summaryrefslogtreecommitdiff
path: root/Documentation/hwmon/lm70
AgeCommit message (Collapse)AuthorFilesLines
2017-01-21hwmon: (lm70) Add support for TI TMP122/124Florian Fainelli1-2/+6
Add support for Texas Instruments TMP122/124 which are nearly identical to their TMP121/123 except that they also support programmable temperature thresholds. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-01-29Update Jean Delvare's e-mail addressJean Delvare1-1/+1
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-09-24hwmon: (lm70) Add support for LM71 and LM74Christophe Leroy1-2/+9
Add support for LM74 and LM71 to LM70 driver. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-09-24hwmon: (lm70) Allow 4wire SPI bus with LM70Christophe Leroy1-3/+2
Removing the 3wire limitation on LM70 as the component also allows operation on 4wire SPI bus Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2009-01-07hwmon: (lm70) Add TI TMP121 supportManuel Lauss1-1/+7
The Texas Instruments TMP121 is a SPI temperature sensor very similar to the LM70, with slightly higher resolution. This patch extends the LM70 driver to support the TMP121. The TMP123 differs in pin assign- ment. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-01-07hwmon: (lm70) Code streamlining and cleanupKaiwan N Billimoria1-0/+4
This fixes a byteswap bug in the LM70 temperature sensor driver, which was previously covered up by a converse bug in the driver for the LM70EVAL-LLP board (which is also fixed). Other fixes: doc updates, remove an annoying msleep(), and improve three-wire protocol handling. Signed-off-by: Kaiwan N Billimoria <kaiwan@designergraphix.com> [ dbrownell@users.sourceforge.net: doc and whitespace tweaks ] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2006-06-22[PATCH] lm70: New hardware monitoring driverKaiwan N Billimoria1-0/+31
This driver implements support for the National Semiconductor LM70 temperature sensor. The LM70 temperature sensor chip supports a single temperature sensor. It communicates with a host processor (or microcontroller) via an SPI/Microwire Bus interface. Communication with the LM70 is simple: when the temperature is to be sensed, the driver accesses the LM70 using SPI communication: 16 SCLK cycles comprise the MOSI/MISO loop. At the end of the transfer, the 11-bit 2's complement digital temperature (sent via the SIO line), is available in the driver for interpretation. This driver makes use of the kernel's in-core SPI support. Signed-off-by: Kaiwan N Billimoria <kaiwan@designergraphix.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-28 19:46:55 +0300