summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2011-07-08FS-Cache: Add a helper to bulk uncache pages on an inodeDavid Howells5-5/+85
Add an FS-Cache helper to bulk uncache pages on an inode. This will only work for the circumstance where the pages in the cache correspond 1:1 with the pages attached to an inode's page cache. This is required for CIFS and NFS: When disabling inode cookie, we were returning the cookie and setting cifsi->fscache to NULL but failed to invalidate any previously mapped pages. This resulted in "Bad page state" errors and manifested in other kind of errors when running fsstress. Fix it by uncaching mapped pages when we disable the inode cookie. This patch should fix the following oops and "Bad page state" errors seen during fsstress testing. ------------[ cut here ]------------ kernel BUG at fs/cachefiles/namei.c:201! invalid opcode: 0000 [#1] SMP Pid: 5, comm: kworker/u:0 Not tainted 2.6.38.7-30.fc15.x86_64 #1 Bochs Bochs RIP: 0010: cachefiles_walk_to_object+0x436/0x745 [cachefiles] RSP: 0018:ffff88002ce6dd00 EFLAGS: 00010282 RAX: ffff88002ef165f0 RBX: ffff88001811f500 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000100 RDI: 0000000000000282 RBP: ffff88002ce6dda0 R08: 0000000000000100 R09: ffffffff81b3a300 R10: 0000ffff00066c0a R11: 0000000000000003 R12: ffff88002ae54840 R13: ffff88002ae54840 R14: ffff880029c29c00 R15: ffff88001811f4b0 FS: 00007f394dd32720(0000) GS:ffff88002ef00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007fffcb62ddf8 CR3: 000000001825f000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process kworker/u:0 (pid: 5, threadinfo ffff88002ce6c000, task ffff88002ce55cc0) Stack: 0000000000000246 ffff88002ce55cc0 ffff88002ce6dd58 ffff88001815dc00 ffff8800185246c0 ffff88001811f618 ffff880029c29d18 ffff88001811f380 ffff88002ce6dd50 ffffffff814757e4 ffff88002ce6dda0 ffffffff8106ac56 Call Trace: cachefiles_lookup_object+0x78/0xd4 [cachefiles] fscache_lookup_object+0x131/0x16d [fscache] fscache_object_work_func+0x1bc/0x669 [fscache] process_one_work+0x186/0x298 worker_thread+0xda/0x15d kthread+0x84/0x8c kernel_thread_helper+0x4/0x10 RIP cachefiles_walk_to_object+0x436/0x745 [cachefiles] ---[ end trace 1d481c9af1804caa ]--- I tested the uncaching by the following means: (1) Create a big file on my NFS server (104857600 bytes). (2) Read the file into the cache with md5sum on the NFS client. Look in /proc/fs/fscache/stats: Pages : mrk=25601 unc=0 (3) Open the file for read/write ("bash 5<>/warthog/bigfile"). Look in proc again: Pages : mrk=25601 unc=25601 Reported-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-and-Tested-by: Suresh Jayaraman <sjayaraman@suse.de> cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-08drm/i915: use pipe bpp in DP link bandwidth calculationJesse Barnes1-5/+7
Now that we track bpp on a per-pipe basis, we can use the actual value rather than assuming 24bpp. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-07-08drm/i915: check for supported depth at fb init timeJesse Barnes1-0/+5
This will catch bad fb configs earlier. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-07-08drm: bpp and depth changes require full mode setsJesse Barnes1-0/+5
To properly drive a framebuffer with a new depth or bpp, dither settings and link bandwidth calculations may change, so make sure we go through a full mode set in that case. Reported-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-07-08drm/i915: use pipe bpp when setting HDMI bpcJesse Barnes1-0/+5
The Intel HDMI encoder can support 8bpc or 12bpc. Set the appropriate value based on the pipe bpp when configuring the output. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-07-08drm/i915: use pipe bpp in DP link bandwidth calculationsJesse Barnes1-3/+2
The pipe may be driving various bpp values depending on the display configuration, so take that into account when calculating link bandwidth requirements. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-07-08drm/i915: split out plane update codeJesse Barnes2-9/+100
Updating the planes is device specific, so create a new display callback and use it in pipe_set_base. (In fact we could go even further, valid display plane bits have changed with each generation, as has tiled buffer handling.) Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-07-08drm/i915: split out Ironlake pipe bpp picking codeJesse Barnes2-42/+153
Figuring out which pipe bpp to use is a bit painful. It depends on both the encoder and display configuration attached to a pipe. For instance, to drive a 24bpp framebuffer out to an 18bpp panel, we need to use 6bpc on the pipe but also enable dithering. But driving that same framebuffer to a DisplayPort output on another pipe means using 8bpc and no dithering. So split out and enhance the code to handle the various cases, returning an appropriate pipe bpp as well as whether dithering should be enabled. Save the resulting pipe bpp in the intel_crtc struct for use by encoders in calculating bandwidth requirements (defaults to 24bpp on pre-ILK). Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-07-08drm/i915: set bpc for DP transcoderJesse Barnes1-1/+2
This may not be the default value, so pull the bpc out of the pipe reg and write it to the DP transcoder so proper dithering and signaling occurs. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-07-08drm/i915: don't set transcoder bpc on CougarPointJesse Barnes1-6/+9
This prevents us from setting reserved or incorrect bits on CougarPoint. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-07-08[media] tuner-core.c: don't change type field in g_tuner or g_frequencyHans Verkuil1-19/+19
The tuner core should not silently change the type field in g_tuner and g_frequency. If the tuner is in a different mode than the one that was requested, then just fill in what you can and don't attempt to read afc, signal or rxsubchans values. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-08drm/i915: don't set SDVO color range on ILK+Jesse Barnes1-1/+2
These bits are reserved on ILK+ (ILK+ provides this feature in the transcoder and pipe configuration instead, which we already set). Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-07-08Merge branch 'stable/bug.fixes' of ↵Linus Torvalds1-28/+28
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen * 'stable/bug.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/pci: Move check for acpi_sci_override_gsi to xen_setup_acpi_sci.
2011-07-08Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds6-3/+36
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Don't use the EFI reboot method by default x86, suspend: Restore MISC_ENABLE MSR in realmode wakeup x86, reboot: Acer Aspire One A110 reboot quirk x86-32, NUMA: Fix boot regression caused by NUMA init unification on highmem machines
2011-07-08Merge branches 'core-urgent-for-linus', 'perf-urgent-for-linus' and ↵Linus Torvalds5-17/+24
'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: debugobjects: Fix boot crash when kmemleak and debugobjects enabled * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: jump_label: Fix jump_label update for modules oprofile, x86: Fix race in nmi handler while starting counters * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: Disable (revert) SCHED_LOAD_SCALE increase sched, cgroups: Fix MIN_SHARES on 64-bit boxen
2011-07-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds37-165/+256
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (31 commits) sctp: fix missing send up SCTP_SENDER_DRY_EVENT when subscribe it net: refine {udp|tcp|sctp}_mem limits vmxnet3: round down # of queues to power of two net: sh_eth: fix the parameter for the ETHER of SH7757 net: sh_eth: fix cannot work half-duplex mode net: vlan: enable soft features regardless of underlying device vmxnet3: fix starving rx ring whenoc_skb kb fails bridge: Always flood broadcast packets greth: greth_set_mac_add would corrupt the MAC address. net: bind() fix error return on wrong address family natsemi: silence dma-debug warnings net: 8139too: Initial necessary vlan_features to support vlan Fix call trace when interrupts are disabled while sleeping function kzalloc is called qlge:Version change to v1.00.00.29 qlge: Fix printk priority so chip fatal errors are always reported. qlge:Fix crash caused by mailbox execution on wedged chip. xfrm4: Don't call icmp_send on local error ipv4: Don't use ufo handling on later transformed packets xfrm: Remove family arg from xfrm_bundle_ok ipv6: Don't put artificial limit on routing table size. ...
2011-07-07[media] cx18/ivtv: fix g_tuner supportHans Verkuil2-12/+4
The driver shouldn't override vt->type, and the tuner name should be based on vt->type as well. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-07[media] tuner-core: power up tuner when called with s_power(1)Hans Verkuil1-3/+7
Drivers must be able to rely on s_power to power up subdevices. Note that at this moment no driver attempts to power up tuners. This probably isn't surprising since s_power(1) was never implemented in tuner-core.c until now. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-07[media] v4l2-ioctl.c: check for valid tuner type in S_HW_FREQ_SEEKHans Verkuil1-3/+9
Prohibit attempts to change the tuner to a type that is different from the device node the ioctl is called from. I.e. the type must be RADIO for a radio node and ANALOG_TV for a video/vbi node. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-07[media] tuner-core: simplify the standard fixupHans Verkuil1-65/+28
Get rid of a number of unnecessary tuner_dbg messages by simplifying the std fixup function. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-07[media] tuner-core/v4l2-subdev: document that the type field has to be filled inHans Verkuil2-0/+36
The tuner ops g_frequency, g_tuner and s_tuner require that the tuner type field is filled in. Document this. The tuner-core doc is based on a patch from Mauro Carvalho Chehab <mchehab@redhat.com>. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-07[media] v4l2-subdev.h: remove unused s_mode tuner opHans Verkuil1-4/+1
s_mode is no longer used, so remove it. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-07[media] feature-removal-schedule: change in how radio device nodes are handledHans Verkuil1-0/+22
Radio devices have weird side-effects when used with combined TV/radio tuners and the V4L2 spec is ambiguous on how it should work. This results in inconsistent driver behavior which makes life hard for everyone. Be more strict in when and how the switch between radio and tv mode takes place and make sure all drivers behave the same. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-07[media] bttv: fix s_tuner for radioHans Verkuil1-1/+1
Fix typo: g_tuner should have been s_tuner. Tested with a bttv card. Cc: stable@kernel.org Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-07[media] pvrusb2: fix g/s_tuner supportHans Verkuil1-0/+4
The tuner-core subdev requires that the type field of v4l2_tuner is filled in correctly. This is done in v4l2-ioctl.c, but pvrusb2 doesn't use that yet, so we have to do it manually based on whether the current input is radio or not. Tested with my pvrusb2. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Mike Isely <isely@pobox.com> Cc: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-07[media] v4l2-ioctl.c: prefill tuner type for g_frequency and g/s_tunerHans Verkuil1-0/+6
The subdevs are supposed to receive a valid tuner type for the g_frequency and g/s_tuner subdev ops. Some drivers do this, others don't. So prefill this in v4l2-ioctl.c based on whether the device node from which this is called is a radio node or not. The spec does not require applications to fill in the type, and if they leave it at 0 then the 'check_mode' call in tuner-core.c will return an error and the ioctl does nothing. Cc: stable@kernel.org Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-07[media] tuner-core: fix tuner_resume: use t->mode instead of t->typeHans Verkuil1-1/+1
set_mode is called with t->type, which is the tuner type. Instead, use t->mode which is the actual tuner mode (i.e. radio vs tv). Cc: stable@kernel.org Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-07[media] tuner-core: fix s_std and s_tunerHans Verkuil1-28/+31
Both s_std and s_tuner are broken because set_mode_freq is called before the new std (for s_std) and audmode (for s_tuner) are set. This patch splits set_mode_freq in a set_mode and a set_freq and in s_std/s_tuner first calls set_mode, and if that returns 0 (i.e. the mode is supported) then they set t->std/t->audmode and call set_freq. This fixes a bug where changing std or audmode would actually change it to the previous value. Discovered while testing analog TV standards for cx18 with a tda18271 tuner. Cc: stable@kernel.org Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-07ASoC: ak4642: fixup snd_soc_update_bits mask for PW_MGMT2Kuninori Morimoto1-1/+1
mask didn't cover update-data Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-07-07xen/pci: Move check for acpi_sci_override_gsi to xen_setup_acpi_sci.Konrad Rzeszutek Wilk1-28/+28
Previously we would check for acpi_sci_override_gsi == gsi every time a PCI device was enabled. That works during early bootup, but later on it could lead to triggering unnecessarily the acpi_gsi_to_irq(..) lookup. The reason is that acpi_sci_override_gsi was declared in __initdata and after early bootup could contain bogus values. This patch moves the check for acpi_sci_override_gsi to the site where the ACPI SCI is preset. CC: stable@kernel.org Reported-by: Raghavendra D Prabhu <rprabhu@wnohang.net> Tested-by: Raghavendra D Prabhu <rprabhu@wnohang.net> [http://lists.xensource.com/archives/html/xen-devel/2011-07/msg00154.html] Suggested-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-07-07platform-drivers-x86: set backlight type to BACKLIGHT_PLATFORMAxel Lin2-0/+2
Some newly added drivers do not set backlight type, as a result /sys/class/backlight/<backlight>/type shows incorrect backlight type. Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Corentin Chary <corentin.chary@gmail.com> Cc: Yin Kangkai <kangkai.yin@intel.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-07-07thinkpad-acpi: handle HKEY 0x4010, 0x4011 eventsHenrique de Moraes Holschuh2-9/+37
Handle events 0x4010 and 0x4011 so that we do not pester users about them. These events report when the thinkpad is docked/undocked to a native hotplug dock (i.e. one that does not need ACPI handling, nor is represented in the ACPI device tree). Such docks are based on USB 2.0/3.0, and also work as port replicators. We really want a proper dock class to report these, or at least new input EV_SW events. Since it is not clear which one to use yet, keep reporting them as vendor-specific ThinkPad events. WARNING: As defined by the thinkpad-acpi sysfs ABI rules of engagement, the vendor-specific events will be REMOVED as soon as generic events are made available (duplicate events are a big problem), with an appropriate update to the thinkpad-acpi sysfs/event ABI versioning. Userspace is already prepared to provide easy backwards compatibility for such changes when convenient to the distro (see acpi-fakekey). * Event 0x4010: docking to hotplug dock/port replicator * Event 0x4011: undocking from hotplug dock/port replicator Typical usecase would be to trigger display reconfiguration. Reports mention T410, T510, and series 3 docks/port replicators. Special thanks to Robert de Rooy for his extensive report and analysis of the situation. http://www.thinkwiki.org/wiki/ThinkPad_Port_Replicator_Series_3 http://www.thinkwiki.org/wiki/ThinkPad_Mini_Dock_Series_3 http://www.thinkwiki.org/wiki/ThinkPad_Mini_Dock_Plus_Series_3 http://www.thinkwiki.org/wiki/ThinkPad_Mini_Dock_Plus_Series_3_for_Mobile_Workstations http://lenovoblogs.com/insidethebox/?p=290 Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Reported-by: Claudius Hubig <claudiushubig@chubig.net> Reported-by: Doctor Bill <docbill@gmail.com> Reported-by: Korte Noack <gbk.noack@gmx.de> Reported-by: Robert de Rooy <robert.de.rooy@gmail.com> Reported-by: Sebastian Will <swill@csail.mit.edu> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-07-07drivers/platform/x86: Fix memory leakAndre Bartke1-1/+3
data is not freed in the error case of compal_probe(). Signed-off-by: Andre Bartke <andre.bartke@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-07-07thinkpad-acpi: handle some new HKEY 0x60xx eventsHenrique de Moraes Holschuh2-5/+26
Handle some user interface events from the newer Lenovo models. We are likely to do something smart with these events in the future, for now, hide the ones we are already certain about from the user and userspace both. * Events 0x6000 and 0x6005 are key-related. 0x6005 is not properly identified yet. Ignore these events, and do not report them. * Event 0x6040 has not been properly identified yet, and we don't know if it is important (looks like it isn't, but still...). Keep reporting it. * Change the message the driver outputs on unknown 0x6xxx events, as all recent events are not related to thermal alarms. Degrade log level from ALERT to WARNING. Thanks to all users who reported these events or asked about them in a number of mailing lists. Your help is highly appreciated, even if I did took a lot of time to act on them. For that I apologise. I will list those that identified the reasons for the events as "reported-by", and I apologise in advance if I leave anyone out: it was not done on purpose, I made the mistake of not properly tagging all event report emails separately, and might have missed some. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Reported-by: Markus Malkusch <markus@malkusch.de> Reported-by: Peter Giles <g1l3sp@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-07-07acer-wmi: fix bitwise bug when set device stateLee, Chun-Yi1-3/+3
Fix a bitwise bug that was found by Joern Heissler, it must be OR but not AND when we query current device state. Acked-by: Joern Heissler <linux-acpi@joern.heissler.de> Cc: Carlos Corbacho <carlos@strangeworlds.co.uk> Cc: Matthew Garrett <mjg@redhat.com> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Corentin Chary <corentincj@iksaif.net> Cc: Thomas Renninger <trenn@suse.de> Signed-off-by: Lee, Chun-Yi <jlee@novell.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-07-07acer-wmi: Only update rfkill status for associated hotkey eventsSeth Forshee1-15/+26
acer-wmi is indiscriminately using the device state from hotkey events to update the various rfkill states. On the Aspire 1830 this can result in a soft block on the wlan when the touchpad hotkey is pressed, as it is reporting a non-zero device state that does not reflect the wireless status. To fix this, only update rfkill states when a wlan or bluetooth hotkey is pressed. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-07-07ARM: 6994/1: smp_twd: Fix typo in 'twd_timer_rate' printingVitaly Kuzmichev1-1/+1
To get hundredths of MHz the rate needs to be divided by 10'000. Here is an example: twd_timer_rate = 123456789 Before the patch: twd_timer_rate / 1000000 = 123 (twd_timer_rate / 1000000) % 100 = 23 Result: 123.23MHz. After being fixed: twd_timer_rate / 1000000 = 123 (twd_timer_rate / 10000) % 100 = 45 Result: 123.45MHz. Signed-off-by: Vitaly Kuzmichev <vkuzmichev@mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-07-07sctp: fix missing send up SCTP_SENDER_DRY_EVENT when subscribe itWei Yongjun1-0/+23
We forgot to send up SCTP_SENDER_DRY_EVENT notification when user app subscribes to this event, and there is no data to be sent or retransmit. This is required by the Socket API and used by the DTLS/SCTP implementation. Reported-by: Michael Tüxen <Michael.Tuexen@lurchi.franken.de> Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Tested-by: Robin Seggelmann <seggelmann@fh-muenster.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-07x86: Don't use the EFI reboot method by defaultMatthew Garrett1-3/+0
Testing suggests that at least some Lenovos and some Intels will fail to reboot via EFI, attempting to jump to an unmapped physical address. In the long run we could handle this by providing a page table with a 1:1 mapping of physical addresses, but for now it's probably just easier to assume that ACPI or legacy methods will be present and reboot via those. Signed-off-by: Matthew Garrett <mjg@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Alan Cox <alan@linux.intel.com> Link: http://lkml.kernel.org/r/1309985557-15350-1-git-send-email-mjg@redhat.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-07drm/kms: allow drm_mode_group with no objectsBen Skeggs1-3/+0
Sometimes we could be controlling a device (such as an NVIDIA Tesla) that has no crtcs/encoders/connectors. One could argue that the driver should unset DRIVER_MODESET in this case, but that changes a whole heap of the DRM's other behaviours, and it's much easier to just be a modesetting driver without any outputs. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-07-07drm/radeon/kms: free ib pool on module unloadingJerome Glisse4-0/+4
ib pool weren't free for various newer asic on module unload. This doesn't cause much arm but still could be candidate for stable. Signed-off-by: Jerome Glisse <jglisse@redhat.com> cc: stable@kernel.org Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-07-07drm/radeon/kms: fix typo in evergreen disp int status registerAlex Deucher1-1/+1
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-07-07drm/radeon/kms: fix typo in IH_CNTL swap bitfieldAlex Deucher2-2/+2
Only affects BE systems. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-07-07net: refine {udp|tcp|sctp}_mem limitsEric Dumazet3-26/+5
Current tcp/udp/sctp global memory limits are not taking into account hugepages allocations, and allow 50% of ram to be used by buffers of a single protocol [ not counting space used by sockets / inodes ...] Lets use nr_free_buffer_pages() and allow a default of 1/8 of kernel ram per protocol, and a minimum of 128 pages. Heavy duty machines sysadmins probably need to tweak limits anyway. References: https://bugzilla.stlinux.com/show_bug.cgi?id=38032 Reported-by: starlight <starlight@binnacle.cx> Suggested-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-07ALSA: hda - Change all ADCs for dual-adc switching mode for RealtekTakashi Iwai1-10/+23
When the dual-adc switching mode is active in Realtek auto-parser, we need to couple all ADCs as a single capture-volume. Currently, the volume control changes only the first ADC, thus others may remain silent. This patch fixes the problem. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07vmxnet3: round down # of queues to power of twoShreyas Bhatewara2-2/+6
vmxnet3 device supports only power-of-two number of queues. The driver therefore needs to check this and rounds down the number of queues to the nearest power of two. Signed-off-by: Yong Wang <yongwang@vmware.com> Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Reviewed-by: Dmitry Torokhov <dtor@vmware.com>
2011-07-07x86, suspend: Restore MISC_ENABLE MSR in realmode wakeupKees Cook3-0/+26
Some BIOSes will reset the Intel MISC_ENABLE MSR (specifically the XD_DISABLE bit) when resuming from S3, which can interact poorly with ebba638ae723d8a8fc2f7abce5ec18b688b791d7. In 32bit PAE mode, this can lead to a fault when EFER is restored by the kernel wakeup routines, due to it setting the NX bit for a CPU that (thanks to the BIOS reset) now incorrectly thinks it lacks the NX feature. (64bit is not affected because it uses a common CPU bring-up that specifically handles the XD_DISABLE bit.) The need for MISC_ENABLE being restored so early is specific to the S3 resume path. Normally, MISC_ENABLE is saved in save_processor_state(), but this happens after the resume header is created, so just reproduce the logic here. (acpi_suspend_lowlevel() creates the header, calls do_suspend_lowlevel, which calls save_processor_state(), so the saved processor context isn't available during resume header creation.) [ hpa: Consider for stable if OK in mainline ] Signed-off-by: Kees Cook <kees.cook@canonical.com> Link: http://lkml.kernel.org/r/20110707011034.GA8523@outflux.net Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: <stable@kernel.org> 2.6.38+
2011-07-07Merge branch 'gpio/merge' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds1-0/+2
* 'gpio/merge' of git://git.secretlab.ca/git/linux-2.6: gpio: tps65910: add missing breaks in tps65910_gpio_init
2011-07-07btrfs: fix oops when doing space balanceMiao Xie1-5/+7
We need to make sure the data relocation inode doesn't go through the delayed metadata updates, otherwise we get an oops during balance: kernel BUG at fs/btrfs/relocation.c:4303! [SNIP] Call Trace: [<ffffffffa03143fd>] ? update_ref_for_cow+0x22d/0x330 [btrfs] [<ffffffffa0314951>] __btrfs_cow_block+0x451/0x5e0 [btrfs] [<ffffffffa031355d>] ? read_block_for_search+0x14d/0x4d0 [btrfs] [<ffffffffa0314beb>] btrfs_cow_block+0x10b/0x240 [btrfs] [<ffffffffa031acae>] btrfs_search_slot+0x49e/0x7a0 [btrfs] [<ffffffffa032d8af>] btrfs_lookup_inode+0x2f/0xa0 [btrfs] [<ffffffff8147bf0e>] ? mutex_lock+0x1e/0x50 [<ffffffffa0380cf1>] btrfs_update_delayed_inode+0x71/0x160 [btrfs] [<ffffffffa037ff27>] ? __btrfs_release_delayed_node+0x67/0x190 [btrfs] [<ffffffffa0381cf8>] btrfs_run_delayed_items+0xe8/0x120 [btrfs] [<ffffffffa03365e0>] btrfs_commit_transaction+0x250/0x850 [btrfs] [<ffffffff810f91d9>] ? find_get_pages+0x39/0x130 [<ffffffffa0336cd5>] ? join_transaction+0x25/0x250 [btrfs] [<ffffffff81081de0>] ? wake_up_bit+0x40/0x40 [<ffffffffa03785fa>] prepare_to_relocate+0xda/0xf0 [btrfs] [<ffffffffa037f2bb>] relocate_block_group+0x4b/0x620 [btrfs] [<ffffffffa0334cf5>] ? btrfs_clean_old_snapshots+0x35/0x150 [btrfs] [<ffffffffa037fa43>] btrfs_relocate_block_group+0x1b3/0x2e0 [btrfs] [<ffffffffa0368ec0>] ? btrfs_tree_unlock+0x50/0x50 [btrfs] [<ffffffffa035e39b>] btrfs_relocate_chunk+0x8b/0x670 [btrfs] [<ffffffffa031303d>] ? btrfs_set_path_blocking+0x3d/0x50 [btrfs] [<ffffffffa03577d8>] ? read_extent_buffer+0xd8/0x1d0 [btrfs] [<ffffffffa031bea1>] ? btrfs_previous_item+0xb1/0x150 [btrfs] [<ffffffffa03577d8>] ? read_extent_buffer+0xd8/0x1d0 [btrfs] [<ffffffffa035f5aa>] btrfs_balance+0x21a/0x2b0 [btrfs] [<ffffffffa0368898>] btrfs_ioctl+0x798/0xd20 [btrfs] [<ffffffff8111e358>] ? handle_mm_fault+0x148/0x270 [<ffffffff814809e8>] ? do_page_fault+0x1d8/0x4b0 [<ffffffff81160d6a>] do_vfs_ioctl+0x9a/0x540 [<ffffffff811612b1>] sys_ioctl+0xa1/0xb0 [<ffffffff81484ec2>] system_call_fastpath+0x16/0x1b [SNIP] RIP [<ffffffffa037c1cc>] btrfs_reloc_cow_block+0x22c/0x270 [btrfs] Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-07-07Btrfs: don't panic if we get an error while balancing V2Josef Bacik1-1/+2
A user reported an error where if we try to balance an fs after a device has been removed it will blow up. This is because we get an EIO back and this is where BUG_ON(ret) bites us in the ass. To fix we just exit. Thanks, Reported-by: Anand Jain <Anand.Jain@oracle.com> Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-27 06:17:45 +0300