| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The first DMAC instance in the StarFive JH7100 SoC supports 16 DMA
channels.
FIXME Given there are more changes to the driver than just increasing
DMAC_MAX_CHANNELS, we probably need a new compatible value, too.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
Add bindings for the temperature sensor on the StarFive JH7100 SoC.
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Reviewed-by: Rob Herring <robh@kernel.org>
|
|
Current u-boot doesn't seem to take into account that some GPIOs are
configured as inputs/outputs of certain peripherals on power-up. This
means it ends up configuring some GPIOs as inputs to more than one
peripheral which the documentation explicitly says is illegal. Similarly
it also ends up configuring more than one GPIO as output of the same
peripheral. While not explicitly mentioned by the documentation this
also seems like a bad idea.
The easiest way to remedy this mess is to just disconnect all GPIOs from
peripherals and have our pinmux configuration set everything up
properly. This, however, means that we'd disconnect the serial console
from its pins for a while, so add a device tree property to keep
certain GPIOs from being reset.
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
|
|
Add bindings for the audio reset controller on the StarFive JH7100
RISC-V SoC.
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
|
|
Add bindings for the audio clocks on the StarFive JH7100 RISC-V SoC.
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
|
|
commit d0b65b1500973fef840dbc4bb9f9c237db2b761f upstream.
Add compatibles for the StarFive JH7100 uarts.
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
|
|
commit 7431b391df95f5b8d08fd0f9fa1a75cc038ee290 upstream.
Add bindings for the GPIO/pin controller on the JH7100 RISC-V SoC by
StarFive Ltd. This is a test chip for their upcoming JH7110 SoC.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
|
|
commit d7d456a5201d2e707318bbdc4fb69a3407eed29e upstream.
Add bindings for the reset controller on the JH7100 RISC-V SoC by
StarFive Ltd. This is a test chip for their upcoming JH7110 SoC.
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
|
|
commit af35098f4fcd1f9bfc58dc37479e0786a4d85e96 upstream.
Add bindings for the clock generator on the JH7100 RISC-V SoC by
StarFive Ltd. This is a test chip for their upcoming JH7110 SoC.
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
|
|
commit 9ac16169b4d4359d3832669bf06aab9e51184828 upstream.
Add compatible string for StarFive JH7100 plic.
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
|
|
commit 3234d3a1374308615c0cde5e83e52f6b644eaf53 upstream.
Add compatible string for the StarFive JH7100 clint.
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
|
|
[ Upstream commit b54472a02cefd0dc468158bbc4d636b27cd6fc34 ]
The if/then schema for 'data-lanes' doesn't work as 'compatible' is at a
different level than 'data-lanes'. To make it work, the if/then schema
would have to be moved to the top level and then whole hierarchy of
nodes down to 'data-lanes' created. I don't think it is worth the
complexity to do that, so let's just drop it.
The error in this schema is masked by a fixup in the tools causing the
'allOf' to get overwritten. Removing the fixup as part of moving to
json-schema draft 2019-09 revealed the issue:
Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.example.dt.yaml: mipi-csi@30750000: ports:port@0:endpoint:data-lanes:0: [1] is too short
From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.example.dt.yaml: mipi-csi@32e30000: ports:port@0:endpoint:data-lanes:0: [1, 2, 3, 4] is too long
From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
The if condition was always true because 'compatible' did not exist in
'endpoint' node and a non-existent property is true for json-schema.
Fixes: 85b62ff2cb97 ("media: dt-bindings: media: nxp,imx7-mipi-csi2: Add i.MX8MM support")
Cc: Rui Miguel Silva <rmfrfs@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: linux-media@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Link: https://lore.kernel.org/r/20211203164828.187642-1-robh@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 96db48c9d777a73a33b1d516c5cfed7a417a5f40 upstream.
This binding was already documented in phy.txt, commit 252ae5330daa
("Documentation: devicetree: Add PHY no lane swap binding"), but got
accidently removed during YAML conversion in commit d8704342c109
("dt-bindings: net: Add a YAML schemas for the generic PHY options").
Note: 'enet-phy-lane-no-swap' and the absence of 'enet-phy-lane-swap' are
not identical, as the former one disable this feature, while the latter
one doesn't change anything.
Fixes: d8704342c109 ("dt-bindings: net: Add a YAML schemas for the generic PHY options")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20211130082756.713919-1-alexander.stein@ew.tq-group.com
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8fc4f038fa832ec3543907fdcbe1334e1b0a8950 upstream.
A correct value for output-range-microvolts is -5 to 5 Volts
not -5 to 5 milivolts
Fixes: e904cc899293f ("dt-bindings: iio: dac: AD5766 yaml documentation")
Signed-off-by: Mihail Chindris <mihail.chindris@analog.com>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Link: https://lore.kernel.org/r/20211007080035.2531-6-mihail.chindris@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
s5m8767,pmic-buck-default-dvs-idx property
commit a7fda04bc9b6ad9da8e19c9e6e3b1dab773d068a upstream.
The driver was always parsing "s5m8767,pmic-buck-default-dvs-idx", not
"s5m8767,pmic-buck234-default-dvs-idx".
Cc: <stable@vger.kernel.org>
Fixes: 26aec009f6b6 ("regulator: add device tree support for s5m8767")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Rob Herring <robh@kernel.org>
Message-Id: <20211008113723.134648-3-krzysztof.kozlowski@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
disabled
commit b16bef60a9112b1e6daf3afd16484eb06e7ce792 upstream.
The driver and its bindings, before commit 04f9f068a619 ("regulator:
s5m8767: Modify parsing method of the voltage table of buck2/3/4") were
requiring to provide at least one safe/default voltage for DVS registers
if DVS GPIO is not being enabled.
IOW, if s5m8767,pmic-buck2-uses-gpio-dvs is missing, the
s5m8767,pmic-buck2-dvs-voltage should still be present and contain one
voltage.
This requirement was coming from driver behavior matching this condition
(none of DVS GPIO is enabled): it was always initializing the DVS
selector pins to 0 and keeping the DVS enable setting at reset value
(enabled). Therefore if none of DVS GPIO is enabled in devicetree,
driver was configuring the first DVS voltage for buck[234].
Mentioned commit 04f9f068a619 ("regulator: s5m8767: Modify parsing
method of the voltage table of buck2/3/4") broke it because DVS voltage
won't be parsed from devicetree if DVS GPIO is not enabled. After the
change, driver will configure bucks to use the register reset value as
voltage which might have unpleasant effects.
Fix this by relaxing the bindings constrain: if DVS GPIO is not enabled
in devicetree (therefore DVS voltage is also not parsed), explicitly
disable it.
Cc: <stable@vger.kernel.org>
Fixes: 04f9f068a619 ("regulator: s5m8767: Modify parsing method of the voltage table of buck2/3/4")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Rob Herring <robh@kernel.org>
Message-Id: <20211008113723.134648-2-krzysztof.kozlowski@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Some late pin control fixes, the most generally annoying will probably
be the AMD IRQ storm fix affecting the Microsoft surface.
Summary:
- Three fixes pertaining to Broadcom DT bindings. Some stuff didn't
work out as inteded, we need to back out
- A resume bug fix in the STM32 driver
- Disable and mask the interrupts on probe in the AMD pinctrl driver,
affecting Microsoft surface"
* tag 'pinctrl-v5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: amd: disable and mask interrupts on probe
pinctrl: stm32: use valid pin identifier in stm32_pinctrl_resume()
Revert "pinctrl: bcm: ns: support updated DT binding as syscon subnode"
dt-bindings: pinctrl: brcm,ns-pinmux: drop unneeded CRU from example
Revert "dt-bindings: pinctrl: bcm4708-pinmux: rework binding to use syscon"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few small fixes.
Mostly driver specific but there's one in the core which fixes a
deadlock when adding devices on spi-mux that's triggered because
spi-mux is a SPI device which is itself a SPI controller and so can
instantiate devices when registered.
We were using a global lock to protect against reusing chip selects
but they're a per controller thing so moving the lock per controller
resolves that"
* tag 'spi-fix-v5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi-mux: Fix false-positive lockdep splats
spi: Fix deadlock when adding SPI controllers on SPI buses
spi: bcm-qspi: clear MSPI spifie interrupt during probe
spi: spi-nxp-fspi: don't depend on a specific node name erratum workaround
spi: mediatek: skip delays if they are 0
spi: atmel: Fix PDC transfer setup bug
spi: spidev: Add SPI ID table
spi: Use 'flash' node name instead of 'spi-flash' in example
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Quite calm.
The noisy DSA driver (embedded switches) changes, and adjustment to
IPv6 IOAM behavior add to diffstat's bottom line but are not scary.
Current release - regressions:
- af_unix: rename UNIX-DGRAM to UNIX to maintain backwards
compatibility
- procfs: revert "add seq_puts() statement for dev_mcast", minor
format change broke user space
Current release - new code bugs:
- dsa: fix bridge_num not getting cleared after ports leaving the
bridge, resource leak
- dsa: tag_dsa: send packets with TX fwd offload from VLAN-unaware
bridges using VID 0, prevent packet drops if pvid is removed
- dsa: mv88e6xxx: keep the pvid at 0 when VLAN-unaware, prevent HW
getting confused about station to VLAN mapping
Previous releases - regressions:
- virtio-net: fix for skb_over_panic inside big mode
- phy: do not shutdown PHYs in READY state
- dsa: mv88e6xxx: don't use PHY_DETECT on internal PHY's, fix link
LED staying lit after ifdown
- mptcp: fix possible infinite wait on recvmsg(MSG_WAITALL)
- mqprio: Correct stats in mqprio_dump_class_stats()
- ice: fix deadlock for Tx timestamp tracking flush
- stmmac: fix feature detection on old hardware
Previous releases - always broken:
- sctp: account stream padding length for reconf chunk
- icmp: fix icmp_ext_echo_iio parsing in icmp_build_probe()
- isdn: cpai: check ctr->cnr to avoid array index out of bound
- isdn: mISDN: fix sleeping function called from invalid context
- nfc: nci: fix potential UAF of rf_conn_info object
- dsa: microchip: prevent ksz_mib_read_work from kicking back in
after it's canceled in .remove and crashing
- dsa: mv88e6xxx: isolate the ATU databases of standalone and bridged
ports
- dsa: sja1105, ocelot: break circular dependency between switch and
tag drivers
- dsa: felix: improve timestamping in presence of packe loss
- mlxsw: thermal: fix out-of-bounds memory accesses
Misc:
- ipv6: ioam: move the check for undefined bits to improve
interoperability"
* tag 'net-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (60 commits)
icmp: fix icmp_ext_echo_iio parsing in icmp_build_probe
MAINTAINERS: Update the devicetree documentation path of imx fec driver
sctp: account stream padding length for reconf chunk
mlxsw: thermal: Fix out-of-bounds memory accesses
ethernet: s2io: fix setting mac address during resume
NFC: digital: fix possible memory leak in digital_in_send_sdd_req()
NFC: digital: fix possible memory leak in digital_tg_listen_mdaa()
nfc: fix error handling of nfc_proto_register()
Revert "net: procfs: add seq_puts() statement for dev_mcast"
net: encx24j600: check error in devm_regmap_init_encx24j600
net: korina: select CRC32
net: arc: select CRC32
net: dsa: felix: break at first CPU port during init and teardown
net: dsa: tag_ocelot_8021q: fix inability to inject STP BPDUs into BLOCKING ports
net: dsa: felix: purge skb from TX timestamping queue if it cannot be sent
net: dsa: tag_ocelot_8021q: break circular dependency with ocelot switch lib
net: dsa: tag_ocelot: break circular dependency with ocelot switch lib driver
net: mscc: ocelot: cross-check the sequence id from the timestamp FIFO with the skb PTP header
net: mscc: ocelot: deny TX timestamping of non-PTP packets
net: mscc: ocelot: warn when a PTP IRQ is raised for an unknown skb
...
|
|
There is no need to include CRU in example of this binding. It wasn't
complete / correct anyway. The proper binding can be find in the
mfd/brcm,cru.yaml .
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211008205938.29925-2-zajec5@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
This reverts commit 2ae80900f239484069569380e1fc4340fd6e0089.
My rework was unneeded & wrong. It replaced a clear & correct "reg"
property usage with a custom "offset" one.
Back then I didn't understand how to properly handle CRU block binding.
I heard / read about syscon and tried to use it in a totally invalid
way. That change also missed Rob's review (obviously).
Northstar's pin controller is a simple consistent hardware block that
can be cleanly mapped using a 0x24 long reg space.
Since the rework commit there wasn't any follow up modifying in-kernel
DTS files to use the new binding. Broadcom also isn't known to use that
bugged binding. There is close to zero chance this revert may actually
cause problems / regressions.
This commit is a simple revert. Example binding may (should) be updated
/ cleaned up but that can be handled separately.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211008205938.29925-1-zajec5@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Pull drm fixes from Dave Airlie:
"I've returned from my tropical island retreat, even managed to bring
one of my kids on a dive with some turtles. Thanks to Daniel for doing
last week's work.
Otherwise this is the weekly fixes pull, it's a bit bigger because the
vc4 reverts in your tree caused some problems with fixes in the
drm-misc tree so it got left out last week, so this week has the misc
fixes rebased without the vc4 pieces.
Otherwise it's i915, amdgpu with the usual fixes and a scattering over
other drivers.
I expect things should calm down a bit more next week.
core:
- Kconfig fix for fb_simple vs simpledrm.
i915:
- Fix RKL HDMI audio
- Fix runtime pm imbalance on i915_gem_shrink() error path
- Fix Type-C port access before hw/sw state sync
- Fix VBT backlight struct version/size check
- Fix VT-d async flip on SKL/BXT with plane stretch workaround
amdgpu:
- DCN 3.1 DP alt mode fixes
- S0ix gfxoff fix
- Fix DRM_AMD_DC_SI dependencies
- PCIe DPC handling fix
- DCN 3.1 scaling fix
- Documentation fix
amdkfd:
- Fix potential memory leak
- IOMMUv2 init fixes
vc4 (there were some hdmi fixes but things got reverted, sort it out
later):
- compiler fix
nouveau:
- Cursor fix
- Fix ttm buffer moves for ampere gpu's by adding minimal
acceleration support.
- memory leak fixes
rockchip:
- crtc/clk fixup
panel:
- ili9341 Fix DT bindings indent
- y030xx067a - yellow tint init seq fix
gbefb:
- Fix gbefb when built with COMPILE_TEST"
* tag 'drm-fixes-2021-10-08' of git://anongit.freedesktop.org/drm/drm: (33 commits)
drm/amd/display: Fix detection of 4 lane for DPALT
drm/amd/display: Limit display scaling to up to 4k for DCN 3.1
drm/amd/display: Skip override for preferred link settings during link training
drm/nouveau/debugfs: fix file release memory leak
drm/nouveau/kms/nv50-: fix file release memory leak
drm/nouveau: avoid a use-after-free when BO init fails
DRM: delete DRM IRQ legacy midlayer docs
video: fbdev: gbefb: Only instantiate device when built for IP32
fbdev: simplefb: fix Kconfig dependencies
drm/panel: abt-y030xx067a: yellow tint fix
dt-bindings: panel: ili9341: correct indentation
drm/nouveau/fifo/ga102: initialise chid on return from channel creation
drm/rockchip: Update crtc fixup to account for fractional clk change
drm/nouveau/ga102-: support ttm buffer moves via copy engine
drm/nouveau/kms/tu102-: delay enabling cursor until after assign_windows
drm/sun4i: dw-hdmi: Fix HDMI PHY clock setup
drm/vc4: hdmi: Remove unused struct
drm/kmb: Enable alpha blended second plane
drm/amdgpu: handle the case of pci_channel_io_frozen only in amdgpu_pci_resume
drm/amdgpu: init iommu after amdkfd device init
...
|
|
dwmac 3.40a is an old ip version that can be found on SPEAr3xx soc.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from xfrm, bpf, netfilter, and wireless.
Current release - regressions:
- xfrm: fix XFRM_MSG_MAPPING ABI breakage caused by inserting a new
value in the middle of an enum
- unix: fix an issue in unix_shutdown causing the other end
read/write failures
- phy: mdio: fix memory leak
Current release - new code bugs:
- mlx5e: improve MQPRIO resiliency against bad configs
Previous releases - regressions:
- bpf: fix integer overflow leading to OOB access in map element
pre-allocation
- stmmac: dwmac-rk: fix ethernet on rk3399 based devices
- netfilter: conntrack: fix boot failure with
nf_conntrack.enable_hooks=1
- brcmfmac: revert using ISO3166 country code and 0 rev as fallback
- i40e: fix freeing of uninitialized misc IRQ vector
- iavf: fix double unlock of crit_lock
Previous releases - always broken:
- bpf, arm: fix register clobbering in div/mod implementation
- netfilter: nf_tables: correct issues in netlink rule change event
notifications
- dsa: tag_dsa: fix mask for trunked packets
- usb: r8152: don't resubmit rx immediately to avoid soft lockup on
device unplug
- i40e: fix endless loop under rtnl if FW fails to correctly respond
to capability query
- mlx5e: fix rx checksum offload coexistence with ipsec offload
- mlx5: force round second at 1PPS out start time and allow it only
in supported clock modes
- phy: pcs: xpcs: fix incorrect CL37 AN sequence, EEE disable
sequence
Misc:
- xfrm: slightly rejig the new policy uAPI to make it less cryptic"
* tag 'net-5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (66 commits)
net: prefer socket bound to interface when not in VRF
iavf: fix double unlock of crit_lock
i40e: Fix freeing of uninitialized misc IRQ vector
i40e: fix endless loop under rtnl
dt-bindings: net: dsa: marvell: fix compatible in example
ionic: move filter sync_needed bit set
gve: report 64bit tx_bytes counter from gve_handle_report_stats()
gve: fix gve_get_stats()
rtnetlink: fix if_nlmsg_stats_size() under estimation
gve: Properly handle errors in gve_assign_qpl
gve: Avoid freeing NULL pointer
gve: Correct available tx qpl check
unix: Fix an issue in unix_shutdown causing the other end read/write failures
net: stmmac: trigger PCS EEE to turn off on link down
net: pcs: xpcs: fix incorrect steps on disable EEE
netlink: annotate data races around nlk->bound
net: pcs: xpcs: fix incorrect CL37 AN sequence
net: sfp: Fix typo in state machine debug string
net/sched: sch_taprio: properly cancel timer from taprio_destroy()
net: bridge: fix under estimation in br_get_linkxstats_size()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Add another allowed address for TI sn65dsi86
- Drop more redundant minItems/maxItems
- Fix more graph 'unevaluatedProperties' warnings in media bindings
* tag 'devicetree-fixes-for-5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: drm/bridge: ti-sn65dsi86: Fix reg value
dt-bindings: Drop more redundant 'maxItems/minItems'
dt-bindings: media: Fix more graph 'unevaluatedProperties' related warnings
|
|
While the MV88E6390 switch chip exists, one is supposed to use a
compatible of "marvell,mv88e6190" for it. Fix this in the given example.
Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
Fixes: a3c53be55c95 ("net: dsa: mv88e6xxx: Support multiple MDIO busses")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Correct indentation warning:
ilitek,ili9341.yaml:25:9: [warning] wrong indentation: expected 10 but found 8 (indentation)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210819101020.26368-1-krzysztof.kozlowski@canonical.com
(cherry picked from commit 333ba0d9d5d5a2cf1f6bbb754045e4f2cb3ed22d)
Link: https://lore.kernel.org/dri-devel/CAL_JsqKcTfgnXNYzGDSFhKS2udhw2Dvk04ODwTxUdDRQjKdT0Q@mail.gmail.com/
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
|
|
make dtbs_check:
arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dt.yaml: bridge@2c: reg:0:0: 45 was expected
According to the datasheet, the I2C address can be either 0x2c or 0x2d,
depending on the ADDR control input.
Fixes: e3896e6dddf0b821 ("dt-bindings: drm/bridge: Document sn65dsi86 bridge bindings")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Link: https://lore.kernel.org/r/08f73c2aa0d4e580303357dfae107d084d962835.1632486753.git.geert+renesas@glider.be
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Another round of removing redundant minItems/maxItems from new schema in
the recent merge window.
If a property has an 'items' list, then a 'minItems' or 'maxItems' with the
same size as the list is redundant and can be dropped. Note that is DT
schema specific behavior and not standard json-schema behavior. The tooling
will fixup the final schema adding any unspecified minItems/maxItems.
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Cc: Marek Vasut <marex@denx.de>
Cc: Joakim Zhang <qiangqing.zhang@nxp.com>
Cc: dri-devel@lists.freedesktop.org
Cc: netdev@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210928222920.2204761-1-robh@kernel.org
|
|
The graph schema doesn't allow custom properties on endpoint nodes for
'#/properties/port' and '#/$defs/port-base' should be used instead. This
doesn't matter until 'unevaluatedProperties' support is implemented.
Cc: Dave Stevenson <dave.stevenson@raspberrypi.com>
Cc: Jacopo Mondi <jacopo@jmondi.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: "Paul J. Murphy" <paul.j.murphy@intel.com>
Cc: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Cc: linux-media@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Link: https://lore.kernel.org/r/20210820001457.1705142-1-robh@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-linus
Georgi writes:
interconnect fixes for v5.15
This contains a few fixes for the sdm660 driver:
- sdm660: Fix id of slv_cnoc_mnoc_cfg
- sdm660: Correct NOC_QOS_PRIORITY shift and mask
- sdm660: Add missing a2noc qos clocks
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
interconnect: qcom: sdm660: Add missing a2noc qos clocks
dt-bindings: interconnect: sdm660: Add missing a2noc qos clocks
interconnect: qcom: sdm660: Correct NOC_QOS_PRIORITY shift and mask
interconnect: qcom: sdm660: Fix id of slv_cnoc_mnoc_cfg
|
|
Change the nodename in the example with spi-nand from 'spi-flash@1'
to 'flash@1' to make the schema uniform with both spi-nand and spi-nor
flashes. jedec,spi-nor.yaml uses 'flash@' nodename for spi-nor flashes,
so make the spi-nand examples in dt-bindings use it too for uniformity.
Signed-off-by: Apurva Nandan <a-nandan@ti.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210920142713.129295-3-a-nandan@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Revert fw_devlink tracking 'phy-handle' links. This broke at least a
few platforms. A better solution is being worked on.
- Add Samsung UFS binding which fell thru the cracks
- Doc reference fixes from Mauro
- Fix for restricted DMA error handling
* tag 'devicetree-fixes-for-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: arm: Fix Toradex compatible typo
of: restricted dma: Fix condition for rmem init
dt-bindings: arm: mediatek: mmsys: update mediatek,mmsys.yaml reference
dt-bindings: net: dsa: sja1105: update nxp,sja1105.yaml reference
dt-bindings: ufs: Add bindings for Samsung ufs host
Revert "of: property: fw_devlink: Add support for "phy-handle" property"
|
|
Fix board compatible typo reported by dtbs_check.
Fixes: f4d1577e9bc6 ("dt-bindings: arm: Convert Tegra board/soc bindings to json-schema")
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20210912165120.188490-1-david@ixit.cz
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Changeset cba3c40d1f97 ("dt-bindings: arm: mediatek: mmsys: convert to YAML format")
renamed: Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt
to: Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml.
Update its cross-reference accordingly.
Fixes: cba3c40d1f97 ("dt-bindings: arm: mediatek: mmsys: convert to YAML format")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/a87eb079a73e8ab41cdf6e40e80b1d1f868da6bd.1631785820.git.mchehab+huawei@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf.
Current release - regressions:
- vhost_net: fix OoB on sendmsg() failure
- mlx5: bridge, fix uninitialized variable usage
- bnxt_en: fix error recovery regression
Current release - new code bugs:
- bpf, mm: fix lockdep warning triggered by stack_map_get_build_id_offset()
Previous releases - regressions:
- r6040: restore MDIO clock frequency after MAC reset
- tcp: fix tp->undo_retrans accounting in tcp_sacktag_one()
- dsa: flush switchdev workqueue before tearing down CPU/DSA ports
Previous releases - always broken:
- ptp: dp83640: don't define PAGE0, avoid compiler warning
- igc: fix tunnel segmentation offloads
- phylink: update SFP selected interface on advertising changes
- stmmac: fix system hang caused by eee_ctrl_timer during suspend/resume
- mlx5e: fix mutual exclusion between CQE compression and HW TS
Misc:
- bpf, cgroups: fix cgroup v2 fallback on v1/v2 mixed mode
- sfc: fallback for lack of xdp tx queues
- hns3: add option to turn off page pool feature"
* tag 'net-5.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (67 commits)
mlxbf_gige: clear valid_polarity upon open
igc: fix tunnel offloading
net/{mlx5|nfp|bnxt}: Remove unnecessary RTNL lock assert
net: wan: wanxl: define CROSS_COMPILE_M68K
selftests: nci: replace unsigned int with int
net: dsa: flush switchdev workqueue before tearing down CPU/DSA ports
Revert "net: phy: Uniform PHY driver access"
net: dsa: destroy the phylink instance on any error in dsa_slave_phy_setup
ptp: dp83640: don't define PAGE0
bnx2x: Fix enabling network interfaces without VFs
Revert "Revert "ipv4: fix memory leaks in ip_cmsg_send() callers""
tcp: fix tp->undo_retrans accounting in tcp_sacktag_one()
net-caif: avoid user-triggerable WARN_ON(1)
bpf, selftests: Add test case for mixed cgroup v1/v2
bpf, selftests: Add cgroup v1 net_cls classid helpers
bpf, cgroups: Fix cgroup v2 fallback on v1/v2 mixed mode
bpf: Add oversize check before call kvcalloc()
net: hns3: fix the timing issue of VF clearing interrupt sources
net: hns3: fix the exception when query imp info
net: hns3: disable mac in flr process
...
|
|
This patch adds DT bindings for Samsung ufs hci
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Link: https://lore.kernel.org/r/20210915111844.42752-1-chanho61.park@samsung.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
It adds the missing a2noc clocks required for QoS registers programming
per downstream kernel[1].
[1] https://source.codeaurora.org/quic/la/kernel/msm-4.4/tree/arch/arm/boot/dts/qcom/sdm660-bus.dtsi?h=LA.UM.8.2.r1-04800-sdm660.0#n43
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Link: https://lore.kernel.org/r/20210824043435.23190-2-shawn.guo@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Pull auxdisplay updates from Miguel Ojeda:
"An assortment of improvements for auxdisplay:
- Replace symbolic permissions with octal permissions (Jinchao Wang)
- ks0108: Switch to use module_parport_driver() (Andy Shevchenko)
- charlcd: Drop unneeded initializers and switch to C99 style (Andy
Shevchenko)
- hd44780: Fix oops on module unloading (Lars Poeschel)
- Add I2C gpio expander example (Ralf Schlatterbeck)"
* tag 'auxdisplay-for-linus-v5.15-rc1' of git://github.com/ojeda/linux:
auxdisplay: Replace symbolic permissions with octal permissions
auxdisplay: ks0108: Switch to use module_parport_driver()
auxdisplay: charlcd: Drop unneeded initializers and switch to C99 style
auxdisplay: hd44780: Fix oops on module unloading
auxdisplay: Add I2C gpio expander example
|
|
Pull virtio updates from Michael Tsirkin:
- vduse driver ("vDPA Device in Userspace") supporting emulated virtio
block devices
- virtio-vsock support for end of record with SEQPACKET
- vdpa: mac and mq support for ifcvf and mlx5
- vdpa: management netlink for ifcvf
- virtio-i2c, gpio dt bindings
- misc fixes and cleanups
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (39 commits)
Documentation: Add documentation for VDUSE
vduse: Introduce VDUSE - vDPA Device in Userspace
vduse: Implement an MMU-based software IOTLB
vdpa: Support transferring virtual addressing during DMA mapping
vdpa: factor out vhost_vdpa_pa_map() and vhost_vdpa_pa_unmap()
vdpa: Add an opaque pointer for vdpa_config_ops.dma_map()
vhost-iotlb: Add an opaque pointer for vhost IOTLB
vhost-vdpa: Handle the failure of vdpa_reset()
vdpa: Add reset callback in vdpa_config_ops
vdpa: Fix some coding style issues
file: Export receive_fd() to modules
eventfd: Export eventfd_wake_count to modules
iova: Export alloc_iova_fast() and free_iova_fast()
virtio-blk: remove unneeded "likely" statements
virtio-balloon: Use virtio_find_vqs() helper
vdpa: Make use of PFN_PHYS/PFN_UP/PFN_DOWN helper macro
vsock_test: update message bounds test for MSG_EOR
af_vsock: rename variables in receive loop
virtio/vsock: support MSG_EOR bit processing
vhost/vsock: support MSG_EOR bit processing
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Disable fw_devlinks on x86 DT platforms to fix OLPC
- More replacing oneOf+const with enum on a few new schemas
- Drop unnecessary type references on Xilinx SPI binding schema
* tag 'devicetree-fixes-for-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
spi: dt-bindings: xilinx: Drop type reference on *-bits properties
dt-bindings: More use 'enum' instead of 'oneOf' plus 'const' entries
of: property: Disable fw_devlink DT support for X86
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"The broken down time conversion is similar to what is done in the time
subsystem since v5.14. The rest is fairly straightforward.
Subsystem:
- Switch to Neri and Schneider time conversion algorithm
Drivers:
- rx8025: add rx8035 support
- s5m: modernize driver and set range"
* tag 'rtc-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: rx8010: select REGMAP_I2C
dt-bindings: rtc: add Epson RX-8025 and RX-8035
rtc: rx8025: implement RX-8035 support
rtc: cmos: remove stale REVISIT comments
rtc: tps65910: Correct driver module alias
rtc: move RTC_LIB_KUNIT_TEST to proper location
rtc: lib_test: add MODULE_LICENSE
rtc: Improve performance of rtc_time64_to_tm(). Add tests.
rtc: s5m: set range
rtc: s5m: enable wakeup only when available
rtc: s5m: signal the core when alarm are not available
rtc: s5m: switch to devm_rtc_allocate_device
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"The changes this time around are mostly janitorial in nature. A lot of
this is simplifications of drivers using device-managed functions and
improving compilation coverage.
The Mediatek display PWM driver now supports the atomic API.
Cleanups and minor fixes make up the remainder of this set"
* tag 'pwm/for-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (54 commits)
pwm: mtk-disp: Implement atomic API .get_state()
pwm: mtk-disp: Fix overflow in period and duty calculation
pwm: mtk-disp: Implement atomic API .apply()
pwm: mtk-disp: Adjust the clocks to avoid them mismatch
dt-bindings: pwm: rockchip: Add description for rk3568
pwm: Make pwmchip_remove() return void
pwm: sun4i: Don't check the return code of pwmchip_remove()
pwm: sifive: Don't check the return code of pwmchip_remove()
pwm: samsung: Don't check the return code of pwmchip_remove()
pwm: renesas-tpu: Don't check the return code of pwmchip_remove()
pwm: rcar: Don't check the return code of pwmchip_remove()
pwm: pca9685: Don't check the return code of pwmchip_remove()
pwm: omap-dmtimer: Don't check the return code of pwmchip_remove()
pwm: mtk-disp: Don't check the return code of pwmchip_remove()
pwm: imx-tpm: Don't check the return code of pwmchip_remove()
pwm: img: Don't check the return code of pwmchip_remove()
pwm: cros-ec: Don't check the return code of pwmchip_remove()
pwm: brcmstb: Don't check the return code of pwmchip_remove()
pwm: atmel-tcb: Don't check the return code of pwmchip_remove()
pwm: atmel-hlcdc: Don't check the return code of pwmchip_remove()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal updates from Daniel Lezcano:
- Add the tegra3 thermal sensor and fix the compilation testing on
tegra by adding a dependency on ARCH_TEGRA along with COMPILE_TEST
(Dmitry Osipenko)
- Fix the error code for the exynos when devm_get_clk() fails (Dan
Carpenter)
- Add the TCC cooling support for AlderLake platform (Sumeet Pawnikar)
- Add support for hardware trip points for the rcar gen3 thermal driver
and store TSC id as unsigned int (Niklas Söderlund)
- Replace the deprecated CPU-hotplug functions get_online_cpus() and
put_online_cpus (Sebastian Andrzej Siewior)
- Add the thermal tools directory in the MAINTAINERS file (Daniel
Lezcano)
- Fix the Makefile and the cross compilation flags for the userspace
'tmon' tool (Rolf Eike Beer)
- Allow to use the IMOK independently from the GDDV on Int340x (Sumeet
Pawnikar)
- Fix the stub thermal_cooling_device_register() function prototype
which does not match the real function (Arnd Bergmann)
- Make the thermal trip point optional in the DT bindings (Maxime
Ripard)
- Fix a typo in a comment in the core code (Geert Uytterhoeven)
- Reduce the verbosity of the trace in the SoC thermal tegra driver
(Dmitry Osipenko)
- Add the support for the LMh (Limit Management hardware) driver on the
QCom platforms (Thara Gopinath)
- Allow processing of HWP interrupt by adding a weak function in the
Intel driver (Srinivas Pandruvada)
- Prevent an abort of the sensor probe is a channel is not used
(Matthias Kaehlcke)
* tag 'thermal-v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal/drivers/qcom/spmi-adc-tm5: Don't abort probing if a sensor is not used
thermal/drivers/intel: Allow processing of HWP interrupt
dt-bindings: thermal: Add dt binding for QCOM LMh
thermal/drivers/qcom: Add support for LMh driver
firmware: qcom_scm: Introduce SCM calls to access LMh
thermal/drivers/tegra-soctherm: Silence message about clamped temperature
thermal: Spelling s/scallbacks/callbacks/
dt-bindings: thermal: Make trips node optional
thermal/core: Fix thermal_cooling_device_register() prototype
thermal/drivers/int340x: Use IMOK independently
tools/thermal/tmon: Add cross compiling support
thermal/tools/tmon: Improve the Makefile
MAINTAINERS: Add missing userspace thermal tools to the thermal section
thermal/drivers/intel_powerclamp: Replace deprecated CPU-hotplug functions.
thermal/drivers/rcar_gen3_thermal: Store TSC id as unsigned int
thermal/drivers/rcar_gen3_thermal: Add support for hardware trip points
drivers/thermal/intel: Add TCC cooling support for AlderLake platform
thermal/drivers/exynos: Fix an error code in exynos_tmu_probe()
thermal/drivers/tegra: Correct compile-testing of drivers
thermal/drivers/tegra: Add driver for Tegra30 thermal sensor
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- several device tree bindings for input devices have been converted to
yaml
- dropped no longer used ixp4xx-beeper and CSR Prima2 PWRC drivers
- analog joystick has been converted to use ktime API and no longer
warn about low resolution timers
- a few driver fixes
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (24 commits)
Input: analog - always use ktime functions
Input: mms114 - support MMS134S
Input: elan_i2c - reduce the resume time for controller in Whitebox
Input: edt-ft5x06 - added case for EDT EP0110M09
Input: adc-keys - drop bogus __refdata annotation
Input: Fix spelling mistake in Kconfig "useable" -> "usable"
Input: Fix spelling mistake in Kconfig "Modul" -> "Module"
Input: remove dead CSR Prima2 PWRC driver
Input: adp5589-keys - use the right header
Input: adp5588-keys - use the right header
dt-bindings: input: tsc2005: Convert to YAML schema
Input: ep93xx_keypad - prepare clock before using it
dt-bindings: input: sun4i-lradc: Add wakeup-source
dt-bindings: input: Convert Regulator Haptic binding to a schema
dt-bindings: input: Convert Pixcir Touchscreen binding to a schema
dt-bindings: input: Convert ChipOne ICN8318 binding to a schema
Input: pm8941-pwrkey - fix comma vs semicolon issue
dt-bindings: power: reset: qcom-pon: Convert qcom PON binding to yaml
dt-bindings: input: pm8941-pwrkey: Convert pm8941 power key binding to yaml
dt-bindings: power: reset: Change 'additionalProperties' to true
...
|
|
Properties with standard unit suffixes such as '-bits' don't need a
type.
Cc: Mark Brown <broonie@kernel.org>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: linux-spi@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210910165945.2852999-1-robh@kernel.org
|
|
'enum' is equivalent to 'oneOf' with a list of 'const' entries, but 'enum'
is more concise and yields better error messages.
Fix a couple more cases which have appeared.
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Mark Brown <broonie@kernel.org>
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jonathan Marek <jonathan@marek.ca>
Cc: Aswath Govindraju <a-govindraju@ti.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Cc: linux-spi@vger.kernel.org
Cc: linux-watchdog@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210910165153.2843871-1-robh@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes that have been gathered before rc1,
including a few regression fixes for the problem in the previous pull
request"
* tag 'sound-fix-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: gus: Fix repeated probe for ISA interwave card
ALSA: gus: Fix repeated probes of snd_gus_create()
ALSA: vx222: fix null-ptr-deref
ASoC: rockchip: i2s: Fix concurrency between tx/rx
ASoC: mt8195: correct the dts parsing logic about DPTX and HDMITX
ASoC: Intel: boards: Fix CONFIG_SND_SOC_SDW_MOCKUP select
ASoC: dt-bindings: fsl_rpmsg: Add compatible string for i.MX8ULP
ALSA: usb-audio: Add registration quirk for JBL Quantum 800
ASoC: rt5682: fix headset background noise when S3 state
ASoC: dt-bindings: mt8195: remove dependent headers in the example
ASoC: mediatek: SND_SOC_MT8195 should depend on ARCH_MEDIATEK
ASoC: samsung: s3c24xx_simtec: fix spelling mistake "devicec" -> "device"
ASoC: audio-graph: respawn Platform Support
ASoC: mediatek: mt8195: add MTK_PMIC_WRAP dependency
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"New drivers/devices
- Support for Renesas RZ/G2L dma controller
- New driver for AMD PTDMA controller
Updates:
- Big pile of idxd updates
- Updates for Altera driver, stm32-dma, dw etc"
* tag 'dmaengine-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (83 commits)
dmaengine: sh: fix some NULL dereferences
dmaengine: sh: Fix unused initialization of pointer lmdesc
MAINTAINERS: Fix AMD PTDMA DRIVER entry
dmaengine: ptdma: remove PT_OFFSET to avoid redefnition
dmaengine: ptdma: Add debugfs entries for PTDMA
dmaengine: ptdma: register PTDMA controller as a DMA resource
dmaengine: ptdma: Initial driver for the AMD PTDMA
dmaengine: fsl-dpaa2-qdma: Fix spelling mistake "faile" -> "failed"
dmaengine: idxd: remove interrupt disable for dev_lock
dmaengine: idxd: remove interrupt disable for cmd_lock
dmaengine: idxd: fix setting up priv mode for dwq
dmaengine: xilinx_dma: Set DMA mask for coherent APIs
dmaengine: ti: k3-psil-j721e: Add entry for CSI2RX
dmaengine: sh: Add DMAC driver for RZ/G2L SoC
dmaengine: Extend the dma_slave_width for 128 bytes
dt-bindings: dma: Document RZ/G2L bindings
dmaengine: ioat: depends on !UML
dmaengine: idxd: set descriptor allocation size to threshold for swq
dmaengine: idxd: make submit failure path consistent on desc freeing
dmaengine: idxd: remove interrupt flag for completion list spinlock
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These are mostly ARM cpufreq driver updates, including one new
MediaTek driver that has just passed all of the reviews, with the
addition of a revert of a recent intel_pstate commit, some core
cpufreq changes and a DT-related update of the operating performance
points (OPP) support code.
Specifics:
- Add new cpufreq driver for the MediaTek MT6779 platform called
mediatek-hw along with corresponding DT bindings (Hector.Yuan).
- Add DCVS interrupt support to the qcom-cpufreq-hw driver (Thara
Gopinath).
- Make the qcom-cpufreq-hw driver set the dvfs_possible_from_any_cpu
policy flag (Taniya Das).
- Blocklist more Qualcomm platforms in cpufreq-dt-platdev (Bjorn
Andersson).
- Make the vexpress cpufreq driver set the CPUFREQ_IS_COOLING_DEV
flag (Viresh Kumar).
- Add new cpufreq driver callback to allow drivers to register with
the Energy Model in a consistent way and make several drivers use
it (Viresh Kumar).
- Change the remaining users of the .ready() cpufreq driver callback
to move the code from it elsewhere and drop it from the cpufreq
core (Viresh Kumar).
- Revert recent intel_pstate change adding HWP guaranteed performance
change notification support to it that led to problems, because the
notification in question is triggered prematurely on some systems
(Rafael Wysocki).
- Convert the OPP DT bindings to DT schema and clean them up while at
it (Rob Herring)"
* tag 'pm-5.15-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits)
Revert "cpufreq: intel_pstate: Process HWP Guaranteed change notification"
cpufreq: mediatek-hw: Add support for CPUFREQ HW
cpufreq: Add of_perf_domain_get_sharing_cpumask
dt-bindings: cpufreq: add bindings for MediaTek cpufreq HW
cpufreq: Remove ready() callback
cpufreq: sh: Remove sh_cpufreq_cpu_ready()
cpufreq: acpi: Remove acpi_cpufreq_cpu_ready()
cpufreq: qcom-hw: Set dvfs_possible_from_any_cpu cpufreq driver flag
cpufreq: blocklist more Qualcomm platforms in cpufreq-dt-platdev
cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support
cpufreq: scmi: Use .register_em() to register with energy model
cpufreq: vexpress: Use .register_em() to register with energy model
cpufreq: scpi: Use .register_em() to register with energy model
dt-bindings: opp: Convert to DT schema
dt-bindings: Clean-up OPP binding node names in examples
ARM: dts: omap: Drop references to opp.txt
cpufreq: qcom-cpufreq-hw: Use .register_em() to register with energy model
cpufreq: omap: Use .register_em() to register with energy model
cpufreq: mediatek: Use .register_em() to register with energy model
cpufreq: imx6q: Use .register_em() to register with energy model
...
|
