| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The mc146818_decode_year macro is used only in mc146818_get_cmos_time(),
which in turn is called only in
arch/mips/loongson2ef/common/time.c
and
arch/mips/mti-malta/malta-time.c
so on mach-jazz it is unused and can be removed. On other platforms it
is defined in the same way, so it can be safely folded into
mc146818_get_cmos_time().
Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
The mc146818_decode_year macro is used only in mc146818_get_cmos_time,
which in turn is called only in
arch/mips/loongson2ef/common/time.c
and
arch/mips/mti-malta/malta-time.c
So no SNI or mach-rm content. SNI did not use mc146818_get_cmos_time
apparently since
commit 06cf5583fd9a ("[MIPS] SNI RM updates")
in 2007.
Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
I have checked carefully: this function is unused, so remove it.
The last caller appears to have been removed in 2007 in
commit 4b550488f894 ("[MIPS] Deforest the function pointer jungle in the time code.")
mc146818-time.h is included only in three files:
- arch/mips/mti-malta/malta-time.c
- arch/mips/loongson64/numa.c
- arch/mips/loongson2ef/common/time.c
Also, remove unused macros USEC_AFTER/USEC_BEFORE.
Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
On MIPS architecture with CPS-based SMP support, all CPU cores in the
same cluster run at the same frequency since they share the same L2
cache, requiring a fixed CPU/L2 cache ratio.
This allows to implement calibrate_delay_is_known(), which will return
0 (triggering calibration) only for the primary CPU of each
cluster. For other CPUs, we can simply reuse the value from their
cluster's primary CPU core.
With the introduction of this patch, a configuration running 32 cores
spread across two clusters sees a significant reduction in boot time
by approximately 600 milliseconds.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
The initial implementation of this function goes through all the CPUs
in a cluster to determine if the current CPU is the only one
running. This process occurs every time the function is called.
However, during boot, we already perform this task, so let's take
advantage of this opportunity to create and fill a CPU bitmask that
can be easily and efficiently used later.
This patch modifies the function to allow providing the first
available online CPU when one already exists, which is necessary for
delay CPU calibration optimization.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
It is possible that MMID is supported at the CPU level, but its
integration in a SoC prevents its usage. For instance, if the
System-level Interconnect (also known as Network on Chip) does not
support global invalidation, then the MMID feature is not usable. The
current implementation of MMID relies on the GINV* instructions.
This patch allows the disabling of MMID based on a device tree
property, as this issue cannot be detected at runtime.
MMID is set up very early during the boot process, even before device
tree data can be accessed. Therefore, when we determine whether MMID
needs to be disabled, some MMID setup has already been performed for
the boot CPU. Consequently, we must revert the MMID setup on the first
CPU before disabling the feature for the subsequent CPUs that will be
initialized later.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Enable I2C support on the EyeQ5 platform. The evaluation board has a
temperature sensor mounted which helps test the integration.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Enable GPIO support on the EyeQ5 platform.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
This platform uses the same GPIO controller as Nomadik. It however has
its own pinconf & pinmux controller. EyeQ5 is the first platform to use
gpio-nomadik independently from pinctrl-nomadik.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Declare the temperature sensor on I2C bus 2. Its label is the schematics
identifier.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Add the SoC I2C controller nodes to the platform devicetree. Use a
default bus frequency of 400kHz. They are AMBA devices that are matched
on PeriphID.
Set transfer timeout to 10ms instead of Linux's default of 200ms.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
- Sort by moving CONFIG_PAGE_SIZE_16KB=y.
- Drop CONFIG_MACH_EYEQ5=y because it is the default:
# arch/mips/mobileye/Kconfig
choice
prompt "Mobileye EyeQ SoC selection"
default MACH_EYEQ5
- Drop CONFIG_SPARSEMEM_MANUAL=y because:
# mm/Kconfig
choice
prompt "Memory model"
depends on SELECT_MEMORY_MODEL
default SPARSEMEM_MANUAL if ARCH_SPARSEMEM_DEFAULT
default FLATMEM_MANUAL
# arch/mips/Kconfig
config EYEQ
select ARCH_SPARSEMEM_DEFAULT if 64BIT
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
8c8492ca64e7 ("io_uring/net: don't retry connect operation on EPOLLERR")
is a little dirty hack that
1) wrongfully assumes that POLLERR equals to a failed request, which
breaks all POLLERR users, e.g. all error queue recv interfaces.
2) deviates the connection request behaviour from connect(2), and
3) racy and solved at a wrong level.
Nothing can be done with 2) now, and 3) is beyond the scope of the
patch. At least solve 1) by moving the hack out of generic poll handling
into io_connect().
Cc: stable@vger.kernel.org
Fixes: 8c8492ca64e79 ("io_uring/net: don't retry connect operation on EPOLLERR")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/3dc89036388d602ebd84c28e5042e457bdfc952b.1752682444.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
These functions are exported but their prototypes are not defined.
This patch adds the missing function prototypes to fix the following
compilation warnings:
arch/mips/kernel/vpe-mt.c:180:7: error: no previous prototype for 'vpe_alloc' [-Werror=missing-prototypes]
180 | void *vpe_alloc(void)
| ^~~~~~~~~
arch/mips/kernel/vpe-mt.c:198:5: error: no previous prototype for 'vpe_start' [-Werror=missing-prototypes]
198 | int vpe_start(void *vpe, unsigned long start)
| ^~~~~~~~~
arch/mips/kernel/vpe-mt.c:208:5: error: no previous prototype for 'vpe_stop' [-Werror=missing-prototypes]
208 | int vpe_stop(void *vpe)
| ^~~~~~~~
arch/mips/kernel/vpe-mt.c:229:5: error: no previous prototype for 'vpe_free' [-Werror=missing-prototypes]
229 | int vpe_free(void *vpe)
| ^~~~~~~~
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Now that DYNAMIC_FTRACE was introduced, there is no need to support
static ftrace as it is way less performant. This simplifies the code and
prevents build failures as reported by kernel test robot when
!DYNAMIC_FTRACE.
Also make sure that FUNCTION_TRACER can only be selected if
DYNAMIC_FTRACE is supported (we have a dependency on the toolchain).
Co-developed-by: chenmiao <chenmiao.ku@gmail.com>
Signed-off-by: chenmiao <chenmiao.ku@gmail.com>
Fixes: b2137c3b6d7a ("riscv: ftrace: prepare ftrace for atomic code patching")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202506191949.o3SMu8Zn-lkp@intel.com/
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250716-dev-alex-static_ftrace-v1-1-ba5d2b6fc9c0@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
|
|
Add missing cast to signed long.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Fixes: 956d705dd279 ("riscv: Unaligned load/store handling for M_MODE")
Tested-by: Clément Léger <cleger@rivosinc.com>
Link: https://lore.kernel.org/r/mvmikk0goil.fsf@suse.de
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
|
|
force_sig_fault() takes a spinlock, which is a sleeping lock with
CONFIG_PREEMPT_RT=y. However, exception handling calls force_sig_fault()
with interrupt disabled, causing a sleeping in atomic context warning.
This can be reproduced using userspace programs such as:
int main() { asm ("ebreak"); }
or
int main() { asm ("unimp"); }
There is no reason that interrupt must be disabled while handling
exceptions from userspace.
Enable interrupt while handling user exceptions. This also has the added
benefit of avoiding unnecessary delays in interrupt handling.
Fixes: f0bddf50586d ("riscv: entry: Convert to generic entry")
Suggested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250625085630.3649485-1-namcao@linutronix.de
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
|
|
Convert the Renesas WDT watchdog driver from SIMPLE_DEV_PM_OPS() to
DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr(). This lets us drop the
__maybe_unused annotations from its suspend and resume callbacks, and
reduces kernel size in case CONFIG_PM or CONFIG_PM_SLEEP is disabled.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/3d6d46ff56c908880a167ffb2a74c713060a1a57.1752088043.git.geert+renesas@glider.be
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The driver probes with the invalid timeout value when
'iTCO_wdt_set_timeout()' fails, as its return value is not checked. In
this case, when executing "wdctl", we may get:
Device: /dev/watchdog0
Timeout: 30 seconds
Timeleft: 613 seconds
The timeout value is the value of "heartbeat" or "WATCHDOG_TIMEOUT", and
the timeleft value is calculated from the register value we actually read
(0xffff) by masking with 0x3ff and converting ticks to seconds (* 6 / 10).
Add error handling to return the failure code if 'iTCO_wdt_set_timeout()'
fails, ensuring the driver probe fails and prevents invalid operation.
Signed-off-by: Ziyan Fu <fuzy5@lenovo.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250704073518.7838-1-13281011316@163.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Use the newly added of_reserved_mem_region_to_resource() function to
handle "memory-region" properties.
The error handling is a bit different. "memory-region" is optional, so
failed lookup is not an error. But then an error in
of_address_to_resource() is treated as an error. However, that
distinction is not really important. Either the region is available
and usable or it is not. So now, it is just
of_reserved_mem_region_to_resource() which is checked for an error.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250703183518.2075108-1-robh@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Allow clocks property to fix below CHECK_DTB warning:
arch/arm/boot/dts/nxp/lpc/lpc3250-phy3250.dtb: watchdog@4003c000 (nxp,pnx4008-wdt): Unevaluated properties are not allowed ('clocks' was unexpected)
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250624201227.2515275-1-Frank.Li@nxp.com
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The "rec->len" value comes from the firmware. We generally do
trust firmware, but it's always better to double check. If
the length value is too large it would lead to memory corruption
when we set "data[i] = ret;"
Fixes: 217209db0204 ("watchdog: ziirave_wdt: Add support to upload the firmware.")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/3b58b453f0faa8b968c90523f52c11908b56c346.1748463049.git.dan.carpenter@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Stephen reported new 'make htmldocs' warnings introduced by 4cc21a00762b
("block: add tracepoint for blk_zone_update_request_bio").
One is a wrong function name in the tracepoint's kernel-doc and one is a
wrong function parameter.
Fix these so 'make htmldocs' is warning free again for the block layer
tracepoints.
Fixes: 4cc21a00762b ("block: add tracepoint for blk_zone_update_request_bio")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250716133631.94898-1-johannes.thumshirn@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Building with W=1 reports the following:
drivers/md/raid10.c: In function ‘sync_request_write’:
drivers/md/raid10.c:2441:21: error: variable ‘d’ set but not used [-Werror=unused-but-set-variable]
2441 | int d;
| ^
cc1: all warnings being treated as errors
Remove the usage of that variable.
Fixes: 752d0464b78a ("md: clean up accounting for issued sync IO")
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/linux-raid/20250709104814.2307276-1-john.g.garry@oracle.com
Signed-off-by: Yu Kuai <yukuai@kernel.org>
|
|
Added match table entry on ptl machines to support HDMI-In capture
with rt5682 I2S audio codec. also added the respective quirk
configuration in rt5682 machine driver.
Signed-off-by: Balamurugan C <balamurugan.c@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20250716082300.1810352-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This code was changed from using devm_ioremap() which returns NULL to
using devm_ioremap_resource() which returns error pointers. Update
the error checking to match.
Fixes: defe01abfb7f ("spi: stm32-ospi: Use of_reserved_mem_region_to_resource() for "memory-region"")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/fb2a26a2-119b-4b5a-8d44-b29e2c736081@sabinyo.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some of our EDIDs are (rightfully) invalid, but most of them should be
valid.
Let's add the edid-decode --check of these EDIDs when they were
generated, so we know what to expect going forward, and a comment to
explicitly mention when we expect them to be broken.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250625-drm-update-edid-v1-3-2d963743ab9e@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
For some reason, the HDMI VSDBs in our kunit EDIDs had a length longer
than expected.
While this was harmless, we should get rid of it to make it somewhat
predictable.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250625-drm-update-edid-v1-2-2d963743ab9e@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Add status power led node for StarFive VisionFive2 and variant boards.
Signed-off-by: E Shattow <e@freeshell.de>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Improve style with node property order sort of common properties before
vendor prefixes
Signed-off-by: E Shattow <e@freeshell.de>
Acked-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
For some reason, some EDIDs used by kunit had Monitor Range Limits
making no sense, and not matching the edid-decode output in the comment.
While they were in the comments as:
Display Range Limits:
Monitor ranges (GTF): 50-70 Hz V, 30-70 kHz H, max dotclock 150 MHz
They were actually:
Display Range Limits:
Monitor ranges (GTF): 50-70 Hz V, 0-0 kHz H, max dotclock 1960 MHz
Fix that section of the EDIDs to match the expected edid-decode output.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250625-drm-update-edid-v1-1-2d963743ab9e@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
As reported by lockdep, some patching was done without acquiring
text_mutex, so there could be a race when mapping the page to patch
since we use the same fixmap entry.
Reported-by: Han Gao <rabenda.cn@gmail.com>
Reported-by: Vivian Wang <wangruikang@iscas.ac.cn>
Reported-by: Yao Zi <ziyao@disroot.org>
Closes: https://lore.kernel.org/linux-riscv/aGODMpq7TGINddzM@pie.lan/
Tested-by: Yao Zi <ziyao@disroot.org>
Tested-by: Han Gao <rabenda.cn@gmail.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250711-alex-fixes-v2-1-d85a5438da6c@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
|
|
The presence or absence of the CPPC SBI extension is currently logged
on every boot. This message is not particularly useful and can clutter
the boot log. Remove this debug message to reduce noise during boot.
This change has no functional impact.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Drew Fustini <fustini@kernel.org>
Link: https://lore.kernel.org/r/20250711140013.3043463-1-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
|
|
Even though those relocations should not be present in the final
vmlinux, there are a lot of them. And since those relocations are
considered "bad", they flood the compilation output which may hide some
legitimate bad relocations.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Tested-by: Ron Economos <re@w6rz.net>
Link: https://lore.kernel.org/r/20250710-dev-alex-riscv_none_bad_relocs_v1-v1-1-758f2fcc6e75@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
|
|
Move to using the new API devm_drm_panel_alloc() to allocate the
panel. In the call to the new API, avoid using explicit type and use
__typeof() for more type safety.
Signed-off-by: Anusha Srivatsa <asrivats@redhat.com>
Link: https://lore.kernel.org/r/20250710-b4-driver-convert-last-part-july-v1-14-de73ba81b2f5@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Move to using the new API devm_drm_panel_alloc() to allocate the
panel. In the call to the new API, avoid using explicit type and use
__typeof() for more type safety.
Signed-off-by: Anusha Srivatsa <asrivats@redhat.com>
Link: https://lore.kernel.org/r/20250710-b4-driver-convert-last-part-july-v1-13-de73ba81b2f5@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Move to using the new API devm_drm_panel_alloc() to allocate the
panel. In the call to the new API, avoid using explicit type and use
__typeof() for more type safety.
Signed-off-by: Anusha Srivatsa <asrivats@redhat.com>
Link: https://lore.kernel.org/r/20250710-b4-driver-convert-last-part-july-v1-12-de73ba81b2f5@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Move to using the new API devm_drm_panel_alloc() to allocate the
panel. In the call to the new API, avoid using explicit type and use
__typeof() for more type safety.
Signed-off-by: Anusha Srivatsa <asrivats@redhat.com>
Link: https://lore.kernel.org/r/20250710-b4-driver-convert-last-part-july-v1-11-de73ba81b2f5@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Move to using the new API devm_drm_panel_alloc() to allocate the
panel. In the call to the new API, avoid using explicit type and use
__typeof() for more type safety.
Signed-off-by: Anusha Srivatsa <asrivats@redhat.com>
Link: https://lore.kernel.org/r/20250710-b4-driver-convert-last-part-july-v1-10-de73ba81b2f5@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Move to using the new API devm_drm_panel_alloc() to allocate the
panel. In the call to the new API, avoid using explicit type and use
__typeof() for more type safety.
Signed-off-by: Anusha Srivatsa <asrivats@redhat.com>
Link: https://lore.kernel.org/r/20250710-b4-driver-convert-last-part-july-v1-9-de73ba81b2f5@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Move to using the new API devm_drm_panel_alloc() to allocate the
panel. In the call to the new API, avoid using explicit type and use
__typeof() for more type safety.
Signed-off-by: Anusha Srivatsa <asrivats@redhat.com>
Link: https://lore.kernel.org/r/20250710-b4-driver-convert-last-part-july-v1-8-de73ba81b2f5@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Move to using the new API devm_drm_panel_alloc() to allocate the
panel. In the call to the new API, avoid using explicit type and use
__typeof() for more type safety.
Signed-off-by: Anusha Srivatsa <asrivats@redhat.com>
Link: https://lore.kernel.org/r/20250710-b4-driver-convert-last-part-july-v1-7-de73ba81b2f5@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Move to using the new API devm_drm_panel_alloc() to allocate the
panel. In the call to the new API, avoid using explicit type and use
__typeof() for more type safety.
Signed-off-by: Anusha Srivatsa <asrivats@redhat.com>
Link: https://lore.kernel.org/r/20250710-b4-driver-convert-last-part-july-v1-6-de73ba81b2f5@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Move to using the new API devm_drm_panel_alloc() to allocate the
panel. In the call to the new API, avoid using explicit type and use
__typeof() for more type safety.
Signed-off-by: Anusha Srivatsa <asrivats@redhat.com>
Link: https://lore.kernel.org/r/20250710-b4-driver-convert-last-part-july-v1-5-de73ba81b2f5@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Move to using the new API devm_drm_panel_alloc() to allocate the
panel. In the call to the new API, avoid using explicit type and use
__typeof() for more type safety.
Signed-off-by: Anusha Srivatsa <asrivats@redhat.com>
Link: https://lore.kernel.org/r/20250710-b4-driver-convert-last-part-july-v1-4-de73ba81b2f5@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Move to using the new API devm_drm_panel_alloc() to allocate the
panel. In the call to the new API, avoid using explicit type and use
__typeof() for more type safety.
Signed-off-by: Anusha Srivatsa <asrivats@redhat.com>
Link: https://lore.kernel.org/r/20250710-b4-driver-convert-last-part-july-v1-3-de73ba81b2f5@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Move to using the new API devm_drm_panel_alloc() to allocate the
panel. In the call to the new API, avoid using explicit type and use
__typeof() for more type safety.
Signed-off-by: Anusha Srivatsa <asrivats@redhat.com>
Link: https://lore.kernel.org/r/20250710-b4-driver-convert-last-part-july-v1-2-de73ba81b2f5@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Move to using the new API devm_drm_panel_alloc() to allocate the
panel. In the call to the new API, avoid using explicit type and use
__typeof() for more type safety.
Signed-off-by: Anusha Srivatsa <asrivats@redhat.com>
Link: https://lore.kernel.org/r/20250710-b4-driver-convert-last-part-july-v1-1-de73ba81b2f5@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
On 11 Oct 2022, it was reported that the crc32 verification
of the u-boot environment failed only on big-endian systems
for the u-boot-env nvmem layout driver with the following error.
Invalid calculated CRC32: 0x88cd6f09 (expected: 0x096fcd88)
This problem has been present since the driver was introduced,
and before it was made into a layout driver.
The suggested fix at the time was to use further endianness
conversion macros in order to have both the stored and calculated
crc32 values to compare always represented in the system's endianness.
This was not accepted due to sparse warnings
and some disagreement on how to handle the situation.
Later on in a newer revision of the patch, it was proposed to use
cpu_to_le32() for both values to compare instead of le32_to_cpu()
and store the values as __le32 type to remove compilation errors.
The necessity of this is based on the assumption that the use of crc32()
requires endianness conversion because the algorithm uses little-endian,
however, this does not prove to be the case and the issue is unrelated.
Upon inspecting the current kernel code,
there already is an existing use of le32_to_cpu() in this driver,
which suggests there already is special handling for big-endian systems,
however, it is big-endian systems that have the problem.
This, being the only functional difference between architectures
in the driver combined with the fact that the suggested fix
was to use the exact same endianness conversion for the values
brings up the possibility that it was not necessary to begin with,
as the same endianness conversion for two values expected to be the same
is expected to be equivalent to no conversion at all.
After inspecting the u-boot environment of devices of both endianness
and trying to remove the existing endianness conversion,
the problem is resolved in an equivalent way as the other suggested fixes.
Ultimately, it seems that u-boot is agnostic to endianness
at least for the purpose of environment variables.
In other words, u-boot reads and writes the stored crc32 value
with the same endianness that the crc32 value is calculated with
in whichever endianness a certain architecture runs on.
Therefore, the u-boot-env driver does not need to convert endianness.
Remove the usage of endianness macros in the u-boot-env driver,
and change the type of local variables to maintain the same return type.
If there is a special situation in the case of endianness,
it would be a corner case and should be handled by a unique "compatible".
Even though it is not necessary to use endianness conversion macros here,
it may be useful to use them in the future for consistent error printing.
Fixes: d5542923f200 ("nvmem: add driver handling U-Boot environment variables")
Reported-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Link: https://lore.kernel.org/all/20221011024928.1807-1-musashino.open@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: "Michael C. Pratt" <mcpratt@pm.me>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://lore.kernel.org/r/20250716144210.4804-1-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Merge series from Daniel Almeida <daniel.almeida@collabora.com>:
Add basic rust bindings for the regulator API.
|
