Age | Commit message (Collapse) | Author | Files | Lines |
|
Add bindings for the wave5 chips&media codec driver
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
|
|
StarFive SoCs like the jh7110 use display system based on verisilicon IP, use hdmi
base on innosilicon IP. Add bindings for them.
Signed-off-by: Shengyang Chen <shengyang.chen@starfivetech.com>
|
|
Add YAML devicetree binding for IMX708 CMOS image sensor.
Let's also add a MAINTAINERS entry for the binding and driver.
Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
|
|
Add the bindings documentation for Starfive JH7110 Camera Subsystem
which is used for handing image sensor data.
Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Signed-off-by: Jack Zhu <jack.zhu@starfivetech.com>
|
|
Add tink_ft5406.
Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
|
|
Add documentation to describe StarFive CAN engine.
Signed-off-by: William Qiu <william.qiu@starfivetech.com>
|
|
Add bindings for the PWM-DAC controller on the JH7110
RISC-V SoC by StarFive Ltd.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Link: https://lore.kernel.org/r/20230814080618.10036-2-hal.feng@starfivetech.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add StarFive JH7110 SoC PCIe controller dt-bindings. JH7110 using PLDA
XpressRICH PCIe host controller IP.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
|
|
Add PLDA XpressRICH PCIe host common properties dt-binding doc.
PolarFire PCIe host using PLDA IP. Move common properties from Microchip
PolarFire PCIe host to PLDA files.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Tested-by: John Clark <inindev@gmail.com>
|
|
Add bindings for OpenCores PWM Controller.
Signed-off-by: William Qiu <william.qiu@starfivetech.com>
Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
Due to the change of tuning implementation, it's no longer necessary to
use the "starfive,sysreg" property in dts, so remove it from required.
Signed-off-by: William Qiu <william.qiu@starfivetech.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Link: https://lore.kernel.org/r/20230922062834.39212-2-william.qiu@starfivetech.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add bindings for the timer on the JH7110 RISC-V SoC
by StarFive Technology Ltd.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
|
|
commit 6fb8c20a04be234cf1cfd4bdd8cfb8860c9d2d3b upstream.
Add dt-bindings for coe-unsupported property per tx queue. Some DWMAC
IPs support tx checksum offloading(coe) only for a few tx queues.
DW xGMAC IP can be synthesized such that it can support tx coe only
for a few initial tx queues. Also as Serge pointed out, for the DW
QoS IP tx coe can be individually configured for each tx queue. This
property is added to have sw fallback for checksum calculation if a
tx queue doesn't support tx coe.
Signed-off-by: Rohan G Thomas <rohan.g.thomas@intel.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 314c020c4ed3de72b15603eb6892250bc4b51702 ]
Node address doesn't match reg property which is not correct.
Fixes: ba96b2e7974b ("dt-bindings: gpio: gpio-xilinx: Convert Xilinx axi gpio binding to YAML")
Signed-off-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 21a1d02579ae75fd45555b84d20ba55632a14a19 upstream.
Fix the path to bindings header in description.
Fixes: e1c4c5436b4a ("dt-bindings: phy: qcom,qmp-usb3-dp: fix sc8280xp binding")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231218130553.45893-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
interface
[ Upstream commit 25bf28b25a2afa1864b7143259443160d9163ea0 ]
The bus-type belongs to the endpoint's properties and should therefore
be moved.
Link: https://lore.kernel.org/r/20231115164407.99876-1-mehdi.djait@bootlin.com
Fixes: 6a0eaa25bf36 ("media: dt-bindings: media: rkisp1: Add port for parallel interface")
Signed-off-by: Mehdi Djait <mehdi.djait@bootlin.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
names
[ Upstream commit f5f185bf7c42f6ca885202fefc40fc871d08a722 ]
The DMA-related nodes RDMA/WROT in MDP3 should be changed to generic names.
In addition, fix improper space indent in example.
Fixes: 4ad7b39623ab ("media: dt-binding: mediatek: add bindings for MediaTek MDP3 components")
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3c3fcac8d3b1b0f242845c3b3c3263bd38b3b92f ]
This link got broken by commit e790a4ce5290 ("arm: docs: Move Arm
documentation to Documentation/arch/") when the doc moved from arm/ to
arch/arm/. Fix the link so that it can continue to be followed.
Fixes: e790a4ce5290 ("arm: docs: Move Arm documentation to Documentation/arch/")
Cc: Alexandre TORGUE <alexandre.torgue@foss.st.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Jonathan Corbet <corbet@lwn.net>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20231129030443.2753833-1-swboyd@chromium.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit a2a8aefecbd0f87d6127951cef33b3def8439057 upstream.
Both imx23.dtsi and imx28.dtsi describe the OCOTP nodes in
the format:
compatible = "fsl,imx28-ocotp", "fsl,ocotp";
Document the "fsl,ocotp" entry to fix the following schema
warning:
efuse@8002c000: compatible: ['fsl,imx23-ocotp', 'fsl,ocotp'] is too long
from schema $id: http://devicetree.org/schemas/nvmem/mxs-ocotp.yaml#
Fixes: 2c504460f502 ("dt-bindings: nvmem: Convert MXS OCOTP to json-schema")
Cc: <Stable@vger.kernel.org>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20231215111358.316727-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit c0a2755aced969e0125fd68ccd95269b28d8913a ]
MPM provides a single genpd. Allow #power-domain-cells = <0>.
Fixes: 54fc9851c0e0 ("dt-bindings: interrupt-controller: Add Qualcomm MPM support")
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231129-topic-mpmbindingspd-v2-1-acbe909ceee1@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit d0c930b745cafde8e7d25d0356c648bca669556a upstream.
The USB5744 has two power supplies one for 3V3 and one for 1V2. Add the
second supply to the USB5744 DT binding.
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20231113145921.30104-2-francesco@dolcini.it
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b7a8f1f7a8a25e09aaefebb6251a77f44cda638b upstream.
As per R01UH0914EJ0130 Rev.1.30 HW manual the MTU3 overflow/underflow
interrupt names starts with 'tci' instead of 'tgi'.
Fix this documentation issue by replacing below overflow/underflow
interrupt names:
- tgiv0->tciv0
- tgiv1->tciv1
- tgiu1->tciu1
- tgiv2->tciv2
- tgiu2->tciu2
- tgiv3->tciv3
- tgiv4->tciv4
- tgiv6->tciv6
- tgiv7->tciv7
- tgiv8->tciv8
- tgiu8->tciu8
Fixes: 0a9d6b54297e ("dt-bindings: timer: Document RZ/G2L MTU3a bindings")
Cc: stable@kernel.org
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230727081848.100834-2-biju.das.jz@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 42851dfd4dbe38e34724a00063a9fad5cfc48dcd ]
The regular expression pattern for matching serial node children should
accept only nodes starting and ending with the set of words: bluetooth,
gnss, gps or mcu. Add missing brackets to enforce such matching.
Fixes: 0c559bc8abfb ("dt-bindings: serial: restrict possible child node names")
Reported-by: Andreas Kemnade <andreas@kemnade.info>
Closes: https://lore.kernel.org/all/20231004170021.36b32465@aktux/
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231005093247.128166-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c20b59b2996c89c4f072c3312e6210528a298330 ]
The EUSB2 repeater requires some alterations to its init sequence,
depending on board design.
Add support for making the necessary changes to that sequence to make USB
functional on SM8550-based Xperia 1 V.
They all have lackluster description due to lack of information.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230830-topic-eusb2_override-v2-1-7d8c893d93f6@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 61fdd1f1d2c183ec256527d16d75e75c3582af82 ]
The MT6366 PMIC is mostly, but not fully, compatible with MT6358. It has
a different set of regulators. Specifically, it lacks the camera related
VCAM* LDOs and VLDO28, but has additional VM18, VMDDR, and VSRAM_CORE LDOs.
The PMICs contain a chip ID register that can be used to detect which
exact model is preset, so it is possible to share a common base
compatible string.
Add a separate compatible for the MT6366 PMIC, with a fallback to the
MT6358 PMIC.
Fixes: 49be16305587 ("dt-bindings: mfd: Add compatible for the MediaTek MT6366 PMIC")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230928085537.3246669-2-wenst@chromium.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 0c01b20fb50ba63c03841aa83070dc59c3b1b02f upstream.
Add rs485-rts-active-high property, this is a legacy property
used by 8250_omap.
This fixes the following make dt_binding_check warning:
Documentation/devicetree/bindings/serial/8250_omap.yaml:
rs485-rts-active-high: missing type definition
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/all/CAMuHMdUkPiA=o_QLyuwsTYW7y1ksCjHAqyNSHFx2QZ-dP-HGsQ@mail.gmail.com/
Fixes: 403e97d6ab2c ("dt-bindings: serial: 8250_omap: add rs485-rts-active-high")
Cc: stable <stable@kernel.org>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231019154834.41721-1-francesco@dolcini.it
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some very small driver fixes for 6.6-final that have shown up
in the past two weeks. Included in here are:
- tiny fastrpc bugfixes for reported errors
- nvmem register fixes
- iio driver fixes for some reported problems
- fpga test fix
- MAINTAINERS file update for fpga
All of these have been in linux-next this week with no reported
problems"
* tag 'char-misc-6.6-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
fpga: Fix memory leak for fpga_region_test_class_find()
fpga: m10bmc-sec: Change contact for secure update driver
fpga: disable KUnit test suites when module support is enabled
iio: afe: rescale: Accept only offset channels
nvmem: imx: correct nregs for i.MX6ULL
nvmem: imx: correct nregs for i.MX6UL
nvmem: imx: correct nregs for i.MX6SLL
misc: fastrpc: Unmap only if buffer is unmapped from DSP
misc: fastrpc: Clean buffers on remote invocation failures
misc: fastrpc: Free DMA handles for RPC calls with no arguments
misc: fastrpc: Reset metadata buffer to avoid incorrect free
iio: exynos-adc: request second interupt only when touchscreen mode is used
iio: adc: xilinx-xadc: Correct temperature offset/scale for UltraScale
iio: adc: xilinx-xadc: Don't clobber preset voltage/temperature thresholds
dt-bindings: iio: add missing reset-gpios constrain
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy fixes from Vinod Koul:
- mapphone-mdm6600 runtime pm & pinctrl handling fixes
- Qualcomm qmp usb pcs register fixes, qmp pcie register size warning
fix, m31 fixes for wrong pointer in PTR_ERR and dropping wrong vreg
check, qmp combo fix for 8550 power config register
- realtek usb fix for debugfs_create_dir() and kconfig dependency
* tag 'phy-fixes-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: realtek: Realtek PHYs should depend on ARCH_REALTEK
phy: qualcomm: Fix typos in comments
phy: qcom-qmp-combo: initialize PCS_USB registers
phy: qcom-qmp-combo: Square out 8550 POWER_STATE_CONFIG1
phy: qcom: m31: Remove unwanted qphy->vreg is NULL check
phy: realtek: usb: Drop unnecessary error check for debugfs_create_dir()
phy: qcom: phy-qcom-m31: change m31_ipq5332_regs to static
phy: qcom: phy-qcom-m31: fix wrong pointer pass to PTR_ERR()
dt-bindings: phy: qcom,ipq8074-qmp-pcie: fix warning regarding reg size
phy: qcom-qmp-usb: split PCS_USB init table for sc8280xp and sa8775p
phy: qcom-qmp-usb: initialize PCS_USB registers
phy: mapphone-mdm6600: Fix pinctrl_pm handling for sleep pins
phy: mapphone-mdm6600: Fix runtime PM for remove
phy: mapphone-mdm6600: Fix runtime disable on probe
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus
Jonathan writes:
2nd set of IIO fixes for the 6.6 cycle.
Note, given timing my expectation is these will be queued for the
6.7 merge window but they could go quicker if the 6.6 cycle ends up
being extended.
afe:
* Allow for channels with offset but no scale. In this case the scale
can be assumed to be 1.
adi,ad74115:
* Add missing dt-binding constraint on number of reset-gpios.
samsung,exynos:
* Don't request touchscreen interrupt if it is not going to be used,
getting rid of an incorrect resulting warning message.
xilinx,xadc:
* Avoid changing preset voltage and themperature thresholds as they
are typicaly set as part of FPGA image building so should be left
alone.
* Fix wrong temperature offset and scale for some devices.
* tag 'iio-fixes-for-6.6b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: afe: rescale: Accept only offset channels
iio: exynos-adc: request second interupt only when touchscreen mode is used
iio: adc: xilinx-xadc: Correct temperature offset/scale for UltraScale
iio: adc: xilinx-xadc: Don't clobber preset voltage/temperature thresholds
dt-bindings: iio: add missing reset-gpios constrain
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Capture correct oemid-bits for eMMC cards
- Fix error propagation for some ioctl commands
- Hold retuning if SDIO is in 1-bit mode
MMC host:
- mtk-sd: Use readl_poll_timeout_atomic to not "schedule while atomic"
- sdhci-msm: Correct minimum number of clocks
- sdhci-pci-gli: Fix LPM negotiation so x86/S0ix SoCs can suspend
- sdhci-sprd: Fix error code in sdhci_sprd_tuning()"
* tag 'mmc-v6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: core: Capture correct oemid-bits for eMMC cards
mmc: mtk-sd: Use readl_poll_timeout_atomic in msdc_reset_hw
mmc: core: Fix error propagation for some ioctl commands
mmc: sdhci-sprd: Fix error code in sdhci_sprd_tuning()
mmc: sdhci-pci-gli: fix LPM negotiation so x86/S0ix SoCs can suspend
mmc: core: sdio: hold retuning if sdio in 1-bit mode
dt-bindings: mmc: sdhci-msm: correct minimum number of clocks
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Still higher volume than wished, but all are driver-specific small
fixes and look safe for this late RC.
The majority of changes are for ASoC, especially for wcd938x driver
and Cirrus codec drivers, while there are other random fixes including
usual HD-audio quirks"
* tag 'sound-6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (22 commits)
ASoC: da7219: Correct the process of setting up Gnd switch in AAD
ALSA: hda/realtek - Fixed ASUS platform headset Mic issue
ALSA: hda/realtek: Add quirk for ASUS ROG GU603ZV
ALSA: hda/relatek: Enable Mute LED on HP Laptop 15s-fq5xxx
ASoC: dwc: Fix non-DT instantiation
ASoC: codecs: tas2780: Fix log of failed reset via I2C.
ASoC: rt5650: fix the wrong result of key button
ASoC: cs42l42: Fix missing include of gpio/consumer.h
ASoC: cs42l43: Update values for bias sense
ASoC: dt-bindings: cirrus,cs42l43: Update values for bias sense
ASoC: cs35l56: ASP1 DOUT must default to Hi-Z when not transmitting
ASoC: pxa: fix a memory leak in probe()
ASoC: cs35l56: Fix illegal use of init_completion()
ASoC: codecs: wcd938x-sdw: fix runtime PM imbalance on probe errors
ASoC: codecs: wcd938x-sdw: fix use after free on driver unbind
ASoC: codecs: wcd938x: fix runtime PM imbalance on remove
ASoC: codecs: wcd938x: fix regulator leaks on probe errors
ASoC: codecs: wcd938x: fix resource leaks on bind errors
ASoC: codecs: wcd938x: fix unbind tear down order
ASoC: codecs: wcd938x: drop bogus bind error handling
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here is a small set of char/misc and other smaller driver subsystem
fixes for 6.6-rc6. Included in here are:
- lots of iio driver fixes
- binder memory leak fix
- mcb driver fixes
- counter driver fixes
- firmware loader documentation fix
- documentation update for embargoed hardware issues
All of these have been in linux-next for over a week with no reported
issues"
* tag 'char-misc-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (22 commits)
iio: pressure: ms5611: ms5611_prom_is_valid false negative bug
dt-bindings: iio: adc: adi,ad7292: Fix additionalProperties on channel nodes
iio: adc: ad7192: Correct reference voltage
iio: light: vcnl4000: Don't power on/off chip in config
iio: addac: Kconfig: update ad74413r selections
iio: pressure: dps310: Adjust Timeout Settings
iio: imu: bno055: Fix missing Kconfig dependencies
iio: adc: imx8qxp: Fix address for command buffer registers
iio: cros_ec: fix an use-after-free in cros_ec_sensors_push_data()
iio: irsd200: fix -Warray-bounds bug in irsd200_trigger_handler
dt-bindings: iio: rohm,bu27010: add missing vdd-supply to example
binder: fix memory leaks of spam and pending work
firmware_loader: Update contact emails for ABI docs
Documentation: embargoed-hardware-issues.rst: Clarify prenotifaction
mcb: remove is_added flag from mcb_device struct
coresight: tmc-etr: Disable warnings for allocation failures
coresight: Fix run time warnings while reusing ETR buffer
iio: admv1013: add mixer_vgate corner cases
iio: pressure: bmp280: Fix NULL pointer exception
iio: dac: ad3552r: Correct device IDs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
"Driver fixes for:
- stm32 dma residue calculation and chaining
- stm32 mdma for setting inflight bytes, residue calculation and
resume abort
- channel request, channel enable and dma error in fsl_edma
- runtime pm imbalance in ste_dma40 driver
- deadlock fix in mediatek driver"
* tag 'dmaengine-fix-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: fsl-edma: fix all channels requested when call fsl_edma3_xlate()
dmaengine: stm32-dma: fix residue in case of MDMA chaining
dmaengine: stm32-dma: fix stm32_dma_prep_slave_sg in case of MDMA chaining
dmaengine: stm32-mdma: set in_flight_bytes in case CRQA flag is set
dmaengine: stm32-mdma: use Link Address Register to compute residue
dmaengine: stm32-mdma: abort resume if no ongoing transfer
dmaengine: ste_dma40: Fix PM disable depth imbalance in d40_probe
dmaengine: mediatek: Fix deadlock caused by synchronize_irq()
dmaengine: idxd: use spin_lock_irqsave before wait_event_lock_irq
dmaengine: fsl-edma: fix edma4 channel enable failure on second attempt
dt-bindings: dmaengine: zynqmp_dma: add xlnx,bus-width required property
dmaengine: fsl-dma: fix DMA error when enabling sg if 'DONE' bit is set
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A set of updates for interrupt chip drivers:
- Fix the fail of the Qualcomm PDC driver on v3.2 hardware which is
caused by a control bit being moved to a different location
- Update the SM8150 device tree PDC resource so the version register
can be read
- Make the Renesas RZG2L driver correct for interrupts which are
outside of the LSB in the TSSR register by using the proper macro
for calculating the mask
- Document the Renesas RZ2GL device tree binding correctly and update
them for a few devices which faul to boot otherwise
- Use the proper accessor in the RZ2GL driver instead of blindly
dereferencing an unchecked pointer
- Make GICv3 handle the dma-non-coherent attribute correctly
- Ensure that all interrupt controller nodes on RISCV are marked as
initialized correctly
Maintainer changes:
- Add a new entry for GIC interrupt controllers and assign Marc
Zyngier as the maintainer
- Remove Marc Zyngier from the core and driver maintainer entries as
he is burried in work and short of time to handle that.
Thanks to Marc for all the great work he has done in the past couple
of years!
Also note that commit 5873d380f4c0 ("irqchip/qcom-pdc: Add support for
v3.2 HW") has a incorrect SOB chain.
The real author is Neil. His patch was posted by Dmitry once and Neil
picked it up from the list and reposted it with the bogus SOB chain.
Not a big deal, but worth to mention. I wanted to fix that up, but
then got distracted and Marc piled more changes on top. So I decided
to leave it as is instead of rebasing world"
* tag 'irq-urgent-2023-10-10-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
MAINTAINERS: Remove myself from the general IRQ subsystem maintenance
MAINTAINERS: Add myself as the ARM GIC maintainer
irqchip/renesas-rzg2l: Convert to irq_data_get_irq_chip_data()
irqchip/stm32-exti: add missing DT IRQ flag translation
irqchip/riscv-intc: Mark all INTC nodes as initialized
irqchip/gic-v3: Enable non-coherent redistributors/ITSes DT probing
irqchip/gic-v3-its: Split allocation from initialisation of its_node
dt-bindings: interrupt-controller: arm,gic-v3: Add dma-noncoherent property
dt-bindings: interrupt-controller: renesas,irqc: Add r8a779f0 support
dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Document RZ/G2UL SoC
irqchip: renesas-rzg2l: Fix logic to clear TINT interrupt source
dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Update description for '#interrupt-cells' property
arm64: dts: qcom: sm8150: extend the size of the PDC resource
irqchip/qcom-pdc: Add support for v3.2 HW
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of pending fixes since a couple of weeks ago, which
became slightly bigger than usual due to my vacation.
Most of changes are about ASoC device-specific fixes while USB- and
HD-audio received quirks as usual. All fixes, including two ASoC core
changes, are reasonably small and safe to apply"
* tag 'sound-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (23 commits)
ALSA: usb-audio: Fix microphone sound on Nexigo webcam.
ALSA: hda/realtek: Change model for Intel RVP board
ALSA: usb-audio: Fix microphone sound on Opencomm2 Headset
ALSA: hda: cs35l41: Cleanup and fix double free in firmware request
ASoC: dt-bindings: fsl,micfil: Document #sound-dai-cells
ASoC: amd: yc: Fix non-functional mic on Lenovo 82YM
ASoC: tlv320adc3xxx: BUG: Correct micbias setting
ASoC: rt5682: Fix regulator enable/disable sequence
ASoC: hdmi-codec: Fix broken channel map reporting
ASoC: core: Do not call link_exit() on uninitialized rtd objects
ASoC: core: Print component name when printing log
ASoC: SOF: amd: fix for firmware reload failure after playback
ASoC: fsl-asoc-card: use integer type for fll_id and pll_id
ASoC: fsl_sai: Don't disable bitclock for i.MX8MP
dt-bindings: ASoC: rockchip: Add compatible for RK3128 spdif
ASoC: soc-generic-dmaengine-pcm: Fix function name in comment
ALSA: hda/realtek - ALC287 merge RTK codec with CS CS35L41 AMP
ASoC: simple-card: fixup asoc_simple_probe() error handling
ASoC: simple-card-utils: fixup simple_util_startup() error handling
ASoC: Intel: sof_sdw: add support for SKU 0B14
...
|
|
The Documentation/devicetree/bindings/gpio/gpio-consumer-common.yaml
schema does not enforce number of reset GPIOs, thus each device binding
must do it.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231005083650.92222-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Due to an error in the datasheet the bias sense values currently don't
match the hardware. Whilst this is a change to the binding no devices
have yet shipped so updating the binding will not cause any issues.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231010102425.3662364-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Fix potential memory leak in of_changeset_action()
- Fix some i.MX binding warnings
- Fix typo in renesas,vin binding field-even-active property
- Fix andestech,ax45mp-cache example unit-address
- Add missing additionalProperties on RiscV CPU interrupt-controller
node
- Add missing unevaluatedProperties on media bindings
- Fix brcm,iproc-pcie binding 'msi' child node schema
- Fix MEMSIC MXC4005 compatible string
* tag 'devicetree-fixes-for-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: trivial-devices: Fix MEMSIC MXC4005 compatible string
dt-bindings: PCI: brcm,iproc-pcie: Fix 'msi' child node schema
dt-bindings: PCI: brcm,iproc-pcie: Drop common pci-bus properties
dt-bindings: PCI: brcm,iproc-pcie: Fix example indentation
media: dt-bindings: Add missing unevaluatedProperties on child node schemas
dt-bindings: bus: fsl,imx8qxp-pixel-link-msi-bus: Drop child 'reg' property
media: dt-bindings: imx7-csi: Make power-domains not required for imx8mq
dt-bindings: media: renesas,vin: Fix field-even-active spelling
dt-bindings: cache: andestech,ax45mp-cache: Fix unit address in example
of: overlay: Reorder struct fragment fields kerneldoc
dt-bindings: display: fsl,imx6-hdmi: Change to 'unevaluatedProperties: false'
dt-bindings: riscv: cpus: Add missing additionalProperties on interrupt-controller node
of: dynamic: Fix potential memory leak in of_changeset_action()
|
|
The GIC v3 specifications allow redistributors and ITSes interconnect
ports used to access memory to be wired up in a way that makes the
respective initiators/memory observers non-coherent.
Add the standard dma-noncoherent property to the GICv3 bindings to
allow firmware to describe the redistributors/ITSes components and
interconnect ports behaviour in system designs where the redistributors
and ITSes are not coherent with the CPU.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231006125929.48591-2-lpieralisi@kernel.org
|
|
Document support for the Interrupt Controller for External Devices
(INT-EX) in the Renesas R-Car S4-8 (R8A779F0) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/9467a1c67d5d240211f88336973fa968d39cc860.1690446928.git.geert+renesas@glider.be
|
|
Document RZ/G2UL (R9A07G043U) IRQC bindings. The IRQC block on RZ/G2UL SoC
is almost identical to one found on the RZ/G2L SoC the only difference
being it can support BUS_ERR_INT for which it has additional registers.
Hence new generic compatible string "renesas,r9a07g043u-irqc" is added
for RZ/G2UL SoC.
Now that we have additional interrupt for RZ/G2UL and RZ/Five SoC
interrupt-names property is added so that we can parse them based on
names.
While at it updated the example node to four spaces and added
interrupt-names property.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231006121058.13890-1-prabhakar.mahadev-lad.rj@bp.renesas.com
|
|
The correct name of this chip is MXC4005, not MX4005. This is confirmed
both by the manufacturer website and by the title of the original commit,
which added other MXCxxxx devices as well but only this one misses a "c" in
the compatible string.
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Fixes: d9bf5d37fd58 ("dt-bindings:trivial-devices: Add memsic,mxc4005/mxc6255/mxc6655 entries")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231004-mxc4005-device-tree-support-v1-1-e7c0faea72e4@bootlin.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
The 'msi' child node schema is missing constraints on additional properties.
It turns out it is incomplete and properties for it are documented in the
parent node by mistake. Move the reference to msi-controller.yaml and
the custom properties to the 'msi' node. Adding 'unevaluatedProperties'
ensures all the properties in the 'msi' node are documented.
With the schema corrected, a minimal interrupt controller node is needed
to properly decode the interrupt properties since the example has
multiple interrupt parents.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Fixes: 905b986d099c ("dt-bindings: pci: Convert iProc PCIe to YAML")
Link: https://lore.kernel.org/r/20230926155613.33904-3-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Drop the unnecessary listing of properties already defined in
pci-bus.yaml. Unless there are additional constraints, it is not
necessary.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20230926155351.31117-2-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
The example's indentation is off. While fixing this, the 'bus' node
is unnecessary and can be dropped. It is also preferred to split up
unrelated examples to their own entries.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230926155351.31117-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Just as unevaluatedProperties or additionalProperties are required at
the top level of schemas, they should (and will) also be required for
child node schemas. That ensures only documented properties are
present for any node.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230925212803.1976803-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
A bus schema based on simple-pm-bus shouldn't define how many 'reg' entries
a child device has. That is a property of the device. Drop the 'reg' entry.
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230925212639.1975002-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
On i.MX8MQ the MIPI CSI block does have an associated power-domain, but
the CSI bridge does not.
Remove the power-domains requirement from the i.MX8MQ CSI bridge
to fix the following schema warning:
imx8mq-librem5-r4.dtb: csi@30a90000: 'power-domains' is a required property
from schema $id: http://devicetree.org/schemas/media/nxp,imx7-csi.yaml#
Fixes: de655386845a ("media: dt-bindings: media: imx7-csi: Document i.MX8M power-domains property")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20231004201105.2323758-1-festevam@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus
Jonathan writes:
1st set of IIO fixes for 6.6
Note last minute rebase to fix up a stale Fixes tag. All patches have been
in Linux-next for some time.
adi,ad3552r
- Fix swapped device IDs for the two parts that are supported.
adi,ad7192
- Use the right reference voltage source.
adi,ad7292
- Fix additionalProperties to be false, not true.
adi,ad74413
- Add missing Kconfig depends on IIO_BUFFER and IIO_TRIGGERED_BUFFER
adi,admv1013
- Fix up some corner cases for the mixer vgate register value.
bosch,bmp280
- Fix a null pointer dereference caused by a wrong boolean operator.
bosch,bno055
- Add missing Kconfig depends on IIO_BUFFER and IIO_TRIGGERED_BUFFER
freescale,imx8eqxp
- Fix some wrong register addresses.
google,cros_ec
- Fix a use after free if very badly timed buffer disable occurs by
holding the device in buffered mode.
infineon,dps310
- Expand a timeout so we don't hit it on working parts.
meas,m5611
- Allow for a ROM CRC of 0 as it is a valid value and there are devices
out there where it happens.
murata,irsd200
- Make sure the buffer used to build up the scan is large enough to take
the timestamp.
rohm,bu27010 binding
- Add a missing required vdd-supply
vishay,vcnl4000
- Don't power down chip in wrong place.
* tag 'iio-fixes-for-6.6a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: pressure: ms5611: ms5611_prom_is_valid false negative bug
dt-bindings: iio: adc: adi,ad7292: Fix additionalProperties on channel nodes
iio: adc: ad7192: Correct reference voltage
iio: light: vcnl4000: Don't power on/off chip in config
iio: addac: Kconfig: update ad74413r selections
iio: pressure: dps310: Adjust Timeout Settings
iio: imu: bno055: Fix missing Kconfig dependencies
iio: adc: imx8qxp: Fix address for command buffer registers
iio: cros_ec: fix an use-after-free in cros_ec_sensors_push_data()
iio: irsd200: fix -Warray-bounds bug in irsd200_trigger_handler
dt-bindings: iio: rohm,bu27010: add missing vdd-supply to example
iio: admv1013: add mixer_vgate corner cases
iio: pressure: bmp280: Fix NULL pointer exception
iio: dac: ad3552r: Correct device IDs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD fixes from Lee Jones:
"A couple of small fixes:
- Potential build failure in CS42L43
- Device Tree bindings clean-up for a superseded patch"
* tag 'mfd-fixes-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
dt-bindings: mfd: Revert "dt-bindings: mfd: maxim,max77693: Add USB connector"
mfd: cs42l43: Fix MFD_CS42L43 dependency on REGMAP_IRQ
|