summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-05-28mt76: mt7615: fix hw_scan with ssid_type for specified SSID onlySean Wang2-2/+5
Fix hw_scan with ssid_type for specified SSID only The definition for ssid_type in current firmware is that ssid_type BIT(2) set actually for specified SSID + wildcard SSID. ssid_type BIT(2) and ssid_type_ext BIT(0) both set actually for specified SSID only; Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-28mt76: mt7915: fix a handful of spelling mistakesColin Ian King1-3/+3
There are some spelling mistakes in some literal strings. Fix these. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-28mt76: mt7615: switch to per-vif power_save supportLorenzo Bianconi6-38/+11
switch to per-vif ps support since mt7615 offload firmware can handle it properly. This patch allows enabling/disabling power-save support on p2p interface Tested-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-28mt76: mt7915: fix some sparse warningsRyder Lee2-14/+20
drivers/net/wireless/mediatek/mt76/mt7915/main.c:694:1: sparse: sparse: context imbalance in 'mt7915_sta_rc_update' - wrong count at exit drivers/net/wireless/mediatek/mt76/mt7915/mac.c:303:43: sparse: sparse: cast to restricted __le32 drivers/net/wireless/mediatek/mt76/mt7915/mac.c:304:43: sparse: sparse: cast to restricted __le32 drivers/net/wireless/mediatek/mt76/mt7915/mac.c:305:43: sparse: sparse: cast to restricted __le32 drivers/net/wireless/mediatek/mt76/mt7915/mac.c:319:35: sparse: sparse: cast to restricted __le32 drivers/net/wireless/mediatek/mt76/mt7915/mac.c:327:35: sparse: sparse: cast to restricted __le32 drivers/net/wireless/mediatek/mt76/mt7915/mac.c:345:41: sparse: sparse: cast to restricted __le32 drivers/net/wireless/mediatek/mt76/mt7915/mac.c:355:33: sparse: sparse: cast to restricted __le32 drivers/net/wireless/mediatek/mt76/mt7915/mac.c:451:21: sparse: sparse: invalid assignment: |= drivers/net/wireless/mediatek/mt76/mt7915/mac.c:451:21: sparse: left side has type unsigned int drivers/net/wireless/mediatek/mt76/mt7915/mac.c:451:21: sparse: right side has type restricted __le32 Fixes: e57b7901469f ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-28mt76: fix per-driver wcid range checks after wcid array size bumpFelix Fietkau6-8/+9
All drivers before MT7915 have a limit of 128 WCID entries. Stop relying on ARRAY_SIZE(dev->mt76.wcid), since it no longer reflects that limit. Fixes: 49e649c3e0a6 ("mt76: adjust wcid size to support new 802.11ax generation") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-28mt76: mt7915: fix decoded radiotap HE flagsRyder Lee1-12/+11
Move assignment of .data1 and .data2 to a single place and fix overwriting of values from the template Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-28mt76: mt7615: fix NULL pointer deref in mt7615_register_ext_phyLorenzo Bianconi1-9/+9
Fix following NULL pointer dereference in mt7615_register_ext_phy routine [ 27.648860] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000060 [ 27.657697] Mem abort info: [ 27.660495] ESR = 0x96000046 [ 27.663549] EC = 0x25: DABT (current EL), IL = 32 bits [ 27.668857] SET = 0, FnV = 0 [ 27.671910] EA = 0, S1PTW = 0 [ 27.675040] Data abort info: [ 27.677918] ISV = 0, ISS = 0x00000046 [ 27.681751] CM = 0, WnR = 1 [ 27.684717] user pgtable: 4k pages, 39-bit VAs, pgdp=000000007d8cc000 [ 27.691156] [0000000000000060] pgd=000000007d281003, pud=000000007d281003, pmd=0000000000000000 [ 27.699857] Internal error: Oops: 96000046 [#1] SMP [ 27.774939] CPU: 1 PID: 701 Comm: ash Not tainted 5.4.41 #0 [ 27.780500] Hardware name: Bananapi BPI-R64 (DT) [ 27.785108] pstate: 60000005 (nZCv daif -PAN -UAO) [ 27.789897] pc : mt7615_register_ext_phy+0x60/0x2c8 [mt7615_common] [ 27.796156] lr : mt7615_init_debugfs+0x99c/0x18e0 [mt7615_common] [ 27.802237] sp : ffffffc0115dbcb0 [ 27.805541] x29: ffffffc0115dbcb0 x28: ffffff803e309600 [ 27.810843] x27: 0000000000000000 x26: 0000000000000000 [ 27.816144] x25: ffffff803d936928 x24: ffffff803d936950 [ 27.821447] x23: 0000000000000000 x22: 0000000fffffffe0 [ 27.826749] x21: 0000000000000002 x20: ffffff8001e82620 [ 27.832050] x19: 0000000000000000 x18: 0000000000000000 [ 27.837352] x17: 0000000000000000 x16: 0000000000000000 [ 27.842653] x15: 0000000000000000 x14: 0000000000000000 [ 27.847955] x13: 0000000000000000 x12: 0000000000000000 [ 27.853256] x11: 0000000000000000 x10: 0000000000000040 [ 27.858558] x9 : ffffffc0112b3eb0 x8 : ffffffc0112b3ea8 [ 27.863859] x7 : ffffff803e400048 x6 : 0000000000000000 [ 27.869161] x5 : ffffff803e400000 x4 : 0000000000000000 [ 27.874462] x3 : 0000000000000001 x2 : 0000000000007615 [ 27.879764] x1 : 0000000000000068 x0 : ffffffc0088ccc58 [ 27.885066] Call trace: [ 27.887505] mt7615_register_ext_phy+0x60/0x2c8 [mt7615_common] [ 27.893416] mt7615_init_debugfs+0x99c/0x18e0 [mt7615_common] [ 27.899156] simple_attr_write+0xf0/0x178 [ 27.903158] debugfs_attr_write+0x4c/0x70 [ 27.907159] full_proxy_write+0x60/0x90 [ 27.910987] __vfs_write+0x18/0x40 [ 27.914379] vfs_write+0xb0/0x1b8 [ 27.917685] ksys_write+0x4c/0xc8 [ 27.920989] __arm64_sys_write+0x18/0x20 Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-28mt76: mt7915: fix sparse warnings: incorrect type initializerRyder Lee1-1/+1
drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:2317:31: sparse: sparse: incorrect type in initializer (different base types) Fixes: 5517f78b0063 ("mt76: mt7915: enable firmware module debug support") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-28mt76: mt7915: fix some sparse warningsRyder Lee1-6/+5
This fixes the following sparse warning: drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:253:16: sparse: sparse: mixing different enum types: drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:253:16: sparse: unsigned int enum mt7915_txq_id drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:253:16: sparse: unsigned int enum mt76_txq_id drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:758:63: sparse: sparse: incorrect type in argument 2 (different address spaces) drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:758:63: sparse: expected unsigned char const [usertype] *ies drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:758:63: sparse: got unsigned char const [noderef] <asn:4> * drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:1390:23: sparse: sparse: incorrect type in argument 1 (different base types) drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:1390:23: sparse: expected unsigned int w drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:1390:23: sparse: got restricted __le32 [usertype] supp_ht_mcs drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:1390:23: sparse: sparse: restricted __le32 degrades to integer drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:1429:60: sparse: sparse: bad assignment (>>=) to restricted __le16 drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:1773:16: sparse: sparse: restricted __le32 degrades to integer Fixes: 6094f86fb371 ("mt76: mt7915: add HE bss_conf support for interfaces") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-28mt76: mt7915: add spatial reuse supportRyder Lee4-1/+34
Enable or disable OBSS PD when the bss config changes or we assoc to an AP that broadcasts the IE. With this patch, we can get ~20% gain in OBSS OTA environment. Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-28mt76: mt76x02: remove check in mt76x02_mcu_msg_sendLorenzo Bianconi1-1/+1
mt76x02_mcu_msg_send is run just by mmio code so get rid of mt76_is_mmio() check Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-28mt76: mt7615: introduce remain_on_channel supportLorenzo Bianconi8-2/+179
Introduce remain_on_channel support to mt7615 driver if the device is running offload firmware Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-28sctp: fix typo sctp_ulpevent_nofity_peer_addr_changeJonas Falkevik3-6/+6
change typo in function name "nofity" to "notify" sctp_ulpevent_nofity_peer_addr_change -> sctp_ulpevent_notify_peer_addr_change Signed-off-by: Jonas Falkevik <jonas.falkevik@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net/tls: Add force_resync for driver resyncTariq Toukan2-4/+17
This patch adds a field to the tls rx offload context which enables drivers to force a send_resync call. This field can be used by drivers to request a resync at the next possible tls record. It is beneficial for hardware that provides the resync sequence number asynchronously. In such cases, the packet that triggered the resync does not contain the information required for a resync. Instead, the driver requests resync for all the following TLS record until the asynchronous notification with the resync request TCP sequence arrives. A following series for mlx5e ConnectX-6DX TLS RX offload support will use this mechanism. Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28Merge branch 'net_sched-reduce-the-number-of-qdisc-resets'David S. Miller3-43/+110
Cong Wang says: ==================== net_sched: reduce the number of qdisc resets This patchset aims to reduce the number of qdisc resets during qdisc tear down. Patch 1~3 are preparation for their following patches, especially patch 2 and patch 3 add a few tracepoints so that we can observe the whole lifetime of qdisc's. Patch 4 and patch 5 are the ones do the actual work. Please find more details in each patch description. Vaclav Zindulka tested this patchset and his large ruleset with over 13k qdiscs defined got from 22s to 520ms. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net_sched: get rid of unnecessary dev_qdisc_reset()Cong Wang1-16/+0
Resetting old qdisc on dev_queue->qdisc_sleeping in dev_qdisc_reset() is redundant, because this qdisc, even if not same with dev_queue->qdisc, is reset via qdisc_put() right after calling dev_graft_qdisc() when hitting refcnt 0. This is very easy to observe with qdisc_reset() tracepoint and stack traces. Reported-by: Václav Zindulka <vaclav.zindulka@tlapnet.cz> Tested-by: Václav Zindulka <vaclav.zindulka@tlapnet.cz> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net_sched: avoid resetting active qdisc for multiple timesCong Wang1-14/+23
Except for sch_mq and sch_mqprio, each dev queue points to the same root qdisc, so when we reset the dev queues with netdev_for_each_tx_queue() we end up resetting the same instance of the root qdisc for multiple times. Avoid this by checking the __QDISC_STATE_DEACTIVATED bit in each iteration, so for sch_mq/sch_mqprio, we still reset all of them like before, for the rest, we only reset it once. Reported-by: Václav Zindulka <vaclav.zindulka@tlapnet.cz> Tested-by: Václav Zindulka <vaclav.zindulka@tlapnet.cz> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net_sched: add a tracepoint for qdisc creationCong Wang3-1/+29
With this tracepoint, we could know when qdisc's are created, especially those default qdisc's. Sample output: tc-736 [001] ...1 56.230107: qdisc_create: dev=ens3 kind=pfifo parent=1:0 tc-736 [001] ...1 56.230113: qdisc_create: dev=ens3 kind=hfsc parent=ffff:ffff tc-738 [001] ...1 56.256816: qdisc_create: dev=ens3 kind=pfifo parent=1:100 tc-739 [001] ...1 56.267584: qdisc_create: dev=ens3 kind=pfifo parent=1:200 tc-740 [001] ...1 56.279649: qdisc_create: dev=ens3 kind=fq_codel parent=1:100 tc-741 [001] ...1 56.289996: qdisc_create: dev=ens3 kind=pfifo_fast parent=1:200 tc-745 [000] .N.1 111.687483: qdisc_create: dev=ens3 kind=ingress parent=ffff:fff1 Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net_sched: add tracepoints for qdisc_reset() and qdisc_destroy()Cong Wang2-0/+56
Add two tracepoints for qdisc_reset() and qdisc_destroy() to track qdisc resetting and destroying. Sample output: tc-756 [000] ...3 138.355662: qdisc_reset: dev=ens3 kind=pfifo_fast parent=ffff:ffff handle=0:0 tc-756 [000] ...1 138.355720: qdisc_reset: dev=ens3 kind=pfifo_fast parent=ffff:ffff handle=0:0 tc-756 [000] ...1 138.355867: qdisc_reset: dev=ens3 kind=pfifo_fast parent=ffff:ffff handle=0:0 tc-756 [000] ...1 138.355930: qdisc_destroy: dev=ens3 kind=pfifo_fast parent=ffff:ffff handle=0:0 tc-757 [000] ...2 143.073780: qdisc_reset: dev=ens3 kind=fq_codel parent=ffff:ffff handle=8001:0 tc-757 [000] ...1 143.073878: qdisc_reset: dev=ens3 kind=fq_codel parent=ffff:ffff handle=8001:0 tc-757 [000] ...1 143.074114: qdisc_reset: dev=ens3 kind=fq_codel parent=ffff:ffff handle=8001:0 tc-757 [000] ...1 143.074228: qdisc_destroy: dev=ens3 kind=fq_codel parent=ffff:ffff handle=8001:0 Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net_sched: use qdisc_reset() in qdisc_destroy()Cong Wang1-13/+3
qdisc_destroy() calls ops->reset() and cleans up qdisc->gso_skb and qdisc->skb_bad_txq, these are nearly same with qdisc_reset(), so just call it directly, and cosolidate the code for the next patch. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28drivers: ipa: remove discription of nonexistent elementWang Wenhu1-1/+0
No element named "client" exists within "struct ipa_endpoint". It might be a heritage forgotten to be removed. Delete it now. Signed-off-by: Wang Wenhu <wenhu.wang@vivo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28drivers: ipa: fix typoes for ipaWang Wenhu2-2/+2
Change "transactio" -> "transaction". Also an alignment correction. Signed-off-by: Wang Wenhu <wenhu.wang@vivo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28Merge branch 'tcp-tcp_v4_err-cleanups'David S. Miller1-49/+54
Eric Dumazet says: ==================== tcp: tcp_v4_err() cleanups This series is a followup of patch 239174945dac ("tcp: tcp_v4_err() icmp skb is named icmp_skb"). Move the RFC 6069 code into a helper, and rename icmp_skb to standard skb name so that tcp_v4_err() and tcp_v6_err() are using consistent names. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28tcp: rename tcp_v4_err() skb parameterEric Dumazet1-9/+9
This essentially reverts 4d1a2d9ec1c1 ("Revert Backoff [v3]: Rename skb to icmp_skb in tcp_v4_err()") Now we have tcp_ld_RTO_revert() helper, we can use the usual name for sk_buff parameter, so that tcp_v4_err() and tcp_v6_err() use similar names. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28tcp: add tcp_ld_RTO_revert() helperEric Dumazet1-40/+45
RFC 6069 logic has been implemented for IPv4 only so far, right in the middle of tcp_v4_err() and was error prone. Move this code to one helper, to make tcp_v4_err() more readable and to eventually expand RFC 6069 to IPv6 in the future. Also perform sock_owned_by_user() check a bit sooner. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Tested-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28Merge branch 'hns3-next'David S. Miller3-7/+16
Huazhong Tan says: ==================== net: hns3: misc updates for -next This patchset includes some misc updates for the HNS3 ethernet driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: hns3: add a print for initializing CMDQ when reset pendingHuazhong Tan1-0/+3
When initializing CMDQ fails because of reset pending, there is no hint for debugging, so adds a log for it. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: hns3: remove unnecessary MAC enable in app loopbackYufeng Mo1-2/+0
Packets will not pass through MAC during app loopback. Therefore, it is meaningless to enable MAC while doing app loopback. This patch removes this unnecessary action. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: hns3: change the order of reinitializing RoCE and NIC client during resetYufeng Mo1-5/+4
The HNS RDMA driver will support VF device later, whose re-initialization should be done after PF's. This patch changes the order of hclge_reset_prepare_up() and hclge_notify_roce_client(), so that PF's RoCE client will be reinitialized before VF's. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: hns3: add a resetting check in hclgevf_init_nic_client_instance()Guangbin Huang1-0/+9
To prevent from initializing VF NIC client in reset handling state, this patch adds resetting check in hclgevf_init_nic_client_instance(). Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28Merge branch 'net-mscc-allow-forwarding-ioctl-operations-to-attached-PHYs'David S. Miller2-12/+14
Antoine Tenart says: ==================== net: mscc: allow forwarding ioctl operations to attached PHYs These two patches allow forwarding ioctl to the PHY MII implementation, and support is added for offloading timestamping operations to compatible attached PHYs. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: mscc: allow offloading timestamping operations to the PHYAntoine Tenart2-2/+6
This patch adds support for offloading timestamping operations not only to the Ocelot switch (as already supported) but to compatible PHYs. When both the PHY and the Ocelot switch support timestamping operations, the PHY implementation is chosen as the timestamp will happen closer to the medium. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: mscc: use the PHY MII ioctl interface when possibleAntoine Tenart1-11/+9
Allow ioctl to be implemented by the PHY, when a PHY is attached to the Ocelot switch. In case the ioctl is a request to set or get the hardware timestamp, use the Ocelot switch implementation for now. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27net: dsa: felix: accept VLAN config regardless of bridge VLAN awareness stateVladimir Oltean1-0/+1
The ocelot core library is written with the idea in mind that the VLAN table is populated by the bridge. Otherwise, not even a sane default pvid is provided: in standalone mode, the default pvid is 0, and the core expects the bridge layer to change it to 1. So without this patch, the VLAN table is completely empty at the end of the commands below, and traffic is broken as a result: ip link add dev br0 type bridge vlan_filtering 0 && ip link set dev br0 up for eth in $(ls /sys/bus/pci/devices/0000\:00\:00.5/net/); do ip link set dev $eth master br0 ip link set dev $eth up done ip link set dev br0 type bridge vlan_filtering 1 Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27net: add large ecmp group nexthop testsStephen Worley1-2/+82
Add a couple large ecmp group nexthop selftests to cover the remnant fixed by d69100b8eee27c2d60ee52df76e0b80a8d492d34. The tests create 100 x32 ecmp groups of ipv4 and ipv6 and then dump them. On kernels without the fix, they will fail due to data remnant during the dump. Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com> Reviewed-by: David Ahern <dsahern@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27mtk-star-emac: mark PM functions as __maybe_unusedArnd Bergmann1-2/+2
Without CONFIG_PM, the compiler warns about two unused functions: drivers/net/ethernet/mediatek/mtk_star_emac.c:1472:12: error: unused function 'mtk_star_suspend' [-Werror,-Wunused-function] drivers/net/ethernet/mediatek/mtk_star_emac.c:1488:12: error: unused function 'mtk_star_resume' [-Werror,-Wunused-function] Mark these as __maybe_unused. Fixes: 8c7bd5a454ff ("net: ethernet: mtk-star-emac: new driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27bridge: mrp: Rework the MRP netlink interfaceHoratiu Vultur4-50/+290
This patch reworks the MRP netlink interface. Before, each attribute represented a binary structure which made it hard to be extended. Therefore update the MRP netlink interface such that each existing attribute to be a nested attribute which contains the fields of the binary structures. In this way the MRP netlink interface can be extended without breaking the backwards compatibility. It is also using strict checking for attributes under the MRP top attribute. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27net: dsa: b53: remove redundant premature assignment to new_pvidColin Ian King1-1/+0
Variable new_pvid is being assigned with a value that is never read, the following if statement updates new_pvid with a new value in both of the if paths. The assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27net: ethernet: mtk-star-emac: fix error path in RX handlingBartosz Golaszewski1-1/+2
The dma_addr field in desc_data must not be overwritten until after the new skb is mapped. Currently we do replace it with uninitialized value in error path. This change fixes it by moving the assignment before the label to which we jump after mapping or allocation errors. Fixes: 8c7bd5a454ff ("net: ethernet: mtk-star-emac: new driver") Reported-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Tested-by: Nathan Chancellor <natechancellor@gmail.com> # build Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27mlxsw: spectrum_router: remove redundant initialization of pointer br_devColin Ian King1-1/+1
The pointer br_dev is being initialized with a value that is never read and is being updated with a new value later on. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27nexthop: Fix type of event_type in call_nexthop_notifiersNathan Chancellor1-1/+1
Clang warns: net/ipv4/nexthop.c:841:30: warning: implicit conversion from enumeration type 'enum nexthop_event_type' to different enumeration type 'enum fib_event_type' [-Wenum-conversion] call_nexthop_notifiers(net, NEXTHOP_EVENT_DEL, nh); ~~~~~~~~~~~~~~~~~~~~~~ ^~~~~~~~~~~~~~~~~ 1 warning generated. Use the right type for event_type so that clang does not warn. Fixes: 8590ceedb701 ("nexthop: add support for notifiers") Link: https://github.com/ClangBuiltLinux/linux/issues/1038 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27net: phy: at803x: add cable diagnostics support for ATH9331 and ATH8032Oleksij Rempel1-2/+16
Add support for Atheros 100Base-T PHYs. The only difference seems to be the ability to test 2 pairs instead of 4 and the lack of 1000Base-T specific register. Only the ATH9331 was tested with this patch. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27Merge branch 'Raw-PHY-TDR-data'David S. Miller10-13/+818
Andrew Lunn says: ==================== Raw PHY TDR data Some ethernet PHYs allow access to raw TDR data in addition to summary diagnostics information. Add support for retrieving this data via netlink ethtool. The basic structure in the core is the same as for normal phy diagnostics, the PHY driver simply uses different helpers to fill the netlink message with different data. There is a graphical tool under development, as well a ethtool(1) which can dump the data as text and JSON. A patched ethtool(1) can be found in https://github.com/lunn/ethtool.git feature/cable-test-v5 Thanks for Chris Healy for lots of testing. v2: See the individual patches but: Pass distances in centimeters, not meters Allow the PHY to round distances to what it supports and report what it actually used along with the results. Make the Marvell PHY use steps a multiple of 0.805 meters, its native step size. v3: Move the TDR configuration into a structure Add a range check on step Use NL_SET_ERR_MSG_ATTR() when appropriate Move TDR configuration into a nest Document attributes in the request Unsquash the last two patches ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27net: phy: marvell: Configure TDR pulse based on measurement lengthAndrew Lunn1-2/+23
When performing a TDR measurement for a short distance, the pulse width should be low, to help differentiate between the outgoing pulse and any reflection. For longer distances, the pulse should be wider, to help with attenuation. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27net : phy: marvell: Speedup TDR data retrieval by only changing page onceAndrew Lunn1-12/+19
Getting the TDR data requires a large number of MDIO bus transactions. The number can however be reduced if the page is only changed once. Add the needed locking to allow this, and make use of unlocked read/write methods where needed. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27net: ethtool: Allow PHY cable test TDR data to configuredAndrew Lunn6-27/+197
Allow the user to configure where on the cable the TDR data should be retrieved, in terms of first and last sample, and the step between samples. Also add the ability to ask for TDR data for just one pair. If this configuration is not provided, it defaults to 1-150m at 1m intervals for all pairs. Signed-off-by: Andrew Lunn <andrew@lunn.ch> v3: Move the TDR configuration into a structure Add a range check on step Use NL_SET_ERR_MSG_ATTR() when appropriate Move TDR configuration into a nest Document attributes in the request Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27net: phy: marvell: Add support for amplitude graphAndrew Lunn1-1/+231
The Marvell PHYs can measure the amplitude of the returned signal for a given distance. Implement this option of the cable test infrastructure. When reporting the step, convert the distance into cm. Signed-off-by: Andrew Lunn <andrew@lunn.ch> v2: Step based on the measurement resolution, and convert this to cm. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27net: ethtool: Add helpers for cable test TDR dataAndrew Lunn2-1/+100
Add helpers for returning raw TDR helpers in netlink messages. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27net: ethtool: Add generic parts of cable test TDRAndrew Lunn7-10/+144
Add the generic parts of the code used to trigger a cable test and return raw TDR data. Any PHY driver which support this must implement the new driver op. Signed-off-by: Andrew Lunn <andrew@lunn.ch> v2 Update nxp-tja11xx for API change. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27net: ethtool: Add attributes for cable test TDR dataAndrew Lunn2-0/+144
Some Ethernet PHYs can return the raw time domain reflectromatry data. Add the attributes to allow this data to be requested and returned via netlink ethtool. Signed-off-by: Andrew Lunn <andrew@lunn.ch> v2: m -> cm Report what the PHY actually used for start/stop/step. Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-27 15:09:41 +0300