summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-10-12Merge branch 'gve-improvements'David S. Miller7-103/+201
Jeroen de Borst says: ==================== gve: minor code and performance improvements This patchset contains a number of independent minor code and performance improvements. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-12gve: Track RX buffer allocation failuresCatherine Sullivan1-1/+6
The rx_buf_alloc_fail counter wasn't getting updated. Fixes: 433e274b8f7b0 ("gve: Add stats for gve.") Signed-off-by: Catherine Sullivan <csully@google.com> Signed-off-by: Jeroen de Borst <jeroendb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-12gve: Allow pageflips on larger pagesJordan Kim1-1/+1
Half pages are just used for small enough packets. This change allows this to also apply for systems with pages larger than 4 KB. Fixes: 02b0e0c18ba75 ("gve: Rx Buffer Recycling") Signed-off-by: Jordan Kim <jrkim@google.com> Signed-off-by: Jeroen de Borst <jeroendb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-12gve: Add netif_set_xps_queue callCatherine Sullivan1-0/+4
Configure XPS when adding tx queues to the notification blocks. Fixes: dbdaa67540512 ("gve: Move some static functions to a common file") Signed-off-by: Catherine Sullivan <csully@google.com> Signed-off-by: David Awogbemila <awogbemila@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-12gve: Recover from queue stall due to missed IRQJohn Fraker3-2/+51
Don't always reset the driver on a TX timeout. Attempt to recover by kicking the queue in case an IRQ was missed. Fixes: 9e5f7d26a4c08 ("gve: Add workqueue and reset support") Signed-off-by: John Fraker <jfraker@google.com> Signed-off-by: David Awogbemila <awogbemila@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-12gve: Do lazy cleanup in TX pathTao Liu4-50/+62
When TX queue is full, attemt to process enough TX completions to avoid stalling the queue. Fixes: f5cedc84a30d2 ("gve: Add transmit and receive support") Signed-off-by: Tao Liu <xliutaox@google.com> Signed-off-by: Catherine Sullivan <csully@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-12gve: Add rx buffer pagecnt biasCatherine Sullivan1-15/+37
Add a pagecnt bias field to rx buffer info struct to eliminate needing to increment the atomic page ref count on every pass in the rx hotpath. Also prefetch two packet pages ahead. Fixes: ede3fcf5ec67f ("gve: Add support for raw addressing to the rx path") Signed-off-by: Yanchun Fu <yangchun@google.com> Signed-off-by: Nathan Lewis <npl@google.com> Signed-off-by: Catherine Sullivan <csully@google.com> Signed-off-by: David Awogbemila <awogbemila@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-12gve: Switch to use napi_complete_doneYangchun Fu3-37/+43
Use napi_complete_done to allow for the use of gro_flush_timeout. Fixes: f5cedc84a30d2 ("gve: Add transmit and receive support") Signed-off-by: Yangchun Fu <yangchun@google.com> Signed-off-by: Catherine Sullivan <csully@google.com> Signed-off-by: David Awogbemila <awogbemila@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-11arm64/hugetlb: fix CMA gigantic page order for non-4K PAGE_SIZEMike Kravetz1-1/+1
For non-4K PAGE_SIZE configs, the largest gigantic huge page size is CONT_PMD_SHIFT order. On arm64 with 64K PAGE_SIZE, the gigantic page is 16G. Therefore, one should be able to specify 'hugetlb_cma=16G' on the kernel command line so that one gigantic page can be allocated from CMA. However, when adding such an option the following message is produced: hugetlb_cma: cma area should be at least 8796093022208 MiB This is because the calculation for non-4K gigantic page order is incorrect in the arm64 specific routine arm64_hugetlb_cma_reserve(). Fixes: abb7962adc80 ("arm64/hugetlb: Reserve CMA areas for gigantic pages on 16K and 64K configs") Cc: <stable@vger.kernel.org> # 5.9.x Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Link: https://lore.kernel.org/r/20211005202529.213812-1-mike.kravetz@oracle.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-10-11workqueue: fix state-dump console deadlockJohan Hovold1-2/+16
Console drivers often queue work while holding locks also taken in their console write paths, something which can lead to deadlocks on SMP when dumping workqueue state (e.g. sysrq-t or on suspend failures). For serial console drivers this could look like: CPU0 CPU1 ---- ---- show_workqueue_state(); lock(&pool->lock); <IRQ> lock(&port->lock); schedule_work(); lock(&pool->lock); printk(); lock(console_owner); lock(&port->lock); where workqueues are, for example, used to push data to the line discipline, process break signals and handle modem-status changes. Line disciplines and serdev drivers can also queue work on write-wakeup notifications, etc. Reworking every console driver to avoid queuing work while holding locks also taken in their write paths would complicate drivers and is neither desirable or feasible. Instead use the deferred-printk mechanism to avoid printing while holding pool locks when dumping workqueue state. Note that there are a few WARN_ON() assertions in the workqueue code which could potentially also trigger a deadlock. Hopefully the ongoing printk rework will provide a general solution for this eventually. This was originally reported after a lockdep splat when executing sysrq-t with the imx serial driver. Fixes: 3494fc30846d ("workqueue: dump workqueues on sysrq-t") Cc: stable@vger.kernel.org # 4.0 Reported-by: Fabio Estevam <festevam@denx.de> Tested-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: John Ogness <john.ogness@linutronix.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2021-10-11ALSA: pcm: Workaround for a wrong offset in SYNC_PTR compat ioctlTakashi Iwai1-1/+71
Michael Forney reported an incorrect padding type that was defined in the commit 80fe7430c708 ("ALSA: add new 32-bit layout for snd_pcm_mmap_status/control") for PCM control mmap data. His analysis is correct, and this caused the misplacements of PCM control data on 32bit arch and 32bit compat mode. The bug is that the __pad2 definition in __snd_pcm_mmap_control64 struct was wrongly with __pad_before_uframe, which should have been __pad_after_uframe instead. This struct is used in SYNC_PTR ioctl and control mmap. Basically this bug leads to two problems: - The offset of avail_min field becomes wrong, it's placed right after appl_ptr without padding on little-endian - When appl_ptr and avail_min are read as 64bit values in kernel side, the values become either zero or corrupted (mixed up) One good news is that, because both user-space and kernel misunderstand the wrong offset, at least, 32bit application running on 32bit kernel works as is. Also, 64bit applications are unaffected because the padding size is zero. The remaining problem is the 32bit compat mode; as mentioned in the above, avail_min is placed right after appl_ptr on little-endian archs, 64bit kernel reads bogus values for appl_ptr updates, which may lead to streaming bugs like jumping, XRUN or whatever unexpected. (However, we haven't heard any serious bug reports due to this over years, so practically seen, it's fairly safe to assume that the impact by this bug is limited.) Ideally speaking, we should correct the wrong mmap status control definition. But this would cause again incompatibility with the existing binaries, and fixing it (e.g. by renumbering ioctls) would be really messy. So, as of this patch, we only correct the behavior of 32bit compat mode and keep the rest as is. Namely, the SYNC_PTR ioctl is now handled differently in compat mode to read/write the 32bit values at the right offsets. The control mmap of 32bit apps on 64bit kernels has been already disabled (which is likely rather an overlook, but this worked fine at this time :), so covering SYNC_PTR ioctl should suffice as a fallback. Fixes: 80fe7430c708 ("ALSA: add new 32-bit layout for snd_pcm_mmap_status/control") Reported-by: Michael Forney <mforney@mforney.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Cc: <stable@vger.kernel.org> Cc: Rich Felker <dalias@libc.org> Link: https://lore.kernel.org/r/29QBMJU8DE71E.2YZSH8IHT5HMH@mforney.org Link: https://lore.kernel.org/r/20211010075546.23220-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-10-11ice: ndo_setup_tc implementation for PRMichal Swiatkowski4-0/+74
Add tc-flower support for VF port representor devices. Implement ndo_setup_tc callback for TC HW offload on VF port representors devices. Implemented both methods: add and delete tc-flower flows. Mark NETIF_F_HW_TC bit in net device's feature set to enable offload TC infrastructure for port representor. Implement TC filters replay function required to restore filters settings while switchdev configuration is rebuilt. Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com> Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-11ice: ndo_setup_tc implementation for PFKiran Patil5-1/+1044
Implement ndo_setup_tc net device callback for TC HW offload on PF device. ndo_setup_tc provides support for HW offloading various TC filters. Add support for configuring the following filter with tc-flower: - default L2 filters (src/dst mac addresses, ethertype, VLAN) - variations of L3, L3+L4, L2+L3+L4 filters using advanced filters (including ipv4 and ipv6 addresses). Allow for adding/removing TC flows when PF device is configured in eswitch switchdev mode. Two types of actions are supported at the moment: FLOW_ACTION_DROP and FLOW_ACTION_REDIRECT. Co-developed-by: Priyalee Kushwaha <priyalee.kushwaha@intel.com> Signed-off-by: Priyalee Kushwaha <priyalee.kushwaha@intel.com> Signed-off-by: Kiran Patil <kiran.patil@intel.com> Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-11ice: Allow changing lan_en and lb_en on all kinds of filtersMichal Swiatkowski1-0/+127
There is no way to change default lan_en and lb_en flags while adding new rule. Add function that allows changing these flags on rule determined by rule id and recipe id. Function checks if the rule is presented on regular rules list or advance rules list and call the appropriate function to update rule entry. As rules with ICE_SW_LKUP_DFLT recipe aren't tracked in a list, implement function which updates flags without searching for rules based only on rule id. Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com> Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-11ice: cleanup rules infoVictor Raj2-10/+59
Change ICE_SW_LKUP_LAST to ICE_MAX_NUM_RECIPES as for now there also can be recipes other than the default. Free all structures created for advanced recipes in cleanup function. Write a function to clean allocated structures on advanced rule info. Signed-off-by: Victor Raj <victor.raj@intel.com> Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-11ice: allow deleting advanced rulesShivanshu Shukla2-0/+229
To remove advanced rule the same protocols list like in adding should be send to function. Based on this information list of advanced rules is searched to find the correct rule id. Remove advanced rule if it forwards to only one VSI. If it forwards to list of VSI remove only input VSI from this list. Introduce function to remove rule by id. It is used in case rule needs to be removed even if it forwards to the list of VSI. Allow removing all advanced rules from a particular VSI. It is useful in rebuilding VSI path. Co-developed-by: Dan Nowlin <dan.nowlin@intel.com> Signed-off-by: Dan Nowlin <dan.nowlin@intel.com> Signed-off-by: Shivanshu Shukla <shivanshu.shukla@intel.com> Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-11ice: allow adding advanced rulesGrishma Kotecha4-1/+847
Define dummy packet headers to allow adding advanced rules in HW. This header is used as admin queue command parameter for adding a rule. The firmware will extract correct fields and will use them in look ups. Define each supported packets header and offsets to words used in recipe. Supported headers: - MAC + IPv4 + UDP - MAC + VLAN + IPv4 + UDP - MAC + IPv4 + TCP - MAC + VLAN + IPv4 + TCP - MAC + IPv6 + UDP - MAC + VLAN + IPv6 + UDP - MAC + IPv6 + TCP - MAC + VLAN + IPv6 + TCP Add code for creating an advanced rule. Rule needs to match defined dummy packet, if not return error, which means that this type of rule isn't currently supported. The first step in adding advanced rule is searching for an advanced recipe matching this kind of rule. If it doesn't exist new recipe is created. Dummy packet has to be filled with the correct header field value from the rule definition. It will be used to do look up in HW. Support searching for existing advance rule entry. It is used in case of adding the same rule on different VSI. In this case, instead of creating new rule, the existing one should be updated with refreshed VSI list. Add initialization for prof_res_bm_init flag to zero so that the possible resource for fv in the files can be initialized. Co-developed-by: Dan Nowlin <dan.nowlin@intel.com> Signed-off-by: Dan Nowlin <dan.nowlin@intel.com> Signed-off-by: Grishma Kotecha <grishma.kotecha@intel.com> Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-11ice: create advanced switch recipeDan Nowlin5-22/+1412
These changes introduce code for creating advanced recipes for the switch in hardware. There are a couple of recipes already defined in the HW. They apply to matching on basic protocol headers, like MAC, VLAN, MACVLAN, ethertype or direction (promiscuous), etc.. If the user wants to match on other protocol headers (eg. ip address, src/dst port etc.) or different variation of already supported protocols, there is a need to create new, more complex recipe. That new recipe is referred as 'advanced recipe', and the filtering rule created on top of that recipe is called 'advanced rule'. One recipe can have up to 5 words, but the first word is always reserved for match on switch id, so the driver can define up to 4 words for one recipe. To support recipes with more words up to 5 recipes can be chained, so 20 words can be programmed for look up. Input for adding recipe function is a list of protocols to support. Based on this list correct profile is being chosen. Correct profile means that it contains all protocol types from a list. Each profile have up to 48 field vector words and each of this word have protocol id and offset. These two fields need to match with input data for adding recipe function. If the correct profile can't be found the function returns an error. The next step after finding the correct profile is grouping words into groups. One group can have up to 4 words. This is done to simplify sending recipes to HW (because recipe also can have up to 4 words). In case of chaining (so when look up consists of more than 4 words) last recipe will always have results from the previous recipes used as words. A recipe to profile map is used to store information about which profile is associate with this recipe. This map is an array of 64 elements (max number of recipes) and each element is a 256 bits bitmap (max number of profiles) Profile to recipe map is used to store information about which recipe is associate with this profile. This map is an array of 256 elements (max number of profiles) and each element is a 64 bits bitmap (max number of recipes) Signed-off-by: Dan Nowlin <dan.nowlin@intel.com> Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-11ice: manage profiles and field vectorsDan Nowlin5-1/+268
Implement functions to manage profiles and field vectors in hardware. In hardware, there are up to 256 profiles and each of these profiles can have 48 field vector words. Each field vector word is described by protocol id and offset in the packet. To add a new recipe all used profiles need to be searched. If the profile contains all required protocol ids and offsets from the recipe it can be used. The driver has to add this profile to recipe association to tell hardware that newly added recipe is going to be associated with this profile. The amount of used profiles depend on the package. To avoid searching across not used profile, max profile id value is calculated at init flow. The profile is considered as unused when all field vector words in the profile are invalid (protocol id 0xff and offset 0x1ff). Profiles are read from the package section ICE_SID_FLD_VEC_SW. Empty field vector words can be used for recipe results. Store all unused field vector words in prof_res_bm. It is a 256 elements array (max number of profiles) each element is a 48 bit bitmap (max number of field vector words). For now, support only non-tunnel profiles type. Co-developed-by: Grishma Kotecha <grishma.kotecha@intel.com> Signed-off-by: Grishma Kotecha <grishma.kotecha@intel.com> Signed-off-by: Dan Nowlin <dan.nowlin@intel.com> Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-11ice: implement low level recipes functionsGrishma Kotecha2-0/+212
Add code to manage recipes and profiles on admin queue layer. Allow the driver to add a new recipe and update an existing one. Get a recipe and get a recipe to profile association is mostly used in update existing recipes code. Only default recipes can be updated. An update is done by reading recipes from HW, changing their params and calling add recipe command. Support following admin queue commands: - ice_aqc_opc_add_recipe (0x0290) - create a recipe with protocol header information and other details that determine how this recipe filter works - ice_aqc_opc_recipe_to_profile (0x0291) - associate a switch recipe to a profile - ice_aqc_opc_get_recipe (0x0292) - get details of an existing recipe - ice_aqc_opc_get_recipe_to_profile (0x0293) - get a recipe associated with profile ID Define ICE_AQC_RES_TYPE_RECIPE resource type to hold a switch recipe. It is needed when a new switch recipe needs to be created. Co-developed-by: Dan Nowlin <dan.nowlin@intel.com> Signed-off-by: Dan Nowlin <dan.nowlin@intel.com> Signed-off-by: Grishma Kotecha <grishma.kotecha@intel.com> Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-11platform/x86: int1092: Fix non sequential device mode handlingShravan S2-9/+16
SAR information from BIOS may come in non sequential pattern. To overcome the issue, a check is made to extract the right SAR information using the device mode which is currently being used. Remove .owner field if calls are used which set it automatically. Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Signed-off-by: Shravan S <s.shravan@intel.com> Link: https://lore.kernel.org/r/20211006073525.1332925-1-s.shravan@intel.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2021-10-11ethernet: sun: add missing semicolon, fix buildStephen Rothwell1-1/+1
Fix for this build problem: drivers/net/ethernet/sun/ldmvsw.c: In function 'vsw_alloc_netdev': drivers/net/ethernet/sun/ldmvsw.c:243:2: error: expected ';' before 'sprintf' sprintf(dev->name, "vif%d.%d", (int)handle, (int)port_id); ^~~~~~~ Fixes: a7639279c93c ("ethernet: sun: remove direct netdev->dev_addr writes") Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Link: https://lore.kernel.org/r/20211011173424.7743035d@canb.auug.org.au Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-11platform/x86: intel_skl_int3472: Correct null checkDaniel Scally1-1/+1
The int3472-discrete driver can enter an error path after initialising int3472->clock.ena_gpio, but before it has registered the clock. This will cause a NULL pointer dereference, because clkdev_drop() is not null aware. Instead of guarding the call to skl_int3472_unregister_clock() by checking for .ena_gpio, check specifically for the presence of the clk_lookup, which will guarantee clkdev_create() has already been called. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=214453 Fixes: 7540599a5ef1 ("platform/x86: intel_skl_int3472: Provide skl_int3472_unregister_clock()") Signed-off-by: Daniel Scally <djrscally@gmail.com> Link: https://lore.kernel.org/r/20211008224608.415949-1-djrscally@gmail.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-10-11platform/x86: gigabyte-wmi: add support for B550 AORUS ELITE AX V2Zephaniah E. Loss-Cutler-Hull1-0/+1
This works just fine on my system. Signed-off-by: Zephaniah E. Loss-Cutler-Hull <zephaniah@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211005044855.1429724-1-zephaniah@gmail.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-10-11platform/x86: amd-pmc: Add alternative acpi id for PMC controllerSachi King1-0/+1
The Surface Laptop 4 AMD has used the AMD0005 to identify this controller instead of using the appropriate ACPI ID AMDI0005. Include AMD0005 in the acpi id list. Link: https://github.com/linux-surface/acpidumps/tree/master/surface_laptop_4_amd Link: https://gist.github.com/nakato/2a1a7df1a45fe680d7a08c583e1bf863 Cc: <stable@vger.kernel.org> # 5.14+ Signed-off-by: Sachi King <nakato@nakato.io> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20211002041840.2058647-1-nakato@nakato.io Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-10-11platform/x86: intel_scu_ipc: Update timeout value in commentPrashant Malani1-1/+1
The comment decribing the IPC timeout hadn't been updated when the actual timeout was changed from 3 to 5 seconds in commit a7d53dbbc70a ("platform/x86: intel_scu_ipc: Increase virtual timeout from 3 to 5 seconds") . Since the value is anyway updated to 10s now, take this opportunity to update the value in the comment too. Signed-off-by: Prashant Malani <pmalani@chromium.org> Cc: Benson Leung <bleung@chromium.org> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Link: https://lore.kernel.org/r/20210928101932.2543937-4-pmalani@chromium.org Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-10-11platform/x86: intel_scu_ipc: Increase virtual timeout to 10sPrashant Malani1-1/+1
Commit a7d53dbbc70a ("platform/x86: intel_scu_ipc: Increase virtual timeout from 3 to 5 seconds") states that the recommended timeout range is 5-10 seconds. Adjust the timeout value to the higher of those i.e 10 seconds, to account for situations where the 5 seconds is insufficient for disconnect command success. Signed-off-by: Prashant Malani <pmalani@chromium.org> Cc: Benson Leung <bleung@chromium.org> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Link: https://lore.kernel.org/r/20210928101932.2543937-3-pmalani@chromium.org Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-10-11platform/x86: intel_scu_ipc: Fix busy loop expiry timePrashant Malani1-1/+1
The macro IPC_TIMEOUT is already in jiffies (it is also used like that elsewhere in the file when calling wait_for_completion_timeout()). Don’t convert it using helper functions for the purposes of calculating the busy loop expiry time. Fixes: e7b7ab3847c9 (“platform/x86: intel_scu_ipc: Sleeping is fine when polling”) Signed-off-by: Prashant Malani <pmalani@chromium.org> Cc: Benson Leung <bleung@chromium.org> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Link: https://lore.kernel.org/r/20210928101932.2543937-2-pmalani@chromium.org Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-10-11platform/x86: dell: Make DELL_WMI_PRIVACY depend on DELL_WMIHans de Goede1-0/+1
DELL_WMI_PRIVACY is a feature toggle for the main dell-wmi driver, so it must depend on the Kconfig option which enables the main dell-wmi driver. Fixes: 8af9fa37b8a3 ("platform/x86: dell-privacy: Add support for Dell hardware privacy") Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20211011132338.407571-1-hdegoede@redhat.com
2021-10-11platform/mellanox: mlxreg-io: Fix read access of n-bytes size attributesVadim Pasternak1-1/+1
Fix shift argument for function rol32(). It should be provided in bits, while was provided in bytes. Fixes: 86148190a7db ("platform/mellanox: mlxreg-io: Add support for complex attributes") Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Link: https://lore.kernel.org/r/20210927142214.2613929-3-vadimp@nvidia.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-10-11platform/mellanox: mlxreg-io: Fix argument base in kstrtou32() callVadim Pasternak1-1/+1
Change kstrtou32() argument 'base' to be zero instead of 'len'. It works by chance for setting one bit value, but it is not supposed to work in case value passed to mlxreg_io_attr_store() is greater than 1. It works for example, for: echo 1 > /sys/devices/platform/mlxplat/mlxreg-io/hwmon/.../jtag_enable But it will fail for: echo n > /sys/devices/platform/mlxplat/mlxreg-io/hwmon/.../jtag_enable, where n > 1. The flow for input buffer conversion is as below: _kstrtoull(const char *s, unsigned int base, unsigned long long *res) calls: rv = _parse_integer(s, base, &_res); For the second case, where n > 1: - _parse_integer() converts 's' to 'val'. For n=2, 'len' is set to 2 (string buffer is 0x32 0x0a), for n=3 'len' is set to 3 (string buffer 0x33 0x0a), etcetera. - 'base' is equal or greater then '2' (length of input buffer). As a result, _parse_integer() exits with result zero (rv): rv = 0; while (1) { ... if (val >= base)-> (2 >= 2) break; ... rv++; ... } And _kstrtoull() in their turn will fail: if (rv == 0) return -EINVAL; Fixes: 5ec4a8ace06c ("platform/mellanox: Introduce support for Mellanox register access driver") Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Link: https://lore.kernel.org/r/20210927142214.2613929-2-vadimp@nvidia.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-10-11ALSA: hda/realtek: Fix for quirk to enable speaker output on the Lenovo 13s Gen2Cameron Berkenpas1-1/+1
The previous patch's HDA verb initialization for the Lenovo 13s sequence was slightly off. This updated verb sequence has been tested and confirmed working. Fixes: ad7cc2d41b7a ("ALSA: hda/realtek: Quirks to enable speaker output for Lenovo Legion 7i 15IMHG05, Yoga 7i 14ITL5/15ITL5, and 13s Gen2 laptops.") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208555 Cc: <stable@vger.kernel.org> Signed-off-by: Cameron Berkenpas <cam@neo-zeon.de> Link: https://lore.kernel.org/r/20211010225410.23423-1-cam@neo-zeon.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-10-11Linux 5.15-rc5Linus Torvalds1-1/+1
2021-10-10Merge tag 'powerpc-5.15-3' of ↵Linus Torvalds17-75/+234
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "A bit of a big batch, partly because I didn't send any last week, and also just because the BPF fixes happened to land this week. Summary: - Fix a regression hit by the IPR SCSI driver, introduced by the recent addition of MSI domains on pseries. - A big series including 8 BPF fixes, some with potential security impact and the rest various code generation issues. - Fix our program check assembler entry path, which was accidentally jumping into a gas macro and generating strange stack frames, which could confuse find_bug(). - A couple of fixes, and related changes, to fix corner cases in our machine check handling. - Fix our DMA IOMMU ops, which were not always returning the optimal DMA mask, leading to at least one device falling back to 32-bit DMA when it shouldn't. - A fix for KUAP handling on 32-bit Book3S. - Fix crashes seen when kdumping on some pseries systems. Thanks to Naveen N. Rao, Nicholas Piggin, Alexey Kardashevskiy, Cédric Le Goater, Christophe Leroy, Mahesh Salgaonkar, Abdul Haleem, Christoph Hellwig, Johan Almbladh, Stan Johnson" * tag 'powerpc-5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: pseries/eeh: Fix the kdump kernel crash during eeh_pseries_init powerpc/32s: Fix kuap_kernel_restore() powerpc/pseries/msi: Add an empty irq_write_msi_msg() handler powerpc/64s: Fix unrecoverable MCE calling async handler from NMI powerpc/64/interrupt: Reconcile soft-mask state in NMI and fix false BUG powerpc/64: warn if local irqs are enabled in NMI or hardirq context powerpc/traps: do not enable irqs in _exception powerpc/64s: fix program check interrupt emergency stack path powerpc/bpf ppc32: Fix BPF_SUB when imm == 0x80000000 powerpc/bpf ppc32: Do not emit zero extend instruction for 64-bit BPF_END powerpc/bpf ppc32: Fix JMP32_JSET_K powerpc/bpf ppc32: Fix ALU32 BPF_ARSH operation powerpc/bpf: Emit stf barrier instruction sequences for BPF_NOSPEC powerpc/security: Add a helper to query stf_barrier type powerpc/bpf: Fix BPF_SUB when imm == 0x80000000 powerpc/bpf: Fix BPF_MOD when imm == 1 powerpc/bpf: Validate branch ranges powerpc/lib: Add helper to check if offset is within conditional branch range powerpc/iommu: Report the correct most efficient DMA mask for PCI devices
2021-10-10Merge tag 'objtool_urgent_for_v5.15_rc5' of ↵Linus Torvalds6-50/+25
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool fixes from Borislav Petkov: - Remove an extra section.len member in favour of section.sh_size - Align .altinstructions section creation with the kernel's by creating them with entry size of 0 - Fix objtool to convert a reloc symbol to a section offset and not to not warn about not knowing how * tag 'objtool_urgent_for_v5.15_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Remove redundant 'len' field from struct section objtool: Make .altinstructions section entry size consistent objtool: Remove reloc symbol type checks in get_alt_entry()
2021-10-10Merge tag 'x86_urgent_for_v5.15_rc5' of ↵Linus Torvalds9-14/+99
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - A FPU fix to properly handle invalid MXCSR values: 32-bit masks them out due to historical reasons and 64-bit kernels reject them - A fix to clear X86_FEATURE_SMAP when support for is not config-enabled - Three fixes correcting misspelled Kconfig symbols used in code - Two resctrl object cleanup fixes - Yet another attempt at fixing the neverending saga of botched x86 timers, this time because some incredibly smart hardware decides to turn off the HPET timer in a low power state - who cares if the OS is relying on it... - Check the full return value range of an SEV VMGEXIT call to determine whether it returned an error * tag 'x86_urgent_for_v5.15_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/fpu: Restore the masking out of reserved MXCSR bits x86/Kconfig: Correct reference to MWINCHIP3D x86/platform/olpc: Correct ifdef symbol to intended CONFIG_OLPC_XO15_SCI x86/entry: Clear X86_FEATURE_SMAP when CONFIG_X86_SMAP=n x86/entry: Correct reference to intended CONFIG_64_BIT x86/resctrl: Fix kfree() of the wrong type in domain_add_cpu() x86/resctrl: Free the ctrlval arrays when domain_setup_mon_state() fails x86/hpet: Use another crystalball to evaluate HPET usability x86/sev: Return an error on a returned non-zero SW_EXITINFO1[31:0]
2021-10-10octeontx2-pf: Simplify the receive buffer size calculationSubbaraya Sundeep6-28/+35
This patch separates the logic of configuring hardware maximum transmit frame size and receive frame size. This simplifies the logic to calculate receive buffer size and using cqe descriptor of different size. Also additional size of skb_shared_info structure is allocated for each receive buffer pointer given to hardware which is not necessary. Hence change the size calculation to remove the size of skb_shared_info. Add a check for array out of bounds while adding fragments to the network stack. Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-10ethernet: Remove redundant 'flush_workqueue()' callsChristophe JAILLET12-15/+0
'destroy_workqueue()' already drains the queue before destroying it, so there is no need to flush it explicitly. Remove the redundant 'flush_workqueue()' calls. This was generated with coccinelle: @@ expression E; @@ - flush_workqueue(E); destroy_workqueue(E); Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> #mlx* Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-10virtio_net: skip RCU read lock by checking xdp_enabled of viLi RongQing1-0/+14
networking benchmark shows that __rcu_read_lock and __rcu_read_unlock takes some cpu cycles, and we can avoid calling them partially in virtio rx path by check xdp_enabled of vi, and xdp is disabled most of time Signed-off-by: Li RongQing <lirongqing@baidu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-10net: make dev_get_port_parent_id slightly more readableAntoine Tenart1-5/+2
Cosmetic commit making dev_get_port_parent_id slightly more readable. There is no need to split the condition to return after calling devlink_compat_switch_id_get and after that 'recurse' is always true. Signed-off-by: Antoine Tenart <atenart@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-10net: phy: at803x: better describe debug regsAnsuel Smith1-15/+15
Give a name to known debug regs from Documentation instead of using unknown hex values. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-10net: phy: at803x: enable prefer master for 83xx internal phyAnsuel Smith1-0/+3
From original QCA source code the port was set to prefer master as port type in 1000BASE-T mode. Apply the same settings also here. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-10net: phy: at803x: add DAC amplitude fix for 8327 phyAnsuel Smith1-0/+33
QCA8327 internal phy require DAC amplitude adjustement set to +6% with 100m speed. Also add additional define to report a change of the same reg in QCA8337. (different scope it does set 1000m voltage) Add link_change_notify function to set the proper amplitude adjustement on PHY_RUNNING state and disable on any other state. Fixes: b4df02b562f4 ("net: phy: at803x: add support for qca 8327 A variant internal phy") Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-10net: phy: at803x: fix resume for QCA8327 phyAnsuel Smith1-6/+63
From Documentation phy resume triggers phy reset and restart auto-negotiation. Add a dedicated function to wait reset to finish as it was notice a regression where port sometime are not reliable after a suspend/resume session. The reset wait logic is copied from phy_poll_reset. Add dedicated suspend function to use genphy_suspend only with QCA8337 phy and set only additional debug settings for QCA8327. With more test it was reported that QCA8327 doesn't proprely support this mode and using this cause the unreliability of the switch ports, especially the malfunction of the port0. Fixes: 15b9df4ece17 ("net: phy: at803x: add resume/suspend function to qca83xx phy") Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-10Merge branch 'net-use-helpers'David S. Miller4-5/+4
Juhee Kang says: ==================== net-next: replace open code with helper functions Currently, there are many helper functions on netdevice.h. However, some code doesn't use the helper functions and remains open code. So this patchset replaces open code with an appropriate helper function. First patch modifies to use netif_is_rxfh_configured instead of dev->priv_flags & IFF_RXFH_CONFIGURED. Second patch replaces open code with netif_is_bond_master. Last patch substitutes netif_is_macsec() for dev->priv_flags & IFF_MACSEC. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-10mlxsw: spectrum: use netif_is_macsec() instead of open codeJuhee Kang1-1/+1
Open code which is dev->priv_flags & IFF_MACSEC has already defined as netif_is_macsec(). So use netif_is_macsec() instead of open code. This patch doesn't change logic. Signed-off-by: Juhee Kang <claudiajkang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-10hv_netvsc: use netif_is_bond_master() instead of open codeJuhee Kang1-2/+1
Use netif_is_bond_master() function instead of open code, which is ((event_dev->priv_flags & IFF_BONDING) && (event_dev->flags & IFF_MASTER)). This patch doesn't change logic. Signed-off-by: Juhee Kang <claudiajkang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-10bnxt: use netif_is_rxfh_configured instead of open codeJuhee Kang2-2/+2
The open code which is dev->priv_flags & IFF_RXFH_CONFIGURED is defined as a helper function on netdevice.h. So use netif_is_rxfh_configured() function instead of open code. This patch doesn't change logic. Signed-off-by: Juhee Kang <claudiajkang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-10Merge branch 'ionic-vlanid-mgmt'David S. Miller8-200/+345
Shannon Nelson says: ==================== ionic: add vlanid overflow management Add vlans to the existing rx_filter_sync mechanics currently used for managing mac filters. Older versions of our firmware had no enforced limits on the number of vlans that the driver could request, but requesting large numbers of vlans caused issues in FW memory management, so an arbitrary limit was added in the FW. The FW now returns -ENOSPC when it hits that limit, which the driver needs to handle. Unfortunately, the FW doesn't advertise the vlan id limit, as it does with mac filters, so the driver won't know the limit until it bumps into it. We'll grab the current vlan id count and use that as the limit from there on and thus prevent getting any more -ENOSPC errors. Just as is done for the mac filters, the device puts the device into promiscuous mode when -ENOSPC is seen for vlan ids, and the driver will track the vlans that aren't synced to the FW. When vlans are removed, the driver will retry the un-synced vlans. If all outstanding vlans are synced, the promiscuous mode will be disabled. The first 6 patches rework the existing filter management to make it flexible enough for additional filter types. Next we add the vlan ids into the management. The last 2 patches allow us to catch the max vlan -ENOSPC error without adding an unnecessary error message to the kernel log. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-10ionic: tame the filter no space messageShannon Nelson1-1/+14
Override the automatic AdminQ error message in order to capture the potential No Space message when we hit the max vlan limit, and add additional messaging to detail what filter failed. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-01 06:30:30 +0300