Age | Commit message (Collapse) | Author | Files | Lines |
|
1. This patch adds pinctrl file for mt8195.
2. This patch adds mt8195 compatible node in binding document.
Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210413055702.27535-2-zhiyong.tao@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add the pinctrl bindings for the JZ4730 SoC, the JZ4750 SoC,
the JZ4755 SoC, the JZ4775 SoC and the X2000 SoC from Ingenic.
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1618757073-1724-8-git-send-email-zhouyanjie@wanyeetech.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
This helps validating DTS files.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210420210104.10555-1-zajec5@gmail.com
|
|
Introduce power-limits node in mt76 binding in order to specify
per-rate power limit values for each 802.11n/802.11ac rate
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
The 'dsa-tag-protocol' is used to force a switch tree to use a
particular tag protocol, typically because the Ethernet controller
that it is connected to is not compatible with the default one.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This property is required for every thermal sensor as it's used when
using phandles.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210415112121.4999-1-zajec5@gmail.com
|
|
This helps validating DTS files.
Changes that require mentioning:
1. reg-names
"mspi_regs" and "bspi_regs" were renamed to "mspi" and "bspi" as that
is what's used in DTS files and in Linux driver
2. interrupt-names
Names were reordered. "mspi_done" has to go first as it's always
required.
3. spi-rx-bus-width
Property description was dropped as it's part of the
spi-controller.yaml
4. Examples:
* drop partitions as they are well documented elsewhere
* regs and interrupts were formatted and reordered to match yaml
* <0x1c> was replaced with <&gic>
* "m25p80" node name became "flash"
* dropped invalid "m25p,fast-read" property
* dropped undocumented and Linux-unused "clock-names"
This rewritten binding validates cleanly using the "dt_binding_check".
Some Linux stored DTS files will require reordering regs and interrupts
to make dtbs_check happy.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210416194723.23855-1-zajec5@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add trivial device entry for TPS53676
Signed-off-by: Erik Rosen <erik.rosen@metormote.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210318212441.69050-2-erik.rosen@metormote.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add vendor prefix "blutek" for BluTek Power.
Add trivial device entry for BPA-RS600.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210317040231.21490-1-chris.packham@alliedtelesis.co.nz
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add infineon,ir36021 to trivial-devices.yaml.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210301035954.16713-2-chris.packham@alliedtelesis.co.nz
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
No functional changes, just adding a new compatible for a diferent
SoC.
Signed-off-by: Felipe Balbi <felipe.balbi@microsoft.com>
Link: https://lore.kernel.org/r/20210417061951.2105530-2-balbi@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add YAML schemas documentation for Gen3 PCIe controller on
MediaTek SoCs.
Link: https://lore.kernel.org/r/20210420061723.989-2-jianjun.wang@mediatek.com
Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Ryder Lee <ryder.lee@mediatek.com>
|
|
Add device tree bindings for ethernet controller integrated into
IDT 79RC3243x SoCs.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Mention the required compatible string and base address for the
Integrated Endpoint Register Block node.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says:
====================
wireless-drivers-next patches for v5.13
Second set of patches for v5.13. A lot of iwlwifi and mt76 patches
this time, and also smaller features and fixes all over.
mt76
* mt7915/mt7615 decapsulation offload support
* threaded NAPI support
* new device IDs
* mt7921 device reset support
* rx timestamp support
iwlwifi
* passive scan support for 6GHz
* new hardware support
wilc1000
* CRC support for SPI bus
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
More Qualcomm DTS updates for 5.13
This adds CPUfreq, interconnect providers, IPC, remoteproc and IPA to
the SDX55 platform and then adds board files for the Telit FN980 TLB and
Thundercomm TurboX T55.
* tag 'qcom-dts-for-5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: sdx55: add IPA information
ARM: dts: qcom: sdx55: Add basic devicetree support for Thundercomm T55
dt-bindings: arm: qcom: Add binding for Thundercomm T55 kit
ARM: dts: qcom: sdx55: Add basic devicetree support for Telit FN980 TLB
dt-bindings: arm: qcom: Add binding for Telit FN980 TLB board
ARM: dts: qcom: sdx55: Add Modem remoteproc node
ARM: dts: qcom: Fix node name for NAND controller node
ARM: dts: qcom: sdx55: Add interconnect nodes
ARM: dts: qcom: sdx55: Add SCM node
dt-bindings: firmware: scm: Add compatible for SDX55
ARM: dts: qcom: sdx55: Add IMEM and PIL info region
ARM: dts: qcom: sdx55: Add modem SMP2P node
ARM: dts: qcom: sdx55: Add CPUFreq support
ARM: dts: qcom: sdx55: Add support for APCS block
ARM: dts: qcom: sdx55: Add support for A7 PLL clock
Link: https://lore.kernel.org/r/20210419150956.860423-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add a compatible for the M5Stack UnitV2 that is based on the
SigmaStar SSD202D (inifinity2m).
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Link: https://lore.kernel.org/r/20210417011015.2105280-3-daniel@0x0f.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
M5Stack make various modules for STEM, Makers, IoT.
Their UnitV2 is based on a SigmaStar SSD202D SoC which
we already have some minimal support for so add a
prefix in preparation for UnitV2 board support.
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Link: https://m5stack.com/
Link: https://lore.kernel.org/r/20210417011015.2105280-2-daniel@0x0f.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Convert the ti,secure-proxy to yaml for better checks and documentation.
Differences being mostly in the examples:
- Dropped the example usage of mailbox client, it is better done in
tisci node definition.
- Switched reg usage for address-cells and size-cells 1 - aligned with
schema checks as well.
- included header in example for a buildable example.
While at this, lets make sure to support upto 100 rx threads even though
typically upto 1 threads is practically in use.
NOTE: The following checkpatch warning is generated since we do include the header
in the example, but this is a false positive warning.
WARNING: DT binding docs and includes should be a separate patch. See:
Documentation/devicetree/bindings/submitting-patches.rst
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
- keep the ZC code, drop the code related to reinit
net/bridge/netfilter/ebtables.c
- fix build after move to net_generic
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mt76 patches for 5.13
* code cleanup
* mt7915/mt7615 decap offload support
* driver fixes
* mt7613 eeprom support
* MCU code unification
* threaded NAPI support
* new device IDs
* mt7921 device reset support
* rx timestamp support
# gpg: Signature made Tue 13 Apr 2021 12:11:25 AM EEST using DSA key ID 02A76EF5
# gpg: Good signature from "Felix Fietkau <nbd@nbd.name>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 75D1 1A7D 91A7 710F 4900 42EF D77D 141D 02A7 6EF5
|
|
Add a new optional firmware-name property to the IPA DT node. It
is used only if the modem is not doing early initialization (i.e.,
if the modem-init property is not present). Its value is the name
of the firmware file to use; if it's not specified, a default name
("ipa_fws.mdt") is used.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add binding doc for qcom pm8xxx rtc device.
Signed-off-by: satya priya <skakit@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/1617976766-7852-5-git-send-email-skakit@codeaurora.org
|
|
This reverts commit e61c589587c772c5f672b22683c3e0b38be20702.
The binding document has lots of schema errors and there's been no
effort to fix them, so let's remove it.
Cc: Argus Lin <argus.lin@mediatek.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: alsa-devel@alsa-project.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mediatek@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210416180118.3662904-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
'unisoc', 'x86/vt-d', 'x86/amd' and 'core' into next
|
|
Add optional brcm,ccode-map property to support translation from ISO3166
country code to brcmfmac firmware country code and revision.
The country revision is needed because the RF parameters that provide
regulatory compliance are tweaked per platform/customer. So depending
on the RF path tight to the chip, certain country revision needs to be
specified. As such they could be seen as device specific calibration
data which is a good fit into device tree.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://lore.kernel.org/r/20210415104728.8471-2-shawn.guo@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next
MTD core:
* Handle possible -EPROBE_DEFER from parse_mtd_partitions()
NAND core:
* Fix error handling in nand_prog_page_op() (x2)
* Add a helper to retrieve the number of ECC bytes per step
* Add a helper to retrieve the number of ECC steps
* Let ECC engines advertize the exact number of steps
* ECC Hamming:
- Populate the public nsteps field
- Use the public nsteps field
* ECC BCH:
- Populate the public nsteps field
- Use the public nsteps field
Raw NAND core:
* Add support for secure regions in NAND memory
* Try not to use the ECC private structures
* Remove duplicate include in rawnand.h
* BBT:
- Skip bad blocks when searching for the BBT in NAND
Raw NAND controller drivers:
* Qcom:
- Convert bindings to YAML
- Use dma_mapping_error() for error check
- Add missing nand_cleanup() in error path
- Return actual error code instead of -ENODEV
- Update last code word register
- Add helper to configure location register
- Rename parameter name in macro
- Add helper to check last code word
- Convert nandc to chip in Read/Write helper
- Update register macro name for 0x2c offset
* GPMI:
- Fix a double free in gpmi_nand_init
* Rockchip:
- Use flexible-array member instead of zero-length array
* Atmel:
- Update ecc_stats.corrected counter
* MXC:
- Remove unneeded of_match_ptr()
* R852:
- replace spin_lock_irqsave by spin_lock in hard IRQ
* Brcmnand:
- Move to polling in pio mode on oops write
- Read/write oob during EDU transfer
- Fix OOB R/W with Hamming ECC
* FSMC:
- Fix error code in fsmc_nand_probe()
* OMAP:
- Use ECC information from the generic structures
SPI-NAND core:
* Add missing MODULE_DEVICE_TABLE()
SPI-NAND drivers:
* gigadevice: Support GD5F1GQ5UExxG
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi into spi-5.13
|
|
Add tsens bindings for sm8350.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210324124308.1265626-1-robert.foss@linaro.org
|
|
Add the compatible for MDM9607.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210319220802.198215-1-konrad.dybcio@somainline.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next
Georgi writes:
interconnect changes for 5.13
These are the interconnect changes for the 5.13-rc1 merge window
with the highlights being drivers for two new platforms.
Driver changes:
- New driver for SM8350 platforms.
- New driver for SDM660 platforms.
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
interconnect: qcom: sm8350: Add missing link between nodes
interconnect: qcom: sm8350: Use the correct ids
interconnect: qcom: sdm660: Fix kerneldoc warning
MAINTAINERS: icc: add interconnect tree
interconnect: qcom: Add SM8350 interconnect provider driver
dt-bindings: interconnect: Add Qualcomm SM8350 DT bindings
interconnect: qcom: icc-rpm: record slave RPM id in error log
interconnect: qcom: Add SDM660 interconnect provider driver
dt-bindings: interconnect: Add bindings for Qualcomm SDM660 NoC
|
|
These correspond to the existing lpc_address, sirq, and sirq_polarity
sysfs attributes; the second element of aspeed,lpc-interrupts provides
a replacement for the deprecated aspeed,sirq-polarity-sense property.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Link: https://lore.kernel.org/r/20210412034712.16778-5-zev@bewilderbeest.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This property ties SIRQ polarity to SCU register bits that don't
necessarily have any direct relationship to it; the only use of it was
removed in commit c82bf6e133d3 ("ARM: aspeed: g5: Do not set sirq
polarity").
Reviewed-by: Joel Stanley <joel@jms.id.au>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Link: https://lore.kernel.org/r/20210412034712.16778-2-zev@bewilderbeest.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert pm8xxx bindings from .txt to .yaml format. Also,
split this binding into two: parent binding(qcom-pm8xxx.yaml)
and child node RTC binding(qcom-pm8xxx-rtc.yaml).
Signed-off-by: satya priya <skakit@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Add compatible string for pmk8350 rtc support.
Signed-off-by: satya priya <skakit@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Document the LP8756x-Q1 and LP87524-Q1 ICs reset pin.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Convert the RN5T618 binding to DT schema format. Also
clearly state which regulators are available.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Immutable branch between MFD and Watchdog due for the v5.13 merge window
|
|
'ib-mfd-input-v5.13-1', 'ib-mfd-platform-x86-v5.13', 'ib-mfd-power-v5.13', 'ib-mfd-pwm-rtc-v5.13-1' and 'ib-regulator-list-ramp-helpers-v5.13' into ibs-for-mfd-merged
Immutable branch between MFD, Clock, GPIO, Regulator and RTC due for the v5.13 merge window
Immutable branch between MFD and Extcon due for the v5.13 merge window
Immutable branch between MFD and Input due for the v5.13 merge window
Immutable branch between MFD and Platform/x86 due for the v5.13 merge window
Immutable branch between MFD and Power due for the v5.13 merge window
Immutable branch between MFD, PWM and RTC due for the v5.13 merge window
|
|
Add the "detach" mailbox item, that allows to define a mailbox to
send a IPCC signal to the remote processor on remoteproc detach action.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210331073347.8293-2-arnaud.pouliquen@foss.st.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Add an interrupt which is EINT usually to support runtime PM,
meanwhile add "interrupt-names" property, for backward
compatibility, it's optional and used when wakeup interrupt
exists
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1618031406-15347-2-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add RK3568/RK3566 SoC support to pinctrl.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210410204500.18091-1-ezequiel@collabora.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Document DT bindings for ROHM BD71815.
BD71815 is a single-chip power management IC mainly for battery-powered
portable devices. The IC integrates 5 bucks, 7 LDOs, a boost driver for
LED, a battery charger with a Coulomb counter, a real-time clock, a 32kHz
clock and two general-purpose outputs although only one is documented by
the data-sheet.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Add binding documentation for regulators on ROHM BD71815 PMIC.
5 bucks, 7 LDOs and a boost for LED.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
The BD71828 allows configuring the clk32kout pin mode to CMOS or
open-drain. Add device-tree property for specifying the preferred mode.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Add devicetree binding for Thundercomm T55 Dev kit based on SDX55.
Acked-by: Rob Herring <robh@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210408170457.91409-13-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Add devicetree binding for Telit FN980 TLB board based on SDX55.
Acked-by: Rob Herring <robh@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210408170457.91409-11-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Add devicetree binding for SDX55 remoteproc.
Acked-by: Rob Herring <robh@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210408170457.91409-15-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
This adds device tree bindings for the Hycon HY46XX touchscreen series.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210413144446.2277817-3-giulio.benetti@benettiengineering.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|