summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/power
AgeCommit message (Collapse)AuthorFilesLines
2023-09-30dt-bindings: power: supply: sbs-manager: Add missing unevaluatedProperties ↵Rob Herring1-0/+6
on child node schemas Just as unevaluatedProperties or additionalProperties are required at the top level of schemas, they should (and will) also be required for child node schemas. That ensures only documented properties are present for any node. Add unevaluatedProperties as needed, and then add any missing properties flagged by the addition. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230926164446.101327-1-robh@kernel.org Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2023-09-27dt-bindings: power: qcom,rpmpd: Add SM7150Danila Tikhonov1-0/+1
Add a compatible for SM7150 platforms. Signed-off-by: Danila Tikhonov <danila@jiaxyga.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230916175952.178611-2-danila@jiaxyga.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-09-21dt-bindings: power: Clarify performance capabilities of power-domainsUlf Hansson1-8/+9
The power-domains bindings has in many years been used to describe so called performance-domains too. Rather than using a separate binding it has been convenient to re-use the power-domain bindings, as in some cases it's in fact a combination of the both that would be the best description. Therefore, let's make it more clear that the power-domains bindings can be used to describe a performance-domain too. Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Kevin Hilman <khilman@kernel.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org> Cc: Conor Dooley <conor+dt@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230825112633.236607-11-ulf.hansson@linaro.org Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2023-09-18dt-bindings: power: supply: Drop deprecated ab8500-batterySebastian Reichel1-34/+0
Linus Walleij modified AB8500 to use the generic simple-battery and samsung,battery bindings. This is an unused leftover that can be removed. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230917190124.1012316-1-sebastian.reichel@collabora.com Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2023-09-15dt-bindings: power: supply: Add pm8916 LBCNikita Travkin1-0/+128
Qualcomm Linear Battery Charger is a CC/CV charger block in PM8916 PMIC. Document it's DT binding. Signed-off-by: Nikita Travkin <nikita@trvn.ru> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230915-pm8916-bms-lbc-v3-2-f30881e951a0@trvn.ru Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2023-09-15dt-bindings: power: supply: Add pm8916 VM-BMSNikita Travkin1-0/+83
Qualcomm Voltage Mode BMS is a battery monitoring block in PM8916 PMIC. Document it's DT binding. Signed-off-by: Nikita Travkin <nikita@trvn.ru> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230915-pm8916-bms-lbc-v3-1-f30881e951a0@trvn.ru Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2023-09-15dt-bindings: power: supply: Document Mitsumi MM8013 fuel gaugeKonrad Dybcio1-0/+38
The Mitsumi MM8013 is an I2C fuel gauge for Li-Ion cells. The partial datasheet is available at [1]. Add bindings for this chip. [1] https://www.mitsumi.co.jp/latest-M/Catalog/pdf/battery_mm_8013_e.pdf Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230621-topic-mm8013-v4-2-975aecd173ed@linaro.org Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2023-09-14dt-bindings: power: supply: maxim,max17040: add temperature supportSvyatoslav Ryhel1-0/+31
Add temperature monitoring support. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Iskren Chernev <me@iskren.info> Link: https://lore.kernel.org/r/20230731073613.10394-2-clamor95@gmail.com Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2023-09-12dt-bindings: power: syscon-poweroff: get regmap from parent nodeKrzysztof Kozlowski1-3/+7
Just like syscon-reboot device, the syscon-poweroff is supposed to be a child of syscon node, thus we can take the same approach as syscon-poweroff: deprecate the 'regmap' field in favor of taking it from the parent's node. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230901120057.47018-1-krzysztof.kozlowski@linaro.org Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2023-09-11dt-bindings: power: add Amlogic T7 power domainsxianwei.zhao1-1/+2
Add devicetree binding document and related header file for Amlogic T7 secure power domains. Signed-off-by: xianwei.zhao <xianwei.zhao@amlogic.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Tested-by: Lucas Tanure <tanure@linux.com> Link: https://lore.kernel.org/r/20230911025223.3433776-5-xianwei.zhao@amlogic.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-08-31Merge tag 'devicetree-for-6.6' of ↵Linus Torvalds7-40/+6
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: "DT core: - Add support for generating DT nodes for PCI devices. This is the groundwork for applying overlays to PCI devices containing non-discoverable downstream devices. - DT unittest additions to check reverted changesets, to test for refcount issues, and to test unresolved symbols. Also, various clean-ups of the unittest along the way. - Refactor node and property manipulation functions to better share code with old API and changeset API - Refactor changeset print functions to a common implementation - Move some platform_device specific functions into of_platform.c Bindings: - Treewide fixing of typos - Treewide clean-up of SPDX tags to use 'OR' consistently - Last chunk of dropping unnecessary quotes. With that, the check for unnecessary quotes is enabled in yamllint. - Convert ftgmac100, zynqmp-genpd, pps-gpio, syna,rmi4, and qcom,ssbi bindings to DT schema format - Add Allwinner V3s xHCI USB, Saef SF-TC154B display, QCom SM8450 Inline Crypto Engine, QCom SM6115 UFS, QCom SDM670 PDC interrupt controller, Arm 2022 Cortex cores, and QCom IPQ9574 Crypto bindings - Fixes for Rockchip DWC PCI binding - Ensure all properties are evaluated on USB connector schema - Fix dt-check-compatible script to find of_device_id instances with compiler annotations" * tag 'devicetree-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (64 commits) dt-bindings: usb: Add V3s compatible string for OHCI dt-bindings: usb: Add V3s compatible string for EHCI dt-bindings: display: panel: mipi-dbi-spi: add Saef SF-TC154B dt-bindings: vendor-prefixes: document Saef Technology dt-bindings: thermal: lmh: update maintainer address of: unittest: Fix of_unittest_pci_node() kconfig dependencies dt-bindings: crypto: ice: Document sm8450 inline crypto engine dt-bindings: ufs: qcom: Add ICE to sm8450 example dt-bindings: ufs: qcom: Add sm6115 binding dt-bindings: ufs: qcom: Add reg-names property for ICE dt-bindings: yamllint: Enable quoted string check dt-bindings: Drop remaining unneeded quotes of: unittest-data: Fix whitespace - angular brackets of: unittest-data: Fix whitespace - indentation of: unittest-data: Fix whitespace - blank lines of: unittest-data: Convert remaining overlay DTS files to sugar syntax of: overlay: unittest: Add test for unresolved symbol of: unittest: Add separators to of_unittest_overlay_high_level() of: unittest: Cleanup partially-applied overlays of: unittest: Merge of_unittest_apply{,_revert}_overlay_check() ...
2023-08-23dt-bindings: use capital "OR" for multiple licenses in SPDXKrzysztof Kozlowski4-4/+4
Documentation/process/license-rules.rst and checkpatch expect the SPDX identifier syntax for multiple licenses to use capital "OR". Correct it to keep consistent format and avoid copy-paste issues. Correct also the format // -> .* in few Allwinner binding headers as pointed out by checkpatch: WARNING: Improper SPDX comment style for 'include/dt-bindings/reset/sun50i-h6-ccu.h', please use '/*' instead Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20230823084540.112602-1-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org>
2023-08-22Merge tag 'qcom-drivers-for-6.6' of ↵Arnd Bergmann1-0/+1
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers Qualcomm driver updates for v6.6 Compatible and clock handling in the Qualcomm SCM driver is cleaned up, together with a couple stylistic cleanups and transition to mark exported symbols GPL only. An abstraction for the RPM subsystem is introduced, to make align the structure of the SMD and GLINK nodes thereof with the structure when a remoteproc is involved. This is done to facilitate associating additional entities with the RPM subsystem. The qmp_send() API is modified to not expose hardware requirements onto the client drivers, and then further extended to allow command formatting directly in the API, to facilitate this typical use case. In the Qualcomm Command DB driver, NUL characters previously included in identifiers are dropped from the debugfs, to facilitate scripting. The thresholds of the BWMON driver are simplified to avoid hard coded starting values. The OCMEM driver is updated with some cleanups and fixes, and addition of MSM8226 support. PMIC_GLINK gains support for retimer switches, safe mode is selected when the cable is disconnected from altmode and the same is enabled for SM8550. An off-by-one string length check is corrected in the QMI encoder decoder library. The RPMh tracepoints are extended to include the state of the request, to provide needed context in the traced events. The series from Ulf creating a genpd framework is integrated, to facilitate the other changes to the cpr, rpmpd and rpmhpd driver. SDX75 support is added to the rpmhpd driver, and the rpmpd driver is extended with the same sync_state logic found in the rpmhpd driver. The socinfo driver gains knowledge about SM4450 and SM7125, the IPQ5019 platform is dropped. Clock handling in the GSBI driver is cleaned up with the use of devm_clk_get_enabled(). The list of VMIDs defined for the SCM assign memory interface is extended. * tag 'qcom-drivers-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (52 commits) soc: qcom: aoss: Tidy up qmp_send() callers soc: qcom: aoss: Format string in qmp_send() soc: qcom: aoss: Move length requirements from caller dt-bindings: firmware: qcom: scm: Updating VMID list dt-bindings: qcom: Update RPMHPD entries for some SoCs soc: qcom: qmi_encdec: Restrict string length in decode soc: qcom: smem: Fix incompatible types in comparison soc: qcom: ocmem: add missing clk_disable_unprepare() in ocmem_dev_probe() soc: qcom: socinfo: Add SoC ID for SM7125 dt-bindings: arm: qcom,ids: Add SoC ID for SM7125 dt-bindings: arm: qcom,ids: drop the IPQ5019 SoC ID soc: qcom: socinfo: drop the IPQ5019 SoC ID soc: qcom: socinfo: add SM4450 ID dt-bindings: arm: qcom,ids: add SoC ID for SM4450 soc: qcom: pmic_glink: enable altmode for SM8550 soc: qcom: pmic_glink_altmode: add retimer-switch support soc: qcom: pmic_glink_altmode: handle safe mode when disconnect soc: qcom: rpmhpd: Add SDX75 power domains dt-bindings: power: qcom,rpmpd: Add compatible for sdx75 genpd: Makefile: build imx ... Link: https://lore.kernel.org/r/20230818023338.2484467-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-08-18dt-bindings: Fix typosBjorn Helgaas2-2/+2
Fix typos in Documentation/devicetree/bindings. The changes are in descriptions or comments where they shouldn't affect functionality. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20230814212822.193684-3-helgaas@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2023-08-18dt-bindings: power: xilinx: merge zynqmp-genpd.txt with firmware bindingNaman Trivedi Manojbhai1-34/+0
Remove the zynqmp-genpd.txt binding. Add the power-domain-cells property from the zynqmp-genpd.txt binding to firmware binding. Signed-off-by: Naman Trivedi Manojbhai <naman.trivedimanojbhai@amd.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230816130309.1338446-1-naman.trivedimanojbhai@amd.com Signed-off-by: Rob Herring <robh@kernel.org>
2023-08-01dt-bindings: power: qcom,rpmpd: Add compatible for sdx75Rohit Agarwal1-0/+1
Add a compatible string for power domains in sdx75. Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/1690803007-8640-2-git-send-email-quic_rohiagar@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-07-31dt-bindings: power: add Amlogic C3 power domainsXianwei Zhao1-1/+2
Add devicetree binding document and related header file for Amlogic C3 secure power domains. Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230707003710.2667989-3-xianwei.zhao@amlogic.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-07-26dt-bindings: arm: msm: kpss-acc: Revert "dt-bindings: arm: msm: kpss-acc: ↵Krzysztof Kozlowski1-1/+0
Make the optional reg truly optional" This reverts commit 981be238e1d28e156aa9da2a8722f86f02fd0453 because it was totally bogus and duplicated existing minItems: ruamel.yaml.constructor.DuplicateKeyError: while constructing a mapping Documentation/devicetree/bindings/power/qcom,kpss-acc-v2.yaml: ignoring, error parsing file Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230724090109.19489-1-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-07-24dt-bindings: arm: msm: kpss-acc: Make the optional reg truly optionalKonrad Dybcio1-0/+1
The description of reg[1] says that register is optional. Adjust minItems to make it truly optional. Fixes: 4260ddfb6496 ("dt-bindings: arm: msm: Convert and split kpss-acc driver Documentation to yaml") Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230627-topic-more_bindings-v1-9-6b4b6cd081e5@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-07-04Merge tag 'for-v6.5' of ↵Linus Torvalds8-27/+368
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: - Add new Qualcomm PMI8998/PM660 SMB2 charger - bq256xx: support systems without thermistors - cros_pchg: fix peripheral device status after system resume - axp20x_usb_power: add support for AXP192 - qcom-pon: add support for pm8941 - at91-reset: prepare to expose reset reason to sysfs - switch all I2C drivers back to use .probe instead of .probe_new - convert some more DT bindings to YAML - misc cleanups * tag 'for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (28 commits) MAINTAINERS: add documentation file for Microchip SAMA5D2 shutdown controller dt-bindings: power: reset: atmel,sama5d2-shdwc: convert to yaml dt-bindings: power: reset: atmel,at91sam9260-shdwc: convert to yaml power: reset: at91-reset: change the power on reason prototype power: reset: qcom-pon: add support for pm8941-pon dt-bindings: power: reset: qcom-pon: define pm8941-pon power: supply: add Qualcomm PMI8998 SMB2 Charger driver dt-bindings: power: supply: qcom,pmi8998-charger: add bindings for smb2 driver power: supply: rt9467: Make charger-enable control as logic level power: supply: Switch i2c drivers back to use .probe() power: reset: add HAS_IOPORT dependencies dt-bindings: power: supply: axp20x: Add AXP192 compatible power: supply: axp20x_usb_power: Add support for AXP192 power: supply: axp20x_usb_power: Remove variant IDs from VBUS polling check power: supply: axp20x_usb_power: Use regmap field for VBUS disabling power: supply: axp20x_usb_power: Use regmap fields for USB BC feature power: supply: axp20x_usb_power: Use regmap fields for VBUS monitor feature power: supply: axp20x_usb_power: Simplify USB current limit handling power: supply: hwmon: constify pointers to hwmon_channel_info power: supply: twl4030_madc_battery: Refactor twl4030_madc_bat_ext_changed() ...
2023-07-03Merge tag 'mfd-next-6.5' of ↵Linus Torvalds2-1/+66
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Add support for TI TPS6594/TPS6593/LP8764 PMICs - Add support for Samsung RT5033 Battery Charger - Add support for Analog Devices MAX77540 and MAX77541 PMICs New Device Support: - Add support for SPI to Rockchip RK808 (and friends) - Add support for AXP192 PMIC to X-Powers AXP20X - Add support for AXP313a PMIC to X-Powers AXP20X - Add support for RK806 to Rockchip RK8XX Removed Device Support: - Removed MFD support for Richtek RT5033 Battery Fix-ups: - Remove superfluous code - Switch I2C drivers from .probe_new() to .probe() - Convert over to managed resources (devm_*(), etc) - Use dev_err_probe() for returning errors from .probe() - Add lots of Device Tree bindings / support - Improve cache efficiency by switching to Maple - Use own exported namespaces (NS) - Include missing and remove superfluous headers - Start using / convert to the new shutdown sys-off API - Trivial: variable / define renaming - Make use of of_property_read_reg() when requesting DT 'reg's Bug Fixes: - Fix chip revision readout due to incorrect data masking - Amend incorrect register and mask values used for charger state - Hide unused functionality at compile time - Fix resource leaks following error handling routines - Return correct error values and fix error handling in general - Repair incorrect device names - used for device matching - Remedy broken module auto-loading" * tag 'mfd-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (51 commits) dt-bindings: mfd: max77541: Add ADI MAX77541/MAX77540 iio: adc: max77541: Add ADI MAX77541 ADC Support regulator: max77541: Add ADI MAX77541/MAX77540 Regulator Support dt-bindings: regulator: max77541: Add ADI MAX77541/MAX77540 Regulator mfd: Switch two more drivers back to use struct i2c_driver::probe dt-bindings: mfd: samsung,s5m8767: Simplify excluding properties mfd: stmpe: Only disable the regulators if they are enabled mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support dt-bindings: mfd: gateworks-gsc: Remove unnecessary fan-controller nodes mfd: core: Use of_property_read_reg() to parse "reg" mfd: stmfx: Nullify stmfx->vdd in case of error mfd: stmfx: Fix error path in stmfx_chip_init mfd: intel-lpss: Add missing check for platform_get_resource mfd: stpmic1: Add PMIC poweroff via sys-off handler mfd: stpmic1: Fixup main control register and bits naming dt-bindings: mfd: qcom,tcsr: Add the compatible for IPQ8074 mfd: tps65219: Add support for soft shutdown via sys-off API mfd: pm8008: Drop bogus i2c module alias mfd: pm8008: Fix module autoloading mfd: tps65219: Add GPIO cell instance ...
2023-06-30Merge tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds3-15/+32
Pull ARM SoC devicetree updates from Arnd Bergmann: "The biggest change this time is for the 32-bit devicetree files, which are all moved to a new location, using separate subdirectories for each SoC vendor, following the same scheme that is used on arm64, mips and riscv. This has been discussed for many years, but so far we never did this as there was a plan to move the files out of the kernel entirely, which has never happened. The impact of this will be that all external patches no longer apply, and anything depending on the location of the dtb files in the build directory will have to change. The installed files after 'make dtbs_install' keep the current location. There are six added SoCs here that are largely variants of previously added chips. Two other chips are added in a separate branch along with their device drivers. - The Samsung Exynos 4212 makes its return after the Samsung Galaxy Express phone is addded at last. The SoC support was originally added in 2012 but removed again in 2017 as it was unused at the time. - Amlogic C3 is a Cortex-A35 based smart IP camera chip - Qualcomm MSM8939 (Snapdragon 615) is a more featureful variant of the still common MSM8916 (Snapdragon 410) phone chip that has been supported for a long time. - Qualcomm SC8180x (Snapdragon 8cx) is one of their earlier high-end laptop chips, used in the Lenovo Flex 5G, which is added along with the reference board. - Qualcomm SDX75 is the latest generation modem chip that is used as a peripherial in phones but can also run a standalone Linux. Unlike the prior 32-bit SDX65 and SDX55, this now has a 64-bit Cortex-A55. - Alibaba T-Head TH1520 is a quad-core RISC-V chip based on the Xuantie C910 core, a step up from all previously added rv64 chips. All of the above come with reference board implementations, those included there are 39 new board files, but only five more 32-bit this time, probably a new low: - Marantec Maveo board based on dhcor imx6ull module - Endian 4i Edge 200, based on the armv5 Marvell Kirkwood chip - Epson Moverio BT-200 AR glasses based on TI OMAP4 - PHYTEC STM32MP1-3 Dev board based on STM32MP15 PHYTEC SOM - ICnova ADB4006 board based on Allwinner A20 On the 64-bit side, there are also fewer addded machines than we had in the recent releases: - Three boards based on NXP i.MX8: Emtop SoM & Baseboard, NXP i.MX8MM EVKB board and i.MX8MP based Gateworks Venice gw7905-2x device. - NVIDIA IGX Orin and Jetson Orin Nano boards, both based on tegra234 - Qualcomm gains support for 6 reference boards on various members of their IPQ networking SoC series, as well as the Sony Xperia M4 Aqua phone, the Acer Aspire 1 laptop, and the Fxtec Pro1X board on top of the various reference platforms for their new chips. - Rockchips support for several newer boards: Indiedroid Nova (rk3588), Edgeble Neural Compute Module 6B (rk3588), FriendlyARM NanoPi R2C Plus (rk3328), Anbernic RG353PS (rk3566), Lunzn Fastrhino R66S/R68S (rk3568) - TI K3/AM625 based PHYTEC phyBOARD-Lyra-AM625 board and Toradex Verdin family with AM62 COM, carrier and dev boards Other changes to existing boards contain the usual minor improvements along with - continued updates to clean up dts files based on dtc warnings and binding checks, in particular cache properties and node names - support for devicetree overlays on at91, bcm283x - significant additions to existing SoC support on mediatek, qualcomm, ti k3 family, starfive jh71xx, NXP i.MX6 and i.MX8, ST STM32MP1 As usual, a lot more detail is available in the individual merge commits" * tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (926 commits) ARM: mvebu: fix unit address on armada-390-db flash ARM: dts: Move .dts files to vendor sub-directories kbuild: Support flat DTBs install ARM: dts: Add .dts files missing from the build ARM: dts: allwinner: Use quoted #include ARM: dts: lan966x: kontron-d10: add PHY interrupts ARM: dts: lan966x: kontron-d10: fix SPI CS ARM: dts: lan966x: kontron-d10: fix board reset ARM: dts: at91: Enable device-tree overlay support for AT91 boards arm: dts: Enable device-tree overlay support for AT91 boards arm64: dts: exynos: Remove clock from Exynos850 pmu_system_controller ARM: dts: at91: use generic name for shutdown controller ARM: dts: BCM5301X: Add cells sizes to PCIe nodes dt-bindings: firmware: brcm,kona-smc: convert to YAML riscv: dts: sort makefile entries by directory riscv: defconfig: enable T-HEAD SoC MAINTAINERS: add entry for T-HEAD RISC-V SoC riscv: dts: thead: add sipeed Lichee Pi 4A board device tree riscv: dts: add initial T-HEAD TH1520 SoC device tree riscv: Add the T-HEAD SoC family Kconfig option ...
2023-06-30Merge tag 'devicetree-for-6.5' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: "Bindings: - Add some missing type definitions to properties - Drop unneeded quotes and use absolute paths in bindings - Remove redundant "binding" or "schema" in binding titles - Add bindings for Ralink SoCs interrupt controller, QCA2066 Bluetooth, infineon,irps5401, new NXP i.MX GPT variants, shineworld lh133k MIPI SPI panel, Socionext Synquacer platforms, RK3588 PCIe, ST M95640 EEPROM, and FSL DCP crypto variants, and Arm Cortex-R52 DT core: - Improve the reserved-memory range allocation to maximize contiguous space - Use device_set_node() helper in place of open coding" * tag 'devicetree-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (40 commits) dt-bindings: interrupt-controller: add Ralink SoCs interrupt controller dt-bindings: PCI: dwc: rockchip: Update for RK3588 dt-bindings: auxdisplay: holtek: Add missing type for "linux,no-autorepeat" dt-bindings: input: mediatek,pmic-keys: Fix typo in "linux,keycodes" property name dt-bindings: pwm: drop unneeded quotes dt-bindings: crypto: drop unneeded quotes dt-bindings: arm: socionext: add Synquacer platforms dt-bindings: connector: usb: allow a single HS port dt-bindings: bus: ti-sysc: fix typo of: reserved_mem: Use stable allocation order of: reserved_mem: Try to keep range allocations contiguous dt-bindings: arm: drop unneeded quotes and use absolute /schemas path dt-bindings: firmware: arm,scmi: drop unneeded quotes and use absolute /schemas path dt-bindings: dvfs: drop unneeded quotes dt-bindings: gpu: drop unneeded quotes dt-bindings: i3c: silvaco,i3c-master: drop unneeded quotes dt-bindings: rockchip: grf: drop unneeded quotes dt-bindings: spmi: mtk,spmi-mtk-pmif: drop unneeded quotes dt-bindings: Remove last usage of "binding" or "schema" in titles dt-bindings: display: panel: mipi-dbi-spi: add spi-3wire property ...
2023-06-21Merge tag 'arm-soc/for-6.5/devicetree' of ↵Arnd Bergmann2-14/+31
https://github.com/Broadcom/stblinux into soc/dt This pull request contains Broadcom ARM-based SoCs Device Tree changes for 6.5, please pull the following: - Krzysztof adds missing cache properties for the BCM63xx DSL routers - Rafal relicenses a number of the BCM5301X DTS files to the GPL 2.0+ / MIT license, and he fixes a number of Device Tree nodes warnings, adds MAC address for all Luxul routers and adds Netgear R8000 Wi-Fi regulatory information to the DTS - Stanislav updates the "BCM mobile" SoCs DTS files to fix various warnings - Aurelien enables the BCM283x DTS files to be built with relocation information to make them usable with DT overlays - Christian fixes the Meraki DTS to have correct NAND ECC properties, correct partition numbers and fixed-link node(s) properties * tag 'arm-soc/for-6.5/devicetree' of https://github.com/Broadcom/stblinux: (33 commits) ARM: dts: BCM5301X: Add cells sizes to PCIe nodes dt-bindings: firmware: brcm,kona-smc: convert to YAML ARM: dts: BCM5301X: Add Netgear R8000 WiFi regulator mappings dt-bindings: net: wireless: brcm,bcm4329-fmac: allow generic properties dt-bindings: net: wireless: brcm,bcm4329-fmac: add BCM4366 binding ARM: dts: BCM5301X: fix duplex-full => full-duplex ARM: dts: BCM5301X: MR32: remove partition index numbers ARM: dts: BCM5301X: MR26: MR32: remove bogus nand-ecc-algo property dt-bindings: power: reset: bcm21664-resetmgr: convert to YAML ARM: dts: bcm21664-garnet: use node labels ARM: dts: bcm11351/21664: add UART, I2C node labels ARM: dts: bcm-mobile: move status properties to the end of nodes ARM: dts: bcm21664/23550: use CCU compatibles directly ARM: dts: bcm-mobile: change "" includes to <> where applicable ARM: dts: BCM5301X: Describe switch ports in the main DTS ARM: dts: BCM5301X: Relicense Christian's code to the GPL 2.0+ / MIT ARM: dts: BCM5301X: Drop invalid properties from Meraki MR32 keys ARM: dts: BCM5301X: Drop invalid #usb-cells dt-bindings: arm: bcm: Add bindings for Buffalo WZR-1166DHP(2) ARM: dts: BCM5301X: Use updated "spi-gpio" binding properties ... Link: https://lore.kernel.org/r/20230619134920.3384844-1-florian.fainelli@broadcom.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-20dt-bindings: power: reset: atmel,sama5d2-shdwc: convert to yamlClaudiu Beznea1-0/+114
Convert Microchip AT91 SAMA5D2 shutdown controller to YAML. SAMA7G5 SHDWC DT node (available in arch/arm/boot/dts/sama7g5.dtsi) has syscon along with its compatible. There is no usage of this syscon in the current code but it may be necessary in future as some registers of SHDWC are accessed in different drivers (at91-sama5d2_shdwc.c and arch/arm/mach-at91/pm.c). Thus update the YAML with it to make DT checkers happy. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2023-06-20dt-bindings: power: reset: atmel,at91sam9260-shdwc: convert to yamlClaudiu Beznea1-0/+82
Convert Microchip AT91 shutdown controller to YAML. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2023-06-16dt-bindings: Remove last usage of "binding" or "schema" in titlesRob Herring1-1/+1
The Devicetree bindings document does not have to say in the title that it is a "Devicetree binding", but instead just describe the hardware. Most of these have been fixed already, so fix the handful that snuck in. With this, a meta-schema check can be enabled to catch these automatically. Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Suman Anna <s-anna@ti.com> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Sebastian Reichel <sre@kernel.org> Link: https://lore.kernel.org/r/20230615213154.1753313-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2023-06-09dt-bindings: power: reset: qcom-pon: define pm8941-ponDmitry Baryshkov1-0/+16
On PM8941 pon doesn't store the reset reason. However we still need the wrapping node for pwrkey and resin nodes. Add bindings for pm8941-pon device. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2023-06-09dt-bindings: power: supply: qcom,pmi8998-charger: add bindings for smb2 driverCaleb Connolly1-0/+82
Add devicetree bindings for the Qualcomm PMI8998/PM660 SMB2 charger driver. Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2023-06-09dt-bindings: power: reset: bcm21664-resetmgr: convert to YAMLStanislav Jakubek2-14/+31
Convert Broadcom Kona family reset manager bindings to DT schema. Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20230527141222.GA5048@standask-GA-A55M-S2HP Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
2023-06-08dt-bindings: Add rt5033 MFD, Regulator and ChargerJakob Hauser1-0/+65
Add device tree binding documentation for rt5033 multifunction device, voltage regulator and battery charger. Signed-off-by: Jakob Hauser <jahau@rocketmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/bff139976865c2a489ab62333d78c4e3179a8eae.1684182964.git.jahau@rocketmail.com
2023-06-08dt-bindings: power: supply: rt5033-battery: Apply unevaluatedPropertiesJakob Hauser1-1/+1
Additionally to the already available ref "power-supply.yaml", replace "additionalProperties: false" by "unevaluatedProperties: false". Otherwise, when referencing rt5033-battery in an example, message "'power-supplies' does not match any of the regexes: 'pinctrl-[0-9]+'" will be returned. Signed-off-by: Jakob Hauser <jahau@rocketmail.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/ef86067348f01a3bbf1bd9b4f81716b62ea1f552.1684182964.git.jahau@rocketmail.com
2023-06-05dt-bindings: xilinx: Switch xilinx.com emails to amd.comMichal Simek1-1/+1
@xilinx.com is still working but better to switch to new amd.com after AMD/Xilinx acquisition. Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Damien Le Moal <dlemoal@kernel.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/f5b2bd1e78407e4128fc8f0b5874ba723e710a88.1684245058.git.michal.simek@amd.com
2023-05-25dt-bindings: power: qcom,rpmpd: Add SA8155PKonrad Dybcio1-0/+1
Add a compatible for SA8155P platforms and relevant defines to the include file. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Tested-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230411-topic-hanaau-v2-1-fd3d70844b31@linaro.org
2023-05-16dt-bindings: power: supply: axp20x: Add AXP192 compatibleAidan MacDonald1-0/+1
The AXP192 is most similar to the AXP202, but the current limits are different and the USB OTG status register has a different address (0x04 instead of 0x02). Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2023-05-08dt-bindings: power: reset: convert nvmem-reboot-mode bindings to YAMLBartosz Golaszewski2-26/+52
Convert the DT binding document for nvmem-reboot-mode from .txt to YAML. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2023-05-08dt-bindings: power: reset: qcom-pon: Only allow reboot-mode pre-pmk8350Konrad Dybcio1-1/+3
As pointed out by Shazad [1], PMICs using a separate HLOS+PBS scheme (so PMK8350 and newer) are expected to pass reboot mode data through SDAM, as the reboot mode registers are absent in the HLOS reg space. Limit the reboot-mode.yaml inclusion to PMICs without a separate PBS region. [1] https://lore.kernel.org/linux-arm-msm/12f13183-c381-25f7-459e-62e0c2b19498@quicinc.com/ Fixes: 03fccdc76dce ("dt-bindings: power: reset: qcom-pon: Add new compatible "qcom,pmk8350-pon"") Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2023-05-08dt-bindings: power: supply: bq256xx: Add ti,no-thermistor propertyHermes Zhang1-0/+18
Add a new property ti,no-thermistor to indicate that no thermistor is connected to the TS pin of the chip. Signed-off-by: Hermes Zhang <chenhuiz@axis.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2023-04-30Merge tag 'for-v6.4' of ↵Linus Torvalds1-0/+70
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: - power-supply core support for automatic handling of constant battery data supplied by firmware - generic-adc-battery: major cleanup - axp288_charger: fix ACPI issues on x86 Android tablets - rk817: cleanup and fix handling for low state of charge * tag 'for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (26 commits) power: supply: rk817: Fix low SOC bugs power: supply: rk817: Drop unneeded debugging code power: supply: axp288_charger: Use alt usb-id extcon on some x86 android tablets power: supply: generic-adc-battery: style fixes power: supply: generic-adc-battery: improve error message power: supply: generic-adc-battery: update copyright info power: supply: generic-adc-battery: add DT support power: supply: generic-adc-battery: add temperature support power: supply: generic-adc-battery: simplify read_channel logic power: supply: generic-adc-battery: use simple-battery API power: supply: generic-adc-battery: drop memory alloc error message power: supply: generic-adc-battery: drop charge now support power: supply: generic-adc-battery: drop jitter delay support power: supply: generic-adc-battery: fix unit scaling power: supply: generic-adc-battery: convert to managed resources power: supply: core: auto-exposure of simple-battery data dt-bindings: power: supply: adc-battery: add binding power: supply: bq256xx: Support to disable charger power: supply: charger-manager: Use of_property_read_bool() for boolean properties power: reset: qcom-pon: drop of_match_ptr for ID table ...
2023-04-30Merge tag 'clk-for-linus' of ↵Linus Torvalds1-0/+42
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "Nothing looks out of the ordinary in this batch of clk driver updates. There are a couple patches to the core clk framework, but they're all basically cleanups or debugging aids. The driver updates and new additions are dominated in the diffstat by Qualcomm and MediaTek drivers. Qualcomm gained a handful of new drivers for various SoCs, and MediaTek gained a bunch of drivers for MT8188. The MediaTek drivers are being modernized as well, so there are updates all over that vendor's clk drivers. There's also a couple other new clk drivers in here, for example the Starfive JH7110 SoC support is added. Outside of the two major SoC vendors though, we have the usual collection of non-critical fixes and cleanups to various clk drivers. It's good to see that we're getting more cleanups and modernization patches. Maybe one day we'll be able to properly split clk providers from clk consumers. Core: - Print an informational message before disabling unused clks New Drivers: - BCM63268 timer clock and reset controller - Frequency Hopping (FHCTL) on MediaTek MT6795, MT8173, MT8192 and MT8195 SoCs - Mediatek MT8188 SoC clk drivers - Clock driver for Sunplus SP7021 SoC - Clk driver support for Loongson-2 SoCs - Clock driver for Skyworks Si521xx I2C PCIe clock generators - Initial Starfive JH7110 clk/reset support - Global clock controller drivers for Qualcomm SM7150, IPQ9574, MSM8917 and IPQ5332 SoCs - GPU clock controller drivers for SM6115, SM6125, SM6375 and SA8775P SoCs Updates: - Shrink size of clk_fractional_divider a little - Convert various clk drivers to devm_of_clk_add_hw_provider() - Convert platform clk drivers to remove_new() - Converted most Mediatek clock drivers to struct platform_driver - MediaTek clock drivers can be built as modules - Reimplement Loongson-1 clk driver with DT support - Migrate socfpga clk driver to of_clk_add_hw_provider() - Support for i3c clks on Aspeed ast2600 SoCs - Add clock generic devm_clk_hw_register_gate_parent_data - Add audiomix block control for i.MX8MP - Add support for determine_rate to i.MX composite-8m - Let the LCDIF Pixel clock of i.MX8MM and i.MX8MN set parent rate - Provide clock name in error message for clk-gpr-mux on get parent failure - Drop duplicate imx_clk_mux_flags macro - Register the i.MX8MP Media Disp2 Pix clock as bus clock - Add Media LDB root clock to i.MX8MP - Make i.MX8MP nand_usdhc_bus clock as non-critical - Fix the rate table for i.MX fracn-gppll - Disable HW control for the fracn-gppll in order to be controlled by register write - Add support for interger PLL in fracn-gppll - Add mcore_booted module parameter to i.MX93 provider - Add NIC, A55 and ARM PLL clocks to i.MX93 - Fix i.MX8ULP XBAR_DIVBUS and AD_SLOW clock parents - Use "divider closest" clock type for PLL4_PFD dividers on i.MX8ULP to get more accurate clock rates - Mark the MU0_Bi and TPM5 clocks on i.MX8ULP as critical - Update some of the i.MX critical clocks flags to allow glitchless on-the-fly rate change. - Add I2C5 clock on Renesas R-Car V3H - Exynos850: Add CMU_G3D clock controller for the Mali GPU - Extract Exynos5433 (ARM64) clock controller power management code to common driver parts - Exynos850: make PMU_ALIVE_PCLK clock critical - Add Audio, thermal, camera (CSI-2), Image Signal Processor/Channel Selector (ISPCS), and video capture (VIN) clocks on Renesas R-Car V4H - Add video capture (VIN) clocks on Renesas R-Car V3H - Add Cortex-A53 System CPU (Z2) clocks on Renesas R-Car V3M and V3H - Support for Stromer Plus PLL on Qualcomm IPQ5332 - Add a missing reset to Qualcomm QCM2290 - Migrate Qualcomm IPQ4019 to clk_parent_data - Make USB GDSCs enter retention state when disabled on Qualcomm SM6375, MSM8996 and MSM8998 SoCs - Set floor rounding clk_ops for Qualcomm QCM2290 SDCC2 clk - Add two EMAC GDSCs on Qualcomm SC8280XP - Use shared rcg clk ops in Qualcomm SM6115 GCC - Park Qualcomm SM8350 PCIe PIPE clks when disabled - Add GDSCs to Qualcomm SC7280 LPASS audio clock controller - Add missing XO clocks to Qualcomm MSM8226 and MSM8974 - Convert some Qualcomm clk DT bindings to YAML - Reparenting fix for the clock supplying camera modules on Rockchip rk3399 - Mark more critical (bus-)clocks on Rockchip rk3588" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (290 commits) clk: qcom: gcc-sc8280xp: Add EMAC GDSCs clk: starfive: Delete the redundant dev_set_drvdata() in JH7110 clock drivers clk: rockchip: rk3588: make gate linked clocks critical clk: qcom: dispcc-qcm2290: Remove inexistent DSI1PHY clk clk: qcom: add the GPUCC driver for sa8775p dt-bindings: clock: qcom: describe the GPUCC clock for SA8775P clk: qcom: gcc-sm8350: fix PCIe PIPE clocks handling clk: qcom: lpassaudiocc-sc7280: Add required gdsc power domain clks in lpass_cc_sc7280_desc clk: qcom: lpasscc-sc7280: Skip qdsp6ss clock registration dt-bindings: clock: qcom,sc7280-lpasscc: Add qcom,adsp-pil-mode property clk: starfive: Avoid casting iomem pointers clk: microchip: fix potential UAF in auxdev release callback clk: qcom: rpm: Use managed `of_clk_add_hw_provider()` clk: mediatek: fhctl: Mark local variables static clk: sifive: make SiFive clk drivers depend on ARCH_ symbols clk: uniphier: Use managed `of_clk_add_hw_provider()` clk: si5351: Use managed `of_clk_add_hw_provider()` clk: si570: Use managed `of_clk_add_hw_provider()` clk: si514: Use managed `of_clk_add_hw_provider()` clk: lmk04832: Use managed `of_clk_add_hw_provider()` ...
2023-04-27Merge tag 'devicetree-for-6.4-1' of ↵Linus Torvalds15-23/+25
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: "Bindings: - Convert Qcom IOMMU, Amlogic timer, Freescale sec-v4.0, Toshiba TC358764 display bridge, Parade PS8622 display bridge, and Xilinx FPGA bindings to DT schema format - Add qdu1000 and sa8775p SoC support to Qcom PDC interrupt controller - Add MediaTek MT8365 UART and SYSIRQ bindings - Add Arm Cortex-A78C and X1C core compatibles - Add vendor prefix for Novatek - Remove bindings for stih415, sti416, stid127 platforms - Drop uneeded quotes in schema files. This is preparation for yamllint checking quoting for us. - Add missing (unevaluated|additional)Properties constraints on child node schemas - Clean-up schema comments formatting - Fix I2C and SPI node bus names in schema examples - Clean-up some display compatibles schema syntax - Fix incorrect references to lvds.yaml - Gather all cache controller bindings in a common directory DT core: - Convert unittest to new void .remove platform device hook - kerneldoc fixes for DT address of_pci_range_to_resource/ of_address_to_resource functions" * tag 'devicetree-for-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (46 commits) dt-bindings: rng: Drop unneeded quotes dt-bindings: arm/soc: mediatek: Drop unneeded quotes dt-bindings: soc: qcom: Drop unneeded quotes dt-bindings: i2c: samsung: Fix 'deprecated' value dt-bindings: display: Fix lvds.yaml references dt-bindings: display: simplify compatibles syntax dt-bindings: display: mediatek: simplify compatibles syntax dt-bindings: drm/bridge: ti-sn65dsi86: Fix the video-interfaces.yaml references dt-bindings: timer: Drop unneeded quotes dt-bindings: interrupt-controller: qcom,pdc: document qcom,qdu1000-pdc dt-bindings: interrupt-controller: qcom-pdc: add compatible for sa8775p dt-bindings: reset: remove stih415/stih416 reset dt-bindings: net: dwmac: sti: remove stih415/sti416/stid127 dt-bindings: irqchip: sti: remove stih415/stih416 and stid127 dt-bindings: iommu: Convert QCOM IOMMU to YAML dt-bindings: irqchip: ti,sci-inta: Add optional power-domains property dt-bindings: Add missing (unevaluated|additional)Properties on child node schemas of: address: Reshuffle to remove forward declarations of: address: Fix documented return value of of_pci_range_to_resource() of: address: Document return value of of_address_to_resource() ...
2023-04-05dt-bindings: Add missing (unevaluated|additional)Properties on child node ↵Rob Herring1-0/+1
schemas Just as unevaluatedProperties or additionalProperties are required at the top level of schemas, they should (and will) also be required for child node schemas. That ensures only documented properties are present. Add unevaluatedProperties or additionalProperties as appropriate, and then add any missing properties flagged by the addition. Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Lee Jones <lee@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230124230228.372305-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2023-03-28dt-bindings: power: apple,pmgr-pwrstate: Add t8112 compatibleHector Martin1-0/+1
Add the apple,t8112-pmgr-pwrstate compatible for the Apple M2 SoC. This goes after t8103. The sort order logic here is having SoC numeric code families in release order, and SoCs within each family in release order: - t8xxx (Apple HxxP/G series, "phone"/"tablet" chips) - t8103 (Apple H13G/M1) - t8112 (Apple H14G/M2) - t6xxx (Apple HxxJ series, "desktop" chips) - t6000 (Apple H13J(S)/M1 Pro) - t6001 (Apple H13J(C)/M1 Max) - t6002 (Apple H13J(D)/M1 Ultra) Note that t600[0-2] share the t6000 compatible where the hardware is 100% compatible, which is usually the case in this highly related set of SoCs. Reviewed-by: Janne Grunau <j@jannau.net> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Janne Grunau <j@jannau.net> Signed-off-by: Hector Martin <marcan@marcan.st>
2023-03-20dt-bindings: power: supply: adc-battery: add bindingSebastian Reichel1-0/+70
Add binding for a battery that is only monitored via ADC channels and simple status GPIOs. Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2023-03-16dt-bindings: arm: msm: Convert and split kpss-acc driver Documentation to yamlChristian Marangi1-0/+42
Convert kpss-acc driver Documentation to yaml. The original Documentation was wrong all along. Fix it while we are converting it. The example was wrong as kpss-acc-v2 should only expose the regs but we don't have any driver that expose additional clocks. The kpss-acc driver is only specific to v1. For this exact reason, split the Documentation to 2 different schema, v1 as clock-controller and v2 for power-manager as per msm-3.10 specification, the exposed regs handle power manager. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230116204751.23045-3-ansuelsmth@gmail.com
2023-03-08dt-bindings: Fix SPI and I2C bus node names in examplesRob Herring15-23/+24
SPI and I2C bus node names are expected to be "spi" or "i2c", respectively, with nothing else, a unit-address, or a '-N' index. A pattern of 'spi0' or 'i2c0' or similar has crept in. Fix all these cases. Mostly scripted with the following commands: git grep -l '\si2c[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/i2c[0-9] {/i2c {/' git grep -l '\sspi[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/spi[0-9] {/spi {/' With this, a few errors in examples were exposed and fixed. Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for the microchip,mcp251xfd.yaml Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for power-supply Acked-by: Wolfram Sang <wsa@kernel.org> Acked-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230228215433.3944508-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2023-03-04Merge tag 'for-v6.3-part2' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull more power supply updates from Sebastian Reichel: - Fix DT binding for Richtek RT9467 - Fix a NULL pointer check in the power-supply core - Document meaning of absent "present" property * tag 'for-v6.3-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: dt-bindings: power: supply: Revise Richtek RT9467 compatible name ABI: testing: sysfs-class-power: Document absence of "present" property power: supply: fix null pointer check order in __power_supply_register
2023-02-27Merge tag 'soc-drivers-6.3' of ↵Linus Torvalds5-3/+104
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "As usual, there are lots of minor driver changes across SoC platforms from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung. These usually add support for additional chip variations in existing drivers, but also add features or bugfixes. The SCMI firmware subsystem gains a unified raw userspace interface through debugfs, which can be used for validation purposes. Newly added drivers include: - New power management drivers for StarFive JH7110, Allwinner D1 and Renesas RZ/V2M - A driver for Qualcomm battery and power supply status - A SoC device driver for identifying Nuvoton WPCM450 chips - A regulator coupler driver for Mediatek MT81xxv" * tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits) power: supply: Introduce Qualcomm PMIC GLINK power supply soc: apple: rtkit: Do not copy the reg state structure to the stack soc: sunxi: SUN20I_PPU should depend on PM memory: renesas-rpc-if: Remove redundant division of dummy soc: qcom: socinfo: Add IDs for IPQ5332 and its variant dt-bindings: arm: qcom,ids: Add IDs for IPQ5332 and its variant dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1 firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/ MAINTAINERS: Update qcom CPR maintainer entry dt-bindings: firmware: document Qualcomm SM8550 SCM dt-bindings: firmware: qcom,scm: add qcom,scm-sa8775p compatible soc: qcom: socinfo: Add Soc IDs for IPQ8064 and variants dt-bindings: arm: qcom,ids: Add Soc IDs for IPQ8064 and variants soc: qcom: socinfo: Add support for new field in revision 17 soc: qcom: smd-rpm: Add IPQ9574 compatible soc: qcom: pmic_glink: remove redundant calculation of svid soc: qcom: stats: Populate all subsystem debugfs files dt-bindings: soc: qcom,rpmh-rsc: Update to allow for generic nodes soc: qcom: pmic_glink: add CONFIG_NET/CONFIG_OF dependencies soc: qcom: pmic_glink: Introduce altmode support ...
2023-02-25Merge tag 'for-v6.3' of ↵Linus Torvalds4-5/+174
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: "Nothing special for the power-supply subystem this time. - power-supply core: remove faulty cooling logic - convert all sysfs show() handlers from *printf() use sysfs_emit() - bq25890: add dual-charger support required by Lenovo Yoga Tab 3 Pro - bq27xxx: fix reporting critical level - syscon-reboot: add priority property support - new rt9467 charger driver - new rt9471 charger driver - new Odroid Go Ultra poweroff driver - misc minor fixes and cleanups" * tag 'for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (32 commits) power: reset: odroid-go-ultra: fix I2C dependency power: supply: leds: explicitly include linux/leds.h dt-bindings: power: supply: pm8941-coincell: Don't require charging properties dt-bindings: power: supply: pm8941-coincell: Add PM8998 compatible power: reset: add Odroid Go Ultra poweroff driver power: supply: rt9467: Fix spelling mistake "attache" -> "attach" power: supply: rt9471: fix using wrong ce_gpio in rt9471_probe() power: supply: max77650: Make max77650_charger_disable() return void Documentation: power: rt9467: Document exported sysfs entries power: supply: rt9467: Add Richtek RT9467 charger driver dt-bindings: power: supply: Add Richtek RT9467 battery charger Documentation: power: rt9471: Document exported sysfs entries power: supply: rt9471: Add Richtek RT9471 charger driver dt-bindings: power: supply: Add Richtek RT9471 battery charger power: supply: max1721x: Use strscpy() is more robust and safer power: supply: test-power: use strscpy() instead of strncpy() power: supply: bq27xxx: fix reporting critical level power: supply: bq256xx: Init ichg/vbat value with chip default value power: supply: collie_battery: Convert to GPIO descriptors (part 2) power: supply: remove faulty cooling logic ...
2023-02-25dt-bindings: power: supply: Revise Richtek RT9467 compatible nameChiaEn Wu1-3/+3
Revise RT9467 compatible name from "richtek,rt9467-charger" to "richtek,rt9467" because it has to match the "compatible name" in the source code. Fixes: e1b4620fb503 ("dt-bindings: power: supply: Add Richtek RT9467 battery charger") Reported-by: Rob Herring <robh@kernel.org> Signed-off-by: ChiaEn Wu <chiaen_wu@richtek.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-02 04:35:16 +0300