summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-07-28can: slcan: use KBUILD_MODNAME and define pr_fmt to replace hardcoded namesVincent Mailhol1-6/+8
The driver uses the string "slcan" to populate tty_ldisc_ops::name. KBUILD_MODNAME also evaluates to "slcan". Use KBUILD_MODNAME to get rid on the hardcoded string names. Similarly, the pr_info() and pr_err() hardcoded the "slcan" prefix. Define pr_fmt so that the "slcan" prefix gets automatically added. CC: Dario Binacchi <dario.binacchi@amarulasolutions.com> Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Link: https://lore.kernel.org/all/20220728070254.267974-2-dario.binacchi@amarulasolutions.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-28net: dsa: mv88e6xxx: fix speed setting for CPU/DSA portsMarcin Wojtas1-1/+6
Commit 3c783b83bd0f ("net: dsa: mv88e6xxx: get rid of SPEED_MAX setting") stopped relying on SPEED_MAX constant and hardcoded speed settings for the switch ports and rely on phylink configuration. It turned out, however, that when the relevant code is called, the mac_capabilites of CPU/DSA port remain unset. mv88e6xxx_setup_port() is called via mv88e6xxx_setup() in dsa_tree_setup_switches(), which precedes setting the caps in phylink_get_caps down in the chain of dsa_tree_setup_ports(). As a result the mac_capabilites are 0 and the default speed for CPU/DSA port is 10M at the start. To fix that, execute mv88e6xxx_get_caps() and obtain the capabilities driectly. Fixes: 3c783b83bd0f ("net: dsa: mv88e6xxx: get rid of SPEED_MAX setting") Signed-off-by: Marcin Wojtas <mw@semihalf.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20220726230918.2772378-1-mw@semihalf.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-28Merge branch '100GbE' of ↵Jakub Kicinski5-48/+16
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-07-26 This series contains updates to ice driver only. Przemyslaw corrects accounting for VF VLANs to allow for correct number of VLANs for untrusted VF. He also correct issue with checksum offload on VXLAN tunnels. Ani allows for two VSIs to share the same MAC address. Maciej corrects checked bits for descriptor completion of loopback * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: do not setup vlan for loopback VSI ice: check (DD | EOF) bits on Rx descriptor rather than (EOP | RS) ice: Fix VSIs unable to share unicast MAC ice: Fix tunnel checksum offload with fragmented traffic ice: Fix max VLANs available for VF ==================== Link: https://lore.kernel.org/r/20220726204646.2171589-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-28net: devlink: remove redundant net_eq() check from sb_pool_get_dumpit()Jiri Pirko1-2/+1
The net_eq() check is already performed inside devlinks_xa_for_each_registered_get() helper, so remove the redundant appearance. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20220727055912.568391-1-jiri@resnulli.us Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-28dt-bindings: net: hirschmann,hellcreek: use absolute path to other schemaKrzysztof Kozlowski1-1/+1
Absolute path to other DT schema is preferred over relative one. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Kurt Kanzenbach <kurt@linutronix.de> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220726115650.100726-1-krzysztof.kozlowski@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-28net/sched: sch_cbq: change the type of cbq_set_lss to voidZhengchao Shao1-2/+1
Change the type of cbq_set_lss to void. Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Link: https://lore.kernel.org/r/20220726030748.243505-1-shaozhengchao@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-28sctp: leave the err path free in sctp_stream_init to sctp_stream_freeXin Long2-19/+5
A NULL pointer dereference was reported by Wei Chen: BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: 0010:__list_del_entry_valid+0x26/0x80 Call Trace: <TASK> sctp_sched_dequeue_common+0x1c/0x90 sctp_sched_prio_dequeue+0x67/0x80 __sctp_outq_teardown+0x299/0x380 sctp_outq_free+0x15/0x20 sctp_association_free+0xc3/0x440 sctp_do_sm+0x1ca7/0x2210 sctp_assoc_bh_rcv+0x1f6/0x340 This happens when calling sctp_sendmsg without connecting to server first. In this case, a data chunk already queues up in send queue of client side when processing the INIT_ACK from server in sctp_process_init() where it calls sctp_stream_init() to alloc stream_in. If it fails to alloc stream_in all stream_out will be freed in sctp_stream_init's err path. Then in the asoc freeing it will crash when dequeuing this data chunk as stream_out is missing. As we can't free stream out before dequeuing all data from send queue, and this patch is to fix it by moving the err path stream_out/in freeing in sctp_stream_init() to sctp_stream_free() which is eventually called when freeing the asoc in sctp_association_free(). This fix also makes the code in sctp_process_init() more clear. Note that in sctp_association_init() when it fails in sctp_stream_init(), sctp_association_free() will not be called, and in that case it should go to 'stream_free' err path to free stream instead of 'fail_init'. Fixes: 5bbbbe32a431 ("sctp: introduce stream scheduler foundations") Reported-by: Wei Chen <harperchen1110@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Link: https://lore.kernel.org/r/831a3dc100c4908ff76e5bcc363be97f2778bc0b.1658787066.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-28sfc: disable softirqs for ptp TXAlejandro Lucero1-0/+22
Sending a PTP packet can imply to use the normal TX driver datapath but invoked from the driver's ptp worker. The kernel generic TX code disables softirqs and preemption before calling specific driver TX code, but the ptp worker does not. Although current ptp driver functionality does not require it, there are several reasons for doing so: 1) The invoked code is always executed with softirqs disabled for non PTP packets. 2) Better if a ptp packet transmission is not interrupted by softirq handling which could lead to high latencies. 3) netdev_xmit_more used by the TX code requires preemption to be disabled. Indeed a solution for dealing with kernel preemption state based on static kernel configuration is not possible since the introduction of dynamic preemption level configuration at boot time using the static calls functionality. Fixes: f79c957a0b537 ("drivers: net: sfc: use netdev_xmit_more helper") Signed-off-by: Alejandro Lucero <alejandro.lucero-palau@amd.com> Link: https://lore.kernel.org/r/20220726064504.49613-1-alejandro.lucero-palau@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-28ptp: ocp: Select CRC16 in the Kconfig.Jonathan Lemon1-0/+1
The crc16() function is used to check the firmware validity, but the library was not explicitly selected. Fixes: 3c3673bde50c ("ptp: ocp: Add firmware header checks") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Acked-by: Vadim Fedorenko <vadfed@fb.com> Link: https://lore.kernel.org/r/20220726220604.1339972-1-jonathan.lemon@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-28clk: sunxi-ng: Fix H6 RTC clock definitionJernej Skrabec1-0/+1
While RTC clock was added in H616 ccu_common list, it was not in H6 list. That caused invalid pointer dereference like this: Unable to handle kernel NULL pointer dereference at virtual address 000000000000020c Mem abort info: ESR = 0x96000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=000000004d574000 [000000000000020c] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT SMP CPU: 3 PID: 339 Comm: cat Tainted: G B 5.18.0-rc1+ #1352 Hardware name: Tanix TX6 (DT) pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : ccu_gate_is_enabled+0x48/0x74 lr : ccu_gate_is_enabled+0x40/0x74 sp : ffff80000c0b76d0 x29: ffff80000c0b76d0 x28: 00000000016e3600 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000002 x24: ffff00000952fe08 x23: ffff800009611400 x22: ffff00000952fe79 x21: 0000000000000000 x20: 0000000000000001 x19: ffff80000aad6f08 x18: 0000000000000000 x17: 2d2d2d2d2d2d2d2d x16: 2d2d2d2d2d2d2d2d x15: 2d2d2d2d2d2d2d2d x14: 0000000000000000 x13: 00000000f2f2f2f2 x12: ffff700001816e89 x11: 1ffff00001816e88 x10: ffff700001816e88 x9 : dfff800000000000 x8 : ffff80000c0b7447 x7 : 0000000000000001 x6 : ffff700001816e88 x5 : ffff80000c0b7440 x4 : 0000000000000001 x3 : ffff800008935c50 x2 : dfff800000000000 x1 : 0000000000000000 x0 : 000000000000020c Call trace: ccu_gate_is_enabled+0x48/0x74 clk_core_is_enabled+0x7c/0x1c0 clk_summary_show_subtree+0x1dc/0x334 clk_summary_show_subtree+0x250/0x334 clk_summary_show_subtree+0x250/0x334 clk_summary_show_subtree+0x250/0x334 clk_summary_show_subtree+0x250/0x334 clk_summary_show+0x90/0xdc seq_read_iter+0x248/0x6d4 seq_read+0x17c/0x1fc full_proxy_read+0x90/0xf0 vfs_read+0xdc/0x28c ksys_read+0xc8/0x174 __arm64_sys_read+0x44/0x5c invoke_syscall+0x60/0x190 el0_svc_common.constprop.0+0x7c/0x160 do_el0_svc+0x38/0xa0 el0_svc+0x68/0x160 el0t_64_sync_handler+0x10c/0x140 el0t_64_sync+0x18c/0x190 Code: d1006260 97e5c981 785e8260 8b0002a0 (b9400000) ---[ end trace 0000000000000000 ]--- Fix that by adding rtc clock to H6 ccu_common list too. Fixes: 38d321b61bda ("clk: sunxi-ng: h6-r: Add RTC gate clock") Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220719183725.2605141-1-jernej.skrabec@gmail.com Reviewed-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-07-28regulator: Consumer load management improvementsMark Brown3-12/+52
Merge series from Douglas Anderson <dianders@chromium.org>: The main goal of this series is to make a small dent in cleaning up the way we deal with regulator loads. The idea is to add some extra functionality to the regulator "bulk" API so that consumers can specify the load using that.
2022-07-28exec: Call kmap_local_page() in copy_string_kernel()Fabio M. De Francesco1-5/+1
The use of kmap_atomic() is being deprecated in favor of kmap_local_page(). With kmap_local_page(), the mappings are per thread, CPU local and not globally visible. Furthermore, the mappings can be acquired from any context (including interrupts). Therefore, replace kmap_atomic() with kmap_local_page() in copy_string_kernel(). Instead of open-coding local mapping + memcpy(), use memcpy_to_page(). Delete a redundant call to flush_dcache_page(). Tested with xfstests on a QEMU/ KVM x86_32 VM, 6GB RAM, booting a kernel with HIGHMEM64GB enabled. Suggested-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220724212523.13317-1-fmdefrancesco@gmail.com
2022-07-27kasan: test: Silence GCC 12 warningsKees Cook1-0/+10
GCC 12 continues to get smarter about array accesses. The KASAN tests are expecting to explicitly test out-of-bounds conditions at run-time, so hide the variable from GCC, to avoid warnings like: ../lib/test_kasan.c: In function 'ksize_uaf': ../lib/test_kasan.c:790:61: warning: array subscript 120 is outside array bounds of 'void[120]' [-Warray-bounds] 790 | KUNIT_EXPECT_KASAN_FAIL(test, ((volatile char *)ptr)[size]); | ~~~~~~~~~~~~~~~~~~~~~~^~~~~~ ../lib/test_kasan.c:97:9: note: in definition of macro 'KUNIT_EXPECT_KASAN_FAIL' 97 | expression; \ | ^~~~~~~~~~ Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: kasan-dev@googlegroups.com Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220608214024.1068451-1-keescook@chromium.org
2022-07-27ACPI/PCI: Remove useless NULL pointer checksAndrey Strachuk1-4/+4
Local variable 'p' is initialized by an address of field of acpi_resource, so it does not make sense to compare 'p' with NULL. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Andrey Strachuk <strochuk@ispras.ru> Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-07-27drivers: lkdtm: fix clang -Wformat warningJustin Stitt1-1/+1
When building with Clang we encounter the following warning (ARCH=hexagon + CONFIG_FRAME_WARN=0): | ../drivers/misc/lkdtm/bugs.c:107:3: error: format specifies type | 'unsigned long' but the argument has type 'int' [-Werror,-Wformat] | REC_STACK_SIZE, recur_count); | ^~~~~~~~~~~~~~ Cast REC_STACK_SIZE to `unsigned long` to match format specifier `%lu` as well as maintain symmetry with `#define REC_STACK_SIZE (_AC(CONFIG_FRAME_WARN, UL) / 2)`. Link: https://github.com/ClangBuiltLinux/linux/issues/378 Reported-by: Nathan Chancellor <nathan@kernel.org> Suggested-by: Nathan Chancellor <nathan@kernel.org> Suggested-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Acked-by: Kees Cook <keescook@chromium.org> Fixes: 24cccab42c419 ("lkdtm/bugs: Adjust recursion test to avoid elision") Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220721215706.4153027-1-justinstitt@google.com
2022-07-27selftests/seccomp: Fix compile warning when CC=clangYiFei Zhu1-1/+1
clang has -Wconstant-conversion by default, and the constant 0xAAAAAAAAA (9 As) being converted to an int, which is generally 32 bits, results in the compile warning: clang -Wl,-no-as-needed -Wall -isystem ../../../../usr/include/ -lpthread seccomp_bpf.c -lcap -o seccomp_bpf seccomp_bpf.c:812:67: warning: implicit conversion from 'long' to 'int' changes value from 45812984490 to -1431655766 [-Wconstant-conversion] int kill = kill_how == KILL_PROCESS ? SECCOMP_RET_KILL_PROCESS : 0xAAAAAAAAA; ~~~~ ^~~~~~~~~~~ 1 warning generated. -1431655766 is the expected truncation, 0xAAAAAAAA (8 As), so use this directly in the code to avoid the warning. Fixes: 3932fcecd962 ("selftests/seccomp: Add test for unknown SECCOMP_RET kill behavior") Signed-off-by: YiFei Zhu <zhuyifei@google.com> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220526223407.1686936-1-zhuyifei@google.com
2022-07-27cgroup: remove "no" prefixed mount optionsTejun Heo2-24/+8
30312730bd02 ("cgroup: Add "no" prefixed mount options") added "no" prefixed mount options to allow turning them off and 6a010a49b63a ("cgroup: Make !percpu threadgroup_rwsem operations optional") added one more "no" prefixed mount option. However, Michal pointed out that the "no" prefixed options aren't necessary in allowing mount options to be turned off: # grep group /proc/mounts cgroup2 /sys/fs/cgroup cgroup2 rw,nosuid,nodev,relatime,nsdelegate,memory_recursiveprot 0 0 # mount -o remount,nsdelegate,memory_recursiveprot none /sys/fs/cgroup # grep cgroup /proc/mounts cgroup2 /sys/fs/cgroup cgroup2 rw,relatime,nsdelegate,memory_recursiveprot 0 0 Note that this is different from the remount behavior when the mount(1) is invoked without the device argument - "none": # grep cgroup /proc/mounts cgroup2 /sys/fs/cgroup cgroup2 rw,nosuid,nodev,noexec,relatime,nsdelegate,memory_recursiveprot 0 0 # mount -o remount,nsdelegate,memory_recursiveprot /sys/fs/cgroup # grep cgroup /proc/mounts cgroup2 /sys/fs/cgroup cgroup2 rw,nosuid,nodev,noexec,relatime,nsdelegate,memory_recursiveprot 0 0 While a bit confusing, given that there is a way to turn off the options, there's no reason to have the explicit "no" prefixed options. Let's remove them. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Michal Koutný <mkoutny@suse.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2022-07-27tcp: md5: fix IPv4-mapped supportEric Dumazet1-3/+12
After the blamed commit, IPv4 SYN packets handled by a dual stack IPv6 socket are dropped, even if perfectly valid. $ nstat | grep MD5 TcpExtTCPMD5Failure 5 0.0 For a dual stack listener, an incoming IPv4 SYN packet would call tcp_inbound_md5_hash() with @family == AF_INET, while tp->af_specific is pointing to tcp_sock_ipv6_specific. Only later when an IPv4-mapped child is created, tp->af_specific is changed to tcp_sock_ipv6_mapped_specific. Fixes: 7bbb765b7349 ("net/tcp: Merge TCP-MD5 inbound callbacks") Reported-by: Brian Vazquez <brianvv@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Dmitry Safonov <dima@arista.com> Tested-by: Leonard Crestez <cdleonard@gmail.com> Link: https://lore.kernel.org/r/20220726115743.2759832-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-27ARM: 9216/1: Fix MAX_DMA_ADDRESS overflowFlorian Fainelli1-1/+1
Commit 26f09e9b3a06 ("mm/memblock: add memblock memory allocation apis") added a check to determine whether arm_dma_zone_size is exceeding the amount of kernel virtual address space available between the upper 4GB virtual address limit and PAGE_OFFSET in order to provide a suitable definition of MAX_DMA_ADDRESS that should fit within the 32-bit virtual address space. The quantity used for comparison was off by a missing trailing 0, leading to MAX_DMA_ADDRESS to be overflowing a 32-bit quantity. This was caught thanks to CONFIG_DEBUG_VIRTUAL on the bcm2711 platform where we define a dma_zone_size of 1GB and we have a PAGE_OFFSET value of 0xc000_0000 (CONFIG_VMSPLIT_3G) leading to MAX_DMA_ADDRESS being 0x1_0000_0000 which overflows the unsigned long type used throughout __pa() and then __virt_addr_valid(). Because the virtual address passed to __virt_addr_valid() would now be 0, the function would loudly warn and flood the kernel log, thus making the platform unable to boot properly. Fixes: 26f09e9b3a06 ("mm/memblock: add memblock memory allocation apis") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2022-07-27Merge tag 'asm-generic-fixes-5.19-2' of ↵Linus Torvalds3-3/+12
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic fixes from Arnd Bergmann: "Two more bug fixes for asm-generic, one addressing an incorrect Kconfig symbol reference and another one fixing a build failure for the perf tool on mips and possibly others" * tag 'asm-generic-fixes-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: asm-generic: remove a broken and needless ifdef conditional tools: Fixed MIPS builds due to struct flock re-definition
2022-07-27Merge tag 'soc-fixes-5.19-4' of ↵Linus Torvalds9-10/+14
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "One last set of changes for the soc tree: - fix clock frequency on lan966x - fix incorrect GPIO numbers on some pxa machines - update Baolin's email address" * tag 'soc-fixes-5.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: pxa2xx: Fix GPIO descriptor tables mailmap: update Baolin Wang's email ARM: dts: lan966x: fix sys_clk frequency
2022-07-27Revert "x86/sev: Expose sev_es_ghcb_hv_call() for use by HyperV"Borislav Petkov3-31/+18
This reverts commit 007faec014cb5d26983c1f86fd08c6539b41392e. Now that hyperv does its own protocol negotiation: 49d6a3c062a1 ("x86/Hyper-V: Add SEV negotiate protocol support in Isolation VM") revert this exposure of the sev_es_ghcb_hv_call() helper. Cc: Wei Liu <wei.liu@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by：Tianyu Lan <tiala@microsoft.com> Link: https://lore.kernel.org/r/20220614014553.1915929-1-ltykernel@gmail.com
2022-07-27x86/configs: Update configs in x86_debug.configLukas Bulwahn1-2/+1
Commit 4675ff05de2d ("kmemcheck: rip it out") removed kmemcheck and its corresponding build config KMEMCHECK. Commit 0f620cefd775 ("objtool: Rename "VMLINUX_VALIDATION" -> "NOINSTR_VALIDATION"") renamed the debug config option. Adjust x86_debug.config to those changes in debug configs. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lore.kernel.org/r/20220722121815.27535-1-lukas.bulwahn@gmail.com
2022-07-27Merge tag 'nvme-5.19-2022-07-27' of git://git.infradead.org/nvme into block-5.19Jens Axboe1-0/+2
Pull NVMe fix from Christoph: "nvme fix for Linux 5.19 - yet another duplicate ID quirk (Tobias Gruetzmacher)" * tag 'nvme-5.19-2022-07-27' of git://git.infradead.org/nvme: nvme-pci: Crucial P2 has bogus namespace ids
2022-07-27selftests/bpf: Adjust vmtest.sh to use local kernel configurationDaniel Müller1-19/+34
So far the vmtest.sh script, which can be used as a convenient way to run bpf selftests, has obtained the kernel config safe to use for testing from the libbpf/libbpf GitHub repository [0]. Given that we now have included this configuration into this very repository, we can just consume it from here as well, eliminating the necessity of remote accesses. With this change we adjust the logic in the script to use the configuration from below tools/testing/selftests/bpf/configs/ instead of pulling it over the network. [0] https://github.com/libbpf/libbpf Signed-off-by: Daniel Müller <deso@posteo.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Mykola Lysenko <mykolal@fb.com> Link: https://lore.kernel.org/bpf/20220727001156.3553701-4-deso@posteo.net
2022-07-27selftests/bpf: Copy over libbpf configsDaniel Müller4-0/+471
This change integrates libbpf maintained configurations and black/white lists [0] into the repository, co-located with the BPF selftests themselves. We minimize the kernel configurations to keep future updates as small as possible [1]. Furthermore, we make both kernel configurations build on top of the existing configuration tools/testing/selftests/bpf/config (to be concatenated before build). Lastly, we replaced the terms blacklist & whitelist with denylist and allowlist, respectively. [0] https://github.com/libbpf/libbpf/tree/20f03302350a4143825cedcbd210c4d7112c1898/travis-ci/vmtest/configs [1] https://lore.kernel.org/bpf/20220712212124.3180314-1-deso@posteo.net/T/#m30a53648352ed494e556ac003042a9ad0a8f98c6 Signed-off-by: Daniel Müller <deso@posteo.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Mykola Lysenko <mykolal@fb.com> Link: https://lore.kernel.org/bpf/20220727001156.3553701-3-deso@posteo.net
2022-07-27selftests/bpf: Sort configurationDaniel Müller1-50/+49
This change makes sure to sort the existing minimal kernel configuration containing options required for running BPF selftests alphabetically. Doing so will make it easier to diff it against other configurations, which in turn helps with maintaining disjunct config files that build on top of each other. It also helped identify the CONFIG_IPV6_GRE being set twice and removes one of the occurrences. Lastly, we change NET_CLS_BPF from 'm' to 'y'. Having this option as 'm' will cause failures of the btf_skc_cls_ingress selftest. Signed-off-by: Daniel Müller <deso@posteo.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Mykola Lysenko <mykolal@fb.com> Link: https://lore.kernel.org/bpf/20220727001156.3553701-2-deso@posteo.net
2022-07-27clocksource/drivers/sun5i: Remove unnecessary (void*) conversionsLi zeming1-1/+1
Remove unnecessary void* type castings. Signed-off-by: Li zeming <zeming@nfschina.com> Link: https://lore.kernel.org/r/20220727083751.5540-1-zeming@nfschina.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-07-27dt-bindings: timer: allwinner,sun4i-a10-timer: Add D1 compatibleSamuel Holland1-0/+1
Allwinner D1 contains the usual sun4i MMIO timer device. It contains two timers like other recent SoCs, so it is compatible with the A23 variant. Signed-off-by: Samuel Holland <samuel@sholland.org> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220725051715.56427-1-samuel@sholland.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-07-27dt-bindings: timer: ingenic,tcu: use absolute path to other schemaKrzysztof Kozlowski1-2/+2
Absolute path to other DT schema is preferred over relative one. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20220726115937.101432-1-krzysztof.kozlowski@linaro.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-07-27clocksource/drivers/sun4i: Remove unnecessary (void*) conversionsXU pengfei1-1/+1
Remove unnecessary void* type casting. Signed-off-by: XU pengfei <xupengfei@nfschina.com> Link: https://lore.kernel.org/r/20220720020735.3771-1-xupengfei@nfschina.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-07-27dt-bindings: timer: renesas,cmt: Fix R-Car Gen4 fall-outGeert Uytterhoeven1-6/+8
Restore sort order (by family, followed by type). Update the conditional sections specifying the number of interrupts. Fixes: 525b296185b4b0ab ("dt-bindings: timer: renesas,cmt: Add r8a779f0 and generic Gen4 CMT support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/2e3863ae32e17d49f41111580f195dd34e2b769d.1658303544.git.geert+renesas@glider.be Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-07-27clocksource/drivers/tegra186: Put Kconfig option 'tristate' to 'bool'Daniel Lezcano1-1/+1
The clocksources are built-in, they are not modules. We don't know if the core time framework is ready for clockevents / clocksources as modules. Revert back this option to 'bool'. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20220718213657.1303538-1-daniel.lezcano@linaro.org
2022-07-27clocksource/drivers/timer-ti-dm: Make driver selection bool for TI K3Tony Lindgren1-1/+2
The clocksource drivers do not currently have loadable modules as pointed out by Daniel Lezcano <daniel.lezcano@linaro.org>. Let's reconsider this later on once timer removal discussion has been done, and set timer-ti-dm to bool for TI K3 SoC. Cc: Keerthy <j-keerthy@ti.com> Cc: Nishanth Menon <nm@ti.com> Cc: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20220523151448.23732-1-tony@atomide.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-07-27clocksource/drivers/timer-ti-dm: Add compatible for am6 SoCsTony Lindgren1-0/+8
Add compatible for ti,am654-timer to support the timers. For example, am654 has four timers in the MCU domain and 12 timers in the MAIN domain. Cc: Keerthy <j-keerthy@ti.com> Cc: Nishanth Menon <nm@ti.com> Cc: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20220408101715.43697-4-tony@atomide.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-07-27clocksource/drivers/timer-ti-dm: Make timer selectable for ARCH_K3Tony Lindgren3-2/+10
Let's make timer-ti-dm selectable for ARCH_K3, and add a separate option for OMAP_DM_SYSTIMER as there should be no need for it on ARCH_K3. For older TI SoCs, we are already selecting OMAP_DM_TIMER in arch/arm/mach-omap*/Kconfig. For mach-omap2, we need to now also select OMAP_DM_SYSTIMER. Cc: Keerthy <j-keerthy@ti.com> Cc: Nishanth Menon <nm@ti.com> Cc: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20220408101715.43697-3-tony@atomide.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-07-27clocksource/drivers/timer-ti-dm: Move inline functions to driver for am6Tony Lindgren2-144/+115
The __omap_dm_timer_* inline functions in the header are no longer needed outside the driver, and the header ifdefs prevent the driver working for ARCH_K3. Let's move the inline functions to the driver and drop the ifdefs and drop the unused functions __omap_dm_timer_override_errata() and __omap_dm_timer_load_start(). Cc: Keerthy <j-keerthy@ti.com> Cc: Nishanth Menon <nm@ti.com> Cc: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20220408101715.43697-2-tony@atomide.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-07-27io_uring: notification completion optimisationPavel Begunkov5-148/+67
We want to use all optimisations that we have for io_uring requests like completion batching, memory caching and more but for zc notifications. Fortunately, notification perfectly fit the request model so we can overlay them onto struct io_kiocb and use all the infratructure. Most of the fields of struct io_notif natively fits into io_kiocb, so we replace struct io_notif with struct io_kiocb carrying struct io_notif_data in the cmd cache line. Then we adapt io_alloc_notif() to use io_alloc_req()/io_alloc_req_refill(), and kill leftovers of hand coded caching. __io_notif_complete_tw() is converted to use io_uring's tw infra. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/9e010125175e80baf51f0ca63bdc7cc6a4a9fa56.1658913593.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-27io_uring: export req alloc from corePavel Begunkov2-21/+22
We want to do request allocation out of the core io_uring code, make the allocation functions public for other io_uring parts. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/0314fedd3a02a514210ba42d4720332538c65956.1658913593.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-27dt-bindings: soc: bcm: use absolute path to other schemaKrzysztof Kozlowski1-1/+1
Absolute path to other DT schema is preferred over relative one. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220726115841.101249-2-krzysztof.kozlowski@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-27dt-bindings: soc: bcm: drop quotes when not neededKrzysztof Kozlowski1-2/+2
Id and schema fields do not need quotes. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220726115841.101249-1-krzysztof.kozlowski@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-27perf bpf: Remove undefined behavior from bpf_perf_object__next()Ian Rogers1-11/+7
bpf_perf_object__next() folded the last element in the list test with the empty list test. However, this meant that offsets were computed against null and that a struct list_head was compared against a 'struct bpf_perf_object'. Working around this with clang's undefined behavior sanitizer required -fno-sanitize=null and -fno-sanitize=object-size. Remove the undefined behavior by using the regular Linux list APIs and handling the starting case separately from the end testing case. Looking at uses like bpf_perf_object__for_each(), as the constant NULL or non-NULL argument can be constant propagated, the code is no less efficient. Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: Christy Lee <christylee@fb.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Miaoqian Lin <linmq006@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Rix <trix@redhat.com> Cc: bpf@vger.kernel.org Cc: llvm@lists.linux.dev Link: https://lore.kernel.org/r/20220726220921.2567761-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-07-27perf symbol: Skip symbols if SHF_ALLOC flag is not setLeo Yan1-0/+11
Some symbols are observed with the 'st_value' field zeroed. E.g. libc.so.6 in Ubuntu contains a symbol '__evoke_link_warning_getwd' which resides in the '.gnu.warning.getwd' section. Unlike normal sections, such kind of sections are used for linker warning when a file calls deprecated functions, but they are not part of memory images, the symbols in these sections should be dropped. This patch checks the section attribute SHF_ALLOC bit, if the bit is not set, it skips symbols to avoid spurious ones. Suggested-by: Fangrui Song <maskray@google.com> Signed-off-by: Leo Yan <leo.yan@linaro.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Chang Rui <changruinj@gmail.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220724060013.171050-3-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-07-27perf symbol: Correct address for bss symbolsLeo Yan1-4/+41
When using 'perf mem' and 'perf c2c', an issue is observed that tool reports the wrong offset for global data symbols. This is a common issue on both x86 and Arm64 platforms. Let's see an example, for a test program, below is the disassembly for its .bss section which is dumped with objdump: ... Disassembly of section .bss: 0000000000004040 <completed.0>: ... 0000000000004080 <buf1>: ... 00000000000040c0 <buf2>: ... 0000000000004100 <thread>: ... First we used 'perf mem record' to run the test program and then used 'perf --debug verbose=4 mem report' to observe what's the symbol info for 'buf1' and 'buf2' structures. # ./perf mem record -e ldlat-loads,ldlat-stores -- false_sharing.exe 8 # ./perf --debug verbose=4 mem report ... dso__load_sym_internal: adjusting symbol: st_value: 0x40c0 sh_addr: 0x4040 sh_offset: 0x3028 symbol__new: buf2 0x30a8-0x30e8 ... dso__load_sym_internal: adjusting symbol: st_value: 0x4080 sh_addr: 0x4040 sh_offset: 0x3028 symbol__new: buf1 0x3068-0x30a8 ... The perf tool relies on libelf to parse symbols, in executable and shared object files, 'st_value' holds a virtual address; 'sh_addr' is the address at which section's first byte should reside in memory, and 'sh_offset' is the byte offset from the beginning of the file to the first byte in the section. The perf tool uses below formula to convert a symbol's memory address to a file address: file_address = st_value - sh_addr + sh_offset ^ ` Memory address We can see the final adjusted address ranges for buf1 and buf2 are [0x30a8-0x30e8) and [0x3068-0x30a8) respectively, apparently this is incorrect, in the code, the structure for 'buf1' and 'buf2' specifies compiler attribute with 64-byte alignment. The problem happens for 'sh_offset', libelf returns it as 0x3028 which is not 64-byte aligned, combining with disassembly, it's likely libelf doesn't respect the alignment for .bss section, therefore, it doesn't return the aligned value for 'sh_offset'. Suggested by Fangrui Song, ELF file contains program header which contains PT_LOAD segments, the fields p_vaddr and p_offset in PT_LOAD segments contain the execution info. A better choice for converting memory address to file address is using the formula: file_address = st_value - p_vaddr + p_offset This patch introduces elf_read_program_header() which returns the program header based on the passed 'st_value', then it uses the formula above to calculate the symbol file address; and the debugging log is updated respectively. After applying the change: # ./perf --debug verbose=4 mem report ... dso__load_sym_internal: adjusting symbol: st_value: 0x40c0 p_vaddr: 0x3d28 p_offset: 0x2d28 symbol__new: buf2 0x30c0-0x3100 ... dso__load_sym_internal: adjusting symbol: st_value: 0x4080 p_vaddr: 0x3d28 p_offset: 0x2d28 symbol__new: buf1 0x3080-0x30c0 ... Fixes: f17e04afaff84b5c ("perf report: Fix ELF symbol parsing") Reported-by: Chang Rui <changruinj@gmail.com> Suggested-by: Fangrui Song <maskray@google.com> Signed-off-by: Leo Yan <leo.yan@linaro.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220724060013.171050-2-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-07-27perf scripts python: Let script to be python2 compliantLeo Yan1-16/+18
The mainline kernel can be used for relative old distros, e.g. RHEL 7. The distro doesn't upgrade from python2 to python3, this causes the building error that the python script is not python2 compliant. To fix the building failure, this patch changes from the python f-string format to traditional string format. Fixes: 12fdd6c009da0d02 ("perf scripts python: Support Arm CoreSight trace data disassembly") Reported-by: Akemi Yagi <toracat@elrepo.org> Signed-off-by: Leo Yan <leo.yan@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: ElRepo <contact@elrepo.org> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220725104220.1106663-1-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-07-27tools headers cpufeatures: Sync with the kernel sourcesArnaldo Carvalho de Melo1-0/+1
To pick the changes from: 28a99e95f55c6185 ("x86/amd: Use IBPB for firmware calls") This only causes these perf files to be rebuilt: CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o And addresses this perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h' diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org Link: https://lore.kernel.org/lkml/Yt6oWce9UDAmBAtX@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-07-27Merge tag 'at91-dt-5.20-4' of ↵Arnd Bergmann5-9/+196
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt AT91 DT for v5.20 #4 It contains one new LAN966 based board, namely pcb8309, a cleanup on Makefile to sort alphabetically LAN966 entries and 2 cleanups on bindings. * tag 'at91-dt-5.20-4' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: dt-bindings: soc: microchip: use absolute path to other schema dt-bindings: soc: microchip: drop quotes when not needed ARM: dts: lan966x: keep lan966 entries alphabetically sorted ARM: dts: lan966x: add support for pcb8309 dt-bindings: arm: at91: add lan966 pcb8309 board Link: https://lore.kernel.org/r/20220727075749.2445000-1-claudiu.beznea@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-27arm64: defconfig: Sync some configs with savedefconfigJohn Garry1-3/+0
Some configs can obviously be removed when sync'ing with savedefconfig, as follows: - config SECCOMP was changed to def_bool y in commit 282a181b1a0d (" seccomp: Move config option SECCOMP to arch/Kconfig"), so no need to explicitly enable in the defconfig. - config MAILBOX is already selected by some drivers enabled in the defconfig, so no need to explicitly enable. - config QRTR was enabled in the defconfig from commit 1bdf91fd2ae82 (" arm64: defconfig: Enable Qualcomm QRTR"). However until many kernel versions later in commit 231a136fdf46 ("arm64: defconfig: enable ath11k driver"), no driver depended on config QRTR - not for building anyway. In commit 231a136fdf46, config ATH11K_PCI was enabled and this selects config QRTR, so there is no need to explicitly enable in the defconfig. Signed-off-by: John Garry <john.garry@huawei.com> Link: https://lore.kernel.org/r/1658827473-121156-1-git-send-email-john.garry@huawei.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-27wifi: plfxlc: Use eth_zero_addr() to assign zero addressXu Qiang1-1/+1
Using eth_zero_addr() to assign zero address instead of memset(). Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Xu Qiang <xuqiang36@huawei.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220701082935.110924-1-xuqiang36@huawei.com
2022-07-27hwmon: (aquacomputer_d5next) Add support for Aquacomputer Quadro fan controllerAleksa Savic3-14/+78
Extend aquacomputer_d5next driver to expose hardware temperature sensors and fans of the Aquacomputer Quadro fan controller, which communicates through a proprietary USB HID protocol. Implemented by Jack Doan [1]. Four temperature sensors and PWM controllable fans are available. The liquid flow sensor is also exposed, implemented by Leonard Anderweit [2]. Additionally, serial number, firmware version and power-on count are exposed through debugfs. This driver has been tested on x86_64. [1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/pull/5 [2] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/pull/9 Originally-from: Jack Doan <me@jackdoan.com> Originally-from: Leonard Anderweit <leonard.anderweit@gmail.com> Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com> Link: https://lore.kernel.org/r/20220727100606.9328-1-savicaleksa83@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-02 18:01:07 +0300