summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-03-13arm64: dts: renesas: r8a7795: Add missing SYS-DMAC2 dmasGeert Uytterhoeven1-20/+30
On R-Car H3, on-chip peripheral modules that can make use of DMA are wired to either SYS-DMAC0 only, or to both SYS-DMAC1 and SYS-DMAC2. Add the missing DMA properties pointing to SYS-DMAC2 for HSCIF[0-2], SCIF[0125], and I2C[0-2]. These were initially left out because early firmware versions prohibited using SYS-DMAC2. This restriction has been lifted in IPL and Secure Monitor Rev1.0.6 (released on Feb 25, 2016). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: dts: renesas: r8a7795: Add IPMMU-PV1 device nodeSimon Horman2-0/+10
Add r8a7795 IPMMU-PV1 and keep it disabled by default. This device is not present in r8a7795 ES1.x and is removed from the DT of those SoCs. This corrects an omission in 3b7e7848f0e8 ("arm64: dts: renesas: r8a7795: Add IPMMU device nodes") This does not have any runtime effect. Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
2018-03-13arm64: dts: renesas: r8a77970: sort subnodes of root node alphabeticallyGeert Uytterhoeven1-5/+5
Sort root sub-nodes alphabetically for allow for easier maintenance of this file. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: dts: renesas: eagle: add I2C0 supportSergei Shtylyov1-0/+20
Define the Eagle board dependent part of the I2C0 device node. The I2C0 bus is populated by ON Semiconductor PCA9653 I/O expander and Analog Devices ADV7511W HDMI transmitter (but we're only describing the former chip now). Based on the original (and large) patch by Vladimir Barinov. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: dts: renesas: r8a77970: add I2C supportSergei Shtylyov1-0/+93
Define the generic R8A77970 parts of the I2C[0-4] device node. Based on the original (and large) patch by Daisuke Matsushita <daisuke.matsushita.ns@hitachi.com>. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: dts: renesas: r8a77965-salvator-xs: Add SoC name to file headerGeert Uytterhoeven1-1/+1
Document clearly which SoC this DTS applies to, to distinguish from Salvator-XS boards equipped with other SoCs. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: dts: renesas: r8a77965: Add EtherAVB device nodeJacopo Mondi1-3/+40
Populate the ethernet@e6800000 device node to enable Ethernet interface for R-Car M3-N (R8A77965) SoC. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: dts: renesas: r8a77970: Set EtherAVB phy mode to "rgmii"Jacopo Mondi1-1/+1
Set the "phy-mode" property of EtherAVB device to "rgmii" and let board files override it if the installed PHY layer provides delays for the RX/TX channels. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: dts: renesas: r8a77995: Set EtherAVB phy mode to "rgmii"Jacopo Mondi1-1/+1
Set the "phy-mode" property of EtherAVB device to "rgmii" and let board files override it if the installed PHY layer provides delays for the RX/TX channels. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: dts: renesas: r8a7795: Set EtherAVB phy mode to "rgmii"Jacopo Mondi1-1/+1
Set the "phy-mode" property of EtherAVB device to "rgmii" and let board files override it if the installed PHY layer provides delays for the RX/TX channels. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: dts: renesas: r8a7796: Set EtherAVB phy mode to "rgmii"Jacopo Mondi1-1/+1
Set the "phy-mode" property of EtherAVB device to "rgmii" and let board files override it if the installed PHY layer provides delays for the RX/TX channels. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: dts: renesas: v3msk: Override EtherAVB phy-modeJacopo Mondi1-0/+1
As the PHY interface installed on the V3MSK board provides TX and RX channels delays, make the "phy-mode" property a board-specific one, meant to override the one specified in the SoC DTSI. Follow up patches will reset the r8a77970 SoC DTSI to use "rgmii" mode and let the board file override that. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: dts: renesas: eagle: Override EtherAVB phy-modeJacopo Mondi1-0/+1
As the PHY interface installed on the Eagle board provides TX and RX channels delays, make the "phy-mode" property a board-specific one, meant to override the one specified in the SoC DTSI. Follow up patches will reset the r8a77970 SoC DTSI to use "rgmii" mode and let the board file override that. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: dts: renesas: draak: Override EtherAVB phy-modeJacopo Mondi1-0/+1
As the PHY interface installed on the Draak board, provides TX channel delay, make the "phy-mode" property a board-specific one, meant to override the one specified in the SoC DTSI. Follow up patches will reset the r8a77995 SoC DTSI to use "rgmii" mode and let the board file override that. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: dts: renesas: ulcb: Override EtherAVB phy-modeJacopo Mondi1-0/+1
As the PHY interface installed on the ULCB board provides TX channel delay, make the "phy-mode" property a board-specific one, meant to override the one specified in the SoC DTSI. Follow up patches will reset the r8a7795/96 SoC DTSI to use "rgmii" mode\ and let the board files override that. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: dts: renesas: salvator-common: Override EtherAVB phy-modeJacopo Mondi1-0/+1
As the PHY interface installed on the Salvator-X[S] board, provides TX channel delay, make the "phy-mode" property a board-specific one, meant to override the one specified in the SoC DTSI. Follow up patches will reset the r8a7795/96/965 SoC DTSI to use "rgmii" mode and let the board files override that. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: dts: renesas: r8a77965: Add INTC-EX device nodeGeert Uytterhoeven1-1/+10
Populate the device node for the Interrupt Controller for External Devices (INTC-EX) on R-Car M3-N, which serves external IRQ pins IRQ[0-5]. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: dts: renesas: r8a77965: Add IIC-DVFS device nodeGeert Uytterhoeven1-2/+14
Populate the device node for the IIC Bus Interface for DVFS (IIC for DVFS) on R-Car M3-N, and add an alias to fix its bus number. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: dts: renesas: Add support for Salvator-XS with R-Car M3-NTakeshi Kihara2-1/+22
Add initial support for the Renesas Salvator-XS (Salvator-X 2nd version) development board equipped with an R-Car M3-N SiP. Most features are enabled through the shared salvator-xs.dtsi board description. The memory configuration is specific to the M3-N SiP. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> [geert: Switch to SPDX-License-Identifier, update patch description] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: dts: renesas: r8a77965: Move usb2_phy1 upJacopo Mondi1-5/+5
Move "usb2_ph1" place-holder device node next to "usb2_phy0" one. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: dts: renesas: r8a77965: Add #interrupt-cells propertyJacopo Mondi1-0/+2
Add "#interrupt-cells" property and "interrupt-controller" label to "interrupt-controller@e61c0000" device node. This silences the following DTC compiler warnings: Warning (interrupts_property): Missing interrupt-controller or interrupt-map property in /soc/interrupt-controller@e61c0000 Warning (interrupts_property): Missing #interrupt-cells in interrupt-parent /soc/interrupt-controller@e61c000 Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: dts: renesas: r8a77965: Add #pwm-cells propertyJacopo Mondi1-0/+1
Add "#pwm-cells" property to "pwm@e6e31000" device node. This silences the following DTC compiler warning: Warning (pwms_property): Missing property '#pwm-cells' in node /soc/pwm@e6e31000 or bad phandle (referred from /backlight:pwms[0]) Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: dts: renesas: r8a77965: Add #phy-cells propertyJacopo Mondi1-0/+1
Add "#phy-cells" property to "usb-phy@e65ee000" device node. This silences the following DTC compiler warning: Warning (phys_property): Missing property '#phy-cells' in node /soc/usb-phy@e65ee000 or bad phandle (referred from /soc/usb@ee020000:phys[0]) Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: dts: renesas: r8a77965: Remove stale reg propertyJacopo Mondi1-1/+0
Remove "reg" property from cache-controller-0 device node as it does not have any unit address. This silences the following DTC compiler warning: Warning (unit_address_vs_reg): Node /cpus/cache-controller-0 has a reg or ranges property, but no unit name Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: dts: renesas: r8a77965: Add #address-cells and #size-cellsJacopo Mondi1-0/+25
Add "#address-cells" and "#size-cells" properties to all place-holder nodes that have children nodes defined by salvator-x[s].dtsi device tree. This silences the following DTC compiler warnings: Warning (reg_format): "reg" property in /soc/.. has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) Warning (avoid_default_addr_size): Relying on default #address-cells value for /soc/... Warning (avoid_default_addr_size): Relying on default #size-cells value for /soc/... Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: dts: renesas: r8a77965: Add "reg" propertiesJacopo Mondi1-0/+51
Add "reg" properties to place-holder nodes with unit address defined for R-Car M3-N SoC. This silences the following DTC compiler warning: Warning (unit_address_vs_reg): Node /soc/... has a unit name, but no reg property Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: dts: renesas: r8a77965: Add GPIO nodesJacopo Mondi1-8/+96
Add GPIO nodes to r8a77965 SoC device tree file. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: dts: renesas: r8a77965: Add SCIF device nodesJacopo Mondi1-6/+79
Add SCIF[0-5] device nodes for M3-N (r8a77965) SoC. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: dts: renesas: r8a77965: Add dmac device nodsJacopo Mondi1-3/+93
Add dmac[0-2] device nodes for R-Car M3-N (r8a77965) SoC. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: dts: renesas: Add R-Car Salvator-x M3-N supportJacopo Mondi2-0/+22
Add basic support for R-Car Salvator-X M3-N (R8A77965) board. Based on original work from: Takeshi Kihara <takeshi.kihara.df@renesas.com> Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: dts: renesas: initial R8A77965 SoC device treeJacopo Mondi1-0/+490
Basic support for the Gen 3 R-Car M3-N SoC. Based on original work from: Takeshi Kihara <takeshi.kihara.df@renesas.com> Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: add Renesas R8A77965 supportJacopo Mondi1-0/+6
Add configuration option for the R-Car M3-N (R8A77965) SoC. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: dts: renesas: r8a7795: Update OPPs to support CA53 dfsDien Pham1-0/+10
Describe frequencies, other than the default for CA53 cores. This is a pre-requisite for using providing alternative frequencies for use with CPUFreq with these cores. Signed-off-by: Dien Pham <dien.pham.ry@renesas.com> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: dts: renesas: r8a7796: Update OPPs to support CA53 dfsDien Pham1-0/+16
Describe frequencies, other than the default for CA53 cores. This is a pre-requisite for using providing alternative frequencies for use with CPUFreq with these cores. Signed-off-by: Dien Pham <dien.pham.ry@renesas.com> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-21arm64: dts: renesas: condor: add EtherAVB supportSergei Shtylyov1-0/+13
Define the Condor board dependent part of the EtherAVB device node. Based on the original (and large) patch by Vladimir Barinov. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-21arm64: dts: renesas: initial Condor board device treeSergei Shtylyov2-0/+46
Add the initial device tree for the R8A77980 SoC based Condor board. The board has 1 debug serial port (SCIF0); include support for it, so that the serial console can work. Based on the original (and large) patch by Vladimir Barinov. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> [simon: correct memory size to 0x78000000 (2GiB)] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-21arm64: dts: renesas: r8a77980: add EtherAVB supportSergei Shtylyov1-0/+44
Define the generic R8A77980 part of the EtherAVB device node. Based on the original (and large) patch by Vladimir Barinov. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-21arm64: dts: renesas: r8a77980: add [H]SCIF supportSergei Shtylyov1-0/+151
Describe [H]SCIF ports in the R8A77980 device tree. Based on the original (and large) patch by Vladimir Barinov. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-16arm64: dts: renesas: draak: Enable DUKieran Bingham1-0/+51
Enable the DU, providing only the VGA output for now. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-16arm64: dts: renesas: r8a7796: Fix register mappings on VSPsKieran Bingham1-3/+3
The VSPD includes a CLUT on RPF2. Ensure that the register space is mapped correctly to support this. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-16arm64: dts: renesas: r8a7795: Fix register mappings on VSPsKieran Bingham1-3/+3
The VSPD includes a CLUT on RPF2. Ensure that the register space is mapped correctly to support this. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-16arm64: dts: renesas: r8a7795-es1: Fix register mappings on VSPsKieran Bingham1-1/+1
The VSPD includes a CLUT on RPF2. Ensure that the register space is mapped correctly to support this. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-15arm64: dts: renesas: r8a77995: add DU supportKieran Bingham1-0/+35
Define the generic r8a77995 part of the DU device node. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-15arm64: dts: renesas: draak: enable SDHI2Ulrich Hecht1-0/+44
The single SDHI controller is connected to eMMC. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-15arm64: dts: renesas: r8a77995: add VSP instancesKieran Bingham1-0/+30
The r8a77995 has a VSPBS to support image processing such as blending of two input images, and has two VSPDs to handle display pipelines with a DU. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [simon: updated base address of vsp node to fea28000] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-15arm64: dts: renesas: r8a77995: add FCPV nodesKieran Bingham1-0/+27
The FCPVB handles the interface between the VSPB and memory, while the FCPVD handles the interface between the VSPD and memory. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-15arm64: dts: renesas: eagle: specify EtherAVB PHY IRQSergei Shtylyov1-0/+2
Specify EtherAVB PHY IRQ in the Eagle board's device tree, now that we have the GPIO support (previously phylib had to resort to polling). Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-15arm64: dts: renesas: r8a77970: add GPIO supportSergei Shtylyov1-0/+90
Describe all 6 GPIO controllers in the R8A77970 device tree. Based on the original (and large) patch by Daisuke Matsushita <daisuke.matsushita.ns@hitachi.com>. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-13arm64: dts: renesas: eagle: add SCIF0 pinsSergei Shtylyov1-0/+10
Add the (previously omitted) SCIF0 pin data to the Eagle board's device tree. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-13arm64: dts: renesas: r8a77970: add PFC supportSergei Shtylyov1-0/+5
Define the generic R8A77970 part of the PFC device node. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-26 15:55:56 +0300