summaryrefslogtreecommitdiff
path: root/Documentation/devicetree
AgeCommit message (Collapse)AuthorFilesLines
2021-08-18dt-bindings: memory: convert Marvell MVEBU SDRAM controller to dtschemaKrzysztof Kozlowski2-21/+31
Convert Marvell MVEBU SDRAM controller bindings to DT schema format using json-schema. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210817093807.59531-1-krzysztof.kozlowski@canonical.com Signed-off-by: Rob Herring <robh@kernel.org>
2021-08-18dt-bindings: memory: convert Broadcom DPFE to dtschemaKrzysztof Kozlowski2-27/+48
Convert Broadcom DDR PHY Front End (DPFE) bindings to DT schema format using json-schema. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Markus Mayer <mmayer@broadcom.com> Link: https://lore.kernel.org/r/20210817080617.14503-1-krzysztof.kozlowski@canonical.com Signed-off-by: Rob Herring <robh@kernel.org>
2021-08-18dt-bindings: thermal: Add dt binding for QCOM LMhThara Gopinath1-0/+82
Add dt binding documentation to describe Qualcomm Limits Management Hardware node. Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210809191605.3742979-8-thara.gopinath@linaro.org
2021-08-18Merge tag 'qcom-drivers-for-5.15' of ↵Arnd Bergmann5-87/+119
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers Qualcomm driver updates for v5.15 This fixes the "shared memory state machine" (SMSM) interrupt logic to avoid missing transitions happening while the interrupts are masked. SM6115 support is added to smd-rpm and rpmpd. The Qualcomm SCM firmware driver is once again made possible to compile and load as a kernel module. An out-of-bounds error related to the cooling devices of the AOSS driver is corrected. The binding is converted to YAML and a generic compatible is introduced to reduce the driver churn. The GENI wrapper gains a helper function used in I2C and SPI for switching the serial engine hardware to use the wrapper's DMA-engine. Lastly it contains a number of cleanups and smaller fixes for rpmhpd, socinfo, CPR, mdt_loader and the GENI DT binding. * tag 'qcom-drivers-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: soc: qcom: smsm: Fix missed interrupts if state changes while masked soc: qcom: smsm: Implement support for get_irqchip_state soc: qcom: mdt_loader: be more informative on errors dt-bindings: qcom: geni-se: document iommus soc: qcom: smd-rpm: Add SM6115 compatible soc: qcom: geni: Add support for gpi dma soc: qcom: geni: move GENI_IF_DISABLE_RO to common header PM: AVS: qcom-cpr: Use nvmem_cell_read_variable_le_u32() drivers: soc: qcom: rpmpd: Add SM6115 RPM Power Domains dt-bindings: power: rpmpd: Add SM6115 to rpmpd binding dt-bindings: soc: qcom: smd-rpm: Add SM6115 compatible soc: qcom: aoss: Fix the out of bound usage of cooling_devs firmware: qcom_scm: Allow qcom_scm driver to be loadable as a permenent module soc: qcom: socinfo: Don't print anything if nothing found soc: qcom: rpmhpd: Use corner in power_off soc: qcom: aoss: Add generic compatible dt-bindings: soc: qcom: aoss: Convert to YAML dt-bindings: soc: qcom: aoss: Add SC8180X and generic compatible firmware: qcom_scm: remove a duplicative condition firmware: qcom_scm: Mark string array const Link: https://lore.kernel.org/r/20210816214840.581244-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-18Merge tag 'aspeed-5.15-devicetree' of ↵Arnd Bergmann2-46/+77
git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/dt ASPEED device tree updates for 5.15 - New machines * Facebook's Cloudripper * Facebook's Elbert * Facebook's Fuji All three carry the description of "Facebook's next generation switch platform with an AST2600 BMC integrated for health monitoring purpose." They share a 128 MB SPI NOR flash layout that is also used by some older platforms. * Inspur's NF5280M6, an x86 platform server with an AST2500-based BMC - SGPIO updates including AST2600 support - GPIO descriptions for the IBM AST2600 machines - Pinctrl fix - Updates to Facebook's AST2500 based machines * tag 'aspeed-5.15-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc: (23 commits) ARM: dts: aspeed: p10bmc: Add power control pins ARM: dts: aspeed: cloudripper: Add comments for "mdio1" ARM: dts: aspeed: minipack: Update flash partition table ARM: dts: aspeed: Add Facebook Fuji (AST2600) BMC ARM: dts: aspeed: Add Facebook Elbert (AST2600) BMC ARM: dts: aspeed: Add Facebook Cloudripper (AST2600) BMC ARM: dts: aspeed: Common dtsi for Facebook AST2600 Network BMCs ARM: dts: aspeed: wedge400: Use common flash layout ARM: dts: Add Facebook BMC 128MB flash layout ARM: dts: aspeed-g5: Remove ngpios from sgpio node. ARM: dts: aspeed-g6: Add SGPIO node. dt-bindings: aspeed-sgpio: Add ast2600 sgpio dt-bindings: aspeed-sgpio: Convert txt bindings to yaml. ARM: dts: aspeed: ast2500evb: Enable built in RTC ARM: dts: aspeed: tacoma: Add TPM reset GPIO ARM: dts: rainier, everest: Add TPM reset GPIO ARM: dts: aspeed: wedge100: Enable ADC channels ARM: dts: aspeed: galaxy100: Remove redundant ADC device ARM: dts: aspeed: wedge40: Remove redundant ADC device ARM: dts: aspeed: Enable ADC in Facebook AST2400 common dtsi ... Link: https://lore.kernel.org/r/CACPK8XdWRBb9cuDWGQPfK8R8TsZuydJQHsL4_e2w=HvCKAMogg@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-18Merge tag 'qcom-arm64-for-5.15' of ↵Arnd Bergmann2-0/+5
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm ARM64 updates for v5.15 SDM660 and SDM630 was concluded to be similar enough that they should be merged, and the derivative SDM636 was added to the bunch. The combined platform gained support for GPU, DMA, I2C, IMEM, display, power-domains, SDHCI, thermal, USB, interconnects, VADC, WLED and audio remoteproc. The Sony Xperia "Ganges" platform was similarly merged with "Nile", got cleaned up and gained touchscreen, USB, volume keys and uSD support. IPQ6018 gains USB2 and PCIe support and a few minor fixes. IPQ8074 gains SCM, PRNG and Crypto support and a DT style update of the PCIe nodes. MSM8916 gains Coresight STM support. The Xiaomi Redmi 2 is introduced, with touchscreen, notification LED and IMU support. MSM8996 gains support for GPU cooling and v3.0 of the SoC, which is used to introduce support for the Sony Xperia X Performance, XZ and XZs phones. SC7180 finally gains DisplayPort support and LPASS is updated accordingly. A number of fixes are introduced and with the newly introduced DRM aux bus in place Trogdor's panel is moved under the eDP bridge. SC7280 gained USB, eMMC, SD-card, QFPROM and IPA support, the new IDP2 board was added. SM6126 (aka Snapdragon 665) was introduced, together with the Sony Xperia 10II phone with support for framebuffer, USB, eMMC and volume keys. SM8150 gained inline crypto support for UFS enabled, CPU opp-tables was introduced to scale DDR and L3 frequencies and SPI nodes where added, in addition to a number of smaller fixes. SM8250 gained a number of minor fixes and had its serial engines wired up to use the GENI wrappers' DMA engines. SM8350 had wakeup-parent defined for the TLMM gpio node and I2C13 was introduced. SDM845 display clocks was corrected and Lenovo Yoga C630 got IPA enabled and now has working LTE connectivity. Additionally a number of minor fixes throughout to correct DT validation warnings. Lastly v5.14-rc3 is merge in to resolve the merge conflicts caused by the USB maintainer deciding to fix a regression in his tree. * tag 'qcom-arm64-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (114 commits) arm64: dts: qcom: sm8250: assign DSI clock source parents arm64: dts: qcom: sdm845-mtp: assign DSI clock source parents arm64: dts: qcom: sdm845: assign DSI clock source parents arm64: dts: qcom: sc7180: assign DSI clock source parents arm64: dts: qcom: sc7280-idp: Add device tree files for IDP2 dt-bindings: arm: qcom: Document qcom,sc7280-idp2 board arm64: dts: qcom: sm8350: fix IPA interconnects arm64: dts: qcom: sc7180: define ipa_fw_mem node arm64: dts: qcom: sc7280: enable IPA for sc7280-idp arm64: dts: qcom: sc7280: add IPA information arm64: dts: qcom: sc7180-trogdor: Move panel under the bridge chip arm64: dts: qcom: ipq8074: add PRNG node arm64: dts: qcom: ipq8074: add crypto nodes arm64: dts: qcom: sm8350: add qupv3_id_1/i2c13 nodes arm64: dts: qcom: ipq6018: Add pcie support arm64: dts: qcom: pm8150b: Add DTS node for PMIC VBUS booster arm64: dts: qcom: sm8150: add SPI nodes arm64: dts: qcom: msm8916: Enable CoreSight STM component arm64: dts: qcom: sc7280: Add qfprom node arm64: dts: qcom: sc7280: Fixup the cpufreq node ... Link: https://lore.kernel.org/r/20210816231223.586597-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-18dt-bindings: memory: convert Qualcomm Atheros DDR to dtschemaKrzysztof Kozlowski2-35/+61
Convert Qualcomm Atheros AR7xxx/AR9xxx DDR controller to DT schema format using json-schema. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210813143537.130310-1-krzysztof.kozlowski@canonical.com Signed-off-by: Rob Herring <robh@kernel.org>
2021-08-18dt-bindings: rng: convert Samsung Exynos TRNG to dtschemaKrzysztof Kozlowski2-17/+44
Convert Samsung Exynos SoC True Random Number Generator bindings to DT schema format using json-schema. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210811084306.28740-2-krzysztof.kozlowski@canonical.com Signed-off-by: Rob Herring <robh@kernel.org>
2021-08-18dt-bindings: irqchip: convert Samsung Exynos IRQ combiner to dtschemaKrzysztof Kozlowski2-50/+96
Convert Samsung Exynos SoC Interrupt Combiner Controller bindings to DT schema format using json-schema. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210811084306.28740-1-krzysztof.kozlowski@canonical.com Signed-off-by: Rob Herring <robh@kernel.org>
2021-08-18dt-bindings: ata: drop unused Exynos SATA bindingsKrzysztof Kozlowski1-30/+0
The Samsung Exynos SoC SATA bindings are not implemented in the kernel, not used and superseded by generic Documentation/devicetree/bindings/ata/ahci-platform.txt bindings. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210811083859.28234-1-krzysztof.kozlowski@canonical.com Signed-off-by: Rob Herring <robh@kernel.org>
2021-08-18dt-bindings: net: renesas,etheravb: Drop "int_" prefix and "_n" suffix from ↵Biju Das1-2/+2
interrupt names This patch updates interrupt-names with dropping "int_" prefix and "_n" suffix. Fixes: 1dbd981fcf2a ("dt-bindings: net: renesas,etheravb: Document Gigabit Ethernet IP") Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20210815133926.22860-1-biju.das.jz@bp.renesas.com Signed-off-by: Rob Herring <robh@kernel.org>
2021-08-18dt-bindings: hwmon: Add bindings for Winbond W83781DLinus Walleij1-0/+41
This adds a device tree binding for the Winbond W83781D and its sibling HW monitoring ICs. This is used in for example the Freecom FSG-3 router/NAS. Cc: devicetree@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210729230543.2853485-1-linus.walleij@linaro.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-08-18dt-bindings: sbrmi: Add SB-RMI hwmon driver bindingsAkshay Gupta1-0/+53
- Document device tree bindings for AMD SB-RMI emulated service. Signed-off-by: Akshay Gupta <Akshay.Gupta@amd.com> Signed-off-by: Naveen Krishna Chatradhi <nchatrad@amd.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210726133615.9709-3-nchatrad@amd.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-08-18dt-bindings: rtc: add Epson RX-8025 and RX-8035Mathew McBride1-0/+3
These are supported by the rtc-rx8025 module. RX-8025 also has support in ds1307 due to compatible time registers. Signed-off-by: Mathew McBride <matt@traverse.com.au> Reviewed-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210709044518.28769-3-matt@traverse.com.au
2021-08-17Merge tag 'samsung-pinctrl-5.15' of ↵Linus Walleij1-0/+1
https://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/samsung into devel Samsung pinctrl drivers changes for v5.15 1. Fix number of pins in one GPIO pin bank. 2. Add support for Exynos850 SoC (Exynos3830).
2021-08-17Merge tag 'iio-for-5.15b' of ↵Greg Kroah-Hartman2-0/+136
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: 2nd set of new IIO device support and cleanups for the 5.15 cycle. A small pull request to pick up a few new drivers and some cleanup and fix patches. New device support * ad5110 non-volatile digital potentiometer - New driver * renesas rzl/gl2 12-bit / 8 channel ADC block - New driver and bindings Minor or late breaking fixes and cleanups * ltc2983 - Fix a false assumption of initial interrupt during probe(). * hp03 - Use devm_* to simplify probe and allow the remove function to be dropped. * rockchip_saradc - Use a regulator notifier to reduce overheads of querying the scale. * tag 'iio-for-5.15b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: iio: adc: Add driver for Renesas RZ/G2L A/D converter dt-bindings: iio: adc: Add binding documentation for Renesas RZ/G2L A/D converter iio: pressure: hp03: update device probe to register with devm functions iio: adc: rockchip_saradc: add voltage notifier so get referenced voltage once at probe iio: ltc2983: fix device probe iio: potentiometer: Add driver support for AD5110 dt-bindings: iio: potentiometer: Add AD5110 in trivial-devices
2021-08-17spi: rockchip-sfc: Bindings for Rockchip serial flash controllerChris Morgan1-0/+91
Add bindings for the Rockchip serial flash controller. New device specific parameter of rockchip,sfc-no-dma included in documentation. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Signed-off-by: Jon Lin <jon.lin@rock-chips.com> Tested-by: Peter Geis <pgwipeout@gmail.com> Link: https://lore.kernel.org/r/20210812134546.31340-2-jon.lin@rock-chips.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-17dt-bindings: phy: mediatek: tphy: support type switch by pericfgChunfeng Yun1-0/+16
Add support type switch by pericfg register between USB3, PCIe, SATA, SGMII, this is used to replace the way through efuse or jumper. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1629191987-20774-1-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-08-17Merge tag 'qcom-dts-for-5.15' of ↵Arnd Bergmann1-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm dts updates for v5.15 This introduces the MSM8226 platform and an initial dts for the Samsung Galaxy S III Neo phone. MSM8974 gains another UART and this is used to enable Bluetooth on the Sony Xperia Z2 Tablet. Samsung Galaxy S5 gains regulator definitions for audio and modem remoteprocs, effectively enabling these. DSI clocks on APQ8064 are updates as the old legacy clock names are no longer supported by the driver. And IPQ806x GMAC nodes gains AHB resets wired up. Lastly APQ8060 is converted to a SPDX header and the ethernet node is updates in accordance with the binding. * tag 'qcom-dts-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: ARM: dts: qcom: add ahb reset to ipq806x-gmac ARM: dts: qcom: Fix up APQ8060 DragonBoard license ARM: dts: qcom: msm8974: castor: Add Bluetooth-related nodes ARM: dts: qcom: msm8974: Add blsp2_uart7 for bluetooth on sirius ARM: dts: qcom: Add initial DTS file for Samsung Galaxy S III Neo phone dt-bindings: arm: qcom: Document MSM8226 SoC binding ARM: dts: qcom: Add support for MSM8226 SoC ARM: dts: qcom: apq8060: Correct Ethernet node name and drop bogus irq property ARM: dts: qcom: apq8064: correct clock names ARM: dts: qcom: msm8974-klte: Enable remote processors Link: https://lore.kernel.org/r/20210816211957.579365-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-17Merge tag 'drm-msm-next-2021-08-12' of ↵Dave Airlie2-0/+89
https://gitlab.freedesktop.org/drm/msm into drm-next This is the main pull for v5.15, after the early pull request with drm/scheduler conversion: * New a6xx GPU support: a680 and 7c3 * dsi: 7nm phi, sc7280 support, test pattern generator support * mdp4 fixes for older hw like the nexus7 * displayport fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGs_tyanTeDGMH1X+Uf4wdyy7jYj-CinGXXVETiYOESahw@mail.gmail.com
2021-08-17Merge tag 'mediatek-drm-next-5.15' of ↵Dave Airlie1-1/+1
https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next Mediatek DRM Next for Linux 5.15 1. MT8133 AAL support, adjust rdma fifo threshold formula. 2. Implement mmap as GEM object function. 3. Add support for MT8167. 4. Test component initialization earlier in the function mtk_drm_crtc_create. 5. CMDQ refinement. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Chun-Kuang Hu <chunkuang.hu@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210816232427.13368-1-chunkuang.hu@kernel.org
2021-08-17Merge tag 'v5.14-rc3' into arm64-for-5.15Bjorn Andersson22-182/+274
The USB maintainer felt the strong need to push '1f958f3dff42 ("Revert "arm64: dts: qcom: Harmonize DWC USB3 DT nodes name"")' through the usb tree, so merge v5.14-rc3 to resolve the resulting merge conflicts. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-17Merge branch 'ib-rockchip' into develLinus Walleij1-1/+4
2021-08-17dt-bindings: gpio: change items restriction of clock for rockchip,gpio-bankJianqun Xu1-1/+4
In the past we only need on clock which name "pclk" for a gpio controller. In the new version gpio controller, there add some register to change debounce clock dynamic, so the dt node needs to add the second clock, we call it "dbclk". The clock property need 2 items on some rockchip chips such as RK3568 SoCs. Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com> Link: https://lore.kernel.org/r/20210816011948.1118959-5-jay.xu@rock-chips.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-08-17Merge tag 'imx-bindings-5.15' of ↵Arnd Bergmann3-7/+47
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX DT bindings update for 5.15: - Add vendor prefix for MNT Research GmbH, SKOV A/S and Traverse Technologies. - Add compatible for Nitrogen8 SoM, MNT Reform2, Traverse Ten64, SKOV i.MX6, SolidSense and i.MX8M GW7902 boards. - Add compatible for i.MX8QM JPEG codec. * tag 'imx-bindings-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: dt-bindings: arm: fsl: Add Traverse Ten64 (LS1088A) board dt-bindings: vendor-prefixes: add Traverse Technologies dt-bindings: arm: fsl: add SKOV imx6q and imx6dl based boards dt-bindings: vendor-prefixes: Add an entry for SKOV A/S dt-bindings: arm: imx: add imx8mm/imx8mn GW7902 support dt-bindings: arm: fsl: Add DHCOM PicoITX and DHCOM DRC02 boards dt-bindings: arm: fsl: add SolidSense boards dt-bindings: media: imx-jpeg: Add compatible for i.MX8QM JPEG codec dt-bindings: arm: fsl: add MNT Reform2 board dt-bindings: vendor-prefixes: add mntre dt-bindings: arm: fsl: add Nitrogen8 SoM Link: https://lore.kernel.org/r/20210814133853.9981-1-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-17dt-bindings: phy: Add bindings for HiKey 970 PCIe PHYMauro Carvalho Chehab1-0/+82
Document the bindings for HiKey 970 (hi3670) PCIe PHY interface, supported via the pcie-kirin driver. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/461495431dd28ad2779658659f137db4bd747aa8.1628061310.git.mchehab+huawei@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2021-08-17dt-bindings: PCI: kirin: Add support for Kirin970Mauro Carvalho Chehab1-1/+82
Add a new compatible, plus the new bindings needed by HiKey970 board. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/875a4571e253040d3885ee1f37467b0bade7361b.1628061310.git.mchehab+huawei@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2021-08-16Merge tag 'tegra-for-5.15-dt-bindings' of ↵Arnd Bergmann1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt dt-bindings: Changes for v5.15-rc1 This contains a single patch that adds the compatible string for the NVIDIA Jetson TX2 NX developer kit. * tag 'tegra-for-5.15-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: dt-bindings: tegra: Document NVIDIA Jetson TX2 NX developer kit Link: https://lore.kernel.org/r/20210813162157.2820913-1-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-16Merge tag 'renesas-arm-dt-for-v5.15-tag2' of ↵Arnd Bergmann1-8/+22
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt Renesas ARM DT updates for v5.15 (take two) - Pin control, ADC, and CANFD support for the RZ/G2L SoC, - Add interrupt-names properties to the Renesas RZ/A and RZ/G2L I2C Bus Interface. * tag 'renesas-arm-dt-for-v5.15-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: dt-bindings: i2c: renesas,riic: Make interrupt-names required arm64: dts: renesas: r9a07g044: Add I2C interrupt-names ARM: dts: rza: Add I2C interrupt-names dt-bindings: i2c: renesas,riic: Add interrupt-names arm64: dts: renesas: r9a07g044: Add CANFD node arm64: dts: renesas: r9a07g044: Add ADC node arm64: dts: renesas: r9a07g044: Add pinctrl node dt-bindings: clock: r9a07g044-cpg: Add entry for P0_DIV2 core clock Link: https://lore.kernel.org/r/cover.1628849623.git.geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-16dt-bindings: PCI: kirin: Convert kirin-pcie.txt to yamlMauro Carvalho Chehab3-51/+87
Convert the file into a JSON description at the yaml format. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/081c179ef2e0ddf11566144cd5967b15268565b4.1628061310.git.mchehab+huawei@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2021-08-16dt-bindings: usb: mtk-musb: add MT7623 compatibleSungbo Eo1-0/+1
Document MT7623 compatible for mtk-musb. Signed-off-by: Sungbo Eo <mans0n@gorani.run> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210808123840.176738-2-mans0n@gorani.run Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-16dt-bindings: power: supply: smb347-charger: Document USB VBUS regulatorDmitry Osipenko1-0/+30
SMB347 can supply power to USB VBUS, which is required by OTG-cable devices that want to switch USB port into the host mode. Add USB VBUS regulator properties. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-08-16mfd: tps65086: Make interrupt line optionalEmil Renner Berthing1-3/+0
The BeagleV Starlight v0.9 board[1] doesn't have the IRQB line routed to the SoC, but it is still useful to be able to reach the PMIC over I2C for the other functionality it provides such as GPIOs and regulator settings. [1] https://github.com/beagleboard/beaglev-starlight Signed-off-by: Emil Renner Berthing <kernel@esmil.dk> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-08-16dt-bindings: mfd: Convert tps65086.txt to YAMLEmil Renner Berthing2-54/+127
This converts the tps65086.txt binding description to YAML schema so dts files can be verified automatically. Signed-off-by: Emil Renner Berthing <kernel@esmil.dk> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-08-16dt-bindings: power: supply: max17042: describe interruptKrzysztof Kozlowski1-0/+2
The Maxim 17042-family of fuel gauges are often embedded in other Maxim chips, e.g. in Maxim 77693 which is a companion power management IC. In such designs there might be actually two interrupts: - INTB signaling change from charger, flash or MUIC, - ALERT signaling change from fuel gauge. Describe the interrupt in bindings to make it clear it is about the fuel gauge ALERT interrupt, not the INT. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-08-16dt-bindings: net: Add the properties for ipq4019 MDIOLuo Jie1-1/+14
The new added properties resource "reg" is for configuring ethernet LDO in the IPQ5018 chipset, the property "clocks" is for configuring the MDIO clock source frequency. Signed-off-by: Luo Jie <luoj@codeaurora.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-16Merge 5.14-rc6 into usb-nextGreg Kroah-Hartman1-41/+0
We need the USB fix in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-16Merge 5.14-rc6 into staging-nextGreg Kroah-Hartman1-41/+0
We need the IIO fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-15dt-bindings: iio: adc: Add binding documentation for Renesas RZ/G2L A/D ↵Lad Prabhakar1-0/+134
converter Add binding documentation for Renesas RZ/G2L A/D converter block. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210804202118.25745-2-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-15dt-bindings: PCI: kirin: Fix compatible stringMauro Carvalho Chehab1-2/+2
The pcie-kirin driver doesn't declare a hisilicon,kirin-pcie. Also, remove the useless comment after the description, as other compat will be supported by the same driver in the future. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/3e3e29a88f8e71eb228edf33d70cbe70db431408.1627965261.git.mchehab+huawei@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2021-08-15dt-bindings: iio: potentiometer: Add AD5110 in trivial-devicesMugilraj Dhavachelvan1-0/+2
Add AD5110, a Nonvolatile Digital Potentiometer into trivial-devices.yaml. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Mugilraj Dhavachelvan <dmugil2000@gmail.com> Link: https://lore.kernel.org/r/20210814175607.48399-2-dmugil2000@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-15Merge tag 'iio-for-5.15a' of ↵Greg Kroah-Hartman18-70/+1087
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: First set of new IIO and counter device support, cleanups and features for 5.15 Usual mix of cleanups and new device support. Counter ====== Cleanups and refactoring: * treewide - Ensure attempts to set invalid modes result in -EINVAL return. - Rename counter_count_function to counter_function as the middle count is redundant. - Standardize error returns when limits are exceeded. * 104-quad: - Document the lock. - Return an error if attempt to set the ceiling value in a mode that doesn't support it. * intel-qep - Drop unused bitops.h include IIO === New device support * bma255 - Add support fo the bosch,bmc156_accel which oddly only exposes the INT2 interrupt pin and not INT1. Patch set includes enabling use of INT2. * ingenic_adc - Add support for JZ4760 and similar and update bindings - Add support for JZ4760B and update bindings * rockchip_saradc - Add support for rk3568 ADC (separate channel array as more channels) * sgp40 gas sensor used to measure air quality - New driver including binding and ABI documentation. Bindings -------- * Add missing bindings for many DACs where the binding was effectively implicit due to fallback probe methods in I2C and SPI. adi,ad5064 adi,ad5360 adi,ad5380 adi,ad5421 adi,ad5449 adi,ad5504 adi,ad5624r adi,ad5686 / adi,ad5696 adi,ad5761 adi,ad5764 adi,ad5791 adi,ad8801 capella,cm3323 (also add explicit of_device_id table) microchip,mcp4922 * bosch,bma255 - Interrupt type in example was opposite of what the device expects. It's possible that a particular board had an inverter, but we definitely don't want the example to suggest this would be normal. - Add interrupt-names to allow for cases where only INT2 is connected. - Sort compatibles - Merge in very similar bosch,bma180 binding. New feature ----------- * Devices only allowed to provide either extended_name or a label for given channel. If extend_name is used (generally discouraged but can't be removed as it would be a userspaece ABI change), then the label sysfs attribute will provide the extended_name. This allows some userspace parser simplications and hardening. * hid-sensors-pres - Add a timestamp channel (either from hardware, or locally filled). * vcnl3020 - Add periodic sensor mode used to provide IIO events. Cleanups / minor fixes ---------------------- * core/buffers - Avoid unnecessary zeroing of bitmaps that are immediately overwritten. - Move a sanity check earlier to simplify error path. * Quite a few cases of refactors to use devm_* for all of probe and drop remove - adjd_s311 - adxl345 - bma220 - da280 - dmard10 - ds311 - max5481 - max5821 - rfd77402 - tcs3414 - tmp006 * ad5624r - Fix incorrect handling of a regulator that was preventing use of internal regulators. * adjd_s311 - Allocate a buffer as part of iio_priv() structure as maximum size is small enough, no significant advantage in making it flexible sized. * bma220 - Make handling of suspend and resume closer to the probe() wrt to the rather odd interface, that suspend mode is entered by reading a register. * ep93xx - Prepare clock before using (part of conversion to CCF) * fsl-imx25-gcq - Use local device pointer. - Adjust handling of platform_get_irq() to not check for 0 as an error. The function is documented as never returning it. * hid-sensors - Use devm_kmemdup() consistently across all drivers to simplify channel structure allocation management. * meson-saradc - Drop BL30 integration on G12A and newer SoCs as not used. - Whitespace fixes. * mpu6050 - Add per device type startup times. This avoids an issue with having to dsicard initial data from gyroscopes when they were still stabilizing. * rfd77402 - Change from passing private data, to passing i2c_client where only that is needed, reducing back and forth in pm functions. * si1145 - Drop pointless continue * st-sensors - Cleanup of includes to remove unused and add missing headers that are used. - Use some devm functions to simplify probe() and remove() - gets us part way towards a fully device managed driver. * sx9310 - Switch from of to generic properties to enable ACPI bindings. * vcnl3020 - Add DMA safe buffer for bulk transfers. - Drop use of iio_claim_direct() in a driver that has no mode changes. A local lock is more appropriate. * tag 'iio-for-5.15a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (77 commits) counter: 104-quad-8: Describe member 'lock' in 'quad8' iio: hid-sensor-press: Add timestamp channel counter: Rename counter_count_function to counter_function counter: Rename counter_signal_value to counter_signal_level counter: Standardize to ERANGE for limit exceeded errors counter: Return error code on invalid modes counter: 104-quad-8: Return error when invalid mode during ceiling_write iio: accel: bmc150: Add support for BMC156 iio: accel: bmc150: Make it possible to configure INT2 instead of INT1 dt-bindings: iio: accel: bma255: Add bosch,bmc156_accel dt-bindings: iio: accel: bma255: Add interrupt-names iio: light: cm3323: Add of_device_id table dt-bindings: Add bindings for Capella cm3323 Ambient Light Sensor iio: chemical: Add driver support for sgp40 dt-bindings: iio: chemical: Add trivial DT binding for sgp40 iio: ep93xx: Prepare clock before using it iio: adc: fsl-imx25-gcq: adjust irq check to match docs and simplify code iio: dac: max5821: convert device register to device managed function dt-bindings: iio/adc: ingenic: add the JZ4760(B) socs to the sadc Documentation iio/adc: ingenic: add JZ4760B support to the sadc driver ...
2021-08-14dt-bindings: timer: Remove binding for energymicro,efm32-timer.txtMichal Simek1-23/+0
The driver has been removed by commit 523d83ef0979 ("clocksource/drivers/efm32: Drop unused timer code") that's why binding doc shouldn't be also valid anymore. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/571fc4b2e6d41c61b7f4445601a79bb50aace2e7.1628245879.git.michal.simek@xilinx.com Signed-off-by: Rob Herring <robh@kernel.org>
2021-08-14dt-bindings: gpu: mali-bifrost: Add RK3568 compatibleEzequiel Garcia1-0/+1
The Rockchip RK3568 SoC has a Bifrost Mali-G52 GPU, add a compatible string for it. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Link: https://lore.kernel.org/r/20210805025948.10900-3-ezequiel@collabora.com Signed-off-by: Rob Herring <robh@kernel.org>
2021-08-14dt-bindings: thermal: Make trips node optionalMaxime Ripard1-1/+1
Even though the previous binding made it a required child node, the implementation in Linux never made it mandatory and just ignored thermal zones without trip points. This was even effectively encouraged, since the thermal core wouldn't allow a thermal sensor to probe without a thermal zone. In the case where you had a thermal device that had multiple sensors but with enough knowledge to provide trip points for only a few of them, this meant that the only way to make that driver probe was to provide a thermal zone without the trips node required by the binding. This obviously led to a fair number of device trees doing exactly that, making the initial binding requirement ineffective. Let's make it clear by dropping that requirement. Cc: Amit Kucheria <amitk@kernel.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-pm@vger.kernel.org Cc: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210721140424.725744-34-maxime@cerno.tech
2021-08-14dt-bindings: power: Extend battery bindings with chemistryLinus Walleij1-0/+14
This adds a battery-chemistry property and bindings for the different "technologies" that are used in Linux. More types can be added. This is needed to convert the custom ST-Ericsson AB8500 battery properties over to the generic battery bindings. Cc: devicetree@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-08-14dt-bindings: power: add rk3568-pmu-io-domain supportMichael Riesch2-0/+31
Add binding for the RK3568 along a SoC-specific description of voltage supplies. Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com> [add soc-specific section] Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210805120107.27007-2-michael.riesch@wolfvision.net Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-08-14dt-bindings: arm: fsl: Add Traverse Ten64 (LS1088A) boardMathew McBride1-0/+6
Document the compatible for the Ten64 board which will be included as freescale/fsl-ls1088a-ten64.dtb in arm64. Signed-off-by: Mathew McBride <matt@traverse.com.au> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-08-14dt-bindings: vendor-prefixes: add Traverse TechnologiesMathew McBride1-0/+2
Traverse Technologies is a designer and manufacturer of networking appliances. Signed-off-by: Mathew McBride <matt@traverse.com.au> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-08-14dt-bindings: arm: fsl: add SKOV imx6q and imx6dl based boardsOleksij Rempel1-0/+5
Add SKOV imx6q/dl LT2, LT6 and mi1010ait-1cp1 boards. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-22 15:27:50 +0300