summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2019-06-27mt76: mt7615: add support for mtd eeprom parsingLorenzo Bianconi1-6/+23
Calibration data are often available on a specific mtd partition on embedded devices. Take into account eeprom calibration data if available. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-27mt76: move mt76_insert_ccmp_hdr in mt76-moduleLorenzo Bianconi4-49/+26
Move mt7615_insert_ccmp_hdr in mac80211.c and rename it in mt76_insert_ccmp_hdr since it is shared between mt7603 and mt7615 drivers Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-27mt76: mt76x02: fix tx reordering on rate control probing without a-mpduFelix Fietkau2-2/+4
To avoid aggregating rate control probing packets with other traffic, and to ensure that the probing rate gets used, probing packets get assigned a different internal queueing priority. This causes packets to be transmitted in a different order, which is compensated by the receiver side reordering. However, if A-MPDU is disabled, this reordering can become visible to upper layers on the receiver side. Disable the priority change if A-MPDU is disabled. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-27mt76: mt76x02: fix tx status reporting issuesFelix Fietkau4-20/+109
When the hardware falls back to lower rates for a transmit attempt, only the first status report will show the number of retries correctly. The frames that follow will report the correct final rate, but number of retries set to 0. This can cause the rate control module to vastly underestimate the number of retransmissions per rate. To fix this, we need to keep track of the initial requested tx rate per packet and pass it to the status information. For frames with tx status requested, this is simple: use the rate configured in info->control.rates[0] as reference. For no-skb tx status information, we have to encode the requested tx rate in the packet id (and make it possible to distinguish it from real packet ids). To do that, reduce the packet id field size by one bit, and use that bit to indicate packet id vs rate. This change also improves reporting by filling the status rate array with rates from first rate to final rate, taking the same steps as the hardware fallback table. This matters in corner cases like MCS8 on HT, where the fallback target is MCS0, not MCS7. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-27mt76: fix setting chan->max_powerFelix Fietkau3-7/+9
When setting chan->max_power after registering the wiphy, chan->max_reg_power needs to be used as a limit Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-27mt76: mt7603: fix reading target tx power from eepromFelix Fietkau2-0/+6
For the external PA (TSSI OFF) case, the target power needs to be read from a different location in EEPROM Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25mt76: mt7615: do not process rx packets if the device is not initializedLorenzo Bianconi1-0/+3
Fix following crash that occurs when the driver is processing rx packets while the device is not initialized yet $ rmmod mt7615e [ 67.210261] mt7615e 0000:01:00.0: Message -239 (seq 2) timeout $ modprobe mt7615e [ 72.406937] bus=0x1, slot = 0x0, irq=0x16 [ 72.436590] CPU 0 Unable to handle kernel paging request at virtual address 00000004, epc == 8eec4240, ra == 8eec41e0 [ 72.450291] mt7615e 0000:01:00.0: Firmware is not ready for download [ 72.457724] Oops[#1]: [ 72.470494] mt7615e: probe of 0000:01:00.0 failed with error -5 [ 72.474829] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.14.114 #0 [ 72.498702] task: 805769e0 task.stack: 80564000 [ 72.507709] $ 0 : 00000000 00000001 00000000 00000001 [ 72.518106] $ 4 : 8f704dbc 00000000 00000000 8f7046c0 [ 72.528500] $ 8 : 00000024 8045e98c 81210008 11000000 [ 72.538895] $12 : 8fc09f60 00000008 00000019 00000033 [ 72.549289] $16 : 8f704d80 e00000ff 8f0c7800 3c182406 [ 72.559684] $20 : 00000006 8ee615a0 4e000108 00000000 [ 72.570078] $24 : 0000004c 8000cf94 [ 72.580474] $28 : 80564000 8fc09e38 00000001 8eec41e0 [ 72.590869] Hi : 00000001 [ 72.596582] Lo : 00000000 [ 72.602319] epc : 8eec4240 mt7615_mac_fill_rx+0xac/0x494 [mt7615e] [ 72.614953] ra : 8eec41e0 mt7615_mac_fill_rx+0x4c/0x494 [mt7615e] [ 72.627580] Status: 11008403 KERNEL EXL IE [ 72.635899] Cause : 40800008 (ExcCode 02) [ 72.643860] BadVA : 00000004 [ 72.649573] PrId : 0001992f (MIPS 1004Kc) [ 72.657704] Modules linked in: mt7615e pppoe ppp_async pppox ppp_generic nf_conntrack_ipv6 mt76x2e mt76x2_common mt76x02_lib mt7603e mt76 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_mu] [ 72.792717] Process swapper/0 (pid: 0, threadinfo=80564000, task=805769e0, tls=00000000) [ 72.808799] Stack : 8f0c7800 00000800 8f0c7800 8032b874 00000000 40000000 8f704d80 8ee615a0 [ 72.825428] 8dc88010 00000001 8ee615e0 8eec09b0 8dc88010 8032b914 8f3aee80 80567d20 [ 72.842055] 00000000 8ee615e0 40000000 8f0c7800 00000108 8eec9944 00000000 00000000 [ 72.858682] 80508f10 80510000 00000001 80567d20 8ee615a0 00000000 00000000 8ee61c00 [ 72.875308] 8ee61c40 00000040 80610000 80580000 00000000 8ee615dc 8ee61a68 00000001 [ 72.891936] ... [ 72.896793] Call Trace: [ 72.901649] [<8eec4240>] mt7615_mac_fill_rx+0xac/0x494 [mt7615e] [ 72.913602] [<8eec09b0>] mt7615_queue_rx_skb+0xe4/0x12c [mt7615e] [ 72.925734] [<8eec9944>] mt76_dma_cleanup+0x390/0x42c [mt76] [ 72.936988] Code: ae020018 8ea20004 24030001 <94420004> a602002a 8ea20004 90420000 14430003 a2020034 [ 72.956390] [ 72.959676] ---[ end trace f176967739edb19f ]--- Fixes: 04b8e65922f6 ("mt76: add mac80211 driver for MT7615 PCIe-based chipsets") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25mt76: mt76x02: fix edcca file permissionLorenzo Bianconi1-1/+1
Use 0600 as edcca file permission in mt76x02 debugfs Fixes: 643749d4a82b ("mt76: mt76x02: disable ED/CCA by default") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25mt76: mt7603: add debugfs knob to enable/disable edccaLorenzo Bianconi4-4/+39
Introduce a knob in mt7603 debugfs in order to enable/disable energy detection based on CCA thresholds Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25mt76: mt76x02: run mt76x02_edcca_init atomically in mt76_edcca_setLorenzo Bianconi3-0/+15
Run mt76x02_edcca_init atomically in mt76_edcca_set since it runs concurrently with calibration work and mt76x2_set_channel. Moreover perform phy calibration atomically Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25mt76: mt76x2: move mutex_lock inside mt76x2_set_channelLorenzo Bianconi2-17/+21
This is a preliminary patch to run mt76x02_edcca_init atomically Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25mt76: mt76x2u: remove mt76x02_edcca_init in mt76x2u_set_channelLorenzo Bianconi1-1/+0
Remove mt76x02_edcca_init in mt76x2u_set_channel since it is already run by mt76x2u_phy_channel_calibrate performing channel calibration Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25mt76: mt76x02: remove enable from mt76x02_edcca_init signatureLorenzo Bianconi8-9/+9
Remove enable parameter from mt76x02_edcca_init routine signature since it is always true Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25mt76: mt7615: add static qualifier to mt7615_rx_poll_completeLorenzo Bianconi2-2/+2
Make mt7615_rx_poll_complete static since it is used just in pci.c to initialize rx_poll_complete function pointer Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25mt76: mt7615: rearrange cleanup operations in mt7615_unregister_deviceLorenzo Bianconi1-4/+5
Cleanup tx/rx napi before releasing pending idrs. Moreover unmap txwi_cache running mt76_free_device routine Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25mt76: mt7603: stop mac80211 queues before setting the channelLorenzo Bianconi1-1/+4
Suspend data transmission during channel switch Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25mt7615: mcu: run __mt76_mcu_send_msg in mt7615_mcu_send_firmwareLorenzo Bianconi1-10/+5
Run __mt76_mcu_send_msg instead of __mt7615_mcu_msg_send and remove duplicated code. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25mt7615: mcu: init mcu_restart function pointerLorenzo Bianconi1-4/+5
Use common function wrapper in mt7615_mcu_exit since the code is shared with m7603 driver Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25mt7615: initialize mt76_mcu_ops data structureLorenzo Bianconi1-34/+40
Use __mt76_mcu_send_msg wrapper instead of mt7615_mcu_msg_send. This is a preliminary patch for mt7615-mt7603 mcu code unification Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25mt7615: mcu: use standard signature for mt7615_mcu_msg_sendLorenzo Bianconi2-296/+337
Use mt76 common signature for mt7615_mcu_msg_send. Move skb allocation in mt7615_mcu_msg_send and remove duplicated code. Remove __mt7615_mcu_set_wtbl and __mt7615_mcu_set_sta_rec since now are used just to send mcu msgs. This is a preliminary patch for mt7615-mt7603 mcu code unification Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25mt7615: mcu: remove unused structure in mcu.hLorenzo Bianconi1-30/+0
Remove following struct no longer used: - dev_info - bss_info - bss_info_tag_handler Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25mt7615: mcu: do not use function pointers whenever possibleLorenzo Bianconi1-115/+105
Remove function pointers in mt7615_mcu_set_bss_info and run function directly. Moreover remove __mt7615_mcu_set_bss_info since it is run just by mt7615_mcu_set_bss_info and remove duplicated istructions Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25mt7615: mcu: unify __mt7615_mcu_set_dev_info and mt7615_mcu_set_dev_infoLorenzo Bianconi2-57/+38
Unify mt7615_mcu_set_dev_info and __mt7615_mcu_set_dev_info since the latter is run just by mt7615_mcu_set_dev_info Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25mt7615: mcu: remove skb_ret from mt7615_mcu_msg_sendLorenzo Bianconi1-53/+24
Remove skb_ret parameter from mt7615_mcu_msg_send signature since it is actually used just by mt7615_mcu_patch_sem_ctrl. This is a prelimanry patch to use mt76 common mcu API Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25mt7615: remove dest from mt7615_mcu_msg_send signatureLorenzo Bianconi1-34/+22
Remove dest parameter from mt7615_mcu_msg_send/__mt7615_mcu_msg_send routine signature since it can is always set to MCU_S2D_H2N Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25mt7615: remove query from mt7615_mcu_msg_send signatureLorenzo Bianconi1-27/+26
Remove query parameter from mt7615_mcu_msg_send routine signature since it can be obtained from cmd value Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25mt7615: mcu: remove unused parameter in mt7615_mcu_del_wtblLorenzo Bianconi3-4/+3
Remove unused vif parameter in mt7615_mcu_del_wtbl signature Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25mt7615: mcu: unify mt7615_mcu_add_wtbl_bmc and mt7615_mcu_del_wtbl_bmcLorenzo Bianconi3-17/+14
Remove duplicated code in mt7615_bss_info_changed Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25mt7615: mcu: use proper msg size in mt7615_mcu_add_wtblLorenzo Bianconi1-30/+24
Use proper mcu message size in mt7615_mcu_add_wtbl and do not allocate a huge buffer. Moreover use stack memory instead of heap one Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25mt7615: mcu: use proper msg size in mt7615_mcu_add_wtbl_bmcLorenzo Bianconi1-30/+24
Use proper mcu message size in mt7615_mcu_add_wtbl_bmc and do not allocate a huge buffer. Moreover use stack memory instead of heap one Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25mt7615: mcu: remove bss_info_convert_vif_type routineLorenzo Bianconi1-46/+27
Remove bss_info_convert_vif_type routine since it is run just in mt7615_mcu_set_bss_info and the switch over vif->type is already there. Simplify mt7615_mcu_set_bss_info routine Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25mt7615: mcu: simplify __mt7615_mcu_set_sta_recLorenzo Bianconi1-30/+21
Do not loop over cmd payload in __mt7615_mcu_set_sta_rec since it is already done in before running __mt7615_mcu_set_sta_rec (e.g. mt7615_mcu_set_sta_rec) Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25mt7615: mcu: simplify __mt7615_mcu_set_wtblLorenzo Bianconi1-36/+26
Do not loop over cmd payload in __mt7615_mcu_set_wtbl since it is already done in before running __mt7615_mcu_set_wtbl (e.g. mt7615_mcu_set_wtbl_key) Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25mt76: mt7615: Make mt7615_irq_handler staticYueHaibing1-1/+1
Fix sparse warning: drivers/net/wireless/mediatek/mt76/mt7615/pci.c:37:13: warning: symbol 'mt7615_irq_handler' was not declared. Should it be static? Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25mt76: mt7615: Use after free in mt7615_mcu_set_bcn()Dan Carpenter1-1/+1
We dereference "skb" when we assign: req.pkt_len = cpu_to_le16(MT_TXD_SIZE + skb->len); ^^^^^^^^ So this patch just moves the dev_kfree_skb() down a bit to avoid the use after free. Fixes: 04b8e65922f6 ("mt76: add mac80211 driver for MT7615 PCIe-based chipsets") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25mt76: Fix a signedness bug in mt7615_add_interface()Dan Carpenter1-2/+3
The problem is that "mvif->omac_idx" is a u8 so it can't be negative and the error handling won't work. The get_omac_idx() function returns -1 on error. Fixes: 04b8e65922f6 ("mt76: add mac80211 driver for MT7615 PCIe-based chipsets") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25mt76: move netif_napi_del in mt76_dma_cleanupLorenzo Bianconi4-3/+1
Move netif_napi_del in mt76_dma_cleanup routine since it is done by all drivers Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25mt76: mt7615: use napi polling for tx cleanupLorenzo Bianconi2-3/+23
This allows tx scheduling and tx cleanup to run concurrently Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25mt76: mt7603: use napi polling for tx cleanupLorenzo Bianconi3-5/+31
This allows tx scheduling and tx cleanup to run concurrently Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25mt76: move tx_napi in mt76_devLorenzo Bianconi3-10/+11
Move tx_napi in mt76_dev data structure in order to implement concurrency between tx scheduling and tx cleanup in mt7603 and mt7615 drivers Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25mt76: mt76x02: remove useless return in mt76x02_resync_beacon_timerLorenzo Bianconi1-3/+1
Remove useless return statment in mt76x02_resync_beacon_timer routine Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25airo: switch to skcipher interfaceArd Biesheuvel2-30/+29
The AIRO driver applies a ctr(aes) on a buffer of considerable size (2400 bytes), and instead of invoking the crypto API to handle this in its entirety, it open codes the counter manipulation and invokes the AES block cipher directly. Let's fix this, by switching to the sync skcipher API instead. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-25rt2800: do not enable watchdog by defaultStanislaw Gruszka3-3/+12
Make watchdog disabled by default and add module parameter to enable it. User will have to create file in /etc/modprobe.d/ with options rt2800lib watchdog=1 to enable the watchdog or load "rt2800lib watchdog=1" module manually before loading rt2800{soc,pci,usb} module. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-25rt2x00: add restart hwStanislaw Gruszka4-2/+54
Add ieee80211_restart_hw() to watchdog and debugfs file for testing if restart works as expected. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-25rt2800: do not nullify initialization vector dataStanislaw Gruszka1-5/+4
If we restart hw we should keep existing IV (initialization vector) otherwise HW encryption will be broken after restart. Also fix some coding style issues on the way. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-25rt2800: add pre_reset_hw callbackStanislaw Gruszka6-0/+24
Add routine to cleanup interfaces data before hw reset as ieee80211_restart_hw() will do setup interfaces again. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-25rt2800: initial watchdog implementationStanislaw Gruszka6-0/+67
Add watchdog for rt2800 devices. For now it only detect hung and print error. [Note: I verified that printing messages from process context is fine on MT7620 (WT3020) platform that have problem when printk is called from interrupt context]. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-25rt2800: add helpers for reading dma done indexStanislaw Gruszka6-0/+52
For mmio we do not properlly trace dma done Q_INDEX_DMA_DONE index for TX queues. That would require implementing INT_SOURCE_CSR_*_DMA_DONE interrupts, what is rather not worth to do due to adding extra CPU load (small but still somewhat not necessary otherwise). We can just read TX DMA done indexes from registers directly. What will be used by watchdog. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-25rt2x00: allow to specify watchdog intervalStanislaw Gruszka2-4/+10
Allow subdriver to change watchdog interval by intialize link->watchdog_interval value before rt2x00link_register(). Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-25p54: remove dead branch in op_conf_tx callbackChristian Lamparter1-6/+3
This patch removes the error branch for (queue > dev->queues). It is no longer needed anymore as the "queue" value is validated by cfg80211's parse_txq_params() before the driver code gets called. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-27 10:34:47 +0300