global_timer: fix non-kernel-doc comment clocksource/drivers/arm_global_timer: Remove stray tab clocksource/drivers/arm_global_timer: Fix maximum prescaler value clocksource/drivers/imx-sysctr: Add i.MX95 support clocksource/drivers/imx-sysctr: Drop use global variables dt-bindings: timer: nxp,sysctr-timer: support i.MX95 dt-bindings: timer: renesas: ostm: Document RZ/Five SoC dt-bindings: timer: renesas,tmu: Document input capture interrupt clocksource/drivers/ti-32K: Fix misuse of "/**" comment clocksource/drivers/stm32: Fix all kernel-doc warnings dt-bindings: timer: exynos4210-mct: Add google,gs101-mct compatible clocksource/drivers/imx: Fix -Wunused-but-set-variable warning
2024-03-22Merge tag 'riscv-for-linus-6.9-mw2' of ↵Linus Torvalds6-13/+74
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Palmer Dabbelt: - Support for various vector-accelerated crypto routines - Hibernation is now enabled for portable kernel builds - mmap_rnd_bits_max is larger on systems with larger VAs - Support for fast GUP - Support for membarrier-based instruction cache synchronization - Support for the Andes hart-level interrupt controller and PMU - Some cleanups around unaligned access speed probing and Kconfig settings - Support for ACPI LPI and CPPC - Various cleanus related to barriers - A handful of fixes * tag 'riscv-for-linus-6.9-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (66 commits) riscv: Fix syscall wrapper for >word-size arguments crypto: riscv - add vector crypto accelerated AES-CBC-CTS crypto: riscv - parallelize AES-CBC decryption riscv: Only flush the mm icache when setting an exec pte riscv: Use kcalloc() instead of kzalloc() riscv/barrier: Add missing space after ',' riscv/barrier: Consolidate fence definitions riscv/barrier: Define RISCV_FULL_BARRIER riscv/barrier: Define __{mb,rmb,wmb} RISC-V: defconfig: Enable CONFIG_ACPI_CPPC_CPUFREQ cpufreq: Move CPPC configs to common Kconfig and add RISC-V ACPI: RISC-V: Add CPPC driver ACPI: Enable ACPI_PROCESSOR for RISC-V ACPI: RISC-V: Add LPI driver cpuidle: RISC-V: Move few functions to arch/riscv riscv: Introduce set_compat_task() in asm/compat.h riscv: Introduce is_compat_thread() into compat.h riscv: add compile-time test into is_compat_task() riscv: Replace direct thread flag check with is_compat_task() riscv: Improve arch_get_mmap_end() macro ...
2024-03-22Merge tag 'spi-fix-v6.9-merge-window' of ↵Linus Torvalds2-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A small collection of fixes that came in since the merge window. Most of it is relatively minor driver specific fixes, there's also fixes for error handling with SPI flash devices and a fix restoring delay control functionality for non-GPIO chip selects managed by the core" * tag 'spi-fix-v6.9-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: spi-mt65xx: Fix NULL pointer access in interrupt handler spi: docs: spidev: fix echo command format spi: spi-imx: fix off-by-one in mx51 CPU mode burst length spi: lm70llp: fix links in doc and comments spi: Fix error code checking in spi_mem_exec_op() spi: Restore delays for non-GPIO chip select spi: lpspi: Avoid potential use-after-free in probe()
2024-03-22Merge tag 'sound-fix2-6.9-rc1' of ↵Linus Torvalds1-5/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull more sound fixes from Takashi Iwai: "The remaining fixes for 6.9-rc1 that have been gathered in this week. More about ASoC at this time (one long-standing fix for compress offload, SOF, AMD ACP, Rockchip, Cirrus and tlv320 stuff) while another regression fix in ALSA core and a couple of HD-audio quirks as usual are included" * tag 'sound-fix2-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: control: Fix unannotated kfree() cleanup ALSA: hda/realtek: Add quirks for some Clevo laptops ALSA: hda/realtek: Add quirk for HP Spectre x360 14 eu0000 ALSA: hda/realtek: fix the hp playback volume issue for LG machines ASoC: soc-compress: Fix and add DPCM locking ASoC: SOF: amd: Skip IRAM/DRAM size modification for Steam Deck OLED ASoC: SOF: amd: Move signed_fw_image to struct acp_quirk_entry ASoC: amd: yc: Revert "add new YC platform variant (0x63) support" ASoC: amd: yc: Revert "Fix non-functional mic on Lenovo 21J2" ASoC: soc-core.c: Skip dummy codec when adding platforms ASoC: rockchip: i2s-tdm: Fix inaccurate sampling rates ASoC: dt-bindings: cirrus,cs42l43: Fix 'gpio-ranges' schema ASoC: amd: yc: Fix non-functional mic on ASUS M7600RE ASoC: tlv320adc3xxx: Don't strip remove function when driver is builtin
2024-03-22Merge tag 'i2c-for-6.9-rc1-part2' of ↵Linus Torvalds2-7/+44
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull more i2c updates from Wolfram Sang: "Some more I2C updates after the dependencies have been merged now. Plus a DT binding fix" * tag 'i2c-for-6.9-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: dt-bindings: i2c: qcom,i2c-cci: Fix OV7251 'data-lanes' entries i2c: muxes: pca954x: Allow sharing reset GPIO i2c: nomadik: sort includes i2c: nomadik: support Mobileye EyeQ5 I2C controller i2c: nomadik: fetch i2c-transfer-timeout-us property from devicetree i2c: nomadik: replace jiffies by ktime for FIFO flushing timeout i2c: nomadik: support short xfer timeouts using waitqueue & hrtimer i2c: nomadik: use bitops helpers i2c: nomadik: simplify IRQ masking logic i2c: nomadik: rename private struct pointers from dev to priv dt-bindings: i2c: nomadik: add mobileye,eyeq5-i2c bindings and example
2024-03-22Merge tag 'rtc-6.9' of ↵Linus Torvalds8-68/+202
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "Subsytem: - rtc_class is now const Drivers: - ds1511: cleanup, set date and time range and alarm offset limit - max31335: fix interrupt handler - pcf8523: improve suspend support" * tag 'rtc-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (28 commits) MAINTAINER: Include linux-arm-msm for Qualcomm RTC patches dt-bindings: rtc: zynqmp: Add support for Versal/Versal NET SoCs rtc: class: make rtc_class constant dt-bindings: rtc: abx80x: Improve checks on trickle charger constraints MAINTAINERS: adjust file entry in ARM/Mediatek RTC DRIVER rtc: nct3018y: fix possible NULL dereference rtc: max31335: fix interrupt status reg rtc: mt6397: select IRQ_DOMAIN instead of depending on it dt-bindings: rtc: abx80x: convert to yaml rtc: m41t80: Use the unified property API get the wakeup-source property dt-bindings: at91rm9260-rtt: add sam9x7 compatible dt-bindings: rtc: convert MT7622 RTC to the json-schema dt-bindings: rtc: convert MT2717 RTC to the json-schema rtc: pcf8523: add suspend handlers for alarm IRQ rtc: ds1511: set alarm offset limit rtc: ds1511: set range rtc: ds1511: drop inline/noinline hints rtc: ds1511: rename pdata rtc: ds1511: implement ds1511_rtc_read_alarm properly rtc: ds1511: remove partial alarm support ...
2024-03-22Merge tag 'ubifs-for-linus-6.9-rc1' of ↵Linus Torvalds3-0/+125
git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs Pull UBI and UBIFS updates from Richard Weinberger: "UBI: - Add Zhihao Cheng as reviewer - Attach via device tree - Add NVMEM layer - Various fastmap related fixes UBIFS: - Add Zhihao Cheng as reviewer - Convert to folios - Various fixes (memory leaks in error paths, function prototypes)" * tag 'ubifs-for-linus-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: (34 commits) mtd: ubi: fix NVMEM over UBI volumes on 32-bit systems mtd: ubi: provide NVMEM layer over UBI volumes mtd: ubi: populate ubi volume fwnode mtd: ubi: introduce pre-removal notification for UBI volumes mtd: ubi: attach from device tree mtd: ubi: block: use notifier to create ubiblock from parameter dt-bindings: mtd: ubi-volume: allow UBI volumes to provide NVMEM dt-bindings: mtd: add basic bindings for UBI ubifs: Queue up space reservation tasks if retrying many times ubifs: ubifs_symlink: Fix memleak of inode->i_link in error path ubifs: dbg_check_idx_size: Fix kmemleak if loading znode failed ubi: Correct the number of PEBs after a volume resize failure ubi: fix slab-out-of-bounds in ubi_eba_get_ldesc+0xfb/0x130 ubi: correct the calculation of fastmap size ubifs: Remove unreachable code in dbg_check_ltab_lnum ubifs: fix function pointer cast warnings ubifs: fix sort function prototype ubi: Check for too small LEB size in VTBL code MAINTAINERS: Add Zhihao Cheng as UBI/UBIFS reviewer ubifs: Convert populate_page() to take a folio ...
2024-03-22Merge tag 'net-6.9-rc1' of ↵Linus Torvalds3-30/+52
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from CAN, netfilter, wireguard and IPsec. I'd like to highlight [ lowlight? - Linus ] Florian W stepping down as a netfilter maintainer due to constant stream of bug reports. Not sure what we can do but IIUC this is not the first such case. Current release - regressions: - rxrpc: fix use of page_frag_alloc_align(), it changed semantics and we added a new caller in a different subtree - xfrm: allow UDP encapsulation only in offload modes Current release - new code bugs: - tcp: fix refcnt handling in __inet_hash_connect() - Revert "net: Re-use and set mono_delivery_time bit for userspace tstamp packets", conflicted with some expectations in BPF uAPI Previous releases - regressions: - ipv4: raw: fix sending packets from raw sockets via IPsec tunnels - devlink: fix devlink's parallel command processing - veth: do not manipulate GRO when using XDP - esp: fix bad handling of pages from page_pool Previous releases - always broken: - report RCU QS for busy network kthreads (with Paul McK's blessing) - tcp/rds: fix use-after-free on netns with kernel TCP reqsk - virt: vmxnet3: fix missing reserved tailroom with XDP Misc: - couple of build fixes for Documentation" * tag 'net-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (59 commits) selftests: forwarding: Fix ping failure due to short timeout MAINTAINERS: step down as netfilter maintainer netfilter: nf_tables: Fix a memory leak in nf_tables_updchain net: dsa: mt7530: fix handling of all link-local frames net: dsa: mt7530: fix link-local frames that ingress vlan filtering ports bpf: report RCU QS in cpumap kthread net: report RCU QS on threaded NAPI repolling rcu: add a helper to report consolidated flavor QS ionic: update documentation for XDP support lib/bitmap: Fix bitmap_scatter() and bitmap_gather() kernel doc netfilter: nf_tables: do not compare internal table flags on updates netfilter: nft_set_pipapo: release elements in clone only from destroy path octeontx2-af: Use separate handlers for interrupts octeontx2-pf: Send UP messages to VF only when VF is up. octeontx2-pf: Use default max_active works instead of one octeontx2-pf: Wait till detach_resources msg is complete octeontx2: Detect the mbox up or down message via register devlink: fix port new reply cmd type tcp: Clear req->syncookie in reqsk_alloc(). net/bnx2x: Prevent access to a freed page in page_pool ...
2024-03-22Merge tag 'kbuild-v6.9' of ↵Linus Torvalds2-202/+167
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Generate a list of built DTB files (arch/*/boot/dts/dtbs-list) - Use more threads when building Debian packages in parallel - Fix warnings shown during the RPM kernel package uninstallation - Change OBJECT_FILES_NON_STANDARD_*.o etc. to take a relative path to Makefile - Support GCC's -fmin-function-alignment flag - Fix a null pointer dereference bug in modpost - Add the DTB support to the RPM package - Various fixes and cleanups in Kconfig * tag 'kbuild-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (67 commits) kconfig: tests: test dependency after shuffling choices kconfig: tests: add a test for randconfig with dependent choices kconfig: tests: support KCONFIG_SEED for the randconfig runner kbuild: rpm-pkg: add dtb files in kernel rpm kconfig: remove unneeded menu_is_visible() call in conf_write_defconfig() kconfig: check prompt for choice while parsing kconfig: lxdialog: remove unused dialog colors kconfig: lxdialog: fix button color for blackbg theme modpost: fix null pointer dereference kbuild: remove GCC's default -Wpacked-bitfield-compat flag kbuild: unexport abs_srctree and abs_objtree kbuild: Move -Wenum-{compare-conditional,enum-conversion} into W=1 kconfig: remove named choice support kconfig: use linked list in get_symbol_str() to iterate over menus kconfig: link menus to a symbol kbuild: fix inconsistent indentation in top Makefile kbuild: Use -fmin-function-alignment when available alpha: merge two entries for CONFIG_ALPHA_GAMMA alpha: merge two entries for CONFIG_ALPHA_EV4 kbuild: change DTC_FLAGS_<basetarget>.o to take the path relative to $(obj) ...
2024-03-21Merge tag 'char-misc-6.9-rc1' of ↵Linus Torvalds35-100/+1430
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver subsystem updates from Greg KH: "Here is the big set of char/misc and a number of other driver subsystem updates for 6.9-rc1. Included in here are: - IIO driver updates, loads of new ones and evolution of existing ones - coresight driver updates - const cleanups for many driver subsystems - speakup driver additions - platform remove callback void cleanups - mei driver updates - mhi driver updates - cdx driver updates for MSI interrupt handling - nvmem driver updates - other smaller driver updates and cleanups, full details in the shortlog All of these have been in linux-next for a long time with no reported issue, other than a build warning for the speakup driver" The build warning hits clang and is a gcc (and C23) extension, and is fixed up in the merge. Link: https://lore.kernel.org/all/20240321134831.GA2762840@dev-arch.thelio-3990X/ * tag 'char-misc-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (279 commits) binder: remove redundant variable page_addr uio_dmem_genirq: UIO_MEM_DMA_COHERENT conversion uio_pruss: UIO_MEM_DMA_COHERENT conversion cnic,bnx2,bnx2x: use UIO_MEM_DMA_COHERENT uio: introduce UIO_MEM_DMA_COHERENT type cdx: add MSI support for CDX bus pps: use cflags-y instead of EXTRA_CFLAGS speakup: Add /dev/synthu device speakup: Fix 8bit characters from direct synth parport: sunbpp: Convert to platform remove callback returning void parport: amiga: Convert to platform remove callback returning void char: xillybus: Convert to platform remove callback returning void vmw_balloon: change maintainership MAINTAINERS: change the maintainer for hpilo driver char: xilinx_hwicap: Fix NULL vs IS_ERR() bug hpet: remove hpets::hp_clocksource platform: goldfish: move the separate 'default' propery for CONFIG_GOLDFISH char: xilinx_hwicap: drop casting to void in dev_set_drvdata greybus: move is_gb_* functions out of greybus.h greybus: Remove usage of the deprecated ida_simple_xx() API ...
2024-03-21Merge tag 'tty-6.9-rc1' of ↵Linus Torvalds13-19/+224
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial driver updates from Greg KH: "Here is the big set of TTY/Serial driver updates and cleanups for 6.9-rc1. Included in here are: - more tty cleanups from Jiri - loads of 8250 driver cleanups from Andy - max310x driver updates - samsung serial driver updates - uart_prepare_sysrq_char() updates for many drivers - platform driver remove callback void cleanups - stm32 driver updates - other small tty/serial driver updates All of these have been in linux-next for a long time with no reported issues" * tag 'tty-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (199 commits) dt-bindings: serial: stm32: add power-domains property serial: 8250_dw: Replace ACPI device check by a quirk serial: Lock console when calling into driver before registration serial: 8250_uniphier: Switch to use uart_read_port_properties() serial: 8250_tegra: Switch to use uart_read_port_properties() serial: 8250_pxa: Switch to use uart_read_port_properties() serial: 8250_omap: Switch to use uart_read_port_properties() serial: 8250_of: Switch to use uart_read_port_properties() serial: 8250_lpc18xx: Switch to use uart_read_port_properties() serial: 8250_ingenic: Switch to use uart_read_port_properties() serial: 8250_dw: Switch to use uart_read_port_properties() serial: 8250_bcm7271: Switch to use uart_read_port_properties() serial: 8250_bcm2835aux: Switch to use uart_read_port_properties() serial: 8250_aspeed_vuart: Switch to use uart_read_port_properties() serial: port: Introduce a common helper to read properties serial: core: Add UPIO_UNKNOWN constant for unknown port type serial: core: Move struct uart_port::quirks closer to possible values serial: sh-sci: Call sci_serial_{in,out}() directly serial: core: only stop transmit when HW fifo is empty serial: pch: Use uart_prepare_sysrq_char(). ...
2024-03-21Merge tag 'usb-6.9-rc1' of ↵Linus Torvalds30-70/+586
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt changes for 6.9-rc1. Lots of tiny changes and forward progress to support new hardware and better support for existing devices. Included in here are: - Thunderbolt (i.e. USB4) updates for newer hardware and uses as more people start to use the hardware - default USB authentication mode Kconfig and documentation update to make it more obvious what is going on - USB typec updates and enhancements - usual dwc3 driver updates - usual xhci driver updates - function USB (i.e. gadget) driver updates and additions - new device ids for lots of drivers - loads of other small updates, full details in the shortlog All of these, including a "last minute regression fix" have been in linux-next with no reported issues" * tag 'usb-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (185 commits) usb: usb-acpi: Fix oops due to freeing uninitialized pld pointer usb: gadget: net2272: Use irqflags in the call to net2272_probe_fin usb: gadget: tegra-xudc: Fix USB3 PHY retrieval logic phy: tegra: xusb: Add API to retrieve the port number of phy USB: gadget: pxa27x_udc: Remove unused of_gpio.h usb: gadget/snps_udc_plat: Remove unused of_gpio.h usb: ohci-pxa27x: Remove unused of_gpio.h usb: sl811-hcd: only defined function checkdone if QUIRK2 is defined usb: Clarify expected behavior of dev_bin_attrs_are_visible() xhci: Allow RPM on the USB controller (1022:43f7) by default usb: isp1760: remove SLAB_MEM_SPREAD flag usage usb: misc: onboard_hub: use pointer consistently in the probe function usb: gadget: fsl: Increase size of name buffer for endpoints usb: gadget: fsl: Add of device table to enable module autoloading usb: typec: tcpm: add support to set tcpc connector orientatition usb: typec: tcpci: add generic tcpci fallback compatible dt-bindings: usb: typec-tcpci: add tcpci fallback binding usb: gadget: fsl-udc: Replace custom log wrappers by dev_{err,warn,dbg,vdbg} usb: core: Set connect_type of ports based on DT node dt-bindings: usb: Add downstream facing ports to realtek binding ...
2024-03-21sched/doc: Update documentation for base_slice_ns and CONFIG_HZ relationMukesh Kumar Chaurasiya1-0/+3
The tunable base_slice_ns is dependent on CONFIG_HZ (i.e. TICK_NSEC) for any significant performance improvement. The reason being the scheduler tick is not frequent enough to force preemption when base_slice expires in case of: base_slice_ns < TICK_NSEC The below data is of stress-ng: Number of CPU: 1 Stressor threads: 4 Time: 30sec On CONFIG_HZ=1000 | base_slice | avg-run (msec) | context-switches | | ---------- | -------------- | ---------------- | | 3ms | 2.914 | 10342 | | 6ms | 4.857 | 6196 | | 9ms | 6.754 | 4482 | | 12ms | 7.872 | 3802 | | 22ms | 11.294 | 2710 | | 32ms | 13.425 | 2284 | On CONFIG_HZ=100 | base_slice | avg-run (msec) | context-switches | | ---------- | -------------- | ---------------- | | 3ms | 9.144 | 3337 | | 6ms | 9.113 | 3301 | | 9ms | 8.991 | 3315 | | 12ms | 12.935 | 2328 | | 22ms | 16.031 | 1915 | | 32ms | 18.608 | 1622 | base_slice: the value of base_slice in ms avg-run (msec): average time of the stressor threads got on cpu before it got preempted context-switches: number of context switches for the stress-ng process Signed-off-by: Mukesh Kumar Chaurasiya <mchauras@linux.ibm.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20240320173815.927637-2-mchauras@linux.ibm.com
2024-03-21Merge tag 'rproc-v6.9' of ↵Linus Torvalds13-14/+62
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux Pull remoteproc updates from Bjorn Andersson: "Qualcomm SM8650 audio, compute and modem remoteproc are added. Qualcomm X1 Elite audio and compute remoteprocs are added, after support for shutting down the bootloader-loaded firmware loaded into the audio DSP.. A dozen drivers in the subsystem are transitioned to use devres helpers for remoteproc and memory allocations - this makes it possible to acquire in-kernel handle to individual remoteproc instances in a cluster. The release of DMA memory for remoteproc virtio is corrected to ensure that restarting due to a watchdog bite doesn't attempt to allocate the memory again without first freeing it. Last, but not least, a couple of DeviceTree binding cleanups" * tag 'rproc-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (30 commits) remoteproc: qcom_q6v5_pas: Unload lite firmware on ADSP remoteproc: qcom_q6v5_pas: Add support for X1E80100 ADSP/CDSP dt-bindings: remoteproc: qcom,sm8550-pas: document the X1E80100 aDSP & cDSP remoteproc: qcom_wcnss: Use devm_rproc_alloc() helper remoteproc: qcom_q6v5_wcss: Use devm_rproc_alloc() helper remoteproc: qcom_q6v5_pas: Use devm_rproc_alloc() helper remoteproc: qcom_q6v5_mss: Use devm_rproc_alloc() helper remoteproc: qcom_q6v5_adsp: Use devm_rproc_alloc() helper dt-bindings: remoteproc: do not override firmware-name $ref dt-bindings: remoteproc: qcom,glink-rpm-edge: drop redundant type from label remoteproc: qcom: pas: correct data indentation remoteproc: Make rproc_get_by_phandle() work for clusters remoteproc: qcom: pas: Add SM8650 remoteproc support remoteproc: qcom: pas: make region assign more generic dt-bindings: remoteproc: qcom,sm8550-pas: document the SM8650 PAS remoteproc: k3-dsp: Use devm_rproc_add() helper remoteproc: k3-dsp: Use devm_ioremap_wc() helper remoteproc: k3-dsp: Add devm action to release tsp remoteproc: k3-dsp: Use devm_kzalloc() helper remoteproc: k3-dsp: Use devm_ti_sci_get_by_phandle() helper ...
2024-03-21Merge tag 'asoc-fix-v6.9-merge-window' of ↵Takashi Iwai12-29/+374
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v6.9 A bunch of fixes that came in during the merge window, probably the most substantial thing is the DPCM locking fix for compressed audio which has been lurking for a while.
2024-03-21ionic: update documentation for XDP supportShannon Nelson1-0/+22
Add information to our documentation for the XDP features and related ethtool stats. While we're here, we also add the missing timestamp stats. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240319163534.38796-1-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-21Merge tag 'trace-tools-v6.9' of ↵Linus Torvalds1-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull trace tool updates from Steven Rostedt: "Tracing: - Update makefiles for latency-collector and RTLA, using tools/build/ makefiles like perf does, inheriting its benefits. For example, having a proper way to handle library dependencies. - The timerlat tracer has an interface for any tool to use. rtla timerlat tool uses this interface dispatching its own threads as workload. But, rtla timerlat could also be used for any other process. So, add 'rtla timerlat -U' option, allowing the timerlat tool to measure the latency of any task using the timerlat tracer interface. Verification: - Update makefiles for verification/rv, using tools/build/ makefiles like perf does, inheriting its benefits. For example, having a proper way to handle dependencies" * tag 'trace-tools-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tools/rtla: Add -U/--user-load option to timerlat tools/verification: Use tools/build makefiles on rv tools/rtla: Use tools/build makefiles to build rtla tools/tracing: Use tools/build makefiles on latency-collector
2024-03-20Merge tag 'docs-6.9-2' of git://git.lwn.net/linuxLinus Torvalds4-186/+219
Pull more documentation updates from Jonathan Corbet: "A handful of late-arriving documentation fixes and enhancements" * tag 'docs-6.9-2' of git://git.lwn.net/linux: docs: verify/bisect: remove a level of indenting docs: verify/bisect: drop 'v' prefix, EOL aspect, and assorted fixes docs: verify/bisect: check taint flag docs: verify/bisect: improve install instructions docs: handling-regressions.rst: Update regzbot command fixed-by to fix docs: *-regressions.rst: Add colon to regzbot commands doc: Fix typo in admin-guide/cifs/introduction.rst README: Fix spelling
2024-03-20dt-bindings: i2c: qcom,i2c-cci: Fix OV7251 'data-lanes' entriesRob Herring1-1/+1
The OV7251 sensor only has a single data lane, so 2 entries is not valid. Fix this to be 1 entry as the schema specifies. The schema validation doesn't catch this currently due to some limitations in handling of arrays vs. matrices, but a fix is being worked on. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2024-03-20Merge tag 'i2c-host-6.9-part2' of ↵Wolfram Sang1-6/+43
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow Théo adds support for the Mobileye EyeQ5-I2C in the bindings. This patch is followed by eight commits featuring improvements to the Nomadik controller, such as simplification of the IRQ logic, renaming of the private data structure, more efficient use of FIELD_PREP/GET, GENMASK, etc., better time measurement with ktime, and more.
2024-03-20tools/rtla: Add -U/--user-load option to timerlatDaniel Bristot de Oliveira1-0/+6
The timerlat tracer provides an interface for any application to wait for the timerlat's periodic wakeup. Currently, rtla timerlat uses it to dispatch its user-space workload (-u option). But as the tracer interface is generic, rtla timerlat can also be used to monitor any workload that uses it. For example, a user might place their own workload to wait on the tracer interface, and monitor the results with rtla timerlat. Add the -U option to rtla timerlat top and hist. With this option, rtla timerlat will not dispatch its workload but only setting up the system, waiting for a user to dispatch its workload. The sample code in this patch is an example of python application that loops in the timerlat tracer fd. To use it, dispatch: # rtla timerlat -U In a terminal, then run the python program on another terminal, specifying the CPU to run it. For example, setting on CPU 1: #./timerlat_load.py 1 Then rtla timerlat will start printing the statistics of the ./timerlat_load.py app. An interesting point is that the "Ret user Timer Latency" value is the overall response time of the load. The sample load does a memory copy to exemplify that. The stop tracing options on rtla timerlat works in this setup as well, including auto analysis. Link: https://lkml.kernel.org/r/36e6bcf18fe15c7601048fd4c65aeb193c502cc8.1707229706.git.bristot@kernel.org Cc: Jonathan Corbet <corbet@lwn.net> Cc: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
2024-03-19Merge tag 'soc-late-6.9' of ↵Linus Torvalds4-0/+96
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull more ARM SoC updates from Arnd Bergmann: "These are changes that for some reason ended up not making it into the first four branches but that should still make it into 6.9: - A rework of the omap clock support that touches both drivers and device tree files - The reset controller branch changes that had a dependency on late bugfixes. Merging them here avoids a backmerge of 6.8-rc5 into the drivers branch - The RISC-V/starfive, RISC-V/microchip and ARM/Broadcom devicetree changes that got delayed and needed some extra time in linux-next for wider testing" * tag 'soc-late-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (31 commits) soc: fsl: dpio: fix kcalloc() argument order bus: ts-nbus: Improve error reporting bus: ts-nbus: Convert to atomic pwm API riscv: dts: starfive: jh7110: Add camera subsystem nodes ARM: bcm: stop selecing CONFIG_TICK_ONESHOT ARM: dts: omap3: Update clksel clocks to use reg instead of ti,bit-shift ARM: dts: am3: Update clksel clocks to use reg instead of ti,bit-shift clk: ti: Improve clksel clock bit parsing for reg property clk: ti: Handle possible address in the node name dt-bindings: pwm: opencores: Add compatible for StarFive JH8100 dt-bindings: riscv: cpus: reg matches hart ID reset: Instantiate reset GPIO controller for shared reset-gpios reset: gpio: Add GPIO-based reset controller cpufreq: do not open-code of_phandle_args_equal() of: Add of_phandle_args_equal() helper reset: simple: add support for Sophgo SG2042 dt-bindings: reset: sophgo: support SG2042 riscv: dts: microchip: add specific compatible for mpfs pdma riscv: dts: microchip: add missing CAN bus clocks ARM: brcmstb: Add debug UART entry for 74165 ...
2024-03-19spi: docs: spidev: fix echo command formatDavid Lechner1-1/+1
The two example echo commands for binding the spidev driver were being rendered as one line in the HTML output. This patch makes use of the restructured text :: to format the commands as a code block instead which preserves the line break. Signed-off-by: David Lechner <dlechner@baylibre.com> Link: https://msgid.link/r/20240319183344.2106335-1-dlechner@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-03-19Merge tag 'pm-6.9-rc1-2' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management updates from Rafael Wysocki: "These update the Energy Model to make it prevent errors due to power unit mismatches, fix a typo in power management documentation, convert one driver to using a platform remove callback returning void, address two cpufreq issues (one in the core and one in the DT driver), and enable boost support in the SCMI cpufreq driver. Specifics: - Modify the Energy Model code to bail out and complain if the unit of power is not uW to prevent errors due to unit mismatches (Lukasz Luba) - Make the intel_rapl platform driver use a remove callback returning void (Uwe Kleine-König) - Fix typo in the suspend and interrupts document (Saravana Kannan) - Make per-policy boost flags actually take effect on platforms using cpufreq_boost_set_sw() (Sibi Sankar) - Enable boost support in the SCMI cpufreq driver (Sibi Sankar) - Make the DT cpufreq driver use zalloc_cpumask_var() for allocating cpumasks to avoid using unitinialized memory (Marek Szyprowski)" * tag 'pm-6.9-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: scmi: Enable boost support firmware: arm_scmi: Add support for marking certain frequencies as turbo cpufreq: dt: always allocate zeroed cpumask cpufreq: Fix per-policy boost behavior on SoCs using cpufreq_boost_set_sw() Documentation: power: Fix typo in suspend and interrupts doc PM: EM: Force device drivers to provide power in uW powercap: intel_rapl: Convert to platform remove callback returning void
2024-03-19Merge tag 'acpi-6.9-rc1-2' of ↵Linus Torvalds1-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more ACPI updates from Rafael Wysocki: "These update ACPI documentation and kerneldoc comments. Specifics: - Add markup to generate links from footnotes in the ACPI enumeration document (Chris Packham) - Update the handle_eject_request() kerneldoc comment to document the arguments of the function and improve kerneldoc comments for ACPI suspend and hibernation functions (Yang Li)" * tag 'acpi-6.9-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: PM: Improve kerneldoc comments for suspend and hibernation functions ACPI: docs: enumeration: Make footnotes links ACPI: Document handle_eject_request() arguments
2024-03-19Merge tag 'thermal-6.9-rc1-2' of ↵Linus Torvalds4-14/+27
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more thermal control updates from Rafael Wysocki: "These update thermal drivers for ARM platforms by adding new hardware support (r8a779h0, H616 THS), addressing issues (Mediatek LVTS, Mediatek MT7896, thermal-of) and cleaning up code. Specifics: - Fix memory leak in the error path at probe time in the Mediatek LVTS driver (Christophe Jaillet) - Fix control buffer enablement regression on Meditek MT7896 (Frank Wunderlich) - Drop spaces before TABs in different places: thermal-of, ST drivers and Makefile (Geert Uytterhoeven) - Adjust DT binding for NXP as fsl,tmu-range min/maxItems can vary among several SoC versions (Fabio Estevam) - Add support for the H616 THS controller on Sun8i platforms (Martin Botka) - Don't fail probe due to zone registration failure because there is no trip points defined in the DT (Mark Brown) - Support variable TMU array size for new platforms (Peng Fan) - Adjust the DT binding for thermal-of and make the polling time not required and assume it is zero when not found in the DT (Konrad Dybcio) - Add r8a779h0 support in both the DT and the rcar_gen3 driver (Geert Uytterhoeven)" * tag 'thermal-6.9-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal/drivers/rcar_gen3: Add support for R-Car V4M dt-bindings: thermal: rcar-gen3-thermal: Add r8a779h0 support thermal/of: Assume polling-delay(-passive) 0 when absent dt-bindings: thermal-zones: Don't require polling-delay(-passive) thermal/drivers/qoriq: Fix getting tmu range thermal/drivers/sun8i: Don't fail probe due to zone registration failure thermal/drivers/sun8i: Add support for H616 THS controller thermal/drivers/sun8i: Add SRAM register access code thermal/drivers/sun8i: Extend H6 calibration to support 4 sensors thermal/drivers/sun8i: Explain unknown H6 register value dt-bindings: thermal: sun8i: Add H616 THS controller soc: sunxi: sram: export register 0 for THS on H616 dt-bindings: thermal: qoriq-thermal: Adjust fsl,tmu-range min/maxItems thermal: Drop spaces before TABs thermal/drivers/mediatek: Fix control buffer enablement on MT7896 thermal/drivers/mediatek/lvts_thermal: Fix a memory leak in an error handling path
2024-03-19net: move dev->state into net_device_read_txrx groupEric Dumazet1-1/+1
dev->state can be read in rx and tx fast paths. netif_running() which needs dev->state is called from - enqueue_to_backlog() [RX path] - __dev_direct_xmit() [TX path] Fixes: 43a71cd66b9c ("net-device: reorganize net_device fast path variables") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Coco Li <lixiaoyan@google.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20240314200845.3050179-1-edumazet@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-03-19Merge tag 'trace-v6.9-2' of ↵Linus Torvalds3-12/+71
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing updates from Steven Rostedt: "Main user visible change: - User events can now have "multi formats" The current user events have a single format. If another event is created with a different format, it will fail to be created. That is, once an event name is used, it cannot be used again with a different format. This can cause issues if a library is using an event and updates its format. An application using the older format will prevent an application using the new library from registering its event. A task could also DOS another application if it knows the event names, and it creates events with different formats. The multi-format event is in a different name space from the single format. Both the event name and its format are the unique identifier. This will allow two different applications to use the same user event name but with different payloads. - Added support to have ftrace_dump_on_oops dump out instances and not just the main top level tracing buffer. Other changes: - Add eventfs_root_inode Only the root inode has a dentry that is static (never goes away) and stores it upon creation. There's no reason that the thousands of other eventfs inodes should have a pointer that never gets set in its descriptor. Create a eventfs_root_inode desciptor that has a eventfs_inode descriptor and a dentry pointer, and only the root inode will use this. - Added WARN_ON()s in eventfs There's some conditionals remaining in eventfs that should never be hit, but instead of removing them, add WARN_ON() around them to make sure that they are never hit. - Have saved_cmdlines allocation also include the map_cmdline_to_pid array The saved_cmdlines structure allocates a large amount of data to hold its mappings. Within it, it has three arrays. Two are already apart of it: map_pid_to_cmdline[] and saved_cmdlines[]. More memory can be saved by also including the map_cmdline_to_pid[] array as well. - Restructure __string() and __assign_str() macros used in TRACE_EVENT() Dynamic strings in TRACE_EVENT() are declared with: __string(name, source) And assigned with: __assign_str(name, source) In the tracepoint callback of the event, the __string() is used to get the size needed to allocate on the ring buffer and __assign_str() is used to copy the string into the ring buffer. There's a helper structure that is created in the TRACE_EVENT() macro logic that will hold the string length and its position in the ring buffer which is created by __string(). There are several trace events that have a function to create the string to save. This function is executed twice. Once for __string() and again for __assign_str(). There's no reason for this. The helper structure could also save the string it used in __string() and simply copy that into __assign_str() (it also already has its length). By using the structure to store the source string for the assignment, it means that the second argument to __assign_str() is no longer needed. It will be removed in the next merge window, but for now add a warning if the source string given to __string() is different than the source string given to __assign_str(), as the source to __assign_str() isn't even used and will be going away. - Added checks to make sure that the source of __string() is also the source of __assign_str() so that it can be safely removed in the next merge window. Included fixes that the above check found. - Other minor clean ups and fixes" * tag 'trace-v6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (34 commits) tracing: Add __string_src() helper to help compilers not to get confused tracing: Use strcmp() in __assign_str() WARN_ON() check tracepoints: Use WARN() and not WARN_ON() for warnings tracing: Use div64_u64() instead of do_div() tracing: Support to dump instance traces by ftrace_dump_on_oops tracing: Remove second parameter to __assign_rel_str() tracing: Add warning if string in __assign_str() does not match __string() tracing: Add __string_len() example tracing: Remove __assign_str_len() ftrace: Fix most kernel-doc warnings tracing: Decrement the snapshot if the snapshot trigger fails to register tracing: Fix snapshot counter going between two tracers that use it tracing: Use EVENT_NULL_STR macro instead of open coding "(null)" tracing: Use ? : shortcut in trace macros tracing: Do not calculate strlen() twice for __string() fields tracing: Rework __assign_str() and __string() to not duplicate getting the string cxl/trace: Properly initialize cxl_poison region name net: hns3: tracing: fix hclgevf trace event strings drm/i915: Add missing ; to __assign_str() macros in tracepoint code NFSD: Fix nfsd_clid_class use of __string_len() macro ...
2024-03-18Merge tag 'f2fs-for-6.9-rc1' of ↵Linus Torvalds2-53/+53
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs Pull f2fs update from Jaegeuk Kim: "In this round, there are a number of updates on mainly two areas: Zoned block device support and Per-file compression. For example, we've found several issues to support Zoned block device especially having large sections regarding to GC and file pinning used for Android devices. In compression side, we've fixed many corner race conditions that had broken the design assumption. Enhancements: - Support file pinning for Zoned block device having large section - Enhance the data recovery after sudden power cut on Zoned block device - Add more error injection cases to easily detect the kernel panics - add a proc entry show the entire disk layout - Improve various error paths paniced by BUG_ON in block allocation and GC - support SEEK_DATA and SEEK_HOLE for compression files Bug fixes: - avoid use-after-free issue in f2fs_filemap_fault - fix some race conditions to break the atomic write design assumption - fix to truncate meta inode pages forcely - resolve various per-file compression issues wrt the space management and compression policies - fix some swap-related bugs In addition, we removed deprecated codes such as io_bits and heap_allocation, and also fixed minor error handling routines with neat debugging messages" * tag 'f2fs-for-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (60 commits) f2fs: fix to avoid use-after-free issue in f2fs_filemap_fault f2fs: truncate page cache before clearing flags when aborting atomic write f2fs: mark inode dirty for FI_ATOMIC_COMMITTED flag f2fs: prevent atomic write on pinned file f2fs: fix to handle error paths of {new,change}_curseg() f2fs: unify the error handling of f2fs_is_valid_blkaddr f2fs: zone: fix to remove pow2 check condition for zoned block device f2fs: fix to truncate meta inode pages forcely f2fs: compress: fix reserve_cblocks counting error when out of space f2fs: compress: relocate some judgments in f2fs_reserve_compress_blocks f2fs: add a proc entry show disk layout f2fs: introduce SEGS_TO_BLKS/BLKS_TO_SEGS for cleanup f2fs: fix to check return value of f2fs_gc_range f2fs: fix to check return value __allocate_new_segment f2fs: fix to do sanity check in update_sit_entry f2fs: fix to reset fields for unloaded curseg f2fs: clean up new_curseg() f2fs: relocate f2fs_precache_extents() in f2fs_swap_activate() f2fs: fix blkofs_end correctly in f2fs_migrate_blocks() f2fs: ro: don't start discard thread for readonly image ...
2024-03-18spi: Merge up v6.8 releaseMark Brown36-89/+571
An i.MX fix depends on other fixes that were sent to v6.8.
2024-03-18spi: lm70llp: fix links in doc and commentsKousik Sanagavarapu1-2/+2
Update links in the documentation and in-code comments which point to the datasheet and schematic. The current links don't work because National Semiconductor (which is the manufacturer of this board and lm70) has been a part of Texas Instruments since 2011 and hence http://www.national.com/ doesn't work anymore. Fixes: 78961a574037 ("spi_lm70llp parport adapter driver") Fixes: 2b7300513b98 ("hwmon: (lm70) Code streamlining and cleanup") Signed-off-by: Kousik Sanagavarapu <five231003@gmail.com> Link: https://msgid.link/r/20240318154540.90613-2-five231003@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-03-18tracing: Support to dump instance traces by ftrace_dump_on_oopsHuang Yiwei2-11/+45
Currently ftrace only dumps the global trace buffer on an OOPs. For debugging a production usecase, instance trace will be helpful to check specific problems since global trace buffer may be used for other purposes. This patch extend the ftrace_dump_on_oops parameter to dump a specific or multiple trace instances: - ftrace_dump_on_oops=0: as before -- don't dump - ftrace_dump_on_oops[=1]: as before -- dump the global trace buffer on all CPUs - ftrace_dump_on_oops=2 or =orig_cpu: as before -- dump the global trace buffer on CPU that triggered the oops - ftrace_dump_on_oops=<instance_name>: new behavior -- dump the tracing instance matching <instance_name> - ftrace_dump_on_oops[=2/orig_cpu],<instance1_name>[=2/orig_cpu], <instrance2_name>[=2/orig_cpu]: new behavior -- dump the global trace buffer and multiple instance buffer on all CPUs, or only dump on CPU that triggered the oops if =2 or =orig_cpu is given Also, the sysctl node can handle the input accordingly. Link: https://lore.kernel.org/linux-trace-kernel/20240223083126.1817731-1-quic_hyiwei@quicinc.com Cc: Ross Zwisler <zwisler@google.com> Cc: <mhiramat@kernel.org> Cc: <mark.rutland@arm.com> Cc: <mcgrof@kernel.org> Cc: <keescook@chromium.org> Cc: <j.granados@samsung.com> Cc: <mathieu.desnoyers@efficios.com> Cc: <corbet@lwn.net> Signed-off-by: Huang Yiwei <quic_hyiwei@quicinc.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2024-03-18tracing/user_events: Document multi-format flagBeau Belgrave1-1/+26
User programs can now ask user_events to handle the synchronization of multiple different formats for an event with the same name via the new USER_EVENT_REG_MULTI_FORMAT flag. Add a section for USER_EVENT_REG_MULTI_FORMAT that explains the intended purpose and caveats of using it. Explain how deletion works in these cases and how to use /sys/kernel/tracing/dynamic_events for per-version deletion. Link: https://lore.kernel.org/linux-trace-kernel/20240222001807.1463-5-beaub@linux.microsoft.com Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2024-03-18Merge tag 'timers-v6.9-rc1' of ↵Thomas Gleixner6-5/+81
https://git.linaro.org/people/daniel.lezcano/linux into timers/core Pull clocksource/event driver updates from Daniel Lezcano: - Fix -Wunused-but-set-variable warning for the iMX GPT timer (Daniel Lezcano) - Add Pixel6 compatible string for Exynos 4210 MCT timer (Peter Griffin) - Fix all kernel-doc warnings and misuse of comment format (Randy Dunlap) - Document in the DT bindings the interrupt used for input capture interrupt and udpate the example to match the reality (Geert Uytterhoeven) - Document RZ/Five SoC DT bindings (Lad Prabhakar) - Add DT bindings support for the i.MX95, reorganize the driver to move globale variables to a timer private structure and introduce the i.MX95 timer support (Peng Fan) - Fix prescalar value to conform to the ARM global timer documentation. Fix data types and comparison, guard the divide by zero code section and use the available macros for bit manipulation (Martin Blumenstingl) - Add Ralink SoCs system tick counter (Sergio Paracuellos) - Add support for cadence TTC PWM (Mubin Sayyed) - Clear timer interrupt on timer initialization to prevent the interrupt to fire during setup (Ley Foon Tan) Link: https://lore.kernel.org/r/5552010a-1ce2-46a1-a740-a69f2e9a2cf2@linaro.org
2024-03-18docs: verify/bisect: remove a level of indentingThorsten Leemhuis1-57/+57
Remove a unnecessary level of indenting in some areas of the reference section. No text changes. Signed-off-by: Thorsten Leemhuis <linux@leemhuis.info> Signed-off-by: Jonathan Corbet <corbet@lwn.net> Message-ID: <01f1a407e92b92d9f8614bd34882956694bab123.1710750972.git.linux@leemhuis.info>
2024-03-18docs: verify/bisect: drop 'v' prefix, EOL aspect, and assorted fixesThorsten Leemhuis1-55/+62
A bunch of minor fixes and improvements and two other things: - Explain the 'v' version prefix when it's first used, but drop it everywhere in the text for consistency. Also drop single quotes around a few version numbers. - Point out that testing a stable/longterm kernel only makes sense if the series is still supported. Signed-off-by: Thorsten Leemhuis <linux@leemhuis.info> Signed-off-by: Jonathan Corbet <corbet@lwn.net> Message-ID: <f13d203d5975419608996300992eaa2e4fcc2dc1.1710750972.git.linux@leemhuis.info>
2024-03-18docs: verify/bisect: check taint flagThorsten Leemhuis1-15/+49
Instruct readers to check the taint flag, as the reason why it's set might directly or indirectly cause the bug or interfere with testing. Signed-off-by: Thorsten Leemhuis <linux@leemhuis.info> Signed-off-by: Jonathan Corbet <corbet@lwn.net> Message-ID: <8fcaffa8e85f36d51178d61061355c3c8bc85a0f.1710750972.git.linux@leemhuis.info>
2024-03-18docs: verify/bisect: improve install instructionsThorsten Leemhuis1-65/+57
These changes among others ensure modules will be installed when /sbin/installkernel is missing. Furthermore describe better what tasks the script ideally performs so that users can more easily check if those have been taken care of. In addition to that point to the distro's documentation for further details on installing kernels manually. Signed-off-by: Thorsten Leemhuis <linux@leemhuis.info> Signed-off-by: Jonathan Corbet <corbet@lwn.net> Message-ID: <e392bd5eb12654bed635f32b24304a712b0c67d1.1710750972.git.linux@leemhuis.info>
2024-03-18docs: handling-regressions.rst: Update regzbot command fixed-by to fixNícolas F. R. A. Prado1-1/+1
On the reference documentation for regzbot, the fixed-by command has been renamed to fix. Update the kernel documentation accordingly. Link: https://gitlab.com/knurd42/regzbot/-/blob/main/docs/reference.md Link: https://gitlab.com/knurd42/regzbot/-/commit/6d8d30f6bda84e1b711121bb98a07a464d3f089a Reviewed-by: Thorsten Leemhuis <linux@leemhuis.info> Signed-off-by: "Nícolas F. R. A. Prado" <nfraprado@collabora.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> Message-ID: <20240311-regzbot-fixes-v2-2-98c1b6ec0678@collabora.com>
2024-03-18docs: *-regressions.rst: Add colon to regzbot commandsNícolas F. R. A. Prado2-6/+6
Use colon as command terminator everywhere for consistency, even though it's not strictly necessary. That way it will also match regzbot's reference documentation. Link: https://gitlab.com/knurd42/regzbot/-/blob/main/docs/reference.md Reviewed-by: Thorsten Leemhuis <linux@leemhuis.info> Signed-off-by: "Nícolas F. R. A. Prado" <nfraprado@collabora.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> Message-ID: <20240311-regzbot-fixes-v2-1-98c1b6ec0678@collabora.com>
2024-03-18doc: Fix typo in admin-guide/cifs/introduction.rstKendra Moore1-1/+1
This patch corrects a spelling error specifically the word "supports" was misspelled "suppors". No functional changes are made by this patch; it only improves the accuracy and readability of the documentation. Signed-off-by: Kendra Moore <kendra.j.moore3443@gmail.com> Reviewed-by: "Matthew Wilcox (Oracle)" <willy@infradead.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net> Message-ID: <20240312084753.27122-1-kendra.j.moore3443@gmail.com>
2024-03-18Merge tag 'i3c/for-6.9' of ↵Linus Torvalds6-7/+7
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux Pull i3c updates from Alexandre Belloni: "Not much this cycle with only three patches. Core: - i3c_bus_type is now const Drivers: - dw: disabling IBI is only allowed when hot join and SIR are disabled" * tag 'i3c/for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: i3c: Make i3c_bus_type const i3c: dw: Disable IBI IRQ depends on hot-join and SIR enabling dt-bindings: i3c: drop "master" node name suffix
2024-03-17Merge tag 'linux-watchdog-6.9-rc1' of ↵Linus Torvalds6-32/+109
git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - Remove usage of the deprecated ida_simple_xx() API - Add kernel-doc for wdt_set_timeout() - Add support for R-Car V4M, StarFive's JH8100 and sam9x7-wdt - Fixes and small improvements * tag 'linux-watchdog-6.9-rc1' of git://www.linux-watchdog.org/linux-watchdog: watchdog: intel-mid_wdt: Get platform data via dev_get_platdata() watchdog: intel-mid_wdt: Don't use "proxy" headers watchdog: intel-mid_wdt: Remove unused intel-mid.h dt-bindings: watchdog: sama5d4-wdt: add compatible for sam9x7-wdt dt-bindings: watchdog: sprd,sp9860-wdt: convert to YAML dt-bindings: watchdog: starfive,jh7100-wdt: Add compatible for JH8100 watchdog: stm32_iwdg: initialize default timeout dt-bindings: watchdog: arm,sp805: document the reset signal watchdog: sp805_wdt: deassert the reset if available watchdog/hpwdt: Support Suspend and Resume dt-bindings: watchdog: renesas-wdt: Add support for R-Car V4M watchdog: starfive: check watchdog status before enabling in system resume watchdog: starfive: Check pm_runtime_enabled() before decrementing usage counter watchdog: qcom: fine tune the max timeout value calculation watchdog: Add kernel-doc for wdt_set_timeout() watchdog: core: Remove usage of the deprecated ida_simple_xx() API
2024-03-17Merge tag 'input-for-v6.9-rc0' of ↵Linus Torvalds11-122/+303
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - a new driver for Goodix Berlin I2C and SPI touch controllers - support for IQS7222D v1.1 and v1.2 in iqs7222 driver - support for IST3032C and IST3038B parts in Imagis touchscreen driver - support for touch keys for Imagis touchscreen controllers - support for Snakebyte GAMEPADs in xpad driver - various cleanups and conversions to yaml for device tree bindings - assorted fixes and cleanups - old Synaptics navpoint driver has been removed since the only board that used it (HP iPAQ hx4700) was removed a while ago. * tag 'input-for-v6.9-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (37 commits) Input: xpad - add support for Snakebyte GAMEPADs dt-bindings: input: samsung,s3c6410-keypad: convert to DT Schema Input: imagis - add touch key support dt-bindings: input: imagis: Document touch keys Input: imagis - use FIELD_GET where applicable Input: make input_class constant dt-bindings: input: atmel,captouch: convert bindings to YAML Input: iqs7222 - add support for IQS7222D v1.1 and v1.2 dt-bindings: input: allwinner,sun4i-a10-lrad: drop redundant type from label Input: serio - make serio_bus const Input: synaptics-rmi4 - make rmi_bus_type const Input: xilinx_ps2 - fix kernel-doc for xps2_of_probe function input/touchscreen: imagis: add support for IST3032C dt-bindings: input/touchscreen: imagis: add compatible for IST3032C input/touchscreen: imagis: Add support for Imagis IST3038B dt-bindings: input/touchscreen: Add compatible for IST3038B input/touchscreen: imagis: Correct the maximum touch area value Input: leds - change config symbol dependency for audio mute trigger Input: ti_am335x_tsc - remove redundant assignment to variable config Input: xpad - sort xpad_device by vendor and product ID ...
2024-03-16Merge tag 'phy-for-6.9' of ↵Linus Torvalds7-51/+390
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy Pull phy updates from Vinod Koul: "New hardware support: - Qualcomm X1E80100 PCIe phy support, SM8550 PCIe1 PHY, SC7180 UFS PHY and SDM630 USBC support - Rockchip HDMI/eDP Combo PHY driver - Mediatek MT8365 CSI phy driver Updates: - Rework on Qualcomm phy PCS registers and type-c handling - Cadence torrent phy updates for multilink configuration - TI gmii resume support" * tag 'phy-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (41 commits) phy: constify of_phandle_args in xlate phy: ti: tusb1210: Define device IDs phy: ti: tusb1210: Use temporary variable for struct device phy: rockchip: Add Samsung HDMI/eDP Combo PHY driver dt-bindings: phy: Add Rockchip HDMI/eDP Combo PHY schema phy: ti: gmii-sel: add resume support phy: mtk-mipi-csi: add driver for CSI phy dt-bindings: phy: add mediatek MIPI CD-PHY module v0.5 phy: cadence-torrent: Add USXGMII(156.25MHz) + SGMII/QSGMII(100MHz) multilink config for TI J7200 dt-bindings: phy: cadence-torrent: Add a separate compatible for TI J7200 phy: cadence-torrent: Add USXGMII(156.25MHz) + SGMII/QSGMII(100MHz) multilink configuration phy: cadence-torrent: Add PCIe(100MHz) + USXGMII(156.25MHz) multilink configuration dt-bindings: phy: cadence-torrent: Add optional input reference clock for PLL1 phy: qcom-qmp-ufs: Switch to devm_clk_bulk_get_all() API dt-bindings: phy: qmp-ufs: Fix PHY clocks phy: qcom: sgmii-eth: move PCS registers to separate header phy: qcom: sgmii-eth: use existing register definitions phy: qcom: qmp-usbc: drop has_pwrdn_delay handling phy: qcom: qmp: move common bits definitions to common header phy: qcom: qmp: split DP PHY registers to separate headers ...
2024-03-16Merge tag 'cxl-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxlLinus Torvalds3-0/+102
Pull CXL updates from Dan Williams: "CXL has mechanisms to enumerate the performance characteristics of memory devices. Those mechanisms allow Linux to build the equivalent of ACPI SRAT, SLIT, and HMAT tables dynamically at runtime. That capability is necessary because static ACPI can not represent dynamic CXL configurations (and reconfigurations). So, building on the v6.8 work to add "Quality of Service" enumeration, this update plumbs CXL "access coordinates" (read/write access latency and bandwidth) in all the same places that ACPI HMAT feeds similar data. Follow-on patches from the -mm side can then use that data to feed mechanisms like mm/memory-tiers.c. Greg has acked the touch to drivers/base/. The other feature update this cycle is support for CXL error injection via the ACPI EINJ module. That facility enables injection of bus protocol errors provided the user knows the magic address values to insert in the interface. To hide that magic, and make this easier to use, new error injection attributes were added to CXL debugfs. That interface injects the errors relative to a CXL object rather than require user tooling to know how to lookup and inject RCRB (Root Complex Register Block) addresses into the raw EINJ debugfs interface. It received some helpful review comments from Tony, but no explicit acks from the ACPI side. The primary user visible change for existing EINJ users is that they may find that einj.ko was already loaded by cxl_core.ko. Previously, einj.ko was only loaded on demand. The usual collection of miscellaneous cleanups are also present this cycle. Summary: - Supplement ACPI HMAT reported memory performance with native CXL memory performance enumeration - Add support for CXL error injection via the ACPI EINJ mechanism - Cleanup CXL DOE and CDAT integration - Miscellaneous cleanups and fixes" * tag 'cxl-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (21 commits) Documentation/ABI/testing/debugfs-cxl: Fix "Unexpected indentation" lib/firmware_table: Provide buffer length argument to cdat_table_parse() cxl/pci: Get rid of pointer arithmetic reading CDAT table cxl/pci: Rename DOE mailbox handle to doe_mb cxl: Fix the incorrect assignment of SSLBIS entry pointer initial location cxl/core: Add CXL EINJ debugfs files EINJ, Documentation: Update EINJ kernel doc EINJ: Add CXL error type support EINJ: Migrate to a platform driver cxl/region: Deal with numa nodes not enumerated by SRAT cxl/region: Add memory hotplug notifier for cxl region cxl/region: Add sysfs attribute for locality attributes of CXL regions cxl/region: Calculate performance data for a region cxl: Set cxlmd->endpoint before adding port device cxl: Move QoS class to be calculated from the nearest CPU cxl: Split out host bridge access coordinates cxl: Split out combine_coordinates() for common shared usage ACPI: HMAT / cxl: Add retrieval of generic port coordinates for both access classes ACPI: HMAT: Introduce 2 levels of generic port access class base/node / ACPI: Enumerate node access class for 'struct access_coordinate' ...
2024-03-16Merge tag 'v6.9-p1' of ↵Linus Torvalds11-3/+133
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Avoid unnecessary copying in scomp for trivial SG lists Algorithms: - Optimise NEON CCM implementation on ARM64 Drivers: - Add queue stop/query debugfs support in hisilicon/qm - Intel qat updates and cleanups" * tag 'v6.9-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (79 commits) Revert "crypto: remove CONFIG_CRYPTO_STATS" crypto: scomp - remove memcpy if sg_nents is 1 and pages are lowmem crypto: tcrypt - add ffdhe2048(dh) test crypto: iaa - fix the missing CRYPTO_ALG_ASYNC in cra_flags crypto: hisilicon/zip - fix the missing CRYPTO_ALG_ASYNC in cra_flags hwrng: hisi - use dev_err_probe MAINTAINERS: Remove T Ambarus from few mchp entries crypto: iaa - Fix comp/decomp delay statistics crypto: iaa - Fix async_disable descriptor leak dt-bindings: rng: atmel,at91-trng: add sam9x7 TRNG dt-bindings: crypto: add sam9x7 in Atmel TDES dt-bindings: crypto: add sam9x7 in Atmel SHA dt-bindings: crypto: add sam9x7 in Atmel AES crypto: remove CONFIG_CRYPTO_STATS crypto: dh - Make public key test FIPS-only crypto: rockchip - fix to check return value crypto: jitter - fix CRYPTO_JITTERENTROPY help text crypto: qat - make ring to service map common for QAT GEN4 crypto: qat - fix ring to service map for dcc in 420xx crypto: qat - fix ring to service map for dcc in 4xxx ...
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-26 13:07:14 +0300