| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
mptcp_setsockopt_sol_tcp_defer() was doing the same thing as
mptcp_setsockopt_first_sf_only() except for the returned code in case of
error.
Ignoring the error is needed to mimic how TCP_DEFER_ACCEPT is handled
when used with "plain" TCP sockets.
The specific function for TCP_DEFER_ACCEPT can be replaced by the new
mptcp_setsockopt_first_sf_only() helper and errors can be ignored to
stay compatible with TCP. A bit of cleanup.
Suggested-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The goal of this socket option is to configure MPTCP + TFO without
cookie per socket.
It was already possible to enable TFO without a cookie per netns by
setting net.ipv4.tcp_fastopen sysctl knob to the right value. Per route
was also supported by setting 'fastopen_no_cookie' option. This patch
adds a per socket support like it is possible to do with TCP thanks to
TCP_FASTOPEN_NO_COOKIE socket option.
The only thing to do here is to relay the request to the first subflow
like it is already done for TCP_FASTOPEN_CONNECT.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
There are other socket options that need to act only on the first
subflow, e.g. all TCP_FASTOPEN* socket options.
This is similar to the getsockopt version.
In the next commit, this new mptcp_setsockopt_first_sf_only() helper is
used by other another option.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Kuniyuki Iwashima says:
====================
soreuseport: Fix broken SO_INCOMING_CPU.
setsockopt(SO_INCOMING_CPU) for UDP/TCP is broken since 4.5/4.6 due to
these commits:
* e32ea7e74727 ("soreuseport: fast reuseport UDP socket selection")
* c125e80b8868 ("soreuseport: fast reuseport TCP socket selection")
These commits introduced the O(1) socket selection algorithm and removed
O(n) iteration over the list, but it ignores the score calculated by
compute_score(). As a result, it caused two misbehaviours:
* Unconnected sockets receive packets sent to connected sockets
* SO_INCOMING_CPU does not work
The former is fixed by commit acdcecc61285 ("udp: correct reuseport
selection with connected sockets"). This series fixes the latter and
adds some tests for SO_INCOMING_CPU.
====================
Link: https://lore.kernel.org/r/20221021204435.4259-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Some highly optimised applications use SO_INCOMING_CPU to make them
efficient, but they didn't test if it's working correctly by getsockopt()
to avoid slowing down. As a result, no one noticed it had been broken
for years, so it's a good time to add a test to catch future regression.
The test does
1) Create $(nproc) TCP listeners associated with each CPU.
2) Create 32 child sockets for each listener by calling
sched_setaffinity() for each CPU.
3) Check if accept()ed sockets' sk_incoming_cpu matches
listener's one.
If we see -EAGAIN, SO_INCOMING_CPU is broken. However, we might not see
any error even if broken; the kernel could miraculously distribute all SYN
to correct listeners. Not to let that happen, we must increase the number
of clients and CPUs to some extent, so the test requires $(nproc) >= 2 and
creates 64 sockets at least.
Test:
$ nproc
96
$ ./so_incoming_cpu
Before the previous patch:
# Starting 12 tests from 5 test cases.
# RUN so_incoming_cpu.before_reuseport.test1 ...
# so_incoming_cpu.c:191:test1:Expected cpu (5) == i (0)
# test1: Test terminated by assertion
# FAIL so_incoming_cpu.before_reuseport.test1
not ok 1 so_incoming_cpu.before_reuseport.test1
...
# FAILED: 0 / 12 tests passed.
# Totals: pass:0 fail:12 xfail:0 xpass:0 skip:0 error:0
After:
# Starting 12 tests from 5 test cases.
# RUN so_incoming_cpu.before_reuseport.test1 ...
# so_incoming_cpu.c:199:test1:SO_INCOMING_CPU is very likely to be working correctly with 3072 sockets.
# OK so_incoming_cpu.before_reuseport.test1
ok 1 so_incoming_cpu.before_reuseport.test1
...
# PASSED: 12 / 12 tests passed.
# Totals: pass:12 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Kazuho Oku reported that setsockopt(SO_INCOMING_CPU) does not work
with setsockopt(SO_REUSEPORT) since v4.6.
With the combination of SO_REUSEPORT and SO_INCOMING_CPU, we could
build a highly efficient server application.
setsockopt(SO_INCOMING_CPU) associates a CPU with a TCP listener
or UDP socket, and then incoming packets processed on the CPU will
likely be distributed to the socket. Technically, a socket could
even receive packets handled on another CPU if no sockets in the
reuseport group have the same CPU receiving the flow.
The logic exists in compute_score() so that a socket will get a higher
score if it has the same CPU with the flow. However, the score gets
ignored after the blamed two commits, which introduced a faster socket
selection algorithm for SO_REUSEPORT.
This patch introduces a counter of sockets with SO_INCOMING_CPU in
a reuseport group to check if we should iterate all sockets to find
a proper one. We increment the counter when
* calling listen() if the socket has SO_INCOMING_CPU and SO_REUSEPORT
* enabling SO_INCOMING_CPU if the socket is in a reuseport group
Also, we decrement it when
* detaching a socket out of the group to apply SO_INCOMING_CPU to
migrated TCP requests
* disabling SO_INCOMING_CPU if the socket is in a reuseport group
When the counter reaches 0, we can get back to the O(1) selection
algorithm.
The overall changes are negligible for the non-SO_INCOMING_CPU case,
and the only notable thing is that we have to update sk_incomnig_cpu
under reuseport_lock. Otherwise, the race prevents transitioning to
the O(n) algorithm and results in the wrong socket selection.
cpu1 (setsockopt) cpu2 (listen)
+-----------------+ +-------------+
lock_sock(sk1) lock_sock(sk2)
reuseport_update_incoming_cpu(sk1, val)
.
| /* set CPU as 0 */
|- WRITE_ONCE(sk1->incoming_cpu, val)
|
| spin_lock_bh(&reuseport_lock)
| reuseport_grow(sk2, reuse)
| .
| |- more_socks_size = reuse->max_socks * 2U;
| |- if (more_socks_size > U16_MAX &&
| | reuse->num_closed_socks)
| | .
| | |- RCU_INIT_POINTER(sk1->sk_reuseport_cb, NULL);
| | `- __reuseport_detach_closed_sock(sk1, reuse)
| | .
| | `- reuseport_put_incoming_cpu(sk1, reuse)
| | .
| | | /* Read shutdown()ed sk1's sk_incoming_cpu
| | | * without lock_sock().
| | | */
| | `- if (sk1->sk_incoming_cpu >= 0)
| | .
| | | /* decrement not-yet-incremented
| | | * count, which is never incremented.
| | | */
| | `- __reuseport_put_incoming_cpu(reuse);
| |
| `- spin_lock_bh(&reuseport_lock)
|
|- spin_lock_bh(&reuseport_lock)
|
|- reuse = rcu_dereference_protected(sk1->sk_reuseport_cb, ...)
|- if (!reuse)
| .
| | /* Cannot increment reuse->incoming_cpu. */
| `- goto out;
|
`- spin_unlock_bh(&reuseport_lock)
Fixes: e32ea7e74727 ("soreuseport: fast reuseport UDP socket selection")
Fixes: c125e80b8868 ("soreuseport: fast reuseport TCP socket selection")
Reported-by: Kazuho Oku <kazuhooku@gmail.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Alex Elder says:
====================
net: ipa: validation cleanup
This series gathers a set of IPA driver cleanups, mostly involving
code that ensures certain things are known to be correct *early*
(either at build or initializatin time), so they can be assumed good
during normal operation.
The first removes three constant symbols, by making a (reasonable)
assumption that a routing table consists of entries for the modem
followed by entries for the AP, with no unused entries between them.
The second removes two checks that are redundant (they verify the
sizes of two memory regions are in range, which will have been done
earlier for all regions).
The third adds some new checks to routing and filter tables that
can be done at "init time" (without requiring any access to IPA
hardware).
The fourth moves a check that routing and filter table addresses can
be encoded within certain IPA immediate commands, so it's performed
earlier; the checks can be done without touching IPA hardware. The
fifth moves some other command-related checks earlier, for the same
reason.
The sixth removes the definition ipa_table_valid(), because what it
does has become redundant. Finally, the last patch moves two more
validation calls so they're done very early in the probe process.
This will be required by some upcoming patches, which will record
the size of the routing and filter tables at this time so they're
available for subsequent initialization.
====================
Link: https://lore.kernel.org/r/20221021191340.4187935-1-elder@linaro.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Verify that the sizes of the routing and filter table memory regions
are valid as part of memory initialization, rather than waiting for
table initialization. The main reason to do this is that upcoming
patches use these memory region sizes to determine the number of
entries in these tables, and we'll want to know these sizes are good
sooner.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
What ipa_table_valid() (and ipa_table_valid_one(), which it calls)
does is ensure that the memory regions that hold routing and filter
tables have reasonable size. Specifically, it checks that the size
of a region is sufficient (or rather, exactly the right size) to
hold the maximum number of entries supported by the driver. (There
is an additional check that's erroneous, but in practice it is never
reached.)
Recently ipa_table_mem_valid() was added, which is called by
ipa_table_init(). That function verifies that all table memory
regions are of sufficient size, and requires hashed tables to have
zero size if hashing is not supported. It only ensures the filter
table is large enough to hold the number of endpoints that support
filtering, but that is adequate.
Therefore everything that ipa_table_valid() does is redundant, so
get rid of it.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, ipa_cmd_data_valid() is called by ipa_mem_config().
Nothing it does requires access to hardware though, so it can be
done during the init phase of IPA driver startup.
Create a new function ipa_cmd_init(), whose purpose is to do early
initialization related to IPA immediate commands. It will call the
build-time validation function, then will make the two calls made
previously by ipa_cmd_data_valid(). This make ipa_cmd_data_valid()
unnecessary, so get rid of it.
Rename ipa_cmd_header_valid() to be ipa_cmd_header_init_local_valid(),
so its name is clearer about which IPA immediate command it is
associated with.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
We currently verify the table size and offset fit in the immediate
command fields that must encode them in ipa_table_valid_one(). We
can now make this check earlier, in ipa_table_mem_valid().
The non-hashed IPv4 filter and route tables will always exist, and
their sizes will match the IPv6 tables, as well as the hashed tables
(if supported). So it's sufficient to verify the offset and size of
the IPv4 non-hashed tables fit into these fields.
Rename the function ipa_cmd_table_init_valid(), to reinforce that
it is the TABLE_INIT immediate command fields we're checking.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add checks in ipa_table_init() to ensure the memory regions defined
for IPA filter and routing tables are valid.
For routing tables, the checks ensure:
- The non-hashed IPv4 and IPv6 routing tables are defined
- The non-hashed IPv4 and IPv6 routing tables are the same size
- The number entries in the non-hashed IPv4 routing table is enough
to hold the number entries available to the modem, plus at least
one usable by the AP.
For filter tables, the checks ensure:
- The non-hashed IPv4 and IPv6 filter tables are defined
- The non-hashed IPv4 and IPv6 filter tables are the same size
- The number entries in the non-hashed IPv4 filter table is enough
to hold the endpoint bitmap, plus an entry for each defined
endpoint that supports filtering.
In addition, for both routing and filter tables:
- If hashing isn't supported (IPA v4.2), hashed tables are zero size
- If hashing *is* supported, all hashed tables are the same size as
their non-hashed counterparts.
When validating the size of routing tables, require the AP to have
at least one entry (in addition to those used by the modem).
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
There's no need to ensure table memory regions fit within the
IPA-local memory range. And there's no need to ensure the modem
header memory region is in range either. These are verified for all
memory regions in ipa_mem_size_valid(), once we have settled on the
size of IPA memory.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The entries in each IPA routing table are divided between the modem
and the AP. The modem always gets some number of entries located at
the base of the table; the AP gets all those that follow.
There's no reason to think the modem will use anything different
from the first entries in a routing table, so:
- Get rid of IPA_ROUTE_MODEM_MIN (just assume it's 0)
- Get rid of IPA_ROUTE_AP_MIN (just assume it's IPA_ROUTE_MODEM_COUNT)
And finally:
- Open-code IPA_ROUTE_AP_COUNT and remove its definition
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
RK3588(s) can have multiple gmac controllers.
Re-use rk3568 logic to distinguish them.
Fixes: 2f2b60a0ec28 ("net: ethernet: stmmac: dwmac-rk: Add gmac support for rk3588")
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20221021172422.88534-1-sebastian.reichel@collabora.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Amritha Nambiar says:
====================
Extend action skbedit to RX queue mapping
Based on the discussion on
https://lore.kernel.org/netdev/166260012413.81018.8010396115034847972.stgit@anambiarhost.jf.intel.com/ ,
the following series extends skbedit tc action to RX queue mapping.
Currently, skbedit action in tc allows overriding of transmit queue.
Extending this ability of skedit action supports the selection of
receive queue for incoming packets. On the receive side, this action
is supported only in hardware, so the skip_sw flag is enforced.
Enabled ice driver to offload this type of filter into the hardware
for accepting packets to the device's receive queue.
====================
Link: https://lore.kernel.org/r/166633888716.52141.3425659377117969638.stgit@anambiarhost.jf.intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add tc-queue-filters.rst with notes on TC filters for
selecting a set of queues and/or a queue.
Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This patch uses TC skbedit queue_mapping action to support
forwarding packets to a device queue. Such filters with action
forward to queue will be the highest priority switch filter in
HW.
Example:
$ tc filter add dev ens4f0 protocol ip ingress flower\
dst_ip 192.168.1.12 ip_proto tcp dst_port 5001\
action skbedit queue_mapping 5 skip_sw
The above command adds an ingress filter, incoming packets
qualifying the match will be accepted into queue 5. The queue
number is in decimal format.
Refactored ice_add_tc_flower_adv_fltr() to consolidate code with
action FWD_TO_VSI and FWD_TO QUEUE.
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add support for skbedit queue mapping action on receive
side. This is supported only in hardware, so the skip_sw
flag is enforced. This enables offloading filters for
receive queue selection in the hardware using the
skbedit action. Traffic arrives on the Rx queue requested
in the skbedit action parameter. A new tc action flag
TCA_ACT_FLAGS_AT_INGRESS is introduced to identify the
traffic direction the action queue_mapping is requested
on during filter addition. This is used to disallow
offloading the skbedit queue mapping action on transmit
side.
Example:
$tc filter add dev $IFACE ingress protocol ip flower dst_ip $DST_IP\
action skbedit queue_mapping $rxq_id skip_sw
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This is a re-do of commit e0e0747de0ea ("scsi: mpt3sas: Fix return value
check of dma_get_required_mask()"), which I ended up undoing in a
mis-merge in commit 62e6e5940c0c ("Merge tag 'scsi-misc' of
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi").
The original commit message was
scsi: mpt3sas: Fix return value check of dma_get_required_mask()
Fix the incorrect return value check of dma_get_required_mask(). Due to
this incorrect check, the driver was always setting the DMA mask to 63 bit.
Link: https://lore.kernel.org/r/20220913120538.18759-2-sreekanth.reddy@broadcom.com
Fixes: ba27c5cf286d ("scsi: mpt3sas: Don't change the DMA coherent mask after allocations")
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
and this fix was lost when I mis-merged the conflict with commit
9df650963bf6 ("scsi: mpt3sas: Don't change DMA mask while reallocating
pools").
Reported-by: Juergen Gross <jgross@suse.com>
Fixes: 62e6e5940c0c ("Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi")
Link: https://lore.kernel.org/all/CAHk-=wjaK-TxrNaGtFDpL9qNHL1MVkWXO1TT6vObD5tXMSC4Zg@mail.gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In mcp251x_can_probe(), if mcp251x_gpio_setup() fails, it forgets to
unregister the CAN device.
Fix this by unregistering can device in mcp251x_can_probe().
Fixes: 2d52dabbef60 ("can: mcp251x: add GPIO support")
Signed-off-by: Dongliang Mu <dzm91@hust.edu.cn>
Link: https://lore.kernel.org/all/20221024090256.717236-1-dzm91@hust.edu.cn
[mkl: adjust label]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The commit 1149108e2fbf ("can: mscan: improve clock API use") only
adds put_clock() in mpc5xxx_can_remove() function, forgetting to add
put_clock() in the error handling code.
Fix this bug by adding put_clock() in the error handling code.
Fixes: 1149108e2fbf ("can: mscan: improve clock API use")
Signed-off-by: Dongliang Mu <dzm91@hust.edu.cn>
Link: https://lore.kernel.org/all/20221024133828.35881-1-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan
Stefan Schmidt says:
====================
pull-request: ieee802154 for net 2022-10-24
Two fixup patches for return code changes of an earlier commit.
Wei Yongjun fixed a missed -EINVAL return on the recent change, while
Alexander Aring adds handling for unknown address type cases as well.
Miquel Raynal fixed a long standing issue with LQI value recording
which got broken 8 years ago. (It got more attention with the work
in progress enhancement in wpan).
* tag 'ieee802154-for-net-2022-10-24' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan:
mac802154: Fix LQI recording
net: ieee802154: fix error return code in dgram_bind()
net: ieee802154: return -EINVAL for unknown addr type
====================
Link: https://lore.kernel.org/r/20221024102301.9433-1-stefan@datenfreihafen.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Mat Martineau says:
====================
mptcp: Fixes for 6.1
Patch 1 fixes an issue with assigning subflow IDs in cases where an
incoming MP_JOIN is processed before accept() completes on the MPTCP
socket.
Patches 2 and 3 fix a deadlock issue with fastopen code (new for 6.1) at
connection time.
====================
Link: https://lore.kernel.org/r/20221021225856.88119-1-mathew.j.martineau@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Our CI reported lockdep splat in the fastopen code:
======================================================
WARNING: possible circular locking dependency detected
6.0.0.mptcp_f5e8bfe9878d+ #1558 Not tainted
------------------------------------------------------
packetdrill/1071 is trying to acquire lock:
ffff8881bd198140 (sk_lock-AF_INET){+.+.}-{0:0}, at: inet_wait_for_connect+0x19c/0x310
but task is already holding lock:
ffff8881b8346540 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_sendmsg+0xfdf/0x1740
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (k-sk_lock-AF_INET){+.+.}-{0:0}:
__lock_acquire+0xb6d/0x1860
lock_acquire+0x1d8/0x620
lock_sock_nested+0x37/0xd0
inet_stream_connect+0x3f/0xa0
mptcp_connect+0x411/0x800
__inet_stream_connect+0x3ab/0x800
mptcp_stream_connect+0xac/0x110
__sys_connect+0x101/0x130
__x64_sys_connect+0x6e/0xb0
do_syscall_64+0x59/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
-> #0 (sk_lock-AF_INET){+.+.}-{0:0}:
check_prev_add+0x15e/0x2110
validate_chain+0xace/0xdf0
__lock_acquire+0xb6d/0x1860
lock_acquire+0x1d8/0x620
lock_sock_nested+0x37/0xd0
inet_wait_for_connect+0x19c/0x310
__inet_stream_connect+0x26c/0x800
tcp_sendmsg_fastopen+0x341/0x650
mptcp_sendmsg+0x109d/0x1740
sock_sendmsg+0xe1/0x120
__sys_sendto+0x1c7/0x2a0
__x64_sys_sendto+0xdc/0x1b0
do_syscall_64+0x59/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(k-sk_lock-AF_INET);
lock(sk_lock-AF_INET);
lock(k-sk_lock-AF_INET);
lock(sk_lock-AF_INET);
*** DEADLOCK ***
1 lock held by packetdrill/1071:
#0: ffff8881b8346540 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_sendmsg+0xfdf/0x1740
======================================================
The problem is caused by the blocking inet_wait_for_connect() releasing
and re-acquiring the msk socket lock while the subflow socket lock is
still held and the MPTCP socket requires that the msk socket lock must
be acquired before the subflow socket lock.
Address the issue always invoking tcp_sendmsg_fastopen() in an
unblocking manner, and later eventually complete the blocking
__inet_stream_connect() as needed.
Fixes: d98a82a6afc7 ("mptcp: handle defer connect in mptcp_sendmsg")
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The current MPTCP connect implementation duplicates a bit of inet
code and does not use nor provide a struct proto->connect callback,
which in turn will not fit the upcoming fastopen implementation.
Refactor such implementation to use the common helper, moving the
MPTCP-specific bits into mptcp_connect(). Additionally, avoid an
indirect call to the subflow connect callback.
Note that the fastopen call-path invokes mptcp_connect() while already
holding the subflow socket lock. Explicitly keep track of such path
via a new MPTCP-level flag and handle the locking accordingly.
Additionally, track the connect flags in a new msk field to allow
propagating them to the subflow inet_stream_connect call.
Fixes: d98a82a6afc7 ("mptcp: handle defer connect in mptcp_sendmsg")
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The mptcp_pm_nl_get_local_id() code assumes that the msk local address
is available at that point. For passive sockets, we initialize such
address at accept() time.
Depending on the running configuration and the user-space timing, a
passive MPJ subflow can join the msk socket before accept() completes.
In such case, the PM assigns a wrong local id to the MPJ subflow
and later PM netlink operations will end-up touching the wrong/unexpected
subflow.
All the above causes sporadic self-tests failures, especially when
the host is heavy loaded.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/308
Fixes: 01cacb00b35c ("mptcp: add netlink-based PM")
Fixes: d045b9eb95a9 ("mptcp: introduce implicit endpoints")
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Russell King says:
====================
net: sfp: improve high power module implementation
This series aims to improve the power level switching between standard
level 1 and the higher power levels.
The first patch updates the DT binding documentation to include the
minimum and default of 1W, which is the base level that every SFP cage
must support. Hence, it makes sense to document this in the binding.
The second patch enforces a minimum of 1W when parsing the firmware
description, and optimises the code for that case; there's no need to
check for SFF8472 compliance since we will not need to touch the
A2h registers.
Patch 3 validates that the module supports SFF-8472 rev 10.2 before
checking for power level 2 - rev 10.2 is where support for power
levels was introduced, so if the module doesn't support this revision,
it doesn't support power levels. Setting the power level 2 declaration
bit is likely to be spurious.
Patch 4 does the same for power level 3, except this was introduced in
SFF-8472 rev 11.9. The revision code was never updated, so we use the
rev 11.4 to signify this.
Patch 5 cleans up the code - rather than using BIT(0), we now use a
properly named value for the power level select bit.
Patch 6 introduces a read-modify-write helper.
Patch 7 gets rid of the DM7052 hack (which sets a power level
declaration bit but is not compatible with SFF-8472 rev 10.2, and
the module does not implement the A2h I2C address.)
Series tested with my DM7052.
v2: update sff.sfp.yaml with Rob's feedback
====================
Andrew's review tags from v1.
Link: https://lore.kernel.org/r/Y0%2F7dAB8OU3jrbz6@shell.armlinux.org.uk
Link: https://lore.kernel.org/r/Y1K17UtfFopACIi2@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since we no longer mis-detect high-power mode with the DM7052 module,
we no longer need the hack in sfp_module_enable_high_power(), and can
now switch this to use sfp_modify_u8().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a helper to modify bits in a single byte in memory space, and use
it when updating the soft tx-disable flag in the module.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Provide a named definition for the power level select bit in the
extended status register, rather than using BIT(0) in the code.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Power level 3 was included in SFF-8472 revision 11.9, but this does
not have a compliance code. Use revision 11.4 as the minimum
compliance level instead.
This should avoid any spurious indication of 2W modules.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Power level 2 was introduced by SFF-8472 revision 10.2. Ignore
the power declaration bit for modules that are not compliant with
at least this revision.
This should remove any spurious indication of 1.5W modules.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Check that the firmware provided maximum power is at least 1W, which
is the minimum power level for any SFP module.
Now that we enforce the minimum of 1W, we can exit early from
sfp_module_parse_power() if the module power is 1W or less.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a minimum and default for the maximum-power-milliwatt option;
module power levels were originally up to 1W, so this is the default
and the minimum power level we can have for a functional SFP cage.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When a frame is sent using FDMA, the skb is mapped and then the mapped
address is given to an tx dcb that is different than the last used tx
dcb. Once the HW finish with this frame, it would generate an interrupt
and then the dcb can be reused and memory can be freed. For each dcb
there is an dcb buf that contains some meta-data(is used by PTP, is
it free). There is 1 to 1 relationship between dcb and dcb_buf.
The following issue was observed. That sometimes after changing the MTU
to allocate new tx dcbs and dcbs_buf, two frames were not
transmitted. The frames were not transmitted because when reloading the
tx dcbs, it was always presuming to use the first dcb but that was not
always happening. Because it could be that the last tx dcb used before
changing MTU was first dcb and then when it tried to get the next dcb it
would take dcb 1 instead of 0. Because it is supposed to take a
different dcb than the last used one. This can be fixed simply by
changing tx->last_in_use to -1 when the fdma is disabled to reload the
new dcb and dcbs_buff.
But there could be a different issue. For example, right after the frame
is sent, the MTU is changed. Now all the dcbs and dcbs_buf will be
cleared. And now get the interrupt from HW that it finished with the
frame. So when we try to clear the skb, it is not possible because we
lost all the dcbs_buf.
The solution here is to stop replacing the tx dcbs and dcbs_buf when
changing MTU because the TX doesn't care what is the MTU size, it is
only the RX that needs this information.
Fixes: 2ea1cbac267e ("net: lan966x: Update FDMA to change MTU.")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20221021090711.3749009-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Michael Chan says:
====================
bnxt_en: Driver updates
This patchset adds .get_module_eeprom_by_page() support and adds
an NVRAM resize step to allow larger firmware images to be flashed
to older firmware.
====================
Link: https://lore.kernel.org/r/1666334243-23866-1-git-send-email-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Resize of the UPDATE entry is required if the image to
be flashed is larger than the available space. Add this step,
otherwise flashing larger firmware images by ethtool or devlink
may fail.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for .get_module_eeprom_by_page() callback which
implements generic solution for module`s eeprom access.
v3: Add bnxt_get_module_status() to get a more specific extack error
string.
Return -EINVAL from bnxt_get_module_eeprom_by_page() when we
don't want to fallback to old method.
v2: Simplification suggested by Ido Schimmel
Link: https://lore.kernel.org/netdev/YzVJ%2FvKJugoz15yV@shredder/
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The main changes are PTM timestamp support, CMIS EEPROM support, and
asymmetric CoS queues support.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To keep backward compatibility we used to leave attribute parsing
to the family if no policy is specified. This becomes tedious as
we move to more strict validation. Families must define reject all
policies if they don't want any attributes accepted.
Piggy back on the resv_start_op field as the switchover point.
AFAICT only ethtool has added new commands since the resv_start_op
was defined, and it has per-op policies so this should be a no-op.
Nonetheless the patch should still go into v6.1 for consistency.
Link: https://lore.kernel.org/all/20221019125745.3f2e7659@kernel.org/
Link: https://lore.kernel.org/r/20221021193532.1511293-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The similar fix as commit 46cdedf2a0fa ("ethtool: pse-pd: fix null-deref on
genl_info in dump") is also needed for ethtool eeprom.
Fixes: c781ff12a2f3 ("ethtool: Allow network drivers to dump arbitrary EEPROM data")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/5575919a2efc74cd9ad64021880afc3805c54166.1666362167.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Adding on the kernel command line "ftrace=function" triggered:
CPA detected W^X violation: 8000000000000063 -> 0000000000000063 range: 0xffffffffc0013000 - 0xffffffffc0013fff PFN 10031b
WARNING: CPU: 0 PID: 0 at arch/x86/mm/pat/set_memory.c:609
verify_rwx+0x61/0x6d
Call Trace:
__change_page_attr_set_clr+0x146/0x8a6
change_page_attr_set_clr+0x135/0x268
change_page_attr_clear.constprop.0+0x16/0x1c
set_memory_x+0x2c/0x32
arch_ftrace_update_trampoline+0x218/0x2db
ftrace_update_trampoline+0x16/0xa1
__register_ftrace_function+0x93/0xb2
ftrace_startup+0x21/0xf0
register_ftrace_function_nolock+0x26/0x40
register_ftrace_function+0x4e/0x143
function_trace_init+0x7d/0xc3
tracer_init+0x23/0x2c
tracing_set_tracer+0x1d5/0x206
register_tracer+0x1c0/0x1e4
init_function_trace+0x90/0x96
early_trace_init+0x25c/0x352
start_kernel+0x424/0x6e4
x86_64_start_reservations+0x24/0x2a
x86_64_start_kernel+0x8c/0x95
secondary_startup_64_no_verify+0xe0/0xeb
This is because at boot up, kernel text is writable, and there's no
reason to do tricks to updated it. But the verifier does not
distinguish updates at boot up and at run time, and causes a warning at
time of boot.
Add a check for system_state == SYSTEM_BOOTING and allow it if that is
the case.
[ These SYSTEM_BOOTING special cases are all pretty horrid, but the x86
text_poke() code does some odd things at bootup, forcing this for now
- Linus ]
Link: https://lore.kernel.org/r/20221024112730.180916b3@gandalf.local.home
Fixes: 652c5bf380ad0 ("x86/mm: Refuse W^X violations")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
include/linux/net.h
a5ef058dc4d9 ("net: introduce and use custom sockopt socket flag")
e993ffe3da4b ("net: flag sockets supporting msghdr originated zerocopy")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf.
The net-memcg fix stands out, the rest is very run-off-the-mill. Maybe
I'm biased.
Current release - regressions:
- eth: fman: re-expose location of the MAC address to userspace,
apparently some udev scripts depended on the exact value
Current release - new code bugs:
- bpf:
- wait for busy refill_work when destroying bpf memory allocator
- allow bpf_user_ringbuf_drain() callbacks to return 1
- fix dispatcher patchable function entry to 5 bytes nop
Previous releases - regressions:
- net-memcg: avoid stalls when under memory pressure
- tcp: fix indefinite deferral of RTO with SACK reneging
- tipc: fix a null-ptr-deref in tipc_topsrv_accept
- eth: macb: specify PHY PM management done by MAC
- tcp: fix a signed-integer-overflow bug in tcp_add_backlog()
Previous releases - always broken:
- eth: amd-xgbe: SFP fixes and compatibility improvements
Misc:
- docs: netdev: offer performance feedback to contributors"
* tag 'net-6.1-rc3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (37 commits)
net-memcg: avoid stalls when under memory pressure
tcp: fix indefinite deferral of RTO with SACK reneging
tcp: fix a signed-integer-overflow bug in tcp_add_backlog()
net: lantiq_etop: don't free skb when returning NETDEV_TX_BUSY
net: fix UAF issue in nfqnl_nf_hook_drop() when ops_init() failed
docs: netdev: offer performance feedback to contributors
kcm: annotate data-races around kcm->rx_wait
kcm: annotate data-races around kcm->rx_psock
net: fman: Use physical address for userspace interfaces
net/mlx5e: Cleanup MACsec uninitialization routine
atlantic: fix deadlock at aq_nic_stop
nfp: only clean `sp_indiff` when application firmware is unloaded
amd-xgbe: add the bit rate quirk for Molex cables
amd-xgbe: fix the SFP compliance codes check for DAC cables
amd-xgbe: enable PLL_CTL for fixed PHY modes only
amd-xgbe: use enums for mailbox cmd and sub_cmds
amd-xgbe: Yellow carp devices do not need rrc
bpf: Use __llist_del_all() whenever possbile during memory draining
bpf: Wait for busy refill_work when destroying bpf memory allocator
MAINTAINERS: add keyword match on PTP
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU fix from Paul McKenney:
"Fix a regression caused by commit bf95b2bc3e42 ("rcu: Switch polled
grace-period APIs to ->gp_seq_polled"), which could incorrectly leave
interrupts enabled after an early-boot call to synchronize_rcu().
Such synchronize_rcu() calls must acquire leaf rcu_node locks in order
to properly interact with polled grace periods, but the code did not
take into account the possibility of synchronize_rcu() being invoked
from the portion of the boot sequence during which interrupts are
disabled.
This commit therefore switches the lock acquisition and release from
irq to irqsave/irqrestore"
* tag 'rcu-urgent.2022.10.20a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
rcu: Keep synchronize_rcu() from enabling irqs in early boot
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit fixes from Shuah Khan:
"One single fix to update alloc_string_stream() callers to check for
IS_ERR() instead of NULL to be in sync with alloc_string_stream()
returning an ERR_PTR()"
* tag 'linux-kselftest-kunit-fixes-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: update NULL vs IS_ERR() tests
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fixes from Shuah Khan:
- futex, intel_pstate, kexec build fixes
- ftrace dynamic_events dependency check fix
- memory-hotplug fix to remove redundant warning from test report
* tag 'linux-kselftest-fixes-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/ftrace: fix dynamic_events dependency check
selftests/memory-hotplug: Remove the redundant warning information
selftests/kexec: fix build for ARCH=x86_64
selftests/intel_pstate: fix build for ARCH=x86_64
selftests/futex: fix build for clang
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Fix typos in UART1 and MMC in the Ingenic driver
- A really well researched glitch bug fix to the Qualcomm driver that
was tracked down and fixed by Dough Anderson from Chromium. Hats off
for this one!
- Revert two patches on the Xilinx ZynqMP driver: this needs a proper
solution making use of firmware version information to adapt to
different firmware releases
- Fix interrupt triggers in the Ocelot driver
* tag 'pinctrl-v6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: ocelot: Fix incorrect trigger of the interrupt.
Revert "dt-bindings: pinctrl-zynqmp: Add output-enable configuration"
Revert "pinctrl: pinctrl-zynqmp: Add support for output-enable and bias-high-impedance"
pinctrl: qcom: Avoid glitching lines when we first mux to output
pinctrl: Ingenic: JZ4755 bug fixes
|
|
As Shakeel explains the commit under Fixes had the unintended
side-effect of no longer pre-loading the cached memory allowance.
Even tho we previously dropped the first packet received when
over memory limit - the consecutive ones would get thru by using
the cache. The charging was happening in batches of 128kB, so
we'd let in 128kB (truesize) worth of packets per one drop.
After the change we no longer force charge, there will be no
cache filling side effects. This causes significant drops and
connection stalls for workloads which use a lot of page cache,
since we can't reclaim page cache under GFP_NOWAIT.
Some of the latency can be recovered by improving SACK reneg
handling but nowhere near enough to get back to the pre-5.15
performance (the application I'm experimenting with still
sees 5-10x worst latency).
Apply the suggested workaround of using GFP_ATOMIC. We will now
be more permissive than previously as we'll drop _no_ packets
in softirq when under pressure. But I can't think of any good
and simple way to address that within networking.
Link: https://lore.kernel.org/all/20221012163300.795e7b86@kernel.org/
Suggested-by: Shakeel Butt <shakeelb@google.com>
Fixes: 4b1327be9fe5 ("net-memcg: pass in gfp_t mask to mem_cgroup_charge_skmem()")
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Link: https://lore.kernel.org/r/20221021160304.1362511-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
