summaryrefslogtreecommitdiff
path: root/Documentation/media
AgeCommit message (Collapse)AuthorFilesLines
2020-03-30Merge tag 'media/v5.7-1' of ↵Linus Torvalds29-271/+433
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - New sensor driver: imx219 - Support for some new pixelformats - Support for Sun8i SoC - Added more codecs to meson vdec driver - Prepare for removing the legacy usbvision driver by moving it to staging. This driver has issues and use legacy core APIs. If nobody steps up to address those, it is time for its retirement. - Several cleanups and improvements on drivers, with the addition of new supported boards * tag 'media/v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (236 commits) media: venus: firmware: Ignore secure call error on first resume media: mtk-vpu: load vpu firmware from the new location media: i2c: video-i2c: fix build errors due to 'imply hwmon' media: MAINTAINERS: add myself to co-maintain Hantro G1/G2 for i.MX8MQ media: hantro: add initial i.MX8MQ support media: dt-bindings: Document i.MX8MQ VPU bindings media: vivid: fix incorrect PA assignment to HDMI outputs media: hantro: Add linux-rockchip mailing list to MAINTAINERS media: cedrus: h264: Fix 4K decoding on H6 media: siano: Use scnprintf() for avoiding potential buffer overflow media: rc: Use scnprintf() for avoiding potential buffer overflow media: allegro: create new struct for channel parameters media: allegro: move mail definitions to separate file media: allegro: pass buffers through firmware media: allegro: verify source and destination buffer in VCU response media: allegro: handle dependency of bitrate and bitrate_peak media: allegro: read bitrate mode directly from control media: allegro: make QP configurable media: allegro: make frame rate configurable media: allegro: skip filler data if possible ...
2020-03-21docs: prevent warnings due to autosectionlabelMauro Carvalho Chehab1-4/+4
Changeset 58ad30cf91f0 ("docs: fix reference to core-api/namespaces.rst") enabled a new feature at Sphinx: it will now generate index for each document title, plus to each chapter inside it. There's a drawback, though: one document cannot have two sections with the same name anymore. A followup patch will change the logic of autosectionlabel to avoid most creating references for every single section title, but still we need to be able to reference the chapters inside a document. There are a few places where there are two chapters with the same name. This patch renames one of the chapters, in order to avoid symbol conflict within the same document. PS.: as I don't speach Chinese, I had some help from a friend (Wen Liu) at the Chinese translation for "publishing patches" for this document: Documentation/translations/zh_CN/process/5.Posting.rst Fixes: 58ad30cf91f0 ("docs: fix reference to core-api/namespaces.rst") Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/2bffb91e4a63d41bf5fae1c23e1e8b3bba0b8806.1584716446.git.mchehab+huawei@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-03-20media: v4l: Add 1X14 14-bit greyscale media bus code definitionDaniel Glöckner1-0/+37
The code is called MEDIA_BUS_FMT_Y14_1X14 and behaves just like MEDIA_BUS_FMT_Y12_1X12 with two more bits. Signed-off-by: Daniel Glöckner <dg@emlix.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-20media: v4l: Add 14-bit raw greyscale pixel formatDaniel Glöckner2-0/+73
The new format is called V4L2_PIX_FMT_Y14. Like V4L2_PIX_FMT_Y10 and V4L2_PIX_FMT_Y12 it is stored in two bytes per pixel but has only two unused bits at the top. Signed-off-by: Daniel Glöckner <dg@emlix.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-20media: v4l: Add 14-bit raw bayer pixel formatsSakari Ailus2-0/+83
The formats added by this patch are: V4L2_PIX_FMT_SBGGR14 V4L2_PIX_FMT_SGBRG14 V4L2_PIX_FMT_SGRBG14 V4L2_PIX_FMT_SRGGB14 Signed-off-by: Jouni Ukkonen <jouni.ukkonen@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> [dg@emlix.com: rebased onto current media_tree] Signed-off-by: Daniel Glöckner <dg@emlix.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-02media: Documentation:media:v4l-drivers: Update vivid documentation.Vandana BN1-3/+60
Add metadata capture/output and v4l-touch support in vivid documentation. Signed-off-by: Vandana BN <bnvandana@gmail.com> [hverkuil-cisco@xs4all.nl: fixed some typos, made some small tweaks of the text] Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-02media: Split v4l2_pipeline_pm_use into v4l2_pipeline_pm_{get, put}Ezequiel Garcia1-1/+1
Currently, v4l2_pipeline_pm_use() prototype is: int v4l2_pipeline_pm_use(struct media_entity *entity, int use) Where the 'use' argument shall only be set to '1' for enable/power-on, or to '0' for disable/power-off. The integer return is specified as only meaningful when 'use' is set to '1'. Let's enforce this semantic by splitting the function in two: v4l2_pipeline_pm_get and v4l2_pipeline_pm_put. This is done for several reasons. It makes the API easier to use (or harder to misuse). It removes the constraint on the values the 'use' argument shall take. Also, it removes the need to constraint the return value, by making v4l2_pipeline_pm_put void return. And last, it's more consistent with other kernel APIs, such as the runtime pm APIs, which makes the code more symmetric. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-02media: uapi: h264: Add DPB entry field reference flagsJonas Karlman1-0/+16
Using the field information attached to v4l2 buffers is not enough to determine the type of field referenced by a DPB entry: the decoded frame might contain the full picture (both top and bottom fields) but the reference only point to one of them. Let's add new V4L2_H264_DPB_ENTRY_FLAG_ flags to express that. [Keep only 2 flags and add some details about they mean] Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-02-27media: ipu3.rst: add imgu pipe config tool linkBingbu Cao1-4/+7
A specific tool which can be used to generate imgu intermedia resolutions now is public on github, this patch adds this information into ipu3.rst. Signed-off-by: Bingbu Cao <bingbu.cao@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2020-02-24media: Documentation/media/uapi: more readable unionsHans Verkuil19-260/+153
Avoid adding an extra columns when describing unions in the documentation. That makes it much harder to read. See e.g. VIDIOC_QUERY_EXT_CTRLS. Instead start off a union with 'union {' and end it with an extra row containing '}'. This leaves a lot more space for the description of the fields. This formatting technique was used in a few places already, but this patches fixes all remaining occurrences of 'union' in the media uAPI. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reported-by: Nicolas Dufresne <nicolas@ndufresne.ca> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-02-24media: rename VFL_TYPE_GRABBER to _VIDEOHans Verkuil1-2/+2
We currently have the following devnode types: enum vfl_devnode_type { VFL_TYPE_GRABBER = 0, VFL_TYPE_VBI, VFL_TYPE_RADIO, VFL_TYPE_SUBDEV, VFL_TYPE_SDR, VFL_TYPE_TOUCH, VFL_TYPE_MAX /* Shall be the last one */ }; They all make sense, except for the first: GRABBER really refers to /dev/videoX devices, which can be capture, output or m2m, so 'grabber' doesn't even refer to their function anymore. Let's call a spade a spade and rename this to VFL_TYPE_VIDEO. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-02-24media: vidioc-queryctrl.rst: fix error codeHans Verkuil1-1/+1
An attempt to get a BUTTON control returns EACCES, not EINVAL. BUTTON controls have V4L2_CTRL_FLAG_WRITE_ONLY set, and the documentation for that flag correctly says that getting a write-only control returns EACCES. It's the description of the BUTTON type that's wrong, so fix that so they are consistent. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-02-01Merge tag 'media/v5.6-1' of ↵Linus Torvalds13-91/+52
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - New staging driver for Rockship ISPv1 unit - New staging driver for Rockchip MIPI Synopsys DPHY RX0 - y2038 fixes at V4L2 API (backward-compatible) - A dvb core fix when receiving invalid EIT sections - Some clang-specific warnings got fixed - Added support for touch V4L2 interface at vivid - Several drivers were converted to use the new i2c_new_scanned_device() kAPI - Added sm1 support at meson's vdec driver - Several other driver cleanups, fixes and improvements * tag 'media/v5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (207 commits) media: staging/intel-ipu3: remove TODO item about acronyms media: v4l2-fwnode: Print the node name while parsing endpoints media: Revert "media: staging/intel-ipu3: make imgu use fixed running mode" media: mt9v111: constify copied structure media: platform: VIDEO_MEDIATEK_JPEG can also depend on MTK_IOMMU media: uvcvideo: Add a quirk to force GEO GC6500 Camera bits-per-pixel value media: uvcvideo: Avoid cyclic entity chains due to malformed USB descriptors media: hantro: fix post-processing NULL pointer dereference media: rcar-vin: Use correct pixel format when aligning format media: MAINTAINERS: add entry for Rockchip ISP1 driver media: staging: rkisp1: add TODO file for staging media: staging: rkisp1: add document for rkisp1 meta buffer format media: staging: rkisp1: add output device for parameters media: staging: rkisp1: add capture device for statistics media: staging: rkisp1: add user space ABI definitions media: staging: rkisp1: add streaming paths media: staging: rkisp1: add Rockchip ISP1 base driver media: staging: phy-rockchip-dphy-rx0: add Rockchip MIPI Synopsys DPHY RX0 driver media: staging: dt-bindings: add Rockchip MIPI RX D-PHY RX0 yaml bindings media: staging: dt-bindings: add Rockchip ISP1 yaml bindings ...
2020-01-23media: Revert "media: staging/intel-ipu3: make imgu use fixed running mode"Bingbu Cao1-3/+3
This reverts commit e878742c83ec26ef256ebb6b36a4d44644548f25. Imgu should still keep the capability and flexibility to allow user to run 2 video pipes, as the user may use the video pipe to capture still frames with less system load and power than still pipe. Suggested-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Bingbu Cao <bingbu.cao@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-01-12doc: fix typo of snapshot in documentationJacob Keller1-1/+1
A couple of locations accidentally misspelled snapshot as shapshot. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-08media: v4l2: Fix fourcc names for 12b and 14b packed bayerDaniel Gomez2-2/+2
Fix documentation fourcc names for the 12-bit and 14-bit packed Bayer formats. Signed-off-by: Daniel Gomez <daniel@qtec.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-01-08media: Revert "media: v4l2: Fix fourcc names for BAYER12P"Hans Verkuil1-1/+1
This reverts commit 2b016c47f48f3d144816645822a09995063313a1. Wrong patch was merged, revert this first before applying the right patch. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-01-08media: Documentation: media: dtv-frontend.rst: fix a few minor typosDaniel W. S. Almeida1-8/+8
Fix a few minor typos throughout the document without changing the meaning of the sentences. Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-01-04media: staging/intel-ipu3: make imgu use fixed running modeBingbu Cao1-3/+3
Currently, the imgu running mode need user to set by v4l2 ctrl. However, imgu only support 2 pipes and 2 operation modes - video and still. This patch make the first imgu subdev running as video and second one running as still, it will make the user understand easily, it can also cover current camera use cases requirement. The running mode is set during subdev registering, no race-condition after change, so it is safe to change the mode data type to integer. Signed-off-by: Bingbu Cao <bingbu.cao@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-01-03media: documentation: fix video_event descriptionArnd Bergmann2-2/+2
The type for the timestamp in video_event was changed to 'long' a long time ago, change the documentation to match. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2019-12-16media: vidioc-enum-fmt.rst: clarify format preferenceEzequiel Garcia1-1/+3
It has been decided to use the ENUM_FMT index value as a hint for driver preference. This is defined purposedly in a very liberal way, letting drivers define what "preference" means. For instance, the Hantro VPU driver indicates additional processing to output a given format, and thus implicates more CPU usage, which is enumerated after native (non-processed) formats. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2019-12-16media: pixfmt-tch-td16/tu16.rst: document that this is little endianHans Verkuil2-34/+34
Testing with the rmi_f54 driver on the Lenovo X1 Carbon 6th gen laptop showed that the data is in little endian format. Update the documentation accordingly. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2019-12-13media: cec-ioc-g-mode.rst: remove trailing 'i'Hans Verkuil1-1/+1
Remove spurious trailing 'i'. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2019-12-13media: ivtv/cx18: remove ivtvdriver.org referencesHans Verkuil3-42/+1
That URL is no longer valid, so either remove references to it or replace it with linuxtv.org. Rather than updating the URL I've just dropped the cx18.rst driver documentation since it was really out of date. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: awalls@md.metrocast.net Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2019-12-13media: v4l2: Fix fourcc names for BAYER12PDaniel Gomez1-1/+1
Fix documentation fourcc names for the 12-bit packed Bayer formats. Signed-off-by: Daniel Gomez <daniel@qtec.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2019-12-13media: vidioc-g-dv-timings.rst: fix wrong porchHans Verkuil1-1/+1
It is the vfrontporch of field 1 that is one half-line longer, not the backporch. The order of the vertical signals in an interlaced system is: Field 1: vsync vbackporch active video of field 1 vfrontporch + 0.5 Field 2: il_vsync il_vbackporch - 0.5 active video of field 2 il_vfrontporch Interlaced systems that use HALF_LINE set the il_ fields as follows: il_vfrontporch = vfrontporch il_vsync = vsync il_vbackporch = vbackporch + 1 So the total vertical blanking for field 1 is: vsync + vbackporch + vfrontporch + 0.5 and for field 2: vsync + vbackporch + 1 + vfrontporch - 0.5 == vsync + vbackporch + vfrontporch + 0.5 So each field has the same number of half-lines. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2019-11-10media: Documentation: media: *_DEFAULT targets for subdevsRicardo Ribalda Delgado1-1/+3
Some sensors have optical blanking areas, this is, pixels that are painted and do not account for light, only noise. These special pixels are very useful for calibrating the sensor, but should not be displayed on a DEFAULT target. Signed-off-by: Ricardo Ribalda Delgado <ribalda@kernel.org> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2019-11-09media: uapi: h264: clarify expected scaling_list_4x4/8x8 orderJonas Karlman1-2/+6
Clarify that the expected order of scaling lists should follow the order they are listed in the H264 standard. The expected scaling list order, for 4x4: Intra Y, Intra Cb, Intra Cr, Inter Y, Inter Cb, Inter Cr, for 8x8: Intra Y, Inter Y, Intra Cb, Inter Cb, Intra Cr, Inter Cr. Also clarify that the values in a scaling list should be in matrix order, the same value order that vaapi, vdpau and nvdec use. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2019-11-08media: Documentation: v42l_core: v4l2_ext_controlRicardo Ribalda Delgado1-0/+5
Describe p_area field from v4l2_ext_ctrl Signed-off-by: Ricardo Ribalda Delgado <ribalda@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2019-11-05media: doc-rst: add more info for resolution change blocks in ipu3Bingbu Cao2-8/+376
This patch add more details for the resolution change blocks It can help the developer to understand the main resolution change blocks in ImgU. [sakari.ailus@linux.intel.com: Add new files to MAINTAINERS] Signed-off-by: Bingbu Cao <bingbu.cao@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2019-10-25media: vimc: Implement debayer control for mean window sizeArthur Moraes do Lago1-9/+1
Add mean window size parameter for debayer filter as a control in vimc-debayer. vimc-debayer was patched to allow changing mean window parameter of the filter without needing to reload the driver. The parameter can now be set using a v4l2-ctl control(mean_window_size). Co-developed-by: Laís Pessine do Carmo <laispc19@gmail.com> Signed-off-by: Laís Pessine do Carmo <laispc19@gmail.com> Signed-off-by: Arthur Moraes do Lago <arthurmoraeslago@gmail.com> Acked-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-25media: Documentation: v4l: fix section depthAlexandre Courbot1-2/+2
The request API documentation introduced a new section which should have been a subsection. Fix this. Signed-off-by: Alexandre Courbot <acourbot@chromium.org> Signed-off-by: Alexandre Courbot <gnurou@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-25media: imx.rst: Pass the v4l2-ctl configurationFabio Estevam1-3/+4
Pass the v4l2-ctl configuration for the imx6q-sabreauto PAL example for completeness and consistency. Suggested-by: Steve Longerbeam <slongerbeam@gmail.com> Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Steve Longerbeam <slongerbeam@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-25media: imx.rst: Provide instructions for the i.MX6DL sabreautoFabio Estevam1-0/+58
The i.MX6DL sabreauto has different numbering on the I2C bus and I2C muxes compared to the i.MX6Q as shown in the kernel log below: [ 5.159423] imx-media: ipu1_csi0_mux:5 -> ipu1_csi0:0 [ 5.164618] imx-media: ipu1_csi1_mux:5 -> ipu1_csi1:0 [ 5.169953] imx-media: adv7180 4-0021:0 -> ipu1_csi0_mux:4 To avoid confusion, add an entry that shows how to setup the links and configure the pads that are specific to the i.MX6DL sabreauto. Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Steve Longerbeam <slongerbeam@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-25media: imx.rst: Provide a real example for the output formatFabio Estevam1-3/+1
In the i.MX6Q sabreauto pipeline example, it is better to provide a real example for the output format, so do it just like in the previous lines for consistency. Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Steve Longerbeam <slongerbeam@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-25media: imx.rst: Specify the sabreauto variantFabio Estevam1-3/+3
Improve the documentation by specifying that the instructions are related to the i.MX6Q sabreauto variant. This avoids confusion if someone follows these steps on a i.MX6DL sabreauto, which has different numbering on the I2C bus and I2C muxes. Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Steve Longerbeam <slongerbeam@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-25media: pixfmt: Document the HEVC slice pixel formatPaul Kocialkowski1-0/+23
Document the current state of the HEVC slice pixel format. The format will need to evolve in the future, which is why it is not part of the public API. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-25media: v4l: Add definitions for HEVC stateless decodingPaul Kocialkowski4-3/+580
This introduces the required definitions for HEVC decoding support with stateless VPUs. The controls associated to the HEVC slice format provide the required meta-data for decoding slices extracted from the bitstream. They are not exported to the public V4L2 API since reworking this API will likely be needed for covering various use-cases and new hardware. Multi-slice decoding is exposed as a valid decoding mode to match current H.264 support but it is not yet implemented. The interface comes with the following limitations: * No custom quantization matrices (scaling lists); * Support for a single temporal layer only; * No slice entry point offsets support; * No conformance window support; * No VUI parameters support; * No support for SPS extensions: range, multilayer, 3d, scc, 4 bits; * No support for PPS extensions: range, multilayer, 3d, scc, 4 bits. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> [hverkuil-cisco@xs4all.nl: use 1ULL in flags defines in hevc-ctrls.h] Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: Documentation:media:v4l2:Add vivid metadata docVandana BN2-0/+61
Adds new file for describing new metadata format V4L2_META_FMT_VIVID added in vivid driver. Signed-off-by: Vandana BN <bnvandana@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-21media: docs-rst: Document m2m stateless video decoder interfaceAlexandre Courbot2-0/+425
Documents the protocol that user-space should follow when communicating with stateless video decoders. The stateless video decoding API makes use of the new request and tags APIs. While it has been implemented with the Cedrus driver so far, it should probably still be considered staging for a short while. Signed-off-by: Alexandre Courbot <acourbot@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-21media: videodev2.h: add V4L2_DEC_CMD_FLUSHHans Verkuil2-1/+10
Add this new V4L2_DEC_CMD_FLUSH decoder command and document it. Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Alexandre Courbot <acourbot@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-21media: vb2: add V4L2_BUF_FLAG_M2M_HOLD_CAPTURE_BUFHans Verkuil2-0/+19
This patch adds support for the V4L2_BUF_FLAG_M2M_HOLD_CAPTURE_BUF flag. It also adds a new V4L2_BUF_CAP_SUPPORTS_M2M_HOLD_CAPTURE_BUF capability. Drivers should set vb2_queue->subsystem_flags to VB2_V4L2_FL_SUPPORTS_M2M_HOLD_CAPTURE_BUF to indicate support for this flag. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-10media: Documentation: media: Describe V4L2_CID_UNIT_CELL_SIZERicardo Ribalda Delgado1-0/+10
New control to pass to userspace the width/height of a pixel. Which is needed for calibration and lens selection. Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Ricardo Ribalda Delgado <ribalda@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-10media: Documentation: media: Document V4L2_CTRL_TYPE_AREARicardo Ribalda Delgado2-0/+7
A struct v4l2_area containing the width and the height of a rectangular area. Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Ricardo Ribalda Delgado <ribalda@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-10media: Documentation: v4l2_ctrl_new_std_compoundRicardo Ribalda Delgado1-0/+9
Function for initializing compound controls with a default value. Suggested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Ricardo Ribalda Delgado <ribalda@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-01media: cec: document CEC_ADAP_G_CONNECTOR_INFO and capabilityDariusz Marcinkiewicz4-1/+119
Document the new CEC_ADAP_G_CONNECTOR_INFO ioctl and the new CEC_CAP_CONNECTOR_INFO capability. Co-developed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Dariusz Marcinkiewicz <darekm@google.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> [hverkuil-cisco@xs4all.nl: added CEC_CAP_CONNECTOR_INFO] [hverkuil-cisco@xs4all.nl: added DQEVENT have_conn_info] Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-01media: uapi/linux/cec.h: add defines for the CEC UI Command OperandHans Verkuil1-0/+89
These defines were never added to this CEC header, likely due to laziness on the part of the original author, i.e. me. But it is useful to have them, so add them. Also update the cec.h.rst.exceptions file to avoid errors when building the documentation. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-01media: uapi: h264: clarify num_ref_idx_l[01]_(default_)active fieldsPhilipp Zabel1-2/+4
Since the uapi does not contain the num_ref_idx_active_override_flag, drivers for decoders that do not parse slices themselves don't know how to choose between the num_ref_idx_l[01]_default_active and the num_ref_idx_l[01]_active override fields. Instead, userspace must set the override fields to the default values if the slice does not have the num_ref_idx_active_override flag set. The drivers will then always enable the override internally and ignore the default fields completely. Clarify this requirement in the API documentation. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-01media: uapi: h264: clarify V4L2_PIX_FMT_H264_SLICE formatPhilipp Zabel1-4/+8
Document that the slice headers must be included for the benefit of decoders that parse them (partially) in hardware, and that the start code is optional. Add a link to the ITU-T Rec. H.264 specification section that describes the slice format. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-01media: vidioc-g-fbuf.rst: remove duplicate 'struct'Hans Verkuil1-1/+1
"struct struct" -> "struct" Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-21 15:24:58 +0300