| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The second instance of TBSVC_MATCH_PROTOCOL_VERSION seems to have been
intended to be TBSVC_MATCH_PROTOCOL_REVISION.
Fixes: d1ff70241a27 ("thunderbolt: Add support for XDomain discovery protocol")
Cc: stable <stable@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://lore.kernel.org/r/20250721050136.30004-1-ebiggers@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The current power direction of an USB-C port also influences the
power_supply's online status, so a power role change should also update
the power_supply.
Fixes an issue on some systems where plugging in a normal USB device in
for the first time after a reboot will cause upower to erroneously
consider the system to be connected to AC power.
Cc: stable <stable@kernel.org>
Fixes: 0e6371fbfba3 ("usb: typec: ucsi: Report power supply changes")
Signed-off-by: Myrrh Periwinkle <myrrhperiwinkle@qtmlabs.xyz>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250721-fix-ucsi-pwr-dir-notify-v1-1-e53d5340cb38@qtmlabs.xyz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ucsi_psy_get_current_max would return 0mA as the maximum current if
UCSI detected a BC or a Default USB Power sporce.
The comment in this function is true that we can't tell the difference
between DCP/CDP or SDP chargers, but we can guarantee that at least 1-unit
of USB 1.1/2.0 power is available, which is 100mA, which is a better
fallback value than 0, which causes some userspaces, including the ChromeOS
power manager, to regard this as a power source that is not providing
any power.
In reality, 100mA is guaranteed from all sources in these classes.
Signed-off-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Jameson Thies <jthies@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20250717200805.3710473-1-bleung@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch fixes a race condition communication error, which ends up in
PD hard resets when losing the race. Some systems, like the Radxa ROCK
5B are powered through USB-C without any backup power source and use a
FUSB302 chip to do the PD negotiation. This means it is quite important
to avoid hard resets, since that effectively kills the system's
power-supply.
I've found the following race condition while debugging unplanned power
loss during booting the board every now and then:
1. lots of TCPM/FUSB302/PD initialization stuff
2. TCPM ends up in SNK_WAIT_CAPABILITIES (tcpm_set_pd_rx is enabled here)
3. the remote PD source does not send anything, so TCPM does a SOFT RESET
4. TCPM ends up in SNK_WAIT_CAPABILITIES for the second time
(tcpm_set_pd_rx is enabled again, even though it is still on)
At this point I've seen broken CRC good messages being send by the
FUSB302 with a logic analyzer sniffing the CC lines. Also it looks like
messages are being lost and things generally going haywire with one of
the two sides doing a hard reset once a broken CRC good message was send
to the bus.
I think the system is running into a race condition, that the FIFOs are
being cleared and/or the automatic good CRC message generation flag is
being updated while a message is already arriving.
Let's avoid this by caching the PD RX enabled state, as we have already
processed anything in the FIFOs and are in a good state. As a side
effect that this also optimizes I2C bus usage :)
As far as I can tell the problem theoretically also exists when TCPM
enters SNK_WAIT_CAPABILITIES the first time, but I believe this is less
critical for the following reason:
On devices like the ROCK 5B, which are powered through a TCPM backed
USB-C port, the bootloader must have done some prior PD communication
(initial communication must happen within 5 seconds after plugging the
USB-C plug). This means the first time the kernel TCPM state machine
reaches SNK_WAIT_CAPABILITIES, the remote side is not sending messages
actively. On other devices a hard reset simply adds some extra delay and
things should be good afterwards.
Fixes: c034a43e72dda ("staging: typec: Fairchild FUSB302 Type-c chip driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250704-fusb302-race-condition-fix-v1-1-239012c0e27a@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Selecting DRM_AUX_HPD_BRIDGE is not possible from a built-in driver when
CONFIG_DRM=m:
WARNING: unmet direct dependencies detected for DRM_AUX_HPD_BRIDGE
Depends on [m]: HAS_IOMEM [=y] && DRM [=m] && DRM_BRIDGE [=y] && OF [=y]
Selected by [y]:
- UCSI_LENOVO_YOGA_C630 [=y] && USB_SUPPORT [=y] && TYPEC [=y] && TYPEC_UCSI [=y] && EC_LENOVO_YOGA_C630 [=y] && DRM_BRIDGE [=y] && OF [=y]
arm-linux-gnueabi-ld: drivers/gpu/drm/bridge/aux-hpd-bridge.o: in function `drm_aux_hpd_bridge_notify':
aux-hpd-bridge.c:(.text.drm_aux_hpd_bridge_notify+0x28): undefined reference to `drm_bridge_hpd_notify'
arm-linux-gnueabi-ld: drivers/gpu/drm/bridge/aux-hpd-bridge.o: in function `drm_aux_hpd_bridge_probe':
aux-hpd-bridge.c:(.text.drm_aux_hpd_bridge_probe+0x20): undefined reference to `__devm_drm_bridge_alloc'
Add a dependency to force UCSI_LENOVO_YOGA_C630 to be a loadable module as
well in this configuration.
Fixes: eb90d36bfa06 ("usb: typec: ucsi: yoga-c630: register DRM HPD bridge")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250717133045.991254-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
1. In func configfs_composite_bind() -> composite_os_desc_req_prepare():
if kmalloc fails, the pointer cdev->os_desc_req will be freed but not
set to NULL. Then it will return a failure to the upper-level function.
2. in func configfs_composite_bind() -> composite_dev_cleanup():
it will checks whether cdev->os_desc_req is NULL. If it is not NULL, it
will attempt to use it.This will lead to a use-after-free issue.
BUG: KASAN: use-after-free in composite_dev_cleanup+0xf4/0x2c0
Read of size 8 at addr 0000004827837a00 by task init/1
CPU: 10 PID: 1 Comm: init Tainted: G O 5.10.97-oh #1
kasan_report+0x188/0x1cc
__asan_load8+0xb4/0xbc
composite_dev_cleanup+0xf4/0x2c0
configfs_composite_bind+0x210/0x7ac
udc_bind_to_driver+0xb4/0x1ec
usb_gadget_probe_driver+0xec/0x21c
gadget_dev_desc_UDC_store+0x264/0x27c
Fixes: 37a3a533429e ("usb: gadget: OS Feature Descriptors support")
Cc: stable <stable@kernel.org>
Signed-off-by: Tao Xue <xuetao09@huawei.com>
Link: https://lore.kernel.org/r/20250721093908.14967-1-xuetao09@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix a checkpatch warning:
CHECK: Please use a blank line after function/struct/union/enum declarations
Reported-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/36d1c961-319e-4457-bdc1-69f8b6bed33e@sabinyo.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Documentation/filesystems/sysfs.rst mentions that show() should only
use sysfs_emit() or sysfs_emit_at() when formating the value to be
returned to user space. So replace scnprintf() with sysfs_emit().
Signed-off-by: Sumanth Gavini <sumanth.gavini@yahoo.com>
Link: https://lore.kernel.org/r/20250718175037.299710-1-sumanth.gavini@yahoo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch cleans up a few cases where assignments were made
inside of if conditions, like
if ((rv = func()) < 0)
into two lines, to improve readability and be more in-line with
Linux kernel coding style. It also cleans up checkpatch warnings
like:
ERROR: do not use assignment in if condition
No functional change, just a style and maintainability fix.
Signed-off-by: Darshan Rathod <darshan.rathod@siqol.com>
Link: https://lore.kernel.org/r/20250718091045.264129-1-darshan.rathod@siqol.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix NULL pointer crash in uvcg_framebased_make due to uninitialized color
matching descriptor for frame-based format which was added in
commit f5e7bdd34aca ("usb: gadget: uvc: Allow creating new color matching
descriptors") that added handling for uncompressed and mjpeg format.
Crash is seen when userspace configuration (via configfs) does not
explicitly define the color matching descriptor. If color_matching is not
found, config_group_find_item() returns NULL. The code then jumps to
out_put_cm, where it calls config_item_put(color_matching);. If
color_matching is NULL, this will dereference a null pointer, leading to a
crash.
[ 2.746440] Unable to handle kernel NULL pointer dereference at virtual address 000000000000008c
[ 2.756273] Mem abort info:
[ 2.760080] ESR = 0x0000000096000005
[ 2.764872] EC = 0x25: DABT (current EL), IL = 32 bits
[ 2.771068] SET = 0, FnV = 0
[ 2.771069] EA = 0, S1PTW = 0
[ 2.771070] FSC = 0x05: level 1 translation fault
[ 2.771071] Data abort info:
[ 2.771072] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000
[ 2.771073] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 2.771074] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 2.771075] user pgtable: 4k pages, 39-bit VAs, pgdp=00000000a3e59000
[ 2.771077] [000000000000008c] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000
[ 2.771081] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP
[ 2.771084] Dumping ftrace buffer:
[ 2.771085] (ftrace buffer empty)
[ 2.771138] CPU: 7 PID: 486 Comm: ln Tainted: G W E 6.6.58-android15
[ 2.771139] Hardware name: Qualcomm Technologies, Inc. SunP QRD HDK (DT)
[ 2.771140] pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
[ 2.771141] pc : __uvcg_fill_strm+0x198/0x2cc
[ 2.771145] lr : __uvcg_iter_strm_cls+0xc8/0x17c
[ 2.771146] sp : ffffffc08140bbb0
[ 2.771146] x29: ffffffc08140bbb0 x28: ffffff803bc81380 x27: ffffff8023bbd250
[ 2.771147] x26: ffffff8023bbd250 x25: ffffff803c361348 x24: ffffff803d8e6768
[ 2.771148] x23: 0000000000000004 x22: 0000000000000003 x21: ffffffc08140bc48
[ 2.771149] x20: 0000000000000000 x19: ffffffc08140bc48 x18: ffffffe9f8cf4a00
[ 2.771150] x17: 000000001bf64ec3 x16: 000000001bf64ec3 x15: ffffff8023bbd250
[ 2.771151] x14: 000000000000000f x13: 004c4b40000f4240 x12: 000a2c2a00051615
[ 2.771152] x11: 000000000000004f x10: ffffffe9f76b40ec x9 : ffffffe9f7e389d0
[ 2.771153] x8 : ffffff803d0d31ce x7 : 000f4240000a2c2a x6 : 0005161500028b0a
[ 2.771154] x5 : ffffff803d0d31ce x4 : 0000000000000003 x3 : 0000000000000000
[ 2.771155] x2 : ffffffc08140bc50 x1 : ffffffc08140bc48 x0 : 0000000000000000
[ 2.771156] Call trace:
[ 2.771157] __uvcg_fill_strm+0x198/0x2cc
[ 2.771157] __uvcg_iter_strm_cls+0xc8/0x17c
[ 2.771158] uvcg_streaming_class_allow_link+0x240/0x290
[ 2.771159] configfs_symlink+0x1f8/0x630
[ 2.771161] vfs_symlink+0x114/0x1a0
[ 2.771163] do_symlinkat+0x94/0x28c
[ 2.771164] __arm64_sys_symlinkat+0x54/0x70
[ 2.771164] invoke_syscall+0x58/0x114
[ 2.771166] el0_svc_common+0x80/0xe0
[ 2.771168] do_el0_svc+0x1c/0x28
[ 2.771169] el0_svc+0x3c/0x70
[ 2.771172] el0t_64_sync_handler+0x68/0xbc
[ 2.771173] el0t_64_sync+0x1a8/0x1ac
Initialize color matching descriptor for frame-based format to prevent
NULL pointer crash by mirroring the handling done for uncompressed and
mjpeg formats.
Fixes: 7b5a58952fc3 ("usb: gadget: uvc: configfs: Add frame-based frame format support")
Cc: stable <stable@kernel.org>
Signed-off-by: Akash Kumar <quic_akakum@quicinc.com>
Link: https://lore.kernel.org/r/20250718085138.1118788-1-quic_akakum@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
On the devices that need their endpoints to get an
initial clear_halt, this needs to be done before
the devices can be opened. That means it needs to be
before the devices are registered.
Fixes: 15bf722e6f6c0 ("cdc-acm: Add support of ATOL FPrint fiscal printers")
Cc: stable <stable@kernel.org>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20250717141259.2345605-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add support for ASUS PM3406CKA and PM3606CKA.
Laptops use 2 CS35L41 Amps with HDA, using Internal boost, with I2C
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://patch.msgid.link/20250721135406.366912-1-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
When INTEL_PMT_TELEMETRY is in a loadable module, the discovery
test cannot be built-in:
x86_64-linux-ld: drivers/platform/x86/intel/pmt/discovery-kunit.o: in function `test_intel_pmt_get_regions_by_feature':
discovery-kunit.c:(.text+0x29d): undefined reference to `intel_pmt_get_regions_by_feature'
x86_64-linux-ld: discovery-kunit.c:(.text+0x2c3): undefined reference to `intel_pmt_put_feature_group'
Add a Kconfig dependency to prevent this.
Fixes: b9707d46a959 ("platform/x86/intel/pmt: KUNIT test for PMT Enhanced Discovery API")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250714081559.4056777-1-arnd@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
On g4x we currently use the 96MHz non-SSC refclk, which can't actually
generate an exact 2.7 Gbps link rate. In practice we end up with 2.688
Gbps which seems to be close enough to actually work, but link training
is currently failing due to miscalculating the DP_LINK_BW value (we
calcualte it directly from port_clock which reflects the actual PLL
outpout frequency).
Ideas how to fix this:
- nudge port_clock back up to 270000 during PLL computation/readout
- track port_clock and the nominal link rate separately so they might
differ a bit
- switch to the 100MHz refclk, but that one should be SSC so perhaps
not something we want
While we ponder about a better solution apply some band aid to the
immediate issue of miscalculated DP_LINK_BW value. With this
I can again use 2.7 Gbps link rate on g4x.
Cc: stable@vger.kernel.org
Fixes: 665a7b04092c ("drm/i915: Feed the DPLL output freq back into crtc_state")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250710201718.25310-2-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
(cherry picked from commit a8b874694db5cae7baaf522756f87acd956e6e66)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Merge the fixes branch into the for-next branch to resolve Makefile
conflict and include the power supply accessor work that is required
by the upcoming Uniwill driver.
|
|
We have a common error path where we abort the transaction, but like this
in case we get a transaction abort stack trace we don't know exactly which
previous function call failed. Instead abort the transaction after any
function call that returns an error, so that we can easily identify which
function failed.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The label is only used once and we can instead return directly where it's
used, besides the fact that all we do under the label is to return the
value of 'ret'. So get rid of the label and return directly.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Instead of having a common btrfs_abort_transaction() call for when any of
the two btrfs_dec_ref() calls fail, move the btrfs_abort_transaction() to
happen immediately after each one of the calls, so that when analysing a
stack trace with a transaction abort we know which call failed.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Instead of having a common btrfs_abort_transaction() call for when either
insert_tree_block_ref() failed or when insert_extent_data_ref() failed,
move the btrfs_abort_transaction() to happen immediately after each one of
those calls, so that when analysing a stack trace with a transaction abort
we know which call failed.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Instead of having a common btrfs_abort_transaction() call for when either
btrfs_orphan_add() failed or when btrfs_add_link() failed, move the
btrfs_abort_transaction() to happen immediately after each one of those
calls, so that when analysing a stack trace with a transaction abort we
know which call failed.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Commit 12724ce3fe1a ("iommu/vt-d: Optimize iotlb_sync_map for
non-caching/non-RWBF modes") dynamically set iotlb_sync_map. This causes
synchronization issues due to lack of locking on map and attach paths,
racing iommufd userspace operations.
Invalidation changes must precede device attachment to ensure all flushes
complete before hardware walks page tables, preventing coherence issues.
Make domain->iotlb_sync_map static, set once during domain allocation. If
an IOMMU requires iotlb_sync_map but the domain lacks it, attach is
rejected. This won't reduce domain sharing: RWBF and shadowing page table
caching are legacy uses with legacy hardware. Mixed configs (some IOMMUs
in caching mode, others not) are unlikely in real-world scenarios.
Fixes: 12724ce3fe1a ("iommu/vt-d: Optimize iotlb_sync_map for non-caching/non-RWBF modes")
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20250721051657.1695788-1-baolu.lu@linux.intel.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
If the BIOS sets a _PPC frequency limit upfront, it will fail to take
effect due to a call ordering issue. Namely, freq_qos_update_request()
is called before freq_qos_add_request() for the given request causing
the constraint update to be ignored. The call sequence in question is
as follows:
cpufreq_policy_online()
acpi_cpufreq_cpu_init()
acpi_processor_register_performance()
acpi_processor_get_performance_info()
acpi_processor_get_platform_limit()
freq_qos_update_request(&perflib_req) <- inactive QoS request
blocking_notifier_call_chain(&cpufreq_policy_notifier_list,
CPUFREQ_CREATE_POLICY)
acpi_processor_notifier()
acpi_processor_ppc_init()
freq_qos_add_request(&perflib_req) <- QoS request activation
Address this by adding an acpi_processor_get_platform_limit() call
to acpi_processor_ppc_init(), after the perflib_req activation via
freq_qos_add_request(), which causes the initial _PPC limit to be
picked up as appropriate. However, also ensure that the _PPC limit
will not be picked up in the cases when the cpufreq driver does not
call acpi_processor_register_performance() by adding a pr->performance
check to the related_cpus loop in acpi_processor_ppc_init().
Fixes: d15ce412737a ("ACPI: cpufreq: Switch to QoS requests instead of cpufreq notifier")
Signed-off-by: Jiayi Li <lijiayi@kylinos.cn>
Link: https://patch.msgid.link/20250721032606.3459369-1-lijiayi@kylinos.cn
[ rjw: Consolidate pr-related checks in acpi_processor_ppc_init() ]
[ rjw: Subject and changelog adjustments ]
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+: 2d8b39a62a5d ACPI: processor: Avoid NULL pointer dereferences at init time
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+: 3000ce3c52f8 cpufreq: Use per-policy frequency QoS
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+: a1bb46c36ce3 ACPI: processor: Add QoS requests for all CPUs
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add LUT entry for MSI/IOMMU in Endpoint mode by calling
imx_pcie_add_lut_by_rid() helper function. Since only one physical function
is supported in the Endpoint mode for now, '0' is passed as the Device ID.
This sets up a single LUT entry required for MSI/IOMMU.
The Endpoint function can operate without LUT configuration if neither
IOMMU nor MSI is used by the platform. This LUT configuration is used for
the EP doorbell feature by allowing the Root Complex to trigger the
doorbell on the Endpoint with the help of the Endpoint MSI controller.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[mani: reworded the comments & commit message and dropped tested-by tag]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250710-ep-msi-v21-2-57683fc7fb25@nxp.com
|
|
Add helper function imx_pcie_add_lut_by_rid(), which will be used by the
upcoming LUT configuration for MSI/IOMMU in the Endpoint mode. No
functional change.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[mani: reworded commit message and dropped tested-by tag]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250710-ep-msi-v21-1-57683fc7fb25@nxp.com
|
|
In __vcpu_run() and do_vsie_run(), we enter an RCU extended quiescent
state (EQS) by calling guest_enter_irqoff(), which lasts until
__vcpu_run() calls guest_exit_irqoff(). However, between the two we
enable interrupts and may handle interrupts during the EQS. As the IRQ
entry code will not wake RCU in this case, we may run the core IRQ code
and IRQ handler without RCU watching, leading to various potential
problems.
It is necessary to unmask (host) interrupts around entering the guest,
as entering the guest via SIE will not automatically unmask these. When
a host interrupt is taken from a guest, it is taken via its regular
host IRQ handler rather than being treated as a direct exit from SIE.
Due to this, we cannot simply mask interrupts around guest entry, and
must handle interrupts during this window, waking RCU as required.
Additionally, between guest_enter_irqoff() and guest_exit_irqoff(), we
use local_irq_enable() and local_irq_disable() to unmask interrupts,
violating the ordering requirements for RCU/lockdep/tracing around
entry/exit sequences. Further, since this occurs in an instrumentable
function, it's possible that instrumented code runs during this window,
with potential usage of RCU, etc.
To fix the RCU wakeup problem, an s390 implementation of
arch_in_rcu_eqs() is added which checks for PF_VCPU in current->flags.
PF_VCPU is set/cleared by guest_timing_{enter,exit}_irqoff(), which
surround the actual guest entry.
To fix the remaining issues, the lower-level guest entry logic is moved
into a shared noinstr helper function using the
guest_state_{enter,exit}_irqoff() helpers. These perform all the
lockdep/RCU/tracing manipulation necessary, but as sie64a() does not
enable/disable interrupts, we must do this explicitly with the
non-instrumented arch_local_irq_{enable,disable}() helpers:
guest_state_enter_irqoff()
arch_local_irq_enable();
sie64a(...);
arch_local_irq_disable();
guest_state_exit_irqoff();
[ajd@linux.ibm.com: rebase, fix commit message]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20250708092742.104309-3-ajd@linux.ibm.com
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20250708092742.104309-3-ajd@linux.ibm.com>
|
|
All architectures have an interruptible RCU extended quiescent state
(EQS) as part of their idle sequences, where interrupts can occur
without RCU watching. Entry code must account for this and wake RCU as
necessary; the common entry code deals with this in irqentry_enter() by
treating any interrupt from an idle thread as potentially having
occurred within an EQS and waking RCU for the duration of the interrupt
via rcu_irq_enter() .. rcu_irq_exit().
Some architectures may have other interruptible EQSs which require
similar treatment. For example, on s390 it is necessary to enable
interrupts around guest entry in the middle of a period where core KVM
code has entered an EQS.
So that architectures can wake RCU in these cases, this patch adds a
new arch_in_rcu_eqs() hook to the common entry code which is checked in
addition to the existing is_idle_thread() check, with RCU woken if
either returns true. A default implementation is provided which always
returns false, which suffices for most architectures.
As no architectures currently implement arch_in_rcu_eqs(), there should
be no functional change as a result of this patch alone. A subsequent
patch will add an s390 implementation to fix a latent bug with missing
RCU wakeups.
[ajd@linux.ibm.com: rebase, fix commit message]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20250708092742.104309-2-ajd@linux.ibm.com
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20250708092742.104309-2-ajd@linux.ibm.com>
|
|
If sg_alloc_table_from_pages() fails, io_import_umem() returns without
cleaning up pinned pages first. Fix it.
Fixes: b84621d96ee02 ("io_uring/zcrx: allocate sgtable for umem areas")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/9fd94d1bc8c316611eccfec7579799182ff3fb0a.1753091564.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Someone needs to release pinned pages in io_import_umem() if accounting
fails. Assign them to the area but return an error, the following
io_zcrx_free_area() will clean them up.
Fixes: 262ab205180d2 ("io_uring/zcrx: account area memory")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/e19f283a912f200c0d427e376cb789fc3f3d69bc.1753091564.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Dan reports that ifq can be null when infering arguments for
io_unaccount_mem() from io_zcrx_free_area(). Fix it by always setting a
correct ifq.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202507180628.gBxrOgqr-lkp@intel.com/
Fixes: 262ab205180d2 ("io_uring/zcrx: account area memory")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/20670d163bb90dba2a81a4150f1125603cefb101.1753091564.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This sensors are currently controlled from userspace, ideally
we will add full drivers in the future.
Signed-off-by: Heiko Schocher <hs@denx.de>
Link: https://patch.msgid.link/20250719063355.73111-3-hs@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add documentation for spi based ABB sensors, which are
currently operated from userspace.
Signed-off-by: Heiko Schocher <hs@denx.de>
Link: https://patch.msgid.link/20250719063355.73111-2-hs@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The glitch was detected in the high frequency of the HP playback.
This patch adjusts the DAC dither setting to avoid this situation
for almost all cases.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://patch.msgid.link/20250721034728.1396238-1-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add the missing op in the device description to avoid issues with jack
detection.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20250721063039.2234279-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Update the MAINTAINERS file to reflect the following changes for two Intel
platform drivers:
- Tony has agreed to take over maintainership of the Intel In-Field Scan
(IFS) driver, and is now listed as the new maintainer.
- Remove myself as the maintainer for the Slim BootLoader (SBL) firmware
update driver and mark it as Orphan. To the best of my knowledge, there
is no one familiar with SBL who can take over this role.
These changes are being made as I will soon be leaving Intel.
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20250714164643.3879784-1-jithu.joseph@intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
For the sake of consistency, use my kernel.org address in all Contact
records in sysfs-bus-acpi and in the MAINTAINERS records related to
ACPI and PNP.
Signed-off-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://patch.msgid.link/2796086.mvXUDI8C0e@rjwysocki.net
|
|
For the sake of consistency, use my kernel.org address in all Contact
records in sysfs-devices-power and sysfs-power, and in the power-domain
DT binding.
Signed-off-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://patch.msgid.link/5911353.DvuYhMxLoT@rjwysocki.net
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux
Merge devfreq updates for v6.17 from Chanwoo Choi:
"- Clean devfreq core and fix bugs
: Replace sscanf with kstrtoul
: Remove redundant devfreq_get_freq_range() on adding devfreq driver
: Check missing NULL pointer check on removing devfreq driver
: Limit max_freq and min_freq to avoid unreachable value
: Fix wrong index on trans_stat sysfs node
- Use devm_* managed function for clock control on sun81-a33-mbus driver
- Add HiSilicon uncore frequencye scaling driver for for HiSilicon Kunpeng SoCs
: The uncore domain includes shared system resources such as interconnects
and L3 cache, and its frequency has a significant impact on system performance
and power consumption. The driver provides the following functions:
- Support to scale frequency scaling with governor and user setting
- Support to query CPUs whose performance is closely related to the uncore domain
- Communication with the platform controller via an ACPI PCC mailbox
to perform actual frequency changes"
* tag 'devfreq-next-for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux:
PM / devfreq: Add HiSilicon uncore frequency scaling driver
PM / devfreq: Allow devfreq driver to add custom sysfs ABIs
PM / devfreq: sun8i-a33-mbus: Simplify by using more devm functions
PM / devfreq: Fix a index typo in trans_stat
PM / devfreq: Check governor before using governor->name
PM / devfreq: Remove redundant devfreq_get_freq_range() calling in devfreq_add_device()
PM / devfreq: Limit max_freq with scaling_min_freq
PM / devfreq: governor: Replace sscanf() with kstrtoul() in set_freq_store()
|
|
With time steering moved to userspace, stp can be enabled
by default.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
With moving time steering to userspace, there's no need
to handle leap seconds inside the kernel. Remove it.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Remove the in-kernel time steering in favour of the new
ptp s390 driver, which allows the kernel clock to be steered
more precise.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
sclp_sync_wait() should use the monotonic clock for the delay loop.
Otherwise the code won't work correctly when the clock is changed.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
This is a cosmetic change because when in smp_emergency_stop()
the system is going to die anyway. But still change the code
to use get_tod_clock_monotonic() to prevent people from copying
broken code.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Otherwise the code might not work correctly when the clock
is changed.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Merge an operating performance points (OPP) update for 6.17 from Viresh
Kumar:
"- Minor cleanup in Rust bindings (Abhinav Ananthu)."
* tag 'opp-updates-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
rust: opp: use c_* types via kernel prelude
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Merge CPUFreq updates for 6.17 from Viresh Kumar:
"- tegra124: Allow building as a module (Aaron Kling).
- Minor cleanups for Rust cpufreq and cpumask APIs and fix MAINTAINERS
entry for cpu.rs (Abhinav Ananthu, Ritvik Gupta, and Lukas Bulwahn).
- Minor cleanups for miscellaneous cpufreq drivers (Arnd Bergmann, Dan
Carpenter, Krzysztof Kozlowski, Sven Peter, and Svyatoslav Ryhel)."
* tag 'cpufreq-arm-updates-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
drivers: cpufreq: add Tegra114 support
rust: cpumask: Replace `MaybeUninit` and `mem::zeroed` with `Opaque` APIs
cpufreq: tegra124: Allow building as a module
cpufreq: dt: Add register helper
cpufreq: Export disable_cpufreq()
cpufreq: armada-8k: Fix off by one in armada_8k_cpufreq_free_table()
cpufreq: armada-8k: make both cpu masks static
rust: cpufreq: use c_ types from kernel prelude
rust: cpufreq: Ensure C ABI compatibility in all unsafe
cpufreq: brcmstb-avs: Fully open-code compatible for grepping
cpufreq: apple: drop default ARCH_APPLE in Kconfig
MAINTAINERS: adjust file entry in CPU HOTPLUG
|
|
This commit remove duplicate assignments for net->pcpu_stat_type
in usbnet_probe().
Signed-off-by: Zqiang <qiang.zhang@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Check that gpfifo.post() exists before trying to call it.
Fixes: 862450a85b85 ("drm/nouveau/gf100-: track chan progress with non-WFI semaphore release")
Reported-by: Jamie Heilman <jamie@audible.transient.net>
Closes: https://lore.kernel.org/lkml/aElJIo9_Se6tAR1a@audible.transient.net/
Reported-by: Rui Salvaterra <rsalvaterra@gmail.com>
Closes: https://lore.kernel.org/all/CALjTZvZgH0N43rMTcZiDVSX93PFL680hsYPwtp8=Ja1OWPvZ1A@mail.gmail.com/
Tested-by: Rui Salvaterra <rsalvaterra@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Link: https://lore.kernel.org/r/20250714025923.29591-1-bskeggs@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
The Synopsys Watchdog driver sets the default timeout to 30 seconds,
but on some devices this is not a valid timeout. E.g. on RK3588 the
actual timeout being used is 44 seconds instead.
Once the watchdog is started the value is updated accordingly, but
it would be better to expose a sensible timeout to userspace without
the need to first start the watchdog.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250717-dw-wdt-fix-initial-timeout-v1-1-86dc864d48dd@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
We need the USB/Thunderbolt fixes in here for other patches to be on top
of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Update file match pattern to include nxp,imx* and fsl,imx*.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20250707-imx95-blk-ctl-7-1-v3-5-c1b676ec13be@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
|
