| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
KVM VMX change for 6.13
- Remove __invept()'s unused @gpa param, which was left behind when KVM
dropped code for invalidating a specific GPA (Intel never officially
documented support for single-address INVEPT; presumably pre-production
CPUs supported it at some point).
|
|
KVM selftests changes for 6.13
- Enable XFAM-based features by default for all selftests VMs, which will
allow removing the "no AVX" restriction.
|
|
KVM x86 MMU changes for 6.13
- Cleanup KVM's handling of Accessed and Dirty bits to dedup code, improve
documentation, harden against unexpected changes, and to simplify
A/D-disabled MMUs by using the hardware-defined A/D bits to track if a
PFN is Accessed and/or Dirty.
- Elide TLB flushes when aging SPTEs, as has been done in x86's primary
MMU for over 10 years.
- Batch TLB flushes when zapping collapsible TDP MMU SPTEs, i.e. when
dirty logging is toggled off, which reduces the time it takes to disable
dirty logging by ~3x.
- Recover huge pages in-place in the TDP MMU instead of zapping the SP
and waiting until the page is re-accessed to create a huge mapping.
Proactively installing huge pages can reduce vCPU jitter in extreme
scenarios.
- Remove support for (poorly) reclaiming page tables in shadow MMUs via
the primary MMU's shrinker interface.
|
|
KVM generic changes for 6.13
- Rework kvm_vcpu_on_spin() to use a single for-loop instead of making two
partial poasses over "all" vCPUs. Opportunistically expand the comment
to better explain the motivation and logic.
- Protect vcpu->pid accesses outside of vcpu->mutex with a rwlock instead
of RCU, so that running a vCPU on a different task doesn't encounter
long stalls due to having to wait for all CPUs become quiescent.
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
- second part of the ucontrol selftest
- cpumodel sanity check selftest
- gen17 cpumodel changes
|
|
Check if the PFCR query reported in userspace coincides with the
kernel reported function list. Right now we don't mask the functions
in the kernel so they have to be the same.
Signed-off-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Hariharan Mari <hari55@linux.ibm.com>
Link: https://lore.kernel.org/r/20241107152319.77816-5-brueckner@linux.ibm.com
[frankja@linux.ibm.com: Added commit description]
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20241107152319.77816-5-brueckner@linux.ibm.com>
|
|
Add gen17 facilities and let KVM_CAP_S390_VECTOR_REGISTERS handle
the enablement of the vector extension facilities.
Signed-off-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Link: https://lore.kernel.org/r/20241107152319.77816-4-brueckner@linux.ibm.com
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20241107152319.77816-4-brueckner@linux.ibm.com>
|
|
Message-security-assist 11 introduces pckmo subfunctions to encrypt
hmac keys.
Signed-off-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Link: https://lore.kernel.org/r/20241107152319.77816-3-brueckner@linux.ibm.com
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20241107152319.77816-3-brueckner@linux.ibm.com>
|
|
Adding support for concurrent-functions facility which provides
additional subfunctions.
Signed-off-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Link: https://lore.kernel.org/r/20241107152319.77816-2-brueckner@linux.ibm.com
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20241107152319.77816-2-brueckner@linux.ibm.com>
|
|
The length of the interrupt parameters (IP) are:
a: 2 bytes
b: 4 bytes
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Link: https://lore.kernel.org/r/20241107141024.238916-6-schlameuss@linux.ibm.com
[frankja@linux.ibm.com: Fixed patch prefix]
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20241107141024.238916-6-schlameuss@linux.ibm.com>
|
|
Checkpatch thinks that we're doing a multiplication but we're obviously
not. Fix 4 instances where we adhered to wrong checkpatch advice.
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20241107141024.238916-5-schlameuss@linux.ibm.com
[frankja@linux.ibm.com: Fixed patch prefix]
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20241107141024.238916-5-schlameuss@linux.ibm.com>
|
|
Add a test case verifying KVM_SET_USER_MEMORY_REGION and
KVM_SET_USER_MEMORY_REGION2 cannot be executed on ucontrol VMs.
Executing this test case on not patched kernels will cause a null
pointer dereference in the host kernel.
This is fixed with commit:
commit 7816e58967d0 ("kvm: s390: Reject memory region operations for ucontrol VMs")
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20241107141024.238916-4-schlameuss@linux.ibm.com
[frankja@linux.ibm.com: Fixed patch prefix]
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20241107141024.238916-4-schlameuss@linux.ibm.com>
|
|
Add a test case manipulating s390 storage keys from within the ucontrol
VM.
Storage key instruction (ISKE, SSKE and RRBE) intercepts and
Keyless-subset facility are disabled on first use, where the skeys are
setup by KVM in non ucontrol VMs.
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Link: https://lore.kernel.org/r/20241108091620.289406-1-schlameuss@linux.ibm.com
Acked-by: Janosch Frank <frankja@linux.ibm.com>
[frankja@linux.ibm.com: Fixed patch prefix]
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20241108091620.289406-1-schlameuss@linux.ibm.com>
|
|
Add a test case verifying basic running and interaction of ucontrol VMs.
Fill the segment and page tables for allocated memory and map memory on
first access.
* uc_map_unmap
Store and load data to mapped and unmapped memory and use pic segment
translation handling to map memory on access.
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link:
https://lore.kernel.org/r/20241107141024.238916-2-schlameuss@linux.ibm.com
[frankja@linux.ibm.com: Fixed patch prefix]
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20241107141024.238916-2-schlameuss@linux.ibm.com>
|
|
KVM/riscv changes for 6.13
- Accelerate KVM RISC-V when running as a guest
- Perf support to collect KVM guest statistics from host side
|
|
In kvm_riscv_vcpu_sbi_init() the entry->ext_idx can contain an
out-of-bound index. This is used as a special marker for the base
extensions, that cannot be disabled. However, when traversing the
extensions, that special marker is not checked prior indexing the
array.
Add an out-of-bounds check to the function.
Fixes: 56d8a385b605 ("RISC-V: KVM: Allow some SBI extensions to be disabled by default")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20241104191503.74725-1-bjorn@kernel.org
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
In the section "4.7 Precise effects on interrupt-pending bits"
of the RISC-V AIA specification defines that:
"If the source mode is Level1 or Level0 and the interrupt domain
is configured in MSI delivery mode (domaincfg.DM = 1):
The pending bit is cleared whenever the rectified input value is
low, when the interrupt is forwarded by MSI, or by a relevant
write to an in_clrip register or to clripnum."
Update the aplic_write_pending() to match the spec.
Fixes: d8dd9f113e16 ("RISC-V: KVM: Fix APLIC setipnum_le/be write emulation")
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20241029085542.30541-1-yongxuan.wang@sifive.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Drop the per-VM zapped_obsolete_pages list now that the usage from the
defunct mmu_shrinker is gone, and instead use a local list to track pages
in kvm_zap_obsolete_pages(), the sole remaining user of
zapped_obsolete_pages.
Opportunistically add an assertion to verify and document that slots_lock
must be held, i.e. that there can only be one active instance of
kvm_zap_obsolete_pages() at any given time, and by doing so also prove
that using a local list instead of a per-VM list doesn't change any
functionality (beyond trivialities like list initialization).
Signed-off-by: Vipin Sharma <vipinsh@google.com>
Link: https://lore.kernel.org/r/20241101201437.1604321-2-vipinsh@google.com
[sean: split to separate patch, write changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Remove KVM's MMU shrinker and (almost) all of its related code, as the
current implementation is very disruptive to VMs (if it ever runs),
without providing any meaningful benefit[1].
Alternatively, KVM could repurpose its shrinker, e.g. to reclaim pages
from the per-vCPU caches[2], but given that no one has complained about
lack of TDP MMU support for the shrinker in the 3+ years since the TDP MMU
was enabled by default, it's safe to say that there is likely no real use
case for initiating reclaim of KVM's page tables from the shrinker.
And while clever/cute, reclaiming the per-vCPU caches doesn't scale the
same way that reclaiming in-use page table pages does. E.g. the amount of
memory being used by a VM doesn't always directly correlate with the
number vCPUs, and even when it does, reclaiming a few pages from per-vCPU
caches likely won't make much of a dent in the VM's total memory usage,
especially for VMs with huge amounts of memory.
Lastly, if it turns out that there is a strong use case for dropping the
per-vCPU caches, re-introducing the shrinker registration is trivial
compared to the complexity of actually reclaiming pages from the caches.
[1] https://lore.kernel.org/lkml/Y45dldZnI6OIf+a5@google.com
[2] https://lore.kernel.org/kvm/20241004195540.210396-3-vipinsh@google.com
Suggested-by: Sean Christopherson <seanjc@google.com>
Suggested-by: David Matlack <dmatlack@google.com>
Signed-off-by: Vipin Sharma <vipinsh@google.com>
Link: https://lore.kernel.org/r/20241101201437.1604321-2-vipinsh@google.com
[sean: keep zapped_obsolete_pages for now, massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
WARN and bail out of recover_huge_pages_range() if dirty logging is
enabled. KVM shouldn't be recovering huge pages during dirty logging
anyway, since KVM needs to track writes at 4KiB. However it's not out of
the possibility that that changes in the future.
If KVM wants to recover huge pages during dirty logging, make_huge_spte()
must be updated to write-protect the new huge page mapping. Otherwise,
writes through the newly recovered huge page mapping will not be tracked.
Note that this potential risk did not exist back when KVM zapped to
recover huge page mappings, since subsequent accesses would just be
faulted in at PG_LEVEL_4K if dirty logging was enabled.
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20240823235648.3236880-7-dmatlack@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Rename make_huge_page_split_spte() to make_small_spte(). This ensures
that the usage of "small_spte" and "huge_spte" are consistent between
make_huge_spte() and make_small_spte().
This should also reduce some confusion as make_huge_page_split_spte()
almost reads like it will create a huge SPTE, when in fact it is
creating a small SPTE to split the huge SPTE.
No functional change intended.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20240823235648.3236880-6-dmatlack@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Recover TDP MMU huge page mappings in-place instead of zapping them when
dirty logging is disabled, and rename functions that recover huge page
mappings when dirty logging is disabled to move away from the "zap
collapsible spte" terminology.
Before KVM flushes TLBs, guest accesses may be translated through either
the (stale) small SPTE or the (new) huge SPTE. This is already possible
when KVM is doing eager page splitting (where TLB flushes are also
batched), and when vCPUs are faulting in huge mappings (where TLBs are
flushed after the new huge SPTE is installed).
Recovering huge pages reduces the number of page faults when dirty
logging is disabled:
$ perf stat -e kvm:kvm_page_fault -- ./dirty_log_perf_test -s anonymous_hugetlb_2mb -v 64 -e -b 4g
Before: 393,599 kvm:kvm_page_fault
After: 262,575 kvm:kvm_page_fault
vCPU throughput and the latency of disabling dirty-logging are about
equal compared to zapping, but avoiding faults can be beneficial to
remove vCPU jitter in extreme scenarios.
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20240823235648.3236880-5-dmatlack@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Refactor the TDP MMU iterator "need resched" checks into a helper
function so they can be called from a different code path in a
subsequent commit.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20240823235648.3236880-4-dmatlack@google.com
[sean: rebase on a swapped order of checks]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
KVM_MMU_WARN_ON
Convert the WARN in tdp_mmu_iter_cond_resched() that the iterator hasn't
already yielded to a KVM_MMU_WARN_ON() so the code is compiled out for
production kernels (assuming production kernels disable KVM_PROVE_MMU).
Checking for a needed reschedule is a hot path, and KVM sanity checks
iter->yielded in several other less-hot paths, i.e. the odds of KVM not
flagging that something went sideways are quite low. Furthermore, the
odds of KVM not noticing *and* the WARN detecting something worth
investigating are even lower.
Link: https://lore.kernel.org/r/20241031170633.1502783-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Swap the order of the checks in tdp_mmu_iter_cond_resched() so that KVM
checks to see if a resched is needed _before_ checking to see if yielding
must be disallowed to guarantee forward progress. Iterating over TDP MMU
SPTEs is a hot path, e.g. tearing down a root can touch millions of SPTEs,
and not needing to reschedule is by far the common case. On the other
hand, disallowing yielding because forward progress has not been made is a
very rare case.
Returning early for the common case (no resched), effectively reduces the
number of checks from 2 to 1 for the common case, and should make the code
slightly more predictable for the CPU.
To resolve a weird conundrum where the forward progress check currently
returns false, but the need resched check subtly returns iter->yielded,
which _should_ be false (enforced by a WARN), return false unconditionally
(which might also help make the sequence more predictable). If KVM has a
bug where iter->yielded is left danging, continuing to yield is neither
right nor wrong, it was simply an artifact of how the original code was
written.
Unconditionally returning false when yielding is unnecessary or unwanted
will also allow extracting the "should resched" logic to a separate helper
in a future patch.
Cc: David Matlack <dmatlack@google.com>
Reviewed-by: James Houghton <jthoughton@google.com>
Link: https://lore.kernel.org/r/20241031170633.1502783-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Verify that KVM's supported XCR0 includes AVX (and earlier features) when
running the SEV-ES VMSA XSAVE test. In practice, the issue will likely
never pop up, since KVM support for AVX predates KVM support for SEV-ES,
but checking for KVM support makes the requirement more obvious.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20241003234337.273364-12-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Now that CR4.OSXSAVE and XCR0 are setup by default, drop the manual
enabling from the SEV smoke test that validates FPU state can be
transferred into the VMSA.
In guest_code_xsave(), explicitly set the Requested-Feature Bitmask (RFBM)
to exactly XFEATURE_MASK_X87_AVX instead of relying on the host side of
things to enable only X87_AVX features in guest XCR0. I.e. match the RFBM
for the host XSAVE.
Link: https://lore.kernel.org/r/20241003234337.273364-11-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Now that CR4.OSXSAVE and XCR0 are setup by default, drop the manual
enabling from the state test, which is fully redundant with the default
behavior.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20241003234337.273364-10-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Now that CR4.OSXSAVE and XCR0 are setup by default, drop the manual
enabling of OXSAVE and XTILE from the AMX test.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20241003234337.273364-9-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Now that CR4.OSXSAVE is enabled by default, drop the manual enabling from
CR4/CPUID sync test and instead assert that CR4.OSXSAVE is enabled.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20241003234337.273364-8-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Now that KVM selftests enable all supported XCR0 features by default, add
a testcase to the XCR0 vs. CPUID test to verify that the guest can disable
everything except the legacy FPU in XCR0, and then re-enable the full
feature set, which is kinda sorta what the test did before XCR0 was setup
by default.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20241003234337.273364-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
To play nice with compilers generating AVX instructions, set CR4.OSXSAVE
and configure XCR0 by default when creating selftests vCPUs. Some distros
have switched gcc to '-march=x86-64-v3' by default, and while it's hard to
find a CPU which doesn't support AVX today, many KVM selftests fail with
==== Test Assertion Failure ====
lib/x86_64/processor.c:570: Unhandled exception in guest
pid=72747 tid=72747 errno=4 - Interrupted system call
Unhandled exception '0x6' at guest RIP '0x4104f7'
due to selftests not enabling AVX by default for the guest. The failure
is easy to reproduce elsewhere with:
$ make clean && CFLAGS='-march=x86-64-v3' make -j && ./x86_64/kvm_pv_test
E.g. gcc-13 with -march=x86-64-v3 compiles this chunk from selftests'
kvm_fixup_exception():
regs->rip = regs->r11;
regs->r9 = regs->vector;
regs->r10 = regs->error_code;
into this monstronsity (which is clever, but oof):
405313: c4 e1 f9 6e c8 vmovq %rax,%xmm1
405318: 48 89 68 08 mov %rbp,0x8(%rax)
40531c: 48 89 e8 mov %rbp,%rax
40531f: c4 c3 f1 22 c4 01 vpinsrq $0x1,%r12,%xmm1,%xmm0
405325: 49 89 6d 38 mov %rbp,0x38(%r13)
405329: c5 fa 7f 45 00 vmovdqu %xmm0,0x0(%rbp)
Alternatively, KVM selftests could explicitly restrict the compiler to
-march=x86-64-v2, but odds are very good that punting on AVX enabling will
simply result in tests that "need" AVX doing their own thing, e.g. there
are already three or so additional cleanups that can be done on top.
Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Closes: https://lore.kernel.org/all/20240920154422.2890096-1-vkuznets@redhat.com
Reviewed-and-tested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20241003234337.273364-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Rework the CR4/CPUID sync test to clear CR4.OSXSAVE, do CPUID, and restore
CR4.OSXSAVE in assembly, so that there is zero chance of AVX instructions
being executed while CR4.OSXSAVE is disabled. This will allow enabling
CR4.OSXSAVE by default for selftests vCPUs as a general means of playing
nice with AVX instructions.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20241003234337.273364-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Mask off OSPKE and OSXSAVE, which are toggled based on corresponding CR4
enabling bits, when comparing vCPU CPUID against KVM's supported CPUID.
This will allow setting OSXSAVE by default when creating vCPUs, without
causing test failures (KVM doesn't enumerate OSXSAVE=1).
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20241003234337.273364-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
When comparing vCPU CPUID entries against KVM's supported CPUID, mask off
only the dynamic fields/bits instead of skipping the entire entry.
Precisely masking bits isn't meaningfully more difficult than skipping
entire entries, and will be necessary to maintain test coverage when a
future commit enables OSXSAVE by default, i.e. makes one bit in all of
CPUID.0x1 dynamic.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20241003234337.273364-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Set SPTEs directly to SHADOW_NONPRESENT_VALUE and batch up TLB flushes
when zapping collapsible SPTEs, rather than freezing them first.
Freezing the SPTE first is not required. It is fine for another thread
holding mmu_lock for read to immediately install a present entry before
TLBs are flushed because the underlying mapping is not changing. vCPUs
that translate through the stale 4K mappings or a new huge page mapping
will still observe the same GPA->HPA translations.
KVM must only flush TLBs before dropping RCU (to avoid use-after-free of
the zapped page tables) and before dropping mmu_lock (to synchronize
with mmu_notifiers invalidating mappings).
In VMs backed with 2MiB pages, batching TLB flushes improves the time it
takes to zap collapsible SPTEs to disable dirty logging:
$ ./dirty_log_perf_test -s anonymous_hugetlb_2mb -v 64 -e -b 4g
Before: Disabling dirty logging time: 14.334453428s (131072 flushes)
After: Disabling dirty logging time: 4.794969689s (76 flushes)
Skipping freezing SPTEs also avoids stalling vCPU threads on the frozen
SPTE for the time it takes to perform a remote TLB flush. vCPUs faulting
on the zapped mapping can now immediately install a new huge mapping and
proceed with guest execution.
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20240823235648.3236880-3-dmatlack@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Drop the @max_level parameter from kvm_mmu_max_mapping_level(). All
callers pass in PG_LEVEL_NUM, so @max_level can be replaced with
PG_LEVEL_NUM in the function body.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20240823235648.3236880-2-dmatlack@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Follow x86's primary MMU, which hasn't flushed TLBs when clearing Accessed
bits for 10+ years, and skip all TLB flushes when aging SPTEs in response
to a clear_flush_young() mmu_notifier event. As documented in x86's
ptep_clear_flush_young(), the probability and impact of "bad" reclaim due
to stale A-bit information is relatively low, whereas the performance cost
of TLB flushes is relatively high. I.e. the cost of flushing TLBs
outweighs the benefits.
On KVM x86, the cost of TLB flushes is even higher, as KVM doesn't batch
TLB flushes for mmu_notifier events (KVM's mmu_notifier contract with MM
makes it all but impossible), and sending IPIs forces all running vCPUs to
go through a VM-Exit => VM-Enter roundtrip.
Furthermore, MGLRU aging of secondary MMUs is expected to use flush-less
mmu_notifiers, i.e. flushing for the !MGLRU will make even less sense, and
will be actively confusing as it wouldn't be clear why KVM "needs" to
flush TLBs for legacy LRU aging, but not for MGLRU aging.
Cc: James Houghton <jthoughton@google.com>
Cc: Yan Zhao <yan.y.zhao@intel.com>
Link: https://lore.kernel.org/all/20240926013506.860253-18-jthoughton@google.com
Link: https://lore.kernel.org/r/20241011021051.1557902-19-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add a Kconfig to allow architectures to opt-out of a TLB flush when a
young page is aged, as invalidating TLB entries is not functionally
required on most KVM-supported architectures. Stale TLB entries can
result in false negatives and theoretically lead to suboptimal reclaim,
but in practice all observations have been that the performance gained by
skipping TLB flushes outweighs any performance lost by reclaiming hot
pages.
E.g. the primary MMUs for x86 RISC-V, s390, and PPC Book3S elide the TLB
flush for ptep_clear_flush_young(), and arm64's MMU skips the trailing DSB
that's required for ordering (presumably because there are optimizations
related to eliding other TLB flushes when doing make-before-break).
Link: https://lore.kernel.org/r/20241011021051.1557902-18-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
disabled
When making a SPTE, set the Dirty bit in the SPTE as appropriate, even if
hardware A/D bits are disabled. Only EPT allows A/D bits to be disabled,
and for EPT, the bits are software-available (ignored by hardware) when
A/D bits are disabled, i.e. it is perfectly legal for KVM to use the Dirty
to track dirty pages in software.
Link: https://lore.kernel.org/r/20241011021051.1557902-17-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Now that the shadow MMU and TDP MMU have identical logic for detecting
required TLB flushes when updating SPTEs, move said logic to a helper so
that the TDP MMU code can benefit from the comments that are currently
exclusive to the shadow MMU.
No functional change intended.
Link: https://lore.kernel.org/r/20241011021051.1557902-16-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Return immediately if a young SPTE is found when testing, but not updating,
SPTEs. The return value is a boolean, i.e. whether there is one young SPTE
or fifty is irrelevant (ignoring the fact that it's impossible for there to
be fifty SPTEs, as KVM has a hard limit on the number of valid TDP MMU
roots).
Link: https://lore.kernel.org/r/20241011021051.1557902-15-seanjc@google.com
[sean: use guard(rcu)(), as suggested by Paolo]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Skip invalid TDP MMU roots when aging a gfn range. There is zero reason
to process invalid roots, as they by definition hold stale information.
E.g. if a root is invalid because its from a previous memslot generation,
in the unlikely event the root has a SPTE for the gfn, then odds are good
that the gfn=>hva mapping is different, i.e. doesn't map to the hva that
is being aged by the primary MMU.
Link: https://lore.kernel.org/r/20241011021051.1557902-14-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Use the Accessed bit in SPTEs even when A/D bits are disabled in hardware,
i.e. propagate accessed information to SPTE.Accessed even when KVM is
doing manual tracking by making SPTEs not-present. In addition to
eliminating a small amount of code in is_accessed_spte(), this also paves
the way for preserving Accessed information when a SPTE is zapped in
response to a mmu_notifier PROTECTION event, e.g. if a SPTE is zapped
because NUMA balancing kicks in.
Note, EPT is the only flavor of paging in which A/D bits are conditionally
enabled, and the Accessed (and Dirty) bit is software-available when A/D
bits are disabled.
Note #2, there are currently no concrete plans to preserve Accessed
information. Explorations on that front were the initial catalyst, but
the cleanup is the motivation for the actual commit.
Link: https://lore.kernel.org/r/20241011021051.1557902-13-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Set shadow_dirty_mask to the architectural EPT Dirty bit value even if
A/D bits are disabled at the module level, i.e. even if KVM will never
enable A/D bits in hardware. Doing so provides consistent behavior for
Accessed and Dirty bits, i.e. doesn't leave KVM in a state where it sets
shadow_accessed_mask but not shadow_dirty_mask.
Functionally, this should be one big nop, as consumption of
shadow_dirty_mask is always guarded by a check that hardware A/D bits are
enabled.
Link: https://lore.kernel.org/r/20241011021051.1557902-12-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Now that KVM doesn't use shadow_accessed_mask to detect if hardware A/D
bits are enabled, set shadow_accessed_mask for EPT even when A/D bits
are disabled in hardware. This will allow using shadow_accessed_mask for
software purposes, e.g. to preserve accessed status in a non-present SPTE
acros NUMA balancing, if something like that is ever desirable.
Link: https://lore.kernel.org/r/20241011021051.1557902-11-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add a dedicated flag to track if KVM has enabled A/D bits at the module
level, instead of inferring the state based on whether or not the MMU's
shadow_accessed_mask is non-zero. This will allow defining and using
shadow_accessed_mask even when A/D bits aren't used by hardware.
Link: https://lore.kernel.org/r/20241011021051.1557902-10-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Do a remote TLB flush if installing a leaf SPTE overwrites an existing
leaf SPTE (with the same target pfn, which is enforced by a BUG() in
handle_changed_spte()) and clears the MMU-Writable bit. Since the TDP MMU
passes ACC_ALL to make_spte(), i.e. always requests a Writable SPTE, the
only scenario in which make_spte() should create a !MMU-Writable SPTE is
if the gfn is write-tracked or if KVM is prefetching a SPTE.
When write-protecting for write-tracking, KVM must hold mmu_lock for write,
i.e. can't race with a vCPU faulting in the SPTE. And when prefetching a
SPTE, the TDP MMU takes care to avoid clobbering a shadow-present SPTE,
i.e. it should be impossible to replace a MMU-writable SPTE with a
!MMU-writable SPTE when handling a TDP MMU fault.
Cc: David Matlack <dmatlack@google.com>
Cc: Yan Zhao <yan.y.zhao@intel.com>
Link: https://lore.kernel.org/r/20241011021051.1557902-9-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Fold the guts of mmu_spte_update_no_track() into mmu_spte_update() now
that the latter doesn't flush when clearing A/D bits, i.e. now that there
is no need to explicitly avoid TLB flushes when aging SPTEs.
Opportunistically WARN if mmu_spte_update() requests a TLB flush when
aging SPTEs, as aging should never modify a SPTE in such a way that KVM
thinks a TLB flush is needed.
Link: https://lore.kernel.org/r/20241011021051.1557902-8-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Drop the return value from kvm_tdp_mmu_clear_dirty_slot() as its sole
caller ignores the result (KVM flushes after clearing dirty logs based on
the logs themselves, not based on SPTEs).
Cc: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20241011021051.1557902-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
